Select Category
Hardware & Deck
Tie Down Engineering 86262 Galvanized Fender Brackets, 2/Pk - 86262 - 241-86262F1
Flush Brackets for 8" & 12" Metal Fenders.
Tie Down Engineering 86264 Galvanized Metal Fender - 86264 - 241-86264F1
Heavy duty stamped 16 gauge galvanized steel. Fenders can be drilled to fit a variety of mounting options. Mounting brackets sold separately.
Tie Down Engineering 86265 Galvanized Metal Fender - 86265 - 241-86265F1
Heavy duty stamped 16 gauge galvanized steel. Fenders can be drilled to fit a variety of mounting options. Mounting brackets sold separately.
Tie Down Engineering 86266 Galvanized Metal Fender - 86266 - 241-86266F1
Heavy duty stamped 16 gauge galvanized steel. Fenders can be drilled to fit a variety of mounting options. Mounting brackets sold separately.
Tie Down Engineering 86267 Galvanized Metal Fender - 86267 - 241-86267F1
Heavy duty stamped 16 gauge galvanized steel. Fenders can be drilled to fit a variety of mounting options. Mounting brackets sold separately.
Tie Down Engineering 86269 Aluminum Adjustable Teardrop Fender - 86269 - 241-86269F1
Heavy duty fenders made from .083" gauge diamond plate aluminum. Tandem tear drop trailer fender can be adjusted from 60" to 72". Mounting hardware not included.
Tie Down Engineering 86582 Jeep Single Fender, Smooth Aluminum - 86582 - 241-86582F1
Heavy duty stamped fenders can be drilled to fit a variety of mounting options. Mounting hardware not included.
Tie Down Engineering 86583 Jeep Single Fender, Aluminum Tread - 86583 - 241-86583F1
Heavy duty stamped fenders can be drilled to fit a variety of mounting options. Mounting hardware not included.
Tie Down Engineering 86584 Round Single Fender, Smooth Aluminum - 86584 - 241-86584F1
Heavy duty stamped fenders can be drilled to fit a variety of mounting options. Mounting hardware not included.
Tie Down Engineering 86585 Round Single Fender, Aluminum Tread - 86585 - 241-86585F1
Heavy duty stamped fenders can be drilled to fit a variety of mounting options. Mounting hardware not included.
Tie Down Engineering 86586 Teardrop Fender, Smooth Aluminum - 86586 - 241-86586F1
Heavy duty stamped fenders can be drilled to fit a variety of mounting options. Mounting hardware not included.
Tie Down Engineering 86587 Teardrop Fender, Aluminum Tread - 86587 - 241-86587F1
Heavy duty stamped fenders can be drilled to fit a variety of mounting options. Mounting hardware not included.
Tie Down Engineering 86588 Flare Teardrop Fender, Smooth Aluminum - 86588 - 241-86588F1
Heavy duty stamped fenders can be drilled to fit a variety of mounting options. Mounting hardware not included.
Tie Down Engineering Axle Spindles Includes Nut, Washer And Cotter Pin - 80055 - 641-80055 Superseded By: 641-K71G0190F1
Includes nut, washer, and cotter pin. Bearings not included.
Tie Down Engineering Axle Spindles Includes Nut, Washer And Cotter Pin - 80060 - 641-80060 Superseded By: 641-K71G0189F1
Includes nut, washer, and cotter pin. Bearings not included.
Tie Down Engineering Axle Spindles Includes Nut, Washer And Cotter Pin - 80235 - 641-80235 Superseded By: 641-K71G0307F1
Includes nut, washer, and cotter pin. Bearings not included.
Tie Down Engineering Axle Spindles Includes Nut, Washer And Cotter Pin - 80325 - 641-80325 Superseded By: 641-K71G0191F1
Includes nut, washer, and cotter pin. Bearings not included.
Tie Down Engineering Bow Safety Chain 3/16" X 15-1/2" - 81201 - 241-81201F1
Connects the boat to the bow stand of the trailer. 3/16" x 12 links.
Tie Down Engineering Danforth Hi-Tensile Anchor - 94019 - 241-94019F1
Danforth's toughest, most durable anchor and features very high holding power. The flukes are fabricated for additional strength and then beveled to allow quick, deep bottom penetration. Shank is made from 4130 steel which treated for extra strength. Hot dipped galvanized finish. Model 5H for 31' boat size.
Tie Down Engineering Danforth Hi-Tensile Anchor - 94020 - 241-94020F1
Danforth's toughest, most durable anchor and features very high holding power. The flukes are fabricated for additional strength and then beveled to allow quick, deep bottom penetration. Shank is made from 4130 steel which treated for extra strength. Hot dipped galvanized finish. Model 12H for 42' boat size.
Tie Down Engineering Danforth Hi-Tensile Anchor - 94021 - 241-94021F1
Danforth's toughest, most durable anchor and features very high holding power. The flukes are fabricated for additional strength and then beveled to allow quick, deep bottom penetration. Shank is made from 4130 steel which treated for extra strength. Hot dipped galvanized finish. Model 20H for 50' boat size.
Tie Down Engineering Danforth Hi-Tensile Anchor - 94022 - 241-94022F1
Danforth's toughest, most durable anchor and features very high holding power. The flukes are fabricated for additional strength and then beveled to allow quick, deep bottom penetration. Shank is made from 4130 steel which treated for extra strength. Hot dipped galvanized finish. Model 35H for 64' boat size.
Tie Down Engineering Danforth Standard Anchor - 94010 - 241-94010F1
Have endured over 50 years giving reliable performance. Has the traditional good holding power which has always been associated with Danforth Standard anchors. The shank is made of high strength steel. The steel flukes are strong and wide. Each anchor has a hot dipped galvanized coating for long lasting protection. Model 2-1/2S for 10' boat size.
Tie Down Engineering Danforth Standard Anchor - 94011 - 241-94011F1
Have endured over 50 years giving reliable performance. Has the traditional good holding power which has always been associated with Danforth Standard anchors. The shank is made of high strength steel. The steel flukes are strong and wide. Each anchor has a hot dipped galvanized coating for long lasting protection. Model 4S for 17' boat size.
Tie Down Engineering Danforth Standard Anchor - 94012 - 241-94012F1
Have endured over 50 years giving reliable performance. Has the traditional good holding power which has always been associated with Danforth Standard anchors. The shank is made of high strength steel. The steel flukes are strong and wide. Each anchor has a hot dipped galvanized coating for long lasting protection. Model 8S for 27' boat size.
Tie Down Engineering Danforth Standard Anchor - 94013 - 241-94013F1
Have endured over 50 years giving reliable performance. Has the traditional good holding power which has always been associated with Danforth Standard anchors. The shank is made of high strength steel. The steel flukes are strong and wide. Each anchor has a hot dipped galvanized coating for long lasting protection. Model 13S for 31' boat size.
Tie Down Engineering Danforth Standard Anchor - 94014 - 241-94014F1
Have endured over 50 years giving reliable performance. Has the traditional good holding power which has always been associated with Danforth Standard anchors. The shank is made of high strength steel. The steel flukes are strong and wide. Each anchor has a hot dipped galvanized coating for long lasting protection. Model 18S for 36' boat size.
Tie Down Engineering Danforth Standard Anchor - 94015 - 241-94015F1
Have endured over 50 years giving reliable performance. Has the traditional good holding power which has always been associated with Danforth Standard anchors. The shank is made of high strength steel. The steel flukes are strong and wide. Each anchor has a hot dipped galvanized coating for long lasting protection. Model 22S for 40' boat size.
Tie Down Engineering Danforth Standard Anchor - 94016 - 241-94016F1
Have endured over 50 years giving reliable performance. Has the traditional good holding power which has always been associated with Danforth Standard anchors. The shank is made of high strength steel. The steel flukes are strong and wide. Each anchor has a hot dipped galvanized coating for long lasting protection. Model 40S for 45' boat size.
Tie Down Engineering Deluxe Anchor Kit Includes Anchor, Anchor Line, Chain And Shackles - 95096 - 241-95096F1
This anchor has the traditional holding power which has always been associated with Danforth® Standard® Anchors. The shank is made of high strength steel. The steel flukes are strong and wide. Each anchor has a hot dipped galvanized coating for long-lasting protection. Includes Danforth anchor, rope, stainless steel chain and shackles. Model S600 with 8 lb. Danforth® anchor for 17'-24' boats.
Tie Down Engineering Dock Hardware - 14" Internal Pile Holder, Commercial Grade - 26434 - 241-26434F1
Commercial grade. Heavy duty 1/4" galvanized steel. Bolts to the dock directly. 4 Rollers allow it to move smoothly up and down the piling. Size: 24" x 24" x 7-15/16".
Tie Down Engineering Dock Hardware - 5" X 5" Back Up Plate, Commercial Grade - 26413 - 241-26413F1
Reinforcing plates are used to back up single T males and females. 5" x 5".
Tie Down Engineering Dock Hardware - Angle Brackets/Clip - 26379 - 241-26379F1
Commercial grade. Should be used for all cross supports. Each leg 10"L x 3"H", 3 holes.
Tie Down Engineering Dock Hardware - Angle Brackets/Clip - 26380 - 241-26380F1
Commercial grade. Should be used for all cross supports. Each leg 4"L x 7"H".
Tie Down Engineering Dock Hardware - Angle Brackets/Clip - 26392 - 241-26392F1
Commerical grade. Should be used for all cross supports. Each leg 2-3/4"L x 2-1/2"H.
Tie Down Engineering Dock Hardware - Angle Brackets/Clip - 26397 - 241-26397F1
Commercial Grade. Should be used for all cross supports. Each leg 4"L x 8"H.
Tie Down Engineering Dock Hardware - Angle Brackets/Clip - 26398 - 241-26398F1
Commercial grade. Should be used for all cross supports. Each leg 3"L x 5"H.
Tie Down Engineering Dock Hardware - Angle Brackets/Clip - 26399 - 241-26399F1
Commercial grade. Should be used for all cross supports. Each leg 2-1/2"L x 2-1/2"H".
Tie Down Engineering Dock Hardware - Angle Brackets/Clip - 26406 - 241-26406F1
Commercial grade. Should be used for all cross supports. Each leg 2-1/2"L x 5"H.
Tie Down Engineering Dock Hardware - Angle Brackets/Clip - 26422 - 241-26422F1
Commercial grade. Should be used for all cross supports. Each leg 2-3/4"L x 5"H.
Tie Down Engineering Dock Hardware - Angle Brackets/Clip - 26527 - 241-26527F1
Standard grade. Should be used for all cross supports. Each leg 2-1/2"L x 5"H.
Tie Down Engineering Dock Hardware - Backing Plate/Hurricane Strap, Standard Grade - 26369 - 241-26369F1
Standard grade for use with Piling Hoops. Size: 2" x 18" x 7 ga.
Tie Down Engineering Dock Hardware - Chain Retainer, Commercial Grade - 26410 - 241-26410F1
Commercial grade. Bolts to side of dock. Use weights and chain to hold dock in place. Accommodates 1/4", 3/8" and 1/2" chain. 5"L x 5"H.
Tie Down Engineering Dock Hardware - Galvanized Hex Head Bolt Set 3/4" X 3-1/2" (8 Per Bag) - 24279 - 241-24279F1
Standard grade. Includes lock nut. Used to connect male and female connectors. Galvanized 3/4" x 3-1/2".
Tie Down Engineering Dock Hardware - Galvanized Inside Rolling Ramp Bracket Includes Left And Right Ramp Brackets, Commercial Grade - 26431 - 241-26431F1
5" x 11" x 1/4" galvanized steel bracketIncludes left and right ramp brackets
Tie Down Engineering Dock Hardware - Heavy Duty 4" X 6" Deck Plate, Commercial Grade - 26416 - 241-26416F1
Heavy duty deck plate for use with Piling Hoop. This 3/16" thick 4"x 6" x 22" plate can be bolted from the top and side of the dock. The hoop can then be bolted to the deck plate, allowing it to be removed seasonally.
Tie Down Engineering Dock Hardware - Heavy Duty Hot Dipped Galvanized 6" Roller Assembly, Commercial Grade - 26414 - 241-26414F1
Commercial heavy duty roller assembly. Bracket and roller bolt directly to the deck plate (26416). An aid to the up and down motion of the dock in areas of tidal action. 6" roller turns on a 5/8" diameter shaft. 3/4" bracket is hot-dipped galvanized. Size: 10-1/2" x 2".
Tie Down Engineering Dock Hardware - Hot Dipped Galvanized Carriage Bolt Set (8 Per Bag) - 26534 - 241-26534F1
Used to attach component parts. 3/8 x 2-1/2" bolt, flat washer and nut. Hot dipped galvanized. Commercial grade 1/2" x 3".
Tie Down Engineering Dock Hardware - Hot Dipped Galvanized Carriage Bolt Set (8 Per Bag) - 26535 - 241-26535F1
Used to attach component parts. 3/8 x 2-1/2" bolt, flat washer and nut. Hot dipped galvanized. Commercial grade 1/2" x 3".
Tie Down Engineering Dock Hardware - Hot Dipped Galvanized Heavy Duty Piling Hoop, Commercial Grade - 26412 - 241-26412F1
Commerical grade. Heavy duty piling hoop for pilings up to 12" in diameter. The hoop is constructed of 1-1/2" pipe and is hot dip galvanized. It can be bolted directly to the side of the dock or to the optional deck plate.
Tie Down Engineering Dock Hardware - Hot Dipped Galvanized Lag Bolt Set (8 Per Bag) - 24287 - 241-24287F1
Standard grade bolt and flat washer hot dip galvanized used to attach flotation drums to dock system. Size: 3/8" x 2".
Tie Down Engineering Dock Hardware - Hot Dipped Galvanized Lag Bolt Set (8 Per Bag) - 24289 - 241-24289F1
Standard grade bolt and flat washer hot dip galvanized used to attach flotation drums to dock system. Size: 3/8" x 3".
Tie Down Engineering Dock Hardware - Hot Dipped Galvanized Lag Bolt Set (8 Per Bag) - 24292 - 241-24292F1
Commercial grade bolt and flat washer hot dip galvanized used to attach flotation drums to dock system. Size: 3/8" x 5".
Tie Down Engineering Dock Hardware - Inside Corner 10-1/2"L X 5"H With 2-1/4" Elongated Holes And Larger Brace, Commercial Grade - 26424 - 241-26424F1
Commercial grade. Should be used with one of the outside corners. Each leg has elongated holes for easy fit. 10-1/2"L x 5"H w/ 2-1/4" holes & larger brace.
Tie Down Engineering Dock Hardware - Inside Corner 8-1/4"L X 5"H - 26401 - 241-26401F1
Commercial grade. Should be used with one of the outside corners. Each leg has elongated holes for easy fit. 8-1/4"L x 5"H w/ Square holes.
Tie Down Engineering Dock Hardware - Inside Corner 8-1/4"L X 5"H - 26403 - 241-26403F1
Commercial grade. Should be used with one of the outside corners. Each leg has elongated holes for easy fit. 8-1/4"L x 5"H w/ 2-1/4" holes.
Tie Down Engineering Dock Hardware - Inside Corner 8-1/4"L X 5"H - 26417 - 241-26417F1
Commercial grade. Should be used with one of the outside corners. Each leg has elongated holes for easy fit. 8-1/4"L x 5"H w/ 3" holes.
Tie Down Engineering Dock Hardware - Inside Corner 8-1/4"L X 5"H - 26524 - 241-26524F1
Standard grade. Should be used with one of the outside corners. Each leg has elongated holes for easy fit. 8-1/4"L x 5"H w/ 2" holes.
Tie Down Engineering Dock Hardware - Inside Corner Pipe Holder, Commercial Grade - 26404 - 241-26404F1
Commercial grade. Should be used with one of the outside corners and has an internal pipe holder. 8-1/4"L x 5"H. Requires carriage bolt set for attaching. 2" Pipe.
Tie Down Engineering Dock Hardware - Inside Corner Pipe Holder, Commercial Grade - 26405 - 241-26405F1
Commercial grade. Should be used with one of the outside corners and has an internal pipe holder. 8-1/4"L x 5"H. Requires carriage bolt set for attaching. 2" Pipe.
Tie Down Engineering Dock Hardware - Outside Corner End - 26402 - 241-26402F1
Commercial grade. Use this corner at ends of fingers and docks. Ideal for swim floats and ski jump corners. Each leg is 10"L x 5"H.
Tie Down Engineering Dock Hardware - Outside Corner End - 26428 - 241-26428F1
Commercial grade. Use this corner at ends of fingers and docks. Ideal for swim floats and ski jump corners. Each leg is 12-1/4"L x 5"H.
Tie Down Engineering Dock Hardware - Outside Corner End - 26523 - 241-26523F1
Standard grade. Use this corner at ends of fingers and docks. Ideal for swim floats and ski jump corners. Each leg is 10"L x 5"H.
Tie Down Engineering Dock Hardware - Outside Corner/Female 10"L X 5"H - 26400 - 241-26400F1
Commercial grade. Two 1/2" welded tabs. Use with a male outside corner. Each leg is 10"L x 5"H.
Tie Down Engineering Dock Hardware - Outside Corner/Female 10"L X 5"H - 26521 - 241-26521F1
Standard grade. Two 1/2" welded tabs. Use with a male outside corner. Each leg is 10"L x 5"H.
Tie Down Engineering Dock Hardware - Outside Corner/Male 10"L X 5"H - 25491 - 241-25491F1
Standard grade. Use with a female outside corner to connect docks end to end. Joint requires 3/4" bolt set or connector pin. Each leg is 10"L x 5" H. 1/2" Welded Tab.
Tie Down Engineering Dock Hardware - Outside Corner/Male 10"L X 5"H - 26418 - 241-26418F1
Standard grade. Use with a female outside corner to connect docks end to end. Joint requires 3/4" bolt set or connector pin. Each leg is 10"L x 5" H. 1/2" Welded Tab.
Tie Down Engineering Dock Hardware - Outside Corner/Male 10"L X 5"H - 26522 - 241-26522F1
Standard grade. Use with a female outside corner to connect docks end to end. Joint requires 3/4" bolt set or connector pin. Each leg is 10"L x 5" H. 1/2" Welded Tab.
Tie Down Engineering Dock Hardware - Outside Pipe Holder - 24280 - 241-24280F1
Standard grade. Bolts to outside of dock. Uses 2" pipe to hold dock in place. Carriage bolt set required for attaching.
Tie Down Engineering Dock Hardware - Outside Pipe Holder - 26411 - 241-26411F1
Commercial grade. Bolts to outside of dock. Uses 2" pipe to hold dock in place. Carriage bolt set required for attaching.
Tie Down Engineering Dock Hardware - Piling Hoop And Roller Assembly, Commercial Grade - 26415 - 241-26415F1
Piling hoop & roller intended for areas with a lot of wind, current or tidal action. Combines the Piling hoop (26412) and roller assembly (26414) to make up for the up and down movement. For pilings up to 12" in diameter.
Tie Down Engineering Dock Hardware - Washer Plate - 24284 - 241-24284F1
Standard grade. Should be used with every Angle. Two required for each Angle. 1-1/2"L x 5"H.
Tie Down Engineering Dock Hardware - Washer Plate - 26409 - 241-26409F1
Commercial grade. Should be used with every Angle. Two required for each Angle. 1-1/2"L x 5"H.
Tie Down Engineering Dock Side Cross Beam Extension - 86916 - 241-86916F1
With the addition of the Cross Beam 28 Extension, the cross beam used in the Clamp Receiver with Cross Beam or the Slotted Receiver with Cross Beam can be lengthened for use on docks that are six feet wide.
Tie Down Engineering Dock Side Cross Beam Extension - 86934 - 241-86934F1
With the addition of the Cross Beam 28 Extension, the cross beam used in the Clamp Receiver with Cross Beam or the Slotted Receiver with Cross Beam can be lengthened for use on docks that are six feet wide.
Tie Down Engineering Dock Side Mounting Base - Magma Grill Kettle - 86913 - 241-86913F1
This mounting bracket provides secure mounting support for Magma's Kettle grills. Requires 1 receiver.
Tie Down Engineering Dock Side Slotted Receiver With Cross Beam - 86901 - 241-86901F1
The Slotted Style Receiver with the cross beam mounting bracket provides a secure mounting solution for solid side rail docks.The assembly mounts on the side rails of solid rail style docks and is secured to the side rails with two bolts on each side. Includes one slotted receiver with cross beam.
Tie Down Engineering Fluted Zinc Plated Shackle Bolts With Nuts For Use With Spring Hanger Brackets (2 Per Pack) - 86250 - 241-86250F1
For use with spring hanger brackets. Fluting prevents the bolt from turning, which can wear hanger brackets. Grade 5 steel. 9/16" x 3" bolts with nuts.
Tie Down Engineering Galvanized Dock Ladder - 28273 - 241-28273F1
Steps are galvanized for extra protection. Protects against rust and corrosion in salt water.
Tie Down Engineering Galvanized Dock Ladder - 28274 - 241-28274F1
Steps are galvanized for extra protection. Protects against rust and corrosion in salt water.
Tie Down Engineering Galvanized Dock Ladder - 28275 - 241-28275F1
Steps are galvanized for extra protection. Protects against rust and corrosion in salt water.
Tie Down Engineering Galvanized Roller Shaft W/Pal Nuts - 86184 - 241-86184F1
Packaged roller shaft/pal nut combinations make for easier consumer purchases. Roller shafts come with roller shaft and 2 pal nuts.
Tie Down Engineering Galvanized Roller Shaft W/Pal Nuts - 86185 - 241-86185F1
Packaged roller shaft/pal nut combinations make for easier consumer purchases. Roller shafts come with roller shaft and 2 pal nuts.
Tie Down Engineering Galvanized Roller Shaft W/Pal Nuts - 86186 - 241-86186F1
Packaged roller shaft/pal nut combinations make for easier consumer purchases. Roller shafts come with roller shaft and 2 pal nuts.
Tie Down Engineering Galvanized Roller Shaft W/Pal Nuts - 86187 - 241-86187F1
Packaged roller shaft/pal nut combinations make for easier consumer purchases. Roller shafts come with roller shaft and 2 pal nuts.
Tie Down Engineering Galvanized Roller Shaft W/Pal Nuts - 86188 - 241-86188F1
Packaged roller shaft/pal nut combinations make for easier consumer purchases. Roller shafts come with roller shaft and 2 pal nuts.
Tie Down Engineering Galvanized Roller Shaft W/Pal Nuts - 86189 - 241-86189F1
Packaged roller shaft/pal nut combinations make for easier consumer purchases. Roller shafts come with roller shaft and 2 pal nuts.
Tie Down Engineering Galvanized U-Bolt Kit - 86220 - 241-86220F1
Used for mounting brackets and component to trailer frame. Includes galvanized U-bolts, flat washers, lock washers and nuts.
Tie Down Engineering Galvanized U-Bolt Kit - 86221 - 241-86221F1
Used for mounting brackets and component to trailer frame. Includes galvanized U-bolts, flat washers, lock washers and nuts.
Tie Down Engineering Galvanized U-Bolt Kit - 86222 - 241-86222F1
Used for mounting brackets and component to trailer frame. Includes galvanized U-bolts, flat washers, lock washers and nuts.
Tie Down Engineering Galvanized U-Bolt Kit - 86223 - 241-86223F1
Used for mounting brackets and component to trailer frame. Includes galvanized U-bolts, flat washers, lock washers and nuts.
Tie Down Engineering Galvanized U-Bolt Kit - 86224 - 241-86224F1
Used for mounting brackets and component to trailer frame. Includes galvanized U-bolts, flat washers, lock washers and nuts.
Tie Down Engineering Galvanized U-Bolt Kit - 86225 - 241-86225F1
Used for mounting brackets and component to trailer frame. Includes galvanized U-bolts, flat washers, lock washers and nuts.
Tie Down Engineering Galvanized U-Bolt Kit - 86226 - 241-86226F1
Used for mounting brackets and component to trailer frame. Includes galvanized U-bolts, flat washers, lock washers and nuts.
Tie Down Engineering Galvanized U-Bolt Kit - 86227 - 241-86227F1
Used for mounting brackets and component to trailer frame. Includes galvanized U-bolts, flat washers, lock washers and nuts.
Tie Down Engineering Pal Nuts - 4 Per Pack - 86305 - 241-86305F1
Zinc plated steel. Size: 1/2".
Tie Down Engineering Pal Nuts - 4 Per Pack - 86310 - 241-86310F1
Zinc plated steel. Size: 5/8".
Tie Down Engineering Quik-Set Hooker Anchor - 95006 - 241-95006F1
Ideal for non-critical applications. Economy features a slip ring design that permits easy retrieval in snag filled bottoms. Hot dipped galvanized finish. Model 5HQ with 120 lbs. holding strenth.
Tie Down Engineering Quik-Set Hooker Anchor - 95011 - 241-95011F1
Ideal for non-critical applications. Economy features a slip ring design that permits easy retrieval in snag filled bottoms. Hot dipped galvanized finish.Model 7HQ with 150 Ibs. holding strength.
Tie Down Engineering Quik-Set Hooker Anchor - 95016 - 241-95016F1
Ideal for non-critical applications. Economy features a slip ring design that permits easy retrieval in snag filled bottoms. Hot dipped galvanized finish. Model 10HQ with 160 Ibs. holding strength.
