Select Category
Plumbing & Bilge
T-H Marine Rigging Hose 2" X 50' - Rfh2Dp - 232-Rfh2Dpf1
These components provide an excellent system to protect cables and wiring from dirt, abrasion, sun and water. The rigging flange serves to connect the rigging hose from the engine to the boat. The flange is internally threaded to retain the rigging hose and to make rigging adjustments easy. The back side of the flange is textured to allow inverted mounting. The rigging hose is durable, flexible, and kink resistant and is commonly found on many new boats.
T-H Marine Rigging Hose 2" X 50' - Rfh3Dp - 232-Rfh3Dpf1
These components provide an excellent system to protect cables and wiring from dirt, abrasion, sun and water. The rigging flange serves to connect the rigging hose from the engine to the boat. The flange is internally threaded to retain the rigging hose and to make rigging adjustments easy. The back side of the flange is textured to allow inverted mounting. The rigging hose is durable, flexible, and kink resistant and is commonly found on many new boats.
T-H Marine Stainless Steel Cup Holder - Lch1Ssdp - 232-Lch1Ssdpf1
Top quality stainless steel. Fits most existing cup holes. Drain fits 3/8" hose.
T-H Marine Straight Extra Long Thru-Hull Fitting For Hose, White - Th1202Xldp - 232-Th1202Xldpf1
High Quality UV and Chemical Resistant Virgin PolyproSized to Fit All Marine Hose
T-H Marine Straight Extra Long Thru-Hull Fitting For Hose, White - Th752Xldp - 232-Th752Xldpf1
High Quality UV and Chemical Resistant Virgin PolyproSized to Fit All Marine Hose
T-H Marine Straight Thru-Hull Fitting For Hose, White - Th1202Dp - 232-Th1202Dpf1
High Quality UV and Chemical Resistant Virgin PolyproSized to Fit All Marine Hose
T-H Marine Straight Thru-Hull Fitting For Hose, White - Th1502Dp - 232-Th1502Dpf1
High Quality UV and Chemical Resistant Virgin PolyproSized to Fit All Marine Hose
Taco Metals F160861Pol1 Stainless Steel Muti Purpose 15° Portable Cleat - F16-0861Pol-1 - 236-F160861Pol1F1
TACO Marine's multipurpose cleat allows a boater the ease of an instant cleat in the location of a rod holder but also allows the boater to add a boat fender to the same cleat as well as many other uses. Not intended for permanent docking and is Intended for open bottom gunnel rod holders Manufactured from Stainless Steel Type-304Large S-shape 9" cleat designAccommodates up to 3/4" dock line for larger boat applications1-1/2" Diameter pipe fits into standard 1-5/8" rod holdersLoop hole design to hang fenders and allows multiple applicationsIncludes a mesh bag
Taco Rigging Parts, Stainless Steel Eye Straps - F16-1200-2 - 236-F1612002F1
Quality components to upgrade and repair outrigger rigging.
Taco Stainless Steel Overlap, 1/2" X 12' - S11-450Sp12 - 236-S11450Sp12F1
Ideal for larger, heavier boats and yachts. Stainless Steel Type 304Drilled and countersunk on 6" centersChafe protectionSolid backFive year limited warranty
Taylor 11993 Adjustable Tie-Down Strap 6' Long With Stainless Steel Ring On One End And Snap On Other - Black, 2/Pk - 11993 - 32-11993F1
1" Strap fitted with a ring at one end and a snap on the other. Great for securing biminis and awnings.
Taylor 2000 Adjustable Tie-Down Strap 6' Long With Stainless Steel Ring On One End And Snap On Other - White, 2/Pk - 2000 - 32-2000F1
1" Strap fitted with a ring at one end and a snap on the other. Great for securing biminis and awnings.
Taylor 902 Stainless Steel Flag Pole 1" X 18" - 902 - 32-902F1
Stainless steel flag pole is a deluxe flag pole set which features highly polished stainless steel from top to bottom. The staff, finia, base and flag clips are cast 304 stainless steel. The unique flag clips hold your flag taut so it never tangles.
Taylor 903 Stainless Steel Flag Pole 1" X 24" - 903 - 32-903F1
Stainless steel flag pole is a deluxe flag pole set which features highly polished stainless steel from top to bottom. The staff, finia, base and flag clips are cast 304 stainless steel. The unique flag clips hold your flag taut so it never tangles.
Taylor 904 Stainless Steel Flag Pole 1" X 30" - 904 - 32-904F1
Stainless steel flag pole is a deluxe flag pole set which features highly polished stainless steel from top to bottom. The staff, finia, base and flag clips are cast 304 stainless steel. The unique flag clips hold your flag taut so it never tangles.
Taylor 905 Stainless Steel Flag Pole 1" X 36" - 905 - 32-905F1
Stainless steel flag pole is a deluxe flag pole set which features highly polished stainless steel from top to bottom. The staff, finia, base and flag clips are cast 304 stainless steel. The unique flag clips hold your flag taut so it never tangles.
Taylor 967 Stainless Steel Flush Mount Flag Pole Socket Fits 1-1/4" Poles, 60 Degree Angle - 967 - 32-967F1
Made from long lasting T316 polished stainless steel, this mount insets nearly flush to the deck with a 60 degree angle for the staff.
Taylor Anodized Aluminum Windshield Support Bar With Nylon Fittings - 1632 - 32-1632F1
Used as original equipment on many walk-thru windshields. Made from anodized aluminum tubing with nylon fittings. They allow for pivot in almost every direction for easy installation.
Taylor Anodized Aluminum Windshield Support Bar With Nylon Fittings - 1634 - 32-1634F1
Used as original equipment on many walk-thru windshields. Made from anodized aluminum tubing with nylon fittings. They allow for pivot in almost every direction for easy installation.
Taylor Anodized Aluminum Windshield Support Bar With Nylon Fittings - 1636 - 32-1636F1
Used as original equipment on many walk-thru windshields. Made from anodized aluminum tubing with nylon fittings. They allow for pivot in almost every direction for easy installation.
Taylor Anodized Aluminum Windshield Support Bar With Nylon Fittings - 1638 - 32-1638F1
Used as original equipment on many walk-thru windshields. Made from anodized aluminum tubing with nylon fittings. They allow for pivot in almost every direction for easy installation.
Taylor Hand Pump With Hose Adapter - 1005 - 32-1005F1
Compact high pressure hand pump for filling fenders, rafts, etc.
Taylor Quick Disconnect Stainless Steel Pull Pin For Bimini Tops (Sold In Pairs) - 11227 - 32-11227F1
Replaces the screws in Taylor's #1204 deck hinge. Allows fast and easy mounting or removal of a bimini top. Comes complete with safety lanyard to prevent pin loss. Sold in pairs.
Taylor Stainless Steel Baby Snap (2 Per Pack) - 1341 - 32-1341F1
Taylor Stainless Steel Clinching Rings (Pack Of 50) - 1044 - 32-1044F1
Taylor Stainless Steel Clinching Rings. Fits 3/16"-5/16" cord.(Pack of 50)
Taylor Stainless Steel Clinching Rings (Pack Of 50) - 1045 - 32-1045F1
Taylor Stainless Steel Clinching Rings. Fits 3/8"-1/2" cord. (Pack of 50)
Taylor Stainless Steel Dog Snap (2 Per Pack) - 1340 - 32-1340F1
1" stainless steel snap.
Taylor Stainless Steel Fender Lock For Rope Up To 1/2" - 1001 - 32-1001F1
Taylor Made has designed a larger version of it's best selling 1010 fender adjuster. Stainless steel construction, adjustment peg, and fastening screws insure many years of dependable service in the harsh marine environment. The "one-way" locking peg provides secure and reliable mounting and allows the use of up to 1/2" diameter rope.
Taylor Stainless Steel Fender Rack - 2009 - 32-2009F1
A convenient place to stow fenders. Mounts on any rail and stanchion system. Movable J hooks mount on 1" - 1-1/8" rails and stanchion system, tightens to blend with any angle. Cross-reinforced for extra strength. Holds any style fender.Holds "Big B" and "Hull Gard" fenders effectively. Folds flat for easy storage.
Taylor Stainless Steel Fender Rack - 2011 - 32-2011F1
A convenient place to stow fenders. Mounts on any rail and stanchion system. Movable J hooks mount on 1" - 1-1/8" rails and stanchion system, tightens to blend with any angle. Cross-reinforced for extra strength. Holds any style fender.Holds "Big B" and "Hull Gard" fenders effectively. Folds flat for easy storage.
Taylor Stainless Steel Fender Rack - 3011 - 32-3011F1
A convenient place to stow fenders. Mounts on any rail and stanchion system. Movable J hooks mount on 1" - 1-1/8" rails and stanchion system, tightens to blend with any angle. Cross-reinforced for extra strength. Holds any style fender.Holds "Big B" and "Hull Gard" fenders effectively. Folds flat for easy storage.
Taylor Stainless Steel Rail Mount Flag Pole Socket For 1" Diameter Flag Poles - 973 - 32-973F1
Stainless steel mounts will look great and provide years of service. Both models are perpendicular to the rail and are made for 1" diameter flag poles. Round rails only.
Taylor Stainless Steel Rail Mount Flag Pole Socket For 1" Diameter Flag Poles - 974 - 32-974F1
Stainless steel mounts will look great and provide years of service. Both models are perpendicular to the rail and are made for 1" diameter flag poles. Round rails only.
Taylor Stainless Steel Rail Mount Flag Socket Fits 3/4" To 7/8" Poles And Mounts To 7/8" To 1-1/4" Rails - 968 - 32-968F1
Mounts to 7/8" to 1-1/4" round rails only. T304 Stainless Steel. Adjusts to any angle.
Taylor Stainless Steel Top Mount Flag Pole Socket For 1-1/4" Poles, 10 Degree Angle - 966 - 32-966F1
Made from 316 polished stainless steel.
Taylor Stainless Steel Top-Lok For Heavy 1" Round Trim (4 Per Pack) - 1344 - 32-1344F1
Has stud portion affixed. For heavy 1" round trim. Snaps on windshield frame.
Taylor Stainless Steel Top-Lok For Heavy 1" Round Trim (4 Per Pack) - 1348 - 32-1348F1
Has stud portion affixed. For heavy 1" round trim. Snaps on windshield frame.
Taylor Traditional Stainless Steel Fender Lock For Rope Up To 1/4" (One Lock And Peg) - 1010 - 32-1010F1
Low profile stainless steel peg and bases make hanging fenders fast and easy. The peg fits in old style fender lock brackets. Set includes peg, bracket and screws. Rope size up to 1/4".
Tee 3/8" Pexlock Plumbing Fitting - 30815 - 497-30815F1
Includes 2 clamps.
Tee Fitting 1 1/2" X 1 1/8 I - Tee350Dp - 232-Tee350Dpf1
Black.
Tee Fitting 1 1/8" X 3/4 X 1 - Tee250Dp - 232-Tee250Dpf1
Black.
Tee Nut - Stainless 10-24 - Rp-Sc3869 - 50-00634F1
18-8 Stainless Steel.
Tee Nut - Stainless 3/8"-16 - Rp-Sc3873 - 50-00638F1
18-8 Stainless Steel.
Tee Nut - Stainless 5/16"-18 - Rp-Sc3872 - 50-00637F1
18-8 Stainless Steel.
Tee Nut - Stainless1/4"-20 - Rp-Sc3871 - 50-00636F1
18-8 Stainless Steel.
Teknor Apex 8845100 Commercial Duty Neverkink Hose, 5/8" X 100', Black/Red - 8845-100 - 188-8845100F1
Self-straightening hose which eliminates kinks, twists and tangles. Features MicroShield® antimicrobial protection which guards against mold and mildew. Power Coil® collar eliminates kinking and Power Coil® coupling for a maximum fit at the faucet. All weather flexible to 45° F. NOT approved for drinking water. Made in U.S.A.
Teknor Apex 884550 Commercial Duty Neverkink Hose, 5/8" X 50', Black/Red - 8845-50 - 188-884550F1
Self-straightening hose which eliminates kinks, twists and tangles. Features MicroShield® antimicrobial protection which guards against mold and mildew. Power Coil® collar eliminates kinking and Power Coil® coupling for a maximum fit at the faucet. All weather flexible to 45° F. NOT approved for drinking water. Made in U.S.A.
Teknor Apex 884575 Commercial Duty Neverkink Hose, 5/8" X 75', Black/Red - 8845-75 - 188-884575F1
Self-straightening hose which eliminates kinks, twists and tangles. Features MicroShield® antimicrobial protection which guards against mold and mildew. Power Coil® collar eliminates kinking and Power Coil® coupling for a maximum fit at the faucet. All weather flexible to 45° F. NOT approved for drinking water. Made in U.S.A.
Tempress 71465 Fish-On Rail Adapter Kit - 71465 - 107-71465F1
71460: The Fish-On!® side mount allows additional mounts to be installed wherever necessary. Standard 12 position mount installs with (4) self tapping screws to any flat vertical surface, or to a 7/8" or 1" rail with the optional rail mount adapter.71465: Rail adaptor kit works with the side mount to allow you to mount on any 7/8" or 1" rail. Includes all necessary hardware for mounting.
Tethered 1/4" Spring-Loaded Clevis Pin, Stainless Steel - 66202-3 - 23-662023F1
Stainless steel clevis pin comes w/nylon covered stainless steel lanyard. For use with deck or rail mounted bimini top hinge fittings that use removable 1/4" spring-loaded clevis pins.
Th Marine Th752B Thru Hull 3/4 Bulk Straight White - Th752B - 232-Th752Bf1
High Quality UV and Chemical Resistant Virgin Polypro Sized to Fit All Marine Hose
The Big D Troling Motor Handle Large Soft Comfort Grips Stainless Steel Cable - 315-200000 - 651-315200000F1
Thru Hull 1-1/2" 90D Hose White - Th1592Dp - 232-Th1592Dpf1
High quality UV and chemical resistant virgin polypropelene. Features a finished head and a single pass around nut.
Thru Hull 1-1/2" Long - Th1502Xldp - 232-Th1502Xldpf1
High Quality UV and Chemical Resistant Virgin PolyproSized to Fit All Marine Hose
Thru Hull 2" Ss W/Hose End - 70Thh200 - 379-70Thh200F1
316 Stainless steel.
Thru Hull 3/4 Straight Black - Th750Dp - 232-Th750Dpf1
High Quality UV and Chemical Resistant Virgin PolyproSized to Fit All Marine Hose
Thru Hull 3/4 Straight White - Th752Dp - 232-Th752Dpf1
High Quality UV and Chemical Resistant Virgin PolyproSized to Fit All Marine Hose
Thru Hull 5/8" - Th652Dp - 232-Th652Dpf1
High Quality UV and Chemical Resistant Virgin PolyproSized to Fit All Marine Hose
Thru Hull-1-1/2 - 520790 - 354-520790F1
These Thru-Hulls are ideal for salt water use because they are impervious to electrolysis and corrosion. For use with hose to allow water to pass in or out of a vessel. Designed for drainage above the water line. Constructed of injection molded polypropylene.
Thru Hull-1-1/8 - 520770 - 354-520770F1
These Thru-Hulls are ideal for salt water use because they are impervious to electrolysis and corrosion. For use with hose to allow water to pass in or out of a vessel. Designed for drainage above the water line. Constructed of injection molded polypropylene.
Thru-Hull 1-1/2" Plastic - 0301Dp8 - 9-0301Dp8F1
Molded white plastic with narrow flange. For use with hose.
Thru-Hull Fitting 1 1/2" -- - 520790-1 - 354-5207901F1
These Thru-Hulls are ideal for salt water use because they are impervious to electrolysis and corrosion. For use with hose to allow water to pass in or out of a vessel. Designed for drainage above the water line. Constructed of injection molded polypropylene.
Thru-Hull Fitting 1 1/8" -- - 520770-1 - 354-5207701F1
These Thru-Hulls are ideal for salt water use because they are impervious to electrolysis and corrosion. For use with hose to allow water to pass in or out of a vessel. Designed for drainage above the water line. Constructed of injection molded polypropylene.
Thru-Hull Fitting 3/4" - 520750-1 - 354-5207501F1
These Thru-Hulls are ideal for salt water use because they are impervious to electrolysis and corrosion. For use with hose to allow water to pass in or out of a vessel. Designed for drainage above the water line. Constructed of injection molded polypropylene.
Thru-Hull Fitting 5/8" -- - 520740-1 - 354-5207401F1
These Thru-Hulls are ideal for salt water use because they are impervious to electrolysis and corrosion. For use with hose to allow water to pass in or out of a vessel. Designed for drainage above the water line. Constructed of injection molded polypropylene.
Thru-Hull W/Scupper - 520510-1 - 354-5205101F1
This Thru-Hull with Scupper Valve mounts through the transom and provides a water exit for boats with self-bailing cockpits. Ideal for above the water line drainage. Valve features a soft black flapper. For use with 1-1/2" hose. Compatible with most self-bailing applications. Constructed of injection molded acetal. Installs with four #6 FH fasteners (not included).
Thru-Hull-3/4 - 520750 - 354-520750F1
These Thru-Hulls are ideal for salt water use because they are impervious to electrolysis and corrosion. For use with hose to allow water to pass in or out of a vessel. Designed for drainage above the water line. Constructed of injection molded polypropylene.
Thru-Hull-5/8 - 520740 - 354-520740F1
These Thru-Hulls are ideal for salt water use because they are impervious to electrolysis and corrosion. For use with hose to allow water to pass in or out of a vessel. Designed for drainage above the water line. Constructed of injection molded polypropylene.
Tie Down Engineering 86580 Round Single Fender, Steel - 86580 - 241-86580F1
Heavy duty stamped fenders can be drilled to fit a variety of mounting options. Mounting hardware not included.
Tie Down Engineering 86581 Teardrop Fender, Steel - 86581 - 241-86581F1
Heavy duty stamped fenders can be drilled to fit a variety of mounting options. Mounting hardware not included.
Tie Down Engineering Dock Hardware - 14" Steel Hoop Roller Pile Holder, Commercial Grade - 26423 - 241-26423F1
14" Commercial grade steel. The piling hoop secures around the piling, while roller permits smooth up and down movement.
Tie Down Engineering Dock Hardware - Galvanized Steel Piling Hoop, Commercial Grade - 26391 - 241-26391F1
Commercial Grade w/5" radius for 10" Piles. Heavy duty 1/4" galvanized steel. 3" high. Can bolt to the dock directly or to an optional deck plate (26416). Size: 16" x 3".
Tie Down Engineering Dock Hardware - Galvanized Steel Piling Hoop, Commercial Grade - 26393 - 241-26393F1
Commercial Grade w/7" radius for 14" Piles. Heavy duty 1/4" galvanized steel. 3" high. Can bolt to the dock directly or to an optional deck plate (26416). Size: 20" x 3".
Tie Down Engineering Dock Hardware - Galvanized Steel Piling Hoop, Commercial Grade - 26394 - 241-26394F1
Commercial Grade w/6" radius for12 Piles. Heavy duty 1/4" galvanized steel. 3" high. Can bolt to the dock directly or to an optional deck plate (26416). Size: 18" x 3".
Tie Down Engineering Dock Hardware - Galvanized Steel Piling Hoop, Commercial Grade - 26429 - 241-26429F1
Commercial Grade w/4" radius for 8" Piles. Heavy duty 1/4" galvanized steel. 3" high. Can bolt to the dock directly or to an optional deck plate (26416). Size: 14" x 3".
Tie Down Engineering Dock Hardware - Steel Chain Pile Holder, Commercial Grade - 26419 - 241-26419F1
For use as a pile holder with 3/8" galvanized chain and shackles. Can be adjusted for various pile diameters. Size: 20-1/4" x 4-1/4" x 4-1/4" x 1/4" Steel.
Tie Down Engineering Galvanized Steel 7 X 19 Winch Cable With Galvanized Latch Hook - 59379 - 241-59379F1
Made of galvanized steel 7 x 19 aircraft cable to handle heavy loads. Each cable is fitted with a heavy-duty galvanized latch hook, pull proof loop and a fastener end for replacement use on Powerwinch and other power electric winches.
Tie Down Engineering Galvanized Steel 7 X 19 Winch Cable With Galvanized Latch Hook - 59380 - 241-59380F1
Made of galvanized steel 7 x 19 aircraft cable to handle heavy loads. Each cable is fitted with a heavy-duty galvanized latch hook, pull proof loop and a fastener end for replacement use on Powerwinch and other power electric winches.
Tie Down Engineering Galvanized Steel 7 X 19 Winch Cable With Galvanized Latch Hook - 59385 - 241-59385F1
Made of galvanized steel 7 x 19 aircraft cable to handle heavy loads. Each cable is fitted with a heavy-duty galvanized latch hook, pull proof loop and a fastener end for replacement use on Powerwinch and other power electric winches.
Tie Down Engineering Galvanized Steel 7 X 19 Winch Cable With Galvanized Latch Hook - 59390 - 241-59390F1
Made of galvanized steel 7 x 19 aircraft cable to handle heavy loads. Each cable is fitted with a heavy-duty galvanized latch hook, pull proof loop and a fastener end for replacement use on Powerwinch and other power electric winches.
Tie Down Engineering Galvanized Steel 7 X 19 Winch Cable With Galvanized Latch Hook - 59395 - 241-59395F1
Made of galvanized steel 7 x 19 aircraft cable to handle heavy loads. Each cable is fitted with a heavy-duty galvanized latch hook, pull proof loop and a fastener end for replacement use on Powerwinch and other power electric winches.
Tie Down Engineering Galvanized Steel 7 X 19 Winch Cable With Galvanized Latch Hook - 59400 - 241-59400F1
Made of galvanized steel 7 x 19 aircraft cable to handle heavy loads. Each cable is fitted with a heavy-duty galvanized latch hook, pull proof loop and a fastener end for replacement use on Powerwinch and other power electric winches.
Tie Down Engineering Hot Dipped Galvanized Steel Bunk Bracket - 81225 - 241-81225F1
Heavy 11 gauge hot dipped galvanized steel brackets mount 2" bunks on edge. Slotted for vertical adjustment to standard or deep-V hulls.
Tie Down Engineering Hot Dipped Galvanized Steel Bunk Bracket - 81230 - 241-81230F1
Heavy 11 gauge hot dipped galvanized steel brackets mount 2" bunks on edge. Slotted for vertical adjustment to standard or deep-V hulls.
Tie Down Engineering Hot Dipped Galvanized Steel Bunk Bracket - 86149 - 241-86149F1
Heavy 11 gauge hot dipped galvanized steel brackets mount 2" bunks on edge. Slotted for vertical adjustment to standard or deep-V hulls.
Tigress 1000Cs Stainless Steel Cap. - 1000Cs - 397-1000Csf1
Fits all round plastic rod holder cupholders.
Tigress 88586 Weld-On Large Stainless Steel Cup Insert - 88586 - 397-88586F1
Fits 20oz and 30oz Tumblers. Designed to be welded on to aluminum towers.
Tiller Rope Clamp - 28601 - 50-28601F1
For use with 1/8" or 3/16" rope. Chrome plated zinc. Dimensions: 1-1/4" x 11/16".
Tiller Rope Clamps - 1226Dp0Chr - 9-1226Dp0Chrf1
For 1/8" or 3/16" rope. The width is 11/16". Overall length is 1-1/4".
Todd Deluxe Swingback Cooler / Livewell Seat - 1792-18U - 100-179218Uf1
These durable seats feature stainless steel swing-arms, and plush, ribbed marine grade vinyl upholstery. The cooler/livewell features a hinged lid with a recessed rubberized gasket for a tight seal, a drain fitting, polyethylene mounting plates, a double wall foamed insulated interior, and rounded interior corners (to prevent bait from getting trapped).
Top Strainer With Non-Return - Sb5865 - 698-Sb5865F1
Mount in the lowest part of bilge to secure the intake line. Strainers are valuable in minimizing intake of debris. Supplied with non-return valves.
Tow-Ready 7-Way Flat Pin To 5-Flat Adapter - 118703 - 220-118703F1
Allows convenient connection to multiple trailers. Simple plug-in installation.
Trac 600 Gph Bilge Pump - 69300 - 452-69300F1
Cartridge-style pump head. Pump body accepts 3/4" screw-on outlets to allow ease of installation. Use the 3/4" outlet for 800 GPH or the 1-1/8" outlet for 1100 GPH flow rates. Universal strainer base is connection-compatible with Attwood Tsunami, Rule and Johnson/Mayfair cartridge pumps. Screw mounting holes match Rule and Attwood Tsunami pump bases. Ignition protection and low power draw. Runs dry without damage. Meets ABYC, Coast Guard and ISO marine standards.
Trac Ecological Flushcap® For Groco Arg Strainers - 1285-A - 202-1285Af1
Available in three sizes to fit any GROCO ARG Strainer, FLUSHcap® makes flushing your raw water cooled equipment a snap. Temporarily replacing your existing strainer cap with a FLUSHcap® will allow you to easily connect a Port-O-Flush Jr.® or garden hose to your system. Use FLUSHcap® to flush your raw water cooled equipment with Barnacle Buster®, fresh water, or to aid in winterizing your system.NOTE: Not intended to replace your existing strainer cap, for flushing use only.
Trac Ecological Flushcap® For Groco Arg Strainers - 8214017 - 202-1285Bf1
Available in three sizes to fit any GROCO ARG Strainer, FLUSHcap® makes flushing your raw water cooled equipment a snap. Temporarily replacing your existing strainer cap with a FLUSHcap® will allow you to easily connect a Port-O-Flush Jr.® or garden hose to your system. Use FLUSHcap® to flush your raw water cooled equipment with Barnacle Buster®, fresh water, or to aid in winterizing your system.NOTE: Not intended to replace your existing strainer cap, for flushing use only.
Trac Ecological Flushcap® For Groco Arg Strainers - 8215015 - 202-1285Cf1
Available in three sizes to fit any GROCO ARG Strainer, FLUSHcap® makes flushing your raw water cooled equipment a snap. Temporarily replacing your existing strainer cap with a FLUSHcap® will allow you to easily connect a Port-O-Flush Jr.® or garden hose to your system. Use FLUSHcap® to flush your raw water cooled equipment with Barnacle Buster®, fresh water, or to aid in winterizing your system.NOTE: Not intended to replace your existing strainer cap, for flushing use only.
Transom Exhaust Ss W/3" Hose - 70Te300 - 379-70Te300F1
This series of stainless steel transom exhausts has an angled flange and comes complete with countersunk base holes machined in the flange.
Transom Exhaust Ss W/4" Hose - 70Te400 - 379-70Te400F1
This series of stainless steal transom exhausts has an angled flange and comes complete with countersunk base holes machined in the flange.
