Hoses, Clamps & Fittings
Shields Marine Blue Series 202 Nautiflex Silicone Exhaust 3' Hose - 16-202-5000-36 - 88-202500036F1
For straight connections in wet exhaust systems or engine water circulation lines. Blue silicone cover with smooth finish for easy clean up. Flexible - easy to install 4 -plies of synthetic fabric. Stable at elevated temperatures. Resistant to: exhaust fumes, ozone, mild chemicals, antifreeze, salt water. Temperature range: -20°F to +350°F. Meets SAE J2006 Type R. Meets ISO 13363:2004 - Type 2 - Class B.
Shields Marine Blue Series 202 Nautiflex Silicone Exhaust 3' Hose - 16-202-4000-36 - 88-202400036F1
For straight connections in wet exhaust systems or engine water circulation lines. Blue silicone cover with smooth finish for easy clean up. Flexible - easy to install 4 -plies of synthetic fabric. Stable at elevated temperatures. Resistant to: exhaust fumes, ozone, mild chemicals, antifreeze, salt water. Temperature range: -20°F to +350°F. Meets SAE J2006 Type R. Meets ISO 13363:2004 - Type 2 - Class B.
Shields Marine Blue Series 202 Nautiflex Silicone Exhaust 3' Hose - 16-202-3000-36 - 88-202300036F1
For straight connections in wet exhaust systems or engine water circulation lines. Blue silicone cover with smooth finish for easy clean up. Flexible - easy to install 4 -plies of synthetic fabric. Stable at elevated temperatures. Resistant to: exhaust fumes, ozone, mild chemicals, antifreeze, salt water. Temperature range: -20°F to +350°F. Meets SAE J2006 Type R. Meets ISO 13363:2004 - Type 2 - Class B.
Shields Marine 90° Epdm Rubber Elbow, 6" - 16-290-6000-1 - 88-29060001F1
100% High temperature EPDM rubber. Maximum operating temperature 250°F (121°C).
Shields Marine 90° Epdm Rubber Elbow, 5" - 16-290-5000-1 - 88-29050001F1
100% High temperature EPDM rubber. Maximum operating temperature 250°F (121°C).
Shields Marine 90° Epdm Rubber Elbow, 4" - 16-290-4000-1 - 88-29040001F1
100% High temperature EPDM rubber. Maximum operating temperature 250°F (121°C).
Shields Marine 18-806-1120 Sanitation 1-1/2" Hose Tee Fitting - Fits Series 101, 105, 144 & 148 - 18-806-1120 - 88-8061120F1
Fiberglass reinforced nylon fittings designed to fit series 101, 105 and series 144 and 148 hoses without heating or special tools. For use in sanitation systems, deck drain systems and water tank fill. Chemical and fuel resistant.
Shields Marine 18-802-1120 90 Degree Male Sanitation 1-1/2" Hose Fitting - Fits Series 101, 105, 144 & 148 - 18-802-1120 - 88-8021120F1
Fiberglass reinforced nylon fittings designed to fit series 101, 105 and series 144 and 148 hoses without heating or special tools. For use in sanitation systems, deck drain systems and water tank fill. Chemical and fuel resistant.
Shields Marine 18-801-1120 Straight Female Sanitation 1-1/2" Hose Fitting - Fits Series 101, 105, 144 & 148 - 18-801-1120 - 88-8011120F1
Fiberglass reinforced nylon fittings designed to fit series 101, 105 and series 144 and 148 hoses without heating or special tools. For use in sanitation systems, deck drain systems and water tank fill. Chemical and fuel resistant.
Shields Marine 18-800-1120 Straight Male Sanitation 1-1/2" Hose Fitting - Fits Series 101, 105, 144 & 148 - 18-800-1120 - 88-8001120F1
Fiberglass reinforced nylon fittings designed to fit series 101, 105 and series 144 and 148 hoses without heating or special tools. For use in sanitation systems, deck drain systems and water tank fill. Chemical and fuel resistant.
Shields Marine 116-148-1003W Extra Heavy Duty Series 148 White Vac 10' Hose - 3" Bend - 1" Id - 16-148-1003W - 88-1481003F1
Heavy duty sanitation hose for toilet to holding tank, self-draining lines, intake, holding tank vent and pump out applications. Also good for bilge pump intake/discharge, potable water fill, livewell intake/drain, and sink, shower, or scupper drains. Resistant to odor permeation. Smooth white FDA grade PVC w/vinyl helix and rated for full vacuum. Resistant to mild chemicals, salt water, and permeation. Do not use glycol based antifreeze in hose. Not for use in pressurized water systems.
Shields Marine 116-144-1006 Pvc Sanitation Series 144 Flexible 50' Hose - 3" Bend - 1" Id - 16-144-1006 - 88-1441006F1
Ideal for toilet to holding tank and holding tank pump out applications. Superior resistance to odor permeation. Smooth off white PVC with vinyl helix. Contains anti fungus agent to control odor. Resistant to: mild chemicals, salt water, permeation. Do not use glycol based antifreeze in hose. Do not use for potable water. 5 Year limited warranty.
Shields 7208000 Marine Exhaust Hose T-Bolt 3/4" Band Clamp - 18-720-8000 - 88-7208000F1
Corrosion resistant 316 stainless steel for exhaust or intake - Any below water line application. Works with corrugated hose. Full 360° clamping surface. 3/4" band, extra long 1/4" bolt & nylon insert locknut. Torque to 75 in. lbs. maximum.For Silicone exhaust hose, use "S" series T-Bolt Clamps to accomodate the thinner wall on those hoses.
Shields 7206000S Marine Exhaust "S" Series Hose T-Bolt 3/4" Band Clamp - Fits Series 202 Silicone Exhaust Hose - 18-720-6000S - 88-7206000Sf1
Corrosion resistant 316 stainless steel for exhaust or intake - Any below water line application. Works with corrugated hose. Full 360° clamping surface. 3/4" band, extra long 1/4" bolt & nylon insert locknut. Torque to 75 in. lbs. maximum."S" series clamps are designed to fit Series 202 silicone exhaust hose which has a little smaller wall thickness and requires a slightly smaller clamp.
Shields 7206000 Marine Exhaust Hose T-Bolt 3/4" Band Clamp - 18-720-6000 - 88-7206000F1
Corrosion resistant 316 stainless steel for exhaust or intake - Any below water line application. Works with corrugated hose. Full 360° clamping surface. 3/4" band, extra long 1/4" bolt & nylon insert locknut. Torque to 75 in. lbs. maximum.For Silicone exhaust hose, use "S" series T-Bolt Clamps to accomodate the thinner wall on those hoses.
Shields 7205120 Marine Exhaust Hose T-Bolt 3/4" Band Clamp - 18-720-5120 - 88-7205120F1
Corrosion resistant 316 stainless steel for exhaust or intake - Any below water line application. Works with corrugated hose. Full 360° clamping surface. 3/4" band, extra long 1/4" bolt & nylon insert locknut. Torque to 75 in. lbs. maximum.For Silicone exhaust hose, use "S" series T-Bolt Clamps to accomodate the thinner wall on those hoses.
Shields 7205000 Marine Exhaust Hose T-Bolt 3/4" Band Clamp - 18-720-5000 - 88-7205000F1
Corrosion resistant 316 stainless steel for exhaust or intake - Any below water line application. Works with corrugated hose. Full 360° clamping surface. 3/4" band, extra long 1/4" bolt & nylon insert locknut. Torque to 75 in. lbs. maximum.For Silicone exhaust hose, use "S" series T-Bolt Clamps to accomodate the thinner wall on those hoses.
Shields 7204120 Marine Exhaust Hose T-Bolt 3/4" Band Clamp - 18-720-4120 - 88-7204120F1
Corrosion resistant 316 stainless steel for exhaust or intake - Any below water line application. Works with corrugated hose. Full 360° clamping surface. 3/4" band, extra long 1/4" bolt & nylon insert locknut. Torque to 75 in. lbs. maximum.For Silicone exhaust hose, use "S" series T-Bolt Clamps to accomodate the thinner wall on those hoses.
Shields 7204000 Marine Exhaust Hose T-Bolt 3/4" Band Clamp - 18-720-4000 - 88-7204000F1
Corrosion resistant 316 stainless steel for exhaust or intake - Any below water line application. Works with corrugated hose. Full 360° clamping surface. 3/4" band, extra long 1/4" bolt & nylon insert locknut. Torque to 75 in. lbs. maximum.For Silicone exhaust hose, use "S" series T-Bolt Clamps to accomodate the thinner wall on those hoses.
Shields 7203120 Marine Exhaust Hose T-Bolt 3/4" Band Clamp - 18-720-3120 - 88-7203120F1
Corrosion resistant 316 stainless steel for exhaust or intake - Any below water line application. Works with corrugated hose. Full 360° clamping surface. 3/4" band, extra long 1/4" bolt & nylon insert locknut. Torque to 75 in. lbs. maximum.For Silicone exhaust hose, use "S" series T-Bolt Clamps to accomodate the thinner wall on those hoses.
Shields 7203000 Marine Exhaust Hose T-Bolt 3/4" Band Clamp - 18-720-3000 - 88-7203000F1
Corrosion resistant 316 stainless steel for exhaust or intake - Any below water line application. Works with corrugated hose. Full 360° clamping surface. 3/4" band, extra long 1/4" bolt & nylon insert locknut. Torque to 75 in. lbs. maximum.For Silicone exhaust hose, use "S" series T-Bolt Clamps to accomodate the thinner wall on those hoses.
Shields 7202120 Marine Exhaust Hose T-Bolt 3/4" Band Clamp - 18-720-2120 - 88-7202120F1
Corrosion resistant 316 stainless steel for exhaust or intake - Any below water line application. Works with corrugated hose. Full 360° clamping surface. 3/4" band, extra long 1/4" bolt & nylon insert locknut. Torque to 75 in. lbs. maximum.For Silicone exhaust hose, use "S" series T-Bolt Clamps to accomodate the thinner wall on those hoses.
Shields 7202000 Marine Exhaust Hose T-Bolt 3/4" Band Clamp - 18-720-2000 - 88-7202000F1
Corrosion resistant 316 stainless steel for exhaust or intake - Any below water line application. Works with corrugated hose. Full 360° clamping surface. 3/4" band, extra long 1/4" bolt & nylon insert locknut. Torque to 75 in. lbs. maximum.For Silicone exhaust hose, use "S" series T-Bolt Clamps to accomodate the thinner wall on those hoses.
Shields 72010000 Marine Exhaust Hose T-Bolt 3/4" Band Clamp - 18-720-10000 - 88-72010000F1
Corrosion resistant 316 stainless steel for exhaust or intake - Any below water line application. Works with corrugated hose. Full 360° clamping surface. 3/4" band, extra long 1/4" bolt & nylon insert locknut. Torque to 75 in. lbs. maximum.For Silicone exhaust hose, use "S" series T-Bolt Clamps to accomodate the thinner wall on those hoses.
Shields 2548004 Exoflex Water/Exhaust Hose, 8" X 12-1/2' - 16-254-8004 - 88-2548004F1
Suitable for delivery of cooling water and exhaust gas. SAE J2006 R2 LLOYD Registered Type ApprovedTemperature Range: -22°F to 212°F, Peak 239°FBlack synthetic rubber tube cover makes it resistant to heat, salt water, ozone, and abrasionReinforced with synthetic plies, steel wire helices make it strong and kink resistantVery flexible with a 1.5" x ID radiusTighter corrugations to optimize the perfect clamp location
Shields 2548001 Exoflex Water/Exhaust Hose, 8" X 6-1/4' - 16-254-8001 - 88-2548001F1
Suitable for delivery of cooling water and exhaust gas. SAE J2006 R2 LLOYD Registered Type ApprovedTemperature Range: -22°F to 212°F, Peak 239°FBlack synthetic rubber tube cover makes it resistant to heat, salt water, ozone, and abrasionReinforced with synthetic plies, steel wire helices make it strong and kink resistantVery flexible with a 1.5" x ID radiusTighter corrugations to optimize the perfect clamp location
Shields 2546004 Exoflex Water/Exhaust Hose, 6" X 12-1/2' - 16-254-6004 - 88-2546004F1
Suitable for delivery of cooling water and exhaust gas. SAE J2006 R2 LLOYD Registered Type ApprovedTemperature Range: -22°F to 212°F, Peak 239°FBlack synthetic rubber tube cover makes it resistant to heat, salt water, ozone, and abrasionReinforced with synthetic plies, steel wire helices make it strong and kink resistantVery flexible with a 1.5" x ID radiusTighter corrugations to optimize the perfect clamp location
Shields 2545004 Exoflex Water/Exhaust Hose, 5" X 12-1/2' - 16-254-5004 - 88-2545004F1
Suitable for delivery of cooling water and exhaust gas. SAE J2006 R2 LLOYD Registered Type ApprovedTemperature Range: -22°F to 212°F, Peak 239°FBlack synthetic rubber tube cover makes it resistant to heat, salt water, ozone, and abrasionReinforced with synthetic plies, steel wire helices make it strong and kink resistantVery flexible with a 1.5" x ID radiusTighter corrugations to optimize the perfect clamp location
Shields 2545001 Exoflex Water/Exhaust Hose, 5" X 6-1/4' - 16-254-5001 - 88-2545001F1
Suitable for delivery of cooling water and exhaust gas. SAE J2006 R2 LLOYD Registered Type ApprovedTemperature Range: -22°F to 212°F, Peak 239°FBlack synthetic rubber tube cover makes it resistant to heat, salt water, ozone, and abrasionReinforced with synthetic plies, steel wire helices make it strong and kink resistantVery flexible with a 1.5" x ID radiusTighter corrugations to optimize the perfect clamp location
Shields 2544124 Exoflex Water/Exhaust Hose, 4-1/2" X 12-1/2' - 16-254-4124 - 88-2544124F1
Suitable for delivery of cooling water and exhaust gas. SAE J2006 R2 LLOYD Registered Type ApprovedTemperature Range: -22°F to 212°F, Peak 239°FBlack synthetic rubber tube cover makes it resistant to heat, salt water, ozone, and abrasionReinforced with synthetic plies, steel wire helices make it strong and kink resistantVery flexible with a 1.5" x ID radiusTighter corrugations to optimize the perfect clamp location
Shields 2544121 Exoflex Water/Exhaust Hose, 4-1/2" X 6-1/4' - 16-254-4121 - 88-2544121F1
Suitable for delivery of cooling water and exhaust gas. SAE J2006 R2 LLOYD Registered Type ApprovedTemperature Range: -22°F to 212°F, Peak 239°FBlack synthetic rubber tube cover makes it resistant to heat, salt water, ozone, and abrasionReinforced with synthetic plies, steel wire helices make it strong and kink resistantVery flexible with a 1.5" x ID radiusTighter corrugations to optimize the perfect clamp location
Shields 2544004 Exoflex Water/Exhaust Hose, 4" X 12-1/2' - 16-254-4004 - 88-2544004F1
Suitable for delivery of cooling water and exhaust gas. SAE J2006 R2 LLOYD Registered Type ApprovedTemperature Range: -22°F to 212°F, Peak 239°FBlack synthetic rubber tube cover makes it resistant to heat, salt water, ozone, and abrasionReinforced with synthetic plies, steel wire helices make it strong and kink resistantVery flexible with a 1.5" x ID radiusTighter corrugations to optimize the perfect clamp location
Shields 2544001 Exoflex Water/Exhaust Hose, 4" X 6-1/4' - 16-254-4001 - 88-2544001F1
Suitable for delivery of cooling water and exhaust gas. SAE J2006 R2 LLOYD Registered Type ApprovedTemperature Range: -22°F to 212°F, Peak 239°FBlack synthetic rubber tube cover makes it resistant to heat, salt water, ozone, and abrasionReinforced with synthetic plies, steel wire helices make it strong and kink resistantVery flexible with a 1.5" x ID radiusTighter corrugations to optimize the perfect clamp location
Shields 2543124 Exoflex Water/Exhaust Hose, 3-1/2" X 12-1/2' - 16-254-3124 - 88-2543124F1
Suitable for delivery of cooling water and exhaust gas. SAE J2006 R2 LLOYD Registered Type ApprovedTemperature Range: -22°F to 212°F, Peak 239°FBlack synthetic rubber tube cover makes it resistant to heat, salt water, ozone, and abrasionReinforced with synthetic plies, steel wire helices make it strong and kink resistantVery flexible with a 1.5" x ID radiusTighter corrugations to optimize the perfect clamp location
Shields 2543121 Exoflex Water/Exhaust Hose, 3-1/2" X 6-1/4' - 16-254-3121 - 88-2543121F1
Suitable for delivery of cooling water and exhaust gas. SAE J2006 R2 LLOYD Registered Type ApprovedTemperature Range: -22°F to 212°F, Peak 239°FBlack synthetic rubber tube cover makes it resistant to heat, salt water, ozone, and abrasionReinforced with synthetic plies, steel wire helices make it strong and kink resistantVery flexible with a 1.5" x ID radiusTighter corrugations to optimize the perfect clamp location
Shields 2543004 Exoflex Water/Exhaust Hose, 3" X 12-1/2' - 16-254-3004 - 88-2543004F1
Suitable for delivery of cooling water and exhaust gas. SAE J2006 R2 LLOYD Registered Type ApprovedTemperature Range: -22°F to 212°F, Peak 239°FBlack synthetic rubber tube cover makes it resistant to heat, salt water, ozone, and abrasionReinforced with synthetic plies, steel wire helices make it strong and kink resistantVery flexible with a 1.5" x ID radiusTighter corrugations to optimize the perfect clamp location
Shields 2543001 Exoflex Water/Exhaust Hose, 3" X 6-1/4' - 16-254-3001 - 88-2543001F1
Suitable for delivery of cooling water and exhaust gas. SAE J2006 R2 LLOYD Registered Type ApprovedTemperature Range: -22°F to 212°F, Peak 239°FBlack synthetic rubber tube cover makes it resistant to heat, salt water, ozone, and abrasionReinforced with synthetic plies, steel wire helices make it strong and kink resistantVery flexible with a 1.5" x ID radiusTighter corrugations to optimize the perfect clamp location
Shields 2543000 Exoflex Water/Exhaust Hose, 3 X 50' - 16-254-3000S - 88-2543000F1
Suitable for delivery of cooling water and exhaust gas.SAE J2006 R2 LLOYD Registered Type ApprovedTemperature Range: -22°F to 212°F, Peak 239°FBlack synthetic rubber tube cover makes it resistant to heat, salt water, ozone, and abrasionReinforced with synthetic plies, steel wire helices make it strong and kink resistantVery flexible with a 1.5" x ID" radiusTighter corrugations to optimize the perfect clamp location
Shields 2542384 Exoflex Water/Exhaust Hose, 3-3/8" X 12-1/2' - 16-254-2384 - 88-2542384F1
Suitable for delivery of cooling water and exhaust gas. SAE J2006 R2 LLOYD Registered Type ApprovedTemperature Range: -22°F to 212°F, Peak 239°FBlack synthetic rubber tube cover makes it resistant to heat, salt water, ozone, and abrasionReinforced with synthetic plies, steel wire helices make it strong and kink resistantVery flexible with a 1.5" x ID radiusTighter corrugations to optimize the perfect clamp location
Shields 2542144 Exoflex Water/Exhaust Hose, 2-1/4" X 12-1/2' - 16-254-2144 - 88-2542144F1
Suitable for delivery of cooling water and exhaust gas. SAE J2006 R2 LLOYD Registered Type ApprovedTemperature Range: -22°F to 212°F, Peak 239°FBlack synthetic rubber tube cover makes it resistant to heat, salt water, ozone, and abrasionReinforced with synthetic plies, steel wire helices make it strong and kink resistantVery flexible with a 1.5" x ID radiusTighter corrugations to optimize the perfect clamp location
Shields 2542141 Exoflex Water/Exhaust Hose, 2-1/4" X 6-1/4' - 16-254-2141 - 88-2542141F1
Suitable for delivery of cooling water and exhaust gas. SAE J2006 R2 LLOYD Registered Type ApprovedTemperature Range: -22°F to 212°F, Peak 239°FBlack synthetic rubber tube cover makes it resistant to heat, salt water, ozone, and abrasionReinforced with synthetic plies, steel wire helices make it strong and kink resistantVery flexible with a 1.5" x ID radiusTighter corrugations to optimize the perfect clamp location
Shields 2542140 Exoflex Water/Exhaust Hose, 2-1/4 X 50' - 16-254-2140S - 88-2542140F1
Suitable for delivery of cooling water and exhaust gas.SAE J2006 R2 LLOYD Registered Type ApprovedTemperature Range: -22°F to 212°F, Peak 239°FBlack synthetic rubber tube cover makes it resistant to heat, salt water, ozone, and abrasionReinforced with synthetic plies, steel wire helices make it strong and kink resistantVery flexible with a 1.5" x ID" radiusTighter corrugations to optimize the perfect clamp location
Shields 2542124 Exoflex Water/Exhaust Hose, 2-1/2" X 12-1/2' - 16-254-2124 - 88-2542124F1
Suitable for delivery of cooling water and exhaust gas. SAE J2006 R2 LLOYD Registered Type ApprovedTemperature Range: -22°F to 212°F, Peak 239°FBlack synthetic rubber tube cover makes it resistant to heat, salt water, ozone, and abrasionReinforced with synthetic plies, steel wire helices make it strong and kink resistantVery flexible with a 1.5" x ID radiusTighter corrugations to optimize the perfect clamp location
Shields 2542121 Exoflex Water/Exhaust Hose, 2-1/2" X 6-1/4' - 16-254-2121 - 88-2542121F1
Suitable for delivery of cooling water and exhaust gas. SAE J2006 R2 LLOYD Registered Type ApprovedTemperature Range: -22°F to 212°F, Peak 239°FBlack synthetic rubber tube cover makes it resistant to heat, salt water, ozone, and abrasionReinforced with synthetic plies, steel wire helices make it strong and kink resistantVery flexible with a 1.5" x ID radiusTighter corrugations to optimize the perfect clamp location
Shields 2542120 Exoflex Water/Exhaust Hose, 2-1/2 X 50' - 16-254-2120S - 88-2542120F1
Suitable for delivery of cooling water and exhaust gas.SAE J2006 R2 LLOYD Registered Type ApprovedTemperature Range: -22°F to 212°F, Peak 239°FBlack synthetic rubber tube cover makes it resistant to heat, salt water, ozone, and abrasionReinforced with synthetic plies, steel wire helices make it strong and kink resistantVery flexible with a 1.5" x ID" radiusTighter corrugations to optimize the perfect clamp location
Shields 2542004 Exoflex Water/Exhaust Hose, 2" X 12-1/2' - 16-254-2004 - 88-2542004F1
Suitable for delivery of cooling water and exhaust gas. SAE J2006 R2 LLOYD Registered Type ApprovedTemperature Range: -22°F to 212°F, Peak 239°FBlack synthetic rubber tube cover makes it resistant to heat, salt water, ozone, and abrasionReinforced with synthetic plies, steel wire helices make it strong and kink resistantVery flexible with a 1.5" x ID radiusTighter corrugations to optimize the perfect clamp location
Shields 2542000 Exoflex Water/Exhaust Hose, 2 X 50' - 16-254-2000S - 88-2542000F1
Suitable for delivery of cooling water and exhaust gas.SAE J2006 R2 LLOYD Registered Type ApprovedTemperature Range: -22°F to 212°F, Peak 239°FBlack synthetic rubber tube cover makes it resistant to heat, salt water, ozone, and abrasionReinforced with synthetic plies, steel wire helices make it strong and kink resistantVery flexible with a 1.5" x ID" radiusTighter corrugations to optimize the perfect clamp location
Shields 2541584 Exoflex Water/Exhaust Hose, 1-5/8" X 12-1/2' - 16-254-1584 - 88-2541584F1
Suitable for delivery of cooling water and exhaust gas. SAE J2006 R2 LLOYD Registered Type ApprovedTemperature Range: -22°F to 212°F, Peak 239°FBlack synthetic rubber tube cover makes it resistant to heat, salt water, ozone, and abrasionReinforced with synthetic plies, steel wire helices make it strong and kink resistantVery flexible with a 1.5" x ID radiusTighter corrugations to optimize the perfect clamp location
Shields 2541344 Exoflex Water/Exhaust Hose, 1-3/4" X 12-1/2' - 16-254-1344 - 88-2541344F1
Suitable for delivery of cooling water and exhaust gas. SAE J2006 R2 LLOYD Registered Type ApprovedTemperature Range: -22°F to 212°F, Peak 239°FBlack synthetic rubber tube cover makes it resistant to heat, salt water, ozone, and abrasionReinforced with synthetic plies, steel wire helices make it strong and kink resistantVery flexible with a 1.5" x ID radiusTighter corrugations to optimize the perfect clamp location
Shields 2541144 Exoflex Water/Exhaust Hose, 1-1/4" X 12-1/2' - 16-254-1144 - 88-2541144F1
Suitable for delivery of cooling water and exhaust gas. SAE J2006 R2 LLOYD Registered Type ApprovedTemperature Range: -22°F to 212°F, Peak 239°FBlack synthetic rubber tube cover makes it resistant to heat, salt water, ozone, and abrasionReinforced with synthetic plies, steel wire helices make it strong and kink resistantVery flexible with a 1.5" x ID radiusTighter corrugations to optimize the perfect clamp location
Shields 2541140 Exoflex Water/Exhaust Hose, 1-1/4" X 50' - 16-254-1140S - 88-2541140F1
Suitable for delivery of cooling water and exhaust gas. SAE J2006 R2 LLOYD Registered Type ApprovedTemperature Range: -22°F to 212°F, Peak 239°FBlack synthetic rubber tube cover makes it resistant to heat, salt water, ozone, and abrasionReinforced with synthetic plies, steel wire helices make it strong and kink resistantVery flexible with a 1.5" x ID radiusTighter corrugations to optimize the perfect clamp location
Shields 2541124 Exoflex Water/Exhaust Hose, 1-1/2" X 12-1/2' - 16-254-1124 - 88-2541124F1
Suitable for delivery of cooling water and exhaust gas. SAE J2006 R2 LLOYD Registered Type ApprovedTemperature Range: -22°F to 212°F, Peak 239°FBlack synthetic rubber tube cover makes it resistant to heat, salt water, ozone, and abrasionReinforced with synthetic plies, steel wire helices make it strong and kink resistantVery flexible with a 1.5" x ID radiusTighter corrugations to optimize the perfect clamp location
Shields 2541120 Exoflex Water/Exhaust Hose, 1-1/2" X 50' - 16-254-1120S - 88-2541120F1
Suitable for delivery of cooling water and exhaust gas. SAE J2006 R2 LLOYD Registered Type ApprovedTemperature Range: -22°F to 212°F, Peak 239°FBlack synthetic rubber tube cover makes it resistant to heat, salt water, ozone, and abrasionReinforced with synthetic plies, steel wire helices make it strong and kink resistantVery flexible with a 1.5" x ID radiusTighter corrugations to optimize the perfect clamp location
Shields 2541004 Exoflex Water/Exhaust Hose, 1" X 12-1/2' - 16-254-1004 - 88-2541004F1
Suitable for delivery of cooling water and exhaust gas. SAE J2006 R2 LLOYD Registered Type ApprovedTemperature Range: -22°F to 212°F, Peak 239°FBlack synthetic rubber tube cover makes it resistant to heat, salt water, ozone, and abrasionReinforced with synthetic plies, steel wire helices make it strong and kink resistantVery flexible with a 1.5" x ID radiusTighter corrugations to optimize the perfect clamp location
Shields 2541001 Exoflex Water/Exhaust Hose, 1" X 6-1/4' - 16-254-1001 - 88-2541001F1
Suitable for delivery of cooling water and exhaust gas. SAE J2006 R2 LLOYD Registered Type ApprovedTemperature Range: -22°F to 212°F, Peak 239°FBlack synthetic rubber tube cover makes it resistant to heat, salt water, ozone, and abrasionReinforced with synthetic plies, steel wire helices make it strong and kink resistantVery flexible with a 1.5" x ID radiusTighter corrugations to optimize the perfect clamp location
Shields 2540344 Exoflex Water/Exhaust Hose, 3/4" X 12-1/2' - 16-254-0344 - 88-2540344F1
Suitable for delivery of cooling water and exhaust gas. SAE J2006 R2 LLOYD Registered Type ApprovedTemperature Range: -22°F to 212°F, Peak 239°FBlack synthetic rubber tube cover makes it resistant to heat, salt water, ozone, and abrasionReinforced with synthetic plies, steel wire helices make it strong and kink resistantVery flexible with a 1.5" x ID radiusTighter corrugations to optimize the perfect clamp location
Shields 189883G Sternflex Rigging Hose & Flange Kit, 4.5' Grey - 18-9883G - 47-9883Gf1
Hides all engine cables and hoses. Can be added to any style outboard. Kit includes: Shields 2" Sternflex rigging hose & Flange.
Shields 161262000W Flexible Rigging Hose, 50' White - 16-126-2000W - 88-161262000Wf1
Hides all engine cables and hoses. Can be added to any style outboard. Polyethylene copolymer wall with integral polyethylene helix. Cover for harness, hoses on bracket mounted outboard motors. Resistant to abrasion, crushing and UV.
Shields 161262000G Flexible Rigging Hose, 50' Grey - 16-126-2000G - 88-161262000Gf1
Hides all engine cables and hoses. Can be added to any style outboard. Polyethylene copolymer wall with integral polyethylene helix. Cover for harness, hoses on bracket mounted outboard motors. Resistant to abrasion, crushing and UV.
Shields 1262003B1 Flexible Rigging Hose, 10' Black - 16-126-2003B-1 - 88-1262003B1F1
Hides all engine cables and hoses. Can be added to any style outboard. Polyethylene copolymer wall with integral polyethylene helix. Cover for harness, hoses on bracket mounted outboard motors. Resistant to abrasion, crushing and UV.
Shields 1262000B1 Flexible Rigging Hose, 50' Black - 16-126-2000Bs1 - 88-1262000B1F1
Hides all engine cables and hoses. Can be added to any style outboard. Polyethylene copolymer wall with integral polyethylene helix. Cover for harness, hoses on bracket mounted outboard motors. Resistant to abrasion, crushing and UV.
Seeker Safety Leader Stainless Steel - 5003 - 736-5003F1
Seadog Wiper Blade - 304 Stainless Steel - Black Finish - 414222B-1 - 354-414222B1F1
Deluxe curved Wiper Blade with marine grade silicone rubber squeegee. For use on flat or curved windshields with a straight blade style arm. 304 stainless steel construction.
Seadog Wiper Blade - 304 Stainless Steel - Black Finish - 414220B-1 - 354-414220B1F1
Deluxe curved Wiper Blade with marine grade silicone rubber squeegee. For use on flat or curved windshields with a straight blade style arm. 304 stainless steel construction.
Seadog Wiper Blade - 304 Stainless Steel - Black Finish - 414218B-1 - 354-414218B1F1
Deluxe curved Wiper Blade with marine grade silicone rubber squeegee. For use on flat or curved windshields with a straight blade style arm. 304 stainless steel construction.
Seadog Wiper Blade - 304 Stainless Steel - Black Finish - 414216B-1 - 354-414216B1F1
Deluxe curved Wiper Blade with marine grade silicone rubber squeegee. For use on flat or curved windshields with a straight blade style arm. 304 stainless steel construction.
Seadog Wiper Blade - 304 Stainless Steel - Black Finish - 414214B-1 - 354-414214B1F1
Deluxe curved Wiper Blade with marine grade silicone rubber squeegee. For use on flat or curved windshields with a straight blade style arm. 304 stainless steel construction.
Seadog Wiper Blade - 304 Stainless Steel - Black Finish - 414212B-1 - 354-414212B1F1
Deluxe curved Wiper Blade with marine grade silicone rubber squeegee. For use on flat or curved windshields with a straight blade style arm. 304 stainless steel construction.
Seadog Webbing Cam Cast 304 Stainless Steel Buckle & 1" X 8' Strap - 199122-1 - 354-1991221F1
Webbing cam cast 304 stainless steel buckle & 1" x 8' strap.
Seadog Webbing Cam Cast 304 Stainless Steel Buckle & 1" X 8' Strap - 199121-1 - 354-1991211F1
Webbing cam cast 304 stainless steel buckle & 1" x 8' strap.
Seadog Take-Apart Hinge | Investment Cast 316 Stainless Steel | #10 Fastener | 3-1/2" X 2" - 205275-1 - 354-2052751F1
Corrosion resistant cast 316 stainless Take-Apart Hinges allow a door or lid to be removed after installation without having to remove the fasteners. Surface mounted. Can be used horizontally or vertically. Installs with four #10 FH fasteners (not included).
Seadog Take-Apart Hinge | Investment Cast 316 Stainless Steel | #10 Fastener | 3-1/2" X 2" - 205270-1 - 354-2052701F1
Corrosion resistant cast 316 stainless Take-Apart Hinges allow a door or lid to be removed after installation without having to remove the fasteners. Surface mounted. Can be used horizontally or vertically. Installs with four #10 FH fasteners (not included).
Seadog Surface Mount Hand Rail | Formed 304 Stainless Steel | 1" Outside Diameter | 5/16" Fastener - 254324-1 - 354-2543241F1
Constructed of corrosion resistant formed 304 stainless steel. These Surface Mount Hand Rails install easily with two 5/16" FH fasteners (not included). Locate a hand rail quickly and conveniently wherever needed. 1" OD tubing for a comfortable grip.
Seadog Surface Mount Hand Rail | Formed 304 Stainless Steel | 1" Outside Diameter | 5/16" Fastener - 254318-1 - 354-2543181F1
Constructed of corrosion resistant formed 304 stainless steel. These Surface Mount Hand Rails install easily with two 5/16" FH fasteners (not included). Locate a hand rail quickly and conveniently wherever needed. 1" OD tubing for a comfortable grip.
Seadog Surface Mount Hand Rail | Formed 304 Stainless Steel | 1" Outside Diameter | 5/16" Fastener - 254312-1 - 354-2543121F1
Constructed of corrosion resistant formed 304 stainless steel. These Surface Mount Hand Rails install easily with two 5/16" FH fasteners (not included). Locate a hand rail quickly and conveniently wherever needed. 1" OD tubing for a comfortable grip.
Seadog Stud Mount Hand Rail - Formed 304 Stainless Steel - 3/4" Outside Diameter - 5/16" Fastener - 254124-1 - 354-2541241F1
Formed 304 stainless steel stud mount hand rail. Use 5/16" fasteners.
Seadog Stud Mount Hand Rail - Formed 304 Stainless Steel - 3/4" Outside Diameter - 5/16" Fastener - 254118-1 - 354-2541181F1
Formed 304 stainless steel stud mount hand rail. Use 5/16" fasteners.
Seadog Stud Mount Hand Rail - Formed 304 Stainless Steel - 3/4" Outside Diameter - 5/16" Fastener - 254106-1 - 354-2541061F1
Formed 304 stainless steel stud mount hand rail. Use 5/16" fasteners.
Seadog Stamped Powder Coated Steel & Stainless Standard 12V Wiper Motor | 2-1/2" Shaft | Black Finish - 412328B-3 - 354-412328B3F1
Standard Wiper Motor for interior/protected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 110°. Corrosion proof powder coated all aluminum housing with stainless steel base plate, shaft, and knurled drive nut. Adjustable right or left-hand park, factory preset for left-hand park. Powers up to a 14" arm/blade combination (21" total length) using standard wiper arms. Same footprint as competitive standard wiper motors. Black only. CE approved. 3-year warranty.
Seadog Stamped Powder Coated Steel & Stainless Standard 12V Wiper Motor | 2-1/2" Shaft | Black Finish - 412321B-3 - 354-412321B3F1
Standard Wiper Motor for interior/protected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 110°. Corrosion proof powder coated all aluminum housing with stainless steel base plate, shaft, and knurled drive nut. Adjustable right or left-hand park, factory preset for left-hand park. Powers up to a 14" arm/blade combination (21" total length) using standard wiper arms. Same footprint as competitive standard wiper motors. Black only. CE approved. 3-year warranty.
Seadog Hinged Jaw Slide Fitting With Bolt | Investment Cast 316 Stainless | 1/4" Pin Size - 270167-1 - 354-2701671F1
Quickly and easily replace a damaged jaw slide. Hinged jaw slides allow for installation of the slide on the tubing without having to remove the top from the boat or remove canvas, end fitting, or straps in order to install a new fitting.
Seadog Hinged Jaw Slide Fitting With Bolt | Investment Cast 316 Stainless | 1/4" Pin Size - 270166-1 - 354-2701661F1
Quickly and easily replace a damaged jaw slide. Hinged jaw slides allow for installation of the slide on the tubing without having to remove the top from the boat or remove canvas, end fitting, or straps in order to install a new fitting.
Seadog Flush Mount Stainless Steel Rod Holder - 325176-1 - 354-3251761F1
Flush Mount Rod Holders are constructed of corrosion resistant formed 316 stainless steel. Features a 30° angle. Accommodates rods up to 1-1/2". Installs with three #12 FH fasteners (not included).
Seadog Flush Mount Combo Drink Holder W/Drain Fitting - 588065 - 354-588065F1
Flush Mount Combo Drink Holders with Drain Fittings feature a dual-purpose design that allows the use of beverage cans with or without insulated can wraps, as well as most standard size bottles. Integral drain fitting allows water to be drained directly into the bilge with the use of 1/4" tubing (not included). Requires a 3-5/8" diameter hole for installation. The bottom is padded with a rubber insert to prevent rattling. Includes mounting gasket. Constructed of corrosion resistant stamped 304 stainless steel.
Seadog Chain Stopper Formed 304 Stainless Steel - 321825-1 - 354-3218251F1
Constructed of formed 304 stainless steel for strength and corrosion resistance, these Chain Stoppers help prevent damage to the windlass and reduce the risk of accidental free fall of the anchor while under way. Chain Stoppers mount alone or inside most bow rollers and work with your anchor roller to take tension off your windlass. Chain and rope should be secured at anchor when your windlass is not in use to avoid high loads the windlass was not designed for.Fits chain sizes 5/16"- 3/8".
Seadog Chain Stopper Formed 304 Stainless Steel - 321820-1 - 354-3218201F1
Constructed of formed 304 stainless steel for strength and corrosion resistance, these Chain Stoppers help prevent damage to the windlass and reduce the risk of accidental free fall of the anchor while under way. Chain Stoppers mount alone or inside most bow rollers and work with your anchor roller to take tension off your windlass. Chain and rope should be secured at anchor when your windlass is not in use to avoid high loads the windlass was not designed for.Fits chain sizes 3/16"- 1/4".
Seadog Bow Chocks - 316 Stainless Steel - 060043-1 - 354-0600431F1
Corrosion resistant investment cast 316 stainless bow chocks provide a smooth lead for your mooring or dock lines minimizing deck abrasion of working lines under load. Rounded edges and proper slant prevent chafing. Sold as a pair of left and right bow chocks. Installs with two FH fasteners (not included).
Seadog Bow Chocks - 316 Stainless Steel - 060040-1 - 354-0600401F1
Corrosion resistant investment cast 316 stainless bow chocks provide a smooth lead for your mooring or dock lines minimizing deck abrasion of working lines under load. Rounded edges and proper slant prevent chafing. Sold as a pair of left and right bow chocks. Installs with two FH fasteners (not included).
Seadog Anchor Swivel | Investment Cast 316 Stainless Steel - 182612-1 - 354-1826121F1
Investment cast AISI 316 stainless steel swivel anchor connectors are designed to easily slide over anchor rollers, preventing snagging, minimizing wear on the bow roller and windlass. These precision, high quality swivels feature double locking pins for extra security. Can be used between anchor and chain or between chain and line.
Seadog Anchor Swivel | Investment Cast 316 Stainless Steel - 182608-1 - 354-1826081F1
Investment cast AISI 316 stainless steel swivel anchor connectors are designed to easily slide over anchor rollers, preventing snagging, minimizing wear on the bow roller and windlass. These precision, high quality swivels feature double locking pins for extra security. Can be used between anchor and chain or between chain and line.
Seadog Adjustable Wiper Arm - Formed 304 Stainless Steel - Black Finish - 413124B-1 - 354-413124B1F1
Formed 304 stainless steel adjustable wiper arm.
Seadog Adjustable Wiper Arm - Formed 304 Stainless Steel - Black Finish - 413114B-1 - 354-413114B1F1
Formed 304 stainless steel adjustable wiper arm.
Seadog Adjustable Wiper Arm - Formed 304 Stainless Steel - Black Finish - 413111B-1 - 354-413111B1F1
Formed 304 stainless steel adjustable wiper arm.
Seadog Adjustable Pantographic Wiper Arm | 304 Stainless Steel | Black Finish - 413319-1 - 354-4133191F1
Adjustable Pantographic Wiper Arm for use on standard MRV and heavy duty waterproof wiper motors with 5/8" shaft diameter. Compatible with 1.5" and 2.5" shafts. Formed 304 stainless steel construction.
Seadog Adjustable Pantographic Wiper Arm | 304 Stainless Steel | Black Finish - 413317-1 - 354-4133171F1
Adjustable Pantographic Wiper Arm for use on standard MRV and heavy duty waterproof wiper motors with 5/8" shaft diameter. Compatible with 1.5" and 2.5" shafts. Formed 304 stainless steel construction.
Seadog Adjustable Pantographic Wiper Arm - 304 Stainless Steel - Black Finish - 413322-1 - 354-4133221F1
Adjustable Pantographic Wiper Arm for use on standard MRV and heavy duty waterproof wiper motors with 5/8" shaft diameter. Compatible with 1.5 and 2.5" shafts. Formed 304 stainless steel construction.
Seadog 588250 Stainless Steel Drink Holder - Adjusts For Containers With 2-3/8" To 3-7/8" Diameter. #8 Fastener - 588250-1 - 354-5882501F1
Adjustable Folding Drink Holder folds to a closed depth of 3/4. Accommodates drink containers up to 3-7/8" in diameter. Corrosion resistant stamped 304 stainless steel construction. Installs with two #8 RH fasteners (not included).
Seadog 588061N Flush Mount Combo Drink Holder W/Drain Fitting, White - 588061N - 354-588061Nf1
Flush Mount Combo Drink Holders feature a dual-purpose design which allows the use of beverage cans with or without insulated can wraps, as well as most standard size bottles. Integral drain fitting allows water to be drained directly into the bilge with the use of 1/4" tubing (not included). Requires a 3-3/4" diameter hole for installation. Available in black or white (or gray by special order). Constructed of impact resistant injection molded ABS.
Seadog 588060N Flush Mount Combo Drink Holder W/Drain Fitting, Black - 588060N - 354-588060Nf1
Flush Mount Combo Drink Holders feature a dual-purpose design which allows the use of beverage cans with or without insulated can wraps, as well as most standard size bottles. Integral drain fitting allows water to be drained directly into the bilge with the use of 1/4" tubing (not included). Requires a 3-3/4" diameter hole for installation. Available in black or white (or gray by special order). Constructed of impact resistant injection molded ABS.
