Sea-Dog 3364111 Low Profile Pop-Out Deck Plate, A: 6" , B:5-1/4", C=4-1/8", D: 3/16", Black, #8 Fh - 336411-1 - 354-3364111F1

Features an integrated, pop-up lever to make opening and closing a snap. The concealed fasteners give a smooth look with a very low profile (.1875"), this deck plate is great for tight places and high traffic areas. Rubber O-ring provides a watertight seal and three-tab snap provides a secure fit. Constructed of UV resistant injection molded Polypropylene for its structural strength, as well as weather and corrosion resistance. Installs with six #8 FH fasteners (not included).

Sea-Dog 3364101 Low Profile Pop-Out Deck Plate, A: 6" , B:5-1/4", C=4-1/8", D: 3/16", White, #8 Fh - 336410-1 - 354-3364101F1

Features an integrated, pop-up lever to make opening and closing a snap. The concealed fasteners give a smooth look with a very low profile (.1875"), this deck plate is great for tight places and high traffic areas. Rubber O-ring provides a watertight seal and three-tab snap provides a secure fit. Constructed of UV resistant injection molded Polypropylene for its structural strength, as well as weather and corrosion resistance. Installs with six #8 FH fasteners (not included).

Sea-Dog 3316011 Drain Cover, 2-1/2" - 331601-1 - 354-3316011F1

Stamped 304 StainlessVent Area .85 Sq. In.Fasteners: #6 RH

Sea-Dog 331600 Drain Cover, 3-1/4" - 331600-1 - 354-3316001F1

Stamped 304 StainlessVent Area 2.11 Sq. In.Fasteners: #6 RH

Sea-Dog 331455 Butterfly Vent - Side Knob, 5" - 331455 - 354-331455F1

Constructed of corrosion resistant 304 stainless steel. Promote air flow helping to preventing mold and mildew. Features a side knob that allows for easy adjustment of the opening. Fasteners sold separately.

Sea-Dog 331440 Butterfly Vent - Center Knob, 4" - 331440-1 - 354-3314401F1

Constructed of corrosion resistant 304 stainless steel these butterfly vents promote air flow to prevent mold, mildew and associated odors. Features a center knob that allows for easy adjustment of the opening.

Sea-Dog 3314251 Round Louvered Vent, 5" - 331425-1 - 354-3314251F1

Constructed of corrosion resistant stamped 304 stainless steel these round air ventilation louvers allow air in while keeping water out. Installs with four #6 FH fasteners (not included).

Sea-Dog 331424 Round Louvered Vent, 4" - 331424 - 354-331424F1

Constructed of corrosion resistant stamped 304 stainless steel these round air ventilation louvers allow air in while keeping water out. Installs with four #6 FH fasteners (not included).

Sea-Dog 331280 Stainless Louvered Vent, 10-Louver - 331280 - 354-331280F1

Stamped 316 Stainless Steel. 331280 does not have a collector box available.

Sea-Dog 331204 Collector Box - 331204 - 354-331204F1

Constructed of injection molded polypropylene these collector boxes are designed to be used in conjunction with a louvered vent to facilitate air intake and exhaust. For use with either the 331200 or 331201 stainless louvered vents or 337210, 337211, or 337212 injection molded ABS louvered vents. Interchangeable with Attwood® part number's 1341 and 1342.

Sea-Dog 331203 Collector Box - 331203 - 354-331203F1

Constructed of injection molded polypropylene these collector boxes are designed to be used in conjunction with a louvered vent to facilitate air intake and exhaust. For use with either the 331200 or 331201 stainless louvered vents or 337210, 337211, or 337212 injection molded ABS louvered vents. Interchangeable with Attwood® part number's 1341 and 1342. 331203 can accept the 337600 3" collector box hose adapter.

Sea-Dog 331202 Collector Box - 331202 - 354-331202F1

Constructed of injection molded polypropylene these collector boxes are designed to be used in conjunction with a louvered vent to facilitate air intake and exhaust. For use with either the 331200 or 331201 stainless louvered vents or 337210, 337211, or 337212 injection molded ABS louvered vents. Interchangeable with Attwood® part number's 1341 and 1342. 331202 is available without holes to allow for custom installations.

Sea-Dog 331201 Stainless Recessed Louvered Vent - 331201 - 354-331201F1

Corrosion resistant 316 stainless steel. Use with a collector box to facilitate air intake and exhaust. Designed with recessed louvers to create a flush vent surface area reducing possible damage to the vent as well as preventing chafing to mooring lines, fishing lines, etc.

Sea-Dog 331200 Stainless Louvered Vent - 331200 - 354-331200F1

Corrosion resistant 316 stainless steel vents are designed to be used in conjunction with a collector box to facilitate air intake and exhaust. Installs w/six #6 RH fasteners (not included).

Sea-Dog 329808 50' Coaxial Cable Assembly - 329808-1 - 354-3298081F1

Nickel plated brass coaxial cable assemblies. RG-58U Coax cable is pre-assembled with PL-259 fittings on both ends for quick installation of hardware.

Sea-Dog 3298061 20' Coaxial Cable Assembly - 329806-1 - 354-3298061F1

Nickel plated brass coaxial cable assemblies. RG-58U Coax cable is pre-assembled with PL-259 fittings on both ends for quick installation of hardware.

Sea-Dog 3298041 Coaxial Cable Assembly, A:10", B: 2", C:1-3/4", D:11/16", - 329804-1 - 354-3298041F1

Nickel plated brass coaxial cable assemblies. RG-58U Coax cable is pre-assembled with PL-259 fittings on both ends for quick installation of hardware.

Sea-Dog 3298021 5' Coaxial Cable Assembly - 329802-1 - 354-3298021F1

Nickel plated brass coaxial cable assemblies. RG-58U Coax cable is pre-assembled with PL-259 fittings on both ends for quick installation of hardware.

Sea-Dog 3281971 Nylon Flagpole Pennant Mounts & Stainless Clips, 4/Set - 328197-1 - 354-3281971F1

Nylon adjustable flag pole mount clip used in conjunction with stainless steel spring wire quick release clip can be positioned and repositioned on a flag pole allowing mounting flexibility for a variety of flag or pennant sizes. Stainless spring clips are designed to hold their shape after continued use.

Sea-Dog 3281951 Stainless Flag Pole Hole Mount Pennant Clips, 4/Set - 328195-1 - 354-3281951F1

Stainless spring wire quick release clips are designed to hold their shape after continued use.

Sea-Dog 3281901 Flag Clips For 1/2" Dia Pole, Pr. - 328190-1 - 354-3281901F1

Flag is attached to the flag pole using nylon adjustable flag pole clips in conjunction with stainless steel spring wire quick release clips

Sea-Dog 328160 Hawse Pipe - 328160-1 - 354-3281601F1

Designed to protect the boats hull against damage from anchor line and chain while also reducing rope chafe. Investment cast 316 stainless steel construction for corrosion resistance and durability. Installs with four fasteners (not included).

Sea-Dog 328050 Short Bow Roller - 328050 - 354-328050F1

Investment Cast 316 Stainless Steel body & wheel.

Sea-Dog 3272001 Fender Mate, 1 Pr. - 327200-1 - 354-3272001F1

Fendermate is the latest in fender brackets constructed of marine grade, reinforced injection molded nylon. Clamps securely on both 7/8" and 1" round tubing and 3/16" and 1/4" life line wire. Unique double locking action locks the clamp on the rail or wire while still allowing full adjustment of the height of the fender. When the proper height is reached, the final locking action clamps the rope quickly and securely.

Sea-Dog 3271911 Rail Mount Bracket - Round, For 1-1/8" - 1-1/4" Rail, Black - 327191-1 - 354-3271911F1

Injection Molded Nylon/Stainless Steel Screws.

Sea-Dog 3271901 Rail Mount Bracket - Round, For 7/8" - 1" Rail, Black, 2/Pk - 327190-1 - 354-3271901F1

Injection Molded Nylon/Stainless Steel Screws.

Sea-Dog 327135 Rail Mount Horseshoe Buoy Bracket - 327135-1 - 354-3271351F1

Can be used on 7/8" or 1" tubing or mounted directly to a flat surface. Comes complete with all necessary hardware to mount on tubing. Made from marine grade stamped aluminum and powder coated for a long lasting finish.

Sea-Dog 3271121 Rail Mount Fairlead With Stainless Insert - 327112-1 - 354-3271121F1

Includes a nylon fair lead with stainless insert. Allows easy routing of roller furling lines. The stainless insert allows use of wire lines if necessary. Fits 7/8" - 1" railing.

Sea-Dog 3271111 Rail Mount Cleat - 327111-1 - 354-3271111F1

Includes a Heavy Duty Black Nylon Cleat. Ideal for easy attachment of fender, flag halyards, canvas tie downs and related accessories.

Sea-Dog 327105 Rail Mount Brackets W/Screws, White, 1 Pr. - 327105-1 - 354-3271051F1

Designed for easy attachment to 7/8" - 1" tubing. The injection molded nylon mounting parts and rubber liners allow for positive attachment without scratching or marring the tubing.

Sea-Dog 327101 Rail Mount Brackets W/Oval Plates, Black, 1 Pr. - 327101-1 - 354-3271011F1

Designed for easy attachment to 7/8" - 1" tubing. The injection molded nylon mounting parts and rubber liners allow for positive attachment without scratching or marring the tubing.

Sea-Dog 3271001 Rail Mount Brackets W/Screws, Black, 1 Pr. - 327100-1 - 354-3271001F1

Designed for easy attachment to 7/8" - 1" tubing. The injection molded nylon mounting parts and rubber liners allow for positive attachment without scratching or marring the tubing.

Sea-Dog 3265803 Fillet Table, 20" W X 12-5/8" D, Table Only - 326580-3 - 354-3265803F1

Solid one-piece construction for long life and easy maintenanceUV stabilized high-density polypropylene constructionEasily accessible knife and pliers holders, large table features additional hose holder and towel barKnives and pliers not includedDoes Not Include Mounting Hardware

Sea-Dog 3265353 Fillet & Prep Table Square Rail Mount, A:30", B:12-5/8", C:13-1/2", D:2-3/8", Large, Fits Tubing: 1"-1-1/4" - 326535-3 - 354-3265353F1

Solid one-piece construction for long life and easy maintenanceUV stabilized high density polypropylene constructionMedium: 20" wide by 12-5/8" deep, Large: 30" wide by 12-5/8" deepFits square tubing 1" - 1-1/4" diameterAssembles in minutes, all assembly hardware includedEasily accessible knife and pliers holders, large table features additional hose holder and towel barKnives and pliers not included

Sea-Dog 3265303 Fillet & Prep Table Square Rail Mount, A:20", B:12-5/8", C 13-1/2", D:2", Medium, Fits Tubing: 1"-1-1/4" - 326530-3 - 354-3265303F1

Solid one-piece construction for long life and easy maintenanceUV stabilized high density polypropylene constructionMedium: 20" wide by 12-5/8" deep, Large: 30" wide by 12-5/8" deepFits square tubing 1" - 1-1/4" diameterAssembles in minutes, all assembly hardware includedEasily accessible knife and pliers holders, large table features additional hose holder and towel barKnives and pliers not included

Sea-Dog 3265253 Fillet & Prep Table Round Rail Mount, A: 20", B:12-5/8", C:13-1/2", D:2-3/8", Large, 3/4"-1-1/4" - 326525-3 - 354-3265253F1

Solid one-piece construction for long life and easy maintenanceUV stabilized high density polypropylene constructionMedium: 20" wide by 12-5/8" deep, Large: 30" wide by 12-5/8" deepFits round tubing 3/4"-1-1/4" diameterEasily accessible knife and pliers holders, large table features additional hose holder and towel barKnives and pliers not included

Sea-Dog 3265203 Fillet & Prep Table Round Rail Mount, A: 20", B:12-5/8", C:13-1/2", D:2", Medium, 3/4"-1-1/4" - 326520-3 - 354-3265203F1

Solid one-piece construction for long life and easy maintenanceUV stabilized high density polypropylene constructionMedium: 20" wide by 12-5/8" deep, Large: 30" wide by 12-5/8" deepFits round tubing 3/4"-1-1/4" diameterEasily accessible knife and pliers holders, large table features additional hose holder and towel barKnives and pliers not included

Sea-Dog 3256241 4-Rod Storage Rack - 325624-1 - 354-3256241F1

Constructed of extremely durable, high-strength UV resistant polypropylene. For horizontal and overhead installation. Rods are secured with bungee cord attachment. Installs with twelve #8 FH fasteners (included).

Sea-Dog 325168 Flush Mount Rod Holder W/Stainless Top - 325168-1 - 354-3251681F1

Constructed of UV resistant injection molded ABS with a stainless steel top cap. Features a 30° angle. Accommodates rods up to 1-5/8". Installs with three #12 FH fasteners (not included).

Sea-Dog 3250651 Narrow Gunnel Rod Holder W/Stainless Top - 325065-1 - 354-3250651F1

This Narrow Gunnel Flush Mount Rod Holder with Stainless Top is designed for narrow gunnel applications. Accommodates rods up to 1-5/8" in diameter. Features a 30° angle. Constructed of UV resistant injection molded ABS with highly polished investment cast 316 stainless top. Installs with three #10 FH fasteners (not included).

Sea-Dog 325041 Pvc Clips For Track Rod Holder - 325041 - 354-325041F1

Designed to hold fishing rods in the toughest conditions. Track sold separately

Sea-Dog 3222701 Ladder Locks, Chrome - 322270-1 - 354-3222701F1

Ladder Locks are commonly used with wooden step ladders. Ladder slips into tapered locks and becomes secure as it is lowered in to place. Installs with eight #10 FH fasteners (not included). Highly polished chrome.

Sea-Dog 321850 Chain Gripper Plate - 321850-1 - 354-3218501F1

Stabilizes anchor chain and reduces stress on windlass when anchored in heavy seas. The two holes are used for a bridle application with two Sea-Dog® Bow Shackles (147212) for connecting lines to port and starboard cleats for stabilization. Fits anchor chain sizes: 5/16", 3/8", 7/16" and 1/2".

Sea-Dog 3216601 Hatch Spring - 321660-1 - 354-3216601F1

Formed 304 Stainless Steel.

Sea-Dog 3216501 Hatch Spring - 321650-1 - 354-3216501F1

The Sea-Dog Stainless Steel Hatch Spring has an internal wire that prevents the spring from being overextended during normal use. Not recommended for applications where hatch will scoop wind while boat is underway and overextend.

Sea-Dog 3215861 Gas Lift Ball Stud-10Mm - 321586-1 - 354-3215861F1

Gas Lift Mounts and ball studs are constructed of 304 stainless steel. Used for mounting gas filled lift springs. Installs with #10 RH fasteners (not included). 10 mm ball.

Sea-Dog 321586 Gas Lift Ball Stud - 10Mm - 321586 - 354-321586F1

Gas Lift Mounts and ball studs are constructed of 304 stainless steel. Used for mounting gas filled lift springs. Installs with #10 RH fasteners (not included). 10 mm ball.

Sea-Dog 3215831 Flush Gas Lift - 321583-1 - 354-3215831F1

Gas Lift Mounts and ball studs are constructed of 304 stainless steel. Used for mounting gas filled lift springs. Installs with #10 RH fasteners (not included). 10 mm ball.

Sea-Dog 3215821 90° Gas Lift Mount-Mount-Wide - 321582-1 - 354-3215821F1

Gas Lift Mounts and ball studs are constructed of 304 stainless steel. Used for mounting gas filled lift springs. Installs with #10 RH fasteners (not included). 10 mm ball.

Sea-Dog 3215811 90° Gas Lift Mount-Narrow - 321581-1 - 354-3215811F1

Gas Lift Mounts and ball studs are constructed of 304 stainless steel. Used for mounting gas filled lift springs. Installs with #10 RH fasteners (not included). 10 mm ball.

Sea-Dog 318022 Folding Grapnel Anchor, 22 Lbs. A:1/2" , B:24-1/4", C:5", Boat Length: 22'-30', Line/Length: 3/8"150', Chain Length: 1/4"/10'-20' - 318022 - 354-318022F1

These grapnel Folding Anchors are designed with four arms that fold flat against the shank for compact storage. Constructed of hot dipped, galvanized iron with forged flukes. Lockable in opened or closed position. Ideal for inflatable boats as there are no open flukes to puncture the sensitive fabric. Great as a primary anchor on dinghies, PWC's, canoes, kayaks, and small sailboats they are also an inexpensive backup anchor on larger boats. Effective holding power in mud, sand, gravel, or rocky conditions. Recommended Line & Chain Sizes Shown (not included).

Sea-Dog 318013 Folding Grapnel Anchor 13 Lbs, A:1/2" , B:21:1/2, C:4-3/4", Boat Length:14'-22', Line/Length: 3/8"/150', Chain Length: 3/16"/10'-20' - 318013 - 354-318013F1

These grapnel Folding Anchors are designed with four arms that fold flat against the shank for compact storage. Constructed of hot dipped, galvanized iron with forged flukes. Lockable in opened or closed position. Ideal for inflatable boats as there are no open flukes to puncture the sensitive fabric. Great as a primary anchor on dinghies, PWC's, canoes, kayaks, and small sailboats they are also an inexpensive backup anchor on larger boats. Effective holding power in mud, sand, gravel, or rocky conditions. Recommended Line & Chain Sizes Shown (not included).

Sea-Dog 318003 Folding Grapnel Anchorr 3.5 Lbs, A:1/2" , B:12", C:2-7/8", Boat Length: 5'-12', Line/Length: 1/4"/35' , Chain/Length: 3/16"/7'-10" - 318003 - 354-318003F1

These grapnel Folding Anchors are designed with four arms that fold flat against the shank for compact storage. Constructed of hot dipped, galvanized iron with forged flukes. Lockable in opened or closed position. Ideal for inflatable boats as there are no open flukes to puncture the sensitive fabric. Great as a primary anchor on dinghies, PWC's, canoes, kayaks, and small sailboats they are also an inexpensive backup anchor on larger boats. Effective holding power in mud, sand, gravel, or rocky conditions.

Sea-Dog 318001 Folding Grapnel Anchor 1.5 Lbs., A:1/4" , B:7", C:2-1/4", Boat Length:5'-10', Line/Length: 1/4"/35' , Chain/Length: 3/16"/7'-10" - 318001 - 354-318001F1

These grapnel Folding Anchors are designed with four arms that fold flat against the shank for compact storage. Constructed of hot dipped, galvanized iron with forged flukes. Lockable in opened or closed position. Ideal for inflatable boats as there are no open flukes to puncture the sensitive fabric. Great as a primary anchor on dinghies, PWC's, canoes, kayaks, and small sailboats they are also an inexpensive backup anchor on larger boats. Effective holding power in mud, sand, gravel, or rocky conditions.

Sea-Dog 3-Sided Bristle Brush, Stiff, White - 491090-1 - 354-4910901F1

These Boat Hook Three Sided Bristle Brushes fit all Sea-Dog® Boat Hooks and universal/Acme threaded devices. Stiff bristles (white) are effective for jobs below the waterline, teak, and other tough cleaning jobs. Side bristles make it easy to clean in hard to reach places. 10-1/2" head is longer than industry standard, covering a larger cleaning area.

Sea-Dog 3-Sided Bristle Brush, Soft, Blue - 491070-1 - 354-4910701F1

These Boat Hook Three Sided Bristle Brushes fit all Sea-Dog® Boat Hooks and universal/Acme threaded devices. Soft bristles (blue) are scratch resistant for gelcoat, paint, and plastic windows. Side bristles make it easy to clean in hard to reach places. 10-1/2" head is longer than industry standard, covering a larger cleaning area.

Sea-Dog 3-Sided Bristle Brush, Medium, Yellow - 491080-1 - 354-4910801F1

These Boat Hook Three Sided Bristle Brushes fit all Sea-Dog® Boat Hooks and universal/Acme threaded devices. The medium bristles (yellow) are a good overall brush for textured and non-skid surfaces. Side bristles make it easy to clean in hard to reach places. 10-1/2" head is longer than industry standard, covering a larger cleaning area.

Sea-Dog 2991191 Snap Turn Buckle - #7 Brass Wood Screw, Nickel Plated Brass, 2 Sets - 299119-1 - 354-2991191F1

Nickel plated brass canvas fasteners. Excellent snap action and holding strength. Easy Installation.

Sea-Dog 2991181 Snap Turn Buckle Eyelet & Washer, Nickel Plated Brass, 2 Sets - 299118-1 - 354-2991181F1

Nickel plated brass canvas fasteners. Excellent snap action and holding strength. Easy Installation.

Sea-Dog 2991171 Snap Turn Buckle - 2 Prong Clinch & Back Plate, Nickel Plated Brass, 2 Sets - 299117-1 - 354-2991171F1

Nickel plated brass canvas fasteners. Excellent snap action and holding strength. Easy Installation.

Sea-Dog 2991161 Snap Turn Buckle - 2 Screw Base, Nickel Plated Brass, 2 Sets - 299116-1 - 354-2991161F1

Nickel plated brass canvas fasteners. Excellent snap action and holding strength. Easy Installation.

Sea-Dog 2991151 Canvas Snap Stud (#10-32 Mach. Screw), Nickel Plated Brass, 5 Sets - 299115-1 - 354-2991151F1

Nickel plated brass canvas fasteners. Excellent snap action and holding strength. Easy Installation.

Sea-Dog 2991141 Screw Snap Stud (#8 Screw), Nickel Plated Brass, 6 Sets - 299114-1 - 354-2991141F1

Nickel plated brass canvas fasteners. Excellent snap action and holding strength. Easy Installation.

Sea-Dog 2991131 Screw Snap Stud (#10 Screw), Nickel Plated Brass, 6 Sets - 299113-1 - 354-2991131F1

Nickel plated brass canvas fasteners. Excellent snap action and holding strength. Easy Installation.

Sea-Dog 2991121 Screw Snap Stud (#8 Screw), Nickel Plated Brass, 6 Sets - 299112-1 - 354-2991121F1

Nickel plated brass canvas fasteners. Excellent snap action and holding strength. Easy Installation.

Sea-Dog 2991111 Screw Snap Stud (#8 Screw), Nickel Plated Brass, 6 Sets - 299111-1 - 354-2991111F1

Nickel plated brass canvas fasteners. Excellent snap action and holding strength. Easy Installation.

Sea-Dog 2991101 Eyelet Snap Stud, Nickel Plated Brass, 6 Sets - 299110-1 - 354-2991101F1

Nickel plated brass canvas fasteners. Excellent snap action and holding strength. Easy Installation.

Sea-Dog 2991091 Snap Cap & Socket, Nickel Plated Brass, 6 Sets - 299109-1 - 354-2991091F1

Nickel plated brass canvas fasteners. Excellent snap action and holding strength. Easy Installation.

Sea-Dog 2991081 Snap Cap & Socket, Nickel Plated Brass, 6 Sets - 299108-1 - 354-2991081F1

Nickel plated brass canvas fasteners. Excellent snap action and holding strength. Easy Installation.

Sea-Dog 2891651 16-1/2 Rail End, Male, Stainless, 7/8" Tubing" - 289165-1 - 354-2891651F1

These hand rail fittings are constructed of investment cast 316 stainless steel for corrosion resistance and durability. Designed for use with 7/8" OD stainless tubing with a wall thickness of .049". Includes set screws where appropriate.

Sea-Dog 2891551 5-1/2 Rail End, Female, Stainless, 7/8" Tubing" - 289155-1 - 354-2891551F1

These hand rail fittings are constructed of investment cast 316 stainless steel for corrosion resistance and durability. Designed for use with 7/8" OD stainless tubing with a wall thickness of .049". Includes set screws where appropriate.

Sea-Dog 288291 Bullet End, Stainless, 1" Tubing - 288291 - 354-288291F1

These hand rail fittings are constructed of investment cast 316 stainless steel for corrosion resistance and durability. Designed for use with 1" OD stainless tubing with a wall thickness of .049". Includes set screws where appropriate.

Sea-Dog 2882901 Bullet End, Stainless, 7/8" Tubing - 288290-1 - 354-2882901F1

These hand rail fittings are constructed of investment cast 316 stainless steel for corrosion resistance and durability. Designed for use with 7/8" OD stainless tubing with a wall thickness of .049". Includes set screws where appropriate.

Sea-Dog 285166 60° End (Starboard) Stanchion, Stainless, 7/8" Tubing - 285166-1 - 354-2851661F1

These hand rail fittings are constructed of investment cast 316 stainless steel for corrosion resistance and durability. Designed for use with 7/8" OD stainless tubing with a wall thickness of .049". Includes set screws where appropriate.

Sea-Dog 285165 60° End (Port) Stanchion, Stainless, 7/8" Tubing - 285165-1 - 354-2851651F1

These hand rail fittings are constructed of investment cast 316 stainless steel for corrosion resistance and durability. Designed for use with 7/8" OD stainless tubing with a wall thickness of .049". Includes set screws where appropriate.

Sea-Dog 2851601 60° End Stanchion, Stainless, 7/8" Tubing - 285160-1 - 354-2851601F1

These hand rail fittings are constructed of investment cast 316 stainless steel for corrosion resistance and durability. Designed for use with 7/8" OD stainless tubing with a wall thickness of .049". Includes set screws where appropriate.

Sea-Dog 2850661 60° Center (Starboard) Stanchion, Stainless, 7/8" Tubing - 285066-1 - 354-2850661F1

These hand rail fittings are constructed of investment cast 316 stainless steel for corrosion resistance and durability. Designed for use with 7/8" OD stainless tubing with a wall thickness of .049". Includes set screws where appropriate.

Sea-Dog 2850651 60° Center (Port) Stanchion, Stainless, 7/8" Tubing - 285065-1 - 354-2850651F1

These hand rail fittings are constructed of investment cast 316 stainless steel for corrosion resistance and durability. Designed for use with 7/8" OD stainless tubing with a wall thickness of .049". Includes set screws where appropriate.

Sea-Dog 2850611 60° Center, Stainless, 1" Tubing - 285061-1 - 354-2850611F1

These hand rail fittings are constructed of investment cast 316 stainless steel for corrosion resistance and durability. Designed for use with 1" OD stainless tubing with a wall thickness of .049". Includes set screws where appropriate.

Sea-Dog 2850601 60° Center Stanchion, Stainless, 7/8" Tubing - 285060-1 - 354-2850601F1

These hand rail fittings are constructed of investment cast 316 stainless steel for corrosion resistance and durability. Designed for use with 7/8" OD stainless tubing with a wall thickness of .049". Includes set screws where appropriate.

Sea-Dog 2819011 90° Rectangular Base, 1" Ss - 281901-1 - 354-2819011F1

These Rectangular Rail Base Fittings are constructed of investment cast 316 stainless steel for corrosion resistance and durability. Designed for use with 1" OD stainless tubing with a wall thickness of 0.049". Includes set screws where appropriate. Installs with four 1/4 FH fasteners (not included).

Sea-Dog 2819001 90° Rectangular Base, 7/8" Ss - 281900-1 - 354-2819001F1

These Rectangular Rail Base Fittings are constructed of investment cast 316 stainless steel for corrosion resistance and durability. Designed for use with 7/8" OD stainless tubing with a wall thickness of 0.049". Includes set screws where appropriate. Installs with four #10 FH fasteners (not included).

Sea-Dog 2816011 60° Rectangular Base, 1" Ss - 281601-1 - 354-2816011F1

These Rectangular Rail Base Fittings are constructed of investment cast 316 stainless steel for corrosion resistance and durability. Designed for use with 1" OD stainless tubing with a wall thickness of 0.049". Includes set screws where appropriate. Installs with four 1/4 FH fasteners (not included).

Sea-Dog 2816001 60° Rectangular Base, 7/8" Ss - 281600-1 - 354-2816001F1

These Rectangular Rail Base Fittings are constructed of investment cast 316 stainless steel for corrosion resistance and durability. Designed for use with 7/8" OD stainless tubing with a wall thickness of 0.049". Includes set screws where appropriate. Installs with four #10 FH fasteners (not included).

Sea-Dog 2814511 45° Rectangular Base, 1" Ss - 281451-1 - 354-2814511F1

These Rectangular Rail Base Fittings are constructed of investment cast 316 stainless steel for corrosion resistance and durability. Designed for use with 1" OD stainless tubing with a wall thickness of 0.049". Includes set screws where appropriate. Installs with four 1/4 FH fasteners (not included).

Sea-Dog 2814501 45° Rectangular Base, 7/8" Ss - 281450-1 - 354-2814501F1

These Rectangular Rail Base Fittings are constructed of investment cast 316 stainless steel for corrosion resistance and durability. Designed for use with 7/8" OD stainless tubing with a wall thickness of 0.049". Includes set screws where appropriate. Installs with four #10 FH fasteners (not included).

Sea-Dog 2813011 30° Rectangular Base, 1" Ss - 281301-1 - 354-2813011F1

These Rectangular Rail Base Fittings are constructed of investment cast 316 stainless steel for corrosion resistance and durability. Designed for use with 1" OD stainless tubing with a wall thickness of 0.049". Includes set screws where appropriate. Installs with four 1/4 FH fasteners (not included).

Sea-Dog 2813001 30° Rectangular Base, 7/8" Ss - 281300-1 - 354-2813001F1

These Rectangular Rail Base Fittings are constructed of investment cast 316 stainless steel for corrosion resistance and durability. Designed for use with 7/8" OD stainless tubing with a wall thickness of 0.049". Includes set screws where appropriate. Installs with four #10 FH fasteners (not included).

Sea-Dog 2809211 90° (Low) Round Base 1" Ss - 280921-1 - 354-2809211F1

Constructed of investment cast 316 stainless steel for corrosion resistance and durability. Includes set screws where appropriate. Installs with fasteners, not included.

Sea-Dog 2761601 Jaw Slide, 7/8" Chrome Zinc, Pair - 276160-1 - 354-2761601F1

Constructed of chrome plated die cast zinc these Bimini top fittings are recommended for freshwater use.

Sea-Dog 2761001 External Eye End, 7/8" Chrome Zinc, Pair - 276100-1 - 354-2761001F1

Constructed of chrome plated die cast zinc these Bimini top fittings are recommended for freshwater use. Pin size 1/4".

Sea-Dog 2736701 Canvas Stud Clip, Nylon Windshield Canvas Stud Clip - 273670-1 - 354-2736701F1

Sea-Dog 2731661 Jaw Slide, 3/4" White, Pair - 273166-1 - 354-2731661F1

Used as part of a Bimini top system, jaw slides attach an eye end securely to support tubing. For installing a new Bimini top to boat rails or for adding additional support arms to an existing top. These injection molded nylon fittings are durable, UV and corrosion resistant. Set screw on back allows you to quickly and easily adjust the placement of these slides.

Sea-Dog 2731651 Jaw Slide, 3/4" Black, Pair - 273165-1 - 354-2731651F1

Used as part of a Bimini top system, jaw slides attach an eye end securely to support tubing. For installing a new Bimini top to boat rails or for adding additional support arms to an existing top. These injection molded nylon fittings are durable, UV and corrosion resistant. Set screw on back allows you to quickly and easily adjust the placement of these slides.

Sea-Dog 2731631 Jaw Slide, 7/8" White Hinged - 273163-1 - 354-2731631F1

Used as part of a Bimini top system, jaw slides attach an eye end securely to support tubing. For installing a new Bimini top to boat rails or for adding additional support arms to an existing top. These injection molded nylon fittings are durable, UV and corrosion resistant. Set screw on back allows you to quickly and easily adjust the placement of these slides. Hinged jaw slides fit 7/8" tubing and are ideal for mounting on handrails, or in applications where it is not possible, or convenient, to slide the fitting on.

Sea-Dog 2731611 Jaw Slide, 7/8" White, Pair - 273161-1 - 354-2731611F1

Used as part of a Bimini top system, jaw slides attach an eye end securely to support tubing. For installing a new Bimini top to boat rails or for adding additional support arms to an existing top. These injection molded nylon fittings are durable, UV and corrosion resistant. Set screw on back allows you to quickly and easily adjust the placement of these slides.

Sea-Dog 2731601 Jaw Slide, 7/8" Black, Pair - 273160-1 - 354-2731601F1

Used as part of a Bimini top system, jaw slides attach an eye end securely to support tubing. For installing a new Bimini top to boat rails or for adding additional support arms to an existing top. These injection molded nylon fittings are durable, UV and corrosion resistant. Set screw on back allows you to quickly and easily adjust the placement of these slides.

Sea-Dog 2731111 External Eye End, 3/4" White, Pair - 273111-1 - 354-2731111F1

UV stabilized injection molded nylon top fittings connect to tubing and creates an attachment point as part of a Bimini top system. Top fittings function as a pivot point for your canvas top. 1/4" Pin size.

Sea-Dog 2731101 External Eye End, 3/4" Black, Pair - 273110-1 - 354-2731101F1

UV stabilized injection molded nylon top fittings connect to tubing and creates an attachment point as part of a Bimini top system. Top fittings function as a pivot point for your canvas top. 1/4" Pin size.

Sea-Dog 2731011 External Eye End, 7/8" White, Pair - 273101-1 - 354-2731011F1

UV stabilized injection molded nylon top fittings connect to tubing and creates an attachment point as part of a Bimini top system. Top fittings function as a pivot point for your canvas top. 1/4" Pin size.