Lines & Rigging
Seachoice 86721 Rope Tow Harness, 3/8" X 12' - 86721 - 50-86721F1
12' usable rope tow harness. Helps improve towing and boat control. High impact plastic float pulley helps keep tow line away from propeller. Large snap hooks for quick attachment. Long length fits pontoon boats & boats with twin motors. Packaged in poly bag with header card.
Seachoice 86701 Rope Tow Harness, 3/8" X 8' - 50-86701 - 50-86701F1
8'' usable rope tow harness. Helps improve towing and boat control. High impact plastic float pulley helps keep tow line away from propeller. Large snap hooks for quick attachment. Packaged in poly bag with header card.
Seachoice 86681 Tube Tow Rope, 50', Tows Up To 2 Riders - 86681 - 50-86681F1
16-Strand hollow braid polypropylene rope 16-Strand hollow braid polypropylene rope6" Loop at tube end and quick-connect snap hook at boat endRope floatsUV protectedRope keeper includedMeets WSIA/AWSA requirements
Seachoice 86671 Heavy Duty Tow Rope For 6 Riders, 60' - 86671 - 50-86671F1
16 Strand 16 Strand3/4" Diameter lineDesigned to tow up to six (6) ridersRope floats6" Loop connection at endReusable storage keeper included
Seachoice 86651 Water Ski Tow Rope, 75', 12" Handle With Textured Rubber Grip - 86651 - 50-86651F1
16-Strand hollow braid polypropylene rope 16-Strand hollow braid polypropylene ropeRope and handle float for quick and easy retrieval on the waterCoated to resist the damaging effects of ultraviolet (UV) lightRope keeper keeps your rope coiled and out of the way when not in useColor may vary
Seachoice 86621 Water Ski Rope, 75', 12" Handle With Rubber Grip - 86621 - 50-86621F1
16-Strand hollow braid polypropylene rope 16-Strand hollow braid polypropylene ropeRope and handle float for quick and easy retrieval on the waterCoated to resist the damaging effects of ultraviolet (UV) lightRope keeper keeps your rope coiled and out of the way when not in useColor may vary
Seachoice 86601 Water Ski Rope, 75', 12" Handle With Foam Grip - 50-86601 - 50-86601F1
Water Ski Rope, 75', 12" Handle with Foam Grip 16-Strand hollow braid polypropylene ropeRope and handle float for quick and easy retrieval on the waterCoated to resist the damaging effects of ultraviolet (UV) lightRope keeper keeps your rope coiled and out of the way when not in useColor may vary
Seachoice 76971 Cooler Mounting Kit Straps Only (2 Per Pack) - 76971 - 50-76971F1
Mounting Kit Straps. Cooler's corners stay put with straps. Prevents injury, boat and cooler damage. Quick disconnect strap design. Corrosion proof. Fastens with #8 screws (not included). 2 per pack.
Seachoice 72-Piece Canvas Snap Kit With Tool, For Boat Covers And Canvas Covers - Rp-Kp7263Sc - 50-59443F1
This Seachoice 72-Piece Snap Kit and Tool makes it easy to install or replace snaps in boating canvas such as boat covers, tonneau covers, and upholstery. The snap hardware is premium grade for durability, reliable long-term performance, and a lasting, appealing finish. The included installation tool makes it easy to securely install snaps where needed. Seachoice is committed to delivering quality marine accessories and OEM replacement parts to satisfy fishing, boating and watersports enthusiasts worldwide. Seachoice is run for and by boaters, offering a wide-ranging product line while remaining affordable. Complete with everything needed to install or replace canvas snapsPremium-grade snap construction ensures reliable long-term performanceVersatile snaps can be installed in canvas covers, tonneau covers and upholstery as neededReliable clinching tool for sure installation of snaps where neededDurable snaps provide long-term performance, can withstand extended exposure to outdoor conditionsManufacturer part number 50-59443
Seachoice 64-Piece Canvas Snap Kit With Tool, For Boat Covers And Canvas Covers - Rp-Kp7261Sc - 50-59441F1
This Seachoice 64-Piece Nickel Plated Brass Canvas Snap Kit With Tool makes it easy to install or replace snaps in boating canvas such as boat covers, tonneau covers, and upholstery. The snap hardware is premium-grade nickel-plated brass construction for durability, reliable long-term performance, and a lasting, appealing finish. The kit contains: 14 sets of Button Sockets with ¼-inch barrel; 14 sets of Button Studs with ¼-inch barrel and eyelet; 8 Button Studs, #8 x 5/8 inch; and a Tapping Screw. The included Tapping Screw makes it easy to securely install snaps where needed. Seachoice is committed to delivering quality marine accessories and OEM replacement parts to satisfy fishing, boating and watersports enthusiasts worldwide. Seachoice is run for and by boaters, offering a wide-ranging product line while remaining affordable. Complete with everything needed to install or replace canvas snapsPremium-grade nickel-plated brass snap construction ensures reliable long-term performanceVersatile snaps can be installed in canvas covers, tonneau covers and upholstery as neededReliable Tapping Screw included for sure installation of snaps where neededDurable snaps provide long-term performance, can withstand extended exposure to outdoor conditionsKit contains: 14 sets Button Sockets with ¼-inch barrel; 14 sets Button Studs with ¼-inch barrel and eyelet; 8 Button Studs, #8 x 5/8 inch; Tapping ScrewManufacturer part number 50-59441
Seachoice 59913 Snap Extendersqty. 2 - Rp-Mp9700Sc - 50-59913F1
Snap Extenders
Seachoice 52261 3,000 Lb. Manual Trailer Winch, 2-Speed, 25-Ft. Strap W/Snap Hook - 50-52261 - 50-52261F1
Includes Winch StrapConstructed of zinc plated steel. Features 1 or 2-way ratchet with free spool center position. Has one piece solid gear. Pre-drilled for 3 bolt mounting. Strap 2" x 25'.
Seachoice 52251 2,000 Lb. Manual Trailer Winch, 2-Speed, 25-Ft. Strap W/Snap Hook - 50-52251 - 50-52251F1
Includes Winch StrapConstructed of zinc plated steel. Features 1 or 2-way ratchet with free spool center position. Has one piece solid gear. Pre-drilled for 3 bolt mounting. 52251: Strap 2" x 25'
Seachoice 52191 1,200 Lb. Manual Trailer Winch, 1-Speed, 25-Ft. Strap W/Snap Hook - 50-52191 - 50-52191F1
Includes Winch StrapConstructed of zinc plated steel. Features 1 or 2-way ratchet with free spool center position. Has one piece solid gear. Pre-drilled for 3 bolt mounting. 52191: Strap 2" x 25'
Seachoice 52161 1,000 Lb. Manual Trailer Winch, 1-Speed, 25-Ft. Strap W/Snap Hook - 50-52161 - 50-52161F1
Includes Winch StrapConstructed of zinc plated steel. Features 1 or 2-way ratchet with free spool center position. Has one piece solid gear. Pre-drilled for 3 bolt mounting. 52161: Strap 2" x 25'
Seachoice 52131 800 Lb. Manual Trailer Winch, 1-Speed, 16-Ft. Strap W/Snap Hook - 50-52131 - 50-52131F1
Includes Winch StrapConstructed of zinc plated steel. Features 1 or 2-way ratchet with free spool center position. Has one piece solid gear. Pre-drilled for 3 bolt mounting. 52131: Strap 2" x 16'
Seachoice 49-Piece Canvas Snap Kit With Tool, For Boat Covers And Canvas Covers - Rp-Kp7260Sc - 50-59439F1
This Seachoice 49-Piece Nickel Plated Brass Canvas Snap Kit With Tool makes it easy to install or replace snaps in boating canvas such as boat covers, tonneau covers, and upholstery. The snap hardware is premium-grade nickel-plated brass construction for durability, reliable long-term performance, and a lasting, appealing finish. The kit contains: 14 sets of Button Sockets with ¼-inch barrel; 14 sets of Button Studs with ¼-inch barrel and eyelet; 8 Button Studs, #8 x 5/8 inch; and a Tapping Screw. The included Tapping Screw makes it easy to securely install snaps where needed. Seachoice is committed to delivering quality marine accessories and OEM replacement parts to satisfy fishing, boating and watersports enthusiasts worldwide. Seachoice is run for and by boaters, offering a wide-ranging product line while remaining affordable. Complete with everything needed to install or replace canvas snapsPremium-grade nickel-plated brass snap construction ensures reliable long-term performanceVersatile snaps can be installed in canvas covers, tonneau covers and upholstery as neededReliable Tapping Screw included for sure installation of snaps where neededDurable snaps provide long-term performance, can withstand extended exposure to outdoor conditionsKit contains: 14 sets Button Sockets with ¼-inch barrel; 14 sets Button Studs with ¼-inch barrel and eyelet; 8 Button Studs, #8 x 5/8 inch; Tapping ScrewManufacturer part number 50-59439
Seachoice 46041 Streamlined Safety Whistle - Single - 46041 - 50-46041F1
Meets USCG as a signal device. Rugged marine whistle colored bright orange and made of non-corroding, high impact plastic. Comes with lanyard.
Seachoice 46040 Streamlined Safety Whistle - Bulk - 46040 - 50-46040F1
Meets USCG as a signal device. Rugged marine whistle colored bright orange and made of non-corroding, high impact plastic. Comes with lanyard.
Seachoice 45441 Rescue Line Throw Bag - 45441 - 50-45441F1
Includes 50' rescue line to throw to person in trouble. Bright, high-visibility yellow polyester bagUV resistantRope floats
Seachoice 40541 Tow Rope For Pwc, 20' - 50-40541 - 50-40541F1
The Seachoice Tow/Dock Line for Personal Water Craft is a strong, 16-strand line that provides 2,000 pounds of tensile strength.This line features a heavy-duty snap hook at both ends and includes a reusable keeper strap. Plus, it won't sink!This is a 3/8 inch x 20 foot line that meets WSIA/AWSA requirements.Seachoice is committed to delivering quality marine accessories and OEM replacement parts to satisfy fishing, boating and watersports enthusiasts worldwide. Seachoice is run for and by boaters, offering a wide-ranging product line while remaining affordable. 16 Strand2,000 Lbs. tensile strengthRope floatsSnap hooks at endsUV protectedIncludes reusable keeper
Seachoice 40151 Braided Utility Line 1/8" X 100' White - 50-40151 - 50-40151F1
Excellent all-purpose rigging rope. Strong, wear resistant, rot resistant. Great for outriggers, tie downs, etc. 1/8" x 100'.
Seachoice 36361 Bundling Strap, 100/Container - 36361 - 50-36361F1
Versatile hook-and-loop closure straps Organize cords, hoses, lines, fishing rods, and much moreIdeal for boats, camping, garages - virtually anywhereDurable 12" W x 1" L webbing reinforced with a bar tack at each endSewn-in loop ideal for hanging from pegs or hooksColors: Yellow, Red, Blue, Black
Seachoice 36351 Bundling Strap, 4/Pk, 12 Packs/Case - 36351 - 50-36351F1
Versatile hook-and-loop closure straps Versatile hook-and-loop closure strapsOrganize cords, hoses, lines, fishing rods, and much moreIdeal for boats, camping, garages - virtually anywhereDurable 12" W x 1" L webbing reinforced with a bar tack at each endSewn-in loop ideal for hanging from pegs or hooksColors: Yellow, Red, Blue, Black
Seachoice 3" Swivel Eye Bolt Snap - 36521 - 50-36521F1
Swivel Eye Bolt Snap, 316 Stainless
Seachoice 3" Swivel Eye Bolt Snap - 36491 - 50-36491F1
Swivel Eye Bolt Snap, Chrome/Brass
Seachoice 19176 Multi-Purpose Strap Wrench Set - 19176 - 50-19176F1
Includes one large (24" / 60 cm) and one small (20" / 50 cm) strap wrenchDurable non-slip industrial strength rubber strap for durabilityFlexible strap fits any shapeAdaptable and easy to operate in confined areasNon-marringComfort grip for extra controlLarge wrench range: 1" to 6-1/2" (25 to 165 mm) in diameterSmall wrench range: 3/8" to 5-1/4" (10 to 133 mm) in diameterVersatile©use on automobiles, tractors, home applications and more
Seachoice 144-Piece Canvas Snap Kit With Tool, For Boat Covers And Tonneau Covers - Rp-Kp7262Sc - 50-59444F1
This Seachoice 144-Piece Snap Kit equips you to replace or install reliable snaps in boating canvas such as boat covers, tonneau covers, and upholstery. The premium-grade, nickel-plated brass snap hardware will deliver durability, reliable long-term performance, and a lasting, appealing finish. The snaps come in a container that makes them easy to access during installation. Seachoice is committed to delivering quality marine accessories and OEM replacement parts to satisfy fishing, boating and watersports enthusiasts worldwide. Seachoice is run for and by boaters, offering a wide-ranging product line while remaining affordable. Large selection of reliable snaps makes it easy to replace or install canvas snapsPremium-grade snap construction ensures reliable long-term performanceNickel-plated brass snaps can withstand long-term exposure to harsh conditionsVersatile snaps can be installed in canvas covers, tonneau covers and upholstery as neededConvenient container makes it easy to access snaps during installationManufacturer part number 50-59444
Sea-Dog Xxx Ss Midget Vent, 2-1/4" - 331370-1 - 354-3313701F1
Stainless steel midget clam shell vents Stamped 304 stainless steel midget clam shell vents provide a splash-proof opening through transoms, cabin sides, etc. Great for routing cables or wires through a hole or for covering thru-hull openings to shield water spray. Ideal for small lockers, they provide attractive cover for ventilation holes while also preventing odors. Three pre-drilled holes for a smooth screw on installation. #6 RH fasteners not included.
Sea-Dog Xxx Ss Midget Vent, 1-5/8" - 331360-1 - 354-3313601F1
Stamped 304 stainless steel midget clam shell vents provide a splash-proof opening through transoms, cabin sides, etc. Great for routing cables or wires through a hole or for covering thru-hull openings to shield water spray. Ideal for small lockers, they provide attractive cover for ventilation holes while also preventing odors. Three pre-drilled holes for a smooth screw on installation. #6 RH fasteners not included.
Sea-Dog Xxx Galvanized Eye & Eye Swivel, 5/8" - 181116 - 354-181116F1
Swivels link together two parts that have separate rotational directions reducing knotting or twisting and relieving stress. Constructed of hot dipped galvanized stamped steel, these eye to eye swivels are ideal for anchor and mooring lines. Large eyes accommodate shackles for chain connections or eye splices with thimbles for anchor rodes.
Sea-Dog Xxx Galvanized Eye & Eye Swivel, 3/8" - 181110 - 354-181110F1
Swivels link together two parts that have separate rotational directions reducing knotting or twisting and relieving stress. Constructed of hot dipped galvanized stamped steel, these eye to eye swivels are ideal for anchor and mooring lines. Large eyes accommodate shackles for chain connections or eye splices with thimbles for anchor rodes.
Sea-Dog Xxx Galvanized Eye & Eye Swivel, 1/2" - 181112 - 354-181112F1
Swivels link together two parts that have separate rotational directions reducing knotting or twisting and relieving stress. Constructed of hot dipped galvanized stamped steel, these eye to eye swivels are ideal for anchor and mooring lines. Large eyes accommodate shackles for chain connections or eye splices with thimbles for anchor rodes.
Sea-Dog Utility Cordage, 5/32" X 50' - 303304050-1 - 354-3033040501F1
Solid braided polyester cord hank. Excellent for many quick tie and flag halyard uses. Mold and rot resistant.
Sea-Dog Utility Cordage, 3/16" X 50' - 303305050-1 - 354-3033050501F1
Solid braided polyester cord hank. Excellent for many quick tie and flag halyard uses. Mold and rot resistant.
Sea-Dog Utility Cordage, 1/8" X 50' - 303303050Wh-1 - 354-303303050Wh1F1
Solid braided polyester cord hank. Excellent for many quick tie and flag halyard uses. Mold and rot resistant.
Sea-Dog Outboard Motor Safety Cable - 371599-1 - 354-3715991F1
Vinyl coated galvanized steel wire.Comes complete with Sea Dog #156060 snap hook.
Sea-Dog Line 916001Inl "The Inland Spinner" Display - 916001-Inl - 354-916001Inlf1
Focus is on Freshwater or Inland Boating. 168 SKUs Merchandisers are available complete with product, back tags, sign, display panel and peg hooks completely set up in a box. A planagram version (P) without plastic panel and peg hooks may also be ordered at a lower cost. Panel dimensions are 16" x 24", 2 panels per side plus 4" for header card. Panels fit Sea-Dog® spinners. Spinner Base with Casters sold separately.
Sea-Dog Line 4203905 2 Position On-Off Switch, 25 Pieces In A Fishbowl Display - 420390-5 - 354-4203905F1
One circuit, normally off, two positions: Off/On. Stamped brass. 15 amps @12VDC. 3/8" x 1" Shaft.
Sea-Dog Line 4203901 2 Position On-Off Switch - 420390-1 - 354-4203901F1
One circuit, normally off, two positions: Off/On. Stamped brass. 15 amps @12VDC. 3/8" x 1" Shaft.
Sea-Dog Line 4201011 Toggle Switch (Spst) - On/Off - 420101-1 - 354-4201011F1
Water resistant Toggle Switches are constructed of stamped brass, injection molded nylon, and polycarbonate. Features a locking ring with lever seal and a protruding cap nut. Easy to install for a variety of applications. 15A @ 12VDC.
Sea-Dog Line 2224151 Ring Pull, Cast Brass, A:2-1/2" , B:2", C:3/16", D:1/8", E:1-1/2", #8 Fh - 222415-1 - 354-2224151F1
Constructed of sand cast brass, these ring pulls are ideal for use on doors, cabinets, chests and drawers. Rings pivot out to open cabinets, etc. and lay flush when not in use. Installs with four #4 FH fasteners (not included).
Sea-Dog Kill Switch 7 Key Universal Lanyard - 420495-1 - 354-4204951F1
This marine emergency cut-off 7 Key Universal Kill Switch with Lanyard attaches to your life vest while operating a boat or personal watercraft. Designed to instantly cut battery power when detached. Constructed of injection molded nylon and Delrin. The 7 key 50" lanyard fits OMC, Johnson, Evinrude, Mercury, Mariner, Force, Yamaha, Honda, Tohatsu, Suzuki, and Nissan kill switches.
Sea-Dog Kill Switch 10 Key Universal Lanyard - 420496-1 - 354-4204961F1
This marine emergency cut-off 10 Key Universal Kill Switch with Lanyard attaches to your life vest while operating a boat or personal watercraft. Designed to instantly cut battery power when detached. Constructed of injection molded nylon and Delrin. The 10 key 50" lanyard fits Johnson, Evinrude, Mercury, Yamaha, Honda, Tohatsu, Suzuki, Kawasaki, OMC, and Nissan kill switches.
Sea-Dog Illuminated Toggle Switch, On/Off/On - 420118-1 - 354-4201181F1
Illuminating Toggle Switches are constructed of stamped brass and injection molded nylon with a polycarbonate toggle. Features a locking ring and lever seal to resist water penetration. Illuminates red in the ON position. Fits panels up to 1/4" thick and requires a 15/32" mounting hole. 1/4" spade terminals make it easy to install. 15A @ 12VDC.
Sea-Dog Illuminated Toggle Switch, On/Off - 420111-1 - 354-4201111F1
Illuminating Toggle Switches are constructed of stamped brass and injection molded nylon with a polycarbonate toggle. Features a locking ring and lever seal to resist water penetration. Illuminates red in the ON position. Fits panels up to 1/4" thick and requires a 15/32" mounting hole. 1/4" spade terminals make it easy to install. 15A @ 12VDC.
Sea-Dog Galvanized Shackle-Load Rated , A:7/8" , B:1-1/4, C:2", D:2-3/4", Max Load: 4-3/4 Ton - 147619 - 354-147619F1
With their rounded shape bow shackles are designed to handle many different types of load from any direction. Constructed of hot dip galvanized drop forged steel these shackles feature a screw pin closure and are ideal for joining anchors to mooring chain. These Screw Pin Anchor Shackles are forged to comply with Federal Spec. RR-C-271b and are load rated.
Sea-Dog Dual Power Socket - 426130-1 - 354-4261301F1
Stamped brass/plastic. Dual Power Socket allows two separate 12 volt devices to be operated at the same time using a power socket or cigarette lighter. Has internal 10 amp fuse. LED indicator light. 12 volt, sockets rated at 5 amps each.
Sea-Dog Boat Hook / Paddle Clip - 491361-1 - 354-4913611F1
This one-piece Boat Hook/Paddle Clip allows for the simple, one handed storage of your boat hook or paddle. Features leash attachment points for securing a paddle leash. Anti-snag ramps prevent line from getting stuck under the clip when not in use. Constructed of UV stabilized injection molded nylon.
Sea-Dog Alligator Clips, Pr. - 426470-1 - 354-4264701F1
Alligator Clips are constructed of chrome plated steel. This pair of long, spring-loaded, serrated jaw Alligator Clips are used for creating temporary electrical connections. Color coded to avoid polarity misidentification. Includes one positive and one negative battery clip. 10A max.
Sea-Dog 7275253 Mushroom Vent, 8" Od, Dark Grey - 727525-3 - 354-7275253F1
Provide passive ventilation for your cabin by reducing stagnant air, mold and mildew without opening a hatch. Fully adjustable with a manual knob. Translucent center provides additional light down below. O-ring and gasket prevent water ingress. Trim piece provided for thru deck installations. 4" hole required. Constructed of injection molded nylon with a nylon cover. Includes all necessary hardware for installation.
Sea-Dog 7275203 Mushroom Vent, 8" Od, Stainless - 727520-3 - 354-7275203F1
Provide passive ventilation for your cabin by reducing stagnant air, mold and mildew without opening a hatch. Fully adjustable with a manual knob. Translucent center provides additional light down below. O-ring and gasket prevent water ingress. Trim piece provided for thru deck installations. 4" hole required. Constructed of injection molded nylon with a formed 304 stainless steel cover. Includes all necessary hardware for installation.
Sea-Dog 727300 Economy Low Profile Cowl Vent - 727300-3 - 354-7273003F1
Designed for air intake or for cabin ventilation when used in conjunction with a dorade box. Great for bilge ventilation with or without a blower. Constructed of dip molded PVC, these low-profile cowl vents are ideal for applications where a taller vent would foul lines or restrict crew movement. Includes snap-on deck plate and cover for use in rough weather. UV resistant. White with a traditional red interior.
Sea-Dog 727149 Deck Plate Only, 4" - 727149 - 354-727149F1
Deck Plate Only
Sea-Dog 727139 Deck Plate Only, 3" - 727139 - 354-727139F1
Deck Plate Only
Sea-Dog 727131 Replacement Cowl Only, Red Interior, 3" - 727131 - 354-727131F1
Replacement Cowl Only, Red interior
Sea-Dog 6721101 Line Cleat, 2-1/2", Brass - 672110-1 - 354-6721101F1
Line Cleat installs with two FH fasteners (not included). Cast brass construction.
Sea-Dog 6721001 Tie Down Cleat, 4-7/16" - 672100-1 - 354-6721001F1
Chrome Plated Zinc.
Sea-Dog 671515 Double Coat Hook - Brass - 671515-1 - 354-6715151F1
Double Coat Hook installs with two #6 FH fasteners (not included). Sand cast brass construction.
Sea-Dog 6715101 Double Coat Hook - Chrome/Brass - 671510-1 - 354-6715101F1
Double Coat Hook installs with two #6 FH fasteners (not included). Sand cast brass construction.
Sea-Dog 6715061 Single Coat Hook - Large, Brass - 671506-1 - 354-6715061F1
Large Single Coat Hook installs with two #6 FH fasteners (not included). Sand cast brass construction.
Sea-Dog 6715011 Single Coat Hook - Large, Chrome/Brass, Pr. - 671501-1 - 354-6715011F1
Large Single Coat Hook installs with two #6 FH fasteners (not included). Sand cast brass construction.
Sea-Dog 6715001 Single Coat Hook - Small, Chromme/Brass, Pr. - 671500-1 - 354-6715001F1
Sand cast brass construction. Chrome/brass.
Sea-Dog 6714971 Folding Coat Hook, A=1-3/16", B= 9/16", C=2", #8 Fh, Weight= .18 - 671497-1 - 354-6714971F1
Folds flat when not in use. Constructed of corrosion resistant investment cast 316 stainless steel with rubber gasket. Installs with two #8 FH fasteners (not included).
Sea-Dog 6714651 Coat Hook - Small - 671465-1 - 354-6714651F1
Stamped 304 Stainless Steel.
Sea-Dog 6514001 Shock Cord 3/8" X 40" W/ Ss Clips - 651400-1 - 354-6514001F1
These Elastic Shock Cords are great for securing bicycles, hand trucks, dinghies, or other odd-shaped items to your boat, trailer, or RV. Also handy for bundling items together, making them easier to carry or store. Constructed of natural rubber with a UV resistant polyethylene cover. Formed stainless hooks for corrosion resistance.
Sea-Dog 6513601 Shock Cord 3/8" X 36" W/ Ss Clips - 651360-1 - 354-6513601F1
These Elastic Shock Cords are great for securing bicycles, hand trucks, dinghies, or other odd-shaped items to your boat, trailer, or RV. Also handy for bundling items together, making them easier to carry or store. Constructed of natural rubber with a UV resistant polyethylene cover. Formed stainless hooks for corrosion resistance.
Sea-Dog 6513001 Shock Cord 3/8" X 30" W/ Ss Clips - 651300-1 - 354-6513001F1
These Elastic Shock Cords are great for securing bicycles, hand trucks, dinghies, or other odd-shaped items to your boat, trailer, or RV. Also handy for bundling items together, making them easier to carry or store. Constructed of natural rubber with a UV resistant polyethylene cover. Formed stainless hooks for corrosion resistance.
Sea-Dog 6512401 Shock Cord Elastic 3/8" X 24" - 651240-1 - 354-6512401F1
These Elastic Shock Cords are great for securing bicycles, hand trucks, dinghies, or other odd-shaped items to your boat, trailer, or RV. Also handy for bundling items together, making them easier to carry or store. Constructed of natural rubber with a UV resistant polyethylene cover. Formed stainless hooks for corrosion resistance.
Sea-Dog 6511801 Shock Cord Elastic 3/8 X 18 - 651180-1 - 354-6511801F1
These Elastic Shock Cords are great for securing bicycles, hand trucks, dinghies, or other odd-shaped items to your boat, trailer, or RV. Also handy for bundling items together, making them easier to carry or store. Constructed of natural rubber with a UV resistant polyethylene cover. Formed stainless hooks for corrosion resistance.
Sea-Dog 590400 Toaster - 590400-1 - 354-5904001F1
Stamped 304 Stainless Steel. Works when placed on a heat source like a stove burner or BBQ.
Sea-Dog 583422 Radar Reflector - 583422 - 354-583422F1
Stamped Aluminum. Built in quick connect corner brackets.
Sea-Dog 5808801 Top Mount Oarlock Socket, Galvanized, 1 Pr. - 580880-1 - 354-5808801F1
Constructed of hot dipped galvanized malleable iron. An economical alternative to stainless or brass.
Sea-Dog 5808711 Oarlock Horn 2-3/16" Round, Galvanized, 1 Pr. - 580871-1 - 354-5808711F1
Constructed of hot dipped galvanized malleable iron. The round horn style secures the oar in place in all sea conditions. An economical alternative to stainless or brass.
Sea-Dog 5808701 Oarlock Horn 2" Round, Galvanized, 1 Pr. - 580870-1 - 354-5808701F1
Constructed of hot dipped galvanized malleable iron. The round horn style secures the oar in place in all sea conditions. An economical alternative to stainless or brass.
Sea-Dog 5804511 Oarlock Sockets, Angle Mount - 580451-1 - 354-5804511F1
Die cast chrome plated zinc.
Sea-Dog 5680101 Cork Key Float - 568010-1 - 354-5680101F1
The Cork Key Float is lightweight and buoyant making it ideal for use around water. Cork material is naturally resistant to liquid. 4-1/8" x 1-7/8".
Sea-Dog 5650501 Rigging Knife - 565050-1 - 354-5650501F1
This handy Rigging Knife is made from corrosion resistant 304 stainless steel. It includes a sharp blade, Marlin spike, shackle key, screw driver, bottle opener and a loop to attach a lanyard (not included). Blade & spike length: 2-1/2".
Sea-Dog 563320-1 Heavy Duty 8-1/4" Canvas & Upholstery Scissors - 563320-1 - 354-5633201F1
304 Stainless Steel/Injection Molded Nylon. These quality stainless steel shears are designed with offset handles to allow the blades to hug the work surface giving you clean and precise cutting characteristics with thin and thick materials. Heavy duty stainless steel blade for optimum performance and long-lasting sharpness. Comfortable soft cushion grip and adjustable blade tension to reduce fatigue. Fine serrated blade with precision ground edge ensures effortless cutting. Ideal for all heavy duty cutting including: rubber, vinyl, leather, plastics, cording, upholstery, and canvas.
Sea-Dog 562569Wh1 Whipping Twine W/Needle, 1Mm X 45' - 562569Wh-1 - 354-562569Wh1F1
Whipping Twine Waxed & braided Polyester twineAdds a professional finish to splices and rope endsKit includes #15 needle
Sea-Dog 5620161 Splicing Fid, 1/2" & Larger Rope - 562016-1 - 354-5620161F1
Stainless steel construction and time-tested design make this fid the ideal tool for expert rope splicing. Hardwood handle for ease of operation and a precision tip for better splices, neater braids and improved rope performance.
Sea-Dog 5620081 Splicing Fid, 1/8" - 1/2" Rope - 562008-1 - 354-5620081F1
Stainless steel construction and time-tested design make this fid the ideal tool for expert rope splicing. Hardwood handle for ease of operation and a precision tip for better splices, neater braids and improved rope performance.
Sea-Dog 521601 Hole Liner, 4-1/16" Od, White - 521601-1 - 354-5216011F1
This Hole Liner grommet is for use to protect wire or cables passing through bulkheads, etc. Protective liner with small lip for access holes. Injection molded polyethylene constuction. Installs with two FH fasteners (not included). Available in black or white.Dimensions: 4-1/16" OD x 2-9/16" ID, 3" Cutout
Sea-Dog 521600 Hole Liner, 4-1/16" Od, Black - 521600-1 - 354-521600F1
This Hole Liner grommet is for use to protect wire or cables passing through bulkheads, etc. Protective liner with small lip for access holes. Injection molded polyethylene constuction. Installs with two FH fasteners (not included). Available in black or white.Dimensions: 4-1/16" OD x 2-9/16" ID, 3" Cutout
Sea-Dog 5215201 Rectangular Motor Flusher - 521520-1 - 354-5215201F1
Simple garden hose connection, no tools required. Features rectangular cups for use with larger outboards.
Sea-Dog 5208491 Dripper Guard® Adhesive Stain Guard, Up To 2-5/8", Qty: 3 Weight .06, Black - 520849-1 - 354-5208491F1
Stops black streaks from staining the side of your boat. Easy do-it yourself installation, simple prep-peel backing and press along the bottom edge of your thru-hull. Patented channel design redirects water out and away from the hull preventing drips down the side and eliminates stains and water sediment build up.
Sea-Dog 5208481 Dripper Guard® Adhesive Stain Guard, Up To 2-5/8", Qty: 3 Weight .06, White - 520848-1 - 354-5208481F1
Stops black streaks from staining the side of your boat. Easy do-it yourself installation, simple prep-peel backing and press along the bottom edge of your thru-hull. Patented channel design redirects water out and away from the hull preventing drips down the side and eliminates stains and water sediment build up.
Sea-Dog 5208471 Dripper Guard® Adhesive Stain Guard, Up To 1-7/8" , Qty: 3 Weight .06, Black - 520847-1 - 354-5208471F1
Stops black streaks from staining the side of your boat. Easy do-it yourself installation, simple prep-peel backing and press along the bottom edge of your thru-hull. Patented channel design redirects water out and away from the hull preventing drips down the side and eliminates stains and water sediment build up.
Sea-Dog 5208461 Dripper Guard® Adhesive Stain Guard, Up To 1-7/8", Qty: 3 Weight .02, White - 520846-1 - 354-5208461F1
Stops black streaks from staining the side of your boat. Easy do-it yourself installation, simple prep-peel backing and press along the bottom edge of your thru-hull. Patented channel design redirects water out and away from the hull preventing drips down the side and eliminates stains and water sediment build up.
Sea-Dog 5208431 Dripper Guard® Adhesive Stain Guard, Up To 2-5/8" , Qty: 1 Weight .02, Black - 520843-1 - 354-5208431F1
Stops black streaks from staining the side of your boat. Easy do-it yourself installation, simple prep-peel backing and press along the bottom edge of your thru-hull. Patented channel design redirects water out and away from the hull preventing drips down the side and eliminates stains and water sediment build up.
Sea-Dog 5208421 Dripper Guard® Adhesive Stain Guard, Up To 2-5/8" , Qty: 1 Weight .02, White - 520842-1 - 354-5208421F1
Stops black streaks from staining the side of your boat. Easy do-it yourself installation, simple prep-peel backing and press along the bottom edge of your thru-hull. Patented channel design redirects water out and away from the hull preventing drips down the side and eliminates stains and water sediment build up.
Sea-Dog 5208411 Dripper Guard® Adhesive Stain Guard, Up To 1-7/8" , Qty: 1 Weight .02, Black - 520841-1 - 354-5208411F1
Stops black streaks from staining the side of your boat. Easy do-it yourself installation, simple prep-peel backing and press along the bottom edge of your thru-hull. Patented channel design redirects water out and away from the hull preventing drips down the side and eliminates stains and water sediment build up.
Sea-Dog 5208401 Dripper Guard® Adhesive Stain Guard, Up To 1-7/8" , Qty: 1 Weight .02, White - 520840-1 - 354-5208401F1
Stops black streaks from staining the side of your boat. Easy do-it yourself installation, simple prep-peel backing and press along the bottom edge of your thru-hull. Patented channel design redirects water out and away from the hull preventing drips down the side and eliminates stains and water sediment build up.
Sea-Dog 520430 Brass Drain Tube - 1-1/4" X 2-7/8" - 520430 - 354-520430F1
Formed brass Drain Tube is flanged 90° on one end for use as a drain for transom, motorwell, livewell, or baitwell applications. For use with brass or stainless steel drain plugs.
Sea-Dog 520280 Brass Drain Tube - 1" X 8" - 520280 - 354-520280F1
Formed brass Drain Tube is flanged 90° on one end for use as a drain for transom, motorwell, livewell, or baitwell applications. For use with brass or stainless steel drain plugs.
Sea-Dog 5202301 Brass Drain Tube - 1" X 2-7/8" - 520230-1 - 354-5202301F1
Formed brass Drain Tube is flanged 90° on one end for use as a drain for transom, motorwell, livewell, or baitwell applications. For use with brass or stainless steel drain plugs.
Sea-Dog 5202201 Brass Drain Tube - 1" X 2-3/8" - 520220-1 - 354-5202201F1
Formed brass Drain Tube is flanged 90° on one end for use as a drain for transom, motorwell, livewell, or baitwell applications. For use with brass or stainless steel drain plugs.
Sea-Dog 5202101 Brass Drain Tube - 1" X 1-7/8" - 520210-1 - 354-5202101F1
Formed brass Drain Tube is flanged 90° on one end for use as a drain for transom, motorwell, livewell, or baitwell applications. For use with brass or stainless steel drain plugs.
Sea-Dog 5200951 Brass Baitwell Plug, 7/8", 2/Pk - 520095-1 - 354-5200951F1
Baitwell Plugs feature cam action for easy installation and leak proof seal for livewells and baitwells. Simply turn the handle clockwise to tighten the plug then snap down the handle to lock. Snap lock handle is adjustable to tighten plug size to fit most bait wells currently available. Durable stamped brass and nitrile rubber construction.
Sea-Dog 5200941 Brass Baitwell Plug, 3/4", 2/Pk - 520094-1 - 354-5200941F1
Baitwell Plugs feature cam action for easy installation and leak proof seal for livewells and baitwells. Simply turn the handle clockwise to tighten the plug then snap down the handle to lock. Snap lock handle is adjustable to tighten plug size to fit most bait wells currently available. Durable stamped brass and nitrile rubber construction.
