Select Category
Hardware & Deck
Seadog 432590 Trumpet Horn Tube Cover | Fits All Sea-Dog Air Horns & Max Blast Electric Trumpet Horns - 432590-1 - 354-4325901F1
Sea-Dog Line, Lines & Rigging
$34.09
Stainless steel trumpet tube cover fits all Sea-Dog air horns and the Max Blast electric trumpet horns. Keeps green water and bugs from getting into the trumpet tube, and snaps over the end of the tub... More Details
Seadog 432597 Universal 20 Amp 11 Psi 12V Air Horn Compressor With Side Air Exit - Fits Sea-Dog Maxblast Air Horns - 432597-1 - 354-4325971F1
Sea-Dog Line, Lines & Rigging
$113.69
Universal Air Horn Compressor with Side Air Exit works with all Sea-Dog® MaxBlast air horns. For use in tight installation applications where a side air hose attachment is required. Does not include a... More Details
Seadog 432620 Maxblast 20 Amp 125 Db 12V 11 Psi Dual 9-5/8" Trumpet Air Horn - Chrome Plated Brass - 432620-1 - 354-4326201F1
Sea-Dog Line, Lines & Rigging
$648.69
MaxBlast Mini Dual Trumpet Air Horn is constructed of durable chrome plated brass. When installed, the trumpet should point slightly downward to permit water drainage. Display pack includes horn, comp... More Details
Seadog 491055 Boat Hook Mooring Buoy Snap Kit - #8 Fastener - Cast 316 & 304 Stamped Stainless - 491055-1 - 354-4910551F1
Sea-Dog Line, Docking & Fendering
$53.19
The Boat Hook Mooring Buoy Snap Kit is the convenient and easy solution for attaching a mooring line to a buoy or cleat. Using the included keeper plate, these channeled 316 stainless steel snaps fit ... More Details
Seadog 491105 Boat Hook Universal Thread 15" Microfiber Mop - 491105-1 - 354-4911051F1
Sea-Dog Line, Lines & Rigging
$50.69
Boat Hook Microfiber Mop provides gentle and effective cleaning action with its soft straps. The fast-drying microfiber is highly absorbent and scratch resistant, preventing water spots. Fits all Sea-... More Details
Seadog 4911081 Boat Hook Hull Scraper - 491108-1 - 354-4911081F1
Sea-Dog Line, Lines & Rigging
$19.99
Boat Hook Hull Scraper can be attached to any Sea-Dog® Boat Hook/Boat Pole or universal/Acme threaded device. Great for waterline cleaning from inside the vessel.... More Details
Seadog 491115 Boat Hook Mooring Cover Support Crown 1" X 15' Webbing Strap Kit, Pack Of 3 Straps - 491115-1 - 354-4911151F1
Sea-Dog Line, Docking & Fendering
$44.79
These Boat Hook Mooring Cover Support Crown Webbing Straps are used for positioning the Mooring Cover Support Crown (491110-1) securely in place. Includes three 15' straps, with a securing loop on one... More Details
Seadog 491713 Flush Mount 25 Degree Flag Pole Socket | #12 Fastener | Investment Cast 316 Stainless - 491713-1 - 354-4917131F1
Sea-Dog Line, Lines & Rigging
$50.29
25° Flush Mount Flagpole Socket is used for flagpoles up to 1-1/4" in diameter. Maximum speed 10 MPH. Constructed of investment cast 316 stainless. Installs with three #12 FH fasteners (not included).... More Details
Seadog 492213 Flagpole 10 Degree Socket | #10 Fastener | Sand Cast Brass Chrome Plated - 492213-1 - 354-4922131F1
Sea-Dog Line, Lines & Rigging
$44.79
10° Flagpole Socket is used for flagpoles up to 1-1/4" in diameter. Maximum speed 10 MPH. Constructed of chrome plated sand cast brass for durability and corrosion resistance. Installs with three FH f... More Details
Seadog 5010723 Premium Electric Oil Pump, 12V - 501072-3 - 354-5010723F1
Sea-Dog Line, Lines & Rigging
$129.99
This portable, lightweight Premium Electric Oil Pump is easy to use and transport. The self-priming 12V pump attaches to battery terminals with alligator clips and drains oil through the dipstick tube... More Details
Seadog 502150H1 Lower Unit Standard Pump - 502150H-1 - 354-502150H1F1
Sea-Dog Line, Lines & Rigging
$12.29
Nylon/aluminum. Standard Pump fits quart oil bottles. Flexible hose gets to hard to reach locations. Threaded (3/8"-16) fitting fits Mercruiser, OMC, Evinrude, Johnson, Honda (70hp & up), Volvo, Force... More Details
Seadog 512110 Fresh Water Inlet | #8 Fastener | Brass Chrome Plated | Includes Cap & Chain - 512110-1 - 354-5121101F1
Sea-Dog Line, Anchoring
$46.89
Designed to provide a fresh water hookup to a pressurized water system while moored. Has standard female swivel hose connector. Complete with black plastic, water tight plug when not connected to on s... More Details
Seadog 520060 Captive Garboard Drain & Plug | #8 Fastener | Investment Cast 316 Stainless - 520060 - 354-520060F1
Sea-Dog Line, Lines & Rigging
$41.39
This Captive Garboard Drain & Plug is a direct replacement for the bronze, traditional style Sea-Dog® Garboards (520040 and 520042). Captive plug prevents plug from being lost. Constructed of investme... More Details
Seadog 521550 Telescoping 15-1/2" To 24-1/2" Inboard Motor Flusher - Molded Rubber & Aluminum - 521550-1 - 354-5215501F1
Sea-Dog Line, Lines & Rigging
$27.89
Inboard Motor Flush quickly flushes away salt, sand, minerals, and contaminates from your lower unit cooling system extending the engine's service life. Easy-to-use by fitting the rubber cup over the ... More Details
Seadog 5216301 Motor Well Boot, 3" W/Ring - 521630-1 - 354-5216301F1
Sea-Dog Line, Lines & Rigging
$7.95
Motor Well Boot organizes and protects engine control cables, wires, or fuel lines. Black accordion-style seal. UV stabilized molded rubber. Includes mounting ring. Installs with six #8 RH fasteners (... More Details
Seadog 5216551 Motor Well Boot, 5-1/2" - 521655-1 - 354-5216551F1
Sea-Dog Line, Lines & Rigging
$24.46
Motor Well Boot organizes and protects engine control cables, wires, or fuel lines. Black accordion-style seal. UV stabilized molded rubber. Includes mounting ring. Installs with six #8 RH fasteners (... More Details
Seadog 521663-1 Motor Well Boot - 4-1/8" Split - 521663-1 - 354-5216631F1
Sea-Dog Line, Lines & Rigging
$10.78
Molded rubber/injection molded nylon. Black accordion style seal organizes and protects engine control cables, wires or fuel lines. UV stabilized molded rubber. Boots and rings are cut for trouble fre... More Details
Seadog 521664-1 Motor Well Boot - 5-1/2" Split - 521664-1 - 354-5216641F1
Sea-Dog Line, Lines & Rigging
$13.41
Molded rubber/injection molded nylon. Black accordion style seal organizes and protects engine control cables, wires or fuel lines. UV stabilized molded rubber. Boots and rings are cut for trouble fre... More Details
Seadog 563255 Cast 17-4Ph Grade Stainless Adjustable Wrench - Includes 1/4" Hex Head & Bottle Opener - 563255-1 - 354-5632551F1
Sea-Dog Line, Lines & Rigging
$64.99
Stainless steel adjustable wrench is made to last a lifetime under any conditions. Includes, 1/4" hex head and bottle opener. Cast 17-4ph stainless.... More Details
Seadog 5805701 Brass Round Horn Oarlocks, Pr. - 580570-1 - 354-5805701F1
Sea-Dog Line, Lines & Rigging
$65.59
Constructed of traditional, durable sand cast brass. 1/2" shaft. The horns secure the oar in place in all sea conditions.... More Details
Seadog 5805901 Brass Round Horn Oarlocks, Pr. - 580590-1 - 354-5805901F1
Sea-Dog Line, Lines & Rigging
$72.29
Constructed of traditional, durable sand cast brass. 1/2" shaft. The horns secure the oar in place in all sea conditions.... More Details
Seadog 5805911 Brass Round Horn Oarlocks, A: 1/2" B: 2-1/8" - 580591-1 - 354-5805911F1
Sea-Dog Line, Lines & Rigging
$65.29
Constructed of traditional, durable sand cast brass. 1/2" shaft. The horns secure the oar in place in all sea conditions.... More Details
Seadog 5806001 Brass Oarlock Sockets, Top Mt., Pr. - 580600-1 - 354-5806001F1
Sea-Dog Line, Lines & Rigging
$44.89
Constructed of traditional, durable sand cast brass. Oarlock mounts accept 1/2" shafts and feature polyethylene inserts (#580699) for smooth rotation.... More Details
Seadog 5806101 Brass Oarlock Sockets, Side Mt., A:1/2" B: 3-5/8" - 580610-1 - 354-5806101F1
Sea-Dog Line, Lines & Rigging
$52.79
Constructed of traditional, durable sand cast brass. Oarlock mounts accept 1/2" shafts and feature polyethylene inserts (#580699) for smooth rotation.... More Details
Seadog 5806201 Bronze Angle Mount Oarlock Socket, A: 1/2" C:1-1/16" - 580620-1 - 354-5806201F1
Sea-Dog Line, Lines & Rigging
$63.59
Constructed of traditional, durable sand cast brass. Oarlock mounts accept 1/2" shafts and feature polyethylene inserts (#580699) for smooth rotation.... More Details
Seadog 588060 Flush Mt Drink Holder Combo Black - 588060 - 354-588060F1
Sea-Dog Line, Lines & Rigging
$3.00
Flush Mount Combo Drink Holders feature a dual-purpose design which allows the use of beverage cans with or without insulated can wraps, as well as most standard size bottles. Installation requires a ... More Details
Seadog 588061 Flush Mt Drink Holder Combo White - 588061 - 354-588061F1
Sea-Dog Line, Lines & Rigging
$3.18
Flush Mount Combo Drink Holders feature a dual-purpose design which allows the use of beverage cans with or without insulated can wraps, as well as most standard size bottles. Installation requires a ... More Details
Seadog 604080 It Floats™ - Locking Winch Handle, 8" - 604080 - 354-604080F1
Sea-Dog Line, Lines & Rigging
$68.59
It Floats™ Locking Winch Handle's patented design is made by air assist injection molding instead of a foam filled method, thus preventing any potential leakage of foam from within the handle. Feature... More Details
Seadog 604100 It Floats™ - Locking Winch Handle, 10" - 604100 - 354-604100F1
Sea-Dog Line, Lines & Rigging
$70.79
It Floats™ Locking Winch Handle's patented design is made by air assist injection molding instead of a foam filled method, thus preventing any potential leakage of foam from within the handle. Feature... More Details
Seadog 6714601 Hammock Hooks - Stainless, 2/Cd - 671460-1 - 354-6714601F1
Sea-Dog Line, Lines & Rigging
$6.59
Hammock Hooks are designed with an extra bend for additional holding power. Ideal for fender and lashing hook applications. Corrosion resistant stamped 304 stainless steel construction. Installs with ... More Details
Seadog 6725601 Fender Hook, Sold Each - 672560-1 - 354-6725601F1
Sea-Dog Line, Docking & Fendering
$32.99
This Fender Hook can be used for quick and easy placement of fenders. Designed to be installed on the gunwale for use with up to 3/8" line. The spring loaded hook keeps line captive against surface. C... More Details
Seadog 7271303 Pvc Low Profile Cowl Vent & Snap On Deck Plate - 727130-3 - 354-7271303F1
Sea-Dog Line, Lines & Rigging
$50.29
Low Profile Cowl Vents with Snap-On Deck Plates are designed for air intake or cabin ventilation when used in conjunction with a dorade box. Great for bilge ventilation with or without a blower. Ideal... More Details
Seadog 7271323 Pvc Low Profile Cowl Vent & Snap On Deck Plate - 727132-3 - 354-7271323F1
Sea-Dog Line, Lines & Rigging
$47.96
Low Profile Cowl Vents with Snap-On Deck Plates are designed for air intake or cabin ventilation when used in conjunction with a dorade box. Great for bilge ventilation with or without a blower. Ideal... More Details
Seadog 7271353 Pvc Standard Profile Cowl Vent & Snap On Deck Plate, White With Red Interior - 727135-3 - 354-7271353F1
Sea-Dog Line, Lines & Rigging
$68.29
Standard Cowl Vents with Snap-On Deck Plates are designed for air intake or cabin ventilation when used in conjunction with a dorade box. Great for bilge ventilation with or without a blower. Promotes... More Details
Seadog 7271373 Pvc Standard Profile Cowl Vent & Snap On Deck Plate, White - 727137-3 - 354-7271373F1
Sea-Dog Line, Lines & Rigging
$63.29
Standard Cowl Vents with Snap-On Deck Plates are designed for air intake or cabin ventilation when used in conjunction with a dorade box. Great for bilge ventilation with or without a blower. Promotes... More Details
Seadog 7271403 Pvc Low Profile Cowl Vent & Snap On Deck Plate - 727140-3 - 354-7271403F1
Sea-Dog Line, Lines & Rigging
$68.58
Low Profile Cowl Vents with Snap-On Deck Plates are designed for air intake or cabin ventilation when used in conjunction with a dorade box. Great for bilge ventilation with or without a blower. Ideal... More Details
Seadog 7271423 Pvc Low Profile Cowl Vent & Snap On Deck Plate - 727142-3 - 354-7271423F1
Sea-Dog Line, Lines & Rigging
$67.79
Low Profile Cowl Vents with Snap-On Deck Plates are designed for air intake or cabin ventilation when used in conjunction with a dorade box. Great for bilge ventilation with or without a blower. Ideal... More Details
Seadog 7271453 Pvc Standard Profile Cowl Vent & Snap On Deck Plate, White With Red Interior - 727145-3 - 354-7271453F1
Sea-Dog Line, Lines & Rigging
$83.82
Standard Cowl Vents with Snap-On Deck Plates are designed for air intake or cabin ventilation when used in conjunction with a dorade box. Great for bilge ventilation with or without a blower. Promotes... More Details
Seadog Adjustable Pantographic Wiper Arm - Hook Style, 13"-18" - 413368B-1 - 354-413368B1F1
Sea-Dog Line, Lines & Rigging
$179.19
Adjustable J-Hook (automotive style) Pantograph Wiper Arm fits all standard MRV and heavy duty waterproof wiper motors with 5/8" shaft diameter. Compatible with 1.5 and 2.5" shafts. Powder coated 304 ... More Details
Seadog Adjustable Pantographic Wiper Arm - Hook Style, 19"-24" - 413374B-1 - 354-413374B1F1
Sea-Dog Line, Lines & Rigging
$185.39
Adjustable J-Hook (automotive style) Pantograph Wiper Arm fits all standard MRV and heavy duty waterproof wiper motors with 5/8" shaft diameter. Compatible with 1.5 and 2.5" shafts. Powder coated 304 ... More Details
Seadog Adjustable Wiper Arm - Hook Style W/Adjustable Pivoting Tip, 13"-18" - 413268B-1 - 354-413268B1F1
Sea-Dog Line, Lines & Rigging
$83.99
Adjustable J-Hook (automotive style) Wiper Arm with Adjustable Pivoting Tip fits all standard MRV and heavy duty waterproof wiper motors with 5/8" shaft diameter. Compatible with 1.5 and 2.5" shafts. ... More Details
Seadog Adjustable Wiper Arm - Hook Style W/Adjustable Pivoting Tip, 19"-24" - 413274B-1 - 354-413274B1F1
Sea-Dog Line, Lines & Rigging
$84.39
Adjustable J-Hook (automotive style) Wiper Arm with Adjustable Pivoting Tip fits all standard MRV and heavy duty waterproof wiper motors with 5/8" shaft diameter. Compatible with 1.5 and 2.5" shafts. ... More Details
Seadog Adjustable Wiper Arm - Hook Style, 13"-18" - 413168B-1 - 354-413168B1F1
Sea-Dog Line, Lines & Rigging
$70.99
Adjustable J-Hook (automotive style) Wiper Arm fits all standard MRV and heavy duty waterproof wiper motors with 5/8" shaft diameter. Compatible with 1.5 and 2.5" shafts. Powder coated 304 stainless s... More Details
Seadog Adjustable Wiper Arm - Hook Style, 19"-24" - 413174B-1 - 354-413174B1F1
Sea-Dog Line, Lines & Rigging
$70.99
Adjustable J-Hook (automotive style) Wiper Arm fits all standard MRV and heavy duty waterproof wiper motors with 5/8" shaft diameter. Compatible with 1.5 and 2.5" shafts. Powder coated 304 stainless s... More Details
Seadog Butt Hinge With Bearings | Commercial Pattern | Investment Cast 316 Stainless | 1/4" Fastener - 205242 - 354-205242F1
Sea-Dog Line, Lines & Rigging
$72.39
Constructed of investment cast 316 stainless steel these Butt Hinges are designed for applications where both extra strength and corrosion resistance are required. The integral nylon bearings promote ... More Details
Seadog Butt Hinge With Bearings | Commercial Pattern | Investment Cast 316 Stainless | 1/4" Fastener - 205243 - 354-205243F1
Sea-Dog Line, Lines & Rigging
$85.19
Constructed of investment cast 316 stainless steel these Butt Hinges are designed for applications where both extra strength and corrosion resistance are required. The integral nylon bearings promote ... More Details
Seadog Butt Hinge With Bearings | Commercial Pattern | Investment Cast 316 Stainless | 1/4" Fastener - 205244 - 354-205244F1
Sea-Dog Line, Lines & Rigging
$96.59
Constructed of investment cast 316 stainless steel these Butt Hinges are designed for applications where both extra strength and corrosion resistance are required. The integral nylon bearings promote ... More Details
Seadog Butt Hinge With Bearings | Commercial Pattern | Investment Cast 316 Stainless | 1/4" Fastener - 205246 - 354-205246F1
Sea-Dog Line, Lines & Rigging
$119.39
Constructed of investment cast 316 stainless steel these Butt Hinges are designed for applications where both extra strength and corrosion resistance are required. The integral nylon bearings promote ... More Details
Seadog Cast Polished Brass Bell - #6 Fastener - 455001 - 354-455001F1
Sea-Dog Line, Lines & Rigging
$154.99
These Bells are constructed of improved cast brass (not lower grade spun brass). Meets Coast Guard, ABYC, and NMMA requirements (200 cm mouth opening and striker mass no less than 3% of mass of the be... More Details
Seadog Cast Polished Brass Bell | #6 Fastener - 455720 - 354-455720F1
Sea-Dog Line, Lines & Rigging
$237.59
These Bells are constructed of improved cast brass (not lower grade spun brass). 8" Bells meets Coast Guard, ABYC, and NMMA requirements (200 cm mouth opening and striker mass no less than 3% of mass ... More Details
Seadog Cast Polished Brass Bell | #6 Fastener - 455721 - 354-455721F1
Sea-Dog Line, Lines & Rigging
$256.99
These Bells are constructed of improved cast brass (not lower grade spun brass). 8" Bells meets Coast Guard, ABYC, and NMMA requirements (200 cm mouth opening and striker mass no less than 3% of mass ... More Details
Seadog Clam Shell Vent | Stamped 304 Stainless | #6 Fastener - 331335-1 - 354-3313351F1
Sea-Dog Line, Lines & Rigging
$52.19
Clam shell ventilators provide splash protection for vent holes, wire or cable runs and blower-exhaust hose openings. 304 stamped stainless steel construction. Can be used for cabin ventilation with d... More Details
Seadog Clam Shell Vent | Stamped 304 Stainless | #6 Fastener - 331340-1 - 354-3313401F1
Sea-Dog Line, Lines & Rigging
$82.79
Clam shell ventilators provide splash protection for vent holes, wire or cable runs and blower-exhaust hose openings. 304 stamped stainless steel construction. Can be used for cabin ventilation with d... More Details
Seadog Clam Shell Vent | Stamped 304 Stainless | #6 Fastener - 331350-1 - 354-3313501F1
Sea-Dog Line, Lines & Rigging
$88.39
Clam shell ventilators provide splash protection for vent holes, wire or cable runs and blower-exhaust hose openings. 304 stamped stainless steel construction. Can be used for cabin ventilation with d... More Details
Seadog Combination Soft Bristle Brush & Squeegee - 491075-1 - 354-4910751F1
Sea-Dog Line, Lines & Rigging
$28.89
The Boat Hook Combination Soft Bristle Brush & Squeegee fits all Sea-Dog® Boat Hooks and universal/Acme threaded devices. This soft brush is constructed of injection molded nylon with a marine grade s... More Details
Seadog Deluxe Hand Held Rope Cutter - 300095-3 - 354-3000953F1
Sea-Dog Line, Lines & Rigging
$545.89
Easily cuts nylon, polyester, polypropylene and Dacron cordage and webbing Cuts and heat seals at the same timeReplaceable blade heats to 1100° Fahrenheit (600° Celsius) in less than 10 secondsBrass b... More Details
Drain Tube Flaring Tools for installing 1" drain tubes. Can be used to install all of Sea-Dog® Drain Tubes (520210-520430). Handy item for any toolbox. Drain tube not included.... More Details
Seadog Fillet Table Rod Holder Mount - 326510-3 - 354-3265103F1
Sea-Dog Line, Lines & Rigging
$283.39
Solid one-piece construction for long life and easy maintenanceEasily adjustable, multi-position gimbaled rod holder mounting system folds flat for easy storageUV stabilized high-density polypropylene... More Details
Seadog Fillet Table Rod Holder Mount - 326515-3 - 354-3265153F1
Sea-Dog Line, Lines & Rigging
$363.49
Solid one-piece construction for long life and easy maintenanceEasily adjustable, multi-position gimbaled rod holder mounting system folds flat for easy storageUV stabilized high-density polypropylene... More Details
Soft Grip Handle with concealed fasteners (included). Constructed of injection molded nylon with PVC coating.... More Details
Soft Grip Handle with concealed fasteners (included). Constructed of injection molded nylon with PVC coating.... More Details
Seadog Hand Rail Bow Form, Outside Diameter 7/8", 316 Stainless - 295110-1 - 354-2951101F1
Sea-Dog Line, Lines & Rigging
$64.29
These Hand Rail Tees are constructed of investment cast 316 stainless steel for corrosion resistance and durability. Includes set screws where appropriate. Designed for use with 7/8" stainless tubing ... More Details
Seadog Hatch Adjuster | Formed & Stamped 304 Stainless & Nylon - 321291-1 - 354-3212911F1
Sea-Dog Line, Lines & Rigging
$65.39
Hatch Latches are constructed of corrosion resistant stamped 304 stainless steel. Simple screw-in action holds hatch securely in closed position. Installs with four #10 RH fasteners (not included).... More Details
Seadog Hatch Adjuster | Formed & Stamped 304 Stainless & Nylon - 321292-1 - 354-3212921F1
Sea-Dog Line, Lines & Rigging
$60.49
Hatch Latches are constructed of corrosion resistant stamped 304 stainless steel. Simple screw-in action holds hatch securely in closed position. Installs with four #10 RH fasteners (not included).... More Details
Seadog Hatch Adjuster | Formed & Stamped 304 Stainless & Nylon - 321295-1 - 354-3212951F1
Sea-Dog Line, Lines & Rigging
$55.89
Constructed of corrosion resistant formed 304 stainless steel with UV resistant injection molded nylon mounting pads and knob. These Hatch Adjusters feature a simple twist knob to lock into position. ... More Details
Seadog Hatch Adjuster | Formed & Stamped 304 Stainless & Nylon - 321296-1 - 354-3212961F1
Sea-Dog Line, Lines & Rigging
$57.99
Constructed of corrosion resistant formed 304 stainless steel with UV resistant injection molded nylon mounting pads and knob. These Hatch Adjusters feature a simple twist knob to lock into position. ... More Details
Constructed of chrome plated sand cast brass these Hatch Pulls are ideal for use on doors, hatches, lazarettes, and dock boxes. Handle pivots out to open hatches and lays flush when not in use for a c... More Details
Seadog Large Boat Hook Mooring Buoy Snap Kit - 491058-1 - 354-4910581F1
Sea-Dog Line, Docking & Fendering
$226.19
The Large Boat Hook Mooring Buoy Snap Kit is the convenient and easy solution for attaching a mooring line to a buoy or cleat. Using the included keeper plate, these channeled 316 stainless steel snap... More Details
Investment Cast 316 Stainless. Use #10 FH fasteners.... More Details
Seadog Maxblast 11 Psi Air Horn 2-1/2" X 4" Compressor, 12V - 432599-1 - 354-4325991F1
Sea-Dog Line, Lines & Rigging
$113.39
MaxBlast Air Horn Compressor works with all Sea-Dog® MaxBlast air horns. For use in standard installations where head room is not an issue. Does not include air tubing or mounting hardware. 12VDC. Max... More Details
Seadog Maxblast 11 Psi Air Horn 2-1/2" X 4" Compressor, 24V - 432598-1 - 354-4325981F1
Sea-Dog Line, Lines & Rigging
$124.59
MaxBlast Air Horn Compressor works with all Sea-Dog® MaxBlast air horns. For use in standard installations where head room is not an issue. Does not include air tubing or mounting hardware. 24VDC. Max... More Details
Seadog Maxblast 20 Amp 124 Db 12V 11 Psi Mini Single 9-5/8" Trumpet Air Horn - 432610-1 - 354-4326101F1
Sea-Dog Line, Lines & Rigging
$418.09
MaxBlast Mini Single Trumpet Air Horn is constructed of durable chrome plated brass. When installed, the trumpet should point slightly downward to permit water drainage. Display pack includes horn, co... More Details
Seadog Maxblast 20 Amp 124 Db 12V 11 Psi Mini Single 9-5/8" Trumpet Air Horn - 432611-1 - 354-4326111F1
Sea-Dog Line, Lines & Rigging
$383.79
MaxBlast Mini Single Trumpet Air Horn is constructed of durable chrome plated brass. When installed, the trumpet should point slightly downward to permit water drainage. Display pack includes horn, co... More Details
Seadog Non-Watertight Slam Latch | Investment Cast 316 Stainless | 1/8" Fastener | 1-1/2" Diameter - 221961 - 354-221961F1
Sea-Dog Line, Lines & Rigging
$50.79
Constructed of 316 stainless steel for corrosion resistance and durability. These slam latches feature push to close functionality. Activated by the shutting or slamming of a door slam latches are des... More Details
Seadog Non-Watertight Slam Latch | Investment Cast 316 Stainless | 1/8" Fastener | 1-1/2" Diameter - 221961L - 354-221961Lf1
Sea-Dog Line, Lines & Rigging
$55.89
Constructed of 316 stainless steel for corrosion resistance and durability. These slam latches feature push to close functionality. Activated by the shutting or slamming of a door slam latches are des... More Details
Seadog Op27001 Replacement Screw For Deck Hinges - Op27001 - 354-Op27001F1
Sea-Dog Line, Lines & Rigging
$1.94
Screw for 270160, 270161, 270200, 270230 & 270240... More Details
Seadog Op27002 Release Pin For 270210, 270235 & 270245 - Op27002 - 354-Op27002F1
Sea-Dog Line, Lines & Rigging
$14.17
Release Pin for 270210, 270235 & 270245... More Details
Seadog Op273031 Replacement Screw For Deck Hinges - Op27303-1 - 354-Op273031F1
Sea-Dog Line, Lines & Rigging
$4.29
Screw for 2732501 & 2732711... More Details
Seadog Powder Coated Aluminum & Stainless Waterproof Heavy Duty 12V Wiper Motor | Black Finish - 412211B-3 - 354-412211B3F1
Sea-Dog Line, Lines & Rigging
$278.99
Waterproof Heavy Duty Wiper Motors are a two-speed, self-parking motor for exterior/unprotected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 11... More Details
Seadog Powder Coated Aluminum & Stainless Waterproof Heavy Duty 12V Wiper Motor | Black Finish - 412218B-3 - 354-412218B3F1
Sea-Dog Line, Lines & Rigging
$278.99
Waterproof Heavy Duty Wiper Motors are a two-speed, self-parking motor for exterior/unprotected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 11... More Details
Seadog Powder Coated Aluminum & Stainless Waterproof Heavy Duty 12V Wiper Motor | Black Finish - 412221B-3 - 354-412221B3F1
Sea-Dog Line, Lines & Rigging
$282.69
Waterproof Heavy Duty Wiper Motors are a two-speed, self-parking motor for exterior/unprotected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 11... More Details
Seadog Powder Coated Aluminum & Stainless Waterproof Heavy Duty 12V Wiper Motor | Black Finish - 412228B-3 - 354-412228B3F1
Sea-Dog Line, Lines & Rigging
$282.69
Waterproof Heavy Duty Wiper Motors are a two-speed, self-parking motor for exterior/unprotected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 11... More Details
Seadog Powder Coated Aluminum & Stainless Waterproof Heavy Duty 12V Wiper Motor | Black Finish - 412231B-3 - 354-412231B3F1
Sea-Dog Line, Lines & Rigging
$282.69
Waterproof Heavy Duty Wiper Motors are a two-speed, self-parking motor for exterior/unprotected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 11... More Details
Seadog Powder Coated Aluminum & Stainless Waterproof Heavy Duty 12V Wiper Motor | Black Finish - 412238B-3 - 354-412238B3F1
Sea-Dog Line, Lines & Rigging
$282.69
Waterproof Heavy Duty Wiper Motors are a two-speed, self-parking motor for exterior/unprotected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 11... More Details
Seadog Powder Coated Aluminum & Stainless Waterproof Heavy Duty 12V Wiper Motor | White Finish - 412211W-3 - 354-412211W3F1
Sea-Dog Line, Lines & Rigging
$290.99
Waterproof Heavy Duty Wiper Motors are a two-speed, self-parking motor for exterior/unprotected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 11... More Details
Seadog Powder Coated Aluminum & Stainless Waterproof Heavy Duty 12V Wiper Motor | White Finish - 412218W-3 - 354-412218W3F1
Sea-Dog Line, Lines & Rigging
$278.99
Waterproof Heavy Duty Wiper Motors are a two-speed, self-parking motor for exterior/unprotected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 11... More Details
Seadog Powder Coated Aluminum & Stainless Waterproof Heavy Duty 12V Wiper Motor | White Finish - 412221W-3 - 354-412221W3F1
Sea-Dog Line, Lines & Rigging
$282.69
Waterproof Heavy Duty Wiper Motors are a two-speed, self-parking motor for exterior/unprotected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 11... More Details
Seadog Powder Coated Aluminum & Stainless Waterproof Heavy Duty 12V Wiper Motor | White Finish - 412228W-3 - 354-412228W3F1
Sea-Dog Line, Lines & Rigging
$294.89
Waterproof Heavy Duty Wiper Motors are a two-speed, self-parking motor for exterior/unprotected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 11... More Details
Seadog Powder Coated Aluminum & Stainless Waterproof Heavy Duty 12V Wiper Motor | White Finish - 412231W-3 - 354-412231W3F1
Sea-Dog Line, Lines & Rigging
$294.89
Waterproof Heavy Duty Wiper Motors are a two-speed, self-parking motor for exterior/unprotected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 11... More Details
Seadog Powder Coated Aluminum & Stainless Waterproof Heavy Duty 12V Wiper Motor | White Finish - 412238W-3 - 354-412238W3F1
Sea-Dog Line, Lines & Rigging
$282.69
Waterproof Heavy Duty Wiper Motors are a two-speed, self-parking motor for exterior/unprotected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 11... More Details
Seadog Powder Coated Aluminum & Stainless Waterproof Heavy Duty 24V Wiper Motor | White Finish - 412268W-3 - 354-412268W3F1
Sea-Dog Line, Lines & Rigging
$278.99
Waterproof Heavy Duty Wiper Motors are a two-speed, self-parking motor for exterior/unprotected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 11... More Details
Seadog Powder Coated Aluminum & Stainless Waterproof Heavy Duty 24V Wiper Motor | White Finish - 412278W-3 - 354-412278W3F1
Sea-Dog Line, Lines & Rigging
$278.99
Waterproof Heavy Duty Wiper Motors are a two-speed, self-parking motor for exterior/unprotected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 11... More Details
Seadog Powder Coated Aluminum & Stainless Waterproof Standard 12V Wiper Motor | 2-1/2" Shaft | White Finish - 412321W-3 - 354-412321W3F1
Sea-Dog Line, Lines & Rigging
$184.99
Waterproof Standard Wiper Motor for exterior/unprotected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 110°. Corrosion resistant powder coated a... More Details
Seadog Powder Coated Aluminum & Stainless Waterproof Standard 12V Wiper Motor | 2-1/2" Shaft | White Finish - 412328W-3 - 354-412328W3F1
Sea-Dog Line, Lines & Rigging
$184.99
Waterproof Standard Wiper Motor for exterior/unprotected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 110°. Corrosion resistant powder coated a... More Details
Forged steel hot dipped, galvanized construction with white vinyl PVC coating. This anchor lead chain features welded, over-sized end links for easy shackle attachment. White PVC coating provides corr... More Details
Seadog Quarter-Turn Deck Plate With Internal Collar | #8 Fastener | Black Finish - 336385-1 - 354-3363851F1
Sea-Dog Line, Lines & Rigging
$31.63
The Sea-Dog® Quarter-Turn Deck Plate is constructed of UV stabilized ABS. Features a new locking system that prevents over tightening, jamming, and cross threading. These deck plates also feature an i... More Details
Seadog Quarter-Turn Deck Plate With Internal Collar | #8 Fastener | Black Finish - 336387-1 - 354-3363871F1
Sea-Dog Line, Lines & Rigging
$31.63
The Sea-Dog® Quarter-Turn Deck Plate is constructed of UV stabilized ABS. Features a new locking system that prevents over tightening, jamming, and cross threading. These deck plates also feature an i... More Details
Seadog Quarter-Turn Deck Plate With Internal Collar | #8 Fastener | White Finish - 336360-1 - 354-3363601F1
Sea-Dog Line, Lines & Rigging
$29.19
The Sea-Dog® Quarter-Turn Deck Plate is constructed of UV stabilized ABS. Features a new locking system that prevents over tightening, jamming, and cross threading. These deck plates also feature an i... More Details
Seadog Quarter-Turn Deck Plate With Internal Collar | #8 Fastener | White Finish - 336362-1 - 354-3363621F1
Sea-Dog Line, Lines & Rigging
$27.99
The Sea-Dog® Quarter-Turn Deck Plate is constructed of UV stabilized ABS. Features a new locking system that prevents over tightening, jamming, and cross threading. These deck plates also feature an i... More Details
Seadog Quarter-Turn Deck Plate With Internal Collar | #8 Fastener | White Finish - 336380-1 - 354-3363801F1
Sea-Dog Line, Lines & Rigging
$33.29
The Sea-Dog® Quarter-Turn Deck Plate is constructed of UV stabilized ABS. Features a new locking system that prevents over tightening, jamming, and cross threading. These deck plates also feature an i... More Details
