Lines & Rigging
Seadog 4269011 Sae Power Cable, 1' - 426901-1 - 354-4269011F1
SAE type Polarized Electrical Connector is a two-prong plug and socket connector set. 14-gauge duplex wire. Maximum: 20A @ 12VDC.
Seadog 4269031 Sae Power Cable, 3' - 426903-1 - 354-4269031F1
SAE type Polarized Electrical Connector is a two-prong plug and socket connector set. 14-gauge duplex wire. Maximum: 20A @ 12VDC.
Seadog 4269061 Sae Power Cable, 6' - 426906-1 - 354-4269061F1
SAE type Polarized Electrical Connector is a two-prong plug and socket connector set. 14-gauge duplex wire. Maximum: 20A @ 12VDC.
Seadog 4269121 Sae Power Cable, 12' - 426912-1 - 354-4269121F1
SAE type Polarized Electrical Connector is a two-prong plug and socket connector set. 14-gauge duplex wire. Maximum: 20A @ 12VDC.
Seadog 4269201 Sae Power Cable Y-Splitter, 12" - 426920-1 - 354-4269201F1
The SAE type polarized electrical connector is a two-prong plug and socket Y-splitter connector set. 14-gauge duplex wire. Maximum: 20A @ 12VDC.
Seadog 4269301 Sae Power Cable Power Plug Kit, 6" - 426930-1 - 354-4269301F1
The SAE type Polarized Electrical Plug Kit is a two-prong plug and socket connector set. 14-gauge lead wire with bullet-type contact pins. Includes two plugs, four heat shrink tubes, and four butt connectors allowing you to customize for your application. Max: 20A @ 12VDC.
Seadog 4269501 Sae Power Socket, Front Mount - 426950-1 - 354-4269501F1
The SAE type Polarized Electrical Connector is a two-prong power socket connector set. Great for solar panel connections and maintaining battery charge. 14-gauge duplex wire. Maximum: 20A @ 12VDC. Installs in a 3/4" hole w/ two #10 RH screws (not included).
Seadog 4269551 Sae Power Socket, Rear Nut Mount - 426955-1 - 354-4269551F1
The SAE type Polarized Electrical Connector is a two-prong power socket connector set. Great for solar panel connections and maintaining battery charge. 14-gauge duplex wire. Maximum: 20A @ 12VDC. Installs in a 7/8" hole with included locking nut.
Seadog 431125 Max Blast Twin Mini 6 Amp 12V Compact Horn - Stamped 304 Stainless Cover - 431125-1 - 354-4311251F1
MaxBlast Twin Mini Compact Horn is constructed with an injection molded housing under the stamped 304 stainless steel cover, which protects the the internal components from corrosion. After a 600 hour salt spray test, this electric horn was completely rust-free! Mounting bracket can be used as a wiring template. When installed, horns should point slightly downward to permit water drainage. At 111 decibels and a frequency (Hz) of 490°20A, this horn meets US Coast Guard's COLREGS and ABYC standard A-23 for use on vessels under 12m (39'). 12VDC. Five-year rust-free warranty. 12VDC. NMMA Type Accepted #2577062.
Seadog 431430-1 Pontoon Boat 12V Mini Compact Horn W/Bracket - 431430-1 - 354-4314301F1
Pontoon Boat Mini Compact Horn with Bracket is constructed of powder coated steel. Includes 304 stainless steel bracket for easy mounting. Recommended for fresh water applications. At 111 decibels and a frequency (Hz) of 370±20A, this horn meets US Coast Guard's COLREGS and ABYC standard A-23 for use on vessels under 12m (39'). 12VDC. NMMA Type Accepted #2601746.
Seadog 431510 Maxblast 5 Amp 118 Db 12V Single 16" Trumpet Horn - Stainless & Molded Motor Housing - 431510-1 - 354-4315101F1
MaxBlast Single Trumpet Horn features a prewired, sealed sound unit. Constructed with an over molded motor housing under a stamped 304 stainless steel exterior and diaphragm, which protects the internal components from corrosion. After a 600 hour salt spray test, this electric horn was completely rust-free! Horn wiring has no polarity, negative or positive can be attached to either wire. Mounting bracket can be used as a wiring template. When installed, the trumpet should point slightly downward to permit water drainage. At 118 decibels and a frequency (Hz) of 390°15A, this horn meets US Coast Guard's COLREGS and ABYC standard A-23 for use on vessels under 12m (39'). 5-year warranty. NMMA Type Accepted #2577069 & 2577070.
Seadog 431520 Maxblast 10 Amp 123 Db 12V Dual 18-1/4" Trumpet Horn - Stainless & Molded Motor Housing - 431520-1 - 354-4315201F1
MaxBlast Dual Trumpet Air Horn is constructed of durable chrome plated brass. When installed, the trumpet should point slightly downward to permit water drainage. Display pack includes horn, compressor, air tubing, and mounting hardware. At 121 decibels and a frequency (Hz) of 375±15A/315±15A, this horn meets the US Coast Guard's COLREGS, US Inland Navigation Rules, Annex III Regulations, and ABYC standard A-23 for boats up to 20 meters (66'). Maximum: 20A. NMMA Type Accepted #2577055.
Seadog 431530 Maxblast 2.5 Amp 118 Db 24V Single 16" Trumpet Horn - Stainless & Molded Motor Housing - 431530-1 - 354-4315301F1
MaxBlast Single Trumpet Horn features a prewired, sealed sound unit. Constructed with an over molded motor housing under a stamped 304 stainless steel exterior and diaphragm, which protects the internal components from corrosion. After a 600 hour salt spray test, this electric horn was completely rust-free! Horn wiring has no polarity, negative or positive can be attached to either wire. Mounting bracket can be used as a wiring template. When installed, the trumpet should point slightly downward to permit water drainage. At 118 decibels and a frequency (Hz) of 390°15A, this horn meets US Coast Guard's COLREGS and ABYC standard A-23 for use on vessels under 12m (39'). 5-year warranty. NMMA Type Accepted #2577069 & 2577070.
Seadog 431540 Maxblast 5 Amp 123 Db 24V Dual 18-1/4" Trumpet Horn - Stainless & Molded Motor Housing - 431540-1 - 354-4315401F1
MaxBlast Dual Trumpet Air Horn is constructed of durable chrome plated brass. When installed, the trumpet should point slightly downward to permit water drainage. Display pack includes horn, compressor, air tubing, and mounting hardware. At 121 decibels and a frequency (Hz) of 375±15A/315±15A, this horn meets the US Coast Guard's COLREGS, US Inland Navigation Rules, Annex III Regulations, and ABYC standard A-23 for boats up to 20 meters (66'). Maximum: 20A. NMMA Type Accepted #2577055.
Seadog 431610 Compact 3.5 Amp 110 Db 12V Single 14" Trumpet Horn - Stamped 304 Stainless - 431610-1 - 354-4316101F1
Compact Single Trumpet Horn features a prewired, sealed sound unit is constructed of 100% stainless steel exterior with a 304 stainless steel diaphragm. Mounting bracket can be used as a wiring template. When installed, the trumpet should point slightly downward to permit water drainage. At 108 decibels and a frequency (Hz) of 460±15A, this horn meets US Coast Guard's COLREGS and ABYC standard A-23 for use on vessels under 12m (39'). 12VDC. NMMA Type Accepted #2577071.
Seadog 431620 Compact 7 Amp 112 Db 12V Dual 16" Trumpet Horn - Stamped 304 Stainless - 431620-1 - 354-4316201F1
Compact Dual Trumpet Horn features a prewired, sealed sound unit is constructed of 100% stainless steel exterior with a 304 stainless steel diaphragm. Mounting bracket can be used as a wiring template. When installed, the trumpet should point slightly downward to permit water drainage. At 110 decibels and a frequency (Hz) of 460±15/415±15, this horn meets US Coast Guard's COLREGS and ABYC standard A-23 for use on vessels under 12m (39'). 12VDC. NMMA Type Accepted #2577072.
Seadog 432510 Maxblast 20 Amp 120 Db 12V 11 Psi Single 17" Trumpet Air Horn - Chrome Plated Brass - 432510-1 - 354-4325101F1
MaxBlast Single Trumpet Air Horn is constructed of durable chrome plated brass. When installed, the trumpet should point slightly downward to permit water drainage. Display pack includes horn, compressor, air tubing, and mounting hardware. At 120 decibels and a frequency (Hz) of 315±15A, this horn meets the US Coast Guard's COLREGS, US Inland Navigation Rules, Annex III Regulations, and ABYC standard A-23 for boats up to 20 meters (66'). 12VDC. Maximum: 20A. NMMA Type Accepted #2577054.
Seadog 432520 Maxblast 20 Amp 121 Db 12V 11 Psi Dual 17" Trumpet Air Horn - Chrome Plated Brass - 432520-1 - 354-4325201F1
MaxBlast Dual Trumpet Air Horn is constructed of durable chrome plated brass. When installed, the trumpet should point slightly downward to permit water drainage. Display pack includes horn, compressor, air tubing, and mounting hardware. At 121 decibels and a frequency (Hz) of 375±15A/315±15A, this horn meets the US Coast Guard's COLREGS, US Inland Navigation Rules, Annex III Regulations, and ABYC standard A-23 for boats up to 20 meters (66'). 12VDC. Maximum: 20A. NMMA Type Accepted #2577055.
Seadog 432590 Trumpet Horn Tube Cover | Fits All Sea-Dog Air Horns & Max Blast Electric Trumpet Horns - 432590-1 - 354-4325901F1
Stainless steel trumpet tube cover fits all Sea-Dog air horns and the Max Blast electric trumpet horns. Keeps green water and bugs from getting into the trumpet tube, and snaps over the end of the tube - No tools necessary. 304 Stainless.
Seadog 432597 Universal 20 Amp 11 Psi 12V Air Horn Compressor With Side Air Exit - Fits Sea-Dog Maxblast Air Horns - 432597-1 - 354-4325971F1
Universal Air Horn Compressor with Side Air Exit works with all Sea-Dog® MaxBlast air horns. For use in tight installation applications where a side air hose attachment is required. Does not include air tubing or mounting hardware. 12VDC. Maximum: 20A.
Seadog 432620 Maxblast 20 Amp 125 Db 12V 11 Psi Dual 9-5/8" Trumpet Air Horn - Chrome Plated Brass - 432620-1 - 354-4326201F1
MaxBlast Mini Dual Trumpet Air Horn is constructed of durable chrome plated brass. When installed, the trumpet should point slightly downward to permit water drainage. Display pack includes horn, compressor, air tubing, and mounting hardware. At 125 decibels and a frequency (Hz) of 630±15A/525±15A, this horn meets the US Coast Guard's COLREGS, US Inland Navigation Rules, Annex III Regulations, and ABYC standard A-23 for boats up to 20 meters (66'). 12VDC. Maximum: 20A. NMMA Type Accepted #2577058.
Seadog 491105 Boat Hook Universal Thread 15" Microfiber Mop - 491105-1 - 354-4911051F1
Boat Hook Microfiber Mop provides gentle and effective cleaning action with its soft straps. The fast-drying microfiber is highly absorbent and scratch resistant, preventing water spots. Fits all Sea-Dog® Boat Hooks and universal/Acme threaded devices.
Seadog 4911081 Boat Hook Hull Scraper - 491108-1 - 354-4911081F1
Boat Hook Hull Scraper can be attached to any Sea-Dog® Boat Hook/Boat Pole or universal/Acme threaded device. Great for waterline cleaning from inside the vessel.
Seadog 491713 Flush Mount 25 Degree Flag Pole Socket | #12 Fastener | Investment Cast 316 Stainless - 491713-1 - 354-4917131F1
25° Flush Mount Flagpole Socket is used for flagpoles up to 1-1/4" in diameter. Maximum speed 10 MPH. Constructed of investment cast 316 stainless. Installs with three #12 FH fasteners (not included).
Seadog 492213 Flagpole 10 Degree Socket | #10 Fastener | Sand Cast Brass Chrome Plated - 492213-1 - 354-4922131F1
10° Flagpole Socket is used for flagpoles up to 1-1/4" in diameter. Maximum speed 10 MPH. Constructed of chrome plated sand cast brass for durability and corrosion resistance. Installs with three FH fasteners (not included).
Seadog 5010723 Premium Electric Oil Pump, 12V - 501072-3 - 354-5010723F1
This portable, lightweight Premium Electric Oil Pump is easy to use and transport. The self-priming 12V pump attaches to battery terminals with alligator clips and drains oil through the dipstick tube on outboards and sterndrives. Convenient DIY operation saves money on expensive oil changes. Its compact size makes it is easy to store. Includes 48" inlet and 80" outlet hoses. Oil flow 0.2 liters per minute. Diesel flow 1.5 liters per minute. 12VDC. 60W. Maximum run time 30 minutes.NOT intended for commercial use. NOT suitable for pumping out transmission oil, water, or flammable liquids.
Seadog 502150H1 Lower Unit Standard Pump - 502150H-1 - 354-502150H1F1
Nylon/aluminum. Standard Pump fits quart oil bottles. Flexible hose gets to hard to reach locations. Threaded (3/8"-16) fitting fits Mercruiser, OMC, Evinrude, Johnson, Honda (70hp & up), Volvo, Force, Mercury (US origin models) and Gamefisher lower units. Includes Yamaha adapter (8mm-1.25) fitting for Mercury (Japanese origin models), Yamaha, Nissan, Tohatsu, Honda.
Seadog 520060 Captive Garboard Drain & Plug | #8 Fastener | Investment Cast 316 Stainless - 520060 - 354-520060F1
This Captive Garboard Drain & Plug is a direct replacement for the bronze, traditional style Sea-Dog® Garboards (520040 and 520042). Captive plug prevents plug from being lost. Constructed of investment cast 316 stainless steel. Installs with three #8 FH fasteners (not included).
Seadog 521550 Telescoping 15-1/2" To 24-1/2" Inboard Motor Flusher - Molded Rubber & Aluminum - 521550-1 - 354-5215501F1
Inboard Motor Flush quickly flushes away salt, sand, minerals, and contaminates from your lower unit cooling system extending the engine's service life. Easy-to-use by fitting the rubber cup over the water intake, connecting a garden hose, and extending the aluminum leg to seal the cup to the hull. Fresh water flushes the cooling system, no tools required. Great for winterizing, tune-ups, and other maintenance that requires running an inboard engine out of the water.
Seadog 5216301 Motor Well Boot, 3" W/Ring - 521630-1 - 354-5216301F1
Motor Well Boot organizes and protects engine control cables, wires, or fuel lines. Black accordion-style seal. UV stabilized molded rubber. Includes mounting ring. Installs with six #8 RH fasteners (not included).
Seadog 5216551 Motor Well Boot, 5-1/2" - 521655-1 - 354-5216551F1
Motor Well Boot organizes and protects engine control cables, wires, or fuel lines. Black accordion-style seal. UV stabilized molded rubber. Includes mounting ring. Installs with six #8 RH fasteners (not included).
Seadog 521663-1 Motor Well Boot - 4-1/8" Split - 521663-1 - 354-5216631F1
Molded rubber/injection molded nylon. Black accordion style seal organizes and protects engine control cables, wires or fuel lines. UV stabilized molded rubber. Boots and rings are cut for trouble free installation without removal of cables. Includes tie wrap. #8 RH Fastener.
Seadog 521664-1 Motor Well Boot - 5-1/2" Split - 521664-1 - 354-5216641F1
Molded rubber/injection molded nylon. Black accordion style seal organizes and protects engine control cables, wires or fuel lines. UV stabilized molded rubber. Boots and rings are cut for trouble free installation without removal of cables. Includes tie wrap. #8 RH Fastener.
Seadog 563255 Cast 17-4Ph Grade Stainless Adjustable Wrench - Includes 1/4" Hex Head & Bottle Opener - 563255-1 - 354-5632551F1
Stainless steel adjustable wrench is made to last a lifetime under any conditions. Includes, 1/4" hex head and bottle opener. Cast 17-4ph stainless.
Seadog 5805701 Brass Round Horn Oarlocks, Pr. - 580570-1 - 354-5805701F1
Constructed of traditional, durable sand cast brass. 1/2" shaft. The horns secure the oar in place in all sea conditions.
Seadog 5805901 Brass Round Horn Oarlocks, Pr. - 580590-1 - 354-5805901F1
Constructed of traditional, durable sand cast brass. 1/2" shaft. The horns secure the oar in place in all sea conditions.
Seadog 5805911 Brass Round Horn Oarlocks, A: 1/2" B: 2-1/8" - 580591-1 - 354-5805911F1
Constructed of traditional, durable sand cast brass. 1/2" shaft. The horns secure the oar in place in all sea conditions.
Seadog 5806001 Brass Oarlock Sockets, Top Mt., Pr. - 580600-1 - 354-5806001F1
Constructed of traditional, durable sand cast brass. Oarlock mounts accept 1/2" shafts and feature polyethylene inserts (#580699) for smooth rotation.
Seadog 5806101 Brass Oarlock Sockets, Side Mt., A:1/2" B: 3-5/8" - 580610-1 - 354-5806101F1
Constructed of traditional, durable sand cast brass. Oarlock mounts accept 1/2" shafts and feature polyethylene inserts (#580699) for smooth rotation.
Seadog 5806201 Bronze Angle Mount Oarlock Socket, A: 1/2" C:1-1/16" - 580620-1 - 354-5806201F1
Constructed of traditional, durable sand cast brass. Oarlock mounts accept 1/2" shafts and feature polyethylene inserts (#580699) for smooth rotation.
Seadog 588060 Flush Mt Drink Holder Combo Black - 588060 - 354-588060F1
Flush Mount Combo Drink Holders feature a dual-purpose design which allows the use of beverage cans with or without insulated can wraps, as well as most standard size bottles. Installation requires a 3-3/4" diameter hole. All holders (except 588060NH) include drain holes. Available in black, white, or gray. Constructed of impact resistant injection molded ABS.
Seadog 588061 Flush Mt Drink Holder Combo White - 588061 - 354-588061F1
Flush Mount Combo Drink Holders feature a dual-purpose design which allows the use of beverage cans with or without insulated can wraps, as well as most standard size bottles. Installation requires a 3-3/4" diameter hole. All holders (except 588060NH) include drain holes. Available in black, white, or gray. Constructed of impact resistant injection molded ABS.
Seadog 604080 It Floats™ - Locking Winch Handle, 8" - 604080 - 354-604080F1
It Floats™ Locking Winch Handle's patented design is made by air assist injection molding instead of a foam filled method, thus preventing any potential leakage of foam from within the handle. Features ball bearings in the handle to ensure smoother action under load.
Seadog 604100 It Floats™ - Locking Winch Handle, 10" - 604100 - 354-604100F1
It Floats™ Locking Winch Handle's patented design is made by air assist injection molding instead of a foam filled method, thus preventing any potential leakage of foam from within the handle. Features ball bearings in the handle to ensure smoother action under load.
Seadog 6714601 Hammock Hooks - Stainless, 2/Cd - 671460-1 - 354-6714601F1
Hammock Hooks are designed with an extra bend for additional holding power. Ideal for fender and lashing hook applications. Corrosion resistant stamped 304 stainless steel construction. Installs with two #6 FH fasteners (not included).
Seadog 7271303 Pvc Low Profile Cowl Vent & Snap On Deck Plate - 727130-3 - 354-7271303F1
Low Profile Cowl Vents with Snap-On Deck Plates are designed for air intake or cabin ventilation when used in conjunction with a dorade box. Great for bilge ventilation with or without a blower. Ideal for applications where a taller vent would foul lines or restrict crew movement. Includes snap-on deck plate and cover for use in rough weather. Constructed of UV resistant dip molded PVC. Avoid contact with acetone or strong solvents.
Seadog 7271323 Pvc Low Profile Cowl Vent & Snap On Deck Plate - 727132-3 - 354-7271323F1
Low Profile Cowl Vents with Snap-On Deck Plates are designed for air intake or cabin ventilation when used in conjunction with a dorade box. Great for bilge ventilation with or without a blower. Ideal for applications where a taller vent would foul lines or restrict crew movement. Includes snap-on deck plate and cover for use in rough weather. Constructed of UV resistant dip molded PVC. Avoid contact with acetone or strong solvents.
Seadog 7271353 Pvc Standard Profile Cowl Vent & Snap On Deck Plate, White With Red Interior - 727135-3 - 354-7271353F1
Standard Cowl Vents with Snap-On Deck Plates are designed for air intake or cabin ventilation when used in conjunction with a dorade box. Great for bilge ventilation with or without a blower. Promotes passive air flow by preventing mold and mildew, and keeping boat interior smell fresh. Includes snap-on deck plate and cover for use in rough weather. Constructed of UV resistant dip molded PVC. Avoid contact with acetone or strong solvents.
Seadog 7271373 Pvc Standard Profile Cowl Vent & Snap On Deck Plate, White - 727137-3 - 354-7271373F1
Standard Cowl Vents with Snap-On Deck Plates are designed for air intake or cabin ventilation when used in conjunction with a dorade box. Great for bilge ventilation with or without a blower. Promotes passive air flow by preventing mold and mildew, and keeping boat interior smell fresh. Includes snap-on deck plate and cover for use in rough weather. Constructed of UV resistant dip molded PVC. Avoid contact with acetone or strong solvents.
Seadog 7271403 Pvc Low Profile Cowl Vent & Snap On Deck Plate - 727140-3 - 354-7271403F1
Low Profile Cowl Vents with Snap-On Deck Plates are designed for air intake or cabin ventilation when used in conjunction with a dorade box. Great for bilge ventilation with or without a blower. Ideal for applications where a taller vent would foul lines or restrict crew movement. Includes snap-on deck plate and cover for use in rough weather. Constructed of UV resistant dip molded PVC. Avoid contact with acetone or strong solvents.
Seadog 7271423 Pvc Low Profile Cowl Vent & Snap On Deck Plate - 727142-3 - 354-7271423F1
Low Profile Cowl Vents with Snap-On Deck Plates are designed for air intake or cabin ventilation when used in conjunction with a dorade box. Great for bilge ventilation with or without a blower. Ideal for applications where a taller vent would foul lines or restrict crew movement. Includes snap-on deck plate and cover for use in rough weather. Constructed of UV resistant dip molded PVC. Avoid contact with acetone or strong solvents.
Seadog 7271453 Pvc Standard Profile Cowl Vent & Snap On Deck Plate, White With Red Interior - 727145-3 - 354-7271453F1
Standard Cowl Vents with Snap-On Deck Plates are designed for air intake or cabin ventilation when used in conjunction with a dorade box. Great for bilge ventilation with or without a blower. Promotes passive air flow by preventing mold and mildew, and keeping boat interior smell fresh. Includes snap-on deck plate and cover for use in rough weather. Constructed of UV resistant dip molded PVC. Avoid contact with acetone or strong solvents.
Seadog Adjustable Pantographic Wiper Arm - Hook Style, 13"-18" - 413368B-1 - 354-413368B1F1
Adjustable J-Hook (automotive style) Pantograph Wiper Arm fits all standard MRV and heavy duty waterproof wiper motors with 5/8" shaft diameter. Compatible with 1.5 and 2.5" shafts. Powder coated 304 stainless steel construction.
Seadog Adjustable Pantographic Wiper Arm - Hook Style, 19"-24" - 413374B-1 - 354-413374B1F1
Adjustable J-Hook (automotive style) Pantograph Wiper Arm fits all standard MRV and heavy duty waterproof wiper motors with 5/8" shaft diameter. Compatible with 1.5 and 2.5" shafts. Powder coated 304 stainless steel construction.
Seadog Adjustable Wiper Arm - Hook Style W/Adjustable Pivoting Tip, 13"-18" - 413268B-1 - 354-413268B1F1
Adjustable J-Hook (automotive style) Wiper Arm with Adjustable Pivoting Tip fits all standard MRV and heavy duty waterproof wiper motors with 5/8" shaft diameter. Compatible with 1.5 and 2.5" shafts. The innovative adjustable tip allows blades to be set at different angles to maximize wiper blade coverage area and to ensure park position parallel to window frame. Powder coated 304 stainless steel construction.
Seadog Adjustable Wiper Arm - Hook Style W/Adjustable Pivoting Tip, 19"-24" - 413274B-1 - 354-413274B1F1
Adjustable J-Hook (automotive style) Wiper Arm with Adjustable Pivoting Tip fits all standard MRV and heavy duty waterproof wiper motors with 5/8" shaft diameter. Compatible with 1.5 and 2.5" shafts. The innovative adjustable tip allows blades to be set at different angles to maximize wiper blade coverage area and to ensure park position parallel to window frame. Powder coated 304 stainless steel construction.
Seadog Adjustable Wiper Arm - Hook Style, 13"-18" - 413168B-1 - 354-413168B1F1
Adjustable J-Hook (automotive style) Wiper Arm fits all standard MRV and heavy duty waterproof wiper motors with 5/8" shaft diameter. Compatible with 1.5 and 2.5" shafts. Powder coated 304 stainless steel construction.
Seadog Adjustable Wiper Arm - Hook Style, 19"-24" - 413174B-1 - 354-413174B1F1
Adjustable J-Hook (automotive style) Wiper Arm fits all standard MRV and heavy duty waterproof wiper motors with 5/8" shaft diameter. Compatible with 1.5 and 2.5" shafts. Powder coated 304 stainless steel construction.
Seadog Butt Hinge With Bearings | Commercial Pattern | Investment Cast 316 Stainless | 1/4" Fastener - 205242 - 354-205242F1
Constructed of investment cast 316 stainless steel these Butt Hinges are designed for applications where both extra strength and corrosion resistance are required. The integral nylon bearings promote rattle-free, silent movement and give the hinge a smoother action. The bearings also disburse the weight of the door compensating for heavier doors and increased use. Commercial ANSI templated screw hole pattern. Installs with eight 1/4" FH fasteners (not included).
Seadog Butt Hinge With Bearings | Commercial Pattern | Investment Cast 316 Stainless | 1/4" Fastener - 205243 - 354-205243F1
Constructed of investment cast 316 stainless steel these Butt Hinges are designed for applications where both extra strength and corrosion resistance are required. The integral nylon bearings promote rattle-free, silent movement and give the hinge a smoother action. The bearings also disburse the weight of the door compensating for heavier doors and increased use. Commercial ANSI templated screw hole pattern. Installs with eight 1/4" FH fasteners (not included).
Seadog Butt Hinge With Bearings | Commercial Pattern | Investment Cast 316 Stainless | 1/4" Fastener - 205244 - 354-205244F1
Constructed of investment cast 316 stainless steel these Butt Hinges are designed for applications where both extra strength and corrosion resistance are required. The integral nylon bearings promote rattle-free, silent movement and give the hinge a smoother action. The bearings also disburse the weight of the door compensating for heavier doors and increased use. Commercial ANSI templated screw hole pattern. Installs with eight 1/4" FH fasteners (not included).
Seadog Butt Hinge With Bearings | Commercial Pattern | Investment Cast 316 Stainless | 1/4" Fastener - 205246 - 354-205246F1
Constructed of investment cast 316 stainless steel these Butt Hinges are designed for applications where both extra strength and corrosion resistance are required. The integral nylon bearings promote rattle-free, silent movement and give the hinge a smoother action. The bearings also disburse the weight of the door compensating for heavier doors and increased use. Commercial ANSI templated screw hole pattern. Installs with eight 1/4" FH fasteners (not included).
Seadog Cast Polished Brass Bell - #6 Fastener - 455001 - 354-455001F1
These Bells are constructed of improved cast brass (not lower grade spun brass). Meets Coast Guard, ABYC, and NMMA requirements (200 cm mouth opening and striker mass no less than 3% of mass of the bell) for use on vessels 12m (39.4") to 20m (65.6") in length. Includes hanger and wall mounted bracket for easy installation. Installs with two #6 FH fasteners (not included). Chrome plated finish.
Seadog Cast Polished Brass Bell | #6 Fastener - 455720 - 354-455720F1
These Bells are constructed of improved cast brass (not lower grade spun brass). 8" Bells meets Coast Guard, ABYC, and NMMA requirements (200 cm mouth opening and striker mass no less than 3% of mass of the bell) for use on vessels 12m (39.4') to 20m (65.6') in length. Includes hanger and wall mounted bracket for easy installation. Installs with two #6 FH fasteners (not included). Mirror polished brass finish.
Seadog Cast Polished Brass Bell | #6 Fastener - 455721 - 354-455721F1
These Bells are constructed of improved cast brass (not lower grade spun brass). 8" Bells meets Coast Guard, ABYC, and NMMA requirements (200 cm mouth opening and striker mass no less than 3% of mass of the bell) for use on vessels 12m (39.4') to 20m (65.6') in length. Includes hanger and wall mounted bracket for easy installation. Installs with two #6 FH fasteners (not included). Chrome plated finish.
Seadog Clam Shell Vent | Stamped 304 Stainless | #6 Fastener - 331335-1 - 354-3313351F1
Clam shell ventilators provide splash protection for vent holes, wire or cable runs and blower-exhaust hose openings. 304 stamped stainless steel construction. Can be used for cabin ventilation with dorade boxes. Great for locker vents. Clam shell vents are ideal for applications where a taller vent would foul lines or restrict crew movement. Pre-drilled holes for a smooth screw on installation. #6 RH fasteners not included.
Seadog Clam Shell Vent | Stamped 304 Stainless | #6 Fastener - 331340-1 - 354-3313401F1
Clam shell ventilators provide splash protection for vent holes, wire or cable runs and blower-exhaust hose openings. 304 stamped stainless steel construction. Can be used for cabin ventilation with dorade boxes. Great for locker vents. Clam shell vents are ideal for applications where a taller vent would foul lines or restrict crew movement. Pre-drilled holes for a smooth screw on installation. #6 RH fasteners not included.
Seadog Clam Shell Vent | Stamped 304 Stainless | #6 Fastener - 331350-1 - 354-3313501F1
Clam shell ventilators provide splash protection for vent holes, wire or cable runs and blower-exhaust hose openings. 304 stamped stainless steel construction. Can be used for cabin ventilation with dorade boxes. Great for locker vents. Clam shell vents are ideal for applications where a taller vent would foul lines or restrict crew movement. Pre-drilled holes for a smooth screw on installation. #6 RH fasteners not included.
Seadog Combination Soft Bristle Brush & Squeegee - 491075-1 - 354-4910751F1
The Boat Hook Combination Soft Bristle Brush & Squeegee fits all Sea-Dog® Boat Hooks and universal/Acme threaded devices. This soft brush is constructed of injection molded nylon with a marine grade silicone rubber squeegee. Soft bristles are scratch resistant for gelcoat, paint, and plastic windows.
Seadog Deluxe Hand Held Rope Cutter - 300095-3 - 354-3000953F1
Easily cuts nylon, polyester, polypropylene and Dacron cordage and webbing Cuts and heat seals at the same timeReplaceable blade heats to 1100° Fahrenheit (600° Celsius) in less than 10 secondsBrass bristle cleaning brush, T-handle Allen wrench, and carrying case included10' heavy-duty grounded cordETL listed
Seadog Drain Tube Flaring Tool - 520290-1 - 354-5202901F1
Drain Tube Flaring Tools for installing 1" drain tubes. Can be used to install all of Sea-Dog® Drain Tubes (520210-520430). Handy item for any toolbox. Drain tube not included.
Seadog Fillet Table Rod Holder Mount - 326510-3 - 354-3265103F1
Solid one-piece construction for long life and easy maintenanceEasily adjustable, multi-position gimbaled rod holder mounting system folds flat for easy storageUV stabilized high-density polypropylene constructionAssembles in minutes, all assembly hardware includedEasily accessible knife and pliers holders
Seadog Fillet Table Rod Holder Mount - 326515-3 - 354-3265153F1
Solid one-piece construction for long life and easy maintenanceEasily adjustable, multi-position gimbaled rod holder mounting system folds flat for easy storageUV stabilized high-density polypropylene constructionAssembles in minutes, all assembly hardware includedEasily accessible knife and pliers holdersHose holder and towel bar
Seadog Grab Handle, Black - 227560-1 - 354-2275601F1
Soft Grip Handle with concealed fasteners (included). Constructed of injection molded nylon with PVC coating.
Seadog Grab Handle, White - 227561-1 - 354-2275611F1
Soft Grip Handle with concealed fasteners (included). Constructed of injection molded nylon with PVC coating.
Seadog Hand Rail Bow Form, Outside Diameter 7/8", 316 Stainless - 295110-1 - 354-2951101F1
These Hand Rail Tees are constructed of investment cast 316 stainless steel for corrosion resistance and durability. Includes set screws where appropriate. Designed for use with 7/8" stainless tubing with a wall thickness of 0.049".
Seadog Hatch Adjuster | Formed & Stamped 304 Stainless & Nylon - 321291-1 - 354-3212911F1
Hatch Latches are constructed of corrosion resistant stamped 304 stainless steel. Simple screw-in action holds hatch securely in closed position. Installs with four #10 RH fasteners (not included).
Seadog Hatch Adjuster | Formed & Stamped 304 Stainless & Nylon - 321292-1 - 354-3212921F1
Hatch Latches are constructed of corrosion resistant stamped 304 stainless steel. Simple screw-in action holds hatch securely in closed position. Installs with four #10 RH fasteners (not included).
Seadog Hatch Adjuster | Formed & Stamped 304 Stainless & Nylon - 321295-1 - 354-3212951F1
Constructed of corrosion resistant formed 304 stainless steel with UV resistant injection molded nylon mounting pads and knob. These Hatch Adjusters feature a simple twist knob to lock into position. Great for dock box lids, hatches, windshields, etc.
Seadog Hatch Adjuster | Formed & Stamped 304 Stainless & Nylon - 321296-1 - 354-3212961F1
Constructed of corrosion resistant formed 304 stainless steel with UV resistant injection molded nylon mounting pads and knob. These Hatch Adjusters feature a simple twist knob to lock into position. Great for dock box lids, hatches, windshields, etc.
Seadog Hatch Pull - 222420-1 - 354-2224201F1
Constructed of chrome plated sand cast brass these Hatch Pulls are ideal for use on doors, hatches, lazarettes, and dock boxes. Handle pivots out to open hatches and lays flush when not in use for a clean appearance. Installs with four #8 FH fasteners (not included).
Seadog Lift Handle - 221275-1 - 354-2212751F1
Investment Cast 316 Stainless. Use #10 FH fasteners.
Seadog Maxblast 11 Psi Air Horn 2-1/2" X 4" Compressor, 12V - 432599-1 - 354-4325991F1
MaxBlast Air Horn Compressor works with all Sea-Dog® MaxBlast air horns. For use in standard installations where head room is not an issue. Does not include air tubing or mounting hardware. 12VDC. Maximum: 20A.
Seadog Maxblast 11 Psi Air Horn 2-1/2" X 4" Compressor, 24V - 432598-1 - 354-4325981F1
MaxBlast Air Horn Compressor works with all Sea-Dog® MaxBlast air horns. For use in standard installations where head room is not an issue. Does not include air tubing or mounting hardware. 24VDC. Maximum: 20A.
Seadog Maxblast 20 Amp 124 Db 12V 11 Psi Mini Single 9-5/8" Trumpet Air Horn - 432610-1 - 354-4326101F1
MaxBlast Mini Single Trumpet Air Horn is constructed of durable chrome plated brass. When installed, the trumpet should point slightly downward to permit water drainage. Display pack includes horn, compressor, air tubing, and mounting hardware. At 124 decibels and a frequency (Hz) of 630±15A, this horn meets the US Coast Guard's COLREGS, US Inland Navigation Rules, Annex III Regulations, and ABYC standard A-23 for boats up to 20 meters (66'). 12VDC. Maximum: 20A. NMMA Type Accepted #2577056 & 2577057.
Seadog Maxblast 20 Amp 124 Db 12V 11 Psi Mini Single 9-5/8" Trumpet Air Horn - 432611-1 - 354-4326111F1
MaxBlast Mini Single Trumpet Air Horn is constructed of durable chrome plated brass. When installed, the trumpet should point slightly downward to permit water drainage. Display pack includes horn, compressor, air tubing, and mounting hardware. At 124 decibels and a frequency (Hz) of 630±15A, this horn meets the US Coast Guard's COLREGS, US Inland Navigation Rules, Annex III Regulations, and ABYC standard A-23 for boats up to 20 meters (66'). 12VDC. Maximum: 20A. NMMA Type Accepted #2577056 & 2577057.
Seadog Non-Watertight Slam Latch | Investment Cast 316 Stainless | 1/8" Fastener | 1-1/2" Diameter - 221961 - 354-221961F1
Constructed of 316 stainless steel for corrosion resistance and durability. These slam latches feature push to close functionality. Activated by the shutting or slamming of a door slam latches are designed so that a spring inside automatically retracts the latch, engaging the keeper, retaining the cover against the frame. Fast and easy to use this latch features a recessed T-handle for quick access. Spring loaded handles help prevent rattling. Easy to install by simply inserting the latch body through a single round cutout and screwing on the back plate. Includes hardware to mount latch. Keeper hardware not included.
Seadog Non-Watertight Slam Latch | Investment Cast 316 Stainless | 1/8" Fastener | 1-1/2" Diameter - 221961L - 354-221961Lf1
Constructed of 316 stainless steel for corrosion resistance and durability. These slam latches feature push to close functionality. Activated by the shutting or slamming of a door slam latches are designed so that a spring inside automatically retracts the latch, engaging the keeper, retaining the cover against the frame. Fast and easy to use this latch features a recessed T-handle for quick access. Spring loaded handles help prevent rattling. Easy to install by simply inserting the latch body through a single round cutout and screwing on the back plate. Includes hardware to mount latch. Keeper hardware not included.
Seadog Op27001 Replacement Screw For Deck Hinges - Op27001 - 354-Op27001F1
Screw for 270160, 270161, 270200, 270230 & 270240
Seadog Op27002 Release Pin For 270210, 270235 & 270245 - Op27002 - 354-Op27002F1
Release Pin for 270210, 270235 & 270245
Seadog Op273031 Replacement Screw For Deck Hinges - Op27303-1 - 354-Op273031F1
Screw for 2732501 & 2732711
Seadog Powder Coated Aluminum & Stainless Waterproof Heavy Duty 12V Wiper Motor | Black Finish - 412211B-3 - 354-412211B3F1
Waterproof Heavy Duty Wiper Motors are a two-speed, self-parking motor for exterior/unprotected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 110°. Powder coated aluminum housing with stainless steel mounting bracket, shaft, and knurled fitting. Adjustable right or left-hand park, factory preset for left-hand park. Powers up to a 24" arm and blade configuration (36" total length). IP66 rating. CE approved. 3-year warranty.
Seadog Powder Coated Aluminum & Stainless Waterproof Heavy Duty 12V Wiper Motor | Black Finish - 412218B-3 - 354-412218B3F1
Waterproof Heavy Duty Wiper Motors are a two-speed, self-parking motor for exterior/unprotected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 110°. Powder coated aluminum housing with stainless steel mounting bracket, shaft, and knurled fitting. Adjustable right or left-hand park, factory preset for left-hand park. Powers up to a 24" arm and blade configuration (36" total length). IP66 rating. CE approved. 3-year warranty.
Seadog Powder Coated Aluminum & Stainless Waterproof Heavy Duty 12V Wiper Motor | Black Finish - 412221B-3 - 354-412221B3F1
Waterproof Heavy Duty Wiper Motors are a two-speed, self-parking motor for exterior/unprotected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 110°. Powder coated aluminum housing with stainless steel mounting bracket, shaft, and knurled fitting. Adjustable right or left-hand park, factory preset for left-hand park. Powers up to a 24" arm and blade configuration (36" total length). IP66 rating. CE approved. 3-year warranty.
Seadog Powder Coated Aluminum & Stainless Waterproof Heavy Duty 12V Wiper Motor | Black Finish - 412228B-3 - 354-412228B3F1
Waterproof Heavy Duty Wiper Motors are a two-speed, self-parking motor for exterior/unprotected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 110°. Powder coated aluminum housing with stainless steel mounting bracket, shaft, and knurled fitting. Adjustable right or left-hand park, factory preset for left-hand park. Powers up to a 24" arm and blade configuration (36" total length). IP66 rating. CE approved. 3-year warranty.
Seadog Powder Coated Aluminum & Stainless Waterproof Heavy Duty 12V Wiper Motor | Black Finish - 412231B-3 - 354-412231B3F1
Waterproof Heavy Duty Wiper Motors are a two-speed, self-parking motor for exterior/unprotected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 110°. Powder coated aluminum housing with stainless steel mounting bracket, shaft, and knurled fitting. Adjustable right or left-hand park, factory preset for left-hand park. Powers up to a 24" arm and blade configuration (36" total length). IP66 rating. CE approved. 3-year warranty.
Seadog Powder Coated Aluminum & Stainless Waterproof Heavy Duty 12V Wiper Motor | Black Finish - 412238B-3 - 354-412238B3F1
Waterproof Heavy Duty Wiper Motors are a two-speed, self-parking motor for exterior/unprotected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 110°. Powder coated aluminum housing with stainless steel mounting bracket, shaft, and knurled fitting. Adjustable right or left-hand park, factory preset for left-hand park. Powers up to a 24" arm and blade configuration (36" total length). IP66 rating. CE approved. 3-year warranty.
Seadog Powder Coated Aluminum & Stainless Waterproof Heavy Duty 12V Wiper Motor | White Finish - 412211W-3 - 354-412211W3F1
Waterproof Heavy Duty Wiper Motors are a two-speed, self-parking motor for exterior/unprotected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 110°. Powder coated aluminum housing with stainless steel mounting bracket, shaft, and knurled fitting. Adjustable right or left-hand park, factory preset for left-hand park. Powers up to a 24" arm and blade configuration (36" total length). IP66 rating. CE approved. 3-year warranty.
Seadog Powder Coated Aluminum & Stainless Waterproof Heavy Duty 12V Wiper Motor | White Finish - 412218W-3 - 354-412218W3F1
Waterproof Heavy Duty Wiper Motors are a two-speed, self-parking motor for exterior/unprotected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 110°. Powder coated aluminum housing with stainless steel mounting bracket, shaft, and knurled fitting. Adjustable right or left-hand park, factory preset for left-hand park. Powers up to a 24" arm and blade configuration (36" total length). IP66 rating. CE approved. 3-year warranty.
Seadog Powder Coated Aluminum & Stainless Waterproof Heavy Duty 12V Wiper Motor | White Finish - 412221W-3 - 354-412221W3F1
Waterproof Heavy Duty Wiper Motors are a two-speed, self-parking motor for exterior/unprotected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 110°. Powder coated aluminum housing with stainless steel mounting bracket, shaft, and knurled fitting. Adjustable right or left-hand park, factory preset for left-hand park. Powers up to a 24" arm and blade configuration (36" total length). IP66 rating. CE approved. 3-year warranty.
