Select Category
Plumbing & Bilge
Hose Barb Elbow 1/4 X 1/4 - 32039 - 38-32039F1
Brass. NOT TO BE USED IN POTABLE WATER SYSTEMS.
Hose Barb Elbow 3/8 X 1/4 - 32041 - 38-32041F1
Brass. NOT TO BE USED IN POTABLE WATER SYSTEMS.
Hose Barb Elbow 5/16 X 1/4 - 32040 - 38-32040F1
Brass. NOT TO BE USED IN POTABLE WATER SYSTEMS.
Hose Barb Tee 3/8" - 32-160 - 38-32126F1
Hose Barb Tee 3/8" NOT TO BE USED IN POTABLE WATER SYSTEMS.
Hose Barb, Male - 033405-10 - 114-03340510 Superseded By: 47-8074F1
Allows customers to customize their fuel line assemblies to match existing connectors on their fuel tanks! All fittings are built to OEM specifications for replacement parts and use o-ring construction for tight, leak-free connections. NOT TO BE USED IN POTABLE WATER SYSTEMS.
Hose Clamp-4 1/16" To 5" - 815504272 - 710-54-815504272F1
Hose Cooler To Therm Housing - 16011 - 710-32-16011F1
Hose Deck Fill Replacement Cap - 351390-1 - 354-3513901F1
Cast 316 stainless steel.
Hose Exhaust-Water 10Inx12.5Ft - 16-200-10004 - 88-20010004F1
Hose Fitting Assy - 865208T01 - 710-22-865208T01F1
Hose Kit Rigging - 825191A03 - 710-32-825191A03F1
Hose Kit Ss<32-43437 - 8M0090859 - 710-32-8M0090859F1
Hose Kit W/Dual Bend Rest 2/Bx - Kitobdbr-2.5' - 216-Kitobdbr25F1
Two hoses with swaged fittings featuring bend restrictors are suitable for use with Uflex cylinders and helms. OBDBR hoses have bend restrictors on both ends. Compatible with Seastar Solutions helms and cylinders. These are rated to 1500 PSI working pressure, but not recommended for racing applications. Specify length when ordering. 2 hoses per kit.
Hose Kit W/Dual Bend Restr 2 I - Kitobdbr-02' - 216-Kitobdbr02F1
Two hoses with swaged fittings featuring bend restrictors are suitable for use with Uflex cylinders and helms. OBDBR hoses have bend restrictors on both ends. Compatible with Seastar Solutions helms and cylinders. These are rated to 1500 PSI working pressure, but not recommended for racing applications. Specify length when ordering. 2 hoses per kit.
Hose Kit W/Dual Bend Restr 4 I - Kitobdbr-04' - 216-Kitobdbr04F1
Two hoses with swaged fittings featuring bend restrictors are suitable for use with Uflex cylinders and helms. OBDBR hoses have bend restrictors on both ends. Compatible with Seastar Solutions helms and cylinders. These are rated to 1500 PSI working pressure, but not recommended for racing applications. Specify length when ordering. 2 hoses per kit.
Hose Kt Oil Drain 12Mm - 865281A02 - 710-32-865281A02F1
Hose Mender 1/4 Brs Ss Clamp Replaces P/N 11-033211101 - 033211-10-1 - 114-033211101F1
Hose Mender 3/8 Brs Ss Clamp Replaces P/N 11-033213101 - 033213-10-1 - 114-033213101F1
Hose Mender 5/16 Brs Ss Clamp Replaces P/N 11-033212101 - 033212-10-1 - 114-033212101F1
Hose Molded T Hous Strb Man - 897301 - 710-32-897301F1
Hose Oil Cool Therm Hsg - 16012 - 710-32-16012F1
Hose Oil Cooler To Oil Coolr - 808045 - 710-32-808045F1
Hose P/S Cyl To Cooler 496 - 8062215 - 710-32-8062215F1
Hose P/S Pres Fittings 2 End - 90494 - 710-32-90494F1
Hose P/S Pres. Fittings 2End - 80622216 - 710-32-80622216F1
Hose P/S Return Fitting 1End - 80622142 - 710-32-80622142F1
Hose Pvc Reinf 1" W/Red & Blue Pmg - 162-1006 - 606-1621006Ftf1
Hose Sani Rubber Black 1-1/2" Pmg - 101-1126 - 606-1011126Ftf1
Hose Sani Rubber Blk 1-7/8" Pmg - 101-1786 - 606-101178F1
Hose Sanitation Rubber Blk 1 Pmg - 101-1006 - 606-101100F1
Hose Sanitation Rubber Wht 1 Pmg - 102-1006 - 606-102100F1
Hose T-Hsg To Strb Man - 807697 - 710-32-807697F1
Hose Therm Hsg Strb Ehx Man - 861318 - 710-32-861318F1
Hose Therm Stat To Manifold - 871171 - 710-32-871171F1
Hose Vac Xheavy Duty Clear W/B Pmg - 147-0346 - 606-147034F1
Hose Vac Xheavy Duty Clear W/B Pmg - 147-1006 - 606-147100F1
Hose Vac Xheavy Duty Clear W/B Pmg - 147-1126 - 606-147112F1
Hose Vac Xheavy Duty Clear W/B Pmg - 147-1146 - 606-147114F1
Hose Vac Xheavy Duty Clear W/B Pmg - 147-1186 - 606-147118F1
Hose Vac Xheavy Duty Solid Blk Pmg - 149-0346 - 606-149034F1
Hose Vac Xheavy Duty Solid Blk Pmg - 149-0586 - 606-149058F1
Hose Vac Xheavy Duty Solid Blk Pmg - 149-1006 - 606-149100F1
Hose Vac Xheavy Duty Solid Blk Pmg - 149-1126 - 606-149112F1
Hose Vac Xheavy Duty Solid Blk Pmg - 149-1146 - 606-149114F1
Hose Vac Xheavy Duty Solid Blk Pmg - 149-1186 - 606-149118F1
Hose Vent Elbow, 3" - 337350 - 354-337350F1
Hose Vent Elbows are constructed of impact resistant injection molded ABS. For use with 3" hose vents to create a 90° bend. Installation hole pattern matches Flush Thru Vents 337316, 337326, & 337590.
Hose-Therm Hsg Port Exh Man - 860144 - 710-32-860144F1
Hose-Therm Hsg Port Exh Man 305/350 - 160211 - 710-32-160211F1
Hose-Water Bulk Qs Ss<32-17435 79 - 8M0062666 - 710-32-8M0062666F1
Hubbell Hbl104 Yellow Watertight 30A 125V Locking Female To 15A 125V Straight Blade Male Adapter - Hbl104 - 36-Hbl104F1
Fully molded, watertight design.
Hubbell Hbl105 Yellow Watertight 15A/20A 125V Straight Blade Female To 30A 125V Locking Plug Male Adapter - Hbl105 - 36-Hbl105F1
Fully molded, watertight design.
Hubbell Hbl105Gf Yellow Watertight 30A Twist Lock To 15A Straight Blade Adapter With Gfci 30 - Hbl105Gf - 36-Hbl105Gff1
30 amp Twist-Lock to 15 amp straight blade adapter with GFCI. Now you can plug in your power drill, sander or any other 15 amp tool or appliance into that 30 amp outlet on the dock. Features manual reset button, high impact PVC housing - UV stabilized, sealed GFCI housing and keypad, and large LED power "on" light. Meets watertight requirements.
Hubbell Hbl21Cm29 White 15A/20A 125V Straight Blade Female Plug To 20A 125V Twist Lock Locking Male Adapter - Hbl21Cm29 - 36-Hbl21Cm29F1
Permits use of 15 amp or 20 amp 125 volt straight blade plug with 20 amp 125 volt twist-lock locking type receptacle. Not recommended for use in wet locations.
Hubbell Hbl303Ss Stainless Steel 30A 125V Shore Power Inlet - Hardware Included - Hbl303Ss - 36-Hbl303Ssf1
Interior has easy-to-wire terminations and is transparent for quick and easy visual inspection. Mounting holes are 2-3/8" on centers. Mounting screws, gasket and protective rear enclosure is included.
Hubbell Hbl303Sso Watertight Stainless Steel 30A 125V Shore Power Outlet - Hardware Included - Hbl303Sso - 36-Hbl303Ssof1
Stainless steel power outlet has gasketed, self-closing cover, watertight when cover is screwed in place. Mounting holes are 2-3/8" (60.3) on centers. Mounting screws and gasket included.
Hubbell Hbl31Cm28 White 30A 125V Twist Lock Female To 15A 125V Straight Blade Male Adapter - Hbl31Cm28 - 36-Hbl31Cm28F1
Permits use of 30 amp 125 volt twist-lock locking type plug with 15 amp 125 volt straight blade receptacle. Not UL listed. Not recommended for use in wet locations.
Hubbell Hbl31Cm29 White 15A/20A 125V Straight Blade Female To 30A 125V Twist Lock Male Adapter - Hbl31Cm29 - 36-Hbl31Cm29F1
Permits use of 15 amp or 20 amp 125 volt straight blade plug with 30 amp 125 volt twist-lock locking type receptacle. Not recommended for use in wet locations.
Hubbell Hbl61Cm55 Yellow Twist Lock Female To Twist Lock Male Adapter - Hbl61Cm55 - 36-Hbl61Cm55F1
Fully molded, watertight design.
Hubbell Hbl61Cm56 Yellow Twist Lock Female To Twist Lock Male Adapter - Hbl61Cm56 - 36-Hbl61Cm56F1
Fully molded, watertight design.
Hubbell Hbl61Cm71 Yellow Twist Lock Female To Twist Lock Male Adapter - Hbl61Cm71 - 36-Hbl61Cm71F1
Fully molded, watertight design.
Hubbell Hbl61Cm72 Yellow Twist Lock Female To Twist Lock Male Adapter - Hbl61Cm72 - 36-Hbl61Cm72F1
Fully molded, watertight design.
Hubbell Yellow "Y" Female To Male Adapter - Hbl64Cm54 - 36-Hbl64Cm54F1
Fully molded water tight design.
Hubbell Yellow "Y" Female To Male Adapter - Hbl64Cm56 - 36-Hbl64Cm56F1
Fully molded water tight design.
Hubbell Yellow "Y" Female To Male Adapter - Hbl64Cm57 - 36-Hbl64Cm57F1
Fully molded water tight design.
Hubbell Yq230 Yellow Intelligent "Y" (1) 50A 125V/250V Female To (2) 30A 125V Male Adapters - Yq230 - 36-Yq230F1
Safely powers 50 amp 125/250 volt boat from (2) 30 amp 125 volt receptacles at dockside. 4-pole contactor breaks both hots and both neutrals to prevent possible "live" plug when not engaged. UV resistant housing, 30 amp plug that connects to 30 amp shore power, safety indicator light, internal cord clamps, sealing grommets, anti-fog-rain-humidity environmental seal, 50 amp connector body that mates with boat cord set and Hubbell connector and plugs. Shuts off power if improper wiring condition exists on power center or if 1 plug is not fully engaged. Senses polarity of 30 amp receptacle on dock and (2) 30 amp receptacles from opposite phases.Note: The YQ230 Adapter will only work with two 30A receptacles that are on different phases. Not CSA Approved.
Humminbird 7000681 Open Water Adapter Kit - Mega Live - 700068-1 - 137-7000681F1
Adapter kit includes all accessories needed to convert the MEGA Live Imaging™ transducer for use on a boat. Compatible with: MEGA Live Imaging Transducer, Minn Kota® Ultrex™, and Minn Kota ® Fortrex®.Includes: Shaft clamp, and all required cables (transducer and shaft sold separately).
Humminbird 72007412 12" Ethernet Adapter Cable - 720074-12 - 137-72007412F1
Ethernet adapter cable.
Humminbird 7201131 30" As Gps Adapter Apex To External Gps - 720113-1 - 137-7201131F1
An adapter cable that allows APEX chartplotters to connect with a Humminbird external GPS receiver. Combined with an external GPS receiver, users will get extremely accurate position readings with AS GRP receiver (sold separately), or choose to get both accurate GPS readings and a constant compass heading with AS GPS HS (sold separately). Cable measures 30" and connects to the MFD via a waterproof, twist-lock connector.
Humminbird 7201141 As Qd Adapter Helix G4N Nmea 2000 - 720114-1 - 137-7201141F1
Adapter cable will allow you to connect a HELIX G4N fish finder to drop cable from an existing NMEA 2000 backbone (sold separately). Cable is less than 10' long.
Humminbird 740159-1 Ad Mtm Trolling Motor Adapter - 740159-1 - 137-7401591F1
?This hardware kit adapts our MEGA transom mount transducer for use on the trolling motor.
Humminbird 740181-1 Ad Mtm Hw Mdi Trolling Motor Adapter Bracket - 740181-1 - 137-7401811F1
Converts a MEGA Down Imaging+ transom mount transducer for trolling motor use. With a rugged composite design, it conforms to the trolling motor for a low profile fit.
Humminbird 740182-1 Ad Mtm Hw Msi Trolling Motor Adapter Bracket - 740182-1 - 137-7401821F1
Converts a MEGA Side Imaging+ transom mount transducer for trolling motor use. With a rugged composite design, it conforms to the trolling motor for a low profile fit.
Humminbird 7402041 Ice Adapter Kit - Mega 360 - 740204-1 - 137-7402041F1
The MEGA 360 ICE Adapter includes all the components needed to convert a MEGA 360 Imaging transducer for use while ICE fishing. It has it all. Master power switch, quick-connect SAE power cables, large handle, multiple 1/4"-20 mounting options for accessories, two rod holders, cable and transducer management, and a battery cover. Compatible with: Helix 7, 8, 9, and 10 CHIRP models.What's Included: 10" base, handle, adjustable depth collar, Heading Sensor GPS Puck, and custom power, transducer, and Y cables.
Humminbird 7402101 Mega Live Target Lock Adapter Kit - Ultrex 45"-52" - 740210-1 - 137-7402101F1
This adapter kit is for users who have a MEGA Live Imaging Transducer and Minn Kota® Ultrex™ trolling motor and are looking to add the advantages of MEGA Live TargetLock. MEGA Live TargetLock™ is independently mounted from the trolling motor shaft and provides full use of the trolling motor, including Spot-Lock®, without sacrificing the sonar view. The TargetLock feature allows anglers to lock the MEGA Live beam in the direction of structure, so even when the boat moves, the MEGA Live view stays fixed in that direction. MEGA Live Imaging™ provides the most impressive live sonar on the water, allowing the angler to watch fish and structure in real-time, in their choice of views; Down, Forward and Landscape Modes. Engineered specifically for Minn Kota® Ultrex™ Trolling Motors to unlock exclusive features of the One-Boat Network® like TargetLock, MEGA Live Sweep (requires source for Heading), and Minn Kota Steer (requires motor with i-Pilot Link). Includes: Includes MEGA Live Steering Assembly, Wireless Foot Pedal, Ultrex Mounting Kit and Hardware, 20' Ethernet Cable, and 10' Power Cable. Transducer and trolling motor Not Included.
Humminbird 7402151 Ice Adapter Kit - Mega Live - 740215-1 - 137-7402151F1
The MEGA Live ICE Adapter includes all the components needed to convert a MEGA Live Imaging transducer for use while ICE fishing. Compatible with: MEGA Live Imaging. Multi-piece pole breaks down into three sections for varying ice depths and a more compact footprint for storage.Includes: Shaft, 10" base, handle, adjustable depth collar and custom power and ethernet cables.
Humminbird 7402221 Mega Live Target Lock Adapter Kit - Ultrex 60" - 740222-1 - 137-7402221F1
This adapter kit is for users who have a MEGA Live Imaging Transducer and Minn Kota® Ultrex™ trolling motor and are looking to add the advantages of MEGA Live TargetLock. MEGA Live TargetLock™ is independently mounted from the trolling motor shaft and provides full use of the trolling motor, including Spot-Lock®, without sacrificing the sonar view. The TargetLock feature allows anglers to lock the MEGA Live beam in the direction of structure, so even when the boat moves, the MEGA Live view stays fixed in that direction. MEGA Live Imaging™ provides the most impressive live sonar on the water, allowing the angler to watch fish and structure in real-time, in their choice of views; Down, Forward and Landscape Modes. Engineered specifically for Minn Kota® Ultrex™ Trolling Motors to unlock exclusive features of the One-Boat Network® like TargetLock, MEGA Live Sweep (requires source for Heading), and Minn Kota Steer (requires motor with i-Pilot Link). Includes: Includes MEGA Live Steering Assembly, Wireless Foot Pedal, Ultrex Mounting Kit and Hardware, 20' Ethernet Cable, and 10' Power Cable. Transducer and trolling motor Not Included.
Hyd Fitting Union 3/8 Comp Pmg - Union 62Ca-6 - 216-Ult62Cacf1
Hyde 06888 8" Flexible Full-Metal™ Stainless Steel Joint Knife - 6888 - 292-06888F1
All-metal design many pros prefer. Features a hollow ground blade for the perfect flex and includes a Hammer Head® for setting nails and dimpling nail holes. Made of durable stainless steel, they are rust-resistant and easy to clean. Stainless-steel handle and bladeDurable constructionFlexible hollow-ground bladeHammer Head® handle
Hydro Flame Blower Wheel 85-Iii Rep. 36170 - 33126 - 814-33126F1
See AtwoodMobile website for detailed application information.
