Select Category
Plumbing & Bilge
1/4 X 1/8 Bronze Hex Bushing - 28102 - 38-28102F1
Bronze hex head. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1/4 Fp Tee Pvc Pipe Fittings - 805-002 - 38-805002F1
1/4 Bronze Pipe Tee - 44251 - 38-44251F1
Bronze and imported. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1/4 Bronze Pipe Coupling - 44411 - 38-44411F1
Bronze and imported. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1/4 Bronze Pipe Cap - 44471 - 38-44471F1
Bronze NOT TO BE USED IN POTABLE WATER SYSTEMS.
1/4 Bronze 90 Deg Street Ell - 44161 - 38-44161F1
Bronze 90°, male/female threads. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1/4 Brass Sq Head Pipe Plug - 28085 - 38-28085F1
Imported. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1/2X3/8 Bronze Reducing Coupling - 44435 - 38-44435F1
Bronze and imported. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1/2X1/4 Bronze Reducing Coupling - 44434 - 38-44434F1
Bronze and imported. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1/2" White Plastic Thru-Hull W/Broad Flange - 50-18011 - 50-18011F1
Molded plastic with broad flange. Per ABYC "Safety Standards for Small Craft". Not recommended for use below the waterline.
1/2" Stainless Steel Bow Shackle, Carded - 147012-1 - 354-1470121F1
Constructed of investment cast 316 stainless the D style shackle has straight sides with a U-shape rounded bottom. Designed for rigging applications with bidirectional loads. The U-shaped end can handle heavy loads, loads on the straight sides, however, may cause bending. We do not load rate cast shackles.
1/2" Shut-Off Full Flow Ball Valve - 77-103-10 - 37-7710310F1
Comes with mounting pads. Use where full flow is required. Bronze body. Chromium plated ball. Reinforced TFE seats & stuffing box ring. Blow out stem design. Stainless steel lever and nut. Meets WW-V-35C Type II. BRZ style type. Made in U.S.A. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1/2" Scoop Thru Hull W/Nut - 0065Dp4Plb - 9-0065Dp4Plbf1
Cast bronze. Screw size is #8. Strainer is 3" x 4", except for 65DP7PLB which is 3-1/4" x 4-1/4". Includes nut. UL Listed. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1/2" Intake Water Strainer - 0493004Plb - 9-0493004Plbf1
Cast bronze. Designed for easy installation and cleaning. Features mounting lugs cast into both sides to assure universal mounting, four outside tie rods and a 316 stainless steel strainer basket to minimize electrolysis. Hinged lugs for cast bronze cover permit easy removal and cleaning of basket. Drain plug in bottom casting is provided for easy removal of sediment and draining for winterization. Ratio given for open area to pipe size.
1/2" Hose X 3/8 Pipe Male Hose Barb - 32016 - 38-32016F1
Temperature and working pressure ranges - From -400F to +1600F at 150 PSI maximum. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1/2" Hose X 3/4 Pipe Male Hose Barb - 32018 - 38-32018F1
Temperature and working pressure ranges - From -400F to +1600F at 150 PSI maximum. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1/2" Hose X 1/4 Pipe Male Hose Barb - 32015 - 38-32015F1
Temperature and working pressure ranges - From -400F to +1600F at 150 PSI maximum. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1/2" Hose X 1/2 Pipe Male Hose Barb - 32017 - 38-32017F1
Temperature and working pressure ranges - From -400F to +1600F at 150 PSI maximum. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1/2" Bronze 45 Degree Street Elbow - 44203 - 38-44203F1
1/2" Bronze 45 Degree Street Elbow NOT TO BE USED IN POTABLE WATER SYSTEMS.
1/2" Brass Hose Splicer - 32096 - 38-32096F1
1/2" Brass Hose Splicer NOT TO BE USED IN POTABLE WATER SYSTEMS.
1/2" Ball Valve W/ Ss Lever - 70-103-10 - 37-7010310F1
Cast bronze with a stainless steel handle and stem nut. Ball is chrome plated for long lasting corrosion resistance. Reinforced TFE seats and stuffing box ring.Made in U.S.A. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1/2" 3-Way Bronze Diverter Valve - 70-603-10 - 37-7060310F1
Features a chrome plated ball, reinforced TFE seats, stuffing box ring, and adjustable packing gland. Made in U.S.A. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1/2 X 3/8 Bronze Hex Bushing - 44505 - 38-44505F1
Bronze hex head. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1/2 X 3 1/2 Brass Pipe Nipple - 40-065 - 38-40065F1
Nipple Brass 1/2 X 3 1/2 NOT TO BE USED IN POTABLE WATER SYSTEMS.
1/2 X 1/8 Bronze Hex Bushing - 44503 - 38-44503F1
Bronze hex head. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1/2 X 1/4 Bronze Hex Bushing - 44504 - 38-44504F1
Bronze hex head. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1/2 Water Strnr Cover Brz Spare Part-Cast Bronze Cover Fits 1/2 Intake Strainer - 049300499E - 9-049300499Ef1
1/2 Thru Hull Connection - 0328Dp4 - 9-0328Dp4F1
Molded white plastic with broad flange. For use with hose. Not recommended for use below waterline.
1/2 Pipe To Hose Adapter - 0076Dp4Plb - 9-0076Dp4Plbf1
Cast bronze. Meets requirements of USCG safety standards.
1/2 Fp Tee Pvc Pipe Fittings - 805-005 - 38-805005F1
1/2 Bronze Pipe Tee - 44253 - 38-44253F1
Bronze and imported. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1/2 Bronze Pipe Coupling - 44413 - 38-44413F1
Bronze and imported. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1/2 Bronze Pipe Cap - 44473 - 38-44473F1
Bronze NOT TO BE USED IN POTABLE WATER SYSTEMS.
1/2 Bronze 90 Deg Street Ell - 44163 - 38-44163F1
Bronze 90°, male/female threads. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1/2 Brass Sq Head Pipe Plug - 28087 - 38-28087F1
Imported. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1"Bronze Seacock W/Straight Tail Piece - 0835006Plb - 9-0835006Plbf1
Includes: thru-hull, hose adapter, drain plug, four pre-drilled mounting holes and bonding screw. Incorporates a plastic ball and seat assuring a tight seal and ease of operation and drain plugs for winterizing. Handles are easily removed. Overall height is measured from the top of the hose adapter to the bottom of the flange.
1" Thru-Hull With Nut - Th-100-W - 34-Th100Wf1
Should have threaded portion cut to proper length considering hull and butt block thickness. Consider thread depth when using a seacock. Sealant is recommended between hull and thru-hull flange. Includes nut.NOT TO BE USED IN POTABLE WATER SYSTEMS.
1" Strainer 304 Ss Basket - Arg-1000-S Bspp - 34-Arg1000Sbsppf1
Standard single strainers. No tie rods or leaks under pressure or vacuum. Quick and easy mounting system allowing removal of strainer without tools. #304 Stainless steel filter basket. O-ring seals at strainer cap and between strainer head and sight glass. See-thru screw-on strainer cap allows easy, no-tools maintenance. Spanner wrench holes in cover allow the use of SW-2531 wrench. Install with pipe or hose. Do not use chemical or abrasive cleaners on sight glass. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1" Shut-Off Full Flow Ball Valve - 77-105-10 - 37-7710510F1
Comes with mounting pads. Use where full flow is required. Bronze body. Chromium plated ball. Reinforced TFE seats & stuffing box ring. Blow out stem design. Stainless steel lever and nut. Meets WW-V-35C Type II. BRZ style type. Made in U.S.A. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1" Scoop Thru-Hull W/Nut - Sth-100-W - 34-Sth100Wf1
Includes locking nut. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1" Scoop Thru Hull W/Nut - 0065Dp6Plb - 9-0065Dp6Plbf1
Cast bronze. Screw size is #8. Strainer is 3" x 4", except for 65DP7PLB which is 3-1/4" x 4-1/4". Includes nut. UL Listed. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1" Intake Water Strainer - 0493006Plb - 9-0493006Plbf1
Cast bronze. Designed for easy installation and cleaning. Features mounting lugs cast into both sides to assure universal mounting, four outside tie rods and a 316 stainless steel strainer basket to minimize electrolysis. Hinged lugs for cast bronze cover permit easy removal and cleaning of basket. Drain plug in bottom casting is provided for easy removal of sediment and draining for winterization. Ratio given for open area to pipe size.
1" Bronze Seacock W/90° Tail Piece - 0834006Plb - 9-0834006Plbf1
Includes: thru-hull, hose adapter, drain plug, four pre-drilled mounting holes and bonding screw. Incorporates a plastic ball and seat assuring a tight seal and ease of operation and drain plugs for winterizing. Handles are easily removed. Overall height is measured from the top of the hose adapter to the bottom of the flange. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1" Bronze Seacock Body - 0805006Plb - 9-0805006Plbf1
Ball valve design. Cast bronze. Meets needs of applications that require long, scoop or flush type thru-hulls.
1" Bronze Intake Strainer - 00Is100 - 379-00Is100F1
Cast bronze w/nut.
1" Bronze Full Flow In-Line Ball Valve - Ibv-1000 Bspp - 34-Ibv1000Bsppf1
Patented field reversible handle allows you to select the closed position orientation (clockwise or counterclockwise) that best suits the installation. Handle has square hole to accept standard ratchet, to help reach valves in hard-to-reach locations and ease actuation of difficult to operate valves. 400 WOG rated. Stainless steel handle and hardware. Chrome plated solid brass ball (not a hollow ball). PTFE seats and seals. UL Listed for fuel or water.NOT TO BE USED IN POTABLE WATER SYSTEMS.
1" Bronze 45 Degree Street Elbow - 44205 - 38-44205F1
1" Bronze 45 Degree Street Elbow NOT TO BE USED IN POTABLE WATER SYSTEMS.
1" Ball Valve W/ Ss Lever - 70-105-10 - 37-7010510F1
Cast bronze with a stainless steel handle and stem nut. Ball is chrome plated for long lasting corrosion resistance. Reinforced TFE seats and stuffing box ring.Made in U.S.A. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1" 3-Way Bronze Diverter Valve - 70-605-10 - 37-7060510F1
Features a chrome plated ball, reinforced TFE seats, stuffing box ring, and adjustable packing gland. Made in U.S.A. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1" & 1-1/8" Inline Non-Return Valve - Lv1218 - 698-Lv1218F1
Simple way to maintain prime in a suction or discharge line. Designed to fit in-line. Use with manual or electric pumps.
1" & 1-1/2" Inline Non-Return Valve - Lv1215 - 698-Lv1215F1
Simple way to maintain prime in a suction or discharge line. Designed to fit in-line. Use with manual or electric pumps.
1-1/8" White Plastic Thru-Hull W/Broad Flange - 18090 - 50-18090F1
Molded plastic with broad flange. Per ABYC "Safety Standards for Small Craft". Not recommended for use below the waterline.
1-1/8 Thru Hull Connect Bulk - 0328Dp6A - 9-0328Dp6Af1
Molded white plastic with broad flange. For use with hose. Not recommended for use below waterline.
1-1/8 Ql Elbow Thru-Hull Blk 15/08 - Ma-042-Qlb - 81-Ma042Qlbf1
1-1/8 Chr Thru-Hull F/Hose - 035006Adpc - 9-035006Adpcf1
Available in plain or chrome plated bronze, these fittings have a hose barb connection and are recommended for use above the waterline only. The flange is machined to fit the hull tightly and grooved to retain bedding compound. Minimum hull thickness 3/8".
1-1/4X3/4 Bronze Reduce Coupling - 44445 - 38-44445F1
Bronze and imported. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1-1/4"Bronze Seacock W/Straight Tail Piece - 0835007Plb - 9-0835007Plbf1
Includes: thru-hull, hose adapter, drain plug, four pre-drilled mounting holes and bonding screw. Incorporates a plastic ball and seat assuring a tight seal and ease of operation and drain plugs for winterizing. Handles are easily removed. Overall height is measured from the top of the hose adapter to the bottom of the flange.
1-1/4" Thru-Hull With Nut - Th-125-W - 34-Th125Wf1
Should have threaded portion cut to proper length considering hull and butt block thickness. Consider thread depth when using a seacock. Sealant is recommended between hull and thru-hull flange. Includes nut.NOT TO BE USED IN POTABLE WATER SYSTEMS.
1-1/4" Strainer 304 Ss Basket - Arg-1250-S Bspp - 34-Arg1250Sbsppf1
Standard single strainers. No tie rods or leaks under pressure or vacuum. Quick and easy mounting system allowing removal of strainer without tools. #304 Stainless steel filter basket. O-ring seals at strainer cap and between strainer head and sight glass. See-thru screw-on strainer cap allows easy, no-tools maintenance. Spanner wrench holes in cover allow the use of SW-2531 wrench. Install with pipe or hose. Do not use chemical or abrasive cleaners on sight glass. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1-1/4" Shut-Off Full Flow Ball Valve - 77-106-10 - 37-7710610F1
Comes with mounting pads. Use where full flow is required. Bronze body. Chromium plated ball. Reinforced TFE seats & stuffing box ring. Blow out stem design. Stainless steel lever and nut. Meets WW-V-35C Type II. BRZ style type. Made in U.S.A. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1-1/4" Scoop Thru Hull W/Nut - 0065Dp7Plb - 9-0065Dp7Plbf1
Cast bronze. Screw size is #8. Strainer is 3" x 4", except for 65DP7PLB which is 3-1/4" x 4-1/4". Includes nut. UL Listed. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1-1/4" Intake Water Strainer - 0493007Plb - 9-0493007Plbf1
Cast bronze. Designed for easy installation and cleaning. Features mounting lugs cast into both sides to assure universal mounting, four outside tie rods and a 316 stainless steel strainer basket to minimize electrolysis. Hinged lugs for cast bronze cover permit easy removal and cleaning of basket. Drain plug in bottom casting is provided for easy removal of sediment and draining for winterization. Ratio given for open area to pipe size.
1-1/4" Bronze Seacock W/90° Tail Piece - 0834007Plb - 9-0834007Plbf1
Includes: thru-hull, hose adapter, drain plug, four pre-drilled mounting holes and bonding screw. Incorporates a plastic ball and seat assuring a tight seal and ease of operation and drain plugs for winterizing. Handles are easily removed. Overall height is measured from the top of the hose adapter to the bottom of the flange.
1-1/4" Bronze Seacock Body - 0805007Plb - 9-0805007Plbf1
Ball valve design. Cast bronze. Meets needs of applications that require long, scoop or flush type thru-hulls.
1-1/4" Bronze Intake Strainer - 00Is125 - 379-00Is125F1
Cast bronze w/nut.
1-1/4" Bronze Full Flow In-Line Ball Valve - Ibv-1250 Bspp - 34-Ibv1250Bsppf1
Patented field reversible handle allows you to select the closed position orientation (clockwise or counterclockwise) that best suits the installation. Handle has square hole to accept standard ratchet, to help reach valves in hard-to-reach locations and ease actuation of difficult to operate valves. 400 WOG rated. Stainless steel handle and hardware. Chrome plated solid brass ball (not a hollow ball). PTFE seats and seals. UL Listed for fuel or water.NOT TO BE USED IN POTABLE WATER SYSTEMS.
1-1/4" Bronze 45 Degree Street Elbow - 44206 - 38-44206F1
1-1/4" Bronze 45 Degree Street Elbow NOT TO BE USED IN POTABLE WATER SYSTEMS.
1-1/4" Ball Valve W/ Ss Lever - 70-106-10 - 37-7010610F1
Cast bronze with a stainless steel handle and stem nut. Ball is chrome plated for long lasting corrosion resistance. Reinforced TFE seats and stuffing box ring.Made in U.S.A. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1-1/4 X 5 Brass Pipe Nipple - 40127 - 38-40127F1
1-1/4 X 5 Brass Pipe Nipple NOT TO BE USED IN POTABLE WATER SYSTEMS.
1-1/4 X 3/4 Bronze Hex Bushing - 44517 - 38-44517F1
Bronze hex head. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1-1/4 X 1 Bronze Reduce Coupling - 44446 - 38-44446F1
Bronze and imported. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1-1/4 X 1 Bronze Hex Bushing - 44518 - 38-44518F1
Bronze hex head. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1-1/4 Slot Hi Spd Thru Hul Brz Bronze Thru Hull - Hsslth-1250-W - 34-Hsslth1250Wf1
1-1/4 Brz Floor Flange Brass Fittings - 44-695 - 38-44695F1
1-1/4 Bronze Pipe Tee - 44256 - 38-44256F1
Bronze and imported. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1-1/4 Bronze Pipe Coupling - 44416 - 38-44416F1
Bronze and imported. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1-1/4 Bronze Pipe Cap - 44476 - 38-44476F1
Bronze NOT TO BE USED IN POTABLE WATER SYSTEMS.
1-1/4 Bronze 90 Deg Street Ell - 44166 - 38-44166F1
Bronze 90°, male/female threads. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1-1/4 90 Deg Pipe/Hose Adapte - 0063Dp7Plb - 9-0063Dp7Plbf1
Cast bronze. Meets requirements of USCG safety standards.
1-1/2X1-1/4 Bronze Reduce Couplng - 44450 - 38-44450F1
Bronze and imported. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1-1/2" Y Valve - 45490-1000 - 6-454901000F1
Designed for installation in waste discharge and bilge pumpout systems. Allows waste to be pumped directly into holding tank or diverted to an overboard discharge fitting. Empty two separate bilge sections with a single pump. All ABS and stainless steel construction. Withstands corrosive waste chemicals and bilge water.
1-1/2" Thru-Hull With Nut - Th-150-W - 34-Th150Wf1
Should have threaded portion cut to proper length considering hull and butt block thickness. Consider thread depth when using a seacock. Sealant is recommended between hull and thru-hull flange. Includes nut.NOT TO BE USED IN POTABLE WATER SYSTEMS.
1-1/2" Shut-Off Full Flow Ball Valve - 77-107-10 - 37-7710710F1
Comes with mounting pads. Use where full flow is required. Bronze body. Chromium plated ball. Reinforced TFE seats & stuffing box ring. Blow out stem design. Stainless steel lever and nut. Meets WW-V-35C Type II. BRZ style type. Made in U.S.A. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1-1/2" Scoop Thru-Hull W/Nut - Sth-150-W - 34-Sth150Wf1
Includes locking nut. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1-1/2" Intake Water Strainer - 0493008Plb - 9-0493008Plbf1
Cast bronze. Designed for easy installation and cleaning. Features mounting lugs cast into both sides to assure universal mounting, four outside tie rods and a 316 stainless steel strainer basket to minimize electrolysis. Hinged lugs for cast bronze cover permit easy removal and cleaning of basket. Drain plug in bottom casting is provided for easy removal of sediment and draining for winterization. Ratio given for open area to pipe size.
1-1/2" Bronze Seacock W/Straight Tail Piece - 0835008Plb - 9-0835008Plbf1
Includes: thru-hull, hose adapter, drain plug, four pre-drilled mounting holes and bonding screw. Incorporates a plastic ball and seat assuring a tight seal and ease of operation and drain plugs for winterizing. Handles are easily removed. Overall height is measured from the top of the hose adapter to the bottom of the flange.
1-1/2" Bronze Seacock W/90° Tail Piece - 0834008Plb - 9-0834008Plbf1
Includes: thru-hull, hose adapter, drain plug, four pre-drilled mounting holes and bonding screw. Incorporates a plastic ball and seat assuring a tight seal and ease of operation and drain plugs for winterizing. Handles are easily removed. Overall height is measured from the top of the hose adapter to the bottom of the flange.
1-1/2" Bronze Seacock Body - 0805008Plb - 9-0805008Plbf1
Ball valve design. Cast bronze. Meets needs of applications that require long, scoop or flush type thru-hulls.
1-1/2" Bronze Intake Strainer - 00Is150 - 379-00Is150F1
Cast bronze w/nut.
1-1/2" Bronze 45 Degree St Elbow - 44207 - 38-44207F1
1-1/2" Bronze 45 Degree St Elbow NOT TO BE USED IN POTABLE WATER SYSTEMS.
1-1/2" Ball Valve W/ Ss Lever - 70-107-10 - 37-7010710F1
Cast bronze with a stainless steel handle and stem nut. Ball is chrome plated for long lasting corrosion resistance. Reinforced TFE seats and stuffing box ring.Made in U.S.A. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1-1/2" 3-Way Bronze Diverter Valve - 70-607-10 - 37-7060710F1
Features a chrome plated ball, reinforced TFE seats, stuffing box ring, and adjustable packing gland. Made in U.S.A. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1-1/2 X-Long Thru Hull-White - Th1502Xlb - 232-Th1502Xlbf1
High Quality UV and Chemical Resistant Virgin PolyproSized to Fit All Marine Hose
1-1/2 X 3/4 Bronze Hex Bushing - 44522 - 38-44522F1
Bronze hex head. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1-1/2 X 3-1/2 Brass Pipe Nipple - 40144 - 38-40144F1
1-1/2 X 3-1/2 Brass Pipe Nipple NOT TO BE USED IN POTABLE WATER SYSTEMS.
1-1/2 X 1-1/4 Bronze Hex Bushing - 44524 - 38-44524F1
Bronze hex head. NOT TO BE USED IN POTABLE WATER SYSTEMS.
