Docking & Fendering
Tie Down Engineering Dock Hardware - Inside Corner 10-1/2"L X 5"H With 2-1/4" Elongated Holes And Larger Brace, Commercial Grade - 26424 - 241-26424F1
Commercial grade. Should be used with one of the outside corners. Each leg has elongated holes for easy fit. 10-1/2"L x 5"H w/ 2-1/4" holes & larger brace.
Tie Down Engineering Dock Hardware - Inside Corner 8-1/4"L X 5"H - 26401 - 241-26401F1
Commercial grade. Should be used with one of the outside corners. Each leg has elongated holes for easy fit. 8-1/4"L x 5"H w/ Square holes.
Tie Down Engineering Dock Hardware - Inside Corner 8-1/4"L X 5"H - 26403 - 241-26403F1
Commercial grade. Should be used with one of the outside corners. Each leg has elongated holes for easy fit. 8-1/4"L x 5"H w/ 2-1/4" holes.
Tie Down Engineering Dock Hardware - Inside Corner 8-1/4"L X 5"H - 26417 - 241-26417F1
Commercial grade. Should be used with one of the outside corners. Each leg has elongated holes for easy fit. 8-1/4"L x 5"H w/ 3" holes.
Tie Down Engineering Dock Hardware - Inside Corner 8-1/4"L X 5"H - 26524 - 241-26524F1
Standard grade. Should be used with one of the outside corners. Each leg has elongated holes for easy fit. 8-1/4"L x 5"H w/ 2" holes.
Tie Down Engineering Dock Hardware - Inside Corner Pipe Holder, Commercial Grade - 26404 - 241-26404F1
Commercial grade. Should be used with one of the outside corners and has an internal pipe holder. 8-1/4"L x 5"H. Requires carriage bolt set for attaching. 2" Pipe.
Tie Down Engineering Dock Hardware - Inside Corner Pipe Holder, Commercial Grade - 26405 - 241-26405F1
Commercial grade. Should be used with one of the outside corners and has an internal pipe holder. 8-1/4"L x 5"H. Requires carriage bolt set for attaching. 2" Pipe.
Tie Down Engineering Dock Hardware - Outside Corner End - 26402 - 241-26402F1
Commercial grade. Use this corner at ends of fingers and docks. Ideal for swim floats and ski jump corners. Each leg is 10"L x 5"H.
Tie Down Engineering Dock Hardware - Outside Corner End - 26428 - 241-26428F1
Commercial grade. Use this corner at ends of fingers and docks. Ideal for swim floats and ski jump corners. Each leg is 12-1/4"L x 5"H.
Tie Down Engineering Dock Hardware - Outside Corner End - 26523 - 241-26523F1
Standard grade. Use this corner at ends of fingers and docks. Ideal for swim floats and ski jump corners. Each leg is 10"L x 5"H.
Tie Down Engineering Dock Hardware - Outside Corner/Female 10"L X 5"H - 26400 - 241-26400F1
Commercial grade. Two 1/2" welded tabs. Use with a male outside corner. Each leg is 10"L x 5"H.
Tie Down Engineering Dock Hardware - Outside Corner/Female 10"L X 5"H - 26521 - 241-26521F1
Standard grade. Two 1/2" welded tabs. Use with a male outside corner. Each leg is 10"L x 5"H.
Tie Down Engineering Dock Hardware - Outside Corner/Male 10"L X 5"H - 25491 - 241-25491F1
Standard grade. Use with a female outside corner to connect docks end to end. Joint requires 3/4" bolt set or connector pin. Each leg is 10"L x 5" H. 1/2" Welded Tab.
Tie Down Engineering Dock Hardware - Outside Corner/Male 10"L X 5"H - 26418 - 241-26418F1
Standard grade. Use with a female outside corner to connect docks end to end. Joint requires 3/4" bolt set or connector pin. Each leg is 10"L x 5" H. 1/2" Welded Tab.
Tie Down Engineering Dock Hardware - Outside Corner/Male 10"L X 5"H - 26522 - 241-26522F1
Standard grade. Use with a female outside corner to connect docks end to end. Joint requires 3/4" bolt set or connector pin. Each leg is 10"L x 5" H. 1/2" Welded Tab.
Tie Down Engineering Dock Hardware - Outside Pipe Holder - 24280 - 241-24280F1
Standard grade. Bolts to outside of dock. Uses 2" pipe to hold dock in place. Carriage bolt set required for attaching.
Tie Down Engineering Dock Hardware - Outside Pipe Holder - 26411 - 241-26411F1
Commercial grade. Bolts to outside of dock. Uses 2" pipe to hold dock in place. Carriage bolt set required for attaching.
Tie Down Engineering Dock Hardware - Piling Hoop And Roller Assembly, Commercial Grade - 26415 - 241-26415F1
Piling hoop & roller intended for areas with a lot of wind, current or tidal action. Combines the Piling hoop (26412) and roller assembly (26414) to make up for the up and down movement. For pilings up to 12" in diameter.
Tie Down Engineering Dock Hardware - Washer Plate - 24284 - 241-24284F1
Standard grade. Should be used with every Angle. Two required for each Angle. 1-1/2"L x 5"H.
Tie Down Engineering Dock Hardware - Washer Plate - 26409 - 241-26409F1
Commercial grade. Should be used with every Angle. Two required for each Angle. 1-1/2"L x 5"H.
Tie Down Engineering Dock Side Cross Beam Extension - 86916 - 241-86916F1
With the addition of the Cross Beam 28 Extension, the cross beam used in the Clamp Receiver with Cross Beam or the Slotted Receiver with Cross Beam can be lengthened for use on docks that are six feet wide.
Tie Down Engineering Dock Side Cross Beam Extension - 86934 - 241-86934F1
With the addition of the Cross Beam 28 Extension, the cross beam used in the Clamp Receiver with Cross Beam or the Slotted Receiver with Cross Beam can be lengthened for use on docks that are six feet wide.
Tie Down Engineering Dock Side Mounting Base - Magma Grill Kettle - 86913 - 241-86913F1
This mounting bracket provides secure mounting support for Magma's Kettle grills. Requires 1 receiver.
Tie Down Engineering Dock Side Slotted Receiver With Cross Beam - 86901 - 241-86901F1
The Slotted Style Receiver with the cross beam mounting bracket provides a secure mounting solution for solid side rail docks.The assembly mounts on the side rails of solid rail style docks and is secured to the side rails with two bolts on each side. Includes one slotted receiver with cross beam.
Tie Down Engineering Galvanized Dock Ladder - 28273 - 241-28273F1
Steps are galvanized for extra protection. Protects against rust and corrosion in salt water.
Tie Down Engineering Galvanized Dock Ladder - 28274 - 241-28274F1
Steps are galvanized for extra protection. Protects against rust and corrosion in salt water.
Tie Down Engineering Galvanized Dock Ladder - 28275 - 241-28275F1
Steps are galvanized for extra protection. Protects against rust and corrosion in salt water.
Tie Down Engineering Speed Release For Dock Ladder - 27271 - 241-27271F1
Steps are galvanized for extra protection. Protects against rust and corrosion in salt water. 250 lb. capacity.
Todd Tbs101 One Step Dock Step, 18" W X 22" D X 13" H - Tbs101 - 100-Tbs101F1
These lightweight, movable steps are made from U.V. resistant polyethylene for years of dependable service. Clean Up is made easy at the end of the day with just soap and water. Hand rails for the two and three step models are sold separately. Each model step is nestable upon itself for easy storage and shipping.
Todd Tbs202 Two Step Dock Step, 23-1/2" W X 26-3/4"D, X 17" H - Tbs202 - 100-Tbs202F1
These lightweight, movable steps are made from U.V. resistant polyethylene for years of dependable service. Clean Up is made easy at the end of the day with just soap and water. Hand rails for the two and three step models are sold separately. Each model step is nestable upon itself for easy storage and shipping.
Todd Tbs303 Three Step Dock Step, 25-1/2" W X 35" D X 25-1/2" H - Tbs303 - 100-Tbs303F1
These lightweight, movable steps are made from U.V. resistant polyethylene for years of dependable service. Clean Up is made easy at the end of the day with just soap and water. Hand rails for the two and three step models are sold separately. Each model step is nestable upon itself for easy storage and shipping.
Triangle Dock Box 54Wx33Dx27H - 83561 - 32-83561F1
These fiberglass dock boxes are built tough. With a UV gelcoat finish and the stainless steel lockable latch and hardware, these are sure to hold up in the harshest marine environments. They incorporate gas shock lifts, which come standard on all models. These shocks help to keep your lid open on rocking docks and in higher wind areas. Smooth surface interior finish.
Universal Dock Mount - 243485 - 353-243485F1
243485: Optional dock or piling mount is made from corrosion protected steel and stainless steel. It offers you flexibility of adjusted angle, depth in the water and 360° positioning. This dock mount can be used with any of Kasco's de-icer units. The de-icer unit may be extended down from the surface mounting bracket to a maximum length of 10'. You supply between 1' and 10' of 1 O.D. pipe, depending on how deep you want to suspend the unit.213001: Kasco De-icers can be attached to our optional flotation kit to create an elongated de-icing pattern in either fresh or salt water. Flotation application of Kasco De-icers is ideal for all de-icing needs and well suited for tough problems such as shallow water or where water and ice levels may fluctuate, such as tidal waters.
Vico Plastics X70A1Plug Mooring Pole Crutch Tip, 40-70" Pole - X70A-1-Plug - 577-X70A1Plugf1
Prevent dry rot and mildew. These lightweight telescoping poles are designed to support your cover so that water does not pool. Available in three styles. Each style is constructed of anodized aluminum tubing, which can be adjusted to desired height and are packaged 1 per box.
Whip 8' Line 2500Lb Prem 2500 Lb Cap. Replaces P/N 686-3200F - De3200F - 686-De3200Ff1
Whip Heavy Duty W/Adj. Base - I - 336-If1
Prevent boat and dock clashes. Constructed of solid fiberglass and equipped with the unique, patented mooring base that provides more versatility in mounting whips in any type of docking facility. Can be mounted vertically, horizontally, in back of, underneath or on the side corner of the dock. All are heavy duty with adjustable base. Mini moorwhips are standard duty. Set includes 2 poles and 2 bases.
Whip Heavy Duty W/Adj. Base - Ii - 336-Iif1
Prevent boat and dock clashes. Constructed of solid fiberglass and equipped with the unique, patented mooring base that provides more versatility in mounting whips in any type of docking facility. Can be mounted vertically, horizontally, in back of, underneath or on the side corner of the dock. All are heavy duty with adjustable base. Mini moorwhips are standard duty. Set includes 2 poles and 2 bases.
Whip Mini Std Duty W/Adj. Base - 0 - 336-00F1
Prevent boat and dock clashes. Constructed of solid fiberglass and equipped with the unique, patented mooring base that provides more versatility in mounting whips in any type of docking facility. Can be mounted vertically, horizontally, in back of, underneath or on the side corner of the dock. All are heavy duty with adjustable base. Mini moorwhips are standard duty. Set includes 2 poles and 2 bases.
Whip Mini Std Duty W/Adj. Base - 0 - 336-0F1
Prevent boat and dock clashes. Constructed of solid fiberglass and equipped with the unique, patented mooring base that provides more versatility in mounting whips in any type of docking facility. Can be mounted vertically, horizontally, in back of, underneath or on the side corner of the dock. All are heavy duty with adjustable base. Mini moorwhips are standard duty. Set includes 2 poles and 2 bases.
Whip Mini Std Duty W/Adj. Base - 0S - 336-0Sf1
Prevent boat and dock clashes. Constructed of solid fiberglass and equipped with the unique, patented mooring base that provides more versatility in mounting whips in any type of docking facility. Can be mounted vertically, horizontally, in back of, underneath or on the side corner of the dock. All are heavy duty with adjustable base. Mini moorwhips are standard duty. Set includes 2 poles and 2 bases.
White, Medium Double Molded Vinyl Dock Edging. 10' Straight - 46062 - 32-46062F1
Double molded vinyl dock edging is molded twice then molecularly bonded for extra durability and protection. A tough inner core is surrounded with our soft white vinyl for extra cushion against tough docks. Each piece installs easily to the edges of dock piers or floats with screws or nails.
Wichard 92326 Mooring Hook, 4" For 1/2" Rope - 92326 - 905-92326F1
The mooring hooks can be adapted for all types of boat hooks (not supplied). They are an economical and simple solution for fastenings to mooring buoys. Stainless steel.
Wichard 92327 Mooring Hook, 4-23/32" For 5/8" Rope - 92327 - 905-92327F1
The mooring hooks can be adapted for all types of boat hooks (not supplied). They are an economical and simple solution for fastenings to mooring buoys. Stainless steel.
Wichard 92328 Mooring Hook, 6-11/16" For 11/16" Rope - 92328 - 905-92328F1
The mooring hooks can be adapted for all types of boat hooks (not supplied). They are an economical and simple solution for fastenings to mooring buoys. Stainless steel.
Windshield / Door Bumper Pad, Black - 324390-1 - 354-3243901F1
Injection molded PVC.
Windshield / Door Bumper Pad, Clear - 324391-1 - 354-3243911F1
Injection molded PVC.
Wow Watersports 23Wil4962 Vacation Station Inflatable Dock - 23Wil4962 - 742-23Wil4962F1
Inflatable floating dock made with drop stitch technology. Features several reinforced D-rings, so you can connect this floating dock to other Vacation Stations, attach it to a boat, or anchor it. Velcro connection straps also make it easy to connect with other docks to make an even larger space. Includes hand pump with a pressure gauge and carrier, as well as the handles on all for sides for easy set up and transportation.
