Select Category
Plumbing & Bilge
Stainless Steel Nautalift™ Gas Lift Supports - Gss62740 - 11-Gss62740F1
Marine grade gas filled supports designed for saltwater applications. 316L Stainless steel rod and cylinder. Features engineered polymer rod ends, bronze bushings, multi-lobe internal seal.
Stainless Steel Nautalift™ Gas Lift Supports - Gss62770 - 11-Gss62770F1
Marine grade gas filled supports designed for saltwater applications. 316L Stainless steel rod and cylinder. Features engineered polymer rod ends, bronze bushings, multi-lobe internal seal.
Stainless Steel Nautalift™ Gas Lift Supports - Gss62780 - 11-Gss62780F1
Marine grade gas filled supports designed for saltwater applications. 316L Stainless steel rod and cylinder. Features engineered polymer rod ends, bronze bushings, multi-lobe internal seal.
Stainless Steel Nautalift™ Gas Lift Supports - Gss62790 - 11-Gss62790F1
Marine grade gas filled supports designed for saltwater applications. 316L Stainless steel rod and cylinder. Features engineered polymer rod ends, bronze bushings, multi-lobe internal seal.
Stainless Steel Receiver And Coupler Lock Combo - 580406 - 220-580406F1
This simple, convenient stainless steel set is keyed alike for ease-of-use. Sleeve allows receiver lock to be used on 2" x 2" or 1-1/4" x 1-1/4" receivers and features a dust cap for dust and corrosion resistance.
Stainless Steel Receiver Lock - 580405 - 220-580405F1
Sleeve allows lock to be used on 2" x 2" or 1-1/4" x 1-1/4" receivers. Safe and secure, it will keep your vehicle and trailer connected. Covered key slot helps prevent dust and corrosion in the locking mechanism.
Stainless Steel Scupper Valve - 66553-3 - 23-665533F1
Backed by Attwood's trusted Lifetime Warranty! Why specify plastic parts when these fittings will last the life of the boat. The scupper flap is tough neoprene rubber with a molded V that fits into the grooved body to reduce back wash. Fastners are concealed and corrosion-proof. Lifetime warranty. Rugged Stainless Construction Cast from certified enhanced 316 Stainless Steel for strength and lifetime corrosion-resistance.We polish all visible areas to a mirror finish, then each part goes through a passivation for additional protectionThick steel sidewalls withstand continual stress and hose flexing Caution: Thru-Hull connectors are designed for installation above the water line only
Starbrite 40034 Screw Thread Adapter Fits Quick Connect Handles (Sold Separately) - 40034 - 74-40034F1
Allows the use of screw thread accessories with Extend-A-Brush handles.
Starbrite 40058 Stainles Steel Bristle Utility Brush With Scraper - 40058 - 74-40058F1
Wood handle
Starbrite 40135 Shurhold Accessory To Starbrite Quick Connect Handle Adapter - 40135 - 74-40135F1
Made from triple anodized aluminum.40135: Adapts any Premium Star Brite Extend-A-Brush handle to a Shurhold brush.40136: Adapts any Premium Star Brite Extend-A-Brush brush to a Shurhold handle.
Starbrite 91820 Bulk Bilge Pads 17" X 19" X 3/16" (200/Bail) - 91820 - 74-91820F1
Special lightweight, absorbent fabric soaks up petro chemicals but does not absorb water. Each pad absorbs 20 to 30 times its weight. Great for bilge areas and engine rooms.
Starbrite 91845 Bilge Oil Pads 17" X 19" X 3/8" (5 Per Pack) - 91845 - 74-91845F1
The most effective way to clean up or avoid an oil or fuel spill. Quickly absorbs oil and fuel, but will not absorb water. Made of high-quality, virgin materials; will not unravel. Can be wrung out and re-used. Ideal for wrapping fuel nozzle to prevent refueling spills.
Starbrite Orange Citrus Bilge Cleaner, 32 Oz. - 94432 - 74-94432F1
The easiest way to clean bilge of grime and ordor. Just pour in, run boat, pumpout.
Starbrite Orange Citrus Bilge Cleaner, Gal. - 094400N - 74-94400F1
The easiest way to clean bilge of grime and ordor. Just pour in, run boat, pumpout.
Starbrite Stainless Steel Bristle Cleaning Brush - 40059 - 74-40059F1
Wood handle
Stealth Clamps 0.75 Square - St-Adp-Sq .75 - 619-Stadpsq75F1
Stealth Clamps 1 Square - St-Adp-Sq 1.0 - 619-Stadpsq10F1
Stealth Clamps 1.25 Square - St-Adp-Sq 1.25 - 619-Stadpsq125F1
Stealth Clamps 1.5 Pipe - St-Adp-Rnd 1.5 - 619-Stadprnd15F1
Stealth Clamps 1.75 Pipe - St-Adp-Rnd 1.75 - 619-Stadprnd175F1
Stealth Clamps 2 Tubing - St-Adp-Rnd 2.0 T - 619-Stadprnd20Tf1
Steel Driver Bits #1 - Rp-Sc3423 - 50-01209F1
2" Long, 1/4" Hex Drive
Steel Driver Bits #2 - Rp-Sc3424 - 50-01211F1
2" Long, 1/4" Hex Drive
Steel Driver Bits #3 - Rp-Sc2832 - 50-01437F1
2" Long, 1/4" Hex Drive
Steel Driver Bits#2 - Rp-Sc2831 - 50-01436F1
2" Long, 1/4" Hex Drive
Steel Driver Bits#3 - Rp-Sc3425 - 50-01213F1
2" Long, 1/4" Hex Drive
Steel Strap Mounting Bracket - 420118 - 234-420118F1
Heavy duty steel straps. Fits 10BC & 1-A10BC, 5BC Mariner models w/gauge.
Steering And Engine 2025 - Planogram13 - 50-Planogram13F1
Steering Arm Extension Kit - 17729A1 - 710-17729A1F1
Steering Cyl Kit - 8M0118141 - 710-8M0118141F1
Steering Lever Washer Lower - 98548 - 710-12-98548F1
Steering Wheel-Black Poly 5-Spoke - V70B - 216-V70Bf1
High quality 304 Stainless Steel 5 spoke steering wheel featuring welded spokes and hub. 3/4" tapered shaft fits nearly every steering helm in the market.V70B features soft polyurethane grip with patterned texture for comfortable yet tactile feel.
Steering Whl Ss Grip Ss 5 Spk - V06 - 216-V06F1
Non-magnetic and constructed of high grade stainless steel5 spokeFits standard 3/4" tapered shaft2.6" depthHub included
Steering Whl-Black Grip Ss 5-Spk - V01 - 216-V01F1
Non-magnetic and constructed of high grade stainless steel5 spokeFits standard 3/4" tapered shaft2.6" depthHub included
Steering Whl-Mah Grip Ss 5-Spk - V05 - 216-V05F1
Non-magnetic and constructed of high grade stainless steel5 spokeFits standard 3/4" tapered shaft2.6" depthHub included
Stepless Ear Clamp O/B @5 Qs Ss<54-856880 - 8M0214964 - 710-54-8M0214964F1
Sterndrive Power Trim Hose - 18-2103 - 47-2103F1
See Sierra catalog for complete application information.
Straight Adapter Kit - 93-2220 - 100-932220F1
For holding tanks and enables boatman to plug existing threaded fitting opening and to position new openings for fittings anywhere on tank. Comes with instructions.
Straight Maile Sanitation Hose Fitting - N800-0340 - 88-8000340F1
Fiberglass reinforced nylon fittings designed to fit series 101, 105 and series 144 and 148 hoses without heating or special tools. For use in sanitation systems, deck drain systems and water tank fill. Chemical and fuel resistant.
Straight Maile Sanitation Hose Fitting - N800-1180 - 88-8001180F1
Fiberglass reinforced nylon fittings designed to fit series 101, 105 and series 144 and 148 hoses without heating or special tools. For use in sanitation systems, deck drain systems and water tank fill. Chemical and fuel resistant.
Straight Stop Crimp Valve 1/2" Pexlock Plumbing Fitting - 30879 - 497-30879F1
Strainer Zinc - Bsmbsstr - 377-Bsmbsstrf1
Strainer Anode - Zinc
Strainer Zinc Indokain - Bsmdoka - 377-Bsmdokaf1
Strainer Anode - Zinc
Stromberg Carlson S150 Steel Platform Step, 24" X 16" - S-150 - 375-S150F1
This Steel Platform step is stable in all directions. All legs deploy past the plane of the platform to keep you safe and sound traveling up and down our step. All steel construction with easy folding legs. Works at two heights: 4" and 8". Non skid tape on platform surface keeps your foot planted where you put it.
Stud Exh Elbow To Man 496 - 8204511 - 710-16-8204511F1
Superbuff™ Adapter #05710 - 5710 - 71-05710F1
Adaptor for the 3M™ Superbuff™ Buffing Pads (PNs 05700, 05703, 05704, and 05705). Has a 5/8-11 internal thread which turns in to a polisher, and a short 5/8-11 external thread on other end. Works with 3M™ Perfect-It™ Backup Pad (PN 05718).
Swivleze 238 Series Seat Mount, Forward Handle, 3° Angle, Plated Steel, Bulk - 238153-1 - 148-2381531F1
With auto lock
Swivleze 238 Series Seat Mount, Right Handle, 3° Angle, Plated Steel - 238152-7 - 148-2381527F1
With auto lock
Swivleze 238 Series Seat Mount, Right Handle, 3° Angle, Plated Steel, Bulk - 238152-1 - 148-2381521F1
With auto lock
Swivleze 238 Series Seat Mount, Right Handle, 3° Angle, Stainless Steel - 238142-7 - 148-2381427F1
With auto lock
T Adapter Peak Reading Volt Built In Test Leads Tips Fit Most Test Clips - 18-99534 - 47-99534F1
T Check Valve Filler Vent Check Valve Includes: 4' Hose - 18-99546 - 47-99546F1
T-Bolt Clamp, 8-19/64" To 8-7/8" - 70Stbc875L - 379-70Stbc875Lf1
3/4" - 301 stainless steel band 3-1/2" - 305 stainless T-Bolt18-8 stainless steel lock nut with nylon insert
T-Fitting, Boss Style - 71955T - 216-71955Tf1
The 71955T is a hydraulic fitting for use with the UC128 and UC128 series cylinders and all UP series helms. Nickel.
T-H Marine 12V Complete Pro-Air System Livewell Aeration Kit With Air Stones - Pas1Dp - 232-Pas1Dpf1
Insures long lasting dependable oxygen-rich air source to your livewell or baitwell. Capable of aerating both front and rear livewells at the same time. Complete with pump, two air stone mounts, two air stones, an attractive switch-panel with switch for controlling pump, and 20 feet of air line tubing.
T-H Marine 12V Pump Only For Pro-Air System Livewell Aeration - Pap1Dp - 232-Pap1Dpf1
Insures long lasting dependable oxygen-rich air source to your livewell or baitwell. Capable of aerating both front and rear livewells at the same time. Complete with pump, two air stone mounts, two air stones, an attractive switch-panel with switch for controlling pump, and 20 feet of air line tubing.
T-H Marine 90 Degree Specialty Thru-Hull Fitting With Spanner Head 3/4", Black - Th7590Sdp - 232-Th7590Sdpf1
High quality UV and chemical resistant virgin polypropelene. Features a finished head and a single pass around nut.
T-H Marine 90 Degree Thru-Hull Fitting For Hose - Th1292Dp - 232-Th1292Dpf1
High quality UV and chemical resistant virgin polypropelene. Features a finished head and a single pass around nut.
T-H Marine 90 Degree Thru-Hull Fitting For Hose - Th1590Dp - 232-Th1590Dpf1
High quality UV and chemical resistant virgin polypropelene. Features a finished head and a single pass around nut.
T-H Marine 90 Degree Thru-Hull Fitting For Hose - Th7592Dp - 232-Th7592Dpf1
High quality UV and chemical resistant virgin polypropelene. Features a finished head and a single pass around nut.
T-H Marine Adjustable Steering Console Mount From 10" To 20" H - Scm2Dp - 232-Scm2Dpf1
This aluminum console features welded construction, plywood reinforced face for steering wheel mounting, adjustable height, space for mounting switches and instruments, and a flat top for depth finder mounting. Adaptable to most aluminum or fiberglass boats.
T-H Marine Aerator Spray Head/Wash Down Fitting, Black - Ahvwd90Dp - 232-Ahvwd90Dpf1
Single fitting handles both jobsPositive action shut-off valveMulti-directional spray head
T-H Marine Ahv1Dp Straight Aerator Head W/Shut-Off Valve, 3/4", Black - Ahv1Dp - 232-Ahv1Dpf1
Straight Aerator Head w/Shut-Off Valve, 3/4" Black
T-H Marine Ahv90Dp Aerator Spray Head 90° Screw On Valve W/Shut Off, 3/4", Black - Ahv90Dp - 232-Ahv90Dpf1
T-H Marine Aerator Spray Head 90° Screw On Valve With Shut-Off 3/4" Black
T-H Marine Ahv92Dp Aerator Spray Head 90° Fixed Flange W/Shut Off, 3/4", White - Ahv92Dp - 232-Ahv92Dpf1
T-H Marine Aerator Spray Head 90° Fixed Flange With Shut-Off 3/4", White
T-H Marine Brite Plate Chrome Plated 90 Degree Thru Hull For Hose - Th1290Cpdp - 232-Th1290Cpdpf1
High quality UV and chemical resistant virgin polypropelene. Features a finished head and a single pass around nut.
T-H Marine Brite Plate Chrome Plated 90 Degree Thru Hull For Hose - Th1590Cpdp - 232-Th1590Cpdpf1
High quality UV and chemical resistant virgin polypropelene. Features a finished head and a single pass around nut.
T-H Marine Brite Plate Chrome Plated 90 Degree Thru Hull For Hose - Th7590Cpdp - 232-Th7590Cpdpf1
High quality UV and chemical resistant virgin polypropelene. Features a finished head and a single pass around nut.
T-H Marine Bsr1Kdp Bulkhead Strain Relief Hose Kit - Bsr1Kdp - 232-Bsr1Kdpf1
Distributes strain from bends in .250 OD to .485 OD hose. Watertight gripper fitting-no leaks. Requires 1-1/4" installation hole.For bulk hose only, pre-made hoses with end fittings cannot pass through.
T-H Marine Cockpit Scupper Drain 90 Degree Outlet 1-1/2", White - Csd92Dp - 232-Csd92Dpf1
The check ball provides better sealing against reverse water flow that occurs when backing boat. Injection molded part is high strength and UV stabilized to provide value and durabilityTop of cockpit scupper drain is removable for cleaning90° Outlet
T-H Marine Dahik118Dp Directional Flow Aerator Head, Fits: 1-1/8" - Dahik-118-Dp - 232-Dahik118Dpf1
Designed to create a vital circular current flow that improves baitfish health and reduces crowding. Creates a strong directional flow of water to help baitfish breathe easier in harsh conditionsCreate a directional flow of water around any baitwellAllows baitfish to breathe easier and live longer in harsh conditionsLow profile, rounded head prevents injury to delicate bait
T-H Marine Drain Plug Fits 1" Hose, Black - Dp1Dp - 232-Dp1Dpf1
A screw-type plug made of black nylon and features an O-ring for tight sealing. Fine thread insures sealing under high vibration and prevents cross threading. Mounts in a 1" diameter hole. Black nylon.
T-H Marine Flush Mount Scupper Adapter - Sa1Dp - 232-Sa1Dpf1
Mounts over 1" to 1-1/4" drain tubesGrooved inside to fit over drain flange
T-H Marine Flush Mount Scupper Adapter - Sa2Bdp - 232-Sa2Bdpf1
Mounts over 1" to 1-1/4" drain tubesGrooved inside to fit over drain flange
T-H Marine G-Force Clamp-On Trolling Motor Cable And Handle, Red - Gfh-Ca1R-Dp - 232-Gfhca1Rdpf1
This trolling motor replacement release & lift system is a rugged, nylon jacketed stainless steel cable with a large comfortable cushioned grip handle which solves the problem of the cheap lift & release ropes on today's trolling motors. Fits most models and makes of trolling motors. GFH-CA1R-DP is a G-Force handle for the latest in digital / wireless trolling motors that attaches with a clamp on the shaft of the trolling motor. Ths clamp on model is designed to fit Minn Kota Terrova, Riptide, and Auto Pilot , as well as the MotorGuide Xi5.
T-H Marine Inline Scupper Double Barb, Black - Ils1200Dp - 232-Ils1200Dpf1
Prevents backwash Chemical resistant materialsThermo-plastic flapper
T-H Marine Inline Scupper Double Barb, Black - Ils1500Dp - 232-Ils1500Dpf1
Prevents backwash Chemical resistant materialsThermo-plastic flapper
T-H Marine Inline Scupper Double Barb, Black - Ils750Dp - 232-Ils750Dpf1
Prevents backwash Chemical resistant materialsThermo-plastic flapper
T-H Marine Large Rectangular Scupper Fits 2 X 5-1/2" Hole, White - Lrs2Dp - 232-Lrs2Dpf1
Quickly drains decks For decks above waterlineMaximum drainage for larger boatsEasily clears debrisFits 2" x 5-1/2" hole
T-H Marine Micro Jacker Clamp-On Motor Adapter - Ahjm-Cma-Dp - 232-Ahjmcmaf1
O/B Clamp On Adaptor
T-H Marine Oetiker Stainless Steel Stepless Ear Clamp Kit With Crimping Tool (Contains 10 Each Of The 15 Most Needed Sizes) - 18500000 - 232-18500000F1
Oetiker one ear hose clamps with mechanical interlock. Specially formed strip edges reduce the risk of damage to the part being clamped. Mechanical interlock allows use of pre-coated materials. Available in key sizes. Uniform compression and increased clamping force. Features: All 304 stainless steel, Narrow band - 7mm, Lightweight designTampering is visibleFull size range for all marine hose Kit Includes:16700001 5.8 - 7.0mm 16700004 7.8 - 9.5mm16700006 8.8 - 10.5mm (3/8) 16700007 9.6 - 11.3mm16700010 10.8 - 13.3mm16700011 11.0 - 13.8mm (1/2)16700012 11.5 - 14.0mm 16700013 12.0 - 14.5mm16700016 13.2 - 15.7mm16700017 14.5 - 17.0mm (5/8)16700020 15.3 - 18.5mm 16700024 17.8 - 21.0mm (3/4)16700031 22.4 - 25.6mm (1)16700037 26.9 - 30.1mm (1-1/8")16700040 28.4 - 31.6mm16705000 34.9 - 38.1mm (1-1/2) 16705989 37.8 - 41.0mm14100396 Standard Jaw Pincers (formerly 14100118)
T-H Marine Push In Overflow Drain Tube 90 Degree First All T-H 1-1/2" Thru Hulls, 18" L With Screen - Odt290Dp - 232-Odt290Dpf1
These overflow drain tubes feature a tough, flexible vinyl plastic end with a standpipe of white PVC tubing. To use simply insert vinyl end into the opening of thru-hull fitting. To drain livewell or baitwell, simply remove. Can be cut to customer's lengths.
T-H Marine Push In Overflow Drain Tube 90 Degree Fits All 1-1/8" T-H Thru Hulls, 12" L - Odt190Dp - 232-Odt190Dpf1
These overflow drain tubes feature a tough, flexible vinyl plastic end with a standpipe of white PVC tubing. To use simply insert vinyl end into the opening of thru-hull fitting. To drain livewell or baitwell, simply remove. Can be cut to customer's lengths.
T-H Marine Push In Overflow Drain Tube Straight Fits All T-H 1-1/2" Thru Hulls, 18" L With Screen - Odt2Dp - 232-Odt2Dpf1
These overflow drain tubes feature a tough, flexible vinyl plastic end with a standpipe of white PVC tubing. To use simply insert vinyl end into the opening of thru-hull fitting. To drain livewell or baitwell, simply remove. Can be cut to customer's lengths.
T-H Marine Push In Overflow Drain Tube Straight Fits All T-H 1-1/8" Thru Hulls, 12" L - Odt1Dp - 232-Odt1Dpf1
These overflow drain tubes feature a tough, flexible vinyl plastic end with a standpipe of white PVC tubing. To use simply insert vinyl end into the opening of thru-hull fitting. To drain livewell or baitwell, simply remove. Can be cut to customer's lengths.
T-H Marine Push-In Plug For 1-1/2" Thru-Hull Drains - Pp150 - 232-Pp150F1
These push in plugs are used to stop water flow through drains or overflows from baitwell or livewell. Also work well as plugs for sink drains and built in cooler drains. These plugs are injection molded of marine grade PVC for a long lifespan. Plugs feature a pull tab or pull ring for easy removal. They have double seal rings to assure positive sealing.
T-H Marine Reducing Tee For Hose 1-1/2 X 3/4 X 1-1/2" , Black - Tee150Dp - 232-Tee150Dpf1
T-H Marine Rfk1Cpdp Chrome Rigging Flange Hose And 4' Of 2" Black Hose - Rfk1Cpdp - 232-Rfk1Cpdpf1
These components provide an excellent system to protect cables and wiring from dirt, abrasion, sun and water. The rigging flange serves to connect the rigging hose from the engine to the boat. The flange is internally threaded to retain the rigging hose and to make rigging adjustments easy. The back side of the flange is textured to allow inverted mounting. The rigging hose is durable, flexible, and kink resistant and is commonly found on many new boats.
T-H Marine Rfk25Y1Dp Black Rigging Flange Hose And 4' Of 2.5" Black Hose - Rfk25Y1Dp - 232-Rfk25Y1Dpf1
These components provide an excellent system to protect cables and wiring from dirt, abrasion, sun and water. The rigging flange serves to connect the rigging hose from the engine to the boat. The flange is internally threaded to retain the rigging hose and to make rigging adjustments easy. The back side of the flange is textured to allow inverted mounting. The rigging hose is durable, flexible, and kink resistant and is commonly found on many new boats.
T-H Marine Rfk25Y2Dp White Rigging Flange Hose And 4' Of 2.5" White Hose - Rfk25Y2Dp - 232-Rfk25Y2Dpf1
These components provide an excellent system to protect cables and wiring from dirt, abrasion, sun and water. The rigging flange serves to connect the rigging hose from the engine to the boat. The flange is internally threaded to retain the rigging hose and to make rigging adjustments easy. The back side of the flange is textured to allow inverted mounting. The rigging hose is durable, flexible, and kink resistant and is commonly found on many new boats.
T-H Marine Rfk25Y3Dp Grey Rigging Flange Hose And 4' Of 2.5" Grey Hose - Rfk25Y3Dp - 232-Rfk25Y3Dpf1
These components provide an excellent system to protect cables and wiring from dirt, abrasion, sun and water. The rigging flange serves to connect the rigging hose from the engine to the boat. The flange is internally threaded to retain the rigging hose and to make rigging adjustments easy. The back side of the flange is textured to allow inverted mounting. The rigging hose is durable, flexible, and kink resistant and is commonly found on many new boats.
T-H Marine Rfk2Dp White Rigging Flange Hose And 4' Of 2" White Hose - Rfk-2-Dp - 232-Rfk2Dpf1
These components provide an excellent system to protect cables and wiring from dirt, abrasion, sun and water. The rigging flange serves to connect the rigging hose from the engine to the boat. The flange is internally threaded to retain the rigging hose and to make rigging adjustments easy. The back side of the flange is textured to allow inverted mounting. The rigging hose is durable, flexible, and kink resistant and is commonly found on many new boats.
T-H Marine Rigging Flange For 2-1/2" Id Hose, Black - Rf-2.5-1-Dp - 232-Rf251Dpf1
These components provide an excellent system to protect cables and wiring from dirt, abrasion, sun and water. The rigging flange serves to connect the rigging hose from the engine to the boat. The flange is internally threaded to retain the rigging hose and to make rigging adjustments easy. The back side of the flange is textured to allow inverted mounting. The rigging hose is durable, flexible, and kink resistant and is commonly found on many new boats.
T-H Marine Rigging Flange For 2" Id Hose - Rf1Cpdp - 232-Rf1Cpdpf1
These components provide an excellent system to protect cables and wiring from dirt, abrasion, sun and water. The rigging flange serves to connect the rigging hose from the engine to the boat. The flange is internally threaded to retain the rigging hose and to make rigging adjustments easy. The back side of the flange is textured to allow inverted mounting. The rigging hose is durable, flexible, and kink resistant and is commonly found on many new boats.
T-H Marine Rigging Flange For 2" Id Hose - Rf1Dp - 232-Rf1Dpf1
These components provide an excellent system to protect cables and wiring from dirt, abrasion, sun and water. The rigging flange serves to connect the rigging hose from the engine to the boat. The flange is internally threaded to retain the rigging hose and to make rigging adjustments easy. The back side of the flange is textured to allow inverted mounting. The rigging hose is durable, flexible, and kink resistant and is commonly found on many new boats.
T-H Marine Rigging Flange For 2" Id Hose - Rf2Dp - 232-Rf2Dpf1
These components provide an excellent system to protect cables and wiring from dirt, abrasion, sun and water. The rigging flange serves to connect the rigging hose from the engine to the boat. The flange is internally threaded to retain the rigging hose and to make rigging adjustments easy. The back side of the flange is textured to allow inverted mounting. The rigging hose is durable, flexible, and kink resistant and is commonly found on many new boats.
T-H Marine Rigging Flange Hose Union For 2" Hose, Black - Rfhu1Dp - 232-Rfhu1Dpf1
Split design of union allows installation on pre-rigged boats. Fuel hose port fits type A hose. Installs with TH rigging hose.
T-H Marine Rigging Hose 2" X 50' - Rfh1Dp - 232-Rfh1Dpf1
These components provide an excellent system to protect cables and wiring from dirt, abrasion, sun and water. The rigging flange serves to connect the rigging hose from the engine to the boat. The flange is internally threaded to retain the rigging hose and to make rigging adjustments easy. The back side of the flange is textured to allow inverted mounting. The rigging hose is durable, flexible, and kink resistant and is commonly found on many new boats.
