Thru-Hulls & Seacocks
1" Bronze Seacock W/90° Tail Piece - 0834006Plb - 9-0834006Plbf1
Includes: thru-hull, hose adapter, drain plug, four pre-drilled mounting holes and bonding screw. Incorporates a plastic ball and seat assuring a tight seal and ease of operation and drain plugs for winterizing. Handles are easily removed. Overall height is measured from the top of the hose adapter to the bottom of the flange. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1" Bronze Seacock Body - 0805006Plb - 9-0805006Plbf1
Ball valve design. Cast bronze. Meets needs of applications that require long, scoop or flush type thru-hulls.
1" Bronze Intake Strainer - 00Is100 - 379-00Is100F1
Cast bronze w/nut.
1-1/8" White Plastic Thru-Hull W/Broad Flange - 18090 - 50-18090F1
Molded plastic with broad flange. Per ABYC "Safety Standards for Small Craft". Not recommended for use below the waterline.
1-1/8 Thru Hull Connect Bulk - 0328Dp6A - 9-0328Dp6Af1
Molded white plastic with broad flange. For use with hose. Not recommended for use below waterline.
1-1/8 Ql Elbow Thru-Hull Blk 15/08 - Ma-042-Qlb - 81-Ma042Qlbf1
1-1/8 Chr Thru-Hull F/Hose - 035006Adpc - 9-035006Adpcf1
Available in plain or chrome plated bronze, these fittings have a hose barb connection and are recommended for use above the waterline only. The flange is machined to fit the hull tightly and grooved to retain bedding compound. Minimum hull thickness 3/8".
1-1/4"Bronze Seacock W/Straight Tail Piece - 0835007Plb - 9-0835007Plbf1
Includes: thru-hull, hose adapter, drain plug, four pre-drilled mounting holes and bonding screw. Incorporates a plastic ball and seat assuring a tight seal and ease of operation and drain plugs for winterizing. Handles are easily removed. Overall height is measured from the top of the hose adapter to the bottom of the flange.
1-1/4" Thru-Hull With Nut - Th-125-W - 34-Th125Wf1
Should have threaded portion cut to proper length considering hull and butt block thickness. Consider thread depth when using a seacock. Sealant is recommended between hull and thru-hull flange. Includes nut.NOT TO BE USED IN POTABLE WATER SYSTEMS.
1-1/4" Strainer 304 Ss Basket - Arg-1250-S Bspp - 34-Arg1250Sbsppf1
Standard single strainers. No tie rods or leaks under pressure or vacuum. Quick and easy mounting system allowing removal of strainer without tools. #304 Stainless steel filter basket. O-ring seals at strainer cap and between strainer head and sight glass. See-thru screw-on strainer cap allows easy, no-tools maintenance. Spanner wrench holes in cover allow the use of SW-2531 wrench. Install with pipe or hose. Do not use chemical or abrasive cleaners on sight glass. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1-1/4" Scoop Thru Hull W/Nut - 0065Dp7Plb - 9-0065Dp7Plbf1
Cast bronze. Screw size is #8. Strainer is 3" x 4", except for 65DP7PLB which is 3-1/4" x 4-1/4". Includes nut. UL Listed. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1-1/4" Intake Water Strainer - 0493007Plb - 9-0493007Plbf1
Cast bronze. Designed for easy installation and cleaning. Features mounting lugs cast into both sides to assure universal mounting, four outside tie rods and a 316 stainless steel strainer basket to minimize electrolysis. Hinged lugs for cast bronze cover permit easy removal and cleaning of basket. Drain plug in bottom casting is provided for easy removal of sediment and draining for winterization. Ratio given for open area to pipe size.
1-1/4" Bronze Seacock W/90° Tail Piece - 0834007Plb - 9-0834007Plbf1
Includes: thru-hull, hose adapter, drain plug, four pre-drilled mounting holes and bonding screw. Incorporates a plastic ball and seat assuring a tight seal and ease of operation and drain plugs for winterizing. Handles are easily removed. Overall height is measured from the top of the hose adapter to the bottom of the flange.
1-1/4" Bronze Seacock Body - 0805007Plb - 9-0805007Plbf1
Ball valve design. Cast bronze. Meets needs of applications that require long, scoop or flush type thru-hulls.
1-1/4" Bronze Intake Strainer - 00Is125 - 379-00Is125F1
Cast bronze w/nut.
1-1/4 Slot Hi Spd Thru Hul Brz Bronze Thru Hull - Hsslth-1250-W - 34-Hsslth1250Wf1
1-1/2" Thru-Hull With Nut - Th-150-W - 34-Th150Wf1
Should have threaded portion cut to proper length considering hull and butt block thickness. Consider thread depth when using a seacock. Sealant is recommended between hull and thru-hull flange. Includes nut.NOT TO BE USED IN POTABLE WATER SYSTEMS.
1-1/2" Scoop Thru-Hull W/Nut - Sth-150-W - 34-Sth150Wf1
Includes locking nut. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1-1/2" Intake Water Strainer - 0493008Plb - 9-0493008Plbf1
Cast bronze. Designed for easy installation and cleaning. Features mounting lugs cast into both sides to assure universal mounting, four outside tie rods and a 316 stainless steel strainer basket to minimize electrolysis. Hinged lugs for cast bronze cover permit easy removal and cleaning of basket. Drain plug in bottom casting is provided for easy removal of sediment and draining for winterization. Ratio given for open area to pipe size.
1-1/2" Bronze Seacock W/Straight Tail Piece - 0835008Plb - 9-0835008Plbf1
Includes: thru-hull, hose adapter, drain plug, four pre-drilled mounting holes and bonding screw. Incorporates a plastic ball and seat assuring a tight seal and ease of operation and drain plugs for winterizing. Handles are easily removed. Overall height is measured from the top of the hose adapter to the bottom of the flange.
1-1/2" Bronze Seacock W/90° Tail Piece - 0834008Plb - 9-0834008Plbf1
Includes: thru-hull, hose adapter, drain plug, four pre-drilled mounting holes and bonding screw. Incorporates a plastic ball and seat assuring a tight seal and ease of operation and drain plugs for winterizing. Handles are easily removed. Overall height is measured from the top of the hose adapter to the bottom of the flange.
1-1/2" Bronze Seacock Body - 0805008Plb - 9-0805008Plbf1
Ball valve design. Cast bronze. Meets needs of applications that require long, scoop or flush type thru-hulls.
1-1/2" Bronze Intake Strainer - 00Is150 - 379-00Is150F1
Cast bronze w/nut.
1-1/2 X-Long Thru Hull-White - Th1502Xlb - 232-Th1502Xlbf1
High Quality UV and Chemical Resistant Virgin PolyproSized to Fit All Marine Hose
1-1/2 Thru Hull Connection C - 0350008Dpc - 9-0350008Dpcf1
Available in plain or chrome plated bronze, these fittings have a hose barb connection and are recommended for use above the waterline only. The flange is machined to fit the hull tightly and grooved to retain bedding compound. Minimum hull thickness 3/8".
1-1/2 Thru Hull Connection - 0328Dp8 - 9-0328Dp8F1
Molded white plastic with broad flange. For use with hose. Not recommended for use below waterline.
1-1/2 Slot Thru Hull Brz Bronze Thru Hull - Hsslth-1500-W - 34-Hsslth1500Wf1
1 Thru Hull Connection Plb - 0350006Dpp - 9-0350006Dppf1
Available in plain or chrome plated bronze, these fittings have a hose barb connection and are recommended for use above the waterline only. The flange is machined to fit the hull tightly and grooved to retain bedding compound. Minimum hull thickness 3/8".
1 Thru Hull Connection Chr - 0350006Dpc - 9-0350006Dpcf1
Available in plain or chrome plated bronze, these fittings have a hose barb connection and are recommended for use above the waterline only. The flange is machined to fit the hull tightly and grooved to retain bedding compound. Minimum hull thickness 3/8".
1 Thru Hull Connection Bulk - 0328Dp6 - 9-0328Dp6F1
Molded white plastic with broad flange. For use with hose. Not recommended for use below waterline.
1 Slot Hi Speed Thru Hull Brz Bronze Thru Hull - Hsslth-1000-W - 34-Hsslth1000Wf1
1 1/2 Thru Hull Connection - 0350008Dpp - 9-0350008Dppf1
Available in plain or chrome plated bronze, these fittings have a hose barb connection and are recommended for use above the waterline only. The flange is machined to fit the hull tightly and grooved to retain bedding compound. Minimum hull thickness 3/8". NOT TO BE USED IN POTABLE WATER SYSTEMS.
