Select Category
Plumbing & Bilge
Forespar Marelon 3/4" Vented Loop/Siphon Valve - 903001 - 108-903001F1
Vented loops are vital components to any onboard plumbing system reducing the risk of sinking or flooding. The glass reinforced composite Marelon™ Vented Loops allow air to enter the lines preventing that dangerous back siphoning effect. Use above the waterline on your head discharge system, bilge pump, the engine, gen-sets, air conditioners, ballast tanks or other equipment. Vented loops help make sure your boat stays afloat after the pumps are turned off.
Forespar Marelon 1/2" Vented Loop/Siphon Valve - 903008 - 108-903008F1
Vented loops are vital components to any onboard plumbing system reducing the risk of sinking or flooding. The glass reinforced composite Marelon™ Vented Loops allow air to enter the lines preventing that dangerous back siphoning effect. Use above the waterline on your head discharge system, bilge pump, the engine, gen-sets, air conditioners, ballast tanks or other equipment. Vented loops help make sure your boat stays afloat after the pumps are turned off.
Forespar Marelon 1-1/2" Vented Loop/Siphon Valve - 903000 - 108-903000F1
Vented loops are vital components to any onboard plumbing system reducing the risk of sinking or flooding. The glass reinforced composite Marelon™ Vented Loops allow air to enter the lines preventing that dangerous back siphoning effect. Use above the waterline on your head discharge system, bilge pump, the engine, gen-sets, air conditioners, ballast tanks or other equipment. Vented loops help make sure your boat stays afloat after the pumps are turned off.
Forespar Cf251 Marelon Full Threaded Mushroom Head Thru Hull W/Nut, White - 906020 - 108-906020F1
Made from high strength glass-reinforced Marelon. Ideal for use above or below the waterline. Must be installed with proper bedding compound. Recommend a maximum torque setting of 20 lb/ft.
Forespar Cf251 Marelon Full Threaded Mushroom Head Thru Hull W/Nut, White - 906018 - 108-906018F1
Made from high strength glass-reinforced Marelon. Ideal for use above or below the waterline. Must be installed with proper bedding compound. Recommend a maximum torque setting of 20 lb/ft.
Forespar Cf251 Marelon Full Threaded Mushroom Head Thru Hull W/Nut, White - 906016 - 108-906016F1
Made from high strength glass-reinforced Marelon. Ideal for use above or below the waterline. Must be installed with proper bedding compound. Recommend a maximum torque setting of 20 lb/ft.
Forespar Cf251 Marelon Full Threaded Mushroom Head Thru Hull W/Nut, White - 906014 - 108-906014F1
Made from high strength glass-reinforced Marelon. Ideal for use above or below the waterline. Must be installed with proper bedding compound. Recommend a maximum torque setting of 20 lb/ft.
Forespar Cf251 Marelon Full Threaded Mushroom Head Thru Hull W/Nut, White - 906012 - 108-906012F1
Made from high strength glass-reinforced Marelon. Ideal for use above or below the waterline. Must be installed with proper bedding compound. Recommend a maximum torque setting of 20 lb/ft.
Forespar Cf251 Marelon Full Threaded Mushroom Head Thru Hull W/Nut, White - 906010 - 108-906010F1
Made from high strength glass-reinforced Marelon. Ideal for use above or below the waterline. Must be installed with proper bedding compound. Recommend a maximum torque setting of 20 lb/ft.
Forespar Cf250S Marelon Full Threaded, Screened, Flush Head Thru Hull W/Nut, White - 906009 - 108-906009F1
Made from high strength glass-reinforced Marelon. Ideal for use above or below the waterline. Must be installed with proper bedding compound. Recommend a maximum torque setting of 20 lb/ft. 250S Model is fitted with a screen.
Forespar Cf250S Marelon Full Threaded, Screened, Flush Head Thru Hull W/Nut, White - 906003 - 108-906003F1
Made from high strength glass-reinforced Marelon. Ideal for use above or below the waterline. Must be installed with proper bedding compound. Recommend a maximum torque setting of 20 lb/ft. 250S Model is fitted with a screen.
Forespar Cf250 Marelon Full Threaded Flush Head Thru Hull W/Nut, White - 906008 - 108-906008F1
Made from high strength glass-reinforced Marelon. Ideal for use above or below the waterline. Must be installed with proper bedding compound. Recommend a maximum torque setting of 20 lb/ft.
Forespar Cf250 Marelon Full Threaded Flush Head Thru Hull W/Nut, White - 906006 - 108-906006F1
Made from high strength glass-reinforced Marelon. Ideal for use above or below the waterline. Must be installed with proper bedding compound. Recommend a maximum torque setting of 20 lb/ft.
Forespar Cf250 Marelon Full Threaded Flush Head Thru Hull W/Nut, White - 906004 - 108-906004F1
Made from high strength glass-reinforced Marelon. Ideal for use above or below the waterline. Must be installed with proper bedding compound. Recommend a maximum torque setting of 20 lb/ft.
Forespar Cf250 Marelon Full Threaded Flush Head Thru Hull W/Nut, White - 906002 - 108-906002F1
Made from high strength glass-reinforced Marelon. Ideal for use above or below the waterline. Must be installed with proper bedding compound. Recommend a maximum torque setting of 20 lb/ft.
Forespar Cf250 Marelon Full Threaded Flush Head Thru Hull W/Nut, White - 906000 - 108-906000F1
Made from high strength glass-reinforced Marelon. Ideal for use above or below the waterline. Must be installed with proper bedding compound. Recommend a maximum torque setting of 20 lb/ft.
Forespar 905014 Female Threaded Barbed Fitting - 905014 - 108-905014F1
Manufactured from high impact resistant, glass reinforced Marelon®. All threads are NPSM.
Forespar 905013 Female Threaded Barbed Fitting - 905013 - 108-905013F1
Manufactured from high impact resistant, glass reinforced Marelon®. All threads are NPSM.
Forespar 905012 Female Threaded Barbed Fitting - 905012 - 108-905012F1
Manufactured from high impact resistant, glass reinforced Marelon®. All threads are NPSM.
Forespar 902018 Marelon Y-Valve, 1-1/8" Barbs - 902018 - 108-902018F1
Essential piece of equipment when the flow of water or other fluids are required to be diverted. Mounted to a bulkhead. Operated by a 120° movement.
Forespar 902017 Marelon Y-Valve, 3/4" Barbs - 902017 - 108-902017F1
Essential piece of equipment when the flow of water or other fluids are required to be diverted. Mounted to a bulkhead. Operated by a 120° movement.
Forespar 902001 Marelon Y-Valve, 1" Barbs - 902001 - 108-902001F1
Essential piece of equipment when the flow of water or other fluids are required to be diverted. Mounted to a bulkhead. Operated by a 120° movement.
Forespar 902000 Marelon Y-Valve, 1-1/2" Barbs - 902000 - 108-902000F1
Essential piece of equipment when the flow of water or other fluids are required to be diverted. Mounted to a bulkhead. Operated by a 120° movement.
Forespar 901014 Female Threaded Barbed Fitting - 901014 - 108-901014F1
Manufactured from high impact resistant, glass reinforced Marelon®. All threads are NPSM.
Forespar 901005 Marelon Male Elbow - 901005 - 108-901005F1
Made from high-strength glass-reinforced Marelon. Dimension 'A' indicates pipe thread size. All elbows sold in U.S.A. have straight pipe threads.
Force 10 56258 Force 10 Marine Barbecue Grill - For56258 - 924-For56258F1
The Force 10 BBQ is an appliance for the outdoors. Designed for the marine market all features are designed with performance and usability in mind. The heavy gauge stainless steel will withstand the elements of salt and heat, while the sculpted lid allows rope lines to easily pass over. The integrated heat disbursement / grease tray is designed to minimize wind blow out and can easily be removed for cleaning. With 225 sq inches of even cooking surface this BBQ has space to cook for a crew of 4-6. The electronic spark ignition allows for fast and easy ignition, and the integrated foldaway legs offer an option for those going on land.
Flushmaster Smfmbag1 Storage Bag Fits Flushmaster And Hoses - Sm-Fmbag1 - 983-Smfmbag1F1
The FLUSHMASTER is a revolutionary, marine-grade, portable device designed to simplify the process of flushing your outboard motors. Accessory Part
Flushmaster Smfm4020 Flushmaster 4-Port With (2) 20 Ft Hose Kit - Sm-Fm4020 - 983-Smfm4020F1
The Flushmaster 2-Outlet Flushing System with 5-foot hoses is designed for close proximity setups. This portable, marine-grade device automates the sequential flushing of up to two outboard engines, ensuring thorough internal cleaning. Powered by three AA batteries, it features a pre-programmed 15-minute flush per outlet and automatically shuts off upon completion. The system includes one Flushmaster 2-Outlet unit, two 5-foot EPDM hose kits, batteries, a screwdriver, and an instruction manual. Its compact design (8" x 8" x 4"), marine-grade materials, and IP67 waterproof rating make it suitable for various marine environments. IP67 WaterproofBattery OperatedPortableMarine-Grade MaterialsVersatile UseSaves Time and WaterEnsure Proper Maintenance30-Day Guarantee
Flushmaster Smfm4012 Flushmaster 4-Port With (2) 12 Ft Hose Kit - Sm-Fm4012 - 983-Smfm4012F1
The Flushmaster 2-Outlet Flushing System with 5-foot hoses is designed for close proximity setups. This portable, marine-grade device automates the sequential flushing of up to two outboard engines, ensuring thorough internal cleaning. Powered by three AA batteries, it features a pre-programmed 15-minute flush per outlet and automatically shuts off upon completion. The system includes one Flushmaster 2-Outlet unit, two 5-foot EPDM hose kits, batteries, a screwdriver, and an instruction manual. Its compact design (8" x 8" x 4"), marine-grade materials, and IP67 waterproof rating make it suitable for various marine environments. IP67 WaterproofBattery OperatedPortableMarine-Grade MaterialsVersatile UseSaves Time and WaterEnsure Proper Maintenance30-Day Guarantee
Flushmaster Smfm2012 Flushmaster 2-Port With (2) 12 Ft Hose Kit - Sm-Fm2012 - 983-Smfm2012F1
The Flushmaster 2-Outlet Flushing System with 5-foot hoses is designed for close proximity setups. This portable, marine-grade device automates the sequential flushing of up to two outboard engines, ensuring thorough internal cleaning. Powered by three AA batteries, it features a pre-programmed 15-minute flush per outlet and automatically shuts off upon completion. The system includes one Flushmaster 2-Outlet unit, two 5-foot EPDM hose kits, batteries, a screwdriver, and an instruction manual. Its compact design (8" x 8" x 4"), marine-grade materials, and IP67 waterproof rating make it suitable for various marine environments. Versatile UseSaves Time and WaterEnsure Proper Maintenance30-Day Guarantee
Flushing Strainer, 1-1/4",Cast Bronze Strainer Includes A Fresh Water Port And A Smooth - 0593007Plb - 9-0593007Plbf1
Cast bronze strainer includes a fresh water port and a smooth, low-torque ball valve so you can switch from straining raw water to flushing with fresh water instantly. Can be used for inboard engines or generators. The handle indicates the flow direction and it uses standard Perko strainer repair parts. Top casting removes easily for basket cleaning. Can also be used in an emergency as an engine driven bilge pump. Reversible bulkhead mounting option. Made in USA. NOT TO BE USED IN POTABLE WATER SYSTEMS.
Flush Port Reroute, Single White Acrylic, Vertical 3/8 Barb - Sm-Qcr1Wv38 - 983-Smqcr1Wv38F1
Flush Port Reroute, Single White Acrylic, Vertical 1/2 Barb - Sm-Qcr1Wv12 - 983-Smqcr1Wv12F1
Flush Port Reroute, Single Black Acrylic, Vertical 3/8 Barb - Sm-Qcr1Bv38 - 983-Smqcr1Bv38F1
Flush Port Reroute, Single Black Acrylic, Vertical 1/2 Barb - Sm-Qcr1Bv12 - 983-Smqcr1Bv12F1
Flush Port Reroute, Single 316 Ss Acrylic, Vertical 3/8 Barb - Sm-Qcr1Ssv38 - 983-Smqcr1Ssv38F1
Flush Port Reroute, Single 316 Ss Acrylic, Vertical 1/2 Barb - Sm-Qcr1Ssv12 - 983-Smqcr1Ssv12F1
Flush Port Reroute, Dual White Acrylic, Vertical 3/8 Barb - Sm-Qcr2Wv38 - 983-Smqcr2Wv38F1
Flush Port Reroute, Dual White Acrylic, Vertical 1/2 Barb - Sm-Qcr2Wv12 - 983-Smqcr2Wv12F1
Flush Port Reroute, Dual White Acrylic, Horizontal 3/8 Barb - Sm-Qcr2Wh38 - 983-Smqcr2Wh38F1
Flush Port Reroute, Dual White Acrylic, Horizontal 1/2 Barb - Sm-Qcr2Wh12 - 983-Smqcr2Wh12F1
Flush Port Reroute, Dual Black Acrylic, Vertical 3/8 Barb - Sm-Qcr2Bv38 - 983-Smqcr2Bv38F1
Flush Port Reroute, Dual Black Acrylic, Vertical 1/2 Barb - Sm-Qcr2Bv12 - 983-Smqcr2Bv12F1
Flush Port Reroute, Dual Black Acrylic, Horizontal 3/8 Barb - Sm-Qcr2Bh38 - 983-Smqcr2Bh38F1
Flush Port Reroute, Dual Black Acrylic, Horizontal 1/2 Barb - Sm-Qcr2Bh12 - 983-Smqcr2Bh12F1
Flush Port Reroute, Dual 316 Ss Acrylic, Vertical 3/8 Barb - Sm-Qcr2Ssv38 - 983-Smqcr2Ssv38F1
Flush Port Reroute, Dual 316 Ss Acrylic, Vertical 1/2 Barb - Sm-Qcr2Ssv12 - 983-Smqcr2Ssv12F1
Flush Port Reroute, Dual 316 Ss Acrylic, Horizontal 3/8 Barb - Sm-Qcr2Ssh38 - 983-Smqcr2Ssh38F1
Flush Port Reroute, Dual 316 Ss Acrylic, Horizontal 1/2 Barb - Sm-Qcr2Ssh12 - 983-Smqcr2Ssh12F1
Flow-Rite V4 - 3 Position Select Valve, Rear Cable Approach - Mpv-04-Rn01 - 81-Mpv04Rn01F1
The V4 valve allows a standard aerator pump to be mounted directly to the valve body for both filling and recirculation duties, thus eliminating the need for 2 separate pumps and additional plumbing. When in the "FILL" position, the valve will close the livewell drain side of the valve so the pump has free access to fresh outside water. Once the livewell is full, the valve is placed in the "RECIRC" position to close the drain and allow full recirculation of the livewell water. Occasionally returning to the "FILL" position will keep the livewell topped off and freshened. The "EMPTY" position allows gravity draining with the pump off. Any additional fill or recirculation pump is optional and only becomes a true back-up to the main system pump. Once the system is put into the "AUTO" position and the pump turned on, all livewell functions are handled so the angler can concentrate on fishing. Ideally used in walleye boats or other high profile boats for drain control and livewell management. Accepts mounting of one standard aerator pump for both filling and recirculation. Includes closed recirculation mode which allows addition of optional pump-out systemProvides FILL / EMPTY / RECIRC modes
Flow-Rite V4 - 3 Position Select Valve, Front Cable Approach - Mpv-04-Fn01 - 81-Mpv04Fn01F1
The V4 valve allows a standard aerator pump to be mounted directly to the valve body for both filling and recirculation duties, thus eliminating the need for 2 separate pumps and additional plumbing. When in the "FILL" position, the valve will close the livewell drain side of the valve so the pump has free access to fresh outside water. Once the livewell is full, the valve is placed in the "RECIRC" position to close the drain and allow full recirculation of the livewell water. Occasionally returning to the "FILL" position will keep the livewell topped off and freshened. The "EMPTY" position allows gravity draining with the pump off. Any additional fill or recirculation pump is optional and only becomes a true back-up to the main system pump. Once the system is put into the "AUTO" position and the pump turned on, all livewell functions are handled so the angler can concentrate on fishing. Ideally used in walleye boats or other high profile boats for drain control and livewell management. Accepts mounting of one standard aerator pump for both filling and recirculation. Includes closed recirculation mode which allows addition of optional pump-out systemProvides FILL / EMPTY / RECIRC modes
Flow-Rite V3 - 3 Position Automatic Valve, Rear Cable Approach - Mpv-03-Rn01 - 81-Mpv03Rn01F1
Like the V2, the V3 is a reversible check valve that allows a single pump to not only perform the basic livewell functions necessary to keep your catch alive, but does it in a passive or automatic manner. It also has a third closed "RECIRC" position. When the first fish is caught, place the valve in the "AUTO" position and turn on the pump. When the boat is off plane the pump will recirculate and aerate the livewell water and simultaneously blend in a portion of fresh lake water. Used livewell water is expelled out the overflow as fresh water enters to prevent any ammonia build up. When the boat is put on plane, the valve's check flapper will prevent water loss out the drain, and allow the pump to continue its recirculation duties. Any water lost out the overflow while running on plane is automatically made up when the boat is brought off plane at the next fishing location. All this is accomplished without any operator assistance. For those times when outside water is not wanted or available, such as, adding ice, livewell additives, going through locks, traveling to out of water weigh-ins, dockside refueling or using our optional Pump-out /Venturi Aerator, place the valve in the "RECIRC" position. To empty, simply turn off the pump and move the valve to the "EMPTY" position for gravity draining. Ideally used in bassboats, flats boats, and other low profile boats for Automatic drain control and livewell management. Accepts mounting of one standard aerator pump for both filling and recirculationIncludes closed recirculation mode which allows addition of optional pump-out system.Provides RECIRC / EMPTY / AUTO modes
Flow-Rite V3 - 3 Position Automatic Valve, Front Cable Approach - Mpv-03-Fn01 - 81-Mpv03Fn01F1
Like the V2, the V3 is a reversible check valve that allows a single pump to not only perform the basic livewell functions necessary to keep your catch alive, but does it in a passive or automatic manner. It also has a third closed "RECIRC" position. When the first fish is caught, place the valve in the "AUTO" position and turn on the pump. When the boat is off plane the pump will recirculate and aerate the livewell water and simultaneously blend in a portion of fresh lake water. Used livewell water is expelled out the overflow as fresh water enters to prevent any ammonia build up. When the boat is put on plane, the valve's check flapper will prevent water loss out the drain, and allow the pump to continue its recirculation duties. Any water lost out the overflow while running on plane is automatically made up when the boat is brought off plane at the next fishing location. All this is accomplished without any operator assistance. For those times when outside water is not wanted or available, such as, adding ice, livewell additives, going through locks, traveling to out of water weigh-ins, dockside refueling or using our optional Pump-out /Venturi Aerator, place the valve in the "RECIRC" position. To empty, simply turn off the pump and move the valve to the "EMPTY" position for gravity draining. Ideally used in bassboats, flats boats, and other low profile boats for Automatic drain control and livewell management. Accepts mounting of one standard aerator pump for both filling and recirculationIncludes closed recirculation mode which allows addition of optional pump-out system.Provides RECIRC / EMPTY / AUTO modes
Flow-Rite V2 - 2 Position Automatic Valve, Rear Cable Approach - Mpv-02-Rn01 - 81-Mpv02Rn01F1
The V2 is our reversible check valve that allows a single pump to not only perform the basic livewell functions necessary to keep your catch alive, but does it in a passive or automatic manner. By mounting the pump to the valve body, the operator only has to decide whether he wants his livewell functioning or empty. When the first fish is caught, place the valve in the "AUTO" position and turn on the pump. When the boat is off plane the pump will recirculate and aerate the livewell water and simultaneously blend in a portion of fresh lake water. Used livewell water is expelled out the overflow as fresh water enters to prevent any ammonia build up. When the boat is put on plane, the valve's check flapper will prevent water loss out the drain, and allow the pump to continue its recirculation duties. Any water lost out the overflow while running on plane is automatically made up when the boat is brought off plane at the next fishing location. Ideally used in bassboats, flats boats, and other low profile boats for automatic drain control and livewell management. Accepts mounting of one standard aerator pump for both filling and recirculation. Provides EMPTY / AUTO modes
Flow-Rite V1 - 2 Position Shut Off Valve W/Quick Lock Connection - Mpv-11-Fn01 - 81-Mpv11Fn01F1
The V1 valve provides remote drain control and eliminates the need for drain plugs and standpipes. Features dual seals for positive shut-off in the "CLOSED" position and a straight unrestricted flow path in the "OPEN" position. This valve is non-directional. Remote drain control for any boat's livewell, baitwell or cooler. Provides OPEN / CLOSED modes
Flow-Rite V1 - 2 Position Shut Off Valve W/Barbed Connection - Mpv-01-Fn-01 - 81-Mpv01Fn01F1
The V1 valve provides remote drain control and eliminates the need for drain plugs and standpipes. Features dual seals for positive shut-off in the "CLOSED" position and a straight unrestricted flow path in the "OPEN" position. This valve is non-directional. Remote drain control for any boat's livewell, baitwell or cooler. Provides OPEN / CLOSED modes
Flow-Rite Mpa018 Snap-In Strainer, 3/4" - Mpa-018 - 81-Mpa018F1
#316 Stainless strainer screen for fresh and saltwater use. Strainer snap-in feature provides a positive vibration proof lock, yet can easily be removed for cleaning.
Flow-Rite Mb006 Qwik-Lok™ Pump-Out Aerator Bundle 3/4" - Mb-006 - 81-Mb006F1
Convert your existing recuirclation pump into a PowerStream Pump-Out Aerator Combo with this bundle. By simply pulling the red aerator head, water is diverted from the livewell to the Included pump-out thru-hull. ^Kit Includes:Pump-out aerator, Pump-out thru-hull, 3/4" Qwik-Lok straight sockets (3), 3/4" Qwik-Lok 90° socket, Hose Clamps, 3/4" x 8' Hose.
Flow-Rite Mb005 Qwik-Lok™ Bilge Bundle, 1-1/8" W/Rule 1000 Gph Bilge Pump - Mb-005 - 81-Mb005F1
Quickly install this bundle and you'll be able to remove water from your bilge area in no time. Includes: Bilge pump, Thru-hull, 2 Quik-Lok™ straight fittings, Hose clamps and 6' hose.
Flow-Rite Mb002 Qwik-Lok™ Bilge Bundle, 3/4" - Mb-002 - 81-Mb002F1
Quickly install this bundle and you'll be able to remove water from your bilge area in no time. Includes: Thru-hull, 2 Quik-Lok™ straight fittings, Hose clamps & 6' hose.
Flow-Rite Ma293 Qwik-Lok Fitting, 1-1/2", 90° 1" Hose Barb - Ma-293 - 81-Ma293F1
From fresh water to salt water, Flow-Rite has the marine plumbing system you need. The revolutionary Qwik-Lok™ quick-connect plumbing system replaces leak-prone barb fittings. Designed and engineered to withstand the elements. Qwik-Lok provides increased productivity, quality, and value while reducing costs.The heart of the Qwik-Lok system is the innovative socket that fits industry-standard marine hose in numerous sizes, eliminating any need for additional sealant or crimping.1-1/2" Series: Commonly used for ballast systems and other applications.
Flow-Rite Ma288 Qwik-Lok Fitting, 1-1/2", Ql Tee - Ma-288 - 81-Ma288F1
From fresh water to salt water, Flow-Rite has the marine plumbing system you need. The revolutionary Qwik-Lok™ quick-connect plumbing system replaces leak-prone barb fittings. Designed and engineered to withstand the elements. Qwik-Lok provides increased productivity, quality, and value while reducing costs.The heart of the Qwik-Lok system is the innovative socket that fits industry-standard marine hose in numerous sizes, eliminating any need for additional sealant or crimping.1-1/2" Series: Commonly used for ballast systems and other applications.
Flow-Rite Ma286 Qwik-Lok Fitting, 1-1/2", Ql X 1-1/2" Unf Female - Ma-286 - 81-Ma286F1
From fresh water to salt water, Flow-Rite has the marine plumbing system you need. The revolutionary Qwik-Lok™ quick-connect plumbing system replaces leak-prone barb fittings. Designed and engineered to withstand the elements. Qwik-Lok provides increased productivity, quality, and value while reducing costs.The heart of the Qwik-Lok system is the innovative socket that fits industry-standard marine hose in numerous sizes, eliminating any need for additional sealant or crimping.1-1/2" Series: Commonly used for ballast systems and other applications.
Flow-Rite Ma285 Qwik-Lok Fitting, 1-1/2", Ql X 1-1/2" Npt Male - Ma-285 - 81-Ma285F1
From fresh water to salt water, Flow-Rite has the marine plumbing system you need. The revolutionary Qwik-Lok™ quick-connect plumbing system replaces leak-prone barb fittings. Designed and engineered to withstand the elements. Qwik-Lok provides increased productivity, quality, and value while reducing costs.The heart of the Qwik-Lok system is the innovative socket that fits industry-standard marine hose in numerous sizes, eliminating any need for additional sealant or crimping.1-1/2" Series: Commonly used for ballast systems and other applications.
Flow-Rite Ma282 Qwik-Lok Fitting, 1-1/2", Ql Bulkhead - Ma-282 - 81-Ma282F1
From fresh water to salt water, Flow-Rite has the marine plumbing system you need. The revolutionary Qwik-Lok™ quick-connect plumbing system replaces leak-prone barb fittings. Designed and engineered to withstand the elements. Qwik-Lok provides increased productivity, quality, and value while reducing costs.The heart of the Qwik-Lok system is the innovative socket that fits industry-standard marine hose in numerous sizes, eliminating any need for additional sealant or crimping.1-1/2" Series: Commonly used for ballast systems and other applications.
Flow-Rite Ma151 Qwik-Lok Fitting, 1-1/2", Ql Elbow - Ma-151 - 81-Ma151F1
From fresh water to salt water, Flow-Rite has the marine plumbing system you need. The revolutionary Qwik-Lok™ quick-connect plumbing system replaces leak-prone barb fittings. Designed and engineered to withstand the elements. Qwik-Lok provides increased productivity, quality, and value while reducing costs.The heart of the Qwik-Lok system is the innovative socket that fits industry-standard marine hose in numerous sizes, eliminating any need for additional sealant or crimping.1-1/2" Series: Commonly used for ballast systems and other applications.
Flow-Rite Ma150 Qwik-Lok Fitting, 1-1/2", Ql Straight - Ma-150 - 81-Ma150F1
From fresh water to salt water, Flow-Rite has the marine plumbing system you need. The revolutionary Qwik-Lok™ quick-connect plumbing system replaces leak-prone barb fittings. Designed and engineered to withstand the elements. Qwik-Lok provides increased productivity, quality, and value while reducing costs.The heart of the Qwik-Lok system is the innovative socket that fits industry-standard marine hose in numerous sizes, eliminating any need for additional sealant or crimping.1-1/2" Series: Commonly used for ballast systems and other applications.
Flow-Rite Ma049 Qwik-Lok Fitting, 1-1/8", Ql Socket, Elbow - Ma-049 - 81-Ma049F1
From fresh water to salt water, Flow-Rite has the marine plumbing system you need. The revolutionary Qwik-Lok™ quick-connect plumbing system replaces leak-prone barb fittings. Designed and engineered to withstand the elements. Qwik-Lok provides increased productivity, quality, and value while reducing costs.The heart of the Qwik-Lok system is the innovative socket that fits industry-standard marine hose in numerous sizes, eliminating any need for additional sealant or crimping.
Flow-Rite Ma044Qlb Qwik-Lok Thru-Hull Fitting, 1-1/8", Black, Elbow Threaded (Internal), Flanged - Ma-044-Qlb - 81-Ma044Qlbf1
From fresh water to salt water, Flow-Rite has the marine plumbing system you need. The revolutionary Qwik-Lok™ quick-connect plumbing system replaces leak-prone barb fittings. Designed and engineered to withstand the elements. Qwik-Lok provides increased productivity, quality, and value while reducing costs.The heart of the Qwik-Lok system is the innovative socket that fits industry-standard marine hose in numerous sizes, eliminating any need for additional sealant or crimping.
Flow-Rite Ma043Qlb Qwik-Lok Thru-Hull Fitting, 1-1/8", Black, Straight Threaded (Internal), Flanged - Ma-043-Qlb - 81-Ma043Qlbf1
From fresh water to salt water, Flow-Rite has the marine plumbing system you need. The revolutionary Qwik-Lok™ quick-connect plumbing system replaces leak-prone barb fittings. Designed and engineered to withstand the elements. Qwik-Lok provides increased productivity, quality, and value while reducing costs.The heart of the Qwik-Lok system is the innovative socket that fits industry-standard marine hose in numerous sizes, eliminating any need for additional sealant or crimping.
Flow-Rite Ma041Qlb Qwik-Lok Thru-Hull Fitting, 1-1/8", Black ,Straight Flanged - Ma-041-Qlb - 81-Ma041Qlbf1
From fresh water to salt water, Flow-Rite has the marine plumbing system you need. The revolutionary Qwik-Lok™ quick-connect plumbing system replaces leak-prone barb fittings. Designed and engineered to withstand the elements. Qwik-Lok provides increased productivity, quality, and value while reducing costs.The heart of the Qwik-Lok system is the innovative socket that fits industry-standard marine hose in numerous sizes, eliminating any need for additional sealant or crimping.
Flow-Rite Ma027Qlb Qwik-Lok Thru-Hull Fitting, 3/4", Black, Elbow Flanged - Ma-027-Qlb - 81-Ma027Qlbf1
From fresh water to salt water, Flow-Rite has the marine plumbing system you need. The revolutionary Qwik-Lok™ quick-connect plumbing system replaces leak-prone barb fittings. Designed and engineered to withstand the elements. Qwik-Lok provides increased productivity, quality, and value while reducing costs.The heart of the Qwik-Lok system is the innovative socket that fits industry-standard marine hose in numerous sizes, eliminating any need for additional sealant or crimping.
Flow-Rite Ma025 Qwik-Lok Fitting, 3/4", Ql Socket, Elbow, Bulk - Ma-025 - 81-Ma025F1
From fresh water to salt water, Flow-Rite has the marine plumbing system you need. The revolutionary Qwik-Lok™ quick-connect plumbing system replaces leak-prone barb fittings. Designed and engineered to withstand the elements. Qwik-Lok provides increased productivity, quality, and value while reducing costs.The heart of the Qwik-Lok system is the innovative socket that fits industry-standard marine hose in numerous sizes, eliminating any need for additional sealant or crimping.
Flow-Rite Ma024Qlr Pump-Out Aerator, Quik-Lok - Ma-024-Qlr - 81-Ma024Qlrf1
A pump-out feature provides a convenient means of filling a tournament livewell weigh-in bag and also enables a livewell to be pumped out while the boat is still in the water or when moored at a dock overnight. It eliminates the need for additional diverting valves, cables, actuators, electrical connections and most of the plumbing required by other systems. Simply install the Pump-Out Aerator in place of the standard spray head used with any recirculation pump or with any of our V3 or V4 control valves that include a "RECIRC" mode. It has two hose connections, one intake from the pump and one outlet for the discharge hose that will connect to the new discharge thruhull fitting. The 2 position head is pushed in to bring water into the livewell where it is recirculated and aerated by the air intake and venturi built into the head. The head can also be rotated left or right to promote a desirable circular current within the livewell.
Flow-Rite Ma014 Qwik-Lok Fitting, 3/4", Ql Socket, Straight, Bulk - Ma-014 - 81-Ma014F1
From fresh water to salt water, Flow-Rite has the marine plumbing system you need. The revolutionary Qwik-Lok™ quick-connect plumbing system replaces leak-prone barb fittings. Designed and engineered to withstand the elements. Qwik-Lok provides increased productivity, quality, and value while reducing costs.The heart of the Qwik-Lok system is the innovative socket that fits industry-standard marine hose in numerous sizes, eliminating any need for additional sealant or crimping.
Flow-Rite Ma011Qlb Qwik-Lok Thru-Hull Fitting, 3/4", Black, Straight Flanged - Ma-011-Qlb - 81-Ma011Qlbf1
From fresh water to salt water, Flow-Rite has the marine plumbing system you need. The revolutionary Qwik-Lok™ quick-connect plumbing system replaces leak-prone barb fittings. Designed and engineered to withstand the elements. Qwik-Lok provides increased productivity, quality, and value while reducing costs.The heart of the Qwik-Lok system is the innovative socket that fits industry-standard marine hose in numerous sizes, eliminating any need for additional sealant or crimping.
Flow-Rite Ma007Qlb Qwik-Lok Thru-Hull Fitting, 3/4", Black, Elbow Double Nut - Ma-007-Qlb - 81-Ma007Qlbf1
From fresh water to salt water, Flow-Rite has the marine plumbing system you need. The revolutionary Qwik-Lok™ quick-connect plumbing system replaces leak-prone barb fittings. Designed and engineered to withstand the elements. Qwik-Lok provides increased productivity, quality, and value while reducing costs.The heart of the Qwik-Lok system is the innovative socket that fits industry-standard marine hose in numerous sizes, eliminating any need for additional sealant or crimping.
Flow Max Ball Scupper - Fms10Dp - 232-Fms10Dpf1
Positive sealing ball scupper. Seal slotted to fit over 1-1/4" motorwell hole.
Flojet 01740014 90 Degree Strainer - 01740-014 - 272-01740014F1
Fine 40 mesh stainless steel filter screen prevents breakdowns from particles in the water. Transparent housing for instant inspections. Screw off top allows quick cleaning and debris removal.
Flitz Stainless Steel & Chrome Clean, 16 Oz. - Sp01506 - 250-Sp01506F1
Water-based Formula, Non-toxic, Eco-friendly Voted "Best on Stainless" by the Wall Street Journal 2007 - Great on Chrome tooRemoves Fingerprints, Oil, Grease, Water Spots, Automotive Fluids, Brake Dust & more
Flat Mount Hold Down Clamp - 1112Dp0Chr - 9-1112Dp0Chrf1
Chrome plated bronze.
Flair-It Pexlock Tee, 3/8" - 30831 - 497-30831F1
Includes 3 clamps.
Flair-It Pexlock Tee, 1/2" - 30820 - 497-30820F1
Includes 3 clamps.
Flair-It Pexlock Swivel Elbow, 3/8" X 1/2" Fpt - 30817 - 497-30817F1
Pexlock Swivel Elbow
Flair-It Pexlock Swivel Elbow, 1/2" X 1/2" Fpt - 30816 - 497-30816F1
Pexlock Swivel Elbow
Flair-It Pexlock Swivel Elbow, 1/2" Mpt X 1/2" Fpt - 30785 - 497-30785F1
Pexlock Swivel Elbow
Flair-It Pexlock Swivel Adapter, 3/8" X 1/2" Fpt Swivel Bsp - 30874 - 497-30874F1
Swivel coupling with clamp.
Flair-It Pexlock Swivel Adapter, 1/2" X 1/2" Fpt Swivel Bsp - 30873 - 497-30873F1
Swivel coupling with clamp.
Flair-It Pexlock Stacking Manifold Tee, 1/2" Mpt To Bsp Swivel To Mpt - 30836 - 497-30836F1
Install with household pliers and remove with screwdriver. Freeze resistant. Can be used on vinyl hose. Can be used with PERT pipe.
Flair-It Pexlock Male Elbow, 1/2" X 3/8" Mpt - 30810 - 497-30810F1
Includes clamp.
Flair-It Pexlock Male Elbow, 1/2" X 1/2" Mpt - 30803 - 497-30803F1
Includes clamp.
Flair-It Pexlock Male Adapter, 1/2" Pex X 1/2" Mpt - 30842 - 497-30842F1
Pexlock Male Adapter
Flair-It Pexlock Male Adapter, 1/2" Mpt X 1/2" Mpt - 30952 - 497-30952F1
Pexlock Male Adapter
Flair-It Pexlock Female Adapter, 1/2" - 30841 - 497-30841F1
Install with household pliers and remove with screwdriver. Freeze resistant. Can be used on vinyl hose. Includes clamp.
Flair-It Pexlock Angle Valve, 1/2" Pex X 3/8" Compression - 30893 - 497-30893F1
Compression Quarter Turn Angle Stop Valve.
Flair-It Pexlock 3-Way Valve, Pex 1/2" X 1/2" X 1/2" - 30910 - 497-30910F1
Pexlock 3-Way Valve
Flair-It Pexlock 3-Way Valve, 1/2" X 1/2" Fpt Swivel X 1/2" - 30913 - 497-30913F1
Pexlock 3-Way Valve
Flair-It Pexlock 3-Way Valve, 1/2" Pex X 1/2" Mpt X 1/2" Pex - 30912 - 497-30912F1
Pexlock 3-Way Valve
Flair-It 06914 Angle Drain Valve, 1/2" X 1/2" X 1/2" - 6914 - 497-06914F1
Provides an efficient solution for draining water from PEX A, PEX B, and PERT piping systems. Easily install by hand; no special tools required. Made from high-grade materials, resisting freezing, cracking, and extreme heat
