Select Category
Plumbing & Bilge
#316 Ss In-Line Valve, 3/8 Ball Valve - Ibv-375-S - 34-Ibv375Sf1
00235 Ironwood Pacific Anchor Ring Anchor Puller, Heavy Duty, 5/16" Stainless Steel Ring - 235 - 664-00235F1
Float your anchor to the surface using the AnchorLift Anchor Ring. Ideal for offshore or bay anchoring where 15 feet or more of anchor chain is used. Stainless steel ring and shackleWill float anchors up to 80 lbs (with buoy)Quickly clips to anchor lineOffered in standard and heavy duty modelsLifetime warranty
1 1/2 Id Cor Hardwall 12.5' Wet Exhaust/Water Hose, Black 250 F, Sae J2006-R2, Lloyd'S - 252-1124 - 606-2521124F1
1 1/2 Pipe To Hose Adapter - 0076Dp8Plb - 9-0076Dp8Plbf1
Cast bronze. Meets requirements of USCG safety standards.
1 1/2 Thru Hull Connection - 0350008Dpp - 9-0350008Dppf1
Available in plain or chrome plated bronze, these fittings have a hose barb connection and are recommended for use above the waterline only. The flange is machined to fit the hull tightly and grooved to retain bedding compound. Minimum hull thickness 3/8". NOT TO BE USED IN POTABLE WATER SYSTEMS.
1 1/4 Clear Bilge Bx 50' Bilge/Livewell Fda Clear W/ Plastic Helix - 147-1146 - 606-1471146F1
1 1/4 Pipe To Hose Adapter - 0076Dp7Plb - 9-0076Dp7Plbf1
Cast bronze. Meets requirements of USCG safety standards.
1 1/4 Xhd Bilge Bx 50' Live Well Hose, Pvc, Black, Plasticizer Wall, Flexible - 149-1146 - 606-1491146F1
1 1/8 Hose Adapter - 905016 - 108-905016F1
Made from high-strength, glass-reinforced Marelon. Perfect choice for joining hose lines to ball valves and seacocks.
1 3/4 Id Cor Hardwall 50' Wet Exhaust/Water Hose, Black 250 F, Sae J2006-R2, Lloyd'S - 252-1346 - 606-2521346F1
1 3/4 Id Softwall 12.5' Wet Exhaust/Water Hose, Black 250 F, Sae J2006-R2, Lloyd'S - 200-1344 - 606-2001344F1
1 5/8 Id Cor Hardwall 50' Wet Exhaust/Water Hose, Black 250 F, Sae J2006-R2, Lloyd'S - 252-1586 - 606-2521586F1
1 7/8 Id Hardwall 50' Wet Exhaust/Water Hose, Black 250 F, Sae J2006-R2, Lloyd'S - 250-1786 - 606-2501786F1
1 90 Deg Pipe To Hose Adapte - 0063Dp6Plb - 9-0063Dp6Plbf1
Cast bronze. Meets requirements of USCG safety standards.
1 90 Deg Pipe To Hose Adapter - 0063009Plb - 9-0063009Plbf1
Cast bronze. Meets requirements of USCG safety standards.
1 Bronze 90 Deg Street Ell - 44165 - 38-44165F1
Bronze 90°, male/female threads. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1 Bronze Pipe Cap - 44475 - 38-44475F1
Bronze NOT TO BE USED IN POTABLE WATER SYSTEMS.
1 Bronze Pipe Coupling - 44415 - 38-44415F1
Bronze and imported. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1 Bronze Pipe Tee - 44255 - 38-44255F1
Bronze and imported. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1 Id 150Psi Wtr Hose Bx 50' Water Hose, Black 2 Spiral Polyester Reinforced - 132-1006 - 606-1321006F1
1 Id Clear Cor Bilge Bx 50' Live Well Hose, Fda Corrugated, Clear Black Helix - 144-1006 - 606-1441006F1
1 Id Red Pvc Fda Wtr Bx 50' Red Reinforced Pvc Tubing Operating Temp 20 F To 150 F - 166-1006 - 606-1661006F1
1 Pipe To Hose Adapter - 0076Dp6Plb - 9-0076Dp6Plbf1
Cast bronze. Meets requirements of USCG safety standards.
1 Slot Hi Speed Thru Hull Brz Bronze Thru Hull - Hsslth-1000-W - 34-Hsslth1000Wf1
1 Thru Hull Connection Bulk - 0328Dp6 - 9-0328Dp6F1
Molded white plastic with broad flange. For use with hose. Not recommended for use below waterline.
1 Thru Hull Connection Chr - 0350006Dpc - 9-0350006Dpcf1
Available in plain or chrome plated bronze, these fittings have a hose barb connection and are recommended for use above the waterline only. The flange is machined to fit the hull tightly and grooved to retain bedding compound. Minimum hull thickness 3/8".
1 Thru Hull Connection Plb - 0350006Dpp - 9-0350006Dppf1
Available in plain or chrome plated bronze, these fittings have a hose barb connection and are recommended for use above the waterline only. The flange is machined to fit the hull tightly and grooved to retain bedding compound. Minimum hull thickness 3/8".
1 X 1/2 Bronze Hex Bushing - 44512 - 38-44512F1
Bronze hex head. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1 X 3 1/2 Brass Pipe Nipple - 40-104 - 38-40104F1
Nipple Brass 1 X 3 1/2 NOT TO BE USED IN POTABLE WATER SYSTEMS.
1 X 3/4 Bronze Hex Bushing - 44513 - 38-44513F1
Bronze hex head. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1 X 3/8 Bronze Hex Bushing - 44511 - 38-44511F1
Bronze hex head. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1 Xhd Bilge Bx 50' Live Well Hose, Pvc, Black, Plasticizer Wall, Flexible - 149-1006 - 606-1491006F1
1-1/2 90 Deg Pipe/Hose Adapte - 0063Dp8Plb - 9-0063Dp8Plbf1
Cast bronze. Meets requirements of USCG safety standards.
1-1/2 Bronze 90 Deg Street Ell - 44167 - 38-44167F1
Bronze 90°, male/female threads. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1-1/2 Bronze Pipe Cap - 44477 - 38-44477F1
Bronze NOT TO BE USED IN POTABLE WATER SYSTEMS.
1-1/2 Bronze Pipe Coupling - 44417 - 38-44417F1
Bronze and imported. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1-1/2 Bronze Pipe Tee - 44257 - 38-44257F1
Bronze and imported. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1-1/2 Brz Floor Flange Red Brass - 44-696 - 38-44696F1
1-1/2 R.H. Vac Cuff - 16-147-1120 - 88-1471120F1
Provides added clamping protection for Shields vac hose. For watertight seal apply with sealing compound. SHI 1471120 is heavy-duty.
1-1/2 Sani Hose Black Rubber - 1011124 - 606-1011124F1
For all head and holding tank connections. Extra thick tube and cover especially compounded for maximum resistance to odor permeation and winterizing with antifreeze. Helical wire between 2 ply reinforcement provides excellent flexibility and bend radius. NOT FOR POTABLE WATER. 5 Year Warranty.
1-1/2 Sani Hose Blk Rubber Box - 101-1124-1B - 606-10111241Bf1
1-1/2 Sani Hose White Rubber - 1021124 - 606-1021124F1
For all head and holding tank connections. Extra thick tube and cover especially compounded for maximum resistance to odor permeation and winterizing with antifreeze. Helical wire between 2 ply reinforcement provides excellent flexibility and bend radius. NOT FOR POTABLE WATER. 5 Year Warranty.
1-1/2 Slot Thru Hull Brz Bronze Thru Hull - Hsslth-1500-W - 34-Hsslth1500Wf1
1-1/2 Thru Hull Connection - 0328Dp8 - 9-0328Dp8F1
Molded white plastic with broad flange. For use with hose. Not recommended for use below waterline.
1-1/2 Thru Hull Connection C - 0350008Dpc - 9-0350008Dpcf1
Available in plain or chrome plated bronze, these fittings have a hose barb connection and are recommended for use above the waterline only. The flange is machined to fit the hull tightly and grooved to retain bedding compound. Minimum hull thickness 3/8".
1-1/2 X 1 Bronze Hex Bushing - 44523 - 38-44523F1
Bronze hex head. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1-1/2 X 1-1/4 Bronze Hex Bushing - 44524 - 38-44524F1
Bronze hex head. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1-1/2 X 3-1/2 Brass Pipe Nipple - 40144 - 38-40144F1
1-1/2 X 3-1/2 Brass Pipe Nipple NOT TO BE USED IN POTABLE WATER SYSTEMS.
1-1/2 X 3/4 Bronze Hex Bushing - 44522 - 38-44522F1
Bronze hex head. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1-1/2 X-Long Thru Hull-White - Th1502Xlb - 232-Th1502Xlbf1
High Quality UV and Chemical Resistant Virgin PolyproSized to Fit All Marine Hose
1-1/2" 3-Way Bronze Diverter Valve - 70-607-10 - 37-7060710F1
Features a chrome plated ball, reinforced TFE seats, stuffing box ring, and adjustable packing gland. Made in U.S.A. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1-1/2" Ball Valve W/ Ss Lever - 70-107-10 - 37-7010710F1
Cast bronze with a stainless steel handle and stem nut. Ball is chrome plated for long lasting corrosion resistance. Reinforced TFE seats and stuffing box ring.Made in U.S.A. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1-1/2" Bronze 45 Degree St Elbow - 44207 - 38-44207F1
1-1/2" Bronze 45 Degree St Elbow NOT TO BE USED IN POTABLE WATER SYSTEMS.
1-1/2" Bronze Intake Strainer - 00Is150 - 379-00Is150F1
Cast bronze w/nut.
1-1/2" Bronze Seacock Body - 0805008Plb - 9-0805008Plbf1
Ball valve design. Cast bronze. Meets needs of applications that require long, scoop or flush type thru-hulls.
1-1/2" Bronze Seacock W/90° Tail Piece - 0834008Plb - 9-0834008Plbf1
Includes: thru-hull, hose adapter, drain plug, four pre-drilled mounting holes and bonding screw. Incorporates a plastic ball and seat assuring a tight seal and ease of operation and drain plugs for winterizing. Handles are easily removed. Overall height is measured from the top of the hose adapter to the bottom of the flange.
1-1/2" Bronze Seacock W/Straight Tail Piece - 0835008Plb - 9-0835008Plbf1
Includes: thru-hull, hose adapter, drain plug, four pre-drilled mounting holes and bonding screw. Incorporates a plastic ball and seat assuring a tight seal and ease of operation and drain plugs for winterizing. Handles are easily removed. Overall height is measured from the top of the hose adapter to the bottom of the flange.
1-1/2" Intake Water Strainer - 0493008Plb - 9-0493008Plbf1
Cast bronze. Designed for easy installation and cleaning. Features mounting lugs cast into both sides to assure universal mounting, four outside tie rods and a 316 stainless steel strainer basket to minimize electrolysis. Hinged lugs for cast bronze cover permit easy removal and cleaning of basket. Drain plug in bottom casting is provided for easy removal of sediment and draining for winterization. Ratio given for open area to pipe size.
1-1/2" Scoop Thru-Hull W/Nut - Sth-150-W - 34-Sth150Wf1
Includes locking nut. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1-1/2" Shut-Off Full Flow Ball Valve - 77-107-10 - 37-7710710F1
Comes with mounting pads. Use where full flow is required. Bronze body. Chromium plated ball. Reinforced TFE seats & stuffing box ring. Blow out stem design. Stainless steel lever and nut. Meets WW-V-35C Type II. BRZ style type. Made in U.S.A. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1-1/2" Thru-Hull With Nut - Th-150-W - 34-Th150Wf1
Should have threaded portion cut to proper length considering hull and butt block thickness. Consider thread depth when using a seacock. Sealant is recommended between hull and thru-hull flange. Includes nut.NOT TO BE USED IN POTABLE WATER SYSTEMS.
1-1/2" Y Valve - 45490-1000 - 6-454901000F1
Designed for installation in waste discharge and bilge pumpout systems. Allows waste to be pumped directly into holding tank or diverted to an overboard discharge fitting. Empty two separate bilge sections with a single pump. All ABS and stainless steel construction. Withstands corrosive waste chemicals and bilge water.
1-1/2X1-1/4 Bronze Reduce Couplng - 44450 - 38-44450F1
Bronze and imported. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1-1/4 90 Deg Pipe/Hose Adapte - 0063Dp7Plb - 9-0063Dp7Plbf1
Cast bronze. Meets requirements of USCG safety standards.
1-1/4 Bronze 90 Deg Street Ell - 44166 - 38-44166F1
Bronze 90°, male/female threads. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1-1/4 Bronze Pipe Cap - 44476 - 38-44476F1
Bronze NOT TO BE USED IN POTABLE WATER SYSTEMS.
1-1/4 Bronze Pipe Coupling - 44416 - 38-44416F1
Bronze and imported. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1-1/4 Bronze Pipe Tee - 44256 - 38-44256F1
Bronze and imported. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1-1/4 Brz Floor Flange Brass Fittings - 44-695 - 38-44695F1
1-1/4 Slot Hi Spd Thru Hul Brz Bronze Thru Hull - Hsslth-1250-W - 34-Hsslth1250Wf1
1-1/4 X 1 Bronze Hex Bushing - 44518 - 38-44518F1
Bronze hex head. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1-1/4 X 1 Bronze Reduce Coupling - 44446 - 38-44446F1
Bronze and imported. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1-1/4 X 3/4 Bronze Hex Bushing - 44517 - 38-44517F1
Bronze hex head. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1-1/4 X 5 Brass Pipe Nipple - 40127 - 38-40127F1
1-1/4 X 5 Brass Pipe Nipple NOT TO BE USED IN POTABLE WATER SYSTEMS.
1-1/4" Ball Valve W/ Ss Lever - 70-106-10 - 37-7010610F1
Cast bronze with a stainless steel handle and stem nut. Ball is chrome plated for long lasting corrosion resistance. Reinforced TFE seats and stuffing box ring.Made in U.S.A. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1-1/4" Bronze 45 Degree Street Elbow - 44206 - 38-44206F1
1-1/4" Bronze 45 Degree Street Elbow NOT TO BE USED IN POTABLE WATER SYSTEMS.
1-1/4" Bronze Full Flow In-Line Ball Valve - Ibv-1250 Bspp - 34-Ibv1250Bsppf1
Patented field reversible handle allows you to select the closed position orientation (clockwise or counterclockwise) that best suits the installation. Handle has square hole to accept standard ratchet, to help reach valves in hard-to-reach locations and ease actuation of difficult to operate valves. 400 WOG rated. Stainless steel handle and hardware. Chrome plated solid brass ball (not a hollow ball). PTFE seats and seals. UL Listed for fuel or water.NOT TO BE USED IN POTABLE WATER SYSTEMS.
1-1/4" Bronze Intake Strainer - 00Is125 - 379-00Is125F1
Cast bronze w/nut.
1-1/4" Bronze Seacock Body - 0805007Plb - 9-0805007Plbf1
Ball valve design. Cast bronze. Meets needs of applications that require long, scoop or flush type thru-hulls.
1-1/4" Bronze Seacock W/90° Tail Piece - 0834007Plb - 9-0834007Plbf1
Includes: thru-hull, hose adapter, drain plug, four pre-drilled mounting holes and bonding screw. Incorporates a plastic ball and seat assuring a tight seal and ease of operation and drain plugs for winterizing. Handles are easily removed. Overall height is measured from the top of the hose adapter to the bottom of the flange.
1-1/4" Intake Water Strainer - 0493007Plb - 9-0493007Plbf1
Cast bronze. Designed for easy installation and cleaning. Features mounting lugs cast into both sides to assure universal mounting, four outside tie rods and a 316 stainless steel strainer basket to minimize electrolysis. Hinged lugs for cast bronze cover permit easy removal and cleaning of basket. Drain plug in bottom casting is provided for easy removal of sediment and draining for winterization. Ratio given for open area to pipe size.
1-1/4" Scoop Thru Hull W/Nut - 0065Dp7Plb - 9-0065Dp7Plbf1
Cast bronze. Screw size is #8. Strainer is 3" x 4", except for 65DP7PLB which is 3-1/4" x 4-1/4". Includes nut. UL Listed. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1-1/4" Shut-Off Full Flow Ball Valve - 77-106-10 - 37-7710610F1
Comes with mounting pads. Use where full flow is required. Bronze body. Chromium plated ball. Reinforced TFE seats & stuffing box ring. Blow out stem design. Stainless steel lever and nut. Meets WW-V-35C Type II. BRZ style type. Made in U.S.A. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1-1/4" Strainer 304 Ss Basket - Arg-1250-S Bspp - 34-Arg1250Sbsppf1
Standard single strainers. No tie rods or leaks under pressure or vacuum. Quick and easy mounting system allowing removal of strainer without tools. #304 Stainless steel filter basket. O-ring seals at strainer cap and between strainer head and sight glass. See-thru screw-on strainer cap allows easy, no-tools maintenance. Spanner wrench holes in cover allow the use of SW-2531 wrench. Install with pipe or hose. Do not use chemical or abrasive cleaners on sight glass. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1-1/4" Thru-Hull With Nut - Th-125-W - 34-Th125Wf1
Should have threaded portion cut to proper length considering hull and butt block thickness. Consider thread depth when using a seacock. Sealant is recommended between hull and thru-hull flange. Includes nut.NOT TO BE USED IN POTABLE WATER SYSTEMS.
1-1/4"Bronze Seacock W/Straight Tail Piece - 0835007Plb - 9-0835007Plbf1
Includes: thru-hull, hose adapter, drain plug, four pre-drilled mounting holes and bonding screw. Incorporates a plastic ball and seat assuring a tight seal and ease of operation and drain plugs for winterizing. Handles are easily removed. Overall height is measured from the top of the hose adapter to the bottom of the flange.
1-1/4X3/4 Bronze Reduce Coupling - 44445 - 38-44445F1
Bronze and imported. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1-1/8 Chr Thru-Hull F/Hose - 035006Adpc - 9-035006Adpcf1
Available in plain or chrome plated bronze, these fittings have a hose barb connection and are recommended for use above the waterline only. The flange is machined to fit the hull tightly and grooved to retain bedding compound. Minimum hull thickness 3/8".
1-1/8 Ql Elbow Thru-Hull Blk 15/08 - Ma-042-Qlb - 81-Ma042Qlbf1
1-1/8 Thru Hull Connect Bulk - 0328Dp6A - 9-0328Dp6Af1
Molded white plastic with broad flange. For use with hose. Not recommended for use below waterline.
1-1/8" White Plastic Thru-Hull W/Broad Flange - 18090 - 50-18090F1
Molded plastic with broad flange. Per ABYC "Safety Standards for Small Craft". Not recommended for use below the waterline.
1" & 1-1/2" Inline Non-Return Valve - Lv1215 - 698-Lv1215F1
Simple way to maintain prime in a suction or discharge line. Designed to fit in-line. Use with manual or electric pumps.
1" & 1-1/8" Inline Non-Return Valve - Lv1218 - 698-Lv1218F1
Simple way to maintain prime in a suction or discharge line. Designed to fit in-line. Use with manual or electric pumps.
1" 3-Way Bronze Diverter Valve - 70-605-10 - 37-7060510F1
Features a chrome plated ball, reinforced TFE seats, stuffing box ring, and adjustable packing gland. Made in U.S.A. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1" Ball Valve W/ Ss Lever - 70-105-10 - 37-7010510F1
Cast bronze with a stainless steel handle and stem nut. Ball is chrome plated for long lasting corrosion resistance. Reinforced TFE seats and stuffing box ring.Made in U.S.A. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1" Bronze 45 Degree Street Elbow - 44205 - 38-44205F1
1" Bronze 45 Degree Street Elbow NOT TO BE USED IN POTABLE WATER SYSTEMS.
1" Bronze Full Flow In-Line Ball Valve - Ibv-1000 Bspp - 34-Ibv1000Bsppf1
Patented field reversible handle allows you to select the closed position orientation (clockwise or counterclockwise) that best suits the installation. Handle has square hole to accept standard ratchet, to help reach valves in hard-to-reach locations and ease actuation of difficult to operate valves. 400 WOG rated. Stainless steel handle and hardware. Chrome plated solid brass ball (not a hollow ball). PTFE seats and seals. UL Listed for fuel or water.NOT TO BE USED IN POTABLE WATER SYSTEMS.
1" Bronze Intake Strainer - 00Is100 - 379-00Is100F1
Cast bronze w/nut.
1" Bronze Seacock Body - 0805006Plb - 9-0805006Plbf1
Ball valve design. Cast bronze. Meets needs of applications that require long, scoop or flush type thru-hulls.
1" Bronze Seacock W/90° Tail Piece - 0834006Plb - 9-0834006Plbf1
Includes: thru-hull, hose adapter, drain plug, four pre-drilled mounting holes and bonding screw. Incorporates a plastic ball and seat assuring a tight seal and ease of operation and drain plugs for winterizing. Handles are easily removed. Overall height is measured from the top of the hose adapter to the bottom of the flange. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1" Intake Water Strainer - 0493006Plb - 9-0493006Plbf1
Cast bronze. Designed for easy installation and cleaning. Features mounting lugs cast into both sides to assure universal mounting, four outside tie rods and a 316 stainless steel strainer basket to minimize electrolysis. Hinged lugs for cast bronze cover permit easy removal and cleaning of basket. Drain plug in bottom casting is provided for easy removal of sediment and draining for winterization. Ratio given for open area to pipe size.
1" Scoop Thru Hull W/Nut - 0065Dp6Plb - 9-0065Dp6Plbf1
Cast bronze. Screw size is #8. Strainer is 3" x 4", except for 65DP7PLB which is 3-1/4" x 4-1/4". Includes nut. UL Listed. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1" Scoop Thru-Hull W/Nut - Sth-100-W - 34-Sth100Wf1
Includes locking nut. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1" Shut-Off Full Flow Ball Valve - 77-105-10 - 37-7710510F1
Comes with mounting pads. Use where full flow is required. Bronze body. Chromium plated ball. Reinforced TFE seats & stuffing box ring. Blow out stem design. Stainless steel lever and nut. Meets WW-V-35C Type II. BRZ style type. Made in U.S.A. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1" Strainer 304 Ss Basket - Arg-1000-S Bspp - 34-Arg1000Sbsppf1
Standard single strainers. No tie rods or leaks under pressure or vacuum. Quick and easy mounting system allowing removal of strainer without tools. #304 Stainless steel filter basket. O-ring seals at strainer cap and between strainer head and sight glass. See-thru screw-on strainer cap allows easy, no-tools maintenance. Spanner wrench holes in cover allow the use of SW-2531 wrench. Install with pipe or hose. Do not use chemical or abrasive cleaners on sight glass. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1" Thru-Hull With Nut - Th-100-W - 34-Th100Wf1
Should have threaded portion cut to proper length considering hull and butt block thickness. Consider thread depth when using a seacock. Sealant is recommended between hull and thru-hull flange. Includes nut.NOT TO BE USED IN POTABLE WATER SYSTEMS.
1"Bronze Seacock W/Straight Tail Piece - 0835006Plb - 9-0835006Plbf1
Includes: thru-hull, hose adapter, drain plug, four pre-drilled mounting holes and bonding screw. Incorporates a plastic ball and seat assuring a tight seal and ease of operation and drain plugs for winterizing. Handles are easily removed. Overall height is measured from the top of the hose adapter to the bottom of the flange.
1/2 Brass Sq Head Pipe Plug - 28087 - 38-28087F1
Imported. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1/2 Bronze 90 Deg Street Ell - 44163 - 38-44163F1
Bronze 90°, male/female threads. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1/2 Bronze Pipe Cap - 44473 - 38-44473F1
Bronze NOT TO BE USED IN POTABLE WATER SYSTEMS.
1/2 Bronze Pipe Coupling - 44413 - 38-44413F1
Bronze and imported. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1/2 Bronze Pipe Tee - 44253 - 38-44253F1
Bronze and imported. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1/2 Fp Tee Pvc Pipe Fittings - 805-005 - 38-805005F1
1/2 Pipe To Hose Adapter - 0076Dp4Plb - 9-0076Dp4Plbf1
Cast bronze. Meets requirements of USCG safety standards.
1/2 Thru Hull Connection - 0328Dp4 - 9-0328Dp4F1
Molded white plastic with broad flange. For use with hose. Not recommended for use below waterline.
1/2 Water Strnr Cover Brz Spare Part-Cast Bronze Cover Fits 1/2 Intake Strainer - 049300499E - 9-049300499Ef1
1/2 X 1/4 Bronze Hex Bushing - 44504 - 38-44504F1
Bronze hex head. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1/2 X 1/8 Bronze Hex Bushing - 44503 - 38-44503F1
Bronze hex head. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1/2 X 3 1/2 Brass Pipe Nipple - 40-065 - 38-40065F1
Nipple Brass 1/2 X 3 1/2 NOT TO BE USED IN POTABLE WATER SYSTEMS.
1/2 X 3/8 Bronze Hex Bushing - 44505 - 38-44505F1
Bronze hex head. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1/2" 3-Way Bronze Diverter Valve - 70-603-10 - 37-7060310F1
Features a chrome plated ball, reinforced TFE seats, stuffing box ring, and adjustable packing gland. Made in U.S.A. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1/2" Ball Valve W/ Ss Lever - 70-103-10 - 37-7010310F1
Cast bronze with a stainless steel handle and stem nut. Ball is chrome plated for long lasting corrosion resistance. Reinforced TFE seats and stuffing box ring.Made in U.S.A. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1/2" Brass Hose Splicer - 32096 - 38-32096F1
1/2" Brass Hose Splicer NOT TO BE USED IN POTABLE WATER SYSTEMS.
1/2" Bronze 45 Degree Street Elbow - 44203 - 38-44203F1
1/2" Bronze 45 Degree Street Elbow NOT TO BE USED IN POTABLE WATER SYSTEMS.
1/2" Hose X 1/2 Pipe Male Hose Barb - 32017 - 38-32017F1
Temperature and working pressure ranges - From -400F to +1600F at 150 PSI maximum. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1/2" Hose X 1/4 Pipe Male Hose Barb - 32015 - 38-32015F1
Temperature and working pressure ranges - From -400F to +1600F at 150 PSI maximum. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1/2" Hose X 3/4 Pipe Male Hose Barb - 32018 - 38-32018F1
Temperature and working pressure ranges - From -400F to +1600F at 150 PSI maximum. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1/2" Hose X 3/8 Pipe Male Hose Barb - 32016 - 38-32016F1
Temperature and working pressure ranges - From -400F to +1600F at 150 PSI maximum. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1/2" Intake Water Strainer - 0493004Plb - 9-0493004Plbf1
Cast bronze. Designed for easy installation and cleaning. Features mounting lugs cast into both sides to assure universal mounting, four outside tie rods and a 316 stainless steel strainer basket to minimize electrolysis. Hinged lugs for cast bronze cover permit easy removal and cleaning of basket. Drain plug in bottom casting is provided for easy removal of sediment and draining for winterization. Ratio given for open area to pipe size.
1/2" Scoop Thru Hull W/Nut - 0065Dp4Plb - 9-0065Dp4Plbf1
Cast bronze. Screw size is #8. Strainer is 3" x 4", except for 65DP7PLB which is 3-1/4" x 4-1/4". Includes nut. UL Listed. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1/2" Shut-Off Full Flow Ball Valve - 77-103-10 - 37-7710310F1
Comes with mounting pads. Use where full flow is required. Bronze body. Chromium plated ball. Reinforced TFE seats & stuffing box ring. Blow out stem design. Stainless steel lever and nut. Meets WW-V-35C Type II. BRZ style type. Made in U.S.A. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1/2" Stainless Steel Bow Shackle, Carded - 147012-1 - 354-1470121F1
Constructed of investment cast 316 stainless the D style shackle has straight sides with a U-shape rounded bottom. Designed for rigging applications with bidirectional loads. The U-shaped end can handle heavy loads, loads on the straight sides, however, may cause bending. We do not load rate cast shackles.
1/2" White Plastic Thru-Hull W/Broad Flange - 50-18011 - 50-18011F1
Molded plastic with broad flange. Per ABYC "Safety Standards for Small Craft". Not recommended for use below the waterline.
1/2X1/4 Bronze Reducing Coupling - 44434 - 38-44434F1
Bronze and imported. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1/2X3/8 Bronze Reducing Coupling - 44435 - 38-44435F1
Bronze and imported. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1/4 Brass Sq Head Pipe Plug - 28085 - 38-28085F1
Imported. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1/4 Bronze 90 Deg Street Ell - 44161 - 38-44161F1
Bronze 90°, male/female threads. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1/4 Bronze Pipe Cap - 44471 - 38-44471F1
Bronze NOT TO BE USED IN POTABLE WATER SYSTEMS.
1/4 Bronze Pipe Coupling - 44411 - 38-44411F1
Bronze and imported. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1/4 Bronze Pipe Tee - 44251 - 38-44251F1
Bronze and imported. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1/4 Fp Tee Pvc Pipe Fittings - 805-002 - 38-805002F1
1/4 X 1/8 Bronze Hex Bushing - 28102 - 38-28102F1
Bronze hex head. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1/4" Ball Valve W/ Ss Lever - 70-101-10 - 37-7010110F1
Cast bronze with a stainless steel handle and stem nut. Ball is chrome plated for long lasting corrosion resistance. Reinforced TFE seats and stuffing box ring.Made in U.S.A. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1/4" Brass Hose Splicer - 32093 - 38-32093F1
1/4" Brass Hose Splicer NOT TO BE USED IN POTABLE WATER SYSTEMS.
1/4" Bronze 45 Degree Street Elbow - 44-201 - 38-44201F1
1/4" Bronze 45 Degree Street Elbow NOT TO BE USED IN POTABLE WATER SYSTEMS.
1/4" Cable Clamps, Natural 6 Pcs. - 401251 - 639-401251F1
Marine Grade® Nylon Cable Clamp. Pure nylon for maximum stregth and resistance to solvents, oils, acids and moisture. Unique screw hole alignment feature to speed installation. Absorbs shock and vibration, reduces unwanted noise.
1/4" Hose X 1/4 Pipe Male Hose Barb - 32005 - 38-32005F1
Temperature and working pressure ranges - From -400F to +1600F at 150 PSI maximum. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1/4" Hose X 1/8 Pipe Male Hose Barb - 32004 - 38-32004F1
Temperature and working pressure ranges - From -400F to +1600F at 150 PSI maximum. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1/4" Hose X 3/8 Pipe Male Hose Barb - 32006 - 38-32006F1
Temperature and working pressure ranges - From -400F to +1600F at 150 PSI maximum. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1/4" Npt X 3/8" Alum Hose Ba - 033442-10 - 114-03344210F1
Allows customers to customize their fuel line assemblies to match existing connectors on their fuel tanks! All fittings are built to OEM specifications for replacement parts and use o-ring construction for tight, leak-free connections.
1/4" Shut-Off Full Flow Ball Valve - 77-101-10 - 37-7710110F1
Comes with mounting pads. Use where full flow is required. Bronze body. Chromium plated ball. Reinforced TFE seats & stuffing box ring. Blow out stem design. Stainless steel lever and nut. Meets WW-V-35C Type II. BRZ style type. Made in U.S.A. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1/4" Stainless Steel Bow Shackle, Carded - 147006-1 - 354-1470061F1
Constructed of investment cast 316 stainless the D style shackle has straight sides with a U-shape rounded bottom. Designed for rigging applications with bidirectional loads. The U-shaped end can handle heavy loads, loads on the straight sides, however, may cause bending. We do not load rate cast shackles.
1/4X1/8 Bronze Reducing Coupling - 44430 - 38-44430F1
Bronze and imported. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1/8 Brass Sq Head Pipe Plug - 28084 - 38-28084F1
Imported. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1/8 Bronze 90 Deg Street Ell - 44160 - 38-44160F1
Bronze 90°, male/female threads. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1/8 Bronze Pipe Cap - 44470 - 38-44470F1
Bronze NOT TO BE USED IN POTABLE WATER SYSTEMS.
1/8 Bronze Pipe Coupling - 44410 - 38-44410F1
Bronze and imported. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1/8 Bronze Pipe Tee - 44250 - 38-44250F1
Bronze and imported. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1000 Gph Proline Bilge Pump - 22102 - 189-22102F1
Features an efficient, water-cooled motor with greater torque and less power consumption; a tough resin housing which resists shock, detergents, fuel and corrosives; a rugged impeller and a quick release bracket. 4 3/8" high. 3-Year warranty.
1000 Gph Ultima Automatic Bilge Pump - 32-47260-003 - 189-3247260003F1
Sleek, reliable and compact unit with integrated Ultima switch ready to install and run for years of service.Patented Mirus field detector cellsNo exposed sensors, eliminates corrosion possibilitiesNot affected by oil or foreign debrisIncludes both a straight and 90° smooth elbow Dura-Port and a removable check valveMade in USA.
101Cw Stainless Steel Finsh (Cup) Washers, #10, 100/Box - 5056-975 - 828-101Cwf1
18-8 stainless steel.
101Fw Stainless Steel Flat Washers, #10, 100/Box - 5055-210 - 828-101Fwf1
18-8 stainless steel.
101Lw Stainless Steel Lock Washers, #10, 100/Box - 5058-010 - 828-101Lwf1
18-8 stainless steel.
10241 Stainless Steel Wing Nuts, 10-24, 100/Box - 5038-010 - 828-10241Wnf1
18-8 stainless steel.
10241An Stainless Steel Acorn Nuts, 10-24, 100/Box - 5037-010 - 828-10241Anf1
18-8 stainless steel.
10241Hn Stainless Steel Hex Nuts, 10-24, 100/Box - 5035-010 - 828-10241Hnf1
18-8 stainless steel.
10241Ln Stainless Steel Nyloc Nuts, 10-24, 100/Box - 5034-010 - 828-10241Lnf1
18-8 stainless steel.
10321Hn Stainless Steel Hex Nuts, 10-32, 100/Box - 5035-011 - 828-10321Hnf1
18-8 stainless steel.
10321Ln Stainless Steel Nyloc Nuts, 10-32, 100/Box - 5034-011 - 828-10321Lnf1
18-8 stainless steel.
10Lb Single Drop-In Locker Kit Disc - 15010010 - 606-15010010F1
12" Stainless Steel Stud Mount Hand Rails - 254112-1 - 354-2541121F1
Formed 304 stainless steel. 2" Rail height.
12° Tilt Bronze Thru-Hull Ducer - 010-10982-21 - 322-0101098221F1
Dual frequency (50/200kHz) transducer is specially designed to provide a vertical beam without a fairing block. Inside the housing, the ceramic element is tilted to provide built-in deadrise compensation. The resulting vertical beam provides excellent echo returns for more accurate depth readings. The nearly flush housing minimizes drag with only 3/16" extending outside of the hull. Includes a built-in temp sensor and handles up to 600 watts (RMS) power. Includes 39' cable.
121Fw Stainless Steel Flat Washers, 1/2", 50/Box - 5055-222 - 828-121Fwf1
18-8 stainless steel.
121Hn Stainless Steel Hex Nuts, 1/2", 50/Box - 5026-022 - 828-121Hnf1
18-8 stainless steel.
121Ln Stainless Steel Nyloc Nuts, 1/2" Nc, 50/Box - 5034-022 - 828-121Lnf1
18-8 stainless steel.
121Lw Stainless Steel Lock Washers, 1/2", 100/Box - 5058-022 - 828-121Lwf1
18-8 stainless steel.
121Wf Stainless Steel Fender Washers, 50, 1/2"/Box - 5057-400 - 828-121Wff1
18-8 stainless steel.
12241Hn Stainless Steel Hex Nuts, 12-24, 100/Box - 5035-012 - 828-12241Hnf1
18-8 stainless steel.
1250 Gph Low Boy Bilge Pump, 12V - 33103 - 189-33103F1
Low profile pump design for ease of mounting and removal in tight bilge areas, especially suited for vessels with inboard or I/O engines. Shaft seal: lip sealRemovable cartridge, easy to cleanWater cooled motorComplies to ABYC, NMMA and ISO8849 marine specifications3 year warranty
1250 Gph Ultima Automatic Bilge Pump - 32-47261-002 - 189-3247261002F1
Sleek, reliable and compact unit with integrated Ultima switch ready to install and run for years of service.Patented Mirus field detector cellsNo exposed sensors, eliminates corrosion possibilitiesNot affected by oil or foreign debrisIncludes both a straight and 90° smooth elbow Dura-Port and a removable check valveMade in USA.
12V 4 Gpm Washdown Pump System 60 Psi Shut Off - Nmwp1-040-055-42B - 50-17863F1
12X361Tr Stainless Steel Threaded Rod, 1/2" X 36" - 5091-322 - 828-12X361Trf1
18-8 stainless steel.
13-1/2" 25° Ss Steering Wheel - V48 - 216-Ultv48F1
High quality 304 Stainless Steel 5 spoke steering wheel featuring welded spokes and hub. 3/4" tapered shaft fits nearly every steering helm in the market.
135 Deg. Valve Extenders - 8029135 - 368-8029135F1
Enjoy easy access to your hard-to-reach front and rear valve stems. 45° and 90° nickel plated brass valve extenders are angled to lengthen your front wheel valves. They extend your standard valves almost 2. 135° and 180° nickel plated brass valve extenders are angled to reverse your outer dual tire valves through the opening in the wheel for easy access. These extenders make checking and inflating your dual tires easy. Includes 2 extenders and 2 caps per package.
14' Accura Rotary Steering System - Accura14Fc - 216-Accura14Fc Superseded By: 216-Fourtechblk14Ztff1
Planetary Gear Design for enhanced more balanced steering, reduced lost motion and improved efficiency. The Zerotorque patented clutch eliminates continuous load on the operator caused by propeller torque. This makes Accura an ideal choice for boats without power assist or any boat with moderate torque loads on the wheel. 3.8 turns lock-to-lock. Includes:T73NR FC - helmX34 - 90° bezelM66 - steering cable ^Includes:T73NR FC anti-feedback helmX34 90° bezelM66 steering cable
1407005 Pvc 90° Elbow, 1/2" - 1407-005 - 38-1407005F1
90° PVC (Insert x FIPT)
1407007 Pvc 90° Elbow, 3/4" - 1407-007 - 38-1407007F1
90° PVC (Insert x FIPT)
1407101 Pvc 90° Reducing Elbow, 3/4" X 1/2" - 1407-101 - 38-1407101F1
90° PVC (Insert x FIPT)
141 Stainless Steel Wing Nuts, 1/4" Nc, 100/Box - 5038-014 - 828-141Wnf1
18-8 stainless steel.
1413005 Pvc 90° Elbow, 1/2" - 1413-005 - 38-1413005F1
90° PVC (Insert x MIPT)
1413015 Pvc 90° Elbow, 1-1/2" - 1413-015 - 38-1413015F1
90° PVC (Insert x MIPT)
141An Stainless Steel Acorn Nuts, 1/4" Nc, 100/Box - 5037-014 - 828-141Anf1
18-8 stainless steel.
141Cw Stainless Steel Finsh (Cup) Washers, 1/4", 100/Box - 5056-979 - 828-141Cwf1
18-8 stainless steel.
141Fw Stainless Steel Flat Washers, 1/4", 100/Box - 5055-214 - 828-141Fwf1
18-8 stainless steel.
141Hn Stainless Steel Hex Nuts, 1/4", 100/Box - 5026-014 - 828-141Hnf1
18-8 stainless steel.
141Hnf Stainless Steel Hex Nuts, 1/4" Nf, 100/Box - 5027-014 - 828-141Hnff1
18-8 stainless steel.
141Ln Stainless Steel Nyloc Nuts, 1/4" Nc, 100/Box - 5034-014 - 828-141Lnf1
18-8 stainless steel.
141Lw Stainless Steel Lock Washers, 1/4", 100/Box - 5058-014 - 828-141Lwf1
18-8 stainless steel.
141Wf Stainless Steel Fender Washers, 100, 1/4"/Box - 5057-395 - 828-141Wff1
18-8 stainless steel.
1429005 Pvc Coupling, 1/2" - 1429-005 - 38-1429005F1
PVC Coupling (Insert x Insert)
1436005 Pvc Male Adapter, 1/2" - 1436-005 - 38-1436005F1
(Insert x MIPT)
1436007 Pvc Male Adapter, 3/4" - 1436-007 - 38-1436007F1
(Insert x MIPT)
1436010 Pvc Male Adapter, 1" - 1436-010 - 38-1436010F1
(Insert x MIPT)
1436015 Pvc Male Adapter, 1-1/2" - 1436-015 - 38-1436015F1
(Insert x MIPT)
1436251 Pvc Male Reducing Adapter, 2" X 1-1/2" - 1436-251 - 38-1436251F1
PVC Male Reducing Adapter (MIPT x Insert)
14X361Tr Stainless Steel Threaded Rod, 1/4" X 36" - 5091-314 - 828-14X361Trf1
18-8 stainless steel.
15-1/2" 25° Ss Steering Wheel - V42 - 216-Ultv42F1
High quality 304 Stainless Steel 5 spoke steering wheel featuring welded spokes and hub. 3/4" tapered shaft fits nearly every steering helm in the market.
1600 Gph Heavy Duty Combo Bilge Pump W/Automatic Electromagnetic Switch, 12V - 01604-00 - 189-0160400F1
HD bilge engineered with a tall stack heavy duty 12 pole hermetically welded motor, double ball bearing design, lip seal. Prewired with a Completely Sealed Compact Mechanical Electro-Magnetic Switch1 1/8" & 1 " Internally Threaded PortsRemovable Check ValveMolded T-Bracket BaseBest Motor Performance and Longevity With Less Noise and VibrationBetter Rotor Support With Less Rotor DeflationLess Prone to Scoring and Shaft DamageAssured Waterproof and TightnessLess Amp Draw Than Similar Options3 year warranty
1600 Heavy Duty Automatic Bilge Pump With Ultima Switch 12V - 01674-001 - 189-01674001F1
HD bilge engineered with a tall stack heavy duty 12 pole hermetically welded motor, double ball bearing design, lip seal and 3/16th stainless steel shaft Prewired with a compact ultima switch3 Year warranty
18' Accura Rotary Steering System - Accura18Fc - 216-Accura18Fc Superseded By: 216-Fourtechblk18Ztff1
Planetary Gear Design for enhanced more balanced steering, reduced lost motion and improved efficiency. The Zerotorque patented clutch eliminates continuous load on the operator caused by propeller torque. This makes Accura an ideal choice for boats without power assist or any boat with moderate torque loads on the wheel. 3.8 turns lock-to-lock. Includes:T73NR FC - helmX34 - 90° bezelM66 - steering cable ^Includes:T73NR FC anti-feedback helmX34 90° bezelM66 steering cable
18" 25° Ss Steering Wheel - V47 - 216-Ultv47F1
High quality 304 Stainless Steel 5 spoke steering wheel featuring welded spokes and hub. 3/4" tapered shaft fits nearly every steering helm in the market.
180 Deg. Valve Extenders - 8029180 - 368-8029180F1
Enjoy easy access to your hard-to-reach front and rear valve stems. 45° and 90° nickel plated brass valve extenders are angled to lengthen your front wheel valves. They extend your standard valves almost 2. 135° and 180° nickel plated brass valve extenders are angled to reverse your outer dual tire valves through the opening in the wheel for easy access. These extenders make checking and inflating your dual tires easy. Includes 2 extenders and 2 caps per package.
19' Accura Rotary Steering System - Accura19Fc - 216-Accura19Fc Superseded By: 216-Fourtechblk19Ztff1
Planetary Gear Design for enhanced more balanced steering, reduced lost motion and improved efficiency. The Zerotorque patented clutch eliminates continuous load on the operator caused by propeller torque. This makes Accura an ideal choice for boats without power assist or any boat with moderate torque loads on the wheel. 3.8 turns lock-to-lock. Includes:T73NR FC - helmX34 - 90° bezelM66 - steering cable ^Includes:T73NR FC anti-feedback helmX34 90° bezelM66 steering cable
1X3/4 Pipe Reducing Coupling - 44442 - 38-44442F1
Bronze and imported. NOT TO BE USED IN POTABLE WATER SYSTEMS.
2 " Bronze 45 Degree Street Elbow - 44-208 - 38-44208F1
2 " Bronze 45 Degree Street Elbow NOT TO BE USED IN POTABLE WATER SYSTEMS.
2 1/2 Pipe To Hose Adapter - 0076010Plb - 9-0076010Plbf1
Cast bronze. Meets requirements of USCG safety standards.
2 5/16" Coupler Lock - 63227 - 220-63227F1
Durable cast bodyIncludes 2 keys
2 Bib Orifice Meter Fitting - 865317T01 - 710-22-865317T01F1
2 Bronze 90 Deg Street Elbow - 44168 - 38-44168F1
Bronze 90°, male/female threads. NOT TO BE USED IN POTABLE WATER SYSTEMS.
2 Bronze Pipe Cap - 44478 - 38-44478F1
Bronze NOT TO BE USED IN POTABLE WATER SYSTEMS.
2 Bronze Pipe Coupling - 44418 - 38-44418F1
Bronze and imported. NOT TO BE USED IN POTABLE WATER SYSTEMS.
2 Bronze Pipe Tee - 44258 - 38-44258F1
Bronze and imported. NOT TO BE USED IN POTABLE WATER SYSTEMS.
2 Pipe To Hose Adapter - 0076009Plb - 9-0076009Plbf1
Cast bronze. Meets requirements of USCG safety standards.
2 Slot Thru Hull Brz Bronze Thru Hull - Hsslth-2000-W - 34-Hsslth2000Wf1
2 Water Strnr Cover Brz Spare Part-Cast Bronze Cover Fits 2 Intake Strainer - 049300999E - 9-049300999Ef1
2 X 1-1/2 Bronze Hex Bushing - 44531 - 38-44531F1
Bronze hex head. NOT TO BE USED IN POTABLE WATER SYSTEMS.
2 X 6 Brass Pipe Nipple - 40168 - 38-40168F1
2 X 6 Brass Pipe Nipple NOT TO BE USED IN POTABLE WATER SYSTEMS.
2-1/2 Bronze 90 Deg Street Ell - 44169 - 38-44169F1
Bronze 90°, male/female threads. NOT TO BE USED IN POTABLE WATER SYSTEMS.
2-1/2 Intake Water Strainer - 0493010Plb - 9-0493010Plbf1
Cast bronze. Designed for easy installation and cleaning. Features mounting lugs cast into both sides to assure universal mounting, four outside tie rods and a 316 stainless steel strainer basket to minimize electrolysis. Hinged lugs for cast bronze cover permit easy removal and cleaning of basket. Drain plug in bottom casting is provided for easy removal of sediment and draining for winterization. Ratio given for open area to pipe size.
2-1/2 X 2 Hex Bushing - 44535 - 38-44535F1
Bronze hex head. NOT TO BE USED IN POTABLE WATER SYSTEMS.
2-1/2" Bronze Full Flow In-Line Ball Valve - Ibv-2500 Bspp - 34-Ibv2500Bsppf1
Patented field reversible handle allows you to select the closed position orientation (clockwise or counterclockwise) that best suits the installation. Handle has square hole to accept standard ratchet, to help reach valves in hard-to-reach locations and ease actuation of difficult to operate valves. 400 WOG rated. Stainless steel handle and hardware. Chrome plated solid brass ball (not a hollow ball). PTFE seats and seals. UL Listed for fuel or water.NOT TO BE USED IN POTABLE WATER SYSTEMS.
2-3/8" Stainless Steel Snap Hook - 151560 - 354-151560F1
These carabiners feature an interlocking spring-loaded gate snap for quick attachment to a wide range of fixing points. Constructed of formed 316 stainless steel for corrosion resistance and durability. Multi-functional they can be used for lifting, rigging, and anchoring applications. For use with ropes, chains, straps, and small diameter cable.
2-3/8" Stainless Steel Snap Hook - 151560-1 - 354-1515601F1
These carabiners feature an interlocking spring-loaded gate snap for quick attachment to a wide range of fixing points. Constructed of formed 316 stainless steel for corrosion resistance and durability. Multi-functional they can be used for lifting, rigging, and anchoring applications. For use with ropes, chains, straps, and small diameter cable.
2-Rod Stainless Steel Rod Hanger Rack - F16-2751-1 - 236-F1627511F1
Rod-tip spring design securely locks rods in positon. Easy to install UV stabilized polyethylene racks available in two sizes for convenient 2-rod and 4-rod storage. Pre-drilled recessed mounting holes and beveled edges for clean, attractive look.Can be mounted horizontally, vertically or overheadSpring locking rod tip holderPolished stainless steel/Delrin rod hanger componentsUV-stabilized poly racks w/beveled edges offer a finished look
2-Way Bilge Pump Control Switch - 82004 - 189-82004F1
Switch panel that gives full control of your equipment. Just push the button to pump the bilge. Matte black finish panel has an integrated fuse holder and operating light. Fuses included. 3" x 2-1/8" x 1-1/2"D.
2.5 Dia Rig Hose Blk-50 Roll Heavy Duty Ss From Rfh251 - Rfh-Hd2.5-Dp - 232-Rfhhd25Dpf1
2" Ball Valve W/ Ss Lever - 70-108-10 - 37-7010810F1
Cast bronze with a stainless steel handle and stem nut. Ball is chrome plated for long lasting corrosion resistance. Reinforced TFE seats and stuffing box ring.Made in U.S.A. NOT TO BE USED IN POTABLE WATER SYSTEMS.
2" Bronze Full Flow In-Line Ball Valve - Ibv-2000 Bspp - 34-Ibv2000Bsppf1
Patented field reversible handle allows you to select the closed position orientation (clockwise or counterclockwise) that best suits the installation. Handle has square hole to accept standard ratchet, to help reach valves in hard-to-reach locations and ease actuation of difficult to operate valves. 400 WOG rated. Stainless steel handle and hardware. Chrome plated solid brass ball (not a hollow ball). PTFE seats and seals. UL Listed for fuel or water.NOT TO BE USED IN POTABLE WATER SYSTEMS.
2" Bronze Seacock Body - 0805009Plb - 9-0805009Plbf1
Ball valve design. Cast bronze. Meets needs of applications that require long, scoop or flush type thru-hulls. NOT TO BE USED IN POTABLE WATER SYSTEMS.
2" Coupler Lock - 63228 - 220-63228F1
Durable cast bodyIncludes 2 keys
2" Exhaust Thru-Hull, Black W/Flapper - 1200301 - 383-1200301F1
2" Exhaust Thru-Hull, White W/Flapper - 1200300 - 383-1200300F1
2" Intake Water Strainer - 0493009Plb - 9-0493009Plbf1
Cast bronze. Designed for easy installation and cleaning. Features mounting lugs cast into both sides to assure universal mounting, four outside tie rods and a 316 stainless steel strainer basket to minimize electrolysis. Hinged lugs for cast bronze cover permit easy removal and cleaning of basket. Drain plug in bottom casting is provided for easy removal of sediment and draining for winterization. Ratio given for open area to pipe size.
2" Shut-Off Full Flow Ball Valve - 77-108-10 - 37-7710810F1
Comes with mounting pads. Use where full flow is required. Bronze body. Chromium plated ball. Reinforced TFE seats & stuffing box ring. Blow out stem design. Stainless steel lever and nut. Meets WW-V-35C Type II. BRZ style type. Made in U.S.A. NOT TO BE USED IN POTABLE WATER SYSTEMS.
2" Stainless Steel Receiver Lock - Rh3Ss - 124-Rh3Ssf1
Protects hitch & trailer against theft and accidentsSolid stainless steelReceiver lock with 5/8" diameter pin for 2" x 2" receiver (Class 3, 4)
2" Strainer 304 Ss Basket - Arg-2000-S Bspp - 34-Arg2000Sbsppf1
Standard single strainers. No tie rods or leaks under pressure or vacuum. Quick and easy mounting system allowing removal of strainer without tools. #304 Stainless steel filter basket. O-ring seals at strainer cap and between strainer head and sight glass. See-thru screw-on strainer cap allows easy, no-tools maintenance. Spanner wrench holes in cover allow the use of SW-2531 wrench. Install with pipe or hose. Do not use chemical or abrasive cleaners on sight glass. NOT TO BE USED IN POTABLE WATER SYSTEMS.
2" Thru-Hull With Nut - Th-200-W - 34-Th200Wf1
Should have threaded portion cut to proper length considering hull and butt block thickness. Consider thread depth when using a seacock. Sealant is recommended between hull and thru-hull flange. Includes nut.NOT TO BE USED IN POTABLE WATER SYSTEMS.
20' Accura Rotary Steering System - Accura20Fc - 216-Accura20Fc Superseded By: 216-Fourtechblk20Ztff1
Planetary Gear Design for enhanced more balanced steering, reduced lost motion and improved efficiency. The Zerotorque patented clutch eliminates continuous load on the operator caused by propeller torque. This makes Accura an ideal choice for boats without power assist or any boat with moderate torque loads on the wheel. 3.8 turns lock-to-lock. Includes:T73NR FC - helmX34 - 90° bezelM66 - steering cable ^Includes:T73NR FC anti-feedback helmX34 90° bezelM66 steering cable
20" 25° Ss Steering Wheel - V44 - 216-Ultv44F1
High quality 304 Stainless Steel 5 spoke steering wheel featuring welded spokes and hub. 3/4" tapered shaft fits nearly every steering helm in the market.
20° Tilt Bronze Thru-Hull Ducer - 010-10982-20 - 322-0101098220F1
Dual frequency (50/200kHz) transducer is specially designed to provide a vertical beam without a fairing block. Inside the housing, the ceramic element is tilted to provide built-in deadrise compensation. The resulting vertical beam provides excellent echo returns for more accurate depth readings. The nearly flush housing minimizes drag with only 3/16" extending outside of the hull. Includes a built-in temp sensor and handles up to 600 watts (RMS) power. Includes 39' cable.
212 Piece Stainless Steel Fastener Display - Sp212Sc - 50-01993F1
Kit Includes: Variety of popular fastener types and sizes. See seachoice.com for a complete listing(3) Unit Header Signs - Model 01979(1) Bin Labels(2) 18 Drawer Clear Cabinets - Model 01986(3) 13 Shelf Units - Model 01987(12 cases of 24) Blue Bins - Model 01988(12 cases of 24) Bin Dividers - Model 0198913 Shelf Units are manufactured from high-grade, 22-gauge steel with a powder-coated finish. Assembly required: units are easily assembled with the included hardware, and include adjustable shelves w/clips. Capacity: 500 lbs. per shelf.
2200 Gph Heavy Duty Automatic Bilge Pump With Electro-Magnetic Switch,, 12V - 02204-00 - 189-0220400F1
HD bilge engineered with a tall stack heavy duty 12 pole hermetically welded motor, double ball bearing design, mechanical seal and 3/16th stainless steel shaft. Prewired with a Completely Sealed Compact Mechanical Electro-Magnetic Switch1 1/8" & 1 ¼" Internally Threaded PortsRemovable Check ValveMolded T-Bracket BaseBest Motor Performance and Longevity With Less Noise and VibrationBetter Rotor Support With Less Rotor DeflationLess Prone to Scoring and Shaft DamageAssured Waterproof and TightnessLess Amp Draw Than Similar Options3 year warranty
2200 Heavy Duty Automatic Bilge Pump With Ultima Switch 12V - 02274-001 - 189-02274001F1
HD bilge engineered with a tall stack heavy duty 12 pole hermetically welded motor, double ball bearing design, mechanical seal and 3/16th stainless steel shaft Prewired with a compact ultima switch1-1/8" & 1-1/4" internally threaded portsRemovable check valveMolded T-bracket base3 Year warranty
25' Hose Assembly Ul For 975/998 - 13836B - 792-13836Bf1
Hose Assembly UL for 975/998
2X1-1/2 Bronze Reducing Coupling - 44454 - 38-44454F1
Bronze and imported. NOT TO BE USED IN POTABLE WATER SYSTEMS.
3 1/2 Id Cor Hardwall 12.5' Wet Exhaust/Water Hose, Black 250 F, Sae J2006-R2, Lloyd'S - 252-3126 - 606-2523126F1
3 Thru Hull Brz Cast Bronze-Machined Flange 3 Pipe - 3 1/2 Mtg Hole - 0322011Plb - 9-0322011Plbf1
3-1/2" Round Bronze Strainer For 1" T-Hulls - 0086Dp3Plb - 9-0086Dp3Plbf1
Cast bronze. Screw size is #8. UL Listed. NOT TO BE USED IN POTABLE WATER SYSTEMS.
3-1/2" Round Strainer - 00Sr350 - 379-00Sr350F1
Cast bronze.
3-1/4" Stainless Steel Snap Hook - 151580 - 354-151580F1
These carabiners feature an interlocking spring-loaded gate snap for quick attachment to a wide range of fixing points. Constructed of formed 316 stainless steel for corrosion resistance and durability. Multi-functional they can be used for lifting, rigging, and anchoring applications. For use with ropes, chains, straps, and small diameter cable.
3-1/4" Stainless Steel Snap Hook - 151580-1 - 354-1515801F1
These carabiners feature an interlocking spring-loaded gate snap for quick attachment to a wide range of fixing points. Constructed of formed 316 stainless steel for corrosion resistance and durability. Multi-functional they can be used for lifting, rigging, and anchoring applications. For use with ropes, chains, straps, and small diameter cable.
3-1/4" Stainless Steel Snap Hook, 25/Display - 151580-5 - 354-1515805F1
These carabiners feature an interlocking spring-loaded gate snap for quick attachment to a wide range of fixing points. Constructed of formed 316 stainless steel for corrosion resistance and durability. Multi-functional they can be used for lifting, rigging, and anchoring applications. For use with ropes, chains, straps, and small diameter cable.
3-Rod Stainless Steel Rod Hanger Rack - F16-2753-1 - 236-F1627531F1
Rod-tip spring design securely locks rods in positon. Easy to install UV stabilized polyethylene racks available in two sizes for convenient 2-rod and 4-rod storage. Pre-drilled recessed mounting holes and beveled edges for clean, attractive look.Can be mounted horizontally, vertically or overheadSpring locking rod tip holderPolished stainless steel/Delrin rod hanger componentsUV-stabilized poly racks w/beveled edges offer a finished look
3-Way Bilge Pump Control Switch - 82044 - 189-82044F1
Switch panel that gives full control of your equipment. Just push the button for manual or automatic bilge pumping. The automatic feature operates in combination with automatic bilge switches or electronic float switches. Matte black finish panel has an integrated fuse holder and operating light. Fuses included. 3" x 2-1/8" x 1-1/2"D.
3" Exhaust Thru-Hull, Black W/Flapper - 1200299 - 383-1200299F1
3" Exhaust Thru-Hull, White W/Flapper - 1200298 - 383-1200298F1
3" Round Bronze Strainer For 3/4" T-Hulls - 0086Dp2Plb - 9-0086Dp2Plbf1
Cast bronze. Screw size is #8. UL Listed. NOT TO BE USED IN POTABLE WATER SYSTEMS.
3/16" Stainless Steel Bow Shackle, Bulk - 147004 - 354-147004F1
Constructed of investment cast 316 stainless the D style shackle has straight sides with a U-shape rounded bottom. Designed for rigging applications with bidirectional loads. The U-shaped end can handle heavy loads, loads on the straight sides, however, may cause bending. We do not load rate cast shackles.
3/16" Stainless Steel Bow Shackle, Carded - 147004-1 - 354-1470041F1
Constructed of investment cast 316 stainless the D style shackle has straight sides with a U-shape rounded bottom. Designed for rigging applications with bidirectional loads. The U-shaped end can handle heavy loads, loads on the straight sides, however, may cause bending. We do not load rate cast shackles.
3/4 90 Deg. Pipe To Hose Adap - 0063Dp5Plb - 9-0063Dp5Plbf1
Cast bronze. Meets requirements of USCG safety standards.
3/4 Bronze 90 Deg Street Ell - 44164 - 38-44164F1
Bronze 90°, male/female threads. NOT TO BE USED IN POTABLE WATER SYSTEMS.
3/4 Bronze Pipe Cap - 44474 - 38-44474F1
Bronze NOT TO BE USED IN POTABLE WATER SYSTEMS.
3/4 Bronze Pipe Coupling - 44414 - 38-44414F1
Bronze and imported. NOT TO BE USED IN POTABLE WATER SYSTEMS.
3/4 Bronze Pipe Tee - 44254 - 38-44254F1
Bronze and imported. NOT TO BE USED IN POTABLE WATER SYSTEMS.
3/4 Brz Floor Flange Fittings - 44-693 - 38-44693F1
3/4 Fp Tee Pvc Pipe Fittings - 805-007 - 38-805007F1
3/4 I.D. Female Garden Hose - 30034 - 38-30034F1
All brass corrugated hose couplings. Repair for any type hose - plastic, rubber and high pressure. Tight, leakproof connection quickly and easily made with any hose clamp. NOT TO BE USED IN POTABLE WATER SYSTEMS.
3/4 I.D. Male Garden Hose - 30042 - 38-30042F1
All brass corrugated hose couplings. Repair for any type hose - plastic, rubber and high pressure. Tight, leakproof connection quickly and easily made with any hose clamp. NOT TO BE USED IN POTABLE WATER SYSTEMS.
3/4 Pipe To Hose Adapter - 0076Dp5Plb - 9-0076Dp5Plbf1
Cast bronze. Meets requirements of USCG safety standards.
3/4 Slip Cap Pvc Pipe Fittings - 847-007 - 38-847007F1
3/4 Slot Hi Spd Thru Hull Brz Bronze Thru Hull - Hsslth-750-W - 34-Hsslth750Wf1
3/4 Thru Hull Connection Bulk - 0328Dp5 - 9-0328Dp5F1
Molded white plastic with broad flange. For use with hose. Not recommended for use below waterline.
3/4 Thru Hull Connection Chr - 0350005Dpc - 9-0350005Dpcf1
Available in plain or chrome plated bronze, these fittings have a hose barb connection and are recommended for use above the waterline only. The flange is machined to fit the hull tightly and grooved to retain bedding compound. Minimum hull thickness 3/8".
3/4 Thru Hull Connection Pln - 0350005Dpp - 9-0350005Dppf1
Available in plain or chrome plated bronze, these fittings have a hose barb connection and are recommended for use above the waterline only. The flange is machined to fit the hull tightly and grooved to retain bedding compound. Minimum hull thickness 3/8".
3/4 X 1/2 Bronze Hex Bushing - 44509 - 38-44509F1
Bronze hex head. NOT TO BE USED IN POTABLE WATER SYSTEMS.
3/4 X 1/4 Bronze Hex Bushing - 44507 - 38-44507F1
Bronze hex head. NOT TO BE USED IN POTABLE WATER SYSTEMS.
3/4 X 3/8 Bronze Hex Bushing - 44508 - 38-44508F1
Bronze hex head. NOT TO BE USED IN POTABLE WATER SYSTEMS.
3/4" 3-Way Bronze Diverter Valve - 70-604-10 - 37-7060410F1
Features a chrome plated ball, reinforced TFE seats, stuffing box ring, and adjustable packing gland. Made in U.S.A. NOT TO BE USED IN POTABLE WATER SYSTEMS.
3/4" Ball Valve W/ Ss Lever - 70-104-10 - 37-7010410F1
Cast bronze with a stainless steel handle and stem nut. Ball is chrome plated for long lasting corrosion resistance. Reinforced TFE seats and stuffing box ring.Made in U.S.A. NOT TO BE USED IN POTABLE WATER SYSTEMS.
3/4" Black Plastic Thru-Hull W/Broad Flange - 50-18151 - 50-18151F1
Molded plastic with broad flange. Per ABYC "Safety Standards for Small Craft". Not recommended for use below the waterline.
3/4" Brass Hose Splicer - 32098 - 38-32098F1
3/4" Brass Hose Splicer NOT TO BE USED IN POTABLE WATER SYSTEMS.
3/4" Bronze 45 Degree Street Elbow - 44204 - 38-44204F1
3/4" Bronze 45 Degree Street Elbow NOT TO BE USED IN POTABLE WATER SYSTEMS.
3/4" Bronze Full Flow In-Line Ball Valve - Ibv-750 Bspp - 34-Ibv750Bsppf1
Patented field reversible handle allows you to select the closed position orientation (clockwise or counterclockwise) that best suits the installation. Handle has square hole to accept standard ratchet, to help reach valves in hard-to-reach locations and ease actuation of difficult to operate valves. 400 WOG rated. Stainless steel handle and hardware. Chrome plated solid brass ball (not a hollow ball). PTFE seats and seals. UL Listed for fuel or water.NOT TO BE USED IN POTABLE WATER SYSTEMS.
3/4" Bronze Intake Strainer - 00Is75 - 379-00Is75F1
Cast bronze w/nut.
3/4" Bronze Seacock Body - 0805005Plb - 9-0805005Plbf1
Ball valve design. Cast bronze. Meets needs of applications that require long, scoop or flush type thru-hulls.
3/4" Bronze Seacock W/90° Tail Piece - 0834005Plb - 9-0834005Plbf1
Includes: thru-hull, hose adapter, drain plug, four pre-drilled mounting holes and bonding screw. Incorporates a plastic ball and seat assuring a tight seal and ease of operation and drain plugs for winterizing. Handles are easily removed. Overall height is measured from the top of the hose adapter to the bottom of the flange.
3/4" Bronze Seacock W/Straight Tail Piece - 0835005Plb - 9-0835005Plbf1
Includes: thru-hull, hose adapter, drain plug, four pre-drilled mounting holes and bonding screw. Incorporates a plastic ball and seat assuring a tight seal and ease of operation and drain plugs for winterizing. Handles are easily removed. Overall height is measured from the top of the hose adapter to the bottom of the flange.
3/4" Hose X 1/2 Pipe Male Hose Barb - 32022 - 38-32022F1
Temperature and working pressure ranges - From -400F to +1600F at 150 PSI maximum. NOT TO BE USED IN POTABLE WATER SYSTEMS.
3/4" Hose X 3/4 Pipe Male Hose Barb - 32023 - 38-32023F1
Temperature and working pressure ranges - From -400F to +1600F at 150 PSI maximum. NOT TO BE USED IN POTABLE WATER SYSTEMS.
3/4" Inline Non-Return Valve - Lv1219 - 698-Lv1219F1
Simple way to maintain prime in a suction or discharge line. Designed to fit in-line. Use with manual or electric pumps.
3/4" Intake Water Strainer - 0493005Plb - 9-0493005Plbf1
Cast bronze. Designed for easy installation and cleaning. Features mounting lugs cast into both sides to assure universal mounting, four outside tie rods and a 316 stainless steel strainer basket to minimize electrolysis. Hinged lugs for cast bronze cover permit easy removal and cleaning of basket. Drain plug in bottom casting is provided for easy removal of sediment and draining for winterization. Ratio given for open area to pipe size.
3/4" Pumpguard Strainer - 36200-0000 - 6-362000000F1
Keeps debris from clogging pump. Runs clearer, longer with less repairs. Clear plastic housing for quick inspection. One screw disassembly and easy cleaning of 1/16" mesh stainless steel screen. Recommended for use with "pressure Max" water pressure system. No mounting is required, just cut intake line and insert.
3/4" Scoop Thru Hull W/Nut - 0065Dp5Plb - 9-0065Dp5Plbf1
Cast bronze. Screw size is #8. Strainer is 3" x 4", except for 65DP7PLB which is 3-1/4" x 4-1/4". Includes nut. UL Listed. NOT TO BE USED IN POTABLE WATER SYSTEMS.
3/4" Scoop Thru-Hull W/Nut - Sth-75-W - 34-Sth75Wf1
Includes locking nut. NOT TO BE USED IN POTABLE WATER SYSTEMS.
3/4" Shut-Off Full Flow Ball Valve - 77-104-10 - 37-7710410F1
Comes with mounting pads. Use where full flow is required. Bronze body. Chromium plated ball. Reinforced TFE seats & stuffing box ring. Blow out stem design. Stainless steel lever and nut. Meets WW-V-35C Type II. BRZ style type. Made in U.S.A. NOT TO BE USED IN POTABLE WATER SYSTEMS.
3/4" Thru-Hull With Nut - Th-75-W - 34-Th75Wf1
Should have threaded portion cut to proper length considering hull and butt block thickness. Consider thread depth when using a seacock. Sealant is recommended between hull and thru-hull flange. Includes nut.NOT TO BE USED IN POTABLE WATER SYSTEMS.
3/4" White Plastic Thru-Hull W/Broad Flange - 18050 - 50-18050F1
Molded plastic with broad flange. Per ABYC "Safety Standards for Small Craft". Not recommended for use below the waterline.
3/4X1/2 Bronze Reducing Coupling - 44438 - 38-44438F1
Bronze and imported. NOT TO BE USED IN POTABLE WATER SYSTEMS.
3/8 Brass Sq Head Pipe Plug - 28086 - 38-28086F1
Imported. NOT TO BE USED IN POTABLE WATER SYSTEMS.
3/8 Bronze 90 Deg Street Ell - 44162 - 38-44162F1
Bronze 90°, male/female threads. NOT TO BE USED IN POTABLE WATER SYSTEMS.
3/8 Bronze Pipe Cap - 44472 - 38-44472F1
Bronze NOT TO BE USED IN POTABLE WATER SYSTEMS.
3/8 Bronze Pipe Coupling - 44412 - 38-44412F1
Bronze and imported. NOT TO BE USED IN POTABLE WATER SYSTEMS.
3/8 Bronze Pipe Tee - 44252 - 38-44252F1
Bronze and imported. NOT TO BE USED IN POTABLE WATER SYSTEMS.
3/8 Fp Tee Pvc Pipe Fittings - 805-003 - 38-805003F1
3/8 X 1/4 Bronze Hex Bushing - 44502 - 38-44502F1
Bronze hex head. NOT TO BE USED IN POTABLE WATER SYSTEMS.
3/8" Ball Valve W/ Ss Lever - 70-102-10 - 37-7010210F1
Cast bronze with a stainless steel handle and stem nut. Ball is chrome plated for long lasting corrosion resistance. Reinforced TFE seats and stuffing box ring.Made in U.S.A. NOT TO BE USED IN POTABLE WATER SYSTEMS.
3/8" Brass Hose Splicer - 32095 - 38-32095F1
3/8" Brass Hose Splicer NOT TO BE USED IN POTABLE WATER SYSTEMS.
3/8" Bronze 45 Degree Street Elbow - 44202 - 38-44202F1
3/8" Bronze 45 Degree Street Elbow NOT TO BE USED IN POTABLE WATER SYSTEMS.
3/8" Hose X 1/2 Pipe Male Hose Barb - 32014 - 38-32014F1
Temperature and working pressure ranges - From -400F to +1600F at 150 PSI maximum. NOT TO BE USED IN POTABLE WATER SYSTEMS.
3/8" Hose X 1/4 Pipe Female Hose Barb - 32058 - 38-32058F1
3/8" Hose x 1/4 Pipe Female Hose Barb NOT TO BE USED IN POTABLE WATER SYSTEMS.
3/8" Hose X 1/4 Pipe Male Hose Barb - 32012 - 38-32012F1
Temperature and working pressure ranges - From -400F to +1600F at 150 PSI maximum. NOT TO BE USED IN POTABLE WATER SYSTEMS.
3/8" Hose X 1/8 Pipe Male Hose Barb - 32011 - 38-32011F1
Temperature and working pressure ranges - From -400F to +1600F at 150 PSI maximum. NOT TO BE USED IN POTABLE WATER SYSTEMS.
3/8" Hose X 3/8 Pipe Female Hose Barb - 32059 - 38-32059F1
3/8" Hose x 3/8 Pipe Female Hose Barb NOT TO BE USED IN POTABLE WATER SYSTEMS.
3/8" Hose X 3/8 Pipe Male Hose Barb - 32013 - 38-32013F1
Temperature and working pressure ranges - From -400F to +1600F at 150 PSI maximum. NOT TO BE USED IN POTABLE WATER SYSTEMS.
3/8" Shut-Off Full Flow Ball Valve - 77-102-10 - 37-7710210F1
Comes with mounting pads. Use where full flow is required. Bronze body. Chromium plated ball. Reinforced TFE seats & stuffing box ring. Blow out stem design. Stainless steel lever and nut. Meets WW-V-35C Type II. BRZ style type. Made in U.S.A. NOT TO BE USED IN POTABLE WATER SYSTEMS.
3/8" Stainless Steel Bow Shackle, Carded - 147010-1 - 354-1470101F1
Constructed of investment cast 316 stainless the D style shackle has straight sides with a U-shape rounded bottom. Designed for rigging applications with bidirectional loads. The U-shaped end can handle heavy loads, loads on the straight sides, however, may cause bending. We do not load rate cast shackles.
3/8X1/4 Bronze Reducing Coupling - 44432 - 38-44432F1
Bronze and imported. NOT TO BE USED IN POTABLE WATER SYSTEMS.
308 Piece Stainless Steel Fastener Display - Dp308Sc - 50-01991F1
Kit Includes: Variety of popular fastener types and sizes. See seachoice.com for a complete listing(3) Unit Header Signs - Model 01979(1) Bin Labels(2) 18 Drawer Clear Cabinets - Model 01986(3) 13 Shelf Units - Model 01987(12 cases of 24) Blue Bins - Model 01988(12 cases of 24) Bin Dividers - Model 0198913 Shelf Units are manufactured from high-grade, 22-gauge steel with a powder-coated finish. Assembly required: units are easily assembled with the included hardware, and include adjustable shelves w/clips. Capacity: 500 lbs. per shelf.
3161Wf Stainless Steel Fender Washers, 100, #10/Box - 5057-394 - 828-3161Wff1
18-8 stainless steel.
341Fw Stainless Steel Flat Washers, 3/4", 20/Box - 5055-226 - 828-341Fwf1
18-8 stainless steel.
34X361Tr Stainless Steel Threaded Rod, 3/4" X 36" - 5091-326 - 828-34X361Trf1
18-8 stainless steel.
381Fw Stainless Steel Flat Washers, 3/8", 100/Box - 5055-218 - 828-381Fwf1
18-8 stainless steel.
381Hn Stainless Steel Hex Nuts, 3/8", 100/Box - 5026-018 - 828-381Hnf1
18-8 stainless steel.
381Hnf Stainless Steel Hex Nuts, 3/8" Nf, 100/Box - 5027-018 - 828-381Hnff1
18-8 stainless steel.
381Ln Stainless Steel Nyloc Nuts, 3/8" Nc, 100/Box - 5034-018 - 828-381Lnf1
18-8 stainless steel.
381Lw Stainless Steel Lock Washers, 3/8", 100/Box - 5058-018 - 828-381Lwf1
18-8 stainless steel.
381Wf Stainless Steel Fender Washers, 100, 3/8"/Box - 5057-398 - 828-381Wff1
18-8 stainless steel.
38X361Tr Stainless Steel Threaded Rod, 3/8" X 36" - 5091-318 - 828-38X361Trf1
18-8 stainless steel.
38X361Trf Stainless Steel Threaded Rod, 3/8" X 36" - 5091-518 - 828-38X361Trff1
18-8 stainless steel.
38X721Tr Stainless Steel Threaded Rod, 3/8" X 72" - 5091-358 - 828-38X721Trf1
18-8 stainless steel.
3In Termination Valve - 66N4Mdvam - 135-66N4Mdvamf1
3M 16124 28 Oz. Cup W/Pressure Hose - 16124 - 71-16124F1
Large pressure cup with pressure hose port
3M 29890 Ct Suction Hose Plug-It D32, 32 Ft - 7100098170 - 71-29890F1
Suction hose is suitable for sanding applicationsAccessory comes complete with rotating adapter and reducing sleeve with bayonet fittingHose resists temperatures to 158°F (70°C)Anti-static properties are designed with technician safety in mindFlexible hose makes job easier for automotive techniciansFestool CT Suction Hose Plug-It helps control dust when working with power tools having D27 and D36 flanges (all Festool power tools) and cleaning accessories. This suction hose comes with a rotating adapter and reducing sleeve with a bayonet fitting. Designed for high temperature environments, the hose resists temperatures to 158°F (70°C). Control Sanding DustWith a rotating adapter and tool end connector, Festool CT Suction Hose Plug-It has been specifically designed for sanding applications. This suction hose offers a 3-in-1 combination of smooth and tough protective cover, anti-static suction hose and a plug-it cable to deliver professional quality results. Anti-Static Property for Safety and ConvenienceTo achieve a cleaner work environment, Festool CT Suction Hose Plug-It offers anti-static properties to help prevent dust from accumulating on the exterior of the hose. Anti-static properties also help you work more safely by preventing static discharge or shocks. Plus, you'll work more efficiently with a system that prevents clogging due to particulate buildup inside the hose.
3M 29892 Y-Piece Adapter, Anti-Static - 7100098143 - 71-29892F1
Y-Adapter allows for more efficient work Adapter offers option of connecting two suction hosesSet includes one Y-adapter with blanking plugBlanking plug caps off unused inletAnti-static properties offer safety and cleanlinessFestool Y-Piece Adapter, Anti-Static boosts productivity and efficiency by connecting two suction hoses at once. Set includes a blanking plug to cap off unused inlet, ensuring full suction of the active line
3M™ 26839 Performance Spray Gun Ball Valve - 26839 - 71-26839F1
Use with the 3M™ Performance Spray Gun, an innovative solution designed with the industrial painter in mind. Made from an impact-resistant composite, it is one of the lightest spray guns in the industry, yet durable enough for demanding industrial conditions. Its versatile design allows painters to spray from a pressurized source or a gravity cup, and replaceable atomizing heads allow you to spray a full range of coatings while delivering like-new performance with every new nozzle. Ball valve lets the painter stop fluid flow to spray gunAttaches between whip hose and supply hose in a pressure feed configurationSeals are compatible with both solvent-based and waterborne coatingsAllows for spray gun removal or nozzle replacement without disabling the pressure source
4-3/4" Stainless Steel Snap Hook - 151620-1 - 354-1516201F1
These carabiners feature an interlocking spring-loaded gate snap for quick attachment to a wide range of fixing points. Constructed of formed 316 stainless steel for corrosion resistance and durability. Multi-functional they can be used for lifting, rigging, and anchoring applications. For use with ropes, chains, straps, and small diameter cable.
4-Pin To 12-Pin Adapter Cable Adapter Cable - 010-12718-00 - 322-0101271800F1
4-Pin To 8-Pin Adapter Cable - 010-12721-00 - 322-0101272100F1
4-Rod Stainless Steel Rod Hanger Rack - F16-2752-1 - 236-F1627521F1
Rod-tip spring design securely locks rods in positon. Easy to install UV stabilized polyethylene racks available in two sizes for convenient 2-rod and 4-rod storage. Pre-drilled recessed mounting holes and beveled edges for clean, attractive look.Can be mounted horizontally, vertically or overheadSpring locking rod tip holderPolished stainless steel/Delrin rod hanger componentsUV-stabilized poly racks w/beveled edges offer a finished look
4" Continuous Heavy Duty Blower W/Flangemount, 12V - 35760-0092 - 6-357600092F1
Continuous heavy duty blowers have a minimum life of 10,000 hours, making them ideal for general engine room or genset enclosure ventilation. They are also well suited for general ventilation of head or galley areas and any application that requires regular extended operation. Rated at 250 CFM .
4" Continuous Heavy Duty Blower W/Flexmount, 12V - 35770-0092 - 6-357700092F1
Continuous heavy duty blowers have a minimum life of 10,000 hours, making them ideal for general engine room or genset enclosure ventilation. They are also well suited for general ventilation of head or galley areas and any application that requires regular extended operation. Rated at 250 CFM .
4" Exhaust Thru-Hull, Black W/Flapper - 1200325 - 383-1200325F1
4" Exhaust Thru-Hull, White W/Flapper - 1200326 - 383-1200326F1
4" Round Bronze Strainer For 1-1/4" & 1-1/2" T-Hulls - 0086Dp4Plb - 9-0086Dp4Plbf1
Cast bronze. Screw size is #8. UL Listed. NOT TO BE USED IN POTABLE WATER SYSTEMS.
4" Round Strainer - 00Sr400 - 379-00Sr400F1
Cast bronze.
4" Stainless Steel Snap Hook - 151600 - 354-151600F1
These carabiners feature an interlocking spring-loaded gate snap for quick attachment to a wide range of fixing points. Constructed of formed 316 stainless steel for corrosion resistance and durability. Multi-functional they can be used for lifting, rigging, and anchoring applications. For use with ropes, chains, straps, and small diameter cable.
4" Stainless Steel Snap Hook - 151600-1 - 354-1516001F1
These carabiners feature an interlocking spring-loaded gate snap for quick attachment to a wide range of fixing points. Constructed of formed 316 stainless steel for corrosion resistance and durability. Multi-functional they can be used for lifting, rigging, and anchoring applications. For use with ropes, chains, straps, and small diameter cable.
41Fw Stainless Steel Flat Washers, #4, 100/Box - 5055-204 - 828-41Fwf1
18-8 stainless steel.
4401Ln Stainless Steel Nyloc Nuts, 4-40, 100/Box - 5034-004 - 828-4401Lnf1
18-8 stainless steel.
5" Round Bronze Strainer For 2" T-Hulls - 0086Dp5Plb - 9-0086Dp5Plbf1
Cast bronze. Screw size is #8. UL Listed. NOT TO BE USED IN POTABLE WATER SYSTEMS.
5" Round Strainer - 00Sr500 - 379-00Sr500F1
Cast bronze.
5/16" Brass Hose Splicer - 32094 - 38-32094F1
5/16" Brass Hose Splicer NOT TO BE USED IN POTABLE WATER SYSTEMS.
5/16" Hose X 1/4 Pipe Male Hose Barb - 32009 - 38-32009F1
Temperature and working pressure ranges - From -400F to +1600F at 150 PSI maximum. NOT TO BE USED IN POTABLE WATER SYSTEMS.
5/16" Hose X 1/8 Pipe Male Hose Barb - 32008 - 38-32008F1
Temperature and working pressure ranges - From -400F to +1600F at 150 PSI maximum. NOT TO BE USED IN POTABLE WATER SYSTEMS.
5/16" Hose X 3/8 Pipe Male Hose Barb - 32010 - 38-32010F1
Temperature and working pressure ranges - From -400F to +1600F at 150 PSI maximum. NOT TO BE USED IN POTABLE WATER SYSTEMS.
5/16" Stainless Steel Bow Shackle, Carded - 147008-1 - 354-1470081F1
Constructed of investment cast 316 stainless the D style shackle has straight sides with a U-shape rounded bottom. Designed for rigging applications with bidirectional loads. The U-shaped end can handle heavy loads, loads on the straight sides, however, may cause bending. We do not load rate cast shackles.
5/8 Clear Bilge Bx 50' Bilge/Livewell Fda Clear W/ Plastic Helix - 147-0586 - 606-1470586F1
5/8 I.D. Female Garden Hose - 30033 - 38-30033F1
All brass corrugated hose couplings. Repair for any type hose - plastic, rubber and high pressure. Tight, leakproof connection quickly and easily made with any hose clamp. NOT TO BE USED IN POTABLE WATER SYSTEMS.
