Lines & Rigging
Seadog 3361501 Smooth Finish Quarter-Turn Deck Plate, White,, A: 5-1/2" , B:6-3/4", C:5-3/8", D:6-1/8" - 336150-1 - 354-3361501F1
Sea-Dog's Quarter-Turn Deck Plate is UV stabilized and features a locking system that prevents over tightening, jamming and cross threading. Easy to open and close. A specially engineered lubricated gasket is used in conjunction with a knife edge for a leak tested seal. Injection molded ABS/polycarbonate. Note: Avoid contact with acetone or strong solvents.
Seadog 3361401, Smooth Finish Quarter-Turn Deck Plate,White,, A:4-1/2" , B:6-1/8", C:4-1/2", D:5-3/8 - 336140-1 - 354-3361401F1
Sea-Dog's Quarter-Turn Deck Plate is UV stabilized and features a locking system that prevents over tightening, jamming and cross threading. Easy to open and close. A specially engineered lubricated gasket is used in conjunction with a knife edge for a leak tested seal. Injection molded ABS/polycarbonate. Note: Avoid contact with acetone or strong solvents.
Seadog 335680 Adjustable Bronze Deck Plate Key - 6" Max Opening - 335680-1 - 354-3356801F1
Opens to a max of 6" and comes with two sizes of stainless steel pins 3/16" and 5/16" allowing it to fit most plates or caps. Satin finished bronze. Heavy duty constructionGreat addition to every tool boxCorrosion resistant
Seadog 3314101 Louvered Vent, 9" H X 5" W - 331410-1 - 354-3314101F1
Promotes air circulation to prevent mold, mildew and unpleasant odors. Use on cabin doors, lockers, dock boxes, etc. Install with #6 RH fasteners (not included). Corrosion resistant stamped 304 stainless steel construction.
Seadog 3314001 Louvered Vent, 9-1/8" H X 4-5/8" W - 331400-1 - 354-3314001F1
Promotes air circulation to prevent mold, mildew and unpleasant odors. Use on cabin doors, lockers, dock boxes, etc. Install with #6 RH fasteners (not included). Corrosion resistant stamped 304 stainless steel construction.
Seadog 3313901 Louvered Vent, 5" H X 4-5/8" W - 331390-1 - 354-3313901F1
Promotes air circulation to prevent mold, mildew and unpleasant odors. Use on cabin doors, lockers, dock boxes, etc. Install with #6 RH fasteners (not included). Corrosion resistant stamped 304 stainless steel construction.
Seadog 3313801 Louvered Vent, 2-5/8" H X 5" W - 331380-1 - 354-3313801F1
Promotes air circulation to prevent mold, mildew and unpleasant odors. Use on cabin doors, lockers, dock boxes, etc. Install with #6 RH fasteners (not included). Corrosion resistant stamped 304 stainless steel construction.
Seadog 328112 Adjustable 17" Bow Form Flagpole - 328112-1 - 354-3281121F1
Highly polished, heavy wall stainless steel tubing with injection molded nylon and polypropylene fittings. The flag is attached to the flag pole using nylon adjustable flag pole clips in conjunction with stainless steel spring wire quick release clips allowing mounting flexibility for a variety of flag or pennant sizes. Maximum safe speed 10 MPH.
Seadog 328076 Large Platform Bow Roller | 1-1/2" Max Rope Diameter | 3/8" Bolt Fastener - 328076 - 354-328076F1
These corrosion resistant stamped 304 stainless steel Large Platform Bow Rollers are designed to handle most fluke style anchors and mount in or under the anchor slot of a platform or bow plank. The rubber wheel accommodates rope up to 1-1/2" in diameter. Installs with six 3/8" bolts (not included).
Seadog 328068 Pivoting Medium Bow Roller | 1-1/2" Max Rope Diameter | 3/8" Bolt Fastener - 328068 - 354-328068F1
These corrosion resistant stamped 304 stainless steel Pivoting Medium Bow Rollers are designed to create a self-launching anchor system. As the anchor line is played out, the anchor roller pivots downward under the weight of the anchor, allowing it to fall freely into the water. The rubber wheel accommodates rope up to 1-1/2" in diameter. Installs with 3/8" bolts (not included).
Seadog 328057 Medium Fairlead Bow Roller | 1" Max Rope Diameter | 3/8" Bolt Fastener - 328057 - 354-328057F1
These corrosion resistant stamped 304 stainless steel Fairlead Bow Rollers are easy to use and reduces the risk of damage to the hull or deck. The rubber wheels accommodate rope up to 1" in diameter. Installs with 3/8" bolts (not included).
Seadog 328054 Unpolished Seahook Style Bow Roller | 1" Max Rope Diameter | 3/8" Bolt Fastener - 328054 - 354-328054F1
These corrosion resistant stamped 304 stainless steel Fairlead Bow Rollers are easy to use and reduces the risk of damage to the hull or deck. The rubber wheels accommodate rope up to 1" in diameter. Installs with 3/8" bolts (not included).
Seadog 328053 Unpolished Long Bow Roller | 1" Max Rope Diameter | 3/8" Bolt Fastener - 328053 - 354-328053F1
These corrosion resistant stamped 304 stainless steel Fairlead Bow Rollers are easy to use and reduces the risk of damage to the hull or deck. The rubber wheels accommodate rope up to 1" in diameter. Installs with 3/8" bolts (not included).
Seadog 328052 Unpolished Short Bow Roller | 1" Max Rope Diameter | 3/8" Bolt Fastener - 328052 - 354-328052F1
These corrosion resistant stamped 304 stainless steel Short Bow Rollers make dropping and weighing anchor a breeze. Easy to use, it reduces the risk of damage to the hull or deck. The rubber wheel accommodates rope up to 1" in diameter. Installs with three 3/8" bolts (not included).
Seadog 328051 Platform Bow Roller | 1" Max Rope Diameter | 3/8" Bolt Fastener - 328051 - 354-328051F1
These corrosion resistant stamped 304 stainless steel Platform Bow Rollers are designed to handle most fluke style anchors using a variety of platform or bowsprit mounting options. The flanges hold the flukes of the anchor securely, reducing the risk of damage to the hull. The rubber wheel accommodates rope up to 1" in diameter. Installs with four 3/8" bolts (not included).
Seadog 327175 Rail Mount 9" Rod Holder | Fits 7/8" To 1" Tubing - 327175-1 - 354-3271751F1
Rail mount 9" rod holder designed with a front mount adjustment screw. Allows for easy adjustment without having to disassemble the rail mount brackets. A safety line on the rod and or reel is recommended when using rail mount rod holders.
Seadog 327130 Rail Mount Ring Buoy Bracket - Fits 7/8" Or 1" Tubing Or Direct Mount - 327130-1 - 354-3271301F1
The Sea-Dog® Rail Mount Ring Buoy Bracket can be used on 7/8" or 1" tubing or mounted directly to a flat surface. Comes complete with all necessary hardware. Made from marine grade stamped aluminum and powder coated for a long-lasting finish.
Seadog 3265853 Fillet & Prep Table - 326585-3 - 354-3265853F1
Solid one piece construction for long lifeUV stabilized high-density polyethylene
Seadog 3254251 Triple Threat™ Rod Holder - Track Mount W/ Extension, Black - 325425-1 - 354-3254251F1
The Triple Threat™ Rod Holder is your one stop for all your reel styles: Spin, bait, cast, or fly. The addition of our 6" extension gives you more room in the cockpit and clearance for pedal drives. The quarter turn knob allows for easy adjusting of the angle of the rod with a quick twist. The rear bail facilitates vertical storage of rods while moving from one location to another. Attachment points on the base give you a solid clip point for leashing your rod and reel while paddling in rough conditions. This rod holder is supplied with a track mount base that is designed to attach to all popular brands of track. Constructed of injection molded glass filled nylon. The rod holder is interchangeable with either surface mount or track mount bases.
Seadog 3254161 Triple Threat™ Rod Holder - Track Mount, Black - 325416-1 - 354-3254161F1
The Triple Threat™ Rod Holder is your one stop for all your reel styles: Spin, bait cast, or fly. The quarter turn knob allows for easy adjusting of the angle of the rod with a quick twist. The rear bail facilitates vertical storage of rods while moving from one location to another. Attachment points on the base give you a solid clip point for leashing your rod and reel while paddling in rough conditions. This rod holder is supplied with a track mount base that is designed to attach to all popular brands of track. The rod holder is interchangeable with either surface mount or track mount bases. Constructed of injection molded glass filled nylon.
Seadog 3254121 Triple Threat™ Rod Holder - Surface Mount, Black - 325412-1 - 354-3254121F1
The Triple Threat™ Rod Holder is your one stop for all your reel styles: Spin, bait, cast, or fly. The quarter turn knob allows for easy adjusting of the angle of the rod with a quick twist. The rear bail facilitates vertical storage of rods while moving from one location to another. Attachment points on the base give you a solid clip point for leashing your rod and reel while paddling in rough conditions. Comes supplied with a surface mount base designed to be fastened directly to the boat. The rod holder is interchangeable with either surface mount or track mount bases. Constructed of injection molded glass filled nylon. Fasteners not included.
Seadog 325235 Flush Mount Rod Holder & Cap, Investment Cast 316 Stainless - 325235-1 - 354-3252351F1
The unique design of the cast stainless mounting flange accommodates a gasket reducing leakage common on other cast rod holders. This Flush Mount Rod Holder with Cap is constructed of corrosion resistant investment cast 316 stainless steel with a UV resistant PVC cap and full length PE liner. Features a 30° angle. Accommodates rods up to 1-1/2". Installs with three #12 FH fasteners (not included). This new design has the same liner and cap that is used on the stamped stainless steel rod holder (325175).
Seadog 325190 Side Mount 9" Rod Holder | Formed 316 Stainless | #10 Fastener - 325190-1 - 354-3251901F1
Side Mount Rod Holder slides in and out of mounting plate for a lower profile with not in use. Constructed of formed 316 stainless steel with mounting plate. Features a 30° angle. Accommodates rods up to 1-13/16". Installs with four #10 FH fasteners (not included).
Seadog 325161 Plastic Flush Mount Rod Holder, Flat Dark Earth - 325166-1 - 354-325161F1
Flush Mount Rod Holders are constructed of injection molded ABS. Features a 30° angle. Accommodates rods up to 1-5/8". Installs with three #12 FH fasteners (not included).
Seadog 3251601 Plastic Flush Mount Rod Holder, Black - 325160-1 - 354-3251601F1
Flush Mount Rod Holders are constructed of injection molded ABS. Features a 30° angle. Accommodates rods up to 1-5/8". Installs with three #12 FH fasteners (not included).
Seadog 3251231 Side Mount Rod Holder, Flat Dark Earth - 325123-1 - 354-3251231F1
Constructed of injection molded polypropylene these Side Mount Rod Holders feature an integral, molded-in standoff. Located on the back of the rod holder this standoff allows direct mounting to any flat surface. Accommodates rods up to 1-3/4" in diameter. Installs with two #10 RH fasteners (not included).
Seadog 3251211 Side Mount Rod Holder, White - 325121-1 - 354-3251211F1
Constructed of injection molded polypropylene these Side Mount Rod Holders feature an integral, molded-in standoff. Located on the back of the rod holder this standoff allows direct mounting to any flat surface. Accommodates rods up to 1-3/4" in diameter. Installs with two #10 RH fasteners (not included).
Seadog 3251201 Side Mount Rod Holder, Black - 325120-1 - 354-3251201F1
Constructed of injection molded polypropylene these Side Mount Rod Holders feature an integral, molded-in standoff. Located on the back of the rod holder this standoff allows direct mounting to any flat surface. Accommodates rods up to 1-3/4" in diameter. Installs with two #10 RH fasteners (not included).
Seadog 3250341 Triple Threat™ Three Pole Rod Holder, Flat Dark Earth - 325034-1 - 354-3250341F1
The Triple Threat™ Three Pole Rod Holder combines functionality with the ability to hold bait, cast, or fly fishing rods/reels. These rod holders come equipped with a built-in knife and plier storage along with holders that can accommodate up to 16 different fishing lures. Several key features unique to our patent pending design include: Accessory Track Mounting System™, scent bottle storage, as well as four leash and two bungee cord attachment points. Accommodates rods up to 1-3/4" in diameter. Constructed of one-piece injection molded, UV stabilized polypropylene. No assembly required. Requires four #8 fasteners (included in display packed product). A must have for any boat, kayak, or dock! Made in USA with recycled materials.
Seadog 3250331 Triple Threat™ Three Pole Rod Holder, Black - 325033-1 - 354-3250331F1
The Triple Threat™ Three Pole Rod Holder combines functionality with the ability to hold bait, cast, or fly fishing rods/reels. These rod holders come equipped with a built-in knife and plier storage along with holders that can accommodate up to 16 different fishing lures. Several key features unique to our patent pending design include: Accessory Track Mounting System™, scent bottle storage, as well as four leash and two bungee cord attachment points. Accommodates rods up to 1-3/4" in diameter. Constructed of one-piece injection molded, UV stabilized polypropylene. No assembly required. Requires four #8 fasteners (included in display packed product). A must have for any boat, kayak, or dock! Made in USA with recycled materials.
Seadog 3250321 Triple Threat™ Three Pole Rod Holder, White - 325032-1 - 354-3250321F1
The Triple Threat™ Three Pole Rod Holder combines functionality with the ability to hold bait, cast, or fly fishing rods/reels. These rod holders come equipped with a built-in knife and plier storage along with holders that can accommodate up to 16 different fishing lures. Several key features unique to our patent pending design include: Accessory Track Mounting System™, scent bottle storage, as well as four leash and two bungee cord attachment points. Accommodates rods up to 1-3/4" in diameter. Constructed of one-piece injection molded, UV stabilized polypropylene. No assembly required. Requires four #8 fasteners (included in display packed product). A must have for any boat, kayak, or dock! Made in USA with recycled materials.
Seadog 322620 Sand Cast Brass Chrome Plated Folding Step | #12 Fastener - 322620-1 - 354-3226201F1
Sand cast brass folding step with chrome plated finish. Use #12 fastener.
Seadog 2999811 Straight Release Pin W/Lanyard - 299981-1 - 354-2999811F1
Release Pins feature a quick release with detent ball. Attached lanyard reduces risk of loss. Constructed of corrosion resistant formed 304 stainless steel.
Seadog 299981 Straight Release Pin W/Lanyard, Bulk - 299981 - 354-299981F1
Release Pins feature a quick release with detent ball. Attached lanyard reduces risk of loss. Constructed of corrosion resistant formed 304 stainless steel.
Seadog 2999801 Stepped Release Pin W/Lanyard - 299980-1 - 354-2999801F1
Release Pins feature a quick release with detent ball. Stepped version fits threaded hinge fittings. Attached lanyard reduces risk of loss. Constructed of corrosion resistant formed 304 stainless steel.
Seadog 2991251 S.S. Windshield Clip, 4 Sets - 299125-1 - 354-2991251F1
Nickel plated brass canvas fasteners. Excellent snap action and holding strength. Easy Installation.
Seadog 2991241 S.S. Windshield Clip, 4 Sets - 299124-1 - 354-2991241F1
Nickel plated brass canvas fasteners. Excellent snap action and holding strength. Easy Installation.
Seadog 299120 Canvas Snap Hand Punch & Base, Nickel Plated Brass - 299120-1 - 354-2991201F1
Nickel plated brass canvas fasteners. Excellent snap action and holding strength. Easy Installation.
Seadog 2991041 Canvas Stud (#8 Wood Screw), Nickel Plated Brass, 5 Sets - 299104-1 - 354-2991041F1
Nickel plated brass canvas fasteners. Excellent snap action and holding strength. Easy Installation.
Seadog 2991011 Canvas Socket & Back Plate, Nickel Plated Brass, 3 Sets - 299101-1 - 354-2991011F1
Nickel plated brass canvas fasteners. Excellent snap action and holding strength. Easy Installation.
Seadog 295111 Bow Form, 316 Stainless, 1" - 295111-1 - 354-2951111F1
These Hand Rail Tees are constructed of investment cast 316 stainless steel for corrosion resistance and durability. Includes set screws where appropriate. Designed for use with 1" OD stainless tubing with a wall thickness of 0.049".
Seadog 2931001 3-Way Corner, 7/8", 316 Stainless - 293100-1 - 354-2931001F1
These Hand Rail Tees are constructed of investment cast 316 stainless steel for corrosion resistance and durability. Includes set screws where appropriate. Designed for use with 7/8" stainless tubing with a wall thickness of 0.049".
Seadog 2809011 90° Round Base 1", Stainless - 280901-1 - 354-2809011F1
Constructed of investment cast 316 stainless steel for corrosion resistance and durability. Includes set screws where appropriate. Installs with fasteners, not included.
Seadog 2809001 90° Round Rail Base 7/8", Stainless - 280900-1 - 354-2809001F1
Constructed of investment cast 316 stainless steel for corrosion resistance and durability. Includes set screws where appropriate. Installs with fasteners, not included.
Seadog 2806011 60° Round Base 1", Stainless - 280601-1 - 354-2806011F1
Constructed of investment cast 316 stainless steel for corrosion resistance and durability. Includes set screws where appropriate. Installs with fasteners, not included.
Seadog 2806001 60° Round Rail Base 7/8", Stainless - 280600-1 - 354-2806001F1
Constructed of investment cast 316 stainless steel for corrosion resistance and durability. Includes set screws where appropriate. Installs with fasteners, not included.
Seadog 2804511 45° Round Base 1", Stainless - 280451-1 - 354-2804511F1
Constructed of investment cast 316 stainless steel for corrosion resistance and durability. Includes set screws where appropriate. Installs with fasteners, not included.
Seadog 2804501 45° Round Base 7/8", Stainless - 280450-1 - 354-2804501F1
Constructed of investment cast 316 stainless steel for corrosion resistance and durability. Includes set screws where appropriate. Installs with fasteners, not included.
Seadog 2803011 30° Round Base 1", Stainless - 280301-1 - 354-2803011F1
Constructed of investment cast 316 stainless steel for corrosion resistance and durability. Includes set screws where appropriate. Installs with fasteners, not included.
Seadog 2803001 30° Round Base 7/8", Stainless - 280300-1 - 354-2803001F1
Constructed of investment cast 316 stainless steel for corrosion resistance and durability. Includes set screws where appropriate. Installs with fasteners, not included.
Seadog 2736651 Slide Bracket 2/Cd - 273665-1 - 354-2736651F1
One component of a system of injection molded nylon jaw slide and bracket fittings in a Bimini top fitting system. They are are designed to mount on the side of the gunnel and have the jaw slide snap onto it. The jaw slide then glides along the bracket and is adjusted and secured by the head screw.
Seadog 2736601 Slide Bracket 2/Cd - 273660-1 - 354-2736601F1
One component of a system of injection molded nylon jaw slide and bracket fittings in a Bimini top fitting system. They are are designed to mount on the side of the gunnel and have the jaw slide snap onto it. The jaw slide then glides along the bracket and is adjusted and secured by the head screw.
Seadog 2735681 Head Screw 2/Cd - 273568-1 - 354-2735681F1
One component of a system of injection molded nylon jaw slide and bracket fittings in a Bimini top fitting system. They are are designed to mount on the side of the gunnel and have the jaw slide snap onto it. The jaw slide then glides along the bracket and is adjusted and secured by the head screw. 1/4-28 x 3/4" thread.
Seadog 2735651 Jaw Slide Bracket Mount 2/Cd - 273565-1 - 354-2735651F1
One component of a system of injection molded nylon jaw slide and bracket fittings in a Bimini top fitting system. They are are designed to mount on the side of the gunnel and have the jaw slide snap onto it. The jaw slide then glides along the bracket and is adjusted and secured by the head screw.
Seadog 2702401 Ss Rail Mount Deck Hinge, 1Ea - 270240-1 - 354-2702401F1
These Top Mount Hinge Fittings are designed to mount horizontally and attach an eye end in Bimini top applications. Concave Hinges are designed to rail mount on 1" tubing. These hinges install with two #10 FH fasteners (not included).
Seadog 2702401 Ss Deck Hinge (Rail Mount) W/Removable Pin, 1Ea - 270245-1 - 354-2702451F1
These Top Mount Hinge Fittings are designed to mount horizontally and attach an eye end in Bimini top applications. Concave Hinges are designed to rail mount on 1" tubing. Pin Deck Hinges feature a spring loaded quick release pin for easy top removal. These hinges install with two #10 FH fasteners (not included).
Seadog 2542181 Stud Mount Flanged Grab Rail, Stainless, 19-3/8" - 254218-1 - 354-2542181F1
The stud mounted grab rail features integral 5/16"-18 threaded studs and installs with two 5/16"-18 nuts (not included). Formed of 7/8" 304 stainless steel for corrosion resistance, the design features flanged ends to provide a larger mounting surface for greater durability. Functional and attractive with no mounting hardware visible.
Seadog 254212 Stud Mount Flanged Grab Rail, Stainless, 13-1/2" - 254212-1 - 354-2542121F1
The stud mounted grab rail features integral 5/16"-18 threaded studs and installs with two 5/16"-18 nuts (not included). Formed of 7/8" 304 stainless steel for corrosion resistance, the design features flanged ends to provide a larger mounting surface for greater durability. Functional and attractive with no mounting hardware visible.
Seadog 2542091 Stud Mount Flanged Grab Rail, Stainless, 10" - 254209-1 - 354-2542091F1
The stud mounted grab rail features integral 5/16"-18 threaded studs and installs with two 5/16"-18 nuts (not included). Formed of 7/8" 304 stainless steel for corrosion resistance, the design features flanged ends to provide a larger mounting surface for greater durability. Functional and attractive with no mounting hardware visible.
Seadog 2272621 Nylon Step Handle, Flat Dark Earth - 227262-1 - 354-2272621F1
These UV resistant injection molded nylon Step Handles are designed for use as a lift handle on small boat transoms. Molded with a contoured handle grip, the flat, textured upper surface also allows these handles to be used as a step. Installs with four 1/4" RH fasteners (not included).
Seadog 2272601 Nylon Step Handle, Black - 227260-1 - 354-2272601F1
These UV resistant injection molded nylon Step Handles are designed for use as a lift handle on small boat transoms. Molded with a contoured handle grip, the flat, textured upper surface also allows these handles to be used as a step. Installs with four 1/4" RH fasteners (not included).
Seadog 225420-1 Push Button Cabinet Latch, Rectangular - 225420-1 - 354-2254201F1
Investment Cast 316 Stainless Steel/Chrome Plated Brass. These corrosion resistant 316 stainless steel cabinet latches function as both a latch and handle. Push button operation activates and secures the latch with a simple, deliberate motion. Positive action locking function prevents cabinets from opening while in motion. Easy installation single 3/4" hole to bore. Suitable for left or right-hand side uses. Sleek low-profile design makes them convenient in tight spaces. Great for glove compartments. Includes catch.
Seadog 225400-1 Push Button Cabinet Latch, Oval - 225400-1 - 354-2254001F1
Investment Cast 316 Stainless Steel/Chrome Plated Brass. These corrosion resistant 316 stainless steel cabinet latches function as both a latch and handle. Push button operation activates and secures the latch with a simple, deliberate motion. Positive action locking function prevents cabinets from opening while in motion. Easy installation single 3/4" hole to bore. Suitable for left or right-hand side uses. Sleek low-profile design makes them convenient in tight spaces. Great for glove compartments. Includes catch.
Seadog 225320 Push Button Rim Latch - Square / Round | Stainless/Plastic Housing - 225320-1 - 354-2253201F1
Constructed of sturdy plastic with a corrosion resistant 304 stainless steel knob. Streamlined design features a positive action closure ensuring cabinets and drawers stay closed until the button is deliberately pushed. . Latch installs with two #6 RH fasteners; strike plates require two #4 FH fasteners (fasteners not included).
Seadog 225310 Push Button Rim Latch - Square | Stainless/Plastic Housing - 225310-1 - 354-2253101F1
Constructed of sturdy plastic with a corrosion resistant 304 stainless steel knob. Streamlined design features a positive action closure ensuring cabinets and drawers stay closed until the button is deliberately pushed. . Latch installs with two #6 RH fasteners; strike plates require two #4 FH fasteners (fasteners not included).
Seadog 2253001 Push Button Rim Latch, A: 1-15/16" , B:1-7/8", C:2-1/16", D:1", #6 Rh - 225300-1 - 354-2253001F1
Housings feature a streamlined, positive action closure, ensuring cabinets and drawers stay closed until the button is deliberately pushed. Suitable for left-side or right-side use. Mortise mount for a sleek, finished appearance. Constructed of sturdy plastic with a corrosion resistant 304 stainless steel knob. Latch installs with two #6 RH fasteners, strike plates require two #4 FH fasteners (fasteners not included). Display version comes with both flat and 90° strike plates for inset or overlay mounting.
Seadog 222710 Door Stop & Catch, Stainless, 2" X 2-1/2" - 221710-1 - 354-2217101F1
Door stop holds the door securely against the rubber stop effectively reducing rattling common with most door hooks. The spring-loaded latch allows for quick and easy release. Constructed of 316 investment cast stainless for corrosion resistance and durability. Installs with five #6 FH fasteners (not included).
Seadog 222710 Door Stop & Catch, Cast Brass, 2" X 2-1/2" - 222710-1 - 354-2227101F1
Door stop holds the door securely against the rubber stop effectively reducing rattling common with most door hooks. The spring-loaded latch allows for quick and easy release. Constructed of sand cast brass with a plain polished finish, these door stops are both decorative and functional. Installs with five #6 FH fasteners (not included).
Seadog 2224251 Hatch Handle, Chrome/Brass, 2-15/16" X 2-3/16" - 222425-1 - 354-2224251F1
Constructed of sand cast brass with a chrome plated finish, these hatch handles are ideal for use on doors, hatches, lazarettes and dock boxes. Handle pivots out to open hatches and lays flush when not in use for a clean appearance. Installs with four #8 FH fasteners (not included).
Seadog 222355 6" Lift Handle, Chrome Brass - 222355-1 - 354-2223551F1
Constructed of sand cast brass with a chrome plated finish, these decorative lifting handles can be used in a multitude of applications. Installs with four #8 FH fasteners (not included).
Seadog 222348 Deluxe 6" Lift Handle, Chrome/Brass - 222348-1 - 354-2223481F1
Constructed of sand cast brass with a chrome plated finish, these decorative lifting handles can be used in a multitude of applications. Installs with four FH fasteners (not included).
Seadog 2223451 Deluxe 4" Lift Handle, Chrome/Brass - 222345-1 - 354-2223451F1
Constructed of sand cast brass with a chrome plated finish, these decorative lifting handles can be used in a multitude of applications. Installs with four FH fasteners (not included).
Seadog 222090 Gooseneck Hook & Swivel, Chrome/Brass, 5-5/8" - 222090-1 - 354-2220901F1
Precision-cast solid brass cabin door hook features a high-quality chrome finish. Dual action hinge eliminates rattle and ensures a secure fit. For use on any type of door to lock in closed or open positions. Easy to install, simply surface mount with four #6 FH fasteners (not included).
Seadog 221942 Round Hatch Handle Latch | Investment Cast 316 Stainless | 3-1/2" Diameter - 221942 - 354-221942F1
Investment cast 316 stainless steel construction for corrosion resistance and durability. This Round Hatch Handle Latch features a T-handle to engage the offset locking arm. Handle is recessed for a flush, clean installation. Requires a cut-out hole and installs with a back mounted stainless nut.
Seadog 2217151 Door Stop & Catch, Stainless, 2" X 4" - 221715-1 - 354-2217151F1
Door stop holds the door securely against the rubber stop effectively reducing rattling common with most door hooks. The spring-loaded latch allows for quick and easy release. Constructed of 316 investment cast stainless for corrosion resistance and durability. Installs with five #6 FH fasteners (not included).
Seadog 221700 Sliding Door Stop | Cast 316 Stainless | #8 Fastener - 221700-1 - 354-2217001F1
Designed to be installed adjacent to a track. This Sliding Door Stop features a hinged arm that flips over to hold open or closed sliding windows or pocket doors. Simple and secure, this stop is constructed of investment cast 316 stainless steel for corrosion resistance and durability. Black polymer coating on stop protects windows or doors from direct metal contact. Countersunk for two #8 FH fasteners (not included).
Seadog 2216101 Door Handle Latch - 221610-1 - 354-2216101F1
Investment Cast 316 Stainless Steel. Constructed of corrosion resistant 316 stainless steel, for a modern, sleek look. Includes strike plate and mounting template. For doors 3/4" - 1-1/2" thick.
Seadog 221355 Heavy-Duty Folding Table Support Brackets, 1 Pr. - 221355-1 - 354-2213551F1
These support brackets fold and lock your table top or leaves in place. Constructed of stamped stainless steel for corrosion resistance and durability. The light duty version is rated for 300 lbs. Installs with #12 RH fasteners sold separately.
Seadog 221320 Table Bracket Kit | Includes (2) Wall Brackets & (2) Table Brackets - 221320-1 - 354-2213201F1
Stamped 304 stainless steel. One set includes two wall brackets and two table brackets.
Seadog 207735-1 Lift Gate Butt Hinge, Right - 207735-1 - 354-2077351F1
Aluminum pontoon lift gate hinge with nylon washers for quiet movement and smooth operation.
Seadog 207730-1 Lift Gate Butt Hinge, Left - 207730-1 - 354-2077301F1
Aluminum pontoon lift gate hinge with nylon washers for quiet movement and smooth operation.
Seadog 205400 Strap Hinge | Investment Cast 316 Stainless | 5-7/8" X 1-1/8" - 205400-1 - 354-2054001F1
Consisting of two long narrow leaves extending from a single knuckle, strap hinges are commonly used for surface mounting dock box lids, fish holds, etc. Constructed of corrosion resistant 316 stainless steel. Good for outdoor applications where the hinges will be in frequent use. Installs with #8 fasteners (not included).
Seadog 2053501 Offset Door Hinge, 316 Stainless, 2-1/8" X 1-1/2" - 205350-1 - 354-2053501F1
This Offset Door Hinge features one side with a 5/16" offset and is designed to be mounted on the front surface of a raised door. Constructed of 3/16" gauge corrosion resistant cast 316 stainless steel with countersunk holes. Installs with five #10 FH fasteners (not included).
Seadog 204280 2-1/2" Chrome Brass Hatch Hinge | #10 Fastener - 204280-1 - 354-2042801F1
Heavy Duty Hatch Hinge features a removable clevis pin with split ring for easy separation. Hinge design includes stop to hold hatch in upright position when open. Constructed of chrome-plated forged brass for corrosion resistance and durability. Easily installed with eight #10 FH fasteners (not included). Sold Individually.
Seadog 155500 Spring Gate 4" Asymmetrical Snap Hook - 155500-1 - 354-1555001F1
Features a quick-connect, wire lever gate and torsion spring. Simple to release lobster-style clasp ideal for applications where the snap needs to be frequently removed. Oblong design allows more gate clearance while the rounded edges prevent snagging. Constructed of corrosion resistant investment cast 316 stainless steel.
Seadog 1543001 3-15/16" Spring Gate Snap Hook, Ss - 154300-1 - 354-1543001F1
The spring gate snap hook features a quick connect wire lever gate and torsion spring. Constructed of marine grade 316 stainless steel for maximum corrosion resistance and durability. Simple to release lobster clasp style hook makes them ideal for applications where the snap needs to be frequently removed. Oblong design allows more gate clearance while the rounded edges prevent snagging.
Seadog 1542701 2-3/4" Spring Gate Snap Hook, Ss - 154270-1 - 354-1542701F1
The spring gate snap hook features a quick connect wire lever gate and torsion spring. Constructed of marine grade 316 stainless steel for maximum corrosion resistance and durability. Simple to release lobster clasp style hook makes them ideal for applications where the snap needs to be frequently removed. Oblong design allows more gate clearance while the rounded edges prevent snagging.
Seadog 1463051 Fast Eye Safety Snap Hook | 11.900 Lb Capacity | 1/8" Diameter - 146305-1 - 354-1463051F1
Constructed of investment cast 316 stainless steel for corrosion resistance and durability the safety snap hook is ideal for a variety of marine applications. Superior breaking strength and a fast eye detail that provides secure line attachment make these snaps suitable for safety harnesses, fishing lines and mooring buoy lines.
Seadog 146305 Fast Eye Safety Snap Hook | 11.900 Lb Capacity | 1/8" Diameter - 146305 - 354-146305 Superseded By: 354-1463051F1
Constructed of investment cast 316 stainless steel for corrosion resistance and durability the safety snap hook is ideal for a variety of marine applications. Superior breaking strength and a fast eye detail that provides secure line attachment make these snaps suitable for safety harnesses, fishing lines and mooring buoy lines.
Seadog 1461231 Fast Eye Boat Snap, Stainless, Size 3 - 146123-1 - 354-1461231F1
This fast eye boat snap features a spring-loaded latch for easy attachment. Constructed of investment cast 316 stainless steel, for maximum corrosion resistance and superior durability, they are designed for medium duty lifting and rigging applications. Handy for anchor lines, tethers, paddle leashes, bow lines, and tow ropes.
Seadog 1461221 Fast Eye Boat Snap, Stainless, Size 2 - 146122-1 - 354-1461221F1
This fast eye boat snap features a spring-loaded latch for easy attachment. Constructed of investment cast 316 stainless steel, for maximum corrosion resistance and superior durability, they are designed for medium duty lifting and rigging applications. Handy for anchor lines, tethers, paddle leashes, bow lines, and tow ropes.
Seadog 1461201 Fast Eye Boat Snap, Stainless, Size 0 - 146120-1 - 354-1461201F1
This fast eye boat snap features a spring-loaded latch for easy attachment. Constructed of investment cast 316 stainless steel, for maximum corrosion resistance and superior durability, they are designed for medium duty lifting and rigging applications. Handy for anchor lines, tethers, paddle leashes, bow lines, and tow ropes.
Seadog 1383051 Bronze Fast Eye Safety Snap Hook 1,500 Lb Capacity 1/8 Diameter - 138305-1 - 354-1383051F1
Seadog 1361201 Bronze Fast Eye Snap, Size 0 - 136120-1 - 354-1361201F1
This fast eye boat snap features a spring-loaded latch for easy attachment. Constructed of marine grade die cast manganese bronze, for maximum corrosion resistance and superior durability, they are designed for medium duty lifting and rigging applications. Handy for anchor lines, tethers, paddle leashes, bow lines and tow ropes. Finish: Bronze
Seadog 0P276011 Screw For 2761601, 2762001 & 2762501 - 0P27601-1 - 354-0P276011F1
Screw for 2761601, 2762001 & 2762501
Seadog 0P273011 Replacement Screw For Deck Hinges - 0P27301-1 - 354-0P273011F1
Screw for 273160 & 273291
Seadog 0P270061 Screw For 2702501 - Op27006 - 354-Op27006F1
Screw for 2702501
Seadog 0P270061 Screw For 2702501 - 0P27006-1 - 354-0P270061F1
Screw for 2702501
Seadog 044206 Open Base Chrome Zinc Stud Mount 6" Cleat - 44206 - 354-044206F1
Die cast chrome plated zinc stud-mount cleats feature attractive, traditional styling. Installation is easy with two standard bit size holes drilled for the studs, no cut-outs or hole saws required. The stud mounted fasteners are hidden leaving no exposed fasteners to collect water or debris. Galvanized studs, washers and nuts included for clean looking installation. Interchangeable with legacy Perko® style 1210 cleats. Recommended for freshwater applications.
Seadog 0433821 Heavy Duty Nylon Cleat, Flat Dark Earth - 043382-1 - 354-0433821F1
Heavy duty injection molded nylon tie-down cleats are corrosion and UV resistant. Larger cleats feature flared posts for added strength and stability. Durable and easy to install, they require two FH fasteners (not included).
