Select Category
Plumbing & Bilge
Perko Molded Polymer Thru-Hull For Hose, 1/2", Black - 0328004Blk - 9-0328004Blkf1
Not approved for use below the water line. Molded PolymerBroad Flange
Perko Molded Polymer Thru-Hull For Hose, 1-1/2", Black - 0328008Blk - 9-0328008Blkf1
Not approved for use below the water line. Molded PolymerBroad Flange
Perko Deck Fill For 1-1/2" Hose, Water - 1270Dpwchr - 9-1270Dpwchrf1
Chrome plated zinc body, black slotted plastic cap. Deck plate key (#1248-8DP), O-ring and integral retainer on cap included. Cap has a slot between the holes. Use #8 fasteners.
Perko Deck Fill For 1-1/2" Hose, Gas - 1270Dpgchr - 9-1270Dpgchrf1
Chrome plated zinc body, black slotted plastic cap. Deck plate key (#1248-8DP), O-ring and integral retainer on cap included. Cap has a slot between the holes. Use #8 fasteners.
Perko Chrome Cockpit Scupper, 1" - 0142001Chr - 9-0142001Chrf1
Cast bronze. Rubber check ball. Complete with key. Outlet angle 45°. Screw size is #8. Use spare key 124878DP.
Perko Chrome Cockpit Scupper, 1-1/2" - 0142002Chr - 9-0142002Chrf1
Cast bronze. Rubber check ball. Complete with key. Outlet angle 45°. Screw size is #8. Use spare key 124878DP.
Perko 66002Plb 5" X 3-1/4" Scoop Strainer, For 3/4" & 1" T-Hulls, Bulk - 0066002Plb - 9-66002Plbf1
Cast bronze. Screw size is #8. UL Listed. NOT TO BE USED IN POTABLE WATER SYSTEMS
Perko 0500011Plb 500 Series Intake Water Strainer, 3" Pipe Size - 0500011Plb - 9-0500011Plbf1
Cast Bronze. Designed for easy installation and cleaning. Features include mounting lugs cast into both sides to assure universal mounting, four outside tie rods and a 316 stainless steel strainer basket to minimize electrolysis. Screen hole diameter of .079 inches and a 47% open area. Drain plug in the bottom casting. Clear polycarbonate cylinder.
Perko 0322Dp8Plb 1-1/2" Bronze Thru Hull W/Nut - 0322Dp8Plb - 9-0322Dp8Plbf1
Cast bronze. Flange is machined to fit hull and grooved to retain bedding compound. Neck is threaded to approximately 3/8" from flange. Includes flange nut. UL Listed. NOT TO BE USED IN POTABLE WATER SYSTEMS.
Perko 0322Dp7Plb 1-1/4" Bronze Thru Hull W/Nut - 0322Dp7Plb - 9-0322Dp7Plbf1
Cast bronze. Flange is machined to fit hull and grooved to retain bedding compound. Neck is threaded to approximately 3/8" from flange. Includes flange nut. UL Listed. NOT TO BE USED IN POTABLE WATER SYSTEMS.
Perko 0322Dp6Plb 1" Bronze Thru Hull W/Nut - 0322Dp6Plb - 9-0322Dp6Plbf1
Cast bronze. Flange is machined to fit hull and grooved to retain bedding compound. Neck is threaded to approximately 3/8" from flange. Includes flange nut. UL Listed. NOT TO BE USED IN POTABLE WATER SYSTEMS.
Perko 0322Dp5Plb 3/4" Bronze Thru Hull W/Nut - 0322Dp5Plb - 9-0322Dp5Plbf1
Cast bronze. Flange is machined to fit hull and grooved to retain bedding compound. Neck is threaded to approximately 3/8" from flange. Includes flange nut. UL Listed. NOT TO BE USED IN POTABLE WATER SYSTEMS.
Perko 0322Dp4Plb 1/2" Bronze Thru Hull W/Nut - 0322Dp4Plb - 9-0322Dp4Plbf1
Cast bronze. Flange is machined to fit hull and grooved to retain bedding compound. Neck is threaded to approximately 3/8" from flange. Includes flange nut. UL Listed. NOT TO BE USED IN POTABLE WATER SYSTEMS.
Perko 0322010Plb 2-1/2" Bronze Thru Hull W/Nut - 0322010Plb - 9-0322010Plbf1
Cast bronze. Flange is machined to fit hull and grooved to retain bedding compound. Neck is threaded to approximately 3/8" from flange. Includes flange nut. UL Listed. NOT TO BE USED IN POTABLE WATER SYSTEMS.
Perko 0322009Plb 2" Bronze Thru Hull W/Nut - 0322009Plb - 9-0322009Plbf1
Cast bronze. Flange is machined to fit hull and grooved to retain bedding compound. Neck is threaded to approximately 3/8" from flange. Includes flange nut. UL Listed. NOT TO BE USED IN POTABLE WATER SYSTEMS.
Perko 0066Dp4Plb 8" X 5-1/8" Scoop Strainer, For 2" T-Hulls - 0066Dp4Plb - 9-0066Dp4Plbf1
Cast bronze. Screw size is #8. UL Listed. NOT TO BE USED IN POTABLE WATER SYSTEMS
Perko 0066Dp3Plb 6-1/4" X 4-1/2" Scoop Strainer, For 1-1/4" & 1-1/2" T-Hulls - 0066Dp3Plb - 9-0066Dp3Plbf1
Cast bronze. Screw size is #8. UL Listed. NOT TO BE USED IN POTABLE WATER SYSTEMS
Perko 0066Dp2Plb 5" X 3-1/4" Scoop Strainer, For 3/4" & 1" T-Hulls - 0066Dp2Plb - 9-0066Dp2Plbf1
Cast bronze. Screw size is #8. UL Listed. NOT TO BE USED IN POTABLE WATER SYSTEMS
Perko 0066Dp1Plb 3-1/2" X 2-1/2" Scoop Strainer For 3/8" & 1/2" T-Hulls, Carded - 0066Dp1Plb - 9-0066Dp1Plbf1
Cast bronze. Screw size is #8. UL Listed. NOT TO BE USED IN POTABLE WATER SYSTEMS
Paulin 51983041 Turnbuckle - Stainless Steel Hook & Eye, 9" - 5198-304 - 828-51983041F1
18-8 stainless steel with aluminum body. Bulk.
Paulin 51981201 Stainless Steel Eye Bolt, 3/8-16, 0.331" Dia. X 6" L - 5198-120 - 828-51981201F1
18.8 Stainless steel w/nuts. Bulk.
Paulin 51981191 Stainless Steel Eye Bolt, 3/8-16, 0.331" Dia. X 5" L - 5198-119 - 828-51981191F1
18.8 Stainless steel w/nuts. Bulk.
Paulin 51981181 Stainless Steel Eye Bolt, 3/8-16, 0.331" Dia. X 4" L - 5198-118 - 828-51981181F1
18.8 Stainless steel w/nuts. Bulk.
Paulin 51981141 Stainless Steel Eye Bolt, 5/16-18, 0.272" Dia. X 5" L - 5198-114 - 828-51981141F1
18.8 Stainless steel w/nuts. Bulk.
Paulin 51981131 Stainless Steel Eye Bolt, 5/16-18, 0.272" Dia. X 4" L - 5198-113 - 828-51981131F1
18.8 Stainless steel w/nuts. Bulk.
Paulin 51981121 Stainless Steel Eye Bolt, 5/16-18, 0.272" Dia. X 3.25" L - 5198-112 - 828-51981121F1
18.8 Stainless steel w/nuts. Bulk.
Paulin 51981081 Stainless Steel Eye Bolt, 1/4-20, 0.213" Dia. X 4" L - 5198-108 - 828-51981081F1
18.8 Stainless steel w/nuts. Bulk.
Paulin 51981071 Stainless Steel Eye Bolt, 1/4-20, 0.213" Dia. X 3" L - 5198-107 - 828-51981071F1
18.8 Stainless steel w/nuts. Bulk.
Paulin 51981061 Stainless Steel Eye Bolt, 1/4-20, 0.213" Dia. X 2.5" L - 5198-106 - 828-51981061F1
18.8 Stainless steel w/nuts. Bulk.
Paulin 51981051 Stainless Steel Eye Bolt, 1/4-20, 0.213" Dia. X 2" L - 5198-105 - 828-51981051F1
18.8 Stainless steel w/nuts. Bulk.
Paulin 51981021 Stainless Steel Eye Bolt, 3/16", 0.157" Dia. X 2" L - 5198-102 - 828-51981021F1
18.8 Stainless steel w/nuts. Bulk.
Paulin 51981011 Stainless Steel Eye Bolt, 3/16", 0.157" Dia. X 1.5" L - 5198-101 - 828-51981011F1
18.8 Stainless steel w/nuts. Bulk.
Paulin 51980751 Stainless Steel Screw Eye, 0.299" Dia. X 4.5" - 5198-075 - 828-51980751F1
18.8 Stainless steel. Bulk.
Paulin 51980731 Stainless Steel Screw Eye, 0.248" Dia. X 4" - 5198-073 - 828-51980731F1
18.8 Stainless steel. Bulk.
Paulin 51980721 Stainless Steel Screw Eye, 0.191" Dia. X 5" - 5198-072 - 828-51980721F1
18.8 Stainless steel. Bulk.
Paulin 51980711 Stainless Steel Screw Eye, 0.191" Dia. X 3.75" - 5198-071 - 828-51980711F1
18.8 Stainless steel. Bulk.
Paulin 51980581 Stainless Steel Screw Eye, 0.299" Dia. X 3" - 5198-058 - 828-51980581F1
18.8 Stainless steel. Bulk.
Paulin 51980571 Stainless Steel Screw Eye, 0.283" Dia. X 2.5" - 5198-057 - 828-51980571F1
18.8 Stainless steel. Bulk.
Paulin 51980551 Stainless Steel Screw Eye, 0.236" Dia. X 2" - 5198-055 - 828-51980551F1
18.8 Stainless steel. Bulk.
Paulin 51980531 Stainless Steel Screw Eye, 0.157" Dia. X 1.5" - 5198-053 - 828-51980531F1
18.8 Stainless steel. Bulk.
Paulin 51980391 S-Hooks - Stainless Steel, 3" L X 0.299" Dia. - 5198-039 - 828-51980391F1
18.8 Stainless steel. Bulk.
Paulin 51980371 S-Hooks - Stainless Steel, 2" L X 0.236" Dia. - 5198-037 - 828-51980371F1
18.8 Stainless steel. Bulk.
Paulin 51980361 S-Hooks - Stainless Steel, 1.5" L X 0.169" Dia. - 5198-036 - 828-51980361F1
18.8 Stainless steel. Bulk.
Parkpower 50A Go Anywhere™ Adapter Kit - 50Goa - 679-50Goaf1
Go Anywhere kits contain the adapters necessary to connect a 50A detachable power inlet on an RV to 15A, 30A and 50A receptacles. One kit is all you need to Go Anywhere!
Parkpower 503030Ya "Y" Adapter, 50A Male To (2) 30A Female - 503030Ya - 679-503030Yaf1
50A Male To (2) 30A Female provides two female RV receptacles from a 50A RV power source. Heavy-duty STW cable for outdoor use with molded ends with handles on female end and male ends.
Parkpower 30A Go Anywhere™ Adapter Kit - 30Goa - 679-30Goaf1
Go Anywhere kits contain the adapters necessary to connect a 30A detachable power inlet on an RV to 15A, 30A and 50A receptacles. One kit is all you need to Go Anywhere!
Parkpower 30153Gpa 30A Generator Plug To (3) 15A Receptacles Pigtail Adapter - 30153Gpa - 679-30153Gpaf1
30A Male To (3) 15A Female provides three 15A receptacles from a 30A generator receptacle. The clear, illuminated end provides visual feedback that power is present. Heavy-duty STW cable for outdoor use with molded ends with clear 15A end with LED indication on female end.
Park Power Weekender 3050Pab 30A-50A Pigtail Adapter, Bulk - 3050Pa-B - 679-3050Pabf1
Connect between an inlet and a power cord to resolve power incompatibility issues. Extra wide grip handles, LED indicator lights and outdoor use hard-service cable for quality and durability. The included locking ring creates a watertight seal between the adapter and the inlet. Connects 30A inlets to a 30A RV power sourceHeavy-duty 10/3 STW cable for outdoor useMolded ends for watertight connection between the cord and the electrical contactsPower indicator light shows that power is flowing through the adapterLocking ring creates a watertight seal between the adapter and the inletHandle on 30A male end for easy connection and removal from power pedestal or power cord
Park Power Weekender 3050Pa 30A-50A Pigtail Adapter - 3050Pa - 679-3050Paf1
Connect between an inlet and a power cord to resolve power incompatibility issues. Extra wide grip handles, LED indicator lights and outdoor use hard-service cable for quality and durability. The included locking ring creates a watertight seal between the adapter and the inlet. Connects 30A inlets to a 30A RV power sourceHeavy-duty 10/3 STW cable for outdoor useMolded ends for watertight connection between the cord and the electrical contactsPower indicator light shows that power is flowing through the adapterLocking ring creates a watertight seal between the adapter and the inletHandle on 30A male end for easy connection and removal from power pedestal or power cord
Park Power Weekender 3030Pab 30A-30A Pigtail Adapter, Bulk - 3030Pa-B - 679-3030Pabf1
Connect between an inlet and a power cord to resolve power incompatibility issues. Extra wide grip handles, LED indicator lights and outdoor use hard-service cable for quality and durability. The included locking ring creates a watertight seal between the adapter and the inlet. Connects 30A inlets to a 30A RV power sourceHeavy-duty 10/3 STW cable for outdoor useMolded ends for watertight connection between the cord and the electrical contactsPower indicator light shows that power is flowing through the adapterLocking ring creates a watertight seal between the adapter and the inletHandle on 30A male end for easy connection and removal from power pedestal or power cord
Park Power Weekender 3030Pa 30A-30A Pigtail Adapter - 3030Pa - 679-3030Paf1
Connect between an inlet and a power cord to resolve power incompatibility issues. Extra wide grip handles, LED indicator lights and outdoor use hard-service cable for quality and durability. The included locking ring creates a watertight seal between the adapter and the inlet. Connects 30A inlets to a 30A RV power sourceHeavy-duty 10/3 STW cable for outdoor useMolded ends for watertight connection between the cord and the electrical contactsPower indicator light shows that power is flowing through the adapterLocking ring creates a watertight seal between the adapter and the inletHandle on 30A male end for easy connection and removal from power pedestal or power cord
Park Power Weekender 1550Pab 15A-50A Pigtail Adapter, Bulk - 1550Pa-B - 679-1550Pabf1
Connect between an inlet and a power cord to resolve power incompatibility issues. Extra wide grip handles, LED indicator lights and outdoor use hard-service cable for quality and durability. The included locking ring creates a watertight seal between the adapter and the inlet. Connects 30A inlets to a 30A RV power sourceHeavy-duty 10/3 STW cable for outdoor useMolded ends for watertight connection between the cord and the electrical contactsPower indicator light shows that power is flowing through the adapterLocking ring creates a watertight seal between the adapter and the inlet
Park Power Weekender 1550Pa 15A-50A Pigtail Adapter - 1550Pa - 679-1550Paf1
Connect between an inlet and a power cord to resolve power incompatibility issues. Extra wide grip handles, LED indicator lights and outdoor use hard-service cable for quality and durability. The included locking ring creates a watertight seal between the adapter and the inlet. Connects 30A inlets to a 30A RV power sourceHeavy-duty 10/3 STW cable for outdoor useMolded ends for watertight connection between the cord and the electrical contactsPower indicator light shows that power is flowing through the adapterLocking ring creates a watertight seal between the adapter and the inlet
Par 24V Blower Flangemount 4 - 35400-0010 - 6-354000010F1
Offers safe, efficient and have high volume evacuation of hazardous vapors on vessels equipped with gasoline powered engines. Satisfy requirements of USCG regulation Title 46, Chapter I, part 183, subpart K for marine ventilation when properly installed and used. BIA type accepted. Also exhausts warm air from galleys and engine rooms, ventilating steam or odors from heads and general marine air circulation. Constructed of tough reinforced plastic housing and one-piece balanced rotor for maximum corrosion resistance. Flangemount blowers are generally mounted with discharge port fastened directly to flat external surface minimizing required ducting. Inlet port can be connected with duct hose to area requiring ventilation.
Par 12V Blower Flangemount - 34739-0010 - 6-347390010F1
Offers safe, efficient and have high volume evacuation of hazardous vapors on vessels equipped with gasoline powered engines. Satisfy requirements of USCG regulation Title 46, Chapter I, part 183, subpart K for marine ventilation when properly installed and used. BIA type accepted. Also exhausts warm air from galleys and engine rooms, ventilating steam or odors from heads and general marine air circulation. Constructed of tough reinforced plastic housing and one-piece balanced rotor for maximum corrosion resistance. Flangemount blowers are generally mounted with discharge port fastened directly to flat external surface minimizing required ducting. Inlet port can be connected with duct hose to area requiring ventilation.
Par 12V 3 Blower Flexmount - 36740-0000 - 6-367400000F1
Offers safe, efficient and have high volume evacuation of hazardous vapors on vessels equipped with gasoline powered engines. Satisfy requirements of USCG regulation Title 46, Chapter I, part 183, subpart K for marine ventilation when properly installed and used. BIA type accepted. Also exhausts warm air from galleys and engine rooms, ventilating steam or odors from heads and general marine air circulation. Constructed of tough reinforced plastic housing and one-piece balanced rotor for maximum corrosion resistance. Flexmount blowers have both inlet and outlet ports designed for slip-on flexible duct connections and are ideal when an in-line installation of blower is preferred. May be rotated in bracket to permit installation with discharge port in any direction.
Panther T5 Electro Steer For Kicker Motor (4" Between Motors) - 550503 - 781-550503F1
The T5 provides a unique solution to steer a kicker motor up to 40 hp. It can be installed on any kicker motor with a threaded tilt tube without drilling any holes in the boat. Installs in minutes and requires only 4" between the main engine and the kicker. Controlled by an included 2 button hand held remote with a 24' cable. Mounting hardware included. Optional wireless remote available separately. 12V, 7.5 amps.
Panther Stainless Steel High Security Outboard Motor Lock - 758101 - 781-758101F1
This high security lock is designed for bolt on engines. It is made from polished 300 series marine grade stainless steel, features anti drill protection and includes 2 keys which cannot be duplicated without the 4 digit key code provided. Fits up to 1/2" engine bolts.
Panther Replacement Hose For Pro Series Extractors - 756099 - 781-756099F1
Panther Model 100 Electro Steer For Kicker Motor - 550101A - 781-550101Af1
The Panther 100 Electro Steer is easy to install anywhere in the transom area and is operated with a 24' cable w/handheld remote for convenient operation. Steers from full right to left in only 4 seconds with fast, precise control. Includes connecting rod w/quick disconnects.
Panther Electro Steer And Auxiliary Motor Steering Adapter Kit - 555705 - 781-555705F1
Used specifically to adapt our steering kits to your main engine hydraulic steering. A cleverly designed "L" shaped bracket makes steering your kicker motor from your console an everyday event. The kit includes "L" bracket, washers, mounting bolt, loctite, and instructions.
Panther Auxiliary Motor Steering Kit For Use With Trolling Motors Up To 25 Hp - 552600 - 781-552600F1
Auxiliary motor steering kit provides remote control steering for any type or size of outboard trolling motor up to 25 horse-power. Constructed of stainless steel.
Panther Auxiliary Motor Steering Kit For Use With Trolling Motors Up To 25 Hp - 552400 - 781-552400F1
Auxiliary motor steering kit provides remote control steering for any type or size of outboard trolling motor up to 25 horse-power. Constructed of zinc plated steel.
Panther 9955531A Replacement Motor - 99-55531-T4 - 757-9955531Af1
Replacement Motor
Panther 9952600 Quick Disconnect End Assembly - Stainless Steel - 99-52600 - 757-9952600F1
Quick disconnect end for steering rod in saltwater applications.
Panther 9952400 Quick Disconnect End Assembly - Zinc Plated - 99-52400 - 757-9952400F1
Quick disconnect end for steering rod in fresh or saltwater applications.
Panther 9905029 Ball Stud Assembly - Stainless Steel - 99-05029 - 757-9905029F1
Ball stud for steering rod in fresh or saltwater applications.
Panther 85B203Mar Happy Hooker Mooring Aid - 85-B203Mar - 757-85B203Marf1
Makes picking up moorings a snap. This unique product allows the user to easily pass a rope, mooring line, dock line or cable through an eye hook, ring, bow eye or mooring buoy eye and retrieve, all in one simple motion. Easily fastens to most any type of extension pole with a bolt or hose clamp. (Pole not included.)
Panther 550103 T4 Electro Steer For Kicker Motor (9" Between Motors) - 550103 - 781-550103F1
The T4 Electro-Steer features a unique solution to fit every kicker motor with a tilt tube. It installs in minutes thru the tilt tube and doesn't take any room away from your transom. Requires 9" between the main engine and kicker motor. Includes a 24' cable w/handheld remote for convenient use, connecting rod w/quick disconnects, and all mounting hardware. Optional wireless remote w/50' range available.
Paint Strainer - Cone Type - 92601 - 50-92601F1
Medium nylon meshDisposableSold by the box
Packing Box Hose 2" - 80Ho200 - 379-80Ho200F1
Heavy duty, sold each.
Packing Box Hose 2-1/4" - 80Ho225 - 379-80Ho225F1
Heavy duty, sold each.
Packing Box Hose 2-1/2" - 80Ho250 - 379-80Ho250F1
Heavy duty, sold each.
Packing Box Hose 1-3/4" - 80Ho175 - 379-80Ho175F1
Heavy duty, sold each.
Packing Box Hose 1-1/2" - 80Ho150 - 379-80Ho150F1
Heavy duty, sold each.
P Bracket 3/4 (18001 Strainer - 14240 - 762-14240F1
Provides a sturdy mounting harness for Sherwood line strainers. Unique design enables easy trouble free assembly. Does not effect quick cleaning ability of strainer bowl.
P Bracket 1 (Strainer=18005) - 14239 - 762-14239F1
Provides a sturdy mounting harness for Sherwood line strainers. Unique design enables easy trouble free assembly. Does not effect quick cleaning ability of strainer bowl.
Outboard Hose 3' W/Dbl Bend 2/Bx - Kitobdbr-03' - 216-Kitobdbr03F1
Two hoses with swaged fittings featuring bend restrictors are suitable for use with Uflex cylinders and helms. OBDBR hoses have bend restrictors on both ends. Compatible with Seastar Solutions helms and cylinders. These are rated to 1500 PSI working pressure, but not recommended for racing applications. Specify length when ordering. 2 hoses per kit.
Orbilge Quart - Ob2 - 198-Ob2F1
Highly concentrated heavy duty cleaner, that dissolves oil and grime leaving a fresh pine odor. Biodegradable and environmentally safe.
Orbilge Gallon - Ob8 - 198-Ob8F1
Highly concentrated heavy duty cleaner, that dissolves oil and grime leaving a fresh pine odor. Biodegradable and environmentally safe.
Optronics A57Ccs 7-Round To 5-Flat Adapter - A57Ccs - 158-A57Ccsf1
Coil cord, clam shell package.
Ongaro Wiper Motor Switch - 40400 - 120-40400F1
Heavy duty 3 position wiper rocker switch. 2 speeds. Works with Ongaro and other competitive wiper motors.
Ongaro Wiper Control System - 32010 - 120-32010F1
Wiper control system with switch for 1-3 motors. Fits Ongaro motors. With three motors connected, it runs helm seat motor or all motors. Synchronized sweep: interval, slow and fast speed; rocker switch included. Washing system.
Ongaro Windshield Washer Kit, 12V - 31130 - 120-31130F1
Polypropylene tank with pump, tubing, thru-deck nozzles and bracket. 3 Quart capacity.
Ongaro Standard Wiper Motor, 12V, 3/8" X 2-1/2" Shaft - 31001 - 120-31001F1
Non-waterproof, powder coated aluminum cover. 304 Stainless steel mounting plate, shaft and mounting hardware. 80° or 110° adjustable sweep angle. Will power up to 14" arm and 14" blade combination. 3-Year limited warranty.
Ongaro Standard Wiper Kit Kit W/14" Blade, 12V, 3/8" X 2-1/2" Shaft - 31014 - 120-31014F1
Black powder coated aluminum cover with 304 Stainless steel mounting plate, shaft and mounting hardware. 80° or 110° adjustable sweep angle. Will power up to 14" arm and 14" blade combination. 3-Year limited warranty. Kit includes: Standard 12 Volt Motor (31001), 14" (33014) wiper blade and 11"-14" adjustable wiper arm (33680).
Ongaro Standard Wiper Kit Kit W/11" Blade, 12V, 3/8" X 2-1/2" Shaft - 31011 - 120-31011F1
Black powder coated aluminum cover with 304 Stainless steel mounting plate, shaft and mounting hardware. 80° or 110° adjustable sweep angle. Will power up to 14" arm and 14" blade combination. 3-Year limited warranty. Kit includes: Standard 12 Volt Motor (31001), 11" (33011) wiper blade and 11"-14" adjustable wiper arm (33680).
Ongaro Standard Wiper Arm, 11" - 14" - 33680 - 120-33680F1
Wiper arm for use with standard wiper motors (33001 & 31001). 3/8" Shaft.
Ongaro Standard Waterproof Wiper Motor, 12V, 3/8" X 2-1/2" Shaft - 33001 - 120-33001F1
Powder coated aluminum cover with 304 Stainless steel mounting plate, shaft and mounting hardware. 80° or 110° adjustable sweep angle. Will power up to 14" arm and 14" blade combination. 3-Year limited warranty.
Ongaro Standard Waterproof Wiper Kit W/14" Blade, 12V, 3/8" X 2-1/2" Shaft - 33003 - 120-33003F1
White powder coated aluminum cover with 304 Stainless Steel mounting plate, shaft and mounting hardware. 80° or 110° adjustable sweep angle. Will power up to 14" arm and 14" blade combination. 3-Year limited warranty. Kit includes: Standard 12 Volt Motor (33001), 14" (33014) wiper blade and 11"-14" adjustable wiper arm (33680).
Ongaro Standard Waterproof Wiper Kit W/11" Blade, 12V, 3/8" X 2-1/2" Shaft - 33002 - 120-33002F1
White powder coated aluminum cover with 304 Stainless Steel mounting plate, shaft and mounting hardware. 80° or 110° adjustable sweep angle. Will power up to 14" arm and 14" blade combination. 3-Year limited warranty. Kit includes: Standard 12 Volt Motor (33001), 11" (33011) wiper blade and 11"-14" adjustable wiper arm (33680).
Ongaro Standard Mini Single Compact Horn, 12V - 10035 - 120-10035F1
304 stainless steel cover, diaphragm and mounting bracket. 1-Year warranty.
Ongaro Standard Mini Double Compact Horn, 12V - 10001 - 120-10001F1
304 stainless steel cover, diaphragm and mounting bracket. 1-Year warranty.
Ongaro Shorty Deluxe Single Trumpet Horn, 12V - 10009 - 120-10009F1
Waterproof with drain Hole. Stainless steel inside and out. 5-Year warranty.
Ongaro Shorty Deluxe Dual Trumpet Horn, 12V - 10012 - 120-10012F1
Waterproof with drain Hole. Stainless steel inside and out. 5-Year warranty.
Ongaro Mini Hidden Compact Horn, 12V - 11032 - 120-11032F1
All stainless inside and out. 5-Year warranty.
Ongaro Mini Drop-In Single Horn - 10050 - 120-10050F1
All stainless inside and out. 5-Year warranty.
Ongaro Mini Drop-In Dual Horns - 10055 - 120-10055F1
Set of 2 Mini Drop-In Horns, 1 high pitch and 1 low pitch. All stainless inside and out. 5-Year warranty.
Ongaro Heavy Duty Wiper Motor, 24V, 5/8" X 2-1/2" - 30992 - 120-30992F1
Black powder coated housing, 304 stainless steel hardware and shaft with chrome plated brass shaft housing. Adjustable sweep angle of 40' to 100' in 10' increments with adjustable park position to right or left. 2 Speeds, will power up to a 24" arm and 24" blade combination. 3-Year limited warranty.
