Lines & Rigging
Seadog Fillet Table Rod Holder Mount - 326515-3 - 354-3265153F1
Solid one-piece construction for long life and easy maintenanceEasily adjustable, multi-position gimbaled rod holder mounting system folds flat for easy storageUV stabilized high-density polypropylene constructionAssembles in minutes, all assembly hardware includedEasily accessible knife and pliers holdersHose holder and towel bar
Seadog Fillet Table Rod Holder Mount - 326510-3 - 354-3265103F1
Solid one-piece construction for long life and easy maintenanceEasily adjustable, multi-position gimbaled rod holder mounting system folds flat for easy storageUV stabilized high-density polypropylene constructionAssembles in minutes, all assembly hardware includedEasily accessible knife and pliers holders
Seadog Drain Tube Flaring Tool - 520290-1 - 354-5202901F1
Drain Tube Flaring Tools for installing 1" drain tubes. Can be used to install all of Sea-Dog® Drain Tubes (520210-520430). Handy item for any toolbox. Drain tube not included.
Seadog Deluxe Hand Held Rope Cutter - 300095-3 - 354-3000953F1
Easily cuts nylon, polyester, polypropylene and Dacron cordage and webbing Cuts and heat seals at the same timeReplaceable blade heats to 1100° Fahrenheit (600° Celsius) in less than 10 secondsBrass bristle cleaning brush, T-handle Allen wrench, and carrying case included10' heavy-duty grounded cordETL listed
Seadog Combination Soft Bristle Brush & Squeegee - 491075-1 - 354-4910751F1
The Boat Hook Combination Soft Bristle Brush & Squeegee fits all Sea-Dog® Boat Hooks and universal/Acme threaded devices. This soft brush is constructed of injection molded nylon with a marine grade silicone rubber squeegee. Soft bristles are scratch resistant for gelcoat, paint, and plastic windows.
Seadog Clam Shell Vent | Stamped 304 Stainless | #6 Fastener - 331350-1 - 354-3313501F1
Clam shell ventilators provide splash protection for vent holes, wire or cable runs and blower-exhaust hose openings. 304 stamped stainless steel construction. Can be used for cabin ventilation with dorade boxes. Great for locker vents. Clam shell vents are ideal for applications where a taller vent would foul lines or restrict crew movement. Pre-drilled holes for a smooth screw on installation. #6 RH fasteners not included.
Seadog Clam Shell Vent | Stamped 304 Stainless | #6 Fastener - 331340-1 - 354-3313401F1
Clam shell ventilators provide splash protection for vent holes, wire or cable runs and blower-exhaust hose openings. 304 stamped stainless steel construction. Can be used for cabin ventilation with dorade boxes. Great for locker vents. Clam shell vents are ideal for applications where a taller vent would foul lines or restrict crew movement. Pre-drilled holes for a smooth screw on installation. #6 RH fasteners not included.
Seadog Clam Shell Vent | Stamped 304 Stainless | #6 Fastener - 331335-1 - 354-3313351F1
Clam shell ventilators provide splash protection for vent holes, wire or cable runs and blower-exhaust hose openings. 304 stamped stainless steel construction. Can be used for cabin ventilation with dorade boxes. Great for locker vents. Clam shell vents are ideal for applications where a taller vent would foul lines or restrict crew movement. Pre-drilled holes for a smooth screw on installation. #6 RH fasteners not included.
Seadog Cast Polished Brass Bell | #6 Fastener - 455721 - 354-455721F1
These Bells are constructed of improved cast brass (not lower grade spun brass). 8" Bells meets Coast Guard, ABYC, and NMMA requirements (200 cm mouth opening and striker mass no less than 3% of mass of the bell) for use on vessels 12m (39.4') to 20m (65.6') in length. Includes hanger and wall mounted bracket for easy installation. Installs with two #6 FH fasteners (not included). Chrome plated finish.
Seadog Cast Polished Brass Bell | #6 Fastener - 455720 - 354-455720F1
These Bells are constructed of improved cast brass (not lower grade spun brass). 8" Bells meets Coast Guard, ABYC, and NMMA requirements (200 cm mouth opening and striker mass no less than 3% of mass of the bell) for use on vessels 12m (39.4') to 20m (65.6') in length. Includes hanger and wall mounted bracket for easy installation. Installs with two #6 FH fasteners (not included). Mirror polished brass finish.
Seadog Cast Polished Brass Bell - #6 Fastener - 455001 - 354-455001F1
These Bells are constructed of improved cast brass (not lower grade spun brass). Meets Coast Guard, ABYC, and NMMA requirements (200 cm mouth opening and striker mass no less than 3% of mass of the bell) for use on vessels 12m (39.4") to 20m (65.6") in length. Includes hanger and wall mounted bracket for easy installation. Installs with two #6 FH fasteners (not included). Chrome plated finish.
Seadog Butt Hinge With Bearings | Commercial Pattern | Investment Cast 316 Stainless | 1/4" Fastener - 205246 - 354-205246F1
Constructed of investment cast 316 stainless steel these Butt Hinges are designed for applications where both extra strength and corrosion resistance are required. The integral nylon bearings promote rattle-free, silent movement and give the hinge a smoother action. The bearings also disburse the weight of the door compensating for heavier doors and increased use. Commercial ANSI templated screw hole pattern. Installs with eight 1/4" FH fasteners (not included).
Seadog Butt Hinge With Bearings | Commercial Pattern | Investment Cast 316 Stainless | 1/4" Fastener - 205244 - 354-205244F1
Constructed of investment cast 316 stainless steel these Butt Hinges are designed for applications where both extra strength and corrosion resistance are required. The integral nylon bearings promote rattle-free, silent movement and give the hinge a smoother action. The bearings also disburse the weight of the door compensating for heavier doors and increased use. Commercial ANSI templated screw hole pattern. Installs with eight 1/4" FH fasteners (not included).
Seadog Butt Hinge With Bearings | Commercial Pattern | Investment Cast 316 Stainless | 1/4" Fastener - 205243 - 354-205243F1
Constructed of investment cast 316 stainless steel these Butt Hinges are designed for applications where both extra strength and corrosion resistance are required. The integral nylon bearings promote rattle-free, silent movement and give the hinge a smoother action. The bearings also disburse the weight of the door compensating for heavier doors and increased use. Commercial ANSI templated screw hole pattern. Installs with eight 1/4" FH fasteners (not included).
Seadog Butt Hinge With Bearings | Commercial Pattern | Investment Cast 316 Stainless | 1/4" Fastener - 205242 - 354-205242F1
Constructed of investment cast 316 stainless steel these Butt Hinges are designed for applications where both extra strength and corrosion resistance are required. The integral nylon bearings promote rattle-free, silent movement and give the hinge a smoother action. The bearings also disburse the weight of the door compensating for heavier doors and increased use. Commercial ANSI templated screw hole pattern. Installs with eight 1/4" FH fasteners (not included).
Seadog Adjustable Wiper Arm - Hook Style, 19"-24" - 413174B-1 - 354-413174B1F1
Adjustable J-Hook (automotive style) Wiper Arm fits all standard MRV and heavy duty waterproof wiper motors with 5/8" shaft diameter. Compatible with 1.5 and 2.5" shafts. Powder coated 304 stainless steel construction.
Seadog Adjustable Wiper Arm - Hook Style, 13"-18" - 413168B-1 - 354-413168B1F1
Adjustable J-Hook (automotive style) Wiper Arm fits all standard MRV and heavy duty waterproof wiper motors with 5/8" shaft diameter. Compatible with 1.5 and 2.5" shafts. Powder coated 304 stainless steel construction.
Seadog Adjustable Wiper Arm - Hook Style W/Adjustable Pivoting Tip, 19"-24" - 413274B-1 - 354-413274B1F1
Adjustable J-Hook (automotive style) Wiper Arm with Adjustable Pivoting Tip fits all standard MRV and heavy duty waterproof wiper motors with 5/8" shaft diameter. Compatible with 1.5 and 2.5" shafts. The innovative adjustable tip allows blades to be set at different angles to maximize wiper blade coverage area and to ensure park position parallel to window frame. Powder coated 304 stainless steel construction.
Seadog Adjustable Wiper Arm - Hook Style W/Adjustable Pivoting Tip, 13"-18" - 413268B-1 - 354-413268B1F1
Adjustable J-Hook (automotive style) Wiper Arm with Adjustable Pivoting Tip fits all standard MRV and heavy duty waterproof wiper motors with 5/8" shaft diameter. Compatible with 1.5 and 2.5" shafts. The innovative adjustable tip allows blades to be set at different angles to maximize wiper blade coverage area and to ensure park position parallel to window frame. Powder coated 304 stainless steel construction.
Seadog Adjustable Pantographic Wiper Arm - Hook Style, 19"-24" - 413374B-1 - 354-413374B1F1
Adjustable J-Hook (automotive style) Pantograph Wiper Arm fits all standard MRV and heavy duty waterproof wiper motors with 5/8" shaft diameter. Compatible with 1.5 and 2.5" shafts. Powder coated 304 stainless steel construction.
Seadog Adjustable Pantographic Wiper Arm - Hook Style, 13"-18" - 413368B-1 - 354-413368B1F1
Adjustable J-Hook (automotive style) Pantograph Wiper Arm fits all standard MRV and heavy duty waterproof wiper motors with 5/8" shaft diameter. Compatible with 1.5 and 2.5" shafts. Powder coated 304 stainless steel construction.
Seadog 7271453 Pvc Standard Profile Cowl Vent & Snap On Deck Plate, White With Red Interior - 727145-3 - 354-7271453F1
Standard Cowl Vents with Snap-On Deck Plates are designed for air intake or cabin ventilation when used in conjunction with a dorade box. Great for bilge ventilation with or without a blower. Promotes passive air flow by preventing mold and mildew, and keeping boat interior smell fresh. Includes snap-on deck plate and cover for use in rough weather. Constructed of UV resistant dip molded PVC. Avoid contact with acetone or strong solvents.
Seadog 7271423 Pvc Low Profile Cowl Vent & Snap On Deck Plate - 727142-3 - 354-7271423F1
Low Profile Cowl Vents with Snap-On Deck Plates are designed for air intake or cabin ventilation when used in conjunction with a dorade box. Great for bilge ventilation with or without a blower. Ideal for applications where a taller vent would foul lines or restrict crew movement. Includes snap-on deck plate and cover for use in rough weather. Constructed of UV resistant dip molded PVC. Avoid contact with acetone or strong solvents.
Seadog 7271403 Pvc Low Profile Cowl Vent & Snap On Deck Plate - 727140-3 - 354-7271403F1
Low Profile Cowl Vents with Snap-On Deck Plates are designed for air intake or cabin ventilation when used in conjunction with a dorade box. Great for bilge ventilation with or without a blower. Ideal for applications where a taller vent would foul lines or restrict crew movement. Includes snap-on deck plate and cover for use in rough weather. Constructed of UV resistant dip molded PVC. Avoid contact with acetone or strong solvents.
Seadog 7271373 Pvc Standard Profile Cowl Vent & Snap On Deck Plate, White - 727137-3 - 354-7271373F1
Standard Cowl Vents with Snap-On Deck Plates are designed for air intake or cabin ventilation when used in conjunction with a dorade box. Great for bilge ventilation with or without a blower. Promotes passive air flow by preventing mold and mildew, and keeping boat interior smell fresh. Includes snap-on deck plate and cover for use in rough weather. Constructed of UV resistant dip molded PVC. Avoid contact with acetone or strong solvents.
Seadog 7271353 Pvc Standard Profile Cowl Vent & Snap On Deck Plate, White With Red Interior - 727135-3 - 354-7271353F1
Standard Cowl Vents with Snap-On Deck Plates are designed for air intake or cabin ventilation when used in conjunction with a dorade box. Great for bilge ventilation with or without a blower. Promotes passive air flow by preventing mold and mildew, and keeping boat interior smell fresh. Includes snap-on deck plate and cover for use in rough weather. Constructed of UV resistant dip molded PVC. Avoid contact with acetone or strong solvents.
Seadog 7271323 Pvc Low Profile Cowl Vent & Snap On Deck Plate - 727132-3 - 354-7271323F1
Low Profile Cowl Vents with Snap-On Deck Plates are designed for air intake or cabin ventilation when used in conjunction with a dorade box. Great for bilge ventilation with or without a blower. Ideal for applications where a taller vent would foul lines or restrict crew movement. Includes snap-on deck plate and cover for use in rough weather. Constructed of UV resistant dip molded PVC. Avoid contact with acetone or strong solvents.
Seadog 7271303 Pvc Low Profile Cowl Vent & Snap On Deck Plate - 727130-3 - 354-7271303F1
Low Profile Cowl Vents with Snap-On Deck Plates are designed for air intake or cabin ventilation when used in conjunction with a dorade box. Great for bilge ventilation with or without a blower. Ideal for applications where a taller vent would foul lines or restrict crew movement. Includes snap-on deck plate and cover for use in rough weather. Constructed of UV resistant dip molded PVC. Avoid contact with acetone or strong solvents.
Seadog 6714601 Hammock Hooks - Stainless, 2/Cd - 671460-1 - 354-6714601F1
Hammock Hooks are designed with an extra bend for additional holding power. Ideal for fender and lashing hook applications. Corrosion resistant stamped 304 stainless steel construction. Installs with two #6 FH fasteners (not included).
Seadog 604100 It Floats™ - Locking Winch Handle, 10" - 604100 - 354-604100F1
It Floats™ Locking Winch Handle's patented design is made by air assist injection molding instead of a foam filled method, thus preventing any potential leakage of foam from within the handle. Features ball bearings in the handle to ensure smoother action under load.
Seadog 604080 It Floats™ - Locking Winch Handle, 8" - 604080 - 354-604080F1
It Floats™ Locking Winch Handle's patented design is made by air assist injection molding instead of a foam filled method, thus preventing any potential leakage of foam from within the handle. Features ball bearings in the handle to ensure smoother action under load.
Seadog 588061 Flush Mt Drink Holder Combo White - 588061 - 354-588061F1
Flush Mount Combo Drink Holders feature a dual-purpose design which allows the use of beverage cans with or without insulated can wraps, as well as most standard size bottles. Installation requires a 3-3/4" diameter hole. All holders (except 588060NH) include drain holes. Available in black, white, or gray. Constructed of impact resistant injection molded ABS.
Seadog 588060 Flush Mt Drink Holder Combo Black - 588060 - 354-588060F1
Flush Mount Combo Drink Holders feature a dual-purpose design which allows the use of beverage cans with or without insulated can wraps, as well as most standard size bottles. Installation requires a 3-3/4" diameter hole. All holders (except 588060NH) include drain holes. Available in black, white, or gray. Constructed of impact resistant injection molded ABS.
Seadog 5806201 Bronze Angle Mount Oarlock Socket, A: 1/2" C:1-1/16" - 580620-1 - 354-5806201F1
Constructed of traditional, durable sand cast brass. Oarlock mounts accept 1/2" shafts and feature polyethylene inserts (#580699) for smooth rotation.
Seadog 5806101 Brass Oarlock Sockets, Side Mt., A:1/2" B: 3-5/8" - 580610-1 - 354-5806101F1
Constructed of traditional, durable sand cast brass. Oarlock mounts accept 1/2" shafts and feature polyethylene inserts (#580699) for smooth rotation.
Seadog 5806001 Brass Oarlock Sockets, Top Mt., Pr. - 580600-1 - 354-5806001F1
Constructed of traditional, durable sand cast brass. Oarlock mounts accept 1/2" shafts and feature polyethylene inserts (#580699) for smooth rotation.
Seadog 5805911 Brass Round Horn Oarlocks, A: 1/2" B: 2-1/8" - 580591-1 - 354-5805911F1
Constructed of traditional, durable sand cast brass. 1/2" shaft. The horns secure the oar in place in all sea conditions.
Seadog 5805901 Brass Round Horn Oarlocks, Pr. - 580590-1 - 354-5805901F1
Constructed of traditional, durable sand cast brass. 1/2" shaft. The horns secure the oar in place in all sea conditions.
Seadog 5805701 Brass Round Horn Oarlocks, Pr. - 580570-1 - 354-5805701F1
Constructed of traditional, durable sand cast brass. 1/2" shaft. The horns secure the oar in place in all sea conditions.
Seadog 563255 Cast 17-4Ph Grade Stainless Adjustable Wrench - Includes 1/4" Hex Head & Bottle Opener - 563255-1 - 354-5632551F1
Stainless steel adjustable wrench is made to last a lifetime under any conditions. Includes, 1/4" hex head and bottle opener. Cast 17-4ph stainless.
Seadog 521664-1 Motor Well Boot - 5-1/2" Split - 521664-1 - 354-5216641F1
Molded rubber/injection molded nylon. Black accordion style seal organizes and protects engine control cables, wires or fuel lines. UV stabilized molded rubber. Boots and rings are cut for trouble free installation without removal of cables. Includes tie wrap. #8 RH Fastener.
Seadog 521663-1 Motor Well Boot - 4-1/8" Split - 521663-1 - 354-5216631F1
Molded rubber/injection molded nylon. Black accordion style seal organizes and protects engine control cables, wires or fuel lines. UV stabilized molded rubber. Boots and rings are cut for trouble free installation without removal of cables. Includes tie wrap. #8 RH Fastener.
Seadog 5216551 Motor Well Boot, 5-1/2" - 521655-1 - 354-5216551F1
Motor Well Boot organizes and protects engine control cables, wires, or fuel lines. Black accordion-style seal. UV stabilized molded rubber. Includes mounting ring. Installs with six #8 RH fasteners (not included).
Seadog 5216301 Motor Well Boot, 3" W/Ring - 521630-1 - 354-5216301F1
Motor Well Boot organizes and protects engine control cables, wires, or fuel lines. Black accordion-style seal. UV stabilized molded rubber. Includes mounting ring. Installs with six #8 RH fasteners (not included).
Seadog 521550 Telescoping 15-1/2" To 24-1/2" Inboard Motor Flusher - Molded Rubber & Aluminum - 521550-1 - 354-5215501F1
Inboard Motor Flush quickly flushes away salt, sand, minerals, and contaminates from your lower unit cooling system extending the engine's service life. Easy-to-use by fitting the rubber cup over the water intake, connecting a garden hose, and extending the aluminum leg to seal the cup to the hull. Fresh water flushes the cooling system, no tools required. Great for winterizing, tune-ups, and other maintenance that requires running an inboard engine out of the water.
Seadog 520060 Captive Garboard Drain & Plug | #8 Fastener | Investment Cast 316 Stainless - 520060 - 354-520060F1
This Captive Garboard Drain & Plug is a direct replacement for the bronze, traditional style Sea-Dog® Garboards (520040 and 520042). Captive plug prevents plug from being lost. Constructed of investment cast 316 stainless steel. Installs with three #8 FH fasteners (not included).
Seadog 502150H1 Lower Unit Standard Pump - 502150H-1 - 354-502150H1F1
Nylon/aluminum. Standard Pump fits quart oil bottles. Flexible hose gets to hard to reach locations. Threaded (3/8"-16) fitting fits Mercruiser, OMC, Evinrude, Johnson, Honda (70hp & up), Volvo, Force, Mercury (US origin models) and Gamefisher lower units. Includes Yamaha adapter (8mm-1.25) fitting for Mercury (Japanese origin models), Yamaha, Nissan, Tohatsu, Honda.
Seadog 5010723 Premium Electric Oil Pump, 12V - 501072-3 - 354-5010723F1
This portable, lightweight Premium Electric Oil Pump is easy to use and transport. The self-priming 12V pump attaches to battery terminals with alligator clips and drains oil through the dipstick tube on outboards and sterndrives. Convenient DIY operation saves money on expensive oil changes. Its compact size makes it is easy to store. Includes 48" inlet and 80" outlet hoses. Oil flow 0.2 liters per minute. Diesel flow 1.5 liters per minute. 12VDC. 60W. Maximum run time 30 minutes.NOT intended for commercial use. NOT suitable for pumping out transmission oil, water, or flammable liquids.
Seadog 492213 Flagpole 10 Degree Socket | #10 Fastener | Sand Cast Brass Chrome Plated - 492213-1 - 354-4922131F1
10° Flagpole Socket is used for flagpoles up to 1-1/4" in diameter. Maximum speed 10 MPH. Constructed of chrome plated sand cast brass for durability and corrosion resistance. Installs with three FH fasteners (not included).
Seadog 491713 Flush Mount 25 Degree Flag Pole Socket | #12 Fastener | Investment Cast 316 Stainless - 491713-1 - 354-4917131F1
25° Flush Mount Flagpole Socket is used for flagpoles up to 1-1/4" in diameter. Maximum speed 10 MPH. Constructed of investment cast 316 stainless. Installs with three #12 FH fasteners (not included).
Seadog 4911081 Boat Hook Hull Scraper - 491108-1 - 354-4911081F1
Boat Hook Hull Scraper can be attached to any Sea-Dog® Boat Hook/Boat Pole or universal/Acme threaded device. Great for waterline cleaning from inside the vessel.
Seadog 491105 Boat Hook Universal Thread 15" Microfiber Mop - 491105-1 - 354-4911051F1
Boat Hook Microfiber Mop provides gentle and effective cleaning action with its soft straps. The fast-drying microfiber is highly absorbent and scratch resistant, preventing water spots. Fits all Sea-Dog® Boat Hooks and universal/Acme threaded devices.
Seadog 432620 Maxblast 20 Amp 125 Db 12V 11 Psi Dual 9-5/8" Trumpet Air Horn - Chrome Plated Brass - 432620-1 - 354-4326201F1
MaxBlast Mini Dual Trumpet Air Horn is constructed of durable chrome plated brass. When installed, the trumpet should point slightly downward to permit water drainage. Display pack includes horn, compressor, air tubing, and mounting hardware. At 125 decibels and a frequency (Hz) of 630±15A/525±15A, this horn meets the US Coast Guard's COLREGS, US Inland Navigation Rules, Annex III Regulations, and ABYC standard A-23 for boats up to 20 meters (66'). 12VDC. Maximum: 20A. NMMA Type Accepted #2577058.
Seadog 432597 Universal 20 Amp 11 Psi 12V Air Horn Compressor With Side Air Exit - Fits Sea-Dog Maxblast Air Horns - 432597-1 - 354-4325971F1
Universal Air Horn Compressor with Side Air Exit works with all Sea-Dog® MaxBlast air horns. For use in tight installation applications where a side air hose attachment is required. Does not include air tubing or mounting hardware. 12VDC. Maximum: 20A.
Seadog 432590 Trumpet Horn Tube Cover | Fits All Sea-Dog Air Horns & Max Blast Electric Trumpet Horns - 432590-1 - 354-4325901F1
Stainless steel trumpet tube cover fits all Sea-Dog air horns and the Max Blast electric trumpet horns. Keeps green water and bugs from getting into the trumpet tube, and snaps over the end of the tube - No tools necessary. 304 Stainless.
Seadog 432520 Maxblast 20 Amp 121 Db 12V 11 Psi Dual 17" Trumpet Air Horn - Chrome Plated Brass - 432520-1 - 354-4325201F1
MaxBlast Dual Trumpet Air Horn is constructed of durable chrome plated brass. When installed, the trumpet should point slightly downward to permit water drainage. Display pack includes horn, compressor, air tubing, and mounting hardware. At 121 decibels and a frequency (Hz) of 375±15A/315±15A, this horn meets the US Coast Guard's COLREGS, US Inland Navigation Rules, Annex III Regulations, and ABYC standard A-23 for boats up to 20 meters (66'). 12VDC. Maximum: 20A. NMMA Type Accepted #2577055.
Seadog 432510 Maxblast 20 Amp 120 Db 12V 11 Psi Single 17" Trumpet Air Horn - Chrome Plated Brass - 432510-1 - 354-4325101F1
MaxBlast Single Trumpet Air Horn is constructed of durable chrome plated brass. When installed, the trumpet should point slightly downward to permit water drainage. Display pack includes horn, compressor, air tubing, and mounting hardware. At 120 decibels and a frequency (Hz) of 315±15A, this horn meets the US Coast Guard's COLREGS, US Inland Navigation Rules, Annex III Regulations, and ABYC standard A-23 for boats up to 20 meters (66'). 12VDC. Maximum: 20A. NMMA Type Accepted #2577054.
Seadog 431620 Compact 7 Amp 112 Db 12V Dual 16" Trumpet Horn - Stamped 304 Stainless - 431620-1 - 354-4316201F1
Compact Dual Trumpet Horn features a prewired, sealed sound unit is constructed of 100% stainless steel exterior with a 304 stainless steel diaphragm. Mounting bracket can be used as a wiring template. When installed, the trumpet should point slightly downward to permit water drainage. At 110 decibels and a frequency (Hz) of 460±15/415±15, this horn meets US Coast Guard's COLREGS and ABYC standard A-23 for use on vessels under 12m (39'). 12VDC. NMMA Type Accepted #2577072.
Seadog 431610 Compact 3.5 Amp 110 Db 12V Single 14" Trumpet Horn - Stamped 304 Stainless - 431610-1 - 354-4316101F1
Compact Single Trumpet Horn features a prewired, sealed sound unit is constructed of 100% stainless steel exterior with a 304 stainless steel diaphragm. Mounting bracket can be used as a wiring template. When installed, the trumpet should point slightly downward to permit water drainage. At 108 decibels and a frequency (Hz) of 460±15A, this horn meets US Coast Guard's COLREGS and ABYC standard A-23 for use on vessels under 12m (39'). 12VDC. NMMA Type Accepted #2577071.
Seadog 431540 Maxblast 5 Amp 123 Db 24V Dual 18-1/4" Trumpet Horn - Stainless & Molded Motor Housing - 431540-1 - 354-4315401F1
MaxBlast Dual Trumpet Air Horn is constructed of durable chrome plated brass. When installed, the trumpet should point slightly downward to permit water drainage. Display pack includes horn, compressor, air tubing, and mounting hardware. At 121 decibels and a frequency (Hz) of 375±15A/315±15A, this horn meets the US Coast Guard's COLREGS, US Inland Navigation Rules, Annex III Regulations, and ABYC standard A-23 for boats up to 20 meters (66'). Maximum: 20A. NMMA Type Accepted #2577055.
Seadog 431530 Maxblast 2.5 Amp 118 Db 24V Single 16" Trumpet Horn - Stainless & Molded Motor Housing - 431530-1 - 354-4315301F1
MaxBlast Single Trumpet Horn features a prewired, sealed sound unit. Constructed with an over molded motor housing under a stamped 304 stainless steel exterior and diaphragm, which protects the internal components from corrosion. After a 600 hour salt spray test, this electric horn was completely rust-free! Horn wiring has no polarity, negative or positive can be attached to either wire. Mounting bracket can be used as a wiring template. When installed, the trumpet should point slightly downward to permit water drainage. At 118 decibels and a frequency (Hz) of 390°15A, this horn meets US Coast Guard's COLREGS and ABYC standard A-23 for use on vessels under 12m (39'). 5-year warranty. NMMA Type Accepted #2577069 & 2577070.
Seadog 431520 Maxblast 10 Amp 123 Db 12V Dual 18-1/4" Trumpet Horn - Stainless & Molded Motor Housing - 431520-1 - 354-4315201F1
MaxBlast Dual Trumpet Air Horn is constructed of durable chrome plated brass. When installed, the trumpet should point slightly downward to permit water drainage. Display pack includes horn, compressor, air tubing, and mounting hardware. At 121 decibels and a frequency (Hz) of 375±15A/315±15A, this horn meets the US Coast Guard's COLREGS, US Inland Navigation Rules, Annex III Regulations, and ABYC standard A-23 for boats up to 20 meters (66'). Maximum: 20A. NMMA Type Accepted #2577055.
Seadog 431510 Maxblast 5 Amp 118 Db 12V Single 16" Trumpet Horn - Stainless & Molded Motor Housing - 431510-1 - 354-4315101F1
MaxBlast Single Trumpet Horn features a prewired, sealed sound unit. Constructed with an over molded motor housing under a stamped 304 stainless steel exterior and diaphragm, which protects the internal components from corrosion. After a 600 hour salt spray test, this electric horn was completely rust-free! Horn wiring has no polarity, negative or positive can be attached to either wire. Mounting bracket can be used as a wiring template. When installed, the trumpet should point slightly downward to permit water drainage. At 118 decibels and a frequency (Hz) of 390°15A, this horn meets US Coast Guard's COLREGS and ABYC standard A-23 for use on vessels under 12m (39'). 5-year warranty. NMMA Type Accepted #2577069 & 2577070.
Seadog 431430-1 Pontoon Boat 12V Mini Compact Horn W/Bracket - 431430-1 - 354-4314301F1
Pontoon Boat Mini Compact Horn with Bracket is constructed of powder coated steel. Includes 304 stainless steel bracket for easy mounting. Recommended for fresh water applications. At 111 decibels and a frequency (Hz) of 370±20A, this horn meets US Coast Guard's COLREGS and ABYC standard A-23 for use on vessels under 12m (39'). 12VDC. NMMA Type Accepted #2601746.
Seadog 431125 Max Blast Twin Mini 6 Amp 12V Compact Horn - Stamped 304 Stainless Cover - 431125-1 - 354-4311251F1
MaxBlast Twin Mini Compact Horn is constructed with an injection molded housing under the stamped 304 stainless steel cover, which protects the the internal components from corrosion. After a 600 hour salt spray test, this electric horn was completely rust-free! Mounting bracket can be used as a wiring template. When installed, horns should point slightly downward to permit water drainage. At 111 decibels and a frequency (Hz) of 490°20A, this horn meets US Coast Guard's COLREGS and ABYC standard A-23 for use on vessels under 12m (39'). 12VDC. Five-year rust-free warranty. 12VDC. NMMA Type Accepted #2577062.
Seadog 4269551 Sae Power Socket, Rear Nut Mount - 426955-1 - 354-4269551F1
The SAE type Polarized Electrical Connector is a two-prong power socket connector set. Great for solar panel connections and maintaining battery charge. 14-gauge duplex wire. Maximum: 20A @ 12VDC. Installs in a 7/8" hole with included locking nut.
Seadog 4269501 Sae Power Socket, Front Mount - 426950-1 - 354-4269501F1
The SAE type Polarized Electrical Connector is a two-prong power socket connector set. Great for solar panel connections and maintaining battery charge. 14-gauge duplex wire. Maximum: 20A @ 12VDC. Installs in a 3/4" hole w/ two #10 RH screws (not included).
Seadog 4269301 Sae Power Cable Power Plug Kit, 6" - 426930-1 - 354-4269301F1
The SAE type Polarized Electrical Plug Kit is a two-prong plug and socket connector set. 14-gauge lead wire with bullet-type contact pins. Includes two plugs, four heat shrink tubes, and four butt connectors allowing you to customize for your application. Max: 20A @ 12VDC.
Seadog 4269201 Sae Power Cable Y-Splitter, 12" - 426920-1 - 354-4269201F1
The SAE type polarized electrical connector is a two-prong plug and socket Y-splitter connector set. 14-gauge duplex wire. Maximum: 20A @ 12VDC.
Seadog 4269121 Sae Power Cable, 12' - 426912-1 - 354-4269121F1
SAE type Polarized Electrical Connector is a two-prong plug and socket connector set. 14-gauge duplex wire. Maximum: 20A @ 12VDC.
Seadog 4269061 Sae Power Cable, 6' - 426906-1 - 354-4269061F1
SAE type Polarized Electrical Connector is a two-prong plug and socket connector set. 14-gauge duplex wire. Maximum: 20A @ 12VDC.
Seadog 4269031 Sae Power Cable, 3' - 426903-1 - 354-4269031F1
SAE type Polarized Electrical Connector is a two-prong plug and socket connector set. 14-gauge duplex wire. Maximum: 20A @ 12VDC.
Seadog 4269011 Sae Power Cable, 1' - 426901-1 - 354-4269011F1
SAE type Polarized Electrical Connector is a two-prong plug and socket connector set. 14-gauge duplex wire. Maximum: 20A @ 12VDC.
Seadog 4265351 Surface Mount Usb 3.0 & Usb-C Power Socket, Oval - 426535-1 - 354-4265351F1
Surface mount USB 3.0 & USB-C Power Socket charges two devices simultaneously. When split, the total 6A output is 3A per side. USB 3.0 features Quick Charging (QC) for supported devices, giving enough power to charge phones, pads, and tablets quickly and efficiently. USB-C features Power Delivery (PD) for faster and more flexible charging. Protective dust cap covers ports when not in use. Constructed of injection molded nylon. Easy installation requires drilling a 3/16" hole for the wire connection, secure to surface with two #6 screws (not included) and snapping concealed fastener cover in place. Output DC: 5V/6A. Input: 8-32VDC. USB-C Watts: 60W@24V. USB 3.0 Watts: 36W@12V. Blue LED illumination. IP65 rating. CE, RoHS compliant.
Seadog 4265311 Surface Mount Usb 3.0 & Usb-C Power Socket, Square - 426531-1 - 354-4265311F1
Surface mount USB 3.0 & USB-C Power Socket charges two devices simultaneously. When split, the total 6A output is 3A per side. USB 3.0 features Quick Charging (QC) for supported devices, giving enough power to charge phones, pads, and tablets quickly and efficiently. USB-C features Power Delivery (PD) for faster and more flexible charging. Protective dust cap covers ports when not in use. Constructed of injection molded nylon. Easy installation requires drilling a 3/16" hole for the wire connection, secure to surface with two #6 screws (not included) and snapping concealed fastener cover in place. Output DC: 5V/6A. Input: 8-32VDC. USB-C Watts: 60W@24V. USB 3.0 Watts: 36W@12V. Blue LED illumination. IP65 rating. CE, RoHS compliant.
Seadog 426520 Double Usb 12V To 24V Input Rocker Switch Power Socket - 426520-1 - 354-4265201F1
Dual USB Rocker Switch Style Power Socket charges two devices simultaneously. Fits into any 13/16" x 1-7/16" rocker switch hole. The total output 4.8A load is split 2.4A per side as needed. Enough power to charge phones, pads, and tablets quickly and efficiently. Protective dust cap extends the life of the charger. Constructed of injection molded nylon. Output DC 5V/4.8A. Input 12-24VDC. Blue LED illumination. IP65 rating.
Seadog 4265191 Rainbow Volt Meter W/Usb 3.0 & Usb-C Power Socket - 426519-1 - 354-4265191F1
Rainbow Volt Meter with USB 3.0 & USB-C Power Socket charges two devices simultaneously while the rainbow dial displays voltage status. The total output 6A load is split 3A per side as needed. USB 3.0 features Quick Charging (QC) for supported devices, giving enough power to charge phones, pads, and tablets quickly and efficiently. USB-C features Power Delivery (PD) for fast and flexible charging. Protective dust cap extends the life of the charger. The rainbow display gives the user quick, visual, color-coded voltage information. (Red/orange: voltage is too low. Green: normal). Reads voltage up to 14.6 volts. Includes On/Off button to conserve battery power when not needed. Constructed of injection molded nylon. Installation is as easy as drilling a 1-1/8" hole, inserting the socket body, tightening the locking nut, and connecting the wires. Also fits Sea-Dog® Power Socket Shell (426100). Output DC: 5V/6A. Input: 8-32 VDC. IP65 rating. RoHS compliant.
Seadog 4265151 Double Usb 12V - 24V Input Power Socket - 426515-1 - 354-4265151F1
Dual USB Power Socket charges two devices simultaneously. The total output 4.8A load is split 2.4A per side as needed. Enough power to charge phones, pads, and tablets quickly and efficiently. Protective dust cap extends the life of the charger. Also fits Sea-Dog® Power Socket Shell (426100). Constructed of injection molded nylon. Output DC 5V/4.8A. Input 12-24VDC. Blue LED illumination. IP65 rating.
Seadog 4265131 Double Usb Power Plug W/Voltage & Amp Meter - 426513-1 - 354-4265131F1
Double USB Power Plug charges two devices simultaneously while the LCD screen displays charging status in amps, battery voltage, and low voltage audible alarm. The total output 4.8A load is split 2.4A per side as needed. Enough power to charge phones, pads, and tablets quickly and efficiently. Can be used on a boat, car, or RV. This portable version fits all Sea-Dog® Power Sockets and any standard 12V receptacle. Constructed of stamped stainless steel and injection molded nylon. Output DC 5V/4.8A. Input 12-24VDC. Blue LED display.
Seadog 426262 Polarized 3 Amp 2 Pin Electrical Outlet | #6 Fastener | Cast Brass & Chrome Plated - 426262-1 - 354-4262621F1
Constructed of chrome plated brass. For use as a 2-conductor deck cable outlet. Includes a rubber gasket and water resistant cap. 3-5A. Installs with two #6 RH fasteners (not included).
Seadog 4261421 Chrome Brass Polarized Cable Outlet & Plug - 426142-1 - 354-4261421F1
Polarized Electrical Outlet is constructed of chrome plated cast brass. For use as a 2-conductor deck cable outlet. Includes a rubber gasket and water resistant cap. 3A. 12 or 24VDC. Installs with two #6 RH fasteners (not included).
Seadog 4261061 Power Socket Rear Boot - 426106-1 - 354-4261061F1
PVC cover fits all power sockets and power socket meters. Protects wire connections and provides a finished appearance.
Seadog 4260131 Chrome Power Socket - 426013-1 - 354-4260131F1
Power Socket with Plate is ideal for installing additional power outlets. Chrome socket with a stamped 304 stainless steel mounting plate. Maximum: 12VDC, 16A. Installs with two #8 RH fasteners (not included).
Seadog 4216451 Dual Volt/Amp Meter - Rocker Switch Style - 421645-1 - 354-4216451F1
This rocker switch style dual volt/amp meter monitors and displays the voltage and amps simultaneously. Fits into any 13/16" X 1-7/16" rocker switch hole. Digital red LED display. Input 6-30VDC. IP65 rating.
Seadog 414900-3 Complete Windshield Washer 12V Kit | #10 Fastener - 414900-3 - 354-4149003F1
Comes complete with everything needed for a new installation. Includes tank with pump, wiring harness for the pump motor connection, toggle switch, 15' of clear tubing, hose barb tee, two spray nozzles and mounting bracket with fasteners. Tank capacity is 2.5 liters/2.66 quarts. Fastener #10 RH.
Seadog 413054B-1 Premium Wiper Arm For Standard Motors, Black - 413054B-1 - 354-413054B1F1
Formed 304 stainless steel. Premium stainless steel wiper arm for use on standard motors (412321B-3, 412328B-3) and waterproof standard wiper motors (412321W-3, 412328W-3) with 3/8" shaft diameter.
Seadog 371840 Flush Mount Ski Tow | 3/8" Thread Diameter | Investment Cast 316 Stainless - 371840 - 354-371840F1
Flush mount ski tow designed to give your transom an updated look. Stud centers will allow direct replacement of the most popular standard ski tow. Includes backing plate.
Seadog 3570331 Deck Fill -Water - 357033-1 - 354-3570331F1
Constructed of fiberglass filled injection molded nylon. Contains no metal and does not require grounding. Has a special cap with a built-in key for easy cap removal. The hinged key can be locked in the upright position to open or close the fill and then recessed into the cap for a flush surface. 1-1/4" © 11-1/2 NPSM straight cap threads. Installs with three #10 FH fasteners (not included). Will not work with pressurized oil injection systems. Connect deck fill to reservoir via hose (not included).
Seadog 357033 Keyless Deck Fill-Water - 357033 - 354-357033F1
Constructed of fiberglass filled injection molded nylon. Contains no metal and does not require grounding. Has a special cap with a built-in key for easy cap removal. The hinged key can be locked in the upright position to open or close the fill and then recessed into the cap for a flush surface. 1-1/4" © 11-1/2 NPSM straight cap threads. Installs with three #10 FH fasteners (not included). Will not work with pressurized oil injection systems. Connect deck fill to reservoir via hose (not included).
Seadog 3570311 Deck Fill - Diesel - 357031-1 - 354-3570311F1
Constructed of fiberglass filled injection molded nylon. Contains no metal and does not require grounding. Has a special cap with a built-in key for easy cap removal. The hinged key can be locked in the upright position to open or close the fill and then recessed into the cap for a flush surface. 1-1/4" © 11-1/2 NPSM straight cap threads. Installs with three #10 FH fasteners (not included). Will not work with pressurized oil injection systems. Connect deck fill to reservoir via hose (not included).
Seadog 3570301 Gas Deckfill W/Keyless Cap - 357030-1 - 354-3570301F1
Constructed of fiberglass filled injection molded nylon. Contains no metal and does not require grounding. Has a special cap with a built-in key for easy cap removal. The hinged key can be locked in the upright position to open or close the fill and then recessed into the cap for a flush surface. 1-1/4" © 11-1/2 NPSM straight cap threads. Installs with three #10 FH fasteners (not included). Will not work with pressurized oil injection systems. Connect deck fill to reservoir via hose (not included).
Seadog 3570001 Black Nylon Fill Body W/O Cap - 357000-1 - 354-3570001F1
Constructed of fiberglass filled injection molded nylon. Contains no metal and does not require grounding. Has a special cap with a built-in key for easy cap removal. The hinged key can be locked in the upright position to open or close the fill and then recessed into the cap for a flush surface. 1-1/4" © 11-1/2 NPSM straight cap threads. Installs with three #10 FH fasteners (not included). Will not work with pressurized oil injection systems. Connect deck fill to reservoir via hose (not included).
Seadog 340041 Deck Drain 5-5/8" White Abs - 340041 - 354-340041F1
Deck Drains are constructed of injection molded ABS. Designed to drain water from floors of bass, pontoon, and other open deck boats. May also be used to vent lockers, refrigerator cabinets, or as a grille for enclosed horns and speakers. Avoid contact with acetone or strong solvents.
Seadog 3400401 Deck Drain 5-5/8" Black Abs - 340040-1 - 354-3400401F1
Deck Drains are constructed of injection molded ABS. Designed to drain water from floors of bass, pontoon, and other open deck boats. May also be used to vent lockers, refrigerator cabinets, or as a grille for enclosed horns and speakers. Avoid contact with acetone or strong solvents.
Seadog 3400211 Deck Drain 4-3/16" White Abs - 340021-1 - 354-3400211F1
Deck Drains are constructed of injection molded ABS. Designed to drain water from floors of bass, pontoon, and other open deck boats. May also be used to vent lockers, refrigerator cabinets, or as a grille for enclosed horns and speakers. Avoid contact with acetone or strong solvents.
Seadog 3400201 Deck Drain 4-3/16" Black Abs - 340020-1 - 354-3400201F1
Deck Drains are constructed of injection molded ABS. Designed to drain water from floors of bass, pontoon, and other open deck boats. May also be used to vent lockers, refrigerator cabinets, or as a grille for enclosed horns and speakers. Avoid contact with acetone or strong solvents.
Seadog 3361651 Smooth Finish Quarter-Turn Deck Plate, Black,A:6-1/2" , B:8-1/8", C:6-1/2", D:7-3/8" - 336165-1 - 354-3361651F1
Sea-Dog's Quarter-Turn Deck Plate is UV stabilized and features a locking system that prevents over tightening, jamming and cross threading. Easy to open and close. A specially engineered lubricated gasket is used in conjunction with a knife edge for a leak tested seal. Injection molded ABS/polycarbonate. Note: Avoid contact with acetone or strong solvents.
Seadog 3361571 Smooth Finish Quarter-Turn Deck Plate, Black,, A: 5-1/2" , B:6-3/4", C:5-3/8", D:6-1/8" - 336157-1 - 354-3361571F1
Sea-Dog's Quarter-Turn Deck Plate is UV stabilized and features a locking system that prevents over tightening, jamming and cross threading. Easy to open and close. A specially engineered lubricated gasket is used in conjunction with a knife edge for a leak tested seal. Injection molded ABS/polycarbonate. Note: Avoid contact with acetone or strong solvents.
Seadog 3361551 Smooth Finish Quarter-Turn Deck Plate, Black, , A: 5-1/2" , B:6-3/4", C:5-3/8", D:6-1/8" - 336155-1 - 354-3361551F1
Sea-Dog's Quarter-Turn Deck Plate is UV stabilized and features a locking system that prevents over tightening, jamming and cross threading. Easy to open and close. A specially engineered lubricated gasket is used in conjunction with a knife edge for a leak tested seal. Injection molded ABS/polycarbonate. Note: Avoid contact with acetone or strong solvents.
Seadog 3361521 Smooth Finish Quarter-Turn Deck Plate, White, , A: 5-1/2" , B:6-3/4", C:5-3/8", D:6-1/8" - 336152-1 - 354-3361521F1
Sea-Dog's Quarter-Turn Deck Plate is UV stabilized and features a locking system that prevents over tightening, jamming and cross threading. Easy to open and close. A specially engineered lubricated gasket is used in conjunction with a knife edge for a leak tested seal. Injection molded ABS/polycarbonate. Note: Avoid contact with acetone or strong solvents.
