Lines & Rigging
Toggle Switch On/Off--Brass - 420465 - 354-420465F1
Stamped brass.
Top Insert 1" Square Tube 2Cd - 273580-1 - 354-2735801F1
Top Fitting inserts for 1" square tubing are constructed of UV stabilized injection molded nylon. Top Fittings create an attachment point and function as a pivot point as part of a Bimini top system. 1/4" Pin size.
Top Insert 1" Square Tube 2Cd - 273581-1 - 354-2735811F1
Top Fitting inserts for 1" square tubing are constructed of UV stabilized injection molded nylon. Top Fittings create an attachment point and function as a pivot point as part of a Bimini top system. 1/4" Pin size.
Top Slide 1" Square Tube 2/Cd - 273560-1 - 354-2735601F1
Used as part of a Bimini top system to install a new Bimini top to boat rails or for adding additional support arms to an existing top. These injection molded nylon Slide Fittings are durable, UV and corrosion resistant. Square jaws fit 1" x 1" tubing commonly found on pontoon boats. Set screw on back allows you to quickly and easily adjust the placement of these slides where they are needed.
Top Slide 1" Square Tube 2/Cd - 273561-1 - 354-2735611F1
Used as part of a Bimini top system to install a new Bimini top to boat rails or for adding additional support arms to an existing top. These injection molded nylon Slide Fittings are durable, UV and corrosion resistant. Square jaws fit 1" x 1" tubing commonly found on pontoon boats. Set screw on back allows you to quickly and easily adjust the placement of these slides where they are needed.
Tow Dolly Tie-Down Strap - 46-700034 - 388-46700034F1
Secures towed vehicle to your tow dolly. One size fits 14" to 16" tiresHeavy duty metal hooks attaches on driver or passenger sideHeavy-duty 5,000 lb capacityFits Most Tow DolliesManufacturers 1 Year Warranty
Track End Cap Insert .85 Black - 273213-1 - 354-2732131F1
Track Fittings are constructed of UV resistant injection molded nylon. End Caps establish the termination point of a Bimini slide assembly.
Track Slide, Black - 273220-1 - 354-2732201F1
.850 Nylon track slides.
Transom Mount 3-Step Ladder - Tt-3X - 332-Tt3Xf1
Stainless steel steps mount on a vertical surfaceStows in upright positionBottom step telescopes out to extend deeper into the water
Transom Mount Bracket - Dlb-3 - 332-Dlb3F1
Included with DL-3X and DL-4X. Slide pin used to secure ladder when in use.
Transom Tie Down Strap - 15232-7 - 23-152327F1
Strong 2" wide webbing. Quick release (over-center) buckle. Zinc alloy plated finish. Heavy gauge, vinyl-coated, corrosion-resistant S-hook. Hook-N-Loop closure secures the buckle handle in the lock position. Protective pad behind buckle prevents marring and scratching on gel coated or painted surfaces.
Trolling Snaps, Lg. - 1155 - 736-1155F1
Nickel/silver trolling snaps - large, approximately 5" overall length.
Trolling Snaps, Sm. - 1156 - 736-1156F1
Stainless steel trolling snaps - small, approximately 3" overall length.
Twin Roller Door Catch - 227141-1 - 354-2271411F1
Upgrade your cabinet or wardrobe with these Twin Roller Door Catches. Sturdy injection molded nylon construction these catches provide secure door closure. Installs with four #6 RH fasteners (not included). Packed in sets of 4 each.
Twin Shank Bow Eye - 079233-1 - 354-0792331F1
features a die cast zinc chrome plated head with chrome steel shafts. U-Bolt surrounds cast eye for added strength. 5/16"-18 UNC threads. For use as a tie-down point on your boat's bow. Nuts and washers included. Recommended for fresh water applications. Breaking strength is 6,000 lbs.
Twisted Nylon Dl 3/8 X25 Wht - 301110025Wh-1 - 354-301110025Wh1F1
Twisted Nylon Rope White, 1" X 600' - 50-42840 - 50-42840F1
Manufactured from 100% filament nylon fibers. Has great elasticity properties and the ability to absorb sudden shock loads. Excellent resistance to abrasion, rot, mildew, oil, grease, gasoline, acids and most chemicals.
Twisted Nylon Rope, White, 1/2" X 600' - 40810 - 50-40810F1
Manufactured from 100% filament nylon fibers. Has great elasticity properties and the ability to absorb sudden shock loads. Excellent resistance to abrasion, rot, mildew, oil, grease, gasoline, acids and most chemicals.
Twisted Nylon Rope, White, 1/4" X 600' - 40790 - 50-40790F1
Manufactured from 100% filament nylon fibers. Has great elasticity properties and the ability to absorb sudden shock loads. Excellent resistance to abrasion, rot, mildew, oil, grease, gasoline, acids and most chemicals.
Twisted Nylon Rope, White, 3/4" X 600' - 42830 - 50-42830F1
Manufactured from 100% filament nylon fibers. Has great elasticity properties and the ability to absorb sudden shock loads. Excellent resistance to abrasion, rot, mildew, oil, grease, gasoline, acids and most chemicals.
Twisted Nylon Rope, White, 3/8" X 600' - 40800 - 50-40800F1
Manufactured from 100% filament nylon fibers. Has great elasticity properties and the ability to absorb sudden shock loads. Excellent resistance to abrasion, rot, mildew, oil, grease, gasoline, acids and most chemicals.
Twisted Nylon Rope, White, 5/16" X 600' - 42820 - 50-42820F1
Manufactured from 100% filament nylon fibers. Has great elasticity properties and the ability to absorb sudden shock loads. Excellent resistance to abrasion, rot, mildew, oil, grease, gasoline, acids and most chemicals.
Twisteded Nylon Rope 5/8" X 600' - 40820 - 50-40820F1
Manufactured from 100% filament nylon fibers. Has great elasticity properties and the ability to absorb sudden shock loads. Excellent resistance to abrasion, rot, mildew, oil, grease, gasoline, acids and most chemicals.
Two Pole Rod Storage Rack, Black - 325029-1 - 354-3250291F1
Constructed from one-piece of injection molded UV stabilized polypropylene. Holds rods up to 1-3/4" in diameter. Includes four #8 stainless steel mounting screws. Has a built-in knife and lure holder.
Ufp Thermoplastic Add-On Brakeline Kit - K71-112-00 - 445-K7111200F1
Unlike other flexible brake lines, UFP's Non-Corrosive Thermoplastic brake lines have an extremely low expansion rate which delivers higher braking pressures for decreased stopping distances. Working Pressure 3,000 PSIBrass Fittings for corrosion resistanceThermoplastic lines meet all FMVSS 106 RequirementsKit Includes: (1) 101" Thermoplastic Brake Line and (1) 54" Thermoplastic Brake Line
Ufp Thermoplastic Brakeline Kit, Dual Axle - K71-111-00 - 445-K7111100F1
Unlike other flexible brake lines, UFP's Non-Corrosive Thermoplastic brake lines have an extremely low expansion rate which delivers higher braking pressures for decreased stopping distances. Working Pressure 3,000 PSIBrass Fittings for corrosion resistanceThermoplastic lines meet all FMVSS 106 RequirementsKit includes: brake lines, banjo fittings, banjo bolts and copper washers
Ufp Thermoplastic Brakeline Kit, Single Axle - K71-110-00 - 445-K7111000F1
Unlike other flexible brake lines, UFP's Non-Corrosive Thermoplastic brake lines have an extremely low expansion rate which delivers higher braking pressures for decreased stopping distances. Working Pressure 3,000 PSIBrass Fittings for corrosion resistanceThermoplastic lines meet all FMVSS 106 RequirementsKit includes: brake lines, banjo fittings, banjo bolts and copper washers
Universal Deck Plate Key - 335690-1 - 354-3356901F1
Universal Deck Fill Key is constructed of corrosion resistant stamped 304 stainless steel. Fits all Sea-Dog® fuel fills as well as most other competitors fills. A multi-purpose tool that also functions as a shackle key, bottle opener, straight blade screwdriver, plus 5/16", and 7/16" hex head wrenches.
Universal Kill Switch - 420498-1 - 354-4204981F1
The marine emergency cut-off Universal Kill Switch attaches to your life vest while operating a boat or personal watercraft and is designed to instantly cut battery power when detached. Dual circuitry allows kill switch to be wired for either ignition kill or magneto kill depending on the application. The housing is constructed of weatherproof injection molded nylon and Delrin with 1/4" brass terminals. The switch includes a lanyard approximately 15" when coiled and 48" when stretched, which should be replaced if worn, cut, or frayed. Mounting hole is 5/8" in diameter. Maximum panel thickness: 3/8". Maximum 5A draw. WARNING: Switch should be tested for proper function before each use.
Universal Line Release - 2250009 - 627-2250009F1
Mount Cannon's portable, packable Mini-Troll to a canoe, jon boat, sailboat, or virtually any craft. Mini-Troll's tough Lexan™ frame and low profile design make it ideal for fly-ins and float trips. Pre-spooled with 100 ft./120-lb test rugged stainless steel cable. Horizontal manual reel/brake. Built-in 2 1/2" C-clamp base. 4 lb weight capacity. Limited Lifetime Warranty.
Valvtect Mar Gasoline 2.5G @2 Additive Gas - Vmga2.5 - 93-Vmg25F1
Valvtect Marine Gasoline 55G Additive Gas - Vmga55 - 93-Vmg55F1
Ventadome Dome Smoke Old Style Rounded Dome Replaces P/N 312-Bv05540310 - Bv0554-03 - 312-Bv055403F1
Ventadome Dome Wht Old Style Rounded Dome Replaces P/N 312-Bv05540110 - Bv0554-01 - 312-Bv055401F1
Ventline® Bva031200 6-1/2" Fan Blade - Bva0312-00 - 312-Bva031200F1
Used on the following products:V2062, V2263, V2044, V2244, V2045, V2245, V2015, V2215. Fits shaft .214 dia. CW
Ventline® Bvd021800 12 Volt Motor Kit - Bvd0218-00 - 312-Bvd021800F1
This kit replaces VD0218 and older VA0164 and VC0468 12V motors used in Ventline's standard roof ventadomes and range hoods. Included in the kit is the VD0218 motor, motor lead wires, screws, instruction sheet and a drill template to retro fit the VD0218 motor to the brackets used with older motors.
Ventline® Bvd02180020 12 Volt Motor Kit - Bvd0218-00-20 - 312-Bvd02180020 Superseded By: 312-Bvd021800F1
This kit replaces VD0218 and older VA0164 and VC0468 12V motors used in Ventliney®'s standard roof ventadomes and range hoods. Included in the kit is the VD0218 motor, motor lead wires, screws, instruction sheet and a drill template to retro fit the VD0218 motor to the brackets used with older motors.
Ventline® Bvd027800 120 Volt Motor Kit - Bvd0278-00 - 312-Bvd027800 Superseded By: 312-Bcd02780004F1
Used on range hoods, roof vents, ceiling fans, sidewall vents and attic ventilators
Ventliney® Plastic Plumbing Vents For 1-1/2" Vent Pipe, Colonial White - V2049-03 - 312-V204903F1
Durable polyethylene with chimassorb for ultraviolet ray protection Two piece constructionAccommodates maximum 6/12 pitch roofsFlange has mounting holes and a wipe seal featureRemovable cap snaps on and securely fastens to flange with screw (not included)
Ventliney® Plastic Plumbing Vents For 1-1/2" Vent Pipe, White - V204901 - 312-V204901F1
Durable polyethylene with chimassorb for ultraviolet ray protection Two piece constructionAccommodates maximum 6/12 pitch roofsFlange has mounting holes and a wipe seal featureRemovable cap snaps on and securely fastens to flange with screw (not included)
Verna-Ski Inline Ski Boat Muffler, 45 Degree - 1000265 - 383-1000265F1
It is designed to fit in your boat for quick easy installation. Available in straight or 45° angled inlet. For use above the waterline.
Vibration Activated Hour Meter - Hr8065 - 328-Hr8065F1
Track the service life of all non-engine applications - automatic vibration activated recordingNo power required - sealed waterproof lifetime batteryPreventative maintenance - bearings, lubrication, etcAutomatic roll-overResolution 0.1 hourEasy installation - No wiring needed, peel & stick or use included hardwareRecords to 9,999.9 hoursHour glass symbol appears and flashes on/off to indicate counting time100% epoxy encapsulated case resists waterOne year warranty
Vintage Traditional 3-Strand Polyester Line, 1/2" X 600' - 7000-16-00600 - 325-70001600600F1
The perfect compliment for the traditional vessel. Low stretch running rigging. Excellent abrasion resistance with low stretch and high strength. Easy to splice. Use on dinghies, traditional boats, halyards and control lines.
Vintage Traditional 3-Strand Polyester Line, 3/8" X 600' - 7000-12-00600 - 325-70001200600F1
The perfect compliment for the traditional vessel. Low stretch running rigging. Excellent abrasion resistance with low stretch and high strength. Easy to splice. Use on dinghies, traditional boats, halyards and control lines.
Vintage Traditional 3-Strand Polyester Line, 5/8" X 600' - 7000-20-00600 - 325-70002000600F1
The perfect compliment for the traditional vessel. Low stretch running rigging. Excellent abrasion resistance with low stretch and high strength. Easy to splice. Use on dinghies, traditional boats, halyards and control lines.
W-25 Marithane Replacement Wheel - W25 - 332-W25F1
Hand cast from an elastomer unmatched in ability to resit wear and distiortion at high loads Won't wear line or chainMore durable, yet quieter than either hard plastic or metal
Wa 12V Pwc Startr Cw 9S Spline - 8M6007262 - 710-50-8M6007262F1
Walex Assure32Cl Assure Odor Eliminator, Clean Linen, 32 Oz. - Assure32Cl - 556-Assure32Clf1
Leaves the area with a fresh fragrance that lasts. Assure™ Odor Eliminator is designed specifically to fight even the toughest pet, trash, and bathroom odors. Also great for eliminating smoke, mold and mildew, or anywhere a foul odor is present. Safe for use around dogs and cats. Destroys odor molecules on contactIdeal for air, carpet, fabric, or other odorous surfaces
Waterproof 12V Trolling Motor Plug - 426184-1 - 354-4261841F1
Trolling Motor Plug is constructed of injection molded PVC. Two 10-gauge wire leads. Receptacle fits 1-1/8" hole. 30A.
Waterproof 12V Trolling Motor Receptacle - 426183-1 - 354-4261831F1
Trolling Motor Plug is constructed of injection molded PVC. Two 10-gauge wire leads. 30A.
Waterproof Playing Cards - 588811-1 - 354-5888111F1
Designed especially for marine use and are 100% plastic. New design features artwork of ship's figureheads. Very durable.
Weaver Rbd100 Swim Grid Snap Davits For Inflatables, Black - Rbd100 - 957-Rbd100F1
Designed for inflatable boats with a total weight of 150 lbs or less. 100% solid stainless steel, all hardware included. Push release and snap hook-up prevents pinched fingers. Provides safe entry to and exit from inflatable dinghy. Hypalon, molded rubber parts, resistant to sun and salt.
Weaver Rbd100G Swim Grid Snap Davits For Inflatables, Grey - Rbd100G - 957-Rbd100Gf1
Designed for inflatable boats with a total weight of 150 lbs or less. 100% solid stainless steel, all hardware included. Push release and snap hook-up prevents pinched fingers. Provides safe entry to and exit from inflatable dinghy. Hypalon, molded rubber parts, resistant to sun and salt.
Weaver Rbd150G Transom Snap Davits For Inflatables, Grey - Rbd150G - 957-Rbd150Gf1
Designed for inflatable boats with a total weight of 150 lbs or less. 100% solid stainless steel, all hardware included. Push release and snap hook-up prevents pinched fingers. Provides safe entry to and exit from inflatable dinghy. Hypalon, molded rubber parts, resistant to sun and salt.
Weaver Snap-Ups Davits - Snap Ups - 957-Snapupsf1
These have a 12" drop for hooking up a dinghy from a high swim platform and lifting it out of the water to a 3" drop below the swim platform so the dinghy doesn't fill up with water.
Weld On W/Galv Straps 3 X 12 - W12 - 70-W12F1
Zinc Plates w/Straps
Wheel Chock With Rope - 52110 - 50-52110F1
Keeps your trailer in place so you can re-hitch safely Constructed of durable hard plastic with UV inhibitorsIncludes rope for convenient placement and removal
White Nylon Eye Strap, 4/Card - 28871 - 50-28871F1
Multitude of applications.
White Plastic Rope Deck Pipe - 1057Dp0Wht - 9-1057Dp0Whtf1
Constructed of high impact plastic. U.V. stabilized, fiber reinforced. Hinged, snap-down cover. #8 screw
White Sta-Set Polyester Double Braid, 1/2" X 600' - 21001600600 - 325-21001600600F1
Double braid. A strong, flexible, and long wearing line. Great for a wide range of boats for Mainsheets, Jibsheets & Control lines. Durable and spliceable.
White Sta-Set Polyester Double Braid, 1/4" X 600' - 21000800600 - 325-21000800600F1
Double braid. A strong, flexible, and long wearing line. Great for a wide range of boats for Mainsheets, Jibsheets & Control lines. Durable and spliceable.
White Sta-Set Polyester Double Braid, 3/16" X 600' - 21000600600 - 325-21000600600F1
Double braid. A strong, flexible, and long wearing line. Great for a wide range of boats for Mainsheets, Jibsheets & Control lines. Durable and spliceable.
White Sta-Set Polyester Double Braid, 3/8" X 600' - 21001200600 - 325-21001200600F1
Double braid. A strong, flexible, and long wearing line. Great for a wide range of boats for Mainsheets, Jibsheets & Control lines. Durable and spliceable.
White Sta-Set Polyester Double Braid, 5/16" X 600' - 21001000600 - 325-21001000600F1
Double braid. A strong, flexible, and long wearing line. Great for a wide range of boats for Mainsheets, Jibsheets & Control lines. Durable and spliceable.
White Sta-Set Polyester Double Braid, 7/16" X 600' - 21001400600 - 325-21001400600F1
Double braid. A strong, flexible, and long wearing line. Great for a wide range of boats for Mainsheets, Jibsheets & Control lines. Durable and spliceable.
Wichard 10304 Shackle Key With Spike Tool - 10304 - 905-10304F1
Stainless steel. Shackle and spike tool to unlock any locked shackle. Includes bottle opener.
Wichard 1201 Self-Locking D Shackle, 5/32" - 1201 - 905-1201F1
Head of shackle pin locks into notches on body to prevent accidental release due to vibrations. Forged in 316L stainless steel. Designed and made in France. A= Inside height B= Opening width
Wichard 1203 Self-Locking D Shackle, 1/4" - 1203 - 905-1203F1
Head of shackle pin locks into notches on body to prevent accidental release due to vibrations. Forged in 316L stainless steel. Designed and made in France. A= Inside height B= Opening width
Wichard 1204 Self-Locking D Shackle, 5/16" - 1204 - 905-1204F1
Head of shackle pin locks into notches on body to prevent accidental release due to vibrations. Forged in 316L stainless steel. Designed and made in France. A= Inside height B= Opening width
Wichard 1207 Self-Locking D Shackle, 9/16" - 1207 - 905-1207F1
Head of shackle pin locks into notches on body to prevent accidental release due to vibrations. Forged in 316L stainless steel. Designed and made in France. A= Inside height B= Opening width
Wichard 1212 Self-Locking Long Shackle, 3/16" - 1212 - 905-1212F1
Head of shackle pin locks into notches on body to prevent accidental release due to vibrations. Forged in 316L stainless steel. Designed and made in France. A= Inside height B= Opening width
Wichard 1213 Self-Locking Long Shackle, 1/4" - 1213 - 905-1213F1
Head of shackle pin locks into notches on body to prevent accidental release due to vibrations. Forged in 316L stainless steel. Designed and made in France. A= Inside height B= Opening width
Wichard 1215 Self-Locking Long Shackle, 5/16" - 1214 - 905-1214F1
Head of shackle pin locks into notches on body to prevent accidental release due to vibrations. Forged in 316L stainless steel. Designed and made in France. A= Inside height B= Opening width
Wichard 1242 Self-Locking Bow Shackle, 3/16" - 1242 - 905-1242F1
Head of shackle pin locks into notches on body to prevent accidental release due to vibrations. Forged in 316L stainless steel. Designed and made in France. A= Inside height B= Opening width
Wichard 1243 Self-Locking Bow Shackle, 1/4" - 1243 - 905-1243F1
Head of shackle pin locks into notches on body to prevent accidental release due to vibrations. Forged in 316L stainless steel. Designed and made in France. A= Inside height B= Opening width
Wichard 1245 Self-Locking Bow Shackle, 13/32" - 1245 - 905-1245F1
Head of shackle pin locks into notches on body to prevent accidental release due to vibrations. Forged in 316L stainless steel. Designed and made in France. A= Inside height B= Opening width
Wichard 1246 Self-Locking Bow Shackle, 15/32" - 1246 - 905-1246F1
Head of shackle pin locks into notches on body to prevent accidental release due to vibrations. Forged in 316L stainless steel. Designed and made in France. A= Inside height B= Opening width
Wichard 1401 Captive Pin "D" Shackle, 5/32" - 1401 - 905-1401F1
Self-locking captive pin cannot be dropped when opened so there is no risk of loss. Forged in 316L stainless steel. Designed and made in France. A= Inside height B= Opening width
Wichard 1403 Captive Pin "D" Shackle, 1/4" - 1403 - 905-1403F1
Self-locking captive pin cannot be dropped when opened so there is no risk of loss. Forged in 316L stainless steel. Designed and made in France. A= Inside height B= Opening width
Wichard 1404 Captive Pin "D" Shackle, 5/16" - 1404 - 905-1404F1
Self-locking captive pin cannot be dropped when opened so there is no risk of loss. Forged in 316L stainless steel. Designed and made in France. A= Inside height B= Opening width
Wichard 1406 Captive Pin "D" Shackle, 1/2" - 1406 - 905-1406F1
Self-locking captive pin cannot be dropped when opened so there is no risk of loss. Forged in 316L stainless steel. Designed and made in France. A= Inside height B= Opening width
Wichard 1411 Captive Pin Long "D" Shackle, 5/32" - 1411 - 905-1411F1
Self-locking captive pin cannot be dropped when opened so there is no risk of loss. Forged in 316L stainless steel. Designed and made in France. A= Inside height B= Opening width
Wichard 1412 Captive Pin Long "D" Shackle, 3/16" - 1412 - 905-1412F1
Self-locking captive pin cannot be dropped when opened so there is no risk of loss. Forged in 316L stainless steel. Designed and made in France. A= Inside height B= Opening width
Wichard 1414 Captive Pin Long "D" Shackle, 5/16" - 1414 - 905-1414F1
Self-locking captive pin cannot be dropped when opened so there is no risk of loss. Forged in 316L stainless steel. Designed and made in France. A= Inside height B= Opening width
Wichard 1422 Captive Pin Twisted Shackle, 3/16" - 1422 - 905-1422F1
Self-locking captive pin cannot be dropped when opened so there is no risk of loss. Forged in 316L stainless steel. Designed and made in France. A= Inside height B= Opening width
Wichard 1423 Captive Pin Twisted Shackle, 1/4" - 1423 - 905-1423F1
Self-locking captive pin cannot be dropped when opened so there is no risk of loss. Forged in 316L stainless steel. Designed and made in France. A= Inside height B= Opening width
Wichard 1432 Key Pin Shackle, 3/16" - 1432 - 905-1432F1
Key pin shackles offer many advantages. The pin can easily be opened by a single half turn, but remains captive within the body of the shackle. Forged in 316L stainless steel. Designed and made in France. A= Inside height B= Opening width
Wichard 1433 Key Pin Shackle, 1/4" - 1433 - 905-1433F1
Key pin shackles offer many advantages. The pin can easily be opened by a single half turn, but remains captive within the body of the shackle. Forged in 316L stainless steel. Designed and made in France. A= Inside height B= Opening width
Wichard 1443 Captive Pin Bow Shackle, 1/4" - 1443 - 905-1443F1
Self-locking captive pin cannot be dropped when opened so there is no risk of loss. Forged in 316L stainless steel. Designed and made in France. A= Inside height B= Opening width
Wichard 1445 Captive Pin Bow Shackle, 3/8" - 1445 - 905-1445F1
Self-locking captive pin cannot be dropped when opened so there is no risk of loss. Forged in 316L stainless steel. Designed and made in France. A= Inside height B= Opening width
Wichard 2373 "Hr" Large Bail Swivel Eye Snap Shackle, 5/8" - 2373 - 905-2373F1
Forged in HR stainless steel. Opens easily under load, even at a distance (with a line or webbing). Indispensable for spinnakers, they are useful for any application which requires release under load (towing, lifting or material handling). Made in France.
Wichard 2384 Swivel Snap Hook, 2-3/4" - 2384 - 905-2384F1
Forged in 316L stainless steel. Made in France.
Wichard 2385 Swivel Snap Hook, 4" - 2385 - 905-2385F1
Forged in 316L stainless steel. Made in France.
Wichard 2470 Fixed Eye Snap Shackle, 5/16" - 2470 - 905-2470F1
Forged stainless steel. Made in France.
