Lines & Rigging
Sea-Dog 331280 Stainless Louvered Vent, 10-Louver - 331280 - 354-331280F1
Stamped 316 Stainless Steel. 331280 does not have a collector box available.
Sea-Dog 331204 Collector Box - 331204 - 354-331204F1
Constructed of injection molded polypropylene these collector boxes are designed to be used in conjunction with a louvered vent to facilitate air intake and exhaust. For use with either the 331200 or 331201 stainless louvered vents or 337210, 337211, or 337212 injection molded ABS louvered vents. Interchangeable with Attwood® part number's 1341 and 1342.
Sea-Dog 331203 Collector Box - 331203 - 354-331203F1
Constructed of injection molded polypropylene these collector boxes are designed to be used in conjunction with a louvered vent to facilitate air intake and exhaust. For use with either the 331200 or 331201 stainless louvered vents or 337210, 337211, or 337212 injection molded ABS louvered vents. Interchangeable with Attwood® part number's 1341 and 1342. 331203 can accept the 337600 3" collector box hose adapter.
Sea-Dog 331202 Collector Box - 331202 - 354-331202F1
Constructed of injection molded polypropylene these collector boxes are designed to be used in conjunction with a louvered vent to facilitate air intake and exhaust. For use with either the 331200 or 331201 stainless louvered vents or 337210, 337211, or 337212 injection molded ABS louvered vents. Interchangeable with Attwood® part number's 1341 and 1342. 331202 is available without holes to allow for custom installations.
Sea-Dog 331201 Stainless Recessed Louvered Vent - 331201 - 354-331201F1
Corrosion resistant 316 stainless steel. Use with a collector box to facilitate air intake and exhaust. Designed with recessed louvers to create a flush vent surface area reducing possible damage to the vent as well as preventing chafing to mooring lines, fishing lines, etc.
Sea-Dog 331200 Stainless Louvered Vent - 331200 - 354-331200F1
Corrosion resistant 316 stainless steel vents are designed to be used in conjunction with a collector box to facilitate air intake and exhaust. Installs w/six #6 RH fasteners (not included).
Sea-Dog 329808 50' Coaxial Cable Assembly - 329808-1 - 354-3298081F1
Nickel plated brass coaxial cable assemblies. RG-58U Coax cable is pre-assembled with PL-259 fittings on both ends for quick installation of hardware.
Sea-Dog 3298061 20' Coaxial Cable Assembly - 329806-1 - 354-3298061F1
Nickel plated brass coaxial cable assemblies. RG-58U Coax cable is pre-assembled with PL-259 fittings on both ends for quick installation of hardware.
Sea-Dog 3298041 Coaxial Cable Assembly, A:10", B: 2", C:1-3/4", D:11/16", - 329804-1 - 354-3298041F1
Nickel plated brass coaxial cable assemblies. RG-58U Coax cable is pre-assembled with PL-259 fittings on both ends for quick installation of hardware.
Sea-Dog 3298021 5' Coaxial Cable Assembly - 329802-1 - 354-3298021F1
Nickel plated brass coaxial cable assemblies. RG-58U Coax cable is pre-assembled with PL-259 fittings on both ends for quick installation of hardware.
Sea-Dog 3281971 Nylon Flagpole Pennant Mounts & Stainless Clips, 4/Set - 328197-1 - 354-3281971F1
Nylon adjustable flag pole mount clip used in conjunction with stainless steel spring wire quick release clip can be positioned and repositioned on a flag pole allowing mounting flexibility for a variety of flag or pennant sizes. Stainless spring clips are designed to hold their shape after continued use.
Sea-Dog 3281951 Stainless Flag Pole Hole Mount Pennant Clips, 4/Set - 328195-1 - 354-3281951F1
Stainless spring wire quick release clips are designed to hold their shape after continued use.
Sea-Dog 3281901 Flag Clips For 1/2" Dia Pole, Pr. - 328190-1 - 354-3281901F1
Flag is attached to the flag pole using nylon adjustable flag pole clips in conjunction with stainless steel spring wire quick release clips
Sea-Dog 328160 Hawse Pipe - 328160-1 - 354-3281601F1
Designed to protect the boats hull against damage from anchor line and chain while also reducing rope chafe. Investment cast 316 stainless steel construction for corrosion resistance and durability. Installs with four fasteners (not included).
Sea-Dog 328050 Short Bow Roller - 328050 - 354-328050F1
Investment Cast 316 Stainless Steel body & wheel.
Sea-Dog 3271911 Rail Mount Bracket - Round, For 1-1/8" - 1-1/4" Rail, Black - 327191-1 - 354-3271911F1
Injection Molded Nylon/Stainless Steel Screws.
Sea-Dog 3271901 Rail Mount Bracket - Round, For 7/8" - 1" Rail, Black, 2/Pk - 327190-1 - 354-3271901F1
Injection Molded Nylon/Stainless Steel Screws.
Sea-Dog 327135 Rail Mount Horseshoe Buoy Bracket - 327135-1 - 354-3271351F1
Can be used on 7/8" or 1" tubing or mounted directly to a flat surface. Comes complete with all necessary hardware to mount on tubing. Made from marine grade stamped aluminum and powder coated for a long lasting finish.
Sea-Dog 3271121 Rail Mount Fairlead With Stainless Insert - 327112-1 - 354-3271121F1
Includes a nylon fair lead with stainless insert. Allows easy routing of roller furling lines. The stainless insert allows use of wire lines if necessary. Fits 7/8" - 1" railing.
Sea-Dog 3271111 Rail Mount Cleat - 327111-1 - 354-3271111F1
Includes a Heavy Duty Black Nylon Cleat. Ideal for easy attachment of fender, flag halyards, canvas tie downs and related accessories.
Sea-Dog 327105 Rail Mount Brackets W/Screws, White, 1 Pr. - 327105-1 - 354-3271051F1
Designed for easy attachment to 7/8" - 1" tubing. The injection molded nylon mounting parts and rubber liners allow for positive attachment without scratching or marring the tubing.
Sea-Dog 327101 Rail Mount Brackets W/Oval Plates, Black, 1 Pr. - 327101-1 - 354-3271011F1
Designed for easy attachment to 7/8" - 1" tubing. The injection molded nylon mounting parts and rubber liners allow for positive attachment without scratching or marring the tubing.
Sea-Dog 3271001 Rail Mount Brackets W/Screws, Black, 1 Pr. - 327100-1 - 354-3271001F1
Designed for easy attachment to 7/8" - 1" tubing. The injection molded nylon mounting parts and rubber liners allow for positive attachment without scratching or marring the tubing.
Sea-Dog 3265803 Fillet Table, 20" W X 12-5/8" D, Table Only - 326580-3 - 354-3265803F1
Solid one-piece construction for long life and easy maintenanceUV stabilized high-density polypropylene constructionEasily accessible knife and pliers holders, large table features additional hose holder and towel barKnives and pliers not includedDoes Not Include Mounting Hardware
Sea-Dog 3265353 Fillet & Prep Table Square Rail Mount, A:30", B:12-5/8", C:13-1/2", D:2-3/8", Large, Fits Tubing: 1"-1-1/4" - 326535-3 - 354-3265353F1
Solid one-piece construction for long life and easy maintenanceUV stabilized high density polypropylene constructionMedium: 20" wide by 12-5/8" deep, Large: 30" wide by 12-5/8" deepFits square tubing 1" - 1-1/4" diameterAssembles in minutes, all assembly hardware includedEasily accessible knife and pliers holders, large table features additional hose holder and towel barKnives and pliers not included
Sea-Dog 3265303 Fillet & Prep Table Square Rail Mount, A:20", B:12-5/8", C 13-1/2", D:2", Medium, Fits Tubing: 1"-1-1/4" - 326530-3 - 354-3265303F1
Solid one-piece construction for long life and easy maintenanceUV stabilized high density polypropylene constructionMedium: 20" wide by 12-5/8" deep, Large: 30" wide by 12-5/8" deepFits square tubing 1" - 1-1/4" diameterAssembles in minutes, all assembly hardware includedEasily accessible knife and pliers holders, large table features additional hose holder and towel barKnives and pliers not included
Sea-Dog 3265253 Fillet & Prep Table Round Rail Mount, A: 20", B:12-5/8", C:13-1/2", D:2-3/8", Large, 3/4"-1-1/4" - 326525-3 - 354-3265253F1
Solid one-piece construction for long life and easy maintenanceUV stabilized high density polypropylene constructionMedium: 20" wide by 12-5/8" deep, Large: 30" wide by 12-5/8" deepFits round tubing 3/4"-1-1/4" diameterEasily accessible knife and pliers holders, large table features additional hose holder and towel barKnives and pliers not included
Sea-Dog 3265203 Fillet & Prep Table Round Rail Mount, A: 20", B:12-5/8", C:13-1/2", D:2", Medium, 3/4"-1-1/4" - 326520-3 - 354-3265203F1
Solid one-piece construction for long life and easy maintenanceUV stabilized high density polypropylene constructionMedium: 20" wide by 12-5/8" deep, Large: 30" wide by 12-5/8" deepFits round tubing 3/4"-1-1/4" diameterEasily accessible knife and pliers holders, large table features additional hose holder and towel barKnives and pliers not included
Sea-Dog 3256241 4-Rod Storage Rack - 325624-1 - 354-3256241F1
Constructed of extremely durable, high-strength UV resistant polypropylene. For horizontal and overhead installation. Rods are secured with bungee cord attachment. Installs with twelve #8 FH fasteners (included).
Sea-Dog 325168 Flush Mount Rod Holder W/Stainless Top - 325168-1 - 354-3251681F1
Constructed of UV resistant injection molded ABS with a stainless steel top cap. Features a 30° angle. Accommodates rods up to 1-5/8". Installs with three #12 FH fasteners (not included).
Sea-Dog 3250651 Narrow Gunnel Rod Holder W/Stainless Top - 325065-1 - 354-3250651F1
This Narrow Gunnel Flush Mount Rod Holder with Stainless Top is designed for narrow gunnel applications. Accommodates rods up to 1-5/8" in diameter. Features a 30° angle. Constructed of UV resistant injection molded ABS with highly polished investment cast 316 stainless top. Installs with three #10 FH fasteners (not included).
Sea-Dog 325041 Pvc Clips For Track Rod Holder - 325041 - 354-325041F1
Designed to hold fishing rods in the toughest conditions. Track sold separately
Sea-Dog 3222701 Ladder Locks, Chrome - 322270-1 - 354-3222701F1
Ladder Locks are commonly used with wooden step ladders. Ladder slips into tapered locks and becomes secure as it is lowered in to place. Installs with eight #10 FH fasteners (not included). Highly polished chrome.
Sea-Dog 3216601 Hatch Spring - 321660-1 - 354-3216601F1
Formed 304 Stainless Steel.
Sea-Dog 3216501 Hatch Spring - 321650-1 - 354-3216501F1
The Sea-Dog Stainless Steel Hatch Spring has an internal wire that prevents the spring from being overextended during normal use. Not recommended for applications where hatch will scoop wind while boat is underway and overextend.
Sea-Dog 3215861 Gas Lift Ball Stud-10Mm - 321586-1 - 354-3215861F1
Gas Lift Mounts and ball studs are constructed of 304 stainless steel. Used for mounting gas filled lift springs. Installs with #10 RH fasteners (not included). 10 mm ball.
Sea-Dog 321586 Gas Lift Ball Stud - 10Mm - 321586 - 354-321586F1
Gas Lift Mounts and ball studs are constructed of 304 stainless steel. Used for mounting gas filled lift springs. Installs with #10 RH fasteners (not included). 10 mm ball.
Sea-Dog 3215831 Flush Gas Lift - 321583-1 - 354-3215831F1
Gas Lift Mounts and ball studs are constructed of 304 stainless steel. Used for mounting gas filled lift springs. Installs with #10 RH fasteners (not included). 10 mm ball.
Sea-Dog 3215821 90° Gas Lift Mount-Mount-Wide - 321582-1 - 354-3215821F1
Gas Lift Mounts and ball studs are constructed of 304 stainless steel. Used for mounting gas filled lift springs. Installs with #10 RH fasteners (not included). 10 mm ball.
Sea-Dog 3215811 90° Gas Lift Mount-Narrow - 321581-1 - 354-3215811F1
Gas Lift Mounts and ball studs are constructed of 304 stainless steel. Used for mounting gas filled lift springs. Installs with #10 RH fasteners (not included). 10 mm ball.
Sea-Dog 3-Sided Bristle Brush, Stiff, White - 491090-1 - 354-4910901F1
These Boat Hook Three Sided Bristle Brushes fit all Sea-Dog® Boat Hooks and universal/Acme threaded devices. Stiff bristles (white) are effective for jobs below the waterline, teak, and other tough cleaning jobs. Side bristles make it easy to clean in hard to reach places. 10-1/2" head is longer than industry standard, covering a larger cleaning area.
Sea-Dog 3-Sided Bristle Brush, Soft, Blue - 491070-1 - 354-4910701F1
These Boat Hook Three Sided Bristle Brushes fit all Sea-Dog® Boat Hooks and universal/Acme threaded devices. Soft bristles (blue) are scratch resistant for gelcoat, paint, and plastic windows. Side bristles make it easy to clean in hard to reach places. 10-1/2" head is longer than industry standard, covering a larger cleaning area.
Sea-Dog 3-Sided Bristle Brush, Medium, Yellow - 491080-1 - 354-4910801F1
These Boat Hook Three Sided Bristle Brushes fit all Sea-Dog® Boat Hooks and universal/Acme threaded devices. The medium bristles (yellow) are a good overall brush for textured and non-skid surfaces. Side bristles make it easy to clean in hard to reach places. 10-1/2" head is longer than industry standard, covering a larger cleaning area.
Sea-Dog 2991191 Snap Turn Buckle - #7 Brass Wood Screw, Nickel Plated Brass, 2 Sets - 299119-1 - 354-2991191F1
Nickel plated brass canvas fasteners. Excellent snap action and holding strength. Easy Installation.
Sea-Dog 2991181 Snap Turn Buckle Eyelet & Washer, Nickel Plated Brass, 2 Sets - 299118-1 - 354-2991181F1
Nickel plated brass canvas fasteners. Excellent snap action and holding strength. Easy Installation.
Sea-Dog 2991171 Snap Turn Buckle - 2 Prong Clinch & Back Plate, Nickel Plated Brass, 2 Sets - 299117-1 - 354-2991171F1
Nickel plated brass canvas fasteners. Excellent snap action and holding strength. Easy Installation.
Sea-Dog 2991161 Snap Turn Buckle - 2 Screw Base, Nickel Plated Brass, 2 Sets - 299116-1 - 354-2991161F1
Nickel plated brass canvas fasteners. Excellent snap action and holding strength. Easy Installation.
Sea-Dog 2991151 Canvas Snap Stud (#10-32 Mach. Screw), Nickel Plated Brass, 5 Sets - 299115-1 - 354-2991151F1
Nickel plated brass canvas fasteners. Excellent snap action and holding strength. Easy Installation.
Sea-Dog 2991141 Screw Snap Stud (#8 Screw), Nickel Plated Brass, 6 Sets - 299114-1 - 354-2991141F1
Nickel plated brass canvas fasteners. Excellent snap action and holding strength. Easy Installation.
Sea-Dog 2991131 Screw Snap Stud (#10 Screw), Nickel Plated Brass, 6 Sets - 299113-1 - 354-2991131F1
Nickel plated brass canvas fasteners. Excellent snap action and holding strength. Easy Installation.
Sea-Dog 2991121 Screw Snap Stud (#8 Screw), Nickel Plated Brass, 6 Sets - 299112-1 - 354-2991121F1
Nickel plated brass canvas fasteners. Excellent snap action and holding strength. Easy Installation.
Sea-Dog 2991111 Screw Snap Stud (#8 Screw), Nickel Plated Brass, 6 Sets - 299111-1 - 354-2991111F1
Nickel plated brass canvas fasteners. Excellent snap action and holding strength. Easy Installation.
Sea-Dog 2991101 Eyelet Snap Stud, Nickel Plated Brass, 6 Sets - 299110-1 - 354-2991101F1
Nickel plated brass canvas fasteners. Excellent snap action and holding strength. Easy Installation.
Sea-Dog 2991091 Snap Cap & Socket, Nickel Plated Brass, 6 Sets - 299109-1 - 354-2991091F1
Nickel plated brass canvas fasteners. Excellent snap action and holding strength. Easy Installation.
Sea-Dog 2991081 Snap Cap & Socket, Nickel Plated Brass, 6 Sets - 299108-1 - 354-2991081F1
Nickel plated brass canvas fasteners. Excellent snap action and holding strength. Easy Installation.
Sea-Dog 2891651 16-1/2 Rail End, Male, Stainless, 7/8" Tubing" - 289165-1 - 354-2891651F1
These hand rail fittings are constructed of investment cast 316 stainless steel for corrosion resistance and durability. Designed for use with 7/8" OD stainless tubing with a wall thickness of .049". Includes set screws where appropriate.
Sea-Dog 2891551 5-1/2 Rail End, Female, Stainless, 7/8" Tubing" - 289155-1 - 354-2891551F1
These hand rail fittings are constructed of investment cast 316 stainless steel for corrosion resistance and durability. Designed for use with 7/8" OD stainless tubing with a wall thickness of .049". Includes set screws where appropriate.
Sea-Dog 288291 Bullet End, Stainless, 1" Tubing - 288291 - 354-288291F1
These hand rail fittings are constructed of investment cast 316 stainless steel for corrosion resistance and durability. Designed for use with 1" OD stainless tubing with a wall thickness of .049". Includes set screws where appropriate.
Sea-Dog 2882901 Bullet End, Stainless, 7/8" Tubing - 288290-1 - 354-2882901F1
These hand rail fittings are constructed of investment cast 316 stainless steel for corrosion resistance and durability. Designed for use with 7/8" OD stainless tubing with a wall thickness of .049". Includes set screws where appropriate.
Sea-Dog 285166 60° End (Starboard) Stanchion, Stainless, 7/8" Tubing - 285166-1 - 354-2851661F1
These hand rail fittings are constructed of investment cast 316 stainless steel for corrosion resistance and durability. Designed for use with 7/8" OD stainless tubing with a wall thickness of .049". Includes set screws where appropriate.
Sea-Dog 285165 60° End (Port) Stanchion, Stainless, 7/8" Tubing - 285165-1 - 354-2851651F1
These hand rail fittings are constructed of investment cast 316 stainless steel for corrosion resistance and durability. Designed for use with 7/8" OD stainless tubing with a wall thickness of .049". Includes set screws where appropriate.
Sea-Dog 2851601 60° End Stanchion, Stainless, 7/8" Tubing - 285160-1 - 354-2851601F1
These hand rail fittings are constructed of investment cast 316 stainless steel for corrosion resistance and durability. Designed for use with 7/8" OD stainless tubing with a wall thickness of .049". Includes set screws where appropriate.
Sea-Dog 2850661 60° Center (Starboard) Stanchion, Stainless, 7/8" Tubing - 285066-1 - 354-2850661F1
These hand rail fittings are constructed of investment cast 316 stainless steel for corrosion resistance and durability. Designed for use with 7/8" OD stainless tubing with a wall thickness of .049". Includes set screws where appropriate.
Sea-Dog 2850651 60° Center (Port) Stanchion, Stainless, 7/8" Tubing - 285065-1 - 354-2850651F1
These hand rail fittings are constructed of investment cast 316 stainless steel for corrosion resistance and durability. Designed for use with 7/8" OD stainless tubing with a wall thickness of .049". Includes set screws where appropriate.
Sea-Dog 2850611 60° Center, Stainless, 1" Tubing - 285061-1 - 354-2850611F1
These hand rail fittings are constructed of investment cast 316 stainless steel for corrosion resistance and durability. Designed for use with 1" OD stainless tubing with a wall thickness of .049". Includes set screws where appropriate.
Sea-Dog 2850601 60° Center Stanchion, Stainless, 7/8" Tubing - 285060-1 - 354-2850601F1
These hand rail fittings are constructed of investment cast 316 stainless steel for corrosion resistance and durability. Designed for use with 7/8" OD stainless tubing with a wall thickness of .049". Includes set screws where appropriate.
Sea-Dog 2819011 90° Rectangular Base, 1" Ss - 281901-1 - 354-2819011F1
These Rectangular Rail Base Fittings are constructed of investment cast 316 stainless steel for corrosion resistance and durability. Designed for use with 1" OD stainless tubing with a wall thickness of 0.049". Includes set screws where appropriate. Installs with four 1/4 FH fasteners (not included).
Sea-Dog 2819001 90° Rectangular Base, 7/8" Ss - 281900-1 - 354-2819001F1
These Rectangular Rail Base Fittings are constructed of investment cast 316 stainless steel for corrosion resistance and durability. Designed for use with 7/8" OD stainless tubing with a wall thickness of 0.049". Includes set screws where appropriate. Installs with four #10 FH fasteners (not included).
Sea-Dog 2816011 60° Rectangular Base, 1" Ss - 281601-1 - 354-2816011F1
These Rectangular Rail Base Fittings are constructed of investment cast 316 stainless steel for corrosion resistance and durability. Designed for use with 1" OD stainless tubing with a wall thickness of 0.049". Includes set screws where appropriate. Installs with four 1/4 FH fasteners (not included).
Sea-Dog 2816001 60° Rectangular Base, 7/8" Ss - 281600-1 - 354-2816001F1
These Rectangular Rail Base Fittings are constructed of investment cast 316 stainless steel for corrosion resistance and durability. Designed for use with 7/8" OD stainless tubing with a wall thickness of 0.049". Includes set screws where appropriate. Installs with four #10 FH fasteners (not included).
Sea-Dog 2814511 45° Rectangular Base, 1" Ss - 281451-1 - 354-2814511F1
These Rectangular Rail Base Fittings are constructed of investment cast 316 stainless steel for corrosion resistance and durability. Designed for use with 1" OD stainless tubing with a wall thickness of 0.049". Includes set screws where appropriate. Installs with four 1/4 FH fasteners (not included).
Sea-Dog 2814501 45° Rectangular Base, 7/8" Ss - 281450-1 - 354-2814501F1
These Rectangular Rail Base Fittings are constructed of investment cast 316 stainless steel for corrosion resistance and durability. Designed for use with 7/8" OD stainless tubing with a wall thickness of 0.049". Includes set screws where appropriate. Installs with four #10 FH fasteners (not included).
Sea-Dog 2813011 30° Rectangular Base, 1" Ss - 281301-1 - 354-2813011F1
These Rectangular Rail Base Fittings are constructed of investment cast 316 stainless steel for corrosion resistance and durability. Designed for use with 1" OD stainless tubing with a wall thickness of 0.049". Includes set screws where appropriate. Installs with four 1/4 FH fasteners (not included).
Sea-Dog 2813001 30° Rectangular Base, 7/8" Ss - 281300-1 - 354-2813001F1
These Rectangular Rail Base Fittings are constructed of investment cast 316 stainless steel for corrosion resistance and durability. Designed for use with 7/8" OD stainless tubing with a wall thickness of 0.049". Includes set screws where appropriate. Installs with four #10 FH fasteners (not included).
Sea-Dog 2809211 90° (Low) Round Base 1" Ss - 280921-1 - 354-2809211F1
Constructed of investment cast 316 stainless steel for corrosion resistance and durability. Includes set screws where appropriate. Installs with fasteners, not included.
Sea-Dog 2761601 Jaw Slide, 7/8" Chrome Zinc, Pair - 276160-1 - 354-2761601F1
Constructed of chrome plated die cast zinc these Bimini top fittings are recommended for freshwater use.
Sea-Dog 2761001 External Eye End, 7/8" Chrome Zinc, Pair - 276100-1 - 354-2761001F1
Constructed of chrome plated die cast zinc these Bimini top fittings are recommended for freshwater use. Pin size 1/4".
Sea-Dog 2736701 Canvas Stud Clip, Nylon Windshield Canvas Stud Clip - 273670-1 - 354-2736701F1
Sea-Dog 2731661 Jaw Slide, 3/4" White, Pair - 273166-1 - 354-2731661F1
Used as part of a Bimini top system, jaw slides attach an eye end securely to support tubing. For installing a new Bimini top to boat rails or for adding additional support arms to an existing top. These injection molded nylon fittings are durable, UV and corrosion resistant. Set screw on back allows you to quickly and easily adjust the placement of these slides.
Sea-Dog 2731651 Jaw Slide, 3/4" Black, Pair - 273165-1 - 354-2731651F1
Used as part of a Bimini top system, jaw slides attach an eye end securely to support tubing. For installing a new Bimini top to boat rails or for adding additional support arms to an existing top. These injection molded nylon fittings are durable, UV and corrosion resistant. Set screw on back allows you to quickly and easily adjust the placement of these slides.
Sea-Dog 2731631 Jaw Slide, 7/8" White Hinged - 273163-1 - 354-2731631F1
Used as part of a Bimini top system, jaw slides attach an eye end securely to support tubing. For installing a new Bimini top to boat rails or for adding additional support arms to an existing top. These injection molded nylon fittings are durable, UV and corrosion resistant. Set screw on back allows you to quickly and easily adjust the placement of these slides. Hinged jaw slides fit 7/8" tubing and are ideal for mounting on handrails, or in applications where it is not possible, or convenient, to slide the fitting on.
Sea-Dog 2731611 Jaw Slide, 7/8" White, Pair - 273161-1 - 354-2731611F1
Used as part of a Bimini top system, jaw slides attach an eye end securely to support tubing. For installing a new Bimini top to boat rails or for adding additional support arms to an existing top. These injection molded nylon fittings are durable, UV and corrosion resistant. Set screw on back allows you to quickly and easily adjust the placement of these slides.
Sea-Dog 2731601 Jaw Slide, 7/8" Black, Pair - 273160-1 - 354-2731601F1
Used as part of a Bimini top system, jaw slides attach an eye end securely to support tubing. For installing a new Bimini top to boat rails or for adding additional support arms to an existing top. These injection molded nylon fittings are durable, UV and corrosion resistant. Set screw on back allows you to quickly and easily adjust the placement of these slides.
Sea-Dog 2731111 External Eye End, 3/4" White, Pair - 273111-1 - 354-2731111F1
UV stabilized injection molded nylon top fittings connect to tubing and creates an attachment point as part of a Bimini top system. Top fittings function as a pivot point for your canvas top. 1/4" Pin size.
Sea-Dog 2731101 External Eye End, 3/4" Black, Pair - 273110-1 - 354-2731101F1
UV stabilized injection molded nylon top fittings connect to tubing and creates an attachment point as part of a Bimini top system. Top fittings function as a pivot point for your canvas top. 1/4" Pin size.
Sea-Dog 2731011 External Eye End, 7/8" White, Pair - 273101-1 - 354-2731011F1
UV stabilized injection molded nylon top fittings connect to tubing and creates an attachment point as part of a Bimini top system. Top fittings function as a pivot point for your canvas top. 1/4" Pin size.
Sea-Dog 2731001 External Eye End, 7/8" Black, Pair - 273100-1 - 354-2731001F1
UV stabilized injection molded nylon top fittings connect to tubing and creates an attachment point as part of a Bimini top system. Top fittings function as a pivot point for your canvas top. 1/4" Pin size.
Sea-Dog 270171 Jaw Slide, Stainless, 1" - 270171-1 - 354-2701711F1
Used as part of a Bimini top system jaw slides attach an eye end securely to support tubing. For installing a new Bimini top, adding additional support arms to an existing one or customizing a cock pit or sun deck awning. These investment cast 316 stainless steel fittings are durable and corrosion resistant. Set screw on back allows you to quickly and easily adjust the placement of these slides where they are needed.
Sea-Dog 2701651 Jaw Slide, 3/4" Stainless, Each - 270165-1 - 354-2701651F1
Used as part of a Bimini top system jaw slides attach an eye end securely to support tubing. For installing a new Bimini top, adding additional support arms to an existing one or customizing a cock pit or sun deck awning. These investment cast 316 stainless steel fittings are durable and corrosion resistant. Set screw on back allows you to quickly and easily adjust the placement of these slides where they are needed.
Sea-Dog 2701611 Jaw Slide, Stainless, 1" - 270161-1 - 354-2701611F1
Used as part of a Bimini top system jaw slides attach an eye end securely to support tubing. For installing a new Bimini top, adding additional support arms to an existing one or customizing a cock pit or sun deck awning. These investment cast 316 stainless steel fittings are durable and corrosion resistant. Set screw on back allows you to quickly and easily adjust the placement of these slides where they are needed.
Sea-Dog 2701601 Jaw Slide, Stainless, 7/8" - 270160-1 - 354-2701601F1
Used as part of a Bimini top system jaw slides attach an eye end securely to support tubing. For installing a new Bimini top, adding additional support arms to an existing one or customizing a cock pit or sun deck awning. These investment cast 316 stainless steel fittings are durable and corrosion resistant. Set screw on back allows you to quickly and easily adjust the placement of these slides where they are needed.
Sea-Dog 2701111 External Eye End 1" Stainless, Each - 270111-1 - 354-2701111F1
Corrosion resistant investment cast 316 stainless steel construction; these top fittings connect to tubing and create an attachment point as part of a Bimini top system. Top fittings function as a pivot point for your canvas top. For use on round tubing as a top cap
Sea-Dog 2701011 External Eye End 1" Stainless, Each - 270101-1 - 354-2701011F1
Corrosion resistant investment cast 316 stainless steel construction; these top fittings connect to tubing and create an attachment point as part of a Bimini top system. Top fittings function as a pivot point for your canvas top. For use on round tubing as a top cap
Sea-Dog 2701001 External Eye End, 7/8" Stainless, Each - 270100-1 - 354-2701001F1
Corrosion resistant investment cast 316 stainless steel construction; these top fittings connect to tubing and create an attachment point as part of a Bimini top system. Top fittings function as a pivot point for your canvas top. For use on round tubing as a top cap
Sea-Dog 2546381 Stud Mount Flanged Handrail, Tube: 7/8" A:25-1/4" , B: 24-1/4", C: 2-1/4", D:1-1/2" , Fastener: 5/16"-18, Black Matte - 254638-1 - 354-2546381F1
Provides a larger mounting surface for greater stability. Functional and attractive, with no visible mounting hardware. Constructed of corrosion resistant formed 304 stainless steel also available in black matte finish. Installs with two 5/16"-18 nuts (included).
Sea-Dog 2546361 Stud Mount Flanged Handrail, Tube: 7/8" A:19-3/8" , B:18" , C: 2-1/4", D:1-1/2" , Fastener: 5/16"-18, Black Matte - 254636-1 - 354-2546361F1
Provides a larger mounting surface for greater stability. Functional and attractive, with no visible mounting hardware. Constructed of corrosion resistant formed 304 stainless steel also available in black matte finish. Installs with two 5/16"-18 nuts (included).
Sea-Dog 2546321 Stud Mount Flanged Handrail, Tube: 7/8" A: 13-1/2", B: 12", C: 2-1/4", D:1-1/2" , Fastener: 5/16"-18, Black Matte - 254632-1 - 354-2546321F1
Provides a larger mounting surface for greater stability. Functional and attractive, with no visible mounting hardware. Constructed of corrosion resistant formed 304 stainless steel also available in black matte finish. Installs with two 5/16"-18 nuts (included).
Sea-Dog 2546301 Stud Mount Flanged Handrail, Tube: 7/8" A:10" , B:8-3/4" , C: 2-1/4", D:1-1/2" , Fastener: 5/16"-18, Black Matte - 254630-1 - 354-2546301F1
Provides a larger mounting surface for greater stability. Functional and attractive, with no visible mounting hardware. Constructed of corrosion resistant formed 304 stainless steel also available in black matte finish. Installs with two 5/16"-18 nuts (included).
Sea-Dog 2546281 Stud Mount Flanged Handrail, Tube: 7/8" A: 25-1/4" , B: 24-1/4" , C: 2-1/4", D:1-1/2" , Fastener: 5/16"-18,Stainless - 254628-1 - 354-2546281F1
Provides a larger mounting surface for greater stability. Functional and attractive, with no visible mounting hardware. Constructed of corrosion resistant formed 304 stainless steel also available in black matte finish. Installs with two 5/16"-18 nuts (included).
Sea-Dog 2546261 Stud Mount Flanged Handrail, Tube: 7/8" A: 19-3/8" , B: 18", C: 2-1/4", D:1-1/2" , Fastener: 5/16"-18, Stainless - 254626-1 - 354-2546261F1
Provides a larger mounting surface for greater stability. Functional and attractive, with no visible mounting hardware. Constructed of corrosion resistant formed 304 stainless steel also available in black matte finish. Installs with two 5/16"-18 nuts (included).
Sea-Dog 2546221 Stud Mount Flanged Handrail, Tube: 7/8" A:13-1/2", B: 12", C: 2-1/4", D:1-1/2" , Fastener: 5/16"-18, Stainless - 254622-1 - 354-2546221F1
Provides a larger mounting surface for greater stability. Functional and attractive, with no visible mounting hardware. Constructed of corrosion resistant formed 304 stainless steel also available in black matte finish. Installs with two 5/16"-18 nuts (included).
Sea-Dog 2546201 Stud Mount Flanged Handrail, Tube: 7/8" A:10" , B: 8-3/4", C: 2-1/4", D:1-1/2" , Fastener: 5/16"-18, Stainless - 254620-1 - 354-2546201F1
Provides a larger mounting surface for greater stability. Functional and attractive, with no visible mounting hardware. Constructed of corrosion resistant formed 304 stainless steel also available in black matte finish. Installs with two 5/16"-18 nuts (included).
Sea-Dog 2546191 Stud Mount Handrail, Tube: 3/4", A: 24", B: 22-1/2", C: 2", D:1-1/4" Fastener: 5/16"-18 Nut, Black Matte - 254619-1 - 354-2546191F1
Designed to provide a sleek, smooth handrail transition to the mounting surface of your boat. Functional and attractive, with no visible mounting hardware. Constructed of corrosion resistant formed 304 stainless steel also available in black matte finish. Installs with two 5/16"-18 nuts (included).
Sea-Dog 2546171 Stud Mount Handrail, Tube: 3/4", A: 18-1/2", B:16-3/4", C: 2" , D:1-1/4" Fastener: 5/16"-18 Nut,Black Matte - 254617-1 - 354-2546171F1
Designed to provide a sleek, smooth handrail transition to the mounting surface of your boat. Functional and attractive, with no visible mounting hardware. Constructed of corrosion resistant formed 304 stainless steel also available in black matte finish. Installs with two 5/16"-18 nuts (included).
Sea-Dog 2546131 Stud Mount Handrail, Tube: 3/4", A:12" ,B:10-3/4 ", C:2", D:1-1/4" Fastener: 5/16"-18 Nut, Black Matte - 254613-1 - 354-2546131F1
Designed to provide a sleek, smooth handrail transition to the mounting surface of your boat. Functional and attractive, with no visible mounting hardware. Constructed of corrosion resistant formed 304 stainless steel also available in black matte finish. Installs with two 5/16"-18 nuts (included).
Sea-Dog 2546111 Stud Mount Handrail, Tube: 3/4", A:8-3/4 " B: 7-1/2" C:1-3/4" D:1-1/4" Fastener: 5/16"-18 Nut, Black Matte - 254611-1 - 354-2546111F1
Designed to provide a sleek, smooth handrail transition to the mounting surface of your boat. Functional and attractive, with no visible mounting hardware. Constructed of corrosion resistant formed 304 stainless steel also available in black matte finish. Installs with two 5/16"-18 nuts (included).
Sea-Dog 2546091 Stud Mount Handrail, Tube: 3/4", A:24", B:22-1/2", C:2", D:1-1/4" Fastener: 5/16"-18 Nut, Stainless - 254609-1 - 354-2546091F1
Designed to provide a sleek, smooth handrail transition to the mounting surface of your boat. Functional and attractive, with no visible mounting hardware. Constructed of corrosion resistant formed 304 stainless steel also available in black matte finish. Installs with two 5/16"-18 nuts (included).
Sea-Dog 2546071 Stud Mount Handrail, Tube: 3/4", A: 18-1/2", B:16-3/4", C:2", D:1-1/4" Fastener: 5/16"-18 Nut, Stainless - 254607-1 - 354-2546071F1
Designed to provide a sleek, smooth handrail transition to the mounting surface of your boat. Functional and attractive, with no visible mounting hardware. Constructed of corrosion resistant formed 304 stainless steel also available in black matte finish. Installs with two 5/16"-18 nuts (included).
Sea-Dog 2546031 Stud Mount Handrail, Tube: 3/4", A:12", B:10-3/4", C: 2" D:1-1/4" Fastener: 5/16"-18 Nut, Stainless - 254603-1 - 354-2546031F1
Designed to provide a sleek, smooth handrail transition to the mounting surface of your boat. Functional and attractive, with no visible mounting hardware. Constructed of corrosion resistant formed 304 stainless steel also available in black matte finish. Installs with two 5/16"-18 nuts (included).
Sea-Dog 2546011 Stud Mount Handrail, Tube: 3/4", A: 8-3/4" B: 7-1/2" C: 1-3/4" D:1-1/4" , Fastener: 5/16"-18 Nut, Stainless - 254601-1 - 354-2546011F1
Designed to provide a sleek, smooth handrail transition to the mounting surface of your boat. Functional and attractive, with no visible mounting hardware. Constructed of corrosion resistant formed 304 stainless steel also available in black matte finish. Installs with two 5/16"-18 nuts (included).
Sea-Dog 232319 Replacement Control Knob (Black) - 232319-1 - 354-2323191F1
Replacement Control Knob
Sea-Dog 232318 Replacement Control Knob (Red) - 232318-1 - 354-2323181F1
Replacement Control Knob
Sea-Dog 232310 Dual Function Engine Control - 232310 - 354-232310F1
Sand Cast Brass Chrome Plated.
Sea-Dog 2243031 Push Button Rim Latch, Brushed Brass - 224303-1 - 354-2243031F1
Housings are constructed of plastic with a sturdy knob. Streamlined design features a positive action closure ensuring cabinets and drawers stay closed until the button is deliberately pushed again. Suitable for left side or right-side use. Mortise mount for a sleek, finished appearance. Latch installs with two #6 RH fasteners; strike plates require two #4 FH fasteners (fasteners not included).
Sea-Dog 2243011 Push Button Rim Latch, Polished Brass - 224301-1 - 354-2243011F1
Housings are constructed of plastic with a sturdy knob. Streamlined design features a positive action closure ensuring cabinets and drawers stay closed until the button is deliberately pushed again. Suitable for left side or right-side use. Mortise mount for a sleek, finished appearance. Latch installs with two #6 RH fasteners; strike plates require two #4 FH fasteners (fasteners not included). Packaged version includes both flat and 90° strike plates for inset or overlay mounting.
Sea-Dog 2243001 Push Button Rim Latch, Chrome Brass - 224300-1 - 354-2243001F1
Housings are constructed of plastic with a sturdy knob. Streamlined design features a positive action closure ensuring cabinets and drawers stay closed until the button is deliberately pushed again. Suitable for left side or right-side use. Mortise mount for a sleek, finished appearance. Latch installs with two #6 RH fasteners; strike plates require two #4 FH fasteners (fasteners not included). Packaged version includes both flat and 90° strike plates for inset or overlay mounting.
Sea-Dog 222503 Barrel Bolt, Chrome/Brass, 3" - 222503-1 - 354-2225031F1
Constructed of chrome plated extruded brass, these surface mounted barrel bolts provide additional security as either a primary or back-up locking system. Ideal for use on doors, gates and cabinets. They are appropriate for vertical, horizontal, left or right-hand applications. In vertical use notch in barrel holds bolt in locked position. Installs with six #6 FH fasteners (not included).
Sea-Dog 2225021 Barrel Bolt, Chrome/Brass, 2-1/2" - 222502-1 - 354-2225021F1
Constructed of chrome plated extruded brass, these surface mounted barrel bolts provide additional security as either a primary or back-up locking system. Ideal for use on doors, gates and cabinets. They are appropriate for vertical, horizontal, left or right-hand applications. In vertical use notch in barrel holds bolt in locked position. Installs with six #6 FH fasteners (not included).
Sea-Dog 2225011 Barrel Bolt, Chrome/Brass, 2" - 222501-1 - 354-2225011F1
Constructed of chrome plated extruded brass, these surface mounted barrel bolts provide additional security as either a primary or back-up locking system. Ideal for use on doors, gates and cabinets. They are appropriate for vertical, horizontal, left or right-hand applications. In vertical use notch in barrel holds bolt in locked position. Installs with six #6 FH fasteners (not included).
Sea-Dog 2225001 Barrel Bolt, Chrome/Brass, 1-1/2" - 222500-1 - 354-2225001F1
Constructed of chrome plated extruded brass, these surface mounted barrel bolts provide additional security as either a primary or back-up locking system. Ideal for use on doors, gates and cabinets. They are appropriate for vertical, horizontal, left or right-hand applications. In vertical use notch in barrel holds bolt in locked position. Installs with six #6 FH fasteners (not included).
Sea-Dog 2224661 Cast Brass Round Lift Ring, 2" Diameter. - 222466-1 - 354-2224661F1
Constructed of sand cast brass with a plain polished finish, these ring pulls are ideal for use on doors, cabinets, chests and drawers. Rings pivot out to open cabinets, etc. and lay flush when not in use for a clean appearance. Installs with three #8 FH fasteners (not included).
Sea-Dog 2224651 Chrome/Brass Round Lift Ring, 2" Diameter. - 222465-1 - 354-2224651F1
Constructed of sand cast brass with a chrome plated finish, these ring pulls are ideal for use on doors, cabinets, chests and drawers. Rings pivot out to open cabinets, etc. and lay flush when not in use for a clean appearance. Installs with three #8 FH fasteners (not included).
Sea-Dog 2224611 Cast Brass Round Lift Ring, 1-5/8" Diameter. - 222461-1 - 354-2224611F1
Constructed of sand cast brass with a plain polished finish, these ring pulls are ideal for use on doors, cabinets, chests and drawers. Rings pivot out to open cabinets, etc. and lay flush when not in use for a clean appearance. Installs with three #8 FH fasteners (not included).
Sea-Dog 2224601 Chrome/Brass Round Lift Ring, 1-5/8" Diameter. - 222460-1 - 354-2224601F1
Constructed of sand cast brass with a chrome plated finish, these ring pulls are ideal for use on doors, cabinets, chests and drawers. Rings pivot out to open cabinets, etc. and lay flush when not in use for a clean appearance. Installs with three #8 FH fasteners (not included).
Sea-Dog 2224101 Ring Pull, Chrome, A:2-1/2" , B:2", C:3/16", D:1/8", E:1-1/2", #8 Fh - 222410-1 - 354-2224101F1
Constructed of sand cast brass with a chrome plated finish, these ring pulls are ideal for use on doors, cabinets, chests and drawers. Rings pivot out to open cabinets, etc. and lay flush when not in use for a clean appearance. Installs with four #4 FH fasteners (not included).
Sea-Dog 2224001 Ring Pull, Chrome, A: 1-7/8", B:1-9/16", C:1/2", D:1/8", E: 1-1/8", #6 Fh - 222400-1 - 354-2224001F1
Constructed of sand cast brass with a chrome plated finish, these ring pulls are ideal for use on doors, cabinets, chests and drawers. Rings pivot out to open cabinets, etc. and lay flush when not in use for a clean appearance. Installs with four #4 FH fasteners (not included).
Sea-Dog 2223651 Door Button, #6 Fh, Brass, Weight= .13 A=1-3/16" , B=1/2" C=1", D=1-3/4", E= 1-11/16" - 222365-1 - 354-2223651F1
Sleek, simple and effective hardware solution to keep doors closed, spring loaded design keeps door in place. Constructed of cast brass with a plain polished finish. Surface mounts with three #6 FH fasteners (not included).
Sea-Dog 2223601 Door Stop Button, Chrome/Brass - 222360-1 - 354-2223601F1
A sleek, simple and effective hardware solution to keep doors closed. Door stop buttons surface mount easily with three #6 FH fasteners (not included). Cast brass w/chrome finish.
Sea-Dog 222121 Safety Hasp, , A:3", B:2-5/16", C:1", D: 3/4", E: 3/8", #6 Fh, Brass - 222121 - 354-222121F1
This hasp is designed with a slotted plate that fits over a fixed post. Prevents removal when used in conjunction with a padlock. For added security, all mounting screws are concealed when hasp is closed. Ideal for use on doors, cabinets, chests, and lockers. Constructed of sand cast brass with a chrome plated finish. Installs with six #6 FH fasteners (not included).
Sea-Dog 2221201 Safety Hasp, , A:3", B:2-5/16", C:1", D: 3/4", E: 3/8", #6 Fh, Chrome - 222120-1 - 354-2221201F1
This Hasp is designed with a slotted plate that fits over a fixed post. Prevents removal when used in conjunction with a padlock. For added security, all mounting screws are concealed when hasp is closed. Ideal for use on doors, cabinets, chests, and lockers. Constructed of sand cast brass with a chrome plated finish. Installs with six #6 FH fasteners (not included).
Sea-Dog 2221101 Anti-Rattle Fastener, Chrome/Brass, Carded, A: 4" B: 15/16" C: 1/4" D: 2", #10 Fh - 222110-1 - 354-2221101F1
Chrome plated sand cast brass. Anti-Rattle Latch features an open-mount, center-tensioning cam latch for a tight, no-rattle seal. Surface mounts easily with four #10 FH fasteners (not included). Ideal for cabinets, doors, and hatches. Latch also features a locking hole that will accept a padlock with up to a 1/4" diameter shank.
Sea-Dog 2220661 Decorative Door Hook, Brass, 3-1/2" - 222066-1 - 354-2220661F1
Constructed of sand cast brass with a plain polished finish these hook and eye style decorative door hooks are ideal for use on doors, gates, cabinets and shutters. Hooks allow additional security for doors and cabinets to lock in closed or open positions. Easy to install, simply surface mount with four #6 FH fasteners (not included).
Sea-Dog 2220651 Decorative Door Hook, Chrome/Brass, 3-1/2" - 222065-1 - 354-2220651F1
Constructed of sand cast brass with a chrome plated finish these hook and eye style decorative door hooks are ideal for use on doors, gates, cabinets and shutters. Hooks allow additional security for doors and cabinets to lock in closed or open positions. Easy to install, simply surface mount with four #6 FH fasteners (not included).
Sea-Dog 2220561 Decorative Door Hook, Brass, 2-1/2" - 222056-1 - 354-2220561F1
Constructed of sand cast brass with a plain polished finish these hook and eye style decorative door hooks are ideal for use on doors, gates, cabinets and shutters. Hooks allow additional security for doors and cabinets to lock in closed or open positions. Easy to install, simply surface mount with four #6 FH fasteners (not included).
Sea-Dog 222055 Decorative Door Hook, Chrome/Brass, 2-1/2" - 222055-1 - 354-2220551F1
Constructed of sand cast brass with a chrome plated finish these hook and eye style decorative door hooks are ideal for use on doors, gates, cabinets and shutters. Hooks allow additional security for doors and cabinets to lock in closed or open positions. Easy to install, simply surface mount with four #6 FH fasteners (not included).
Sea-Dog 2220511 Door Hook, 1-1/2" Brass - 222051-1 - 354-2220511F1
Constructed of sand cast brass with a plain polished finish these hook and eye style cabin door hooks are ideal for use on doors, gates, cabinets and shutters. Hooks allow additional security for doors and cabinets to lock in closed or open positions. Easy to install, simply surface mount with four #6 FH fasteners (not included).
Sea-Dog 2220501 Door Hook, 1-1/2" Chrome/Brass - 222050-1 - 354-2220501F1
Constructed of sand cast brass with a chrome plated finish these hook and eye style cabin door hooks are ideal for use on doors, gates, cabinets and shutters. Hooks allow additional security for doors and cabinets to lock in closed or open positions. Easy to install, simply surface mount with four #6 FH fasteners (not included).
Sea-Dog 221954 Large Round Hatch Handle Latch - 221954 - 354-221954F1
Investment cast 316 stainless steel construction for corrosion resistance and durability. This Large Round Hatch Handle Latch features a T-handle to engage the offset locking arm. Handle is recessed for a flush, clean installation. Requires a 3" size cut-out hole and installs with a back mounted stainless nut.
Sea-Dog 2218601 Flush Hatch Pull - 2218601 - 354-2218601F1
Constructed of corrosion resistant investment cast 316 stainless steel. These hatch pulls are ideal for use on doors, hatches, lazarettes, and dock boxes. Handle pivots out to open hatches and lays flush when not in use for a clean appearance. Installs with four #8 FH fasteners (not included).
Sea-Dog 2217501 Magnetic Doorstop, A: 1-13/16", B:9/16", C: 1-9/16"D:1-3/16", #10 Rh - 221750-1 - 354-2217501F1
The two-in-one Magnetic Door Stop design protects walls and holds the door open for you. Constructed of corrosion resistant 304 stainless steel. Can be mounted either vertically to the floor or horizontally to baseboard or wall. Powerful, hands-free magnet holds doors open. Installs with #10 RH fasteners (not included).
Sea-Dog 221155 Stainless Locking Hasp, 4-1/8" - 221155-1 - 354-2211551F1
Constructed of corrosion resistant stamped 304 stainless steel. These Locking Hasps are ideal for securing lockers, cupboards, chests, or hatch doors. Designed with a locking mechanism which requires the key to actuate preventing lock out. Functions as a conventional hasp when key is not in use. Installs with seven #8 FH fasteners (not included). For added security, all mounting screws are concealed when hasp is closed. Comes with two matching keys. Random key availability only from hasp to hasp.
Sea-Dog 2211501 Stainless Locking Hasp, 3-1/8" - 221150-1 - 354-2211501F1
Constructed of corrosion resistant stamped 304 stainless steel. These Locking Hasps are ideal for securing lockers, cupboards, chests, or hatch doors. Designed with a locking mechanism which requires the key to actuate preventing lock out. Functions as a conventional hasp when key is not in use. Installs with seven #8 FH fasteners (not included). For added security, all mounting screws are concealed when hasp is closed. Comes with two matching keys. Random key availability only from hasp to hasp.
Sea-Dog 221127 Heavy Duty Hasp, 2-11/16" - 221127-1 - 354-2211271F1
Corrosion resistant stamped 304 stainless steel. Ideal for securing lockers, cupboards, chests, or hatch doors. Designed with a slotted plate that fits over a fixed post, they are used in conjunction with a padlock to prevent removal when locked.
Sea-Dog 205420 Door Hinge, 4-1/8" X 1-1/2" - 205420-1 - 354-2054201F1
These door hinges are constructed of corrosion resistant investment cast 316 stainless steel for strength and durability. Installs with six #8 FH fasteners (not included).
Sea-Dog 2054101 Door Hinge, 3" X 1-1/2", 1 Pr. - 205410-1 - 354-2054101F1
These door hinges are constructed of corrosion resistant investment cast 316 stainless steel for strength and durability. Installs with six #8 FH fasteners (not included).
Sea-Dog 205290 Ladder Hinge - 205290 - 354-205290F1
Investment Cast 316 Stainless Steel.
Sea-Dog 205227 Heavy Duty Butt Hinge, 4-1/2"X 5-1/2" - 205227 - 354-205227F1
Integral nylon bearings for rattle-free, silent movement and smooth action. Commercial ANSI templated screw hole pattern. Investment Cast 316 Stainless Steel.
Sea-Dog 205225 Heavy Duty Butt Hinge, 4-1/2"X 4" - 205225 - 354-205225F1
Integral nylon bearings for rattle-free, silent movement and smooth action. Commercial ANSI templated screw hole pattern. Investment Cast 316 Stainless Steel.
Sea-Dog 2051421 Butt Hinge, 1 Pr., Carded - 205142-1 - 354-2051421F1
Corrosion resistant cast 316 stainless steel. Consisting of two rectangular leaves that attach to the abutting surfaces of a door and door jamb. Installs with four #10 FH fasteners (not included).
Sea-Dog 2051401 Butt Hinge, 1 Pr., Carded - 205140-1 - 354-2051401F1
Corrosion resistant cast 316 stainless steel. Consisting of two rectangular leaves that attach to the abutting surfaces of a door and door jamb. Installs with four #10 FH fasteners (not included).
Sea-Dog 2046211 Removable Pin Butt Hinges, Cast Brass - 204621-1 - 354-2046211F1
Consisting of two rectangular leaves that attach to the abutting surfaces of a door and door jamb these butt hinges are designed to be mortised in for a flush installation. Constructed of cast brass they feature a removable pin for applications where occasional removal may be required for easy stowing or cleaning. Installs with six #8 FH fasteners (not included).
Sea-Dog 204521L1 Brass Take Apart Hinge, Left, 2-3/4" Bulk - 204521L-1 - 354-204521L1F1
Allow a door or lid to be removed after installation without having to remove the fasteners Great for use on hatches, doors, dining table leaves, engine covers, chart tables, & ladders. Surface mounted, these cast brass hinges can be used horizontally or vertically. Installs with #6 FH fasteners (not included). Left side take apart butt hinge with 8 holes.
Sea-Dog 2045201 Chrome Brass Take Apart Hinge, Right, 2-3/4" 2/Card - 204520-1 - 354-2045201F1
Allow a door or lid to be removed after installation without having to remove the fasteners Great for use on hatches, doors, dining table leaves, engine covers, chart tables, & ladders. Surface mounted, these cast brass hinges can be used horizontally or vertically. Installs with #6 FH fasteners (not included). Right side take apart butt hinge with 8 holes.
Sea-Dog 204516L1 Brass Take Apart Hinge, Left, 2" Bulk - 204516L-1 - 354-204516L1F1
Allow a door or lid to be removed after installation without having to remove the fasteners Great for use on hatches, doors, dining table leaves, engine covers, chart tables, & ladders. Surface mounted, these cast brass hinges can be used horizontally or vertically. Installs with #6 FH fasteners (not included). Left side take apart hinge w/6 holes.
Sea-Dog 2045151 Chrome Brass Take Apart Hinge, Right, 2" 2/Card - 204515-1 - 354-2045151F1
Allow a door or lid to be removed after installation without having to remove the fasteners Great for use on hatches, doors, dining table leaves, engine covers, chart tables, & ladders. Surface mounted, these cast brass hinges can be used horizontally or vertically. Installs with #6 FH fasteners (not included). Right side take apart hinge w/6 holes.
Sea-Dog 2045101 Chrome Brass Take Apart Hinge, Right, 1-1/2" 2/Card - 204510-1 - 354-2045101F1
Allow a door or lid to be removed after installation without having to remove the fasteners Great for use on hatches, doors, dining table leaves, engine covers, chart tables, & ladders. Surface mounted, these cast brass hinges can be used horizontally or vertically. Installs with #6 FH fasteners (not included). Right side take apart hinge w/4 holes.
Sea-Dog 2035301 Dampening Door Hinge, #8 Fh, Weight= .11/ .22 A= 2-7/8" , B=1-7/16", C=1-7/16" D=1-1/2", E=1/16" - 203530-1 - 354-2035301F1
Consist of two leaves with a Teflon coated pin that produces a very precise, low friction movement for a very high end feel with anti-rattle properties, great for interior and exterior applications such as cabinets, hatches, folding tables, or seats where mounting space is tight. Constructed of corrosion resistant stamped 304 stainless steel. Installs with six #8 FH fasteners (not included).
Sea-Dog 202531 Door Hinge, White Nylon, Bulk - 202531 Bulk - 354-202531F1
These Door Hinges are constructed of UV resistant, injection molded fiberglass nylon with a corrosion resistant stainless steel pin. Installs with six #8 FH fasteners (not included).
Sea-Dog 2025301 Door Hinge, Black Nylon, 2/Cd - 202530-1 - 354-2025301F1
These Door Hinges are constructed of UV resistant, injection molded fiberglass nylon with a corrosion resistant stainless steel pin. Installs with six #8 FH fasteners (not included).
Sea-Dog 2025111 Short Side Door Hinge, White Pr. - 202511-1 - 354-2025111F1
Glass-filled, injection molded nylon hinges feature a stainless steel pin and are practically indestructible. UV and corrosion resistant they are economical too. Installs with five #8 FH fasteners (not included).
Sea-Dog 2025101 Short Side Door Hinge, Black Pr. - 202510-1 - 354-2025101F1
Glass-filled, injection molded nylon hinges feature a stainless steel pin and are practically indestructible. UV and corrosion resistant they are economical too. Installs with five #8 FH fasteners (not included).
Sea-Dog 2018011 Locker Hinge, 2-7/8", Carded - 201801-1 - 354-2018011F1
Heavy duty hinges constructed of corrosion resistant, stamped 304 stainless steel to withstand the harsh marine environment. Installs with FH fasteners (not included).
Sea-Dog 2018001 Locker Hinge, 2-7/8", Carded - 201800-1 - 354-2018001F1
Heavy duty hinges constructed of corrosion resistant, stamped 304 stainless steel to withstand the harsh marine environment. Installs with FH fasteners (not included).
Sea-Dog 2017251 Flush Mount Round Side Door Hinge - 201725-1 - 354-2017251F1
Stamped 304 Stainless Steel.
Sea-Dog 2017201 Round Side Door Hinge - Long - 201720-1 - 354-2017201F1
Stamped 304 Stainless Steel.
Sea-Dog 201710 Round Side Door Hinge - Medium - 201710-1 - 354-2017101F1
Stamped 304 Stainless Steel.
Sea-Dog 2015901 Offset Butt Hinges, Stainless, 1 Pr. - 201590-1 - 354-2015901F1
Designed to be mounted on the front surface of a raised door. Constructed of corrosion resistant, stamped 304 stainless steel with countersunk holes. Installs with four #8 FH fasteners (not included).
Sea-Dog 201586 Take-Apart Hinges, Left - 201586 - 354-201586F1
Stamped 304 Stainless Steel.
Sea-Dog 201585 Take-Apart Hinges, Right - 201585 - 354-201585F1
Stamped 304 Stainless Steel.
Sea-Dog 2015701 Stainless Offset Short Side Hinge, 2/Pk - 201570-1 - 354-2015701F1
Constructed of corrosion resistant 304 stamped stainless steel, these Short Side Offset Door Hinges are designed to allow more open access by moving the pivot point of the door further away from the hinge. This simple solution provides extra clearance while avoiding the need to create a larger opening by installing a new door frame. Surface mounted on the front side of a raised door, they are used where the hinge does not need to be concealed. Installs with five #8 FH fasteners (not included).
Sea-Dog 201555 Round Side Two Pin Hinge, 3" (Carded) - 201555-1 - 354-2015551F1
Constructed of heavy duty 304 stainless steel. Opens 180°, making them ideal for folding tables or doors that must fold back flat. Good for use in tight spaces. Corrosion resistant to withstand the harsh marine environment. Installs with #8 FH fasteners (not included).
Sea-Dog 2015511 Stainless Flush 2-Pin Hinge - 201551-1 - 354-2015511F1
Constructed of heavy duty 304 stainless steel. Opens 180°, making them ideal for folding tables or doors that must fold back flat. Corrosion resistant to withstand the harsh marine environment. Installs with six #8 FH fasteners (not included).
Sea-Dog 201535 Flush Door Hinge - 201535-1 - 354-2015351F1
Stamped 304 Stainless Steel.
Sea-Dog 2015101 Stainless Door Hinge Short Side Door Hinge #8, 2/Cd - 201510-1 - 354-2015101F1
Stamped 304 stainless steel. #8 fastener.
Sea-Dog 2010811 Butt Hinges, A: 3" B: 1-1/2", C: 1-1/2" D:3" E: 1/16", #8 Fh - 201081-1 - 354-2010811F1
Consisting of two rectangular leaves that attach to the abutting surfaces of a door and door jamb these butt hinges are designed to be mortised in for a flush installation. Constructed of corrosion resistant stainless steel they install with six #8 FH fasteners (not included).
Sea-Dog 201081 Stainless Butt Hinge, A: 3" B: 1-1/2", C: 1-1/2" D:3" E: 1/16", #8 Fh - 201081-1 - 354-201081F1
Stamped 304 stainless steel. #8FH Fastener.
Sea-Dog 2010801 Stainless Butt Hinge, A: 2" B:1" C:1", D:3" E: 1/16", #8 Fh - 201080-1 - 354-2010801F1
Stamped 304 stainless steel. #8FH Fastener.
Sea-Dog 2010721 Stainless Butt Hinge, 2" X 2" - 201072-1 - 354-2010721F1
Consisting of two rectangular leaves that attach to the abutting surfaces of a door and door jamb, these butt hinges are designed to be mortised in for a flush installation. Constructed of corrosion resistant stainless steel they will withstand the harsh marine environment. Installs with four #8 FH fasteners (not included).
Sea-Dog 2010711 Stainless Butt Hinge, 1-1/2" X 1-2" - 201071-1 - 354-2010711F1
Consisting of two rectangular leaves that attach to the abutting surfaces of a door and door jamb, these butt hinges are designed to be mortised in for a flush installation. Constructed of corrosion resistant stainless steel they will withstand the harsh marine environment. Installs with four #8 FH fasteners (not included).
Sea-Dog 2010701 Stainless Butt Hinge, 1-1/4" X 1-1/2" - 201070-1 - 354-2010701F1
Consisting of two rectangular leaves that attach to the abutting surfaces of a door and door jamb, these butt hinges are designed to be mortised in for a flush installation. Constructed of corrosion resistant stainless steel they will withstand the harsh marine environment. Installs with four #8 FH fasteners (not included).
Sea-Dog 2010201 Stainless Door Hinge Short Side Door Hinge #8, 2/Cd - 201020-1 - 354-2010201F1
These stamped 304 stainless steel short side hinges are corrosion resistant. Great for all interior and exterior applications such as cabinets, hatches, folding tables or seats where mounting space is tight. Installs with five #8 FH fasteners (not included).
Sea-Dog 195320 Reefing Hook - 195320-1 - 354-1953201F1
Formed 304 Stainless Steel.
Sea-Dog 195310 Reefing Hook - 195310-1 - 354-1953101F1
Formed 304 Stainless Steel.
Sea-Dog 195210 Sail Lashing Hook - 195210-1 - 354-1952101F1
Formed 304 Stainless Steel.
Sea-Dog 195110 Cunningham Hook - 195110-1 - 354-1951101F1
Formed 304 Stainless Steel.
Sea-Dog 1935641 Split Ring 3/4" Ss 3/Cd - 193564-1 - 354-1935641F1
Stainless 316 wire.
Sea-Dog 1935631 Split Ring 5/8" Ss 4/Cd - 193563-1 - 354-1935631F1
Stainless 316 wire.
Sea-Dog 1935621 Split Ring 15/32" Ss 4/Cd - 193562-1 - 354-1935621F1
Stainless 316 wire.
Sea-Dog 193561 Split Ring 11/32" Ss, Bulk - 193561 - 354-193561F1
Stainless 316 wire.
Sea-Dog 192950 Galvanized Ring 5/8" X 5" - 192950 - 354-192950F1
Formed hot dipped galvanized. Bulk.
Sea-Dog 192940 Galvanized Ring 5/8" X 4" - 192940 - 354-192940F1
Formed hot dipped galvanized. Bulk.
Sea-Dog 192840 Galvanized Ring 1/2" X 4" - 192840 - 354-192840F1
Formed hot dipped galvanized. Bulk.
Sea-Dog 192830 Galvanized Ring 1/2" X 3" - 192830 - 354-192830F1
Formed hot dipped galvanized. Bulk.
Sea-Dog 192630 Galvanized Ring - 3/8" X 3" - 192630 - 354-192630F1
Formed hot dipped galvanized. Bulk.
Sea-Dog 192420 Galvanized Ring, 1/4" X 2" - 192420 - 354-192420F1
Formed hot dipped galvanized. Bulk.
Sea-Dog 192415 Galvanized Ring, 1/4" X 1-1/2" - 192415 - 354-192415F1
Formed hot dipped galvanized. Bulk.
Sea-Dog 190579 Round Ring - 1" White - 190579 - 354-190579F1
Injection molded nylon.
Sea-Dog 190571 Round Ring - 1-1/2" White - 190571 - 354-190571F1
Injection molded nylon.
Sea-Dog 190570 Round Ring - 2" White - 190570 - 354-190570F1
Injection molded nylon.
Sea-Dog 189705 Lifeline Pelican Hook - 189705 - 354-189705F1
Lifeline pelican hooks open with a pull of the quick release plunger then close automatically when pressed shut. Capable of being released under load these hooks are used as a removable fastener in lifeline applications where a gate is required. Constructed of investment cast 316 stainless steel for maximum corrosion resistance and durability
Sea-Dog 189700 Lifeline Pelican Hook - 189700 - 354-189700F1
Lifeline pelican hooks open with a pull of the quick release plunger then close automatically when pressed shut. Capable of being released under load these hooks are used as a removable fastener in lifeline applications where a gate is required. Constructed of investment cast 316 stainless steel for maximum corrosion resistance and durability
Sea-Dog 186131 Jaw & Jaw Turnbuckle, A:1/2"-20, B:12-1/2", C:18-1/2", D:3/8", E:5/8" - 186131 - 354-186131F1
Used for adjusting the tension and/or length of ropes and cables. Constructed of hot dipped galvanized forged steel for corrosion resistance. End fittings should be checked to ensure uninhibited universal movement.
Sea-Dog 185116 Jaw & Jaw Turnbuckle - 185116 - 354-185116F1
Made from AISI 316 stainless steel with an electropolished bright finish. All thread sizes and wire rope sizes now conform to U.S. standards and are interchangeable with most other U.S. manufacturers.
Sea-Dog 185112 Jaw & Jaw Turnbuckle - 185112 - 354-185112F1
Made from AISI 316 stainless steel with an electropolished bright finish. All thread sizes and wire rope sizes now conform to U.S. standards and are interchangeable with most other U.S. manufacturers.
Sea-Dog 185108 Jaw & Jaw Turnbuckle - 185108 - 354-185108F1
Made from AISI 316 stainless steel with an electropolished bright finish. All thread sizes and wire rope sizes now conform to U.S. standards and are interchangeable with most other U.S. manufacturers.
Sea-Dog 185106 Jaw & Jaw Turnbuckle - 185106 - 354-185106F1
Made from AISI 316 stainless steel with an electropolished bright finish. All thread sizes and wire rope sizes now conform to U.S. standards and are interchangeable with most other U.S. manufacturers.
Sea-Dog 181216 Galvanized Jaw & Eye Swivel, 5/8", Bulk - 181216 - 354-181216F1
Swivels link together two parts that have separate rotational directions reducing knotting or twisting and relieving stress. Constructed of hot dipped galvanized stamped steel these eye to jaw swivels are ideal for anchor to chain connections. The swivel action also facilitates anchor set by allowing the anchor to rotate freely and dig in to set more quickly.
Sea-Dog 1812121 Galvanized Jaw & Eye Swivel, 1/2", Carded - 181212-1 - 354-1812121F1
Swivels link together two parts that have separate rotational directions reducing knotting or twisting and relieving stress. Constructed of hot dipped galvanized stamped steel these eye to jaw swivels are ideal for anchor to chain connections. The swivel action also facilitates anchor set by allowing the anchor to rotate freely and dig in to set more quickly.
Sea-Dog 1812101 Galvanized Jaw & Eye Swivel, 3/8", Carded - 181210-1 - 354-1812101F1
Swivels link together two parts that have separate rotational directions reducing knotting or twisting and relieving stress. Constructed of hot dipped galvanized stamped steel these eye to jaw swivels are ideal for anchor to chain connections. The swivel action also facilitates anchor set by allowing the anchor to rotate freely and dig in to set more quickly.
Sea-Dog 181210 Galvanized Jaw & Eye Swivel, 3/8", Bulk - 181210 - 354-181210F1
Swivels link together two parts that have separate rotational directions reducing knotting or twisting and relieving stress. Constructed of hot dipped galvanized stamped steel these eye to jaw swivels are ideal for anchor to chain connections. The swivel action also facilitates anchor set by allowing the anchor to rotate freely and dig in to set more quickly.
Sea-Dog 181208 Galvanized Jaw & Eye Swivel, 5/16", Bulk - 181208 - 354-181208F1
Swivels link together two parts that have separate rotational directions reducing knotting or twisting and relieving stress. Constructed of hot dipped galvanized stamped steel these eye to jaw swivels are ideal for anchor to chain connections. The swivel action also facilitates anchor set by allowing the anchor to rotate freely and dig in to set more quickly.
Sea-Dog 173577 Standard Thimble, Black Nylon, 3/4" - 173577 - 354-173577F1
Used to protect rope from contacting with the load it is hoisting, thimbles keep the eye splice from being crushed while reducing chafe and abrasion. Constructed of injection molded nylon these thimbles are ideal for floating rope, pennants and general rigging. Thimble size should match rope size.
Sea-Dog 173574 Standard Thimble, Black Nylon, 1/2" - 173574 - 354-173574F1
Used to protect rope from contacting with the load it is hoisting, thimbles keep the eye splice from being crushed while reducing chafe and abrasion. Constructed of injection molded nylon these thimbles are ideal for floating rope, pennants and general rigging. Thimble size should match rope size.
Sea-Dog 173573 Standard Thimble, Black Nylon, 3/8" - 173573 - 354-173573F1
Used to protect rope from contacting with the load it is hoisting, thimbles keep the eye splice from being crushed while reducing chafe and abrasion. Constructed of injection molded nylon these thimbles are ideal for floating rope, pennants and general rigging. Thimble size should match rope size.
Sea-Dog 173571 Standard Thimble, Black Nylon, 1/4" - 173571 - 354-173571F1
Used to protect rope from contacting with the load it is hoisting, thimbles keep the eye splice from being crushed while reducing chafe and abrasion. Constructed of injection molded nylon these thimbles are ideal for floating rope, pennants and general rigging. Thimble size should match rope size.
Sea-Dog 173559 Standard Thimble, White Nylon, 1" - 173559 - 354-173559F1
Used to protect rope from contacting with the load it is hoisting, thimbles keep the eye splice from being crushed while reducing chafe and abrasion. Constructed of injection molded nylon these thimbles are ideal for floating rope, pennants and general rigging. Thimble size should match rope size.
Sea-Dog 173557 Standard Thimble, White Nylon, 3/4" - 173557 - 354-173557F1
Used to protect rope from contacting with the load it is hoisting, thimbles keep the eye splice from being crushed while reducing chafe and abrasion. Constructed of injection molded nylon these thimbles are ideal for floating rope, pennants and general rigging. Thimble size should match rope size.
Sea-Dog 173556 Standard Thimble, White Nylon, 5/8" - 173556 - 354-173556F1
Used to protect rope from contacting with the load it is hoisting, thimbles keep the eye splice from being crushed while reducing chafe and abrasion. Constructed of injection molded nylon these thimbles are ideal for floating rope, pennants and general rigging. Thimble size should match rope size.
Sea-Dog 173554 Standard Thimble, White Nylon, 1/2" - 173554 - 354-173554F1
Used to protect rope from contacting with the load it is hoisting, thimbles keep the eye splice from being crushed while reducing chafe and abrasion. Constructed of injection molded nylon these thimbles are ideal for floating rope, pennants and general rigging. Thimble size should match rope size.
Sea-Dog 173553 Standard Thimble, White Nylon, 3/8" - 173553 - 354-173553F1
Used to protect rope from contacting with the load it is hoisting, thimbles keep the eye splice from being crushed while reducing chafe and abrasion. Constructed of injection molded nylon these thimbles are ideal for floating rope, pennants and general rigging. Thimble size should match rope size.
Sea-Dog 173552 Standard Thimble, White Nylon, 5/16" - 173552 - 354-173552F1
Used to protect rope from contacting with the load it is hoisting, thimbles keep the eye splice from being crushed while reducing chafe and abrasion. Constructed of injection molded nylon these thimbles are ideal for floating rope, pennants and general rigging. Thimble size should match rope size.
Sea-Dog 173551 Standard Thimble, White Nylon, 1/4" - 173551 - 354-173551F1
Used to protect rope from contacting with the load it is hoisting, thimbles keep the eye splice from being crushed while reducing chafe and abrasion. Constructed of injection molded nylon these thimbles are ideal for floating rope, pennants and general rigging. Thimble size should match rope size.
Sea-Dog 1537101 Quick Link, Stainless, 3/8" X 3-1/2" - 153710-1 - 354-1537101F1
Reusable and removable, quick links feature two-sided thread links designed for fast, easy connections between 2 lengths of chain or for attaching accessories to chain. Hex shaped bolt for easy opening. Constructed of formed 304 stainless steel for durability and corrosion resistance. Ideal for chain repair, hammocks, and gates.
Sea-Dog 1537081 Quick Link, Stainless, 5/16" X 2-15/16" - 153708-1 - 354-1537081F1
Reusable and removable, quick links feature two-sided thread links designed for fast, easy connections between 2 lengths of chain or for attaching accessories to chain. Hex shaped bolt for easy opening. Constructed of formed 304 stainless steel for durability and corrosion resistance. Ideal for chain repair, hammocks, and gates.
Sea-Dog 1537061 Quick Link, Stainless, 1/4" X 2-1/4" - 153706-1 - 354-1537061F1
Reusable and removable, quick links feature two-sided thread links designed for fast, easy connections between 2 lengths of chain or for attaching accessories to chain. Hex shaped bolt for easy opening. Constructed of formed 304 stainless steel for durability and corrosion resistance. Ideal for chain repair, hammocks, and gates.
Sea-Dog 1537051 Quick Link, Stainless, 3/16" X 2-1/16" - 153705-1 - 354-1537051F1
Reusable and removable, quick links feature two-sided thread links designed for fast, easy connections between 2 lengths of chain or for attaching accessories to chain. Hex shaped bolt for easy opening. Constructed of formed 304 stainless steel for durability and corrosion resistance. Ideal for chain repair, hammocks, and gates.
Sea-Dog 153012 Quick Link 4-1/8" Stainless - 153012 - 354-153012F1
Reusable and removable, quick links feature two-sided thread links designed for fast, easy connections between 2 lengths of chain or for attaching accessories to chain. Hex shaped bolt for easy opening. Constructed of formed 316 stainless steel for strength, durability and corrosion resistance. Ideal for chain repair, hammocks, and gates.
Sea-Dog 1530061 Quick Link 2-1/4" Stainless - 153006-1 - 354-1530061F1
Reusable and removable, quick links feature two-sided thread links designed for fast, easy connections between 2 lengths of chain or for attaching accessories to chain. Hex shaped bolt for easy opening. Constructed of formed 316 stainless steel for strength, durability and corrosion resistance. Ideal for chain repair, hammocks, and gates.
Sea-Dog 1530051 Quick Link 1-15/16" Stainless - 153005-1 - 354-1530051F1
Reusable and removable, quick links feature two-sided thread links designed for fast, easy connections between 2 lengths of chain or for attaching accessories to chain. Hex shaped bolt for easy opening. Constructed of formed 316 stainless steel for strength, durability and corrosion resistance. Ideal for chain repair, hammocks, and gates.
Sea-Dog 152080 Snap Link, 3-3/16" - 152080 - 354-152080F1
High strength Snap Link for use in multiple applications. Formed 316 stainless steel.
Sea-Dog 151125 Snap Hook With Eye Insert, 4-3/4", Bulk - 151125 - 354-151125F1
This snap hook with eye provides secure attachment to lines for use on safety harnesses, fishing lines, mooring buoy lines, etc. Formed 316 Stainless Steel. Bulk.
Sea-Dog 151105 Snap Hook With Eye Insert, 4", Bulk - 151105 - 354-151105F1
This snap hook with eye provides secure attachment to lines for use on safety harnesses, fishing lines, mooring buoy lines, etc. Formed 316 Stainless Steel. Bulk.
Sea-Dog 151085 Snap Hook With Eye Insert, 3-1/8", Bulk - 151085 - 354-151085F1
This snap hook with eye provides secure attachment to lines for use on safety harnesses, fishing lines, mooring buoy lines, etc. Formed 316 Stainless Steel. Bulk.
Sea-Dog 151065 Snap Hook With Eye Insert, 2-3/8", Bulk - 151065 - 354-151065F1
This snap hook with eye provides secure attachment to lines for use on safety harnesses, fishing lines, mooring buoy lines, etc. Formed 316 Stainless Steel. Bulk.
Sea-Dog 1501251 Asymmetrical Snap W/Eye Insert - Stainless, 4-3/4" - 150125-1 - 354-1501251F1
Designed to place more of the load on the stronger, non-gate side which significantly increases the breaking strength over traditional rounded style snap hooks. The offset body style allows greater gate clearance, increasing the passage area into the snap. The eye insert provides a secure attachment to lines for use on harnesses, fishing lines, mooring buoy lines, etc. Formed 316 stainless steel.
Sea-Dog 1501201 Asymmetrical Snap Hook, A:7/16" , B:4-3/4", C:13/16", D:15/16",B.S:2,160 Lbs. - 150120-1 - 354-1501201F1
Formed 316 Stainless Steel. The Asymmetrical style snap provides approximately a 50% increase in the breaking strength over the traditional style snap hook. The offset body style also allows a greater opening increasing the passage area into the snap.
Sea-Dog 150105 Asymmetrical Snap W/Eye Insert - Stainless, 4" - 150105-1 - 354-1501051F1
Designed to place more of the load on the stronger, non-gate side which significantly increases the breaking strength over traditional rounded style snap hooks. The offset body style allows greater gate clearance, increasing the passage area into the snap. The eye insert provides a secure attachment to lines for use on harnesses, fishing lines, mooring buoy lines, etc. Formed 316 stainless steel.
Sea-Dog 1501001 Fillet & Prep Table Round Rail Mount,, A:3/8", B:4", C:5/8", D:3/4", B.S: 1604 Lbs. - 150100-1 - 354-1501001F1
Formed 316 Stainless Steel. The Asymmetrical style snap provides approximately a 50% increase in the breaking strength over the traditional style snap hook. The offset body style also allows a greater opening increasing the passage area into the snap.
Sea-Dog 1500851 Asymmetrical Snap W/Eye Insert - Stainless, 3-1/4"" - 150085-1 - 354-1500851F1
Designed to place more of the load on the stronger, non-gate side which significantly increases the breaking strength over traditional rounded style snap hooks. The offset body style allows greater gate clearance, increasing the passage area into the snap. The eye insert provides a secure attachment to lines for use on harnesses, fishing lines, mooring buoy lines, etc. Formed 316 stainless steel.
Sea-Dog 150080 Asymmetrical Snap Hook, , A:5/16" , B:3-1/4", C:1/2", D:1/2", B.S:1119 Lbs. - 150080-1 - 354-150080F1
Formed 316 Stainless Steel. The Asymmetrical style snap provides approximately a 50% increase in the breaking strength over the traditional style snap hook. The offset body style also allows a greater opening increasing the passage area into the snap.
Sea-Dog 150065 Asymmetrical Snap W/Eye Insert - Stainless, 2-3/8" - 150065-1 - 354-1500651F1
Designed to place more of the load on the stronger, non-gate side which significantly increases the breaking strength over traditional rounded style snap hooks. The offset body style allows greater gate clearance, increasing the passage area into the snap. The eye insert provides a secure attachment to lines for use on harnesses, fishing lines, mooring buoy lines, etc. Formed 316 stainless steel.
Sea-Dog 150060 Asymmetrical Snap Hook,, A:1/4", B:2-3/8", C:5/16", D:7/16" B.S:600 Lbs. - 150060-1 - 354-1500601F1
Formed 316 Stainless Steel. The Asymmetrical style snap provides approximately a 50% increase in the breaking strength over the traditional style snap hook. The offset body style also allows a greater opening increasing the passage area into the snap.
Sea-Dog 147612 Galvanized Shackle-Load Rated, A: 5/8", B:13/16", C:1-1/4", D: 1-13/16" Max Load: 2 Ton - 147612 - 354-147612F1
With their rounded shape bow shackles are designed to handle many different types of load from any direction. Constructed of hot dip galvanized drop forged steel these shackles feature a screw pin closure and are ideal for joining anchors to mooring chain. These Screw Pin Anchor Shackles are forged to comply with Federal Spec. RR-C-271b and are load rated.
Sea-Dog 147611 Galvanized Shackle-Load Rated, , A:1/2" , B:11/16", C: 1-1/8", D: 1-11/16", Max Load: 1-1/2 Ton - 147611 - 354-147611F1
With their rounded shape bow shackles are designed to handle many different types of load from any direction. Constructed of hot dip galvanized drop forged steel these shackles feature a screw pin closure and are ideal for joining anchors to mooring chain. These Screw Pin Anchor Shackles are forged to comply with Federal Spec. RR-C-271b and are load rated.
Sea-Dog 147610 Galvanized Shackle-Load Rated, , A:7/16", B:11/16", C:1", D:1-7/16", Max Load: 1 Ton - 147610 - 354-147610F1
With their rounded shape bow shackles are designed to handle many different types of load from any direction. Constructed of hot dip galvanized drop forged steel these shackles feature a screw pin closure and are ideal for joining anchors to mooring chain. These Screw Pin Anchor Shackles are forged to comply with Federal Spec. RR-C-271b and are load rated.
Sea-Dog 147608 Galvanized Shackle-Load Rated, A: 3/8", B:1/2", C:13/16", D:1-3/16", Max Load: 3/4 Ton - 147608 - 354-147608F1
With their rounded shape bow shackles are designed to handle many different types of load from any direction. Constructed of hot dip galvanized drop forged steel these shackles feature a screw pin closure and are ideal for joining anchors to mooring chain. These Screw Pin Anchor Shackles are forged to comply with Federal Spec. RR-C-271b and are load rated.
Sea-Dog 147606 Galvanized Shackle-Load Rated, , A:5/16" , B:9/16", C:13/16", D:1-1/8", Max Load: 1/2" Ton - 147606 - 354-147606F1
With their rounded shape bow shackles are designed to handle many different types of load from any direction. Constructed of hot dip galvanized drop forged steel these shackles feature a screw pin closure and are ideal for joining anchors to mooring chain. These Screw Pin Anchor Shackles are forged to comply with Federal Spec. RR-C-271b and are load rated.
Sea-Dog 147410 Twisted D-Shackle, 3/8" - 147410-1 - 354-1474101F1
Forged 316 Stainless Steel.
Sea-Dog 1474081 Twisted D-Shackle, 5/16" - 147408-1 - 354-1474081F1
Forged 316 Stainless Steel.
Sea-Dog 1474061 Twisted D-Shackle, 1/4" - 147406-1 - 354-1474061F1
Forged 316 Stainless Steel.
Sea-Dog 1472301 Stainless Captive Bow Shackle, 3/8", Card - 147230-1 - 354-1472301F1
With their rounded shape, bow shackles are designed to handle many different types of load from any direction. Constructed of forged 316 stainless, these shackles feature a captive pin closure. When open the pin completely clears the opening of the shackle and is recessed into a secured flush position. The pin remains captive and will not fall out, no risk of loss due to vibration. With other shackles, the pin is not flush until you partially unscrew it. Ideal for rigging applications where single-handed operation is required.
Sea-Dog 147228 Stainless Captive Bow Shackle, 5/16", Bulk - 147228 - 354-147228F1
With their rounded shape, bow shackles are designed to handle many different types of load from any direction. Constructed of forged 316 stainless, these shackles feature a captive pin closure. When open the pin completely clears the opening of the shackle and is recessed into a secured flush position. The pin remains captive and will not fall out, no risk of loss due to vibration. With other shackles, the pin is not flush until you partially unscrew it. Ideal for rigging applications where single-handed operation is required.
Sea-Dog 1472231 Stainless Captive Bow Shackle, 5/32", Card - 147223-1 - 354-1472231F1
With their rounded shape, bow shackles are designed to handle many different types of load from any direction. Constructed of forged 316 stainless, these shackles feature a captive pin closure. When open the pin completely clears the opening of the shackle and is recessed into a secured flush position. The pin remains captive and will not fall out, no risk of loss due to vibration. With other shackles, the pin is not flush until you partially unscrew it. Ideal for rigging applications where single-handed operation is required.
Sea-Dog 147160 Long D-Shackle, A: 3/8", B:13/16", C:3", B.S: 9900 Lbs. - 147160-1 - 354-1471601F1
Designed for rigging applications with bi-directional loads, long D-ring shackles feature a proportionally longer length to offer a high strength to weight ratio. Constructed of forged 316 stainless these shackles feature a screw pin closure. Because the screw pin can be quickly removed from the shackle body they are ideal for rigging applications where fast and/or repeated connecting and disconnecting are required.
Sea-Dog 1471581 Long D-Shackle , A: 5/16" B: 11/16" C: 2-3/8" B.S: 6,600 Lbs. - 147158-1 - 354-1471581F1
Designed for rigging applications with bi-directional loads long D-ring shackles feature a proportionally longer length to offer a high strength to weight ratio. Constructed of forged 316 stainless these shackles feature a screw pin closure. Because the screw pin can be quickly removed from the shackle body they are ideal for rigging applications where fast and/or repeated connecting and disconnecting are required.
Sea-Dog 1471561 Long D-Shackle, A:1/4", B:1/2", C:1-3/4", B.S: 3,300 Lbs. - 147156-1 - 354-1471561F1
Designed for rigging applications with bi-directional loads, long D-ring shackles feature a proportionally longer length to offer a high strength to weight ratio. Constructed of forged 316 stainless these shackles feature a screw pin closure. Because the screw pin can be quickly removed from the shackle body they are ideal for rigging applications where fast and/or repeated connecting and disconnecting are required.
Sea-Dog 147154 Long D-Shackle, A:3/16" , B:3/8", C: 1-1/2", B.S: 2200 Lbs. - 147154-1 - 354-1471541F1
Designed for rigging applications with bi-directional loads, long D-ring shackles feature a proportionally longer length to offer a high strength to weight ratio. Constructed of forged 316 stainless these shackles feature a screw pin closure. Because the screw pin can be quickly removed from the shackle body they are ideal for rigging applications where fast and/or repeated connecting and disconnecting are required.
Sea-Dog 1471531 Long D-Shackle, A:5/32" , B: 5/16", C:1-3/16" , B.S:1,540 Lbs. - 147153-1 - 354-1471531F1
Designed for rigging applications with bi-directional loads, long D-ring shackles feature a proportionally longer length to offer a high strength to weight ratio. Constructed of forged 316 stainless these shackles feature a screw pin closure. Because the screw pin can be quickly removed from the shackle body they are ideal for rigging applications where fast and/or repeated connecting and disconnecting are required.
Sea-Dog 1461321 Swivel Eye Boat Snap, 3-7/8" Stainless - 146132-1 - 354-1461321F1
This swivel eye boat snap features a spring-loaded latch for easy attachment. Constructed of investment cast 316 stainless steel for corrosion resistance and durability they are designed for medium duty lifting and rigging applications. 360° swivel eye eliminates tangling.
Sea-Dog 1461311 Swivel Eye Boat Snap, 3-5/16" Stainless - 146131-1 - 354-1461311F1
This swivel eye boat snap features a spring-loaded latch for easy attachment. Constructed of investment cast 316 stainless steel for corrosion resistance and durability they are designed for medium duty lifting and rigging applications. 360° swivel eye eliminates tangling.
Sea-Dog 146048 Trigger Snap - Stainless - 146048-1 - 354-1460481F1
Trigger snaps feature an extra secure hinged snap hook that closes tighter under load. Constructed of investment cast 316 stainless steel for durability. Spring-loaded bolts provide secure closure with the advantage of an easy-open thumb lever. 360° swivel strap eye eliminates tangling.
Sea-Dog 143660 Fixed Eye Snap Shackle - 143660 - 354-143660F1
Investment Cast 316 Stainless Steel.
Sea-Dog 143520 Fixed Eye Snap Shackle - 143520 - 354-143520F1
Investment Cast 316 Stainless Steel.
Sea-Dog 142902 Toggle Snap Shackle - 142902 - 354-142902F1
Investment Cast 316 Stainless Steel.
Sea-Dog 142900 Swivel Eye Snap Shackle - 142900 - 354-142900F1
Investment Cast 316 Stainless Steel.
Sea-Dog 142700 Swivel Eye Snap Shackle - 142700 - 354-142700F1
Investment Cast 316 Stainless Steel.
Sea-Dog 140207 Key Pin D-Shackle, 1/4" - 140207 - 354-140207F1
Stamped 304 Stainless.
Sea-Dog 140152 Sailmaker D-Shackle, 3/16" - 140152 - 354-140152F1
Stamped 304 Stainless Steel.
Sea-Dog 140141 Sailmaker D-Shackle, 5/32" - 140141 - 354-140141F1
Stamped 304 Stainless Steel.
Sea-Dog 140060 D-Shackle, 1/4" - 140060 - 354-140060F1
Stamped 304 Stainless Steel.
Sea-Dog 1398001 Trigger Snap - Bronze - 136800-1 - 354-1368001F1
Trigger snaps feature an extra secure hinged snap hook that closes tighter under load. Constructed of die cast manganese bronze for durability. Spring-loaded bolts provide secure closure with the advantage of an easy-open thumb lever. 360° swivel strap eye eliminates tangling.
Sea-Dog 1398001 Trigger Snap - Brass - 139800-1 - 354-1398001F1
Trigger snaps feature an extra secure hinged snap hook that closes tighter under load. Constructed of sand cast brass for durability. Spring-loaded bolts provide secure closure with the advantage of an easy-open thumb lever. 360° swivel strap eye eliminates tangling.
Sea-Dog 1391231 Brass Fast Eye Snap-Size 3 - 139123-1 - 354-1391231F1
Sand cast brass.
Sea-Dog 1391221 Brass Fast Eye Snap-Size 2 - 139122-1 - 354-1391221F1
Sand cast brass.
Sea-Dog 1391211 Brass Fast Eye Snap-Size 1 - 139121-1 - 354-1391211F1
Sand cast brass.
Sea-Dog 139120 Brass Fast Eye Snap-Size 0 - 139120-1 - 354-1391201F1
Sand cast brass.
Sea-Dog 1384201 Fast Eye Baby Snap, Bronze 2/Pk - 138420-1 - 354-1384201F1
Works well in a number of light duty rigging applications. Constructed of die cast manganese bronze for corrosion resistance and durability.
Sea-Dog 1310421 Swivel Eye Baby Snap, Bronze - 131042-1 - 354-1310421F1
Constructed of marine grade die cast manganese bronze, for maximum corrosion resistance and superior durability, these round swivel eye baby snaps work well in a number of light duty lifting and rigging applications. 360° swivel eye eliminates tangling.
Sea-Dog 092100 Pulley - 092100-1 - 354-0921001F1
Stainless steel pulley with plastic sheave for 1/4" wire. Useful for rigging a sail system or anchor trolley. Micro size block pulley.
Sea-Dog 0897041 Oblong Pad Eye 3-5/16" Stainless - 089704-1 - 354-0897041F1
Oblong pad eye plate fittings are constructed of stamped 304 stainless steel for corrosion resistance. Multitude of uses. Mounting hardware sold separately.
Sea-Dog 089703 Oblong Pad Eye 3-3/16" Stainless - 89703 - 354-089703F1
Oblong pad eye plate fittings are constructed of stamped 304 stainless steel for corrosion resistance. Multitude of uses. Mounting hardware sold separately.
Sea-Dog 0897021 Oblong Pad Eye 2-9/16" Stainless - 089702-1 - 354-0897021F1
Oblong pad eye plate fittings are constructed of stamped 304 stainless steel for corrosion resistance. Multitude of uses. Mounting hardware sold separately.
Sea-Dog 0897011 Oblong Pad Eye 2-1/8" Stainless - 089701-1 - 354-0897011F1
Oblong pad eye plate fittings are constructed of stamped 304 stainless steel for corrosion resistance. Multitude of uses. Mounting hardware sold separately.
Sea-Dog 089613 Diamond Eye Plate W/Ring, 3-3/16", Bulk - 89613 - 354-089613F1
Made from corrosion resistant stamped 304 stainless steel. Designed to create an attachment point. Featuring an additional ring to allow for more tie down options. Great for tying off light loads, securing fenders, cargo net, etc. Bulk.
Sea-Dog 089603 Diamond Eye Plate, 3-3/16" - 089603-1 - 354-0896031F1
Made from corrosion resistant stamped 304 stainless steel these diamond eye plates are designed to create an attachment point. Great for tying off light loads inside or outside of your boat. Use diamond eye plates to secure fenders, cargo net, etc. Requires 4 FH fasteners.
Sea-Dog 0896021 Diamond Eye Plate, 2-1/2" - 089602-1 - 354-0896021F1
Made from corrosion resistant stamped 304 stainless steel these diamond eye plates are designed to create an attachment point. Great for tying off light loads inside or outside of your boat. Use diamond eye plates to secure fenders, cargo net, etc. Requires 4 FH fasteners.
Sea-Dog 089601 Diamond Eye Plate, 2-5/16" - 089601-1 - 354-0896011F1
Made from corrosion resistant stamped 304 stainless steel these diamond eye plates are designed to create an attachment point. Great for tying off light loads inside or outside of your boat. Use diamond eye plates to secure fenders, cargo net, etc. Requires 4 FH fasteners.
Sea-Dog 089513 Swivel Eye Plate With Ring, A:2", B:1-9/16", C:1-3/8", D:1", E: 1-15/16" F:5/16" #10 Fh - 89513 - 354-089513F1
Features an eye that swivels 360° on the base and an additional ring for more tie down options. Great for tying off light loads, fenders, etc. (NOT appropriate for overhead lifting). Constructed of corrosion resistant stamped 304 stainless steel. Installs with four #10 FH fasteners (not included).
Sea-Dog 0813111 Nylon Pad Eye, White, 5/Cd - 081311-1 - 354-0813111F1
Injection molded nylon pad eyes can be used for a multitude of applications. UV stabilized and corrosion resistant they install with two #8 FH fasteners (not included).
Sea-Dog 0813101 Nylon Pad Eye, Black, 5/Cd - 081310-1 - 354-0813101F1
Injection molded nylon pad eyes can be used for a multitude of applications. UV stabilized and corrosion resistant they install with two #8 FH fasteners (not included).
Sea-Dog 0812801 Pad Eye, 1 Pr. - 081280-1 - 354-0812801F1
Polished cast brass pad eye can be used for a variety of applications both decorative and functional. Great for block attachment, controlling lead lines, or creating tie down points. Installs with two #8 FH fasteners (not included).
Sea-Dog 0812761 Pad Eye Chrome/Bronze 3/8", 1 Pr. - 081276-1 - 354-0812761F1
Forged bronze wire.
Sea-Dog 081276 Pad Eye Chrome/Bronze 3/8" - 81276 - 354-081276F1
Forged bronze wire.
Sea-Dog 0812751 Pad Eye Chrome/Bronze 5/16", 1 Pr. - 081275-1 - 354-0812751F1
Forged bronze wire.
Sea-Dog 0812711 Pad Eye, A: 3/8" B: 1/2" C: 1-5/8" , Brass, #10 Fh - 081271-1 - 354-0812711F1
These Pad Eyes are great for a block attachments, controlling a lead line, or creating a tie down point. Constructed of brass. Installs with two FH fasteners (not included).
Sea-Dog 081271 Pad Eye Bronze 3/8" - 81271 - 354-081271F1
Forged bronze wire.
Sea-Dog 0812701 Pad Eye 5/16" Bronze, 1 Pr. - 081270-1 - 354-0812701F1
Forged bronze wire.
Sea-Dog 081270 Pad Eye Bronze 5/16" - 81270 - 354-081270F1
Forged bronze wire.
Sea-Dog 0812621 Tie Down Eye Strap, A: 3/8" B:2" C:3-1/8" D:1/4", #10 Fh - 081262-1 - 354-0812621F1
Commonly used to hold down batteries, fuel tanks, ice chests, life rafts, dinghies, etc. Their flat, low profile makes them ideal for 1" (081261), 1-3/8" (081265) or 2" (081262) webbing. Constructed of corrosion resistant forged 304 stainless steel. Installs with two #10 FH fasteners
Sea-Dog 0812611 Tie Down Eye Straps, Stainless, 1 Pr. - 081261-1 - 354-0812611F1
Commonly used to hold down batteries, fuel tanks, ice chests, life rafts, dinghies, etc., these tie down eye straps can be used for a multitude of applications. Their flat, low profile makes them ideal for webbing. Constructed of corrosion resistant, forged 304 stainless steel, they install with two #10 FH fasteners (not included).
Sea-Dog 081261 Tie Down Eye Strap, Stainless - 81261 - 354-081261F1
Commonly used to hold down batteries, fuel tanks, ice chests, life rafts, dinghies, etc., these tie down eye straps can be used for a multitude of applications. Their flat, low profile makes them ideal for webbing. Constructed of corrosion resistant, forged 304 stainless steel, they install with two #10 FH fasteners (not included).
Sea-Dog 0812521 Tie Down Eye Straps, Chrome/Brass, 1 Pr. - 081252-1 - 354-0812521F1
Commonly used to hold down batteries, fuel tanks, ice chests, life rafts, dinghies, etc., these tie down eye straps can be used for a multitude of applications. Their flat, low profile makes them ideal for webbing. Constructed of chrome-plated, forged bronze, they install with two #10 FH fasteners (not included).
Sea-Dog 0812421 Chrome Zinc Pad Eye, 5/Cd - 081242-1 - 354-0812421F1
These die cast, chrome plated zinc pad eyes can be used for a variety of applications. Great for block attachment, controlling lead lines, or creating tie down points. Installs with two #8 FH fasteners (not included). Recommended for freshwater use
Sea-Dog 081242 Chrome Zinc Pad Eye, 5/Bg - 81242 - 354-081242F1
These die cast, chrome plated zinc pad eyes can be used for a variety of applications. Great for block attachment, controlling lead lines, or creating tie down points. Installs with two #8 FH fasteners (not included). Recommended for freshwater use
Sea-Dog 0812201 Pad Eye - 081220-1 - 354-0812201F1
Tie down your investments, accessories, and carry-ons securely with these forged 304 stainless steel pad eyes. Featuring a higher profile, they can accommodate larger diameter ropes than standard pad eyes making them ideal as a deck loop or tie-down for kayaks, roped accessories, etc. Corrosion resistant.
Sea-Dog 0812051 Pad Eye, A: 3/8" B:1/2" C: 1-5/8" #10 Fh - 081205-1 - 354-0812051F1
These corrosion resistant forged 304 stainless steel pad eyes can be used for a variety of applications. Great for block attachment, controlling lead lines, or creating tie down points. Installs with two FH fasteners (not included).
Sea-Dog 0812001 Pad Eye Ss 5/16", 2/Card - 081200-1 - 354-0812001F1
These corrosion resistant forged 304 stainless steel pad eyes can be used for a variety of applications. Great for block attachment, controlling lead lines, or creating tie down points. Installs with two FH fasteners (not included).
Sea-Dog 081200 Pad Eye Ss 5/16", Bulk - 81200 - 354-081200F1
These corrosion resistant forged 304 stainless steel pad eyes can be used for a variety of applications. Great for block attachment, controlling lead lines, or creating tie down points. Installs with two FH fasteners (not included).
Sea-Dog 081104 Pad Eye 1" Stainless, Bulk - 81104 - 354-081104F1
Great for block attachment, controlling lead lines, or creating tie down points pad eyes can be used for a variety of applications. Installs with two RH fasteners (not included). Constructed of stamped 304 stainless steel for corrosion resistance.
Sea-Dog 0811031 Pad Eye 3/4" Stainless, 4/Cd - 081103-1 - 354-0811031F1
Great for block attachment, controlling lead lines, or creating tie down points pad eyes can be used for a variety of applications. Installs with two RH fasteners (not included). Constructed of stamped 304 stainless steel for corrosion resistance.
Sea-Dog 081103 Pad Eye 3/4" Stainless, Bulk - 81103 - 354-081103 Superseded By: 354-0811031F1
Great for block attachment, controlling lead lines, or creating tie down points pad eyes can be used for a variety of applications. Installs with two RH fasteners (not included). Constructed of stamped 304 stainless steel for corrosion resistance.
Sea-Dog 0811021 Pad Eye 5/8" Stainless, 4/Cd - 081102-1 - 354-0811021F1
Great for block attachment, controlling lead lines, or creating tie down points pad eyes can be used for a variety of applications. Installs with two RH fasteners (not included). Constructed of stamped 304 stainless steel for corrosion resistance.
Sea-Dog 081102 Pad Eye 5/8" Stainless, Bulk - 81102 - 354-081102F1
Great for block attachment, controlling lead lines, or creating tie down points pad eyes can be used for a variety of applications. Installs with two RH fasteners (not included). Constructed of stamped 304 stainless steel for corrosion resistance.
Sea-Dog 0811011 Pad Eye 1/2" Stainless, 4/Cd - 081101-1 - 354-0811011F1
Great for block attachment, controlling lead lines, or creating tie down points pad eyes can be used for a variety of applications. Installs with two RH fasteners (not included). Constructed of stamped 304 stainless steel for corrosion resistance.
Sea-Dog 081101 Pad Eye 1/2" Stainless, Bulk - 81101 - 354-081101F1
Great for block attachment, controlling lead lines, or creating tie down points pad eyes can be used for a variety of applications. Installs with two RH fasteners (not included). Constructed of stamped 304 stainless steel for corrosion resistance.
Sea-Dog 081011 Exit Plate, Small, Straight - 81011 - 354-081011F1
Stamped 316 stainless steel exit plates are used to guide halyards out of a mast or spar or from below deck and allow exterior adjustment of the halyard. Small exit plates have a stamped wear guard and handle line up to 1/2".Flat version for standard masts.
Sea-Dog 080866 Shoulder Eye Bolt, Galvanized, 3/4" X 9" - 80866 - 354-080866F1
Sea-Dog® eye bolts with shoulder are forged hot dipped galvanized construction and feature UNC threads. Designed to take inline loads, shouldered eyebolts can handle limited side loading. Comes complete with UNC galvanized nut.
Sea-Dog 080856 Shoulder Eye Bolt, Galvanized, 5/8" X 8-5/16" - 80856 - 354-080856F1
Sea-Dog® eye bolts with shoulder are forged hot dipped galvanized construction and feature UNC threads. Designed to take inline loads, shouldered eyebolts can handle limited side loading. Comes complete with UNC galvanized nut.
Sea-Dog 080854 Shoulder Eye Bolt, Galvanized, 5/8" X 6-9/16" - 80854 - 354-080854F1
Sea-Dog® eye bolts with shoulder are forged hot dipped galvanized construction and feature UNC threads. Designed to take inline loads, shouldered eyebolts can handle limited side loading. Comes complete with UNC galvanized nut.
Sea-Dog 080843 Shoulder Eye Bolt, Galvanized, 1/2" X 5-1/8" - 80843 - 354-080843F1
Sea-Dog® eye bolts with shoulder are forged hot dipped galvanized construction and feature UNC threads. Designed to take inline loads, shouldered eyebolts can handle limited side loading. Comes complete with UNC galvanized nut.
Sea-Dog 080834 Shoulder Eye Bolt, Galvanized, 3/8" X 6-1/16" - 80834 - 354-080834F1
Sea-Dog® eye bolts with shoulder are forged hot dipped galvanized construction and feature UNC threads. Designed to take inline loads, shouldered eyebolts can handle limited side loading. Comes complete with UNC galvanized nut.
Sea-Dog 080832 Shoulder Eye Bolt, Galvanized, 3/8" X 3-15/16" - 80832 - 354-080832F1
Sea-Dog® eye bolts with shoulder are forged hot dipped galvanized construction and feature UNC threads. Designed to take inline loads, shouldered eyebolts can handle limited side loading. Comes complete with UNC galvanized nut.
Sea-Dog 080822 Shoulder Eye Bolt, Galvanized, 5/16" X 3-9/16" - 80822 - 354-080822F1
Sea-Dog® eye bolts with shoulder are forged hot dipped galvanized construction and feature UNC threads. Designed to take inline loads, shouldered eyebolts can handle limited side loading. Comes complete with UNC galvanized nut.
Sea-Dog 0807101 Eye Bolt, 10Mm X 5-5/8" - 080710-1 - 354-0807101F1
Sea-Dog® eye bolts are constructed of corrosion resistant machined 304 stainless steel and feature metric threads. Designed to take inline loads only. Comes complete with metric nuts.
Sea-Dog 080708 Eye Bolt, 8Mm X 4-3/8" - 080708-1 - 354-0807081F1
Sea-Dog® eye bolts are constructed of corrosion resistant machined 304 stainless steel and feature metric threads. Designed to take inline loads only. Comes complete with metric nuts.
Sea-Dog 080504 Eye Bolt W/Shoulder, 3/4" I.D. - 080504-1 - 354-0805041F1
Corrosion resistant machined 304 stainless steel w/metric threads. Designed to take inline loads, shouldered eyebolts can handle limited side loading.Comes complete with metric nuts.
Sea-Dog 0804991 Eye Bolt W/Shoulder, 5/8" I.D. - 080499-1 - 354-0804991F1
Corrosion resistant machined 304 stainless steel w/metric threads. Designed to take inline loads, shouldered eyebolts can handle limited side loading.Comes complete with metric nuts.
Sea-Dog 080499 Eye Bolt W/Shoulder, 5/8" I.D. - 80499 - 354-080499F1
Corrosion resistant machined 304 stainless steel w/metric threads. Designed to take inline loads, shouldered eyebolts can handle limited side loading.Comes complete with metric nuts.
Sea-Dog 0804951 Eye Bolt W/Shoulder, 5/8" I.D. - 080495-1 - 354-0804951F1
Corrosion resistant machined 304 stainless steel w/metric threads. Designed to take inline loads, shouldered eyebolts can handle limited side loading.Comes complete with metric nuts.
Sea-Dog 080495 Eye Bolt W/Shoulder, 5/8" I.D. - 80495 - 354-080495F1
Corrosion resistant machined 304 stainless steel w/metric threads. Designed to take inline loads, shouldered eyebolts can handle limited side loading.Comes complete with metric nuts.
Sea-Dog 0804881 Eye Bolt W/Shoulder, 5/8" I.D. - 080488-1 - 354-0804881F1
Corrosion resistant machined 304 stainless steel w/metric threads. Designed to take inline loads, shouldered eyebolts can handle limited side loading.Comes complete with metric nuts.
Sea-Dog 080488 Eye Bolt W/Shoulder, 5/8" I.D. - 80488 - 354-080488F1
Corrosion resistant machined 304 stainless steel w/metric threads. Designed to take inline loads, shouldered eyebolts can handle limited side loading.Comes complete with metric nuts.
Sea-Dog 0804831 Eye Bolt W/Shoulder, 9/16" I.D. - 080483-1 - 354-0804831F1
Corrosion resistant machined 304 stainless steel w/metric threads. Designed to take inline loads, shouldered eyebolts can handle limited side loading.Comes complete with metric nuts.
Sea-Dog 080483 Eye Bolt W/Shoulder, 9/16" I.D. - 80483 - 354-080483F1
Corrosion resistant machined 304 stainless steel w/metric threads. Designed to take inline loads, shouldered eyebolts can handle limited side loading.Comes complete with metric nuts.
Sea-Dog 0804661 Eye Bolt W/Shoulder, 1/2" I.D. - 080466-1 - 354-0804661F1
Corrosion resistant machined 304 stainless steel w/metric threads. Designed to take inline loads, shouldered eyebolts can handle limited side loading.Comes complete with metric nuts.
Sea-Dog 080466 Eye Bolt W/Shoulder, 1/2" I.D. - 80466 - 354-080466F1
Corrosion resistant machined 304 stainless steel w/metric threads. Designed to take inline loads, shouldered eyebolts can handle limited side loading.Comes complete with metric nuts.
Sea-Dog 0804631 Eye Bolt W/Shoulder, 1/2" I.D. - 080463-1 - 354-0804631F1
Corrosion resistant machined 304 stainless steel w/metric threads. Designed to take inline loads, shouldered eyebolts can handle limited side loading.Comes complete with metric nuts.
Sea-Dog 080463 Eye Bolt W/Shoulder, 1/2" I.D. - 80463 - 354-080463F1
Corrosion resistant machined 304 stainless steel w/metric threads. Designed to take inline loads, shouldered eyebolts can handle limited side loading.Comes complete with metric nuts.
Sea-Dog 080098 Stern Eye - Heavy Duty - 80098 - 354-080098F1
This Heavy Duty Stern Eye is for use as a tie-down point on your boat's stern. Robust backing plate for added rigidity in water-ski tow applications. Constructed of corrosion resistant machined 304 stainless steel. Includes adjustable finish nuts, which provide superior performance over crimp ring style stern eyes. Maximum hull thickness 6".
Sea-Dog 080095 Stainless Bow Eye 5/8" X 5-1/2", Bulk - 80095 - 354-080095F1
Constructed of corrosion resistant machined 304 stainless steel and comes with adjustable finish nuts which provides superior performance over crimp ring style bow eyes. The 3/8" shafts have rolled threads. For use as a tie-down point on your boat's bow. Can be used in conjunction with lifting eyes for a more robust lifting assembly.
Sea-Dog 0800851 Stainless Bow Eye 1/2" X 3-7/16", Carded - 080085-1 - 354-0800851F1
Constructed of corrosion resistant machined 304 stainless steel and comes with adjustable finish nuts which provides superior performance over crimp ring style bow eyes. The 3/8" shafts have rolled threads. For use as a tie-down point on your boat's bow. Can be used in conjunction with lifting eyes for a more robust lifting assembly.
Sea-Dog 0800551 Stainless Bow Eye 7/16" X 3-1/2", Carded - 080055-1 - 354-0800551F1
Constructed of corrosion resistant machined 304 stainless steel and comes with adjustable finish nuts which provides superior performance over crimp ring style bow eyes. The 3/8" shafts have rolled threads. For use as a tie-down point on your boat's bow. Can be used in conjunction with lifting eyes for a more robust lifting assembly.
Sea-Dog 0800361 Stainless Bow Eye 3/8" X 4-1/4", Bulk - 080036-1 - 354-0800361F1
Constructed of corrosion resistant machined 304 stainless steel and comes with adjustable finish nuts which provides superior performance over crimp ring style bow eyes. The 3/8" shafts have rolled threads. For use as a tie-down point on your boat's bow. Can be used in conjunction with lifting eyes for a more robust lifting assembly.
Sea-Dog 0800351 Stainless Bow Eye 3/8" X 3-1/2", Carded - 080035-1 - 354-0800351F1
Constructed of corrosion resistant machined 304 stainless steel and comes with adjustable finish nuts which provides superior performance over crimp ring style bow eyes. The 3/8" shafts have rolled threads. For use as a tie-down point on your boat's bow. Can be used in conjunction with lifting eyes for a more robust lifting assembly.
Sea-Dog 0800331 Stainless Bow Eye 3/8" X 2-1/2", Carded - 080033-1 - 354-0800331F1
Constructed of corrosion resistant machined 304 stainless steel and comes with adjustable finish nuts which provides superior performance over crimp ring style bow eyes. The 3/8" shafts have rolled threads. For use as a tie-down point on your boat's bow. Can be used in conjunction with lifting eyes for a more robust lifting assembly.
Sea-Dog 0800311 Stainless Bow Eye 3/8" X 1-1/2", Bulk - 080031-1 - 354-0800311F1
Constructed of corrosion resistant machined 304 stainless steel and comes with adjustable finish nuts which provides superior performance over crimp ring style bow eyes. The 3/8" shafts have rolled threads. For use as a tie-down point on your boat's bow. Can be used in conjunction with lifting eyes for a more robust lifting assembly.
Sea-Dog 079720 Weldable Bow Eye - Double, 3-15/16" - 79720 - 354-079720F1
Weldable bow eyes are designed to add or replace a tie-down point on your boat's bow. Sand cast aluminum construction, for maximum corrosion resistance and durability. Weldable for permanent installation on aluminum vessels. Cast 356-T6 Aluminum. This alloy contains lead.
Sea-Dog 0791351 Chrome Zinc Bow Eye - 3/8" - 079135-1 - 354-0791351F1
For use to add or replace a tie-down point on your boat's bow these bow eyes feature a die cast chrome plated zinc head with a galvanized shaft. 3/8"-16 UNC threads. Nut and washer included. Recommended for fresh water applications. Breaking strength is 2,500 lbs.
Sea-Dog 0791331 Chrome Zinc Bow Eye - 3/8" - 079133-1 - 354-0791331F1
For use to add or replace a tie-down point on your boat's bow these bow eyes feature a die cast chrome plated zinc head with a galvanized shaft. 3/8"-16 UNC threads. Nut and washer included. Recommended for fresh water applications. Breaking strength is 2,500 lbs.
Sea-Dog 061310 Samson Post, 5-1/8" - 61310 - 354-061310F1
The investment cast 316 stainless steel heavy-duty Samson post is sturdy enough to secure a tow line. Ideal for anchor lines, they are engineered to keep your vessel secure even in the roughest weather. Durable and corrosion resistant. Installs with 4 FH fasteners (not included).
Sea-Dog 055424 Rub Strake, A: 24" B:7-1/16" C: 7-1/16" D:1/4" E:3/4", #8Fh - 055424-1 - 354-0554241F1
Durable and corrosion resistant 304 stainless steel rub strakes are designed to protect your boat's dock, fender, & anchor lines by preventing chafing from cap rails, gunwales, etc. Requires #8 FH fasteners (not included).
Sea-Dog 055418 Rub Strake A: 18" B:7-1/2" C: 7-1/2" D:1/4" E:3/4", #8Fh - 055418-1 - 354-0554181F1
Durable and corrosion resistant 304 stainless steel rub strakes are designed to protect your boat's dock, fender, & anchor lines by preventing chafing from cap rails, gunwales, etc. Requires #8 FH fasteners (not included).
Sea-Dog 0554121 Rub Strake, A:12" ,B: 4-1/2" C: 4-1/2", D: 1/4" E:3/4", #8 Fh - 055412-1 - 354-0554121F1
Durable and corrosion resistant 304 stainless steel rub strakes are designed to protect your boat's dock, fender, & anchor lines by preventing chafing from cap rails, gunwales, etc. Requires #8 FH fasteners (not included).
Sea-Dog 055412 Rub Strake, 12" - 055412-1 - 354-055412 Superseded By: 354-0554121F1
Durable and corrosion resistant 304 stainless steel rub strakes are designed to protect your boat's dock, fender, & anchor lines by preventing chafing from cap rails, gunwales, etc. Requires #8 FH fasteners (not included).
Sea-Dog 0554081 Rub Strake, A:8", B: 5" D:1/4" E: 3/4" #8 Fh - 055408-1 - 354-0554081F1
Durable and corrosion resistant 304 stainless steel rub strakes are designed to protect your boat's dock, fender, & anchor lines by preventing chafing from cap rails, gunwales, etc. Requires #8 FH fasteners (not included).
Sea-Dog 048620 Folding D-Ring - 048620-1 - 354-0486201F1
316 stainless steel base with strong, corrosion resistant, stainless steel D-ring. Convenient folding design keeps fittings out of the way when not in use. Requires four 1/4" FH fasteners (not included).
Sea-Dog 048500 Folding Cleat - 048500-1 - 354-0485001F1
Cast 316 stainless steel folding cleat. Durable and corrosion resistant. Folding design conveniently keeps cleat out of the way when not in use.
Sea-Dog 046210 Large Weldable Aluminum Cleat, 10" - 46210 - 354-046210F1
Large weldable cleat. Sand cast aluminum construction, for maximum corrosion resistance and durability. Weldable base for permanent installations. Designed for use on aluminum vessels.
Sea-Dog 046110 Open Base Aluminum Cleat - Flat Head, 10" - 46110 - 354-046110F1
Open base cleats feature die-cast aluminum construction. Large base distributes heavy loads evenly. Designed for use on docks or aluminum vessels. Countersunk for FH fasteners (not included).
Sea-Dog 0461081 Open Base Aluminum Cleat - Flat Head, 8" - 046108-1 - 354-0461081F1
Open base cleats feature die-cast aluminum construction. Large base distributes heavy loads evenly. Designed for use on docks or aluminum vessels. Countersunk for FH fasteners (not included).
Sea-Dog 0461061 Closed Base Aluminum Cleat - Flat Head, 6" - 046106-1 - 354-0461061F1
Closed base cleats feature die-cast aluminum construction. Large base distributes heavy loads evenly. Designed for use on docks or aluminum vessels. Countersunk for FH fasteners (not included).
Sea-Dog 0461051 Closed Base Aluminum Cleat - Flat Head, 5" - 046105-1 - 354-0461051F1
Closed base cleats feature die-cast aluminum construction. Large base distributes heavy loads evenly. Designed for use on docks or aluminum vessels. Countersunk for FH fasteners (not included).
Sea-Dog 046048 Weldable Aluminum Cleat, 8" - 46048 - 354-046048F1
Sand cast aluminum construction, for maximum corrosion resistance and durability. Weldable base for permanent installations. Designed for use on aluminum vessels. Cast 356-T6 Aluminum. This alloy contains lead.
Sea-Dog 046046 Weldable Aluminum Cleat, 6" - 46046 - 354-046046F1
Sand cast aluminum construction, for maximum corrosion resistance and durability. Weldable base for permanent installations. Designed for use on aluminum vessels. Cast 356-T6 Aluminum. This alloy contains lead.
Sea-Dog 0441061 4-Hole Cleat, Chrome Zinc, 6", Carded - 044106-1 - 354-0441061F1
Die cast chrome plated zinc cleats are an economical choice for freshwater applications. Designed to keep lines snugly secured. Easy surface mount installation with four FH fasteners (not included).
Sea-Dog 0441041 4-Hole Cleat, Chrome Zinc, 4-1/2", Carded - 044104-1 - 354-0441041F1
Die cast chrome plated zinc cleats are an economical choice for freshwater applications. Designed to keep lines snugly secured. Easy surface mount installation with four FH fasteners (not included).
Sea-Dog 0435501 Nylon Zig Zag Cleat 2/Cd - 043550-1 - 354-0435501F1
Designed for easy, one-handed adjustability, this fastening point features enough holding power for bungees, small flags and other cord line quick secure accessories but without the extra line weaves of a horn-style cleat.
Sea-Dog 0435401 Nylon Zig Zag Cleat 2/Cd - 043540-1 - 354-0435401F1
A great primary cleat for kayaks, canoes and other small vessels. Constructed of UV stabilized injection molded nylon it is corrosion resistant. Easy to use, simply weave rope around cleat arms, no knots required. The cross-functional lace back design is great for single handed tie-offs. Makes quick work of adjusting and securing anchor, mooring or fender lines. Fits line up to 3/8".
Sea-Dog 0430801 Open Base Nylon Cleat, A: 8" B: 1-11/16" C: 2" D:3-3/8" 1/4" Fh - 043080-1 - 354-0430801F1
Durable corrosion and UV resistant injection molded nylon construction. These open base cleats are designed with a molded-in recess in the base trapping sealant in place providing a more watertight seal. Easy to install, requires two FH fasteners (not included).
Sea-Dog 0421051 Closed Base Brass Cleat, 5", Carded - 042105-1 - 354-0421051F1
Built to withstand the elements. Constructed of polished cast brass for an attractive yet classic appearance. Installation requires two FH fasteners (not included).
Sea-Dog 0421041 Closed Base Brass Cleat, 4" - 042104-1 - 354-0421041F1
Built to withstand the elements. Constructed of polished cast brass for an attractive yet classic appearance. Installation requires two FH fasteners (not included).
Sea-Dog 042103 Closed Base Brass Cleat, 3-3/16", Bulk - 42103 - 354-042103F1
Built to withstand the elements. Constructed of polished cast brass for an attractive yet classic appearance. Installation requires two FH fasteners (not included).
Sea-Dog 041906 Low Silhouette Cleat, 6" - 041906-1 - 354-0419061F1
Low Silhouette Cleats designed to fit in tight spaces. A wide base, heavy duty version of the classic 4-hole cleat. Constructed of corrosion resistant investment cast 316 stainless steel for superior durability. Installs with four 1/4" FH fasteners (not included).
Sea-Dog 0416661 Smart Cleat - Stud Mount , 6-1/4" - 041666-1 - 354-0416661F1
The Stud Mount Smart Cleat provides easy line tie-off in a classic style. Knob end prevents lines from easily slipping off and minimizes potential collision injuries. The stud mounted fasteners are hidden, leaving no exposed fasteners to collect water or debris. Studs are 1/4"-20 x 1-1/2". Includes stainless steel washers and nuts. Constructed of corrosion resistant investment cast 316 stainless steel.
Sea-Dog 0416361 Ss Smart Cleat, 6-1/4" - 041636-1 - 354-0416361F1
The Smart Cleat provides easy line tie-off in a classic style. Knob end prevents lines from easily slipping off and minimizes potential collision injuries. Constructed of corrosion resistant investment cast 316 stainless steel. Install with four 1/4" FH fasteners (not included).
Sea-Dog 0416121 Cleat, Stainless Open Base, , A: 12" , B: 2-1/8", C:3-3/4", D:1-7/8", 5/16" Fh - 041612-1 - 354-0416121F1
316 stainless steel open base cleats provide easy line tie-off and corrosion resistance in a classic style. Four thru-bolts required for installation (not included).
Sea-Dog 0416101 Cleat, Stainless Open Base, A: 10" , B:1-7/8", C:3-5/8", D:1-3/4", 5/16" Fh - 041610-1 - 354-0416101F1
316 stainless steel open base cleats provide easy line tie-off and corrosion resistance in a classic style. Four thru-bolts required for installation (not included).
Sea-Dog 041610 Cleat, Stainless Open Base, A: 10" , B:1-7/8", C:3-5/8", D:1-3/4", 5/16" Fh - 41610 - 354-041610F1
316 stainless steel open base cleats provide easy line tie-off and corrosion resistance in a classic style. Four thru-bolts required for installation (not included).
Sea-Dog 0416081 Cleat, Stainless Open Base, , A:8" , B:1-1/2", C:2-13/16", D:1-3/8",1/4" Fh - 041608-1 - 354-0416081F1
316 stainless steel open base cleats provide easy line tie-off and corrosion resistance in a classic style. Four thru-bolts required for installation (not included).
Sea-Dog 041608 Cleat, Stainless Open Base,A:8" , B:1-1/2", C:2-13/16", D:1-3/8",1/4" Fh - 41608 - 354-041608F1
316 stainless steel open base cleats provide easy line tie-off and corrosion resistance in a classic style. Four thru-bolts required for installation (not included).
Sea-Dog 0416061 Cleat, Stainless Open Base, A: 6", B:1-1/4", C:2-1/4", D:1-1/8", 1/4" Fh - 041606-1 - 354-0416061F1
316 stainless steel open base cleats provide easy line tie-off and corrosion resistance in a classic style. Four thru-bolts required for installation (not included).
Sea-Dog 0416051 Cleat, Stainless Open Base, , A:5" , B:1-1/8", C:2-1/8", D:1", #10 Fh - 041605-1 - 354-0416051F1
316 stainless steel open base cleats provide easy line tie-off and corrosion resistance in a classic style. Four thru-bolts required for installation (not included).
Sea-Dog 0416041 Cleat, Stainless Open Base,, A:4" ,B:15/16", C:1-3/4", D:1", #10 Fh - 041604-1 - 354-0416041F1
316 stainless steel open base cleats provide easy line tie-off and corrosion resistance in a classic style. Four thru-bolts required for installation (not included).
Sea-Dog 0415041 S-Style Pull-Up Cleat With Studs - 041504-1 - 354-0415041F1
Corrosion resistant 316 stainless steel pull-up cleats recess flush to the deck for an attractive contemporary look. The stud mounted fasteners are hidden and will accept drain hoses for water drainage to bilge. Includes backing plate.
Sea-Dog 002400 Clamcleat® Major W/Spring Gate - 002400-1 - 354-0024001F1
The red gate is flipped up by hand to keep the rope out of the aluminum alloy cleat and prevent unintentional entry of the rope into the cleat.The CL240 is a modified CL220.
Sea-Dog 002200 Clamcleat® Racing , Cl220 - Major, Silver - 002200-1 - 354-0022001F1
With the CL220 the rope drops down into the teeth to give a quick and positive lock that is easy to release. Manufactured from aluminium for light weight and durable performance. CL220 has a silver stove enamel finish for a cost effective, high quality coating. Suitable for all inland and most coastal conditions.
Sea-Dog 002190 Clamcleat® Racing , Cl219 - Vertical, Silver - 002190-1 - 354-0021901F1
With the CL219 the rope drops down into the teeth to give a quick and positive lock that is easy to release. Manufactured from aluminium for light weight and durable performance. CL219 has a silver stove enamel finish for a cost effective, high quality coating. Suitable for all inland and most coastal conditions.
Sea-Dog 002120 Clamcleat® Leech Line Cleat/Shield - 2120 - 354-002120F1
Low profile white nylon cleat, for sewing or riveting onto sails and technical fabrics. It can be mounted in two positions on the sail. The tooth design allows a quick, positive lock that is easy to release, added to its low profile it is an ideal cleat for adjusting leech lines. Use a backing plate when riveting a cleat onto fabric as it will prevent the rivet pulling through. Includes two rivets, backing plate and cleat. Shield sold separately.
Sea-Dog 002111 Clamcleat® Racing Junior- Mk1 - 002111-1 - 354-0021111F1
Aluminum. A very strong alloy cleat. Available in standard silver finishes.
Sea-Dog 0020701 Clamcleat® Lateral, Port - 002070-1 - 354-0020701F1
Cost effective cleats that have a low profile on flat or vertical surfaces. Specifically designed to secure lines on ladders. The cleats can be used on metal or wood ladders.
Sea Dog Straight Toggle Pin With Lanyard, Carded - 299986-1 - 354-2999861F1
L-shaped Toggle Pin features a swivel flip lock for use with Bimini top hardware. For added security, the hinge prevents the 1/4" pin from being withdrawn from the fitting until the locking device is in line with the pin. Attached lanyard reduces risk of loss. Constructed of corrosion resistant 304 stainless steel.
Sea Dog Straight Toggle Pin With Lanyard, Bulk - 299986 - 354-299986F1
L-shaped Toggle Pin features a swivel flip lock for use with Bimini top hardware. For added security, the hinge prevents the 1/4" pin from being withdrawn from the fitting until the locking device is in line with the pin. Attached lanyard reduces risk of loss. Constructed of corrosion resistant 304 stainless steel.
Scotty 590S Snap Hook - 0590-Bk - 736-590Sf1
Use in conjunction with elastic cord to make the perfect length 'bungy' to secure or tether items.
Scotty 371 Trolling Snubber For Downrigger Weights W/Sampo™ Trolling Snap Only, 12/Case - 371 - 736-371F1
Place between your downrigger cable and weight. The Scotty Trolling Snubber absorbs shock, provides electrical insulation and helps prevent snags. Easy to grip. Trolling Snubber with swivel and self locating snap (weight not included).
Scotty 370Bucket Trolling Snubber For Downrigger Weights W/Sampo™ Ball Bearing & Trolling Snap, 50/Bucket - 0370-Bucket - 736-370Bucketf1
Place between your downrigger cable and weight. The Scotty Trolling Snubber absorbs shock, provides electrical insulation and helps prevent snags. Easy to grip. Trolling Snubber with swivel and self locating snap (weight not included).
Scotty 370 Trolling Snubber For Downrigger Weights W/Sampo™ Ball Bearing & Trolling Snap, 12/Case - 370 - 736-370F1
Place between your downrigger cable and weight. The Scotty Trolling Snubber absorbs shock, provides electrical insulation and helps prevent snags. Easy to grip. Trolling Snubber with swivel and self locating snap (weight not included).
Scotty 2702K 200 Lb. Premium Power Braid Downrigger Line, 400' Green, 6/Case - 2702K - 736-2702Kf1
Scotty Premium 200 lb. test Power Braid is our latest high tech, low drag, microfilament braided downrigger line. This custom manufactured braid offers the ultimate in strength, consistency and durability. The use of braided downrigger line helps combat electrolysis around your fishing gear and outlasts stainless steel cable. Terminal fastening kit included.
Scotty 2701K 200 Lb. Premium Power Braid Downrigger Line, 300' Green, 6/Case - 2701K - 736-2701Kf1
Scotty Premium 200 lb. test Power Braid is our latest high tech, low drag, microfilament braided downrigger line. This custom manufactured braid offers the ultimate in strength, consistency and durability. The use of braided downrigger line helps combat electrolysis around your fishing gear and outlasts stainless steel cable. Terminal fastening kit included.
Scotty 2700K 200 Lb. Premium Power Braid Downrigger Line, 200' Green, 6/Case - 2700K - 736-2700Kf1
Scotty Premium 200 lb. test Power Braid is our latest high tech, low drag, microfilament braided downrigger line. This custom manufactured braid offers the ultimate in strength, consistency and durability. The use of braided downrigger line helps combat electrolysis around your fishing gear and outlasts stainless steel cable. Terminal fastening kit included.
Scotty 2201K 250Lb Premium Braided Downrigger Line Kit, 300', 6/Case - 2201K - 736-2201Kf1
Braided line offers the ultimate in strength, consistency and durability. Made with Low Stretch 250 lb. test Dyneema® Fiber. Use of braided downrigger line helps combat electrolysis around your fishing gear. Includes line, coastlock snap & soft stop bumper.
Scotty 2200K 250Lb Premium Braided Downrigger Line Kit, 200', 6/Case - 2200K - 736-2200Kf1
Braided line offers the ultimate in strength, consistency and durability. Made with Low Stretch 250 lb. test Dyneema® Fiber. Use of braided downrigger line helps combat electrolysis around your fishing gear. Includes line, coastlock snap & soft stop bumper.
