Docking & Fendering
Taylor Post Bumper 7" Diameter X 17" Long - 45604 - 32-45604F1
Great protection for pipe supported type docks. Molded from marine grade vinyl with an inflation valve to adjust firmness. Slides over 1-1/2" dock pipe.
Taylor Post Bumper 7" Diameter X 17" Long - 45607 - 32-45607F1
Great protection for pipe supported type docks. Molded from marine grade vinyl with an inflation valve to adjust firmness. Slides over 1-1/2" dock pipe.
Taylor Post Bumper 7" Diameter X 17" Long - 45652 - 32-45652F1
Great protection for pipe supported type docks. Molded from marine grade vinyl with an inflation valve to adjust firmness. Slides over 1-1/2" dock pipe.
Taylor Post Bumper 7" Diameter X 17" Long - 45653 - 32-45653F1
Great protection for pipe supported type docks. Molded from marine grade vinyl with an inflation valve to adjust firmness. Slides over 1-1/2" dock pipe.
Taylor Post Bumper 7" Diameter X 17" Long - 45657 - 32-45657F1
Great protection for pipe supported type docks. Molded from marine grade vinyl with an inflation valve to adjust firmness. Slides over 1-1/2" dock pipe.
Taylor Post Bumper 7" Diameter X 17" Long - 45660 - 32-45660F1
Great protection for pipe supported type docks. Molded from marine grade vinyl with an inflation valve to adjust firmness. Slides over 1-1/2" dock pipe.
Taylor Premium Mooring Whips With Rocker Arm Base (Sold In Pairs) For Boats Up To 33' - Pmw.1400 - 32-Pmw1400F1
Mooring whips are a safe way to protect your boat against costly dockside and seawall damage. The Mooring Whip system pulls your boat a safe, convenient distance away from the dock thereby protecting it from the damaging forces of waves, wind, tides and wakes. Mooring Whips are made of high quality, solid fiberglass poles, aluminum- magnesium base units, tips, and mooring whip lines. Each set comes complete with all of the hardware necessary for installation.Premium mooring whips are equipped with unique rocker arm bases that return the whip poles to the vertical position when not in use and 1" diameter fiberglass poles. These are ideal for sailboats and larger, heavier or high profile boats in salt water areas and large tidal areas. Sold in pairs.
Taylor Premium Mooring Whips With Rocker Arm Base (Sold In Pairs) For Boats Up To 34'-46' - Pmw.1600 - 32-Pmw1600F1
Mooring whips are a safe way to protect your boat against costly dockside and seawall damage. The Mooring Whip system pulls your boat a safe, convenient distance away from the dock thereby protecting it from the damaging forces of waves, wind, tides and wakes. Mooring Whips are made of high quality, solid fiberglass poles, aluminum- magnesium base units, tips, and mooring whip lines. Each set comes complete with all of the hardware necessary for installation.Premium mooring whips are equipped with unique rocker arm bases that return the whip poles to the vertical position when not in use and 1" diameter fiberglass poles. These are ideal for sailboats and larger, heavier or high profile boats in salt water areas and large tidal areas. Sold in pairs.
Taylor Pwc Fender, Black - 1062 - 32-1062F1
Designed to custom fit the profile of most PWCs. The fender bottom is shaped to "hook" under the bond flange for quick attachment. Flex areas on the fender provide a "hinge" action that allows the fender to conform to the shape of the watercraft. Features an inflation valve for air pressure adjustment and includes a suction cup and securing line.
Taylor Pwc Fender, Blue - 1075 - 32-1075F1
Designed to custom fit the profile of most PWCs. The fender bottom is shaped to "hook" under the bond flange for quick attachment. Flex areas on the fender provide a "hinge" action that allows the fender to conform to the shape of the watercraft. Features an inflation valve for air pressure adjustment and includes a suction cup and securing line.
Taylor Pwc Fender, Red - 1066 - 32-1066F1
Designed to custom fit the profile of most PWCs. The fender bottom is shaped to "hook" under the bond flange for quick attachment. Flex areas on the fender provide a "hinge" action that allows the fender to conform to the shape of the watercraft. Features an inflation valve for air pressure adjustment and includes a suction cup and securing line.
Taylor Pwc Fender, White - 1069 - 32-1069F1
Designed to custom fit the profile of most PWCs. The fender bottom is shaped to "hook" under the bond flange for quick attachment. Flex areas on the fender provide a "hinge" action that allows the fender to conform to the shape of the watercraft. Features an inflation valve for air pressure adjustment and includes a suction cup and securing line.
Taylor Quick Knot Fender Hanger (4 Per Pack) - 1098 - 32-1098F1
This easy to use fender hanger allows the quick placement of fenders anywhere there is something to tie off to, without having to tie a knot. The rope is threaded through the quick knot's heavy duty molded nylon system, hanging the fender quickly and securely. No need to waste time with cumbersome and unsecured knots! Perfect for 1/4" rope.
Taylor Rail Fender Hanger For Rails Up To 1" - 1108 - 32-1108F1
This unique design makes to easy to adjust fender heights and locks in place with a jam cleat-no knots. Uses 1/4" to 1/2" line and fits up to 1" rail.
Taylor Rail Mount Fender Line Clips For 7/8" Rail (2 Per Pack) - 1093 - 32-1093F1
Injection molded polyethylene clips mount securely to your 7/8" railings. Used for hanging fenders, holding power cords, etc.
Taylor Rail/Lifeline Fender Bracket For 1/4" To 5/16" Rope (2 Per Pack) - 1097 - 32-1097F1
Double locking clamp design provides for a quick and easy fender height adjustment. Injection molded nylon clamp brackets mount securely to 7/8"-1" railings or up to 1/4" lifelines. Use on 1/4"-5/16" rope.
Taylor Ratcheting Fender Hanger - 1089 - 32-1089F1
Constructed from 3/4" polyester webbing with UV protection. This unique hanger allows you to adjust your fender height from 6" to 24". Simply loop the strap over any size rail or lifeline, feed the end of the strap through fender eye or tube and pull strap through buckle to desired length. Slide tab into release buckle until you reach the tightness around your rail or lifeline that you desire.
Taylor Rubber Mooring Snubber (Mooring Line Shock Compensator) - 307 - 32-307F1
Mooring snubbers prevent mooring line breakage along with compensating for sudden jolting and excess stretching of lines beyond parting strength. Made from super elastic isoprene natural rubber snubbers also provide maximum protection against the stress caused by wind, waves, and wakes. No tools needed to install. Locks lines safely and securely. Self-locking internal system eliminates chafing.
Taylor Rubber Mooring Snubber (Mooring Line Shock Compensator) - 308 - 32-308F1
Mooring snubbers prevent mooring line breakage along with compensating for sudden jolting and excess stretching of lines beyond parting strength. Made from super elastic isoprene natural rubber snubbers also provide maximum protection against the stress caused by wind, waves, and wakes. No tools needed to install. Locks lines safely and securely. Self-locking internal system eliminates chafing.
Taylor Rubber Mooring Snubber (Mooring Line Shock Compensator) - 309 - 32-309F1
Mooring snubbers prevent mooring line breakage along with compensating for sudden jolting and excess stretching of lines beyond parting strength. Made from super elastic isoprene natural rubber snubbers also provide maximum protection against the stress caused by wind, waves, and wakes. No tools needed to install. Locks lines safely and securely. Self-locking internal system eliminates chafing.
Taylor Sd1829B Super Duty Inflatable Yacht Fender, 18" X 29", Black - Sd1829B - 32-Sd1829Bf1
Welded seams - no glue to harden or breakdown. Heavy duty spring actuated valve with quarter turn lock for easy inflation and deflation. Over 50% more abrasion resistant and twice the tear resistance than the best-selling competitors brand. 30% heavier material and 15% higher tensile strength than the competitions brand. 2" Tubular nylon webbing is used on the end caps, making the straps extremely strong.
Taylor Sd1829G Super Duty Inflatable Yacht Fender, 18" X 29", Gray - Sd1829G - 32-Sd1829Gf1
Welded seams - no glue to harden or breakdown. Heavy duty spring actuated valve with quarter turn lock for easy inflation and deflation. Over 50% more abrasion resistant and twice the tear resistance than the best-selling competitors brand. 30% heavier material and 15% higher tensile strength than the competitions brand. 2" Tubular nylon webbing is used on the end caps, making the straps extremely strong.
Taylor Sd1829N Super Duty Inflatable Yacht Fender, 18" X 29", Navy - Sd1829N - 32-Sd1829Nf1
Welded seams - no glue to harden or breakdown. Heavy duty spring actuated valve with quarter turn lock for easy inflation and deflation. Over 50% more abrasion resistant and twice the tear resistance than the best-selling competitors brand. 30% heavier material and 15% higher tensile strength than the competitions brand. 2" Tubular nylon webbing is used on the end caps, making the straps extremely strong.
Taylor Sd1842B Super Duty Inflatable Yacht Fender, 18" X 42", Black - Sd1842B - 32-Sd1842Bf1
Welded seams - no glue to harden or breakdown. Heavy duty spring actuated valve with quarter turn lock for easy inflation and deflation. Over 50% more abrasion resistant and twice the tear resistance than the best-selling competitors brand. 30% heavier material and 15% higher tensile strength than the competitions brand. 2" Tubular nylon webbing is used on the end caps, making the straps extremely strong.
Taylor Sd1842N Super Duty Inflatable Yacht Fender, 18" X 42", Navy - Sd1842N - 32-Sd1842Nf1
Welded seams - no glue to harden or breakdown. Heavy duty spring actuated valve with quarter turn lock for easy inflation and deflation. Over 50% more abrasion resistant and twice the tear resistance than the best-selling competitors brand. 30% heavier material and 15% higher tensile strength than the competitions brand. 2" Tubular nylon webbing is used on the end caps, making the straps extremely strong.
Taylor Sd2442B Super Duty Inflatable Yacht Fender, 24" X 42", Black - Sd2442B - 32-Sd2442Bf1
Welded seams - no glue to harden or breakdown. Heavy duty spring actuated valve with quarter turn lock for easy inflation and deflation. Over 50% more abrasion resistant and twice the tear resistance than the best-selling competitors brand. 30% heavier material and 15% higher tensile strength than the competitions brand. 2" Tubular nylon webbing is used on the end caps, making the straps extremely strong.
Taylor Sd2458B Super Duty Inflatable Yacht Fender, 24" X 58", Black - Sd2458B - 32-Sd2458Bf1
Welded seams - no glue to harden or breakdown. Heavy duty spring actuated valve with quarter turn lock for easy inflation and deflation. Over 50% more abrasion resistant and twice the tear resistance than the best-selling competitors brand. 30% heavier material and 15% higher tensile strength than the competitions brand. 2" Tubular nylon webbing is used on the end caps, making the straps extremely strong.
Taylor Standard Mooring Whips With Fixed 60° Angle Base (Sold In Pairs) For Boats Up To 18'-23' - Mw.120 - 32-Mw120F1
Mooring whips are a safe way to protect your boat against costly dockside and seawall damage. The Mooring Whip system pulls your boat a safe, convenient distance away from the dock thereby protecting it from the damaging forces of waves, wind, tides and wakes. Mooring Whips are made of high quality, solid fiberglass poles, aluminum- magnesium base units, tips, and mooring whip lines. Each set comes complete with all of the hardware necessary for installation.Standard mooring whips are equipped with fixed angle bases with a 60° angle, 13?16" diameter fiberglass poles and are most commonly used for ski boats, runabouts, center consoles, and bass boats in moderate wake areas. Sold in pairs.
Taylor Standard Mooring Whips With Fixed 60° Angle Base (Sold In Pairs) For Boats Up To 20' - Mw.080 - 32-Mw080F1
Mooring whips are a safe way to protect your boat against costly dockside and seawall damage. The Mooring Whip system pulls your boat a safe, convenient distance away from the dock thereby protecting it from the damaging forces of waves, wind, tides and wakes. Mooring Whips are made of high quality, solid fiberglass poles, aluminum- magnesium base units, tips, and mooring whip lines. Each set comes complete with all of the hardware necessary for installation.Standard mooring whips are equipped with fixed angle bases with a 60° angle, 13?16" diameter fiberglass poles and are most commonly used for ski boats, runabouts, center consoles, and bass boats in moderate wake areas. Sold in pairs.
Taylor Standard Mooring Whips With Fixed 60° Angle Base (Sold In Pairs) For Boats Up To 24'-28' - Mw.140 - 32-Mw140F1
Mooring whips are a safe way to protect your boat against costly dockside and seawall damage. The Mooring Whip system pulls your boat a safe, convenient distance away from the dock thereby protecting it from the damaging forces of waves, wind, tides and wakes. Mooring Whips are made of high quality, solid fiberglass poles, aluminum- magnesium base units, tips, and mooring whip lines. Each set comes complete with all of the hardware necessary for installation.Standard mooring whips are equipped with fixed angle bases with a 60° angle, 13?16" diameter fiberglass poles and are most commonly used for ski boats, runabouts, center consoles, and bass boats in moderate wake areas. Sold in pairs.
Taylor Standard Mooring Whips With Fixed 60° Angle Base (Sold In Pairs) For Boats Up To 29'-33' - Mw.160 - 32-Mw160F1
Mooring whips are a safe way to protect your boat against costly dockside and seawall damage. The Mooring Whip system pulls your boat a safe, convenient distance away from the dock thereby protecting it from the damaging forces of waves, wind, tides and wakes. Mooring Whips are made of high quality, solid fiberglass poles, aluminum- magnesium base units, tips, and mooring whip lines. Each set comes complete with all of the hardware necessary for installation.Standard mooring whips are equipped with fixed angle bases with a 60° angle, 13?16" diameter fiberglass poles and are most commonly used for ski boats, runabouts, center consoles, and bass boats in moderate wake areas. Sold in pairs.
Taylor Stepsafe Single Tread Dock Step 22" L X 18" W X 11.5" H - White With Black Non-Slip Pad - 47100 - 32-47100F1
Molded in durable UV resistant polyethylene with non-slip pad on top of each step. 1-1/2" wide flange provides adequate mounting surface for docks. Hand rails are available for two and three step models, sold separately.
Taylor Sur-Moor T3C Mooring Buoy - White With Blue Reflective Striping - 46370 - 32-46370F1
Hard skin mooring buoys have a seamless and tough, one-piece polyethylene shell. Hard skin shells feature ultraviolet light absorbers for long-term life under the sun. Filled with EPS foam to positively displace water. Tube-through-the-center design. Three-Year Flotation warranty. Textured finish to enhance paint adhesion. Hardware not included. Mooring chain should be 1/2" smaller in width than the tube I.D.Chain length is normally 1.5 x water depthThe chain weight should not be greater than 1/2 the buoyancy rating of the buoy
Taylor Sur-Moor T3C Mooring Buoy - White With Blue Reflective Striping - 46371 - 32-46371F1
Hard skin mooring buoys have a seamless and tough, one-piece polyethylene shell. Hard skin shells feature ultraviolet light absorbers for long-term life under the sun. Filled with EPS foam to positively displace water. Tube-through-the-center design. Three-Year Flotation warranty. Textured finish to enhance paint adhesion. Hardware not included. Mooring chain should be 1/2" smaller in width than the tube I.D.Chain length is normally 1.5 x water depthThe chain weight should not be greater than 1/2 the buoyancy rating of the buoy
Taylor Sur-Moor T3C Mooring Buoy - White With Blue Reflective Striping - 46372 - 32-46372F1
Hard skin mooring buoys have a seamless and tough, one-piece polyethylene shell. Hard skin shells feature ultraviolet light absorbers for long-term life under the sun. Filled with EPS foam to positively displace water. Tube-through-the-center design. Three-Year Flotation warranty. Textured finish to enhance paint adhesion. Hardware not included. Mooring chain should be 1/2" smaller in width than the tube I.D.Chain length is normally 1.5 x water depthThe chain weight should not be greater than 1/2 the buoyancy rating of the buoy
Taylor Sur-Moor T3C Mooring Buoy - White With Blue Reflective Striping - 46374 - 32-46374F1
Hard skin mooring buoys have a seamless and tough, one-piece polyethylene shell. Hard skin shells feature ultraviolet light absorbers for long-term life under the sun. Filled with EPS foam to positively displace water. Tube-through-the-center design. Three-Year Flotation warranty. Textured finish to enhance paint adhesion. Hardware not included. Mooring chain should be 1/2" smaller in width than the tube I.D.Chain length is normally 1.5 x water depthThe chain weight should not be greater than 1/2 the buoyancy rating of the buoy
Taylor Sur-Moor T3C Mooring Buoy - White With Blue Reflective Striping - 46375 - 32-46375F1
Hard skin mooring buoys have a seamless and tough, one-piece polyethylene shell. Hard skin shells feature ultraviolet light absorbers for long-term life under the sun. Filled with EPS foam to positively displace water. Tube-through-the-center design. Three-Year Flotation warranty. Textured finish to enhance paint adhesion. Hardware not included. Mooring chain should be 1/2" smaller in width than the tube I.D.Chain length is normally 1.5 x water depthThe chain weight should not be greater than 1/2 the buoyancy rating of the buoy
Taylor T3C Mooring Collar - 33020 - 32-33020F1
Protects your buoy from anchor chain wear, prolonging the life of the buoy. Designed to work in combination with standard shackles. Sized to slip into the top of 2 tube. Hot-dip galvanized steel.
Taylor T3C Mooring Collar - 33025 - 32-33025F1
Protects your buoy from anchor chain wear, prolonging the life of the buoy. Designed to work in combination with standard shackles. Sized to slip into the top of 2 tube. Hot-dip galvanized steel.
Taylor T3C Mooring Collar - 33028 - 32-33028F1
Protects your buoy from anchor chain wear, prolonging the life of the buoy. Designed to work in combination with standard shackles. Sized to slip into the top of 2 tube. Hot-dip galvanized steel.
Taylor Tidy-Ups Fender Adjuster Kit - 1131 - 32-1131F1
Tidy-Ups™ Kits include (1) Tidy-Ups™ Fender Adjuster and (6) feet of 3/8" solid braid polypropylene rope. Made from high quality marine grade components, they are quick and easy to use. Simply snap adjuster over your lifeline, railing, or stanchion and set fender height in an instant. It will not fade or kink, and is mildew and rot resistant. A pre-spliced and professionally finished end allows your fender to be tightly secured without hard-to-untie knots.
Taylor Tidy-Ups Fender Adjuster Kit - 1133 - 32-1133F1
Tidy-Ups™ Kits include (1) Tidy-Ups™ Fender Adjuster and (6) feet of 3/8" solid braid polypropylene rope. Made from high quality marine grade components, they are quick and easy to use. Simply snap adjuster over your lifeline, railing, or stanchion and set fender height in an instant. It will not fade or kink, and is mildew and rot resistant. A pre-spliced and professionally finished end allows your fender to be tightly secured without hard-to-untie knots.
Taylor Tidy-Ups Vinyl Fender Adjuster - 1015 - 32-1015F1
Vinyl fender adjusters simply snap over lifelines or railings and are ready to use.
Taylor Tidy-Ups Vinyl Fender Adjuster - 1016 - 32-1016F1
Vinyl fender adjusters simply snap over lifelines or railings and are ready to use.
Taylor Tidy-Ups Vinyl Fender Adjuster - 1018 - 32-1018F1
Vinyl fender adjusters simply snap over lifelines or railings and are ready to use.
Taylor Traditional Sur-Moor Mooring Buoy - White With Blue Reflective Striping - 22170 - 32-22170F1
Puncture proof and almost indestructible buoys features hot-dipped galvanized steel mounting hardware. Blue reflective stripe for nighttime visibility. Sandblasted finish. 3-Year flotation warranty on all Taylor hard skin buoys.
Taylor Traditional Sur-Moor Mooring Buoy - White With Blue Reflective Striping - 22171 - 32-22171F1
Puncture proof and almost indestructible buoys features hot-dipped galvanized steel mounting hardware. Blue reflective stripe for nighttime visibility. Sandblasted finish. 3-Year flotation warranty on all Taylor hard skin buoys.
Taylor Traditional Sur-Moor Mooring Buoy - White With Blue Reflective Striping - 22172 - 32-22172F1
Puncture proof and almost indestructible buoys features hot-dipped galvanized steel mounting hardware. Blue reflective stripe for nighttime visibility. Sandblasted finish. 3-Year flotation warranty on all Taylor hard skin buoys.
Taylor Traditional Sur-Moor Mooring Buoy - White With Blue Reflective Striping - 22174 - 32-22174F1
Puncture proof and almost indestructible buoys features hot-dipped galvanized steel mounting hardware. Blue reflective stripe for nighttime visibility. Sandblasted finish. 3-Year flotation warranty on all Taylor hard skin buoys.
Taylor Transom Fender 10" X 22" White - 56090 - 32-56090F1
Shaped to fit the stern of a sailboat or the edge of most swim platforms up to 4" thick. An integral 3/4" diameter tube allows a securing line to pass from end to end while a countered shape helps grip the fendering location. Inflation valve to adjust the level of firmness to satisfy all applications.
Taylor Vinyl Covered Pwc Fender - 346 - 32-346F1
All vinyl covered fenders contain high-density closed cell polyethylene foam, covered in a tough UV resistant and tear proof vinyl/polyester tri-laminate blend covering. Corrosion-proof grommets make attachment easy for any application. Hinges in center for better protection againts docks designed for bigger boatsHooks under rub rail with a molded hook integrated on back of fenderThe Blocks anchors fender strap perfectly
Tayor Perimeter Removable Post Bumper - White - Rpb3.30 - 32-Rpb330F1
Protects your boat at unfamiliar or unprotected docks. Polyester 53 length webbing and a heavy-duty delrin buckle system makes installation quick, easy and secure. Great for temporary docking or portable docks.
Tayor Perimeter Removable Post Bumper - White - Rpb4.30 - 32-Rpb430F1
Protects your boat at unfamiliar or unprotected docks. Polyester 53 length webbing and a heavy-duty delrin buckle system makes installation quick, easy and secure. Great for temporary docking or portable docks.
Tayor Perimeter Removable Post Bumper - White - Rpb4.45 - 32-Rpb445F1
Protects your boat at unfamiliar or unprotected docks. Polyester 53 length webbing and a heavy-duty delrin buckle system makes installation quick, easy and secure. Great for temporary docking or portable docks.
Tie Down Engineering 17026 Plastic Fender, Small White - 17026 - 241-17026F1
An attractive upgrade to any trailer, these high impact polyethylene fenders are UV protected. Designed for normal and low profile tires. Each fender requires 2 mounting brackets.
Tie Down Engineering 17033 Plastic Fender, Small Black - 17033 - 241-17033F1
An attractive upgrade to any trailer, these high impact polyethylene fenders are UV protected. Designed for normal and low profile tires. Each fender requires 2 mounting brackets.
Tie Down Engineering 44135 Galvanized Fender Bracket - 44135 - 241-44135F1
Step Bracket for 14"-15" Metal Fender.
Tie Down Engineering 44141 Galvanized Fender Bracket - 44141 - 241-44141F1
An attractive upgrade to any trailer, these high impact polyethylene fenders are UV protected. Designed for normal and low profile tires. Each fender requires 2 mounting brackets. Small 21"L x 7 3/4"W x 5"H. Large 45"L x 11 3/8"W x 11"H.
Tie Down Engineering 44331 Plastic Fender, Large Black - 44331 - 241-44331F1
An attractive upgrade to any trailer, these high impact polyethylene fenders are UV protected. Designed for normal and low profile tires. Each fender requires 2 mounting brackets.
Tie Down Engineering 44332 Plastic Fender, Large White - 44332 - 241-44332F1
An attractive upgrade to any trailer, these high impact polyethylene fenders are UV protected. Designed for normal and low profile tires. Each fender requires 2 mounting brackets.
Tie Down Engineering 44836 Tread Brite Aluminum Fender - 44836 - 241-44836F1
Heavy duty stamped fenders made from 12 gauge/.08" aluminum. Fenders can be drilled to fit a variety of mounting options.
Tie Down Engineering 44837 Tread Brite Aluminum Fender - 44837 - 241-44837F1
Heavy duty stamped fenders made from 12 gauge/.08" aluminum. Fenders can be drilled to fit a variety of mounting options.
Tie Down Engineering 81231 Galvanized Fender Brackets, 1 Pr. - 81231 - 241-81231F1
An attractive upgrade to any trailer, these high impact polyethylene fenders are UV protected. Designed for normal and low profile tires. Each fender requires 2 mounting brackets. Small 21"L x 7 3/4"W x 5"H. Large 45"L x 11 3/8"W x 11"H.
Tie Down Engineering 86260 Galvanized Fender Brackets, 2/Pk - 86260 - 241-86260F1
Offset Brackets for 8" & 12" Metal Fenders.
Tie Down Engineering 86262 Galvanized Fender Brackets, 2/Pk - 86262 - 241-86262F1
Flush Brackets for 8" & 12" Metal Fenders.
Tie Down Engineering 86264 Galvanized Metal Fender - 86264 - 241-86264F1
Heavy duty stamped 16 gauge galvanized steel. Fenders can be drilled to fit a variety of mounting options. Mounting brackets sold separately.
Tie Down Engineering 86265 Galvanized Metal Fender - 86265 - 241-86265F1
Heavy duty stamped 16 gauge galvanized steel. Fenders can be drilled to fit a variety of mounting options. Mounting brackets sold separately.
Tie Down Engineering 86266 Galvanized Metal Fender - 86266 - 241-86266F1
Heavy duty stamped 16 gauge galvanized steel. Fenders can be drilled to fit a variety of mounting options. Mounting brackets sold separately.
Tie Down Engineering 86267 Galvanized Metal Fender - 86267 - 241-86267F1
Heavy duty stamped 16 gauge galvanized steel. Fenders can be drilled to fit a variety of mounting options. Mounting brackets sold separately.
Tie Down Engineering 86269 Aluminum Adjustable Teardrop Fender - 86269 - 241-86269F1
Heavy duty fenders made from .083" gauge diamond plate aluminum. Tandem tear drop trailer fender can be adjusted from 60" to 72". Mounting hardware not included.
Tie Down Engineering 86582 Jeep Single Fender, Smooth Aluminum - 86582 - 241-86582F1
Heavy duty stamped fenders can be drilled to fit a variety of mounting options. Mounting hardware not included.
Tie Down Engineering 86583 Jeep Single Fender, Aluminum Tread - 86583 - 241-86583F1
Heavy duty stamped fenders can be drilled to fit a variety of mounting options. Mounting hardware not included.
Tie Down Engineering 86584 Round Single Fender, Smooth Aluminum - 86584 - 241-86584F1
Heavy duty stamped fenders can be drilled to fit a variety of mounting options. Mounting hardware not included.
Tie Down Engineering 86585 Round Single Fender, Aluminum Tread - 86585 - 241-86585F1
Heavy duty stamped fenders can be drilled to fit a variety of mounting options. Mounting hardware not included.
Tie Down Engineering 86586 Teardrop Fender, Smooth Aluminum - 86586 - 241-86586F1
Heavy duty stamped fenders can be drilled to fit a variety of mounting options. Mounting hardware not included.
Tie Down Engineering 86587 Teardrop Fender, Aluminum Tread - 86587 - 241-86587F1
Heavy duty stamped fenders can be drilled to fit a variety of mounting options. Mounting hardware not included.
Tie Down Engineering 86588 Flare Teardrop Fender, Smooth Aluminum - 86588 - 241-86588F1
Heavy duty stamped fenders can be drilled to fit a variety of mounting options. Mounting hardware not included.
Tie Down Engineering Dock Hardware - 14" Internal Pile Holder, Commercial Grade - 26434 - 241-26434F1
Commercial grade. Heavy duty 1/4" galvanized steel. Bolts to the dock directly. 4 Rollers allow it to move smoothly up and down the piling. Size: 24" x 24" x 7-15/16".
Tie Down Engineering Dock Hardware - 5" X 5" Back Up Plate, Commercial Grade - 26413 - 241-26413F1
Reinforcing plates are used to back up single T males and females. 5" x 5".
Tie Down Engineering Dock Hardware - Angle Brackets/Clip - 26379 - 241-26379F1
Commercial grade. Should be used for all cross supports. Each leg 10"L x 3"H", 3 holes.
Tie Down Engineering Dock Hardware - Angle Brackets/Clip - 26380 - 241-26380F1
Commercial grade. Should be used for all cross supports. Each leg 4"L x 7"H".
Tie Down Engineering Dock Hardware - Angle Brackets/Clip - 26392 - 241-26392F1
Commerical grade. Should be used for all cross supports. Each leg 2-3/4"L x 2-1/2"H.
Tie Down Engineering Dock Hardware - Angle Brackets/Clip - 26397 - 241-26397F1
Commercial Grade. Should be used for all cross supports. Each leg 4"L x 8"H.
Tie Down Engineering Dock Hardware - Angle Brackets/Clip - 26398 - 241-26398F1
Commercial grade. Should be used for all cross supports. Each leg 3"L x 5"H.
Tie Down Engineering Dock Hardware - Angle Brackets/Clip - 26399 - 241-26399F1
Commercial grade. Should be used for all cross supports. Each leg 2-1/2"L x 2-1/2"H".
Tie Down Engineering Dock Hardware - Angle Brackets/Clip - 26406 - 241-26406F1
Commercial grade. Should be used for all cross supports. Each leg 2-1/2"L x 5"H.
Tie Down Engineering Dock Hardware - Angle Brackets/Clip - 26422 - 241-26422F1
Commercial grade. Should be used for all cross supports. Each leg 2-3/4"L x 5"H.
Tie Down Engineering Dock Hardware - Angle Brackets/Clip - 26527 - 241-26527F1
Standard grade. Should be used for all cross supports. Each leg 2-1/2"L x 5"H.
Tie Down Engineering Dock Hardware - Backing Plate/Hurricane Strap, Standard Grade - 26369 - 241-26369F1
Standard grade for use with Piling Hoops. Size: 2" x 18" x 7 ga.
Tie Down Engineering Dock Hardware - Chain Retainer, Commercial Grade - 26410 - 241-26410F1
Commercial grade. Bolts to side of dock. Use weights and chain to hold dock in place. Accommodates 1/4", 3/8" and 1/2" chain. 5"L x 5"H.
Tie Down Engineering Dock Hardware - Galvanized Hex Head Bolt Set 3/4" X 3-1/2" (8 Per Bag) - 24279 - 241-24279F1
Standard grade. Includes lock nut. Used to connect male and female connectors. Galvanized 3/4" x 3-1/2".
Tie Down Engineering Dock Hardware - Galvanized Inside Rolling Ramp Bracket Includes Left And Right Ramp Brackets, Commercial Grade - 26431 - 241-26431F1
5" x 11" x 1/4" galvanized steel bracketIncludes left and right ramp brackets
Tie Down Engineering Dock Hardware - Heavy Duty 4" X 6" Deck Plate, Commercial Grade - 26416 - 241-26416F1
Heavy duty deck plate for use with Piling Hoop. This 3/16" thick 4"x 6" x 22" plate can be bolted from the top and side of the dock. The hoop can then be bolted to the deck plate, allowing it to be removed seasonally.
Tie Down Engineering Dock Hardware - Heavy Duty Hot Dipped Galvanized 6" Roller Assembly, Commercial Grade - 26414 - 241-26414F1
Commercial heavy duty roller assembly. Bracket and roller bolt directly to the deck plate (26416). An aid to the up and down motion of the dock in areas of tidal action. 6" roller turns on a 5/8" diameter shaft. 3/4" bracket is hot-dipped galvanized. Size: 10-1/2" x 2".
Tie Down Engineering Dock Hardware - Hot Dipped Galvanized Carriage Bolt Set (8 Per Bag) - 26534 - 241-26534F1
Used to attach component parts. 3/8 x 2-1/2" bolt, flat washer and nut. Hot dipped galvanized. Commercial grade 1/2" x 3".
Tie Down Engineering Dock Hardware - Hot Dipped Galvanized Carriage Bolt Set (8 Per Bag) - 26535 - 241-26535F1
Used to attach component parts. 3/8 x 2-1/2" bolt, flat washer and nut. Hot dipped galvanized. Commercial grade 1/2" x 3".
Tie Down Engineering Dock Hardware - Hot Dipped Galvanized Heavy Duty Piling Hoop, Commercial Grade - 26412 - 241-26412F1
Commerical grade. Heavy duty piling hoop for pilings up to 12" in diameter. The hoop is constructed of 1-1/2" pipe and is hot dip galvanized. It can be bolted directly to the side of the dock or to the optional deck plate.
Tie Down Engineering Dock Hardware - Hot Dipped Galvanized Lag Bolt Set (8 Per Bag) - 24287 - 241-24287F1
Standard grade bolt and flat washer hot dip galvanized used to attach flotation drums to dock system. Size: 3/8" x 2".
Tie Down Engineering Dock Hardware - Hot Dipped Galvanized Lag Bolt Set (8 Per Bag) - 24289 - 241-24289F1
Standard grade bolt and flat washer hot dip galvanized used to attach flotation drums to dock system. Size: 3/8" x 3".
Tie Down Engineering Dock Hardware - Hot Dipped Galvanized Lag Bolt Set (8 Per Bag) - 24292 - 241-24292F1
Commercial grade bolt and flat washer hot dip galvanized used to attach flotation drums to dock system. Size: 3/8" x 5".
