Hydraulic Steering
Port Cylinder W/Straight Arm Silversteer Uflex Uc128 - Uc128Ts-Svs 1P - 216-Uc128Tssvs1Pf1
Port Cylinder W/Offset Arm Silversteer Uflex Uc128 - Uc128Ts-Svs 2P - 216-Uc128Tssvs2Pf1
Pontoon Reclining Helm-Slate - 3126-1890 - 144-31261890F1
Pivots 30 Series 1/4" Dia - 31539 - 1-031539F1
Pivot for 3300 series cables
Pivot Kit - Ca27563P - 1-Ca27563Pf1
Brass. Heavy duty. Fits Teleflex Morse and other control cables with 10-32 ends. Kit contains 2 each of pivot end, bushing, cotter pin and washer. For use on CH4400 or CH5600 series controls.
Pivot 40 Series - 39110 - 1-039110F1
Pivot for 4300 series cables
Pivot 30 Series 1/4" Dia - 39890 - 1-039890F1
Pivot for 3300 series cables
Pivot 30 Series - 37691 - 1-037691F1
Pivot for 3300 series cables
Pivot 30 Ser 1/4" Dia - 31029 - 1-031029F1
Pivot for 3300 series cables
Panther Xps Power Steering System - 10-7200 - 781-107200 Superseded By: 781-109700F1
The Panther Power Steering (XPS) system combines the durability and dependability of cable steering with the ease of power hydraulic steering at a price point geared toward the recreational boater. The cable steering acts as a safety back-up in the event of power or hydraulic system failure. Decreases steering effort, eliminates prop torque simply making steering a boat, with an outboard engine much easier. This unique system features 'stored Power' using an accumulator that delivers high pressure hydraulic fluid to the patented cylinder so the pump only operates when the volume of fluid in the accumulator drops to a predetermined level--typically, less than 10% of the time that the engine is running. This limited run time' is a huge power saver which significantly reduces the risk of a 'dead' cranking battery.
Panther 106124 Xps Power Steering Hose Kit, 24' - 10-6124 - 781-106124F1
The hose kit contains two hoses - high pressure and low pressure - with fittings. The low-pressure hose is 12" longer to allow for uninterrupted travel when connected to the cylinder actuator. (One hose kit is needed per system.)
Panther 106122 Xps Power Steering Hose Kit, 22' - 10-6122 - 781-106122F1
The hose kit contains two hoses - high pressure and low pressure - with fittings. The low-pressure hose is 12" longer to allow for uninterrupted travel when connected to the cylinder actuator. (One hose kit is needed per system.)
Panther 106120 Xps Power Steering Hose Kit, 20' - 10-6120 - 781-106120F1
The hose kit contains two hoses - high pressure and low pressure - with fittings. The low-pressure hose is 12" longer to allow for uninterrupted travel when connected to the cylinder actuator. (One hose kit is needed per system.)
Panther 106118 Xps Power Steering Hose Kit, 18' - 10-6118 - 781-106118F1
The hose kit contains two hoses - high pressure and low pressure - with fittings. The low-pressure hose is 12" longer to allow for uninterrupted travel when connected to the cylinder actuator. (One hose kit is needed per system.)
Panther 106116 Xps Power Steering Hose Kit, 16' - 10-6116 - 781-106116F1
The hose kit contains two hoses - high pressure and low pressure - with fittings. The low-pressure hose is 12" longer to allow for uninterrupted travel when connected to the cylinder actuator. (One hose kit is needed per system.)
Panther 106114 Xps Power Steering Hose Kit, 14' - 10-6114 - 781-106114F1
The hose kit contains two hoses - high pressure and low pressure - with fittings. The low-pressure hose is 12" longer to allow for uninterrupted travel when connected to the cylinder actuator. (One hose kit is needed per system.)
Panther 106112 Xps Power Steering Hose Kit, 12' - 10-6112 - 781-106112F1
The hose kit contains two hoses - high pressure and low pressure - with fittings. The low-pressure hose is 12" longer to allow for uninterrupted travel when connected to the cylinder actuator. (One hose kit is needed per system.)
Panther 106110 Xps Power Steering Hose Kit, 10' - 10-6110 - 781-106110F1
The hose kit contains two hoses - high pressure and low pressure - with fittings. The low-pressure hose is 12" longer to allow for uninterrupted travel when connected to the cylinder actuator. (One hose kit is needed per system.)
Panther 106108 Xps Power Steering Hose Kit, 8' - 10-6108 - 781-106108F1
The hose kit contains two hoses - high pressure and low pressure - with fittings. The low-pressure hose is 12" longer to allow for uninterrupted travel when connected to the cylinder actuator. (One hose kit is needed per system.)
Panther 106107 Xps Power Steering Hose Kit, 7' - 10-6107 - 781-106107F1
The hose kit contains two hoses - high pressure and low pressure - with fittings. The low-pressure hose is 12" longer to allow for uninterrupted travel when connected to the cylinder actuator. (One hose kit is needed per system.)
Panther 100205 Full Synthetic Power Steering Fluid, Qt. - 100205 - 781-100205F1
Engineered specifically for Panther's Power Steering systems. It is designed for optimal functionality in all seasons. The full synthetic chemistry and high viscosity index ensure extended life performance across a wide temperature range. Formulated with synthetic base stock and premium additives. Includes additives to inhibit rust and corrosion and provide excellent anti-wear characteristics.
Op12 Autopilot Controller - 000-13287-001 - 941-00013287001F1
Onyx 13700070199916 Inflatable Life Jacket Replacement Co2 Cylinder, 16 Grams - 137000-701-999-16 - 116-13700070199916F1
Inflatable life jackets can be reused after each inflation but the CO2 cylinder needs to be replaced before using again. Use an Onyx rearming kit to keep yours ready. It is recommended to purchase an extra rearming kit to try out your inflatable life jacket and become familiar with its operation. Be sure your inflatable PFD is properly armed and ready to use before you head out on the water. Always read your Owner's Manual for the proper way to initially arm your life jacket with the CO2 cartridge, and how to re-arm it after it has been inflated. Instructional videos available at Onyxoutdoor.com.
Onyx 13630070199919 Inflatable Life Jacket Replacement Co2 Cylinder, 33 Grams - 136300-701-999-19 - 116-13630070199919F1
Inflatable life jackets can be reused after each inflation but the CO2 cylinder needs to be replaced before using again. Use an Onyx rearming kit to keep yours ready. It is recommended to purchase an extra rearming kit to try out your inflatable life jacket and become familiar with its operation. Be sure your inflatable PFD is properly armed and ready to use before you head out on the water. Always read your Owner's Manual for the proper way to initially arm your life jacket with the CO2 cartridge, and how to re-arm it after it has been inflated. Instructional videos available at Onyxoutdoor.com.
Onyx 13620070199913 Inflatable Life Jacket Replacement Co2 Cylinder, 33 Grams - 136200-701-999-13 - 116-13620070199913F1
Inflatable life jackets can be reused after each inflation but the CO2 cylinder needs to be replaced before using again. Use an Onyx rearming kit to keep yours ready. It is recommended to purchase an extra rearming kit to try out your inflatable life jacket and become familiar with its operation. Be sure your inflatable PFD is properly armed and ready to use before you head out on the water. Always read your Owner's Manual for the proper way to initially arm your life jacket with the CO2 cartridge, and how to re-arm it after it has been inflated. Instructional videos available at Onyxoutdoor.com.
Onyx 13570070199919 Inflatable Life Jacket Replacement Co2 Cylinder, 24 Grams - 135700-701-999-19 - 116-13570070199919F1
Inflatable life jackets can be reused after each inflation but the CO2 cylinder needs to be replaced before using again. Use an Onyx rearming kit to keep yours ready. It is recommended to purchase an extra rearming kit to try out your inflatable life jacket and become familiar with its operation. Be sure your inflatable PFD is properly armed and ready to use before you head out on the water. Always read your Owner's Manual for the proper way to initially arm your life jacket with the CO2 cartridge, and how to re-arm it after it has been inflated. Instructional videos available at Onyxoutdoor.com.
Onyx 13520070199912 Inflatable Life Jacket Replacement Co2 Cylinder, 24 Grams - 13520070199912 - 116-13520070199912F1
Inflatable life jackets can be reused after each inflation but the CO2 cylinder needs to be replaced before using again. Use an Onyx rearming kit to keep yours ready. It is recommended to purchase an extra rearming kit to try out your inflatable life jacket and become familiar with its operation. Be sure your inflatable PFD is properly armed and ready to use before you head out on the water. Always read your Owner's Manual for the proper way to initially arm your life jacket with the CO2 cartridge, and how to re-arm it after it has been inflated. Instructional videos available at Onyxoutdoor.com.
Onyx 13510070199923 Inflatable Life Jacket Replacement Co2 Cylinder, 24 Grams - 13510070199923 - 116-13510070199923F1
Inflatable life jackets can be reused after each inflation but the CO2 cylinder needs to be replaced before using again. Use an Onyx rearming kit to keep yours ready. It is recommended to purchase an extra rearming kit to try out your inflatable life jacket and become familiar with its operation. Be sure your inflatable PFD is properly armed and ready to use before you head out on the water. Always read your Owner's Manual for the proper way to initially arm your life jacket with the CO2 cartridge, and how to re-arm it after it has been inflated. Instructional videos available at Onyxoutdoor.com.
Onyx 13500070199912 Inflatable Life Jacket Replacement Co2 Cylinder, 24 Grams - 135000-701-999-12 - 116-13500070199912F1
Inflatable life jackets can be reused after each inflation but the CO2 cylinder needs to be replaced before using again. Use an Onyx rearming kit to keep yours ready. It is recommended to purchase an extra rearming kit to try out your inflatable life jacket and become familiar with its operation. Be sure your inflatable PFD is properly armed and ready to use before you head out on the water. Always read your Owner's Manual for the proper way to initially arm your life jacket with the CO2 cartridge, and how to re-arm it after it has been inflated. Instructional videos available at Onyxoutdoor.com.
Omc/Johnson/Evinrude Connection Kit - Ca27247P - 1-Ca27247Pf1
This kit is for use with CC170 series cables, over 35HP, 1973-1978.
Omc Cable Kit - 301729 - 1-301729F1
Kit adapts 33C or 33C supreme for use with Evinrude/Johnson 55-235HP 1978 to 1985, 20HP and up in 1986, 20-25-30HP motors may need OMC kit 397488.
Oil Cooler Power Steering Ss<8M0152028 - 8M0181740 - 710-8M0181740F1
Octopus Hydraulic Steering Fluid, Qt., 12/Case - Octoil1Usq - 491-Octoil1Usqf1
Engineered for use in all Hydraulic Steering systems ISO 15 low temp mineral hydraulic fluidCorrosion inhibitedOxidation ResistantExcellent anti-wear performance
Octopus Hydraulic Steering Fluid, Gal., 4/Case - Octoil1Usg - 491-Octoil1Usgf1
Engineered for use in all Hydraulic Steering systems ISO 15 low temp mineral hydraulic fluidCorrosion inhibitedOxidation ResistantExcellent anti-wear performance
Octopus Hydraulic Linear Drive, 12V, 7" Stroke, W/Remote Pump - Octaf1012Lar7 - 491-Octaf1012Lar7F1
Powerful, low current consumption hydraulic linear drives designed for long passage making. Using Octopus piston pumps that are three times more efficient than a gear pumps and can be expected to halve the battery consumption doubling the effective range of the autopilot on one battery charge. Octopus variable flow rate precisely controls the speed of the ram, reducing battery consumption, pressure, strain and wear on the hydraulic system. Available either with the pump mounted on the cylinder or mounted separately. Octopus linear drives are available with a large range of stroke and pump sizesDrives are suitable for boats up to 80ft (24.4m) - 44,000lbs (20,000kg)Remote mount pump
Octopus Hydraulic Linear Drive, 12V, 12" Stroke, W/Remote Pump - Octaf2012Lar12 - 491-Octaf2012Lar12F1
Powerful, low current consumption hydraulic linear drives designed for long passage making. Using Octopus piston pumps that are three times more efficient than a gear pumps and can be expected to halve the battery consumption doubling the effective range of the autopilot on one battery charge. Octopus variable flow rate precisely controls the speed of the ram, reducing battery consumption, pressure, strain and wear on the hydraulic system. Available either with the pump mounted on the cylinder or mounted separately. Octopus linear drives are available with a large range of stroke and pump sizesDrives are suitable for boats up to 80ft (24.4m) - 44,000lbs (20,000kg)Remote mount pump
Octopus Hydraulic Linear Drive, 12V, 12" Stroke, W/Remote Pump - Octaf1212Lar12 - 491-Octaf1212Lar12F1
Powerful, low current consumption hydraulic linear drives designed for long passage making. Using Octopus piston pumps that are three times more efficient than a gear pumps and can be expected to halve the battery consumption doubling the effective range of the autopilot on one battery charge. Octopus variable flow rate precisely controls the speed of the ram, reducing battery consumption, pressure, strain and wear on the hydraulic system. Available either with the pump mounted on the cylinder or mounted separately. Octopus linear drives are available with a large range of stroke and pump sizesDrives are suitable for boats up to 80ft (24.4m) - 44,000lbs (20,000kg)Remote mount pump
Octopus Hydraulic Linear Drive, 12V, 12" Stroke, W/Mounted Pump - Octaf1212Lam12 - 491-Octaf1212Lam12F1
Powerful, low current consumption hydraulic linear drives designed for long passage making. Using Octopus piston pumps that are three times more efficient than a gear pumps and can be expected to halve the battery consumption doubling the effective range of the autopilot on one battery charge. Octopus variable flow rate precisely controls the speed of the ram, reducing battery consumption, pressure, strain and wear on the hydraulic system. Available either with the pump mounted on the cylinder or mounted separately. Octopus linear drives are available with a large range of stroke and pump sizesDrives are suitable for boats up to 80ft (24.4m) - 44,000lbs (20,000kg)Standard drives are available with the pump either mounted on the ram or separately
Nfb™ Saft-T Ii Rotary™ Helm - Sh5150P - 1-Sh5150Pf1
Collet & hitch pin secure QC cable to helmOne bolt holds spent travel tube
Nfb™ Rack & Nfb™ Pro Rack™ - Backmount - Sh5230P - 1-Sh5230Pf1
Four bolts and nuts secure cable's rack housing to helmDual cable has one rack housing with two cables attached. Single helm works on both single and dual cable applications. Helm requires current generation rack cables (will not bolt up to older style cables)Helm has No FeedBack™ featureHelm/cable install as unit from back of dashFits: SS151XX (NFB Rack Single Cable), SS152XX (NFB Pro Rack Dual Cable)
Nfb™ 4.2 Steering Helm, Single - Sh4910P - 1-Sh4910Pf1
Two bolts secure QC cable to helmOne bolt holds spent travel tube.No feedback feature
Nfb™ 4.2 Steering Helm, Dual - Sh4920P - 1-Sh4920Pf1
Two bolts secure QC cable to helmOne bolt holds spent travel tube.No feedback feature
Nfb 4.2 Tilt Helm - Sh91526P - 1-Sh91526Pf1
Single cable No Feedback tilt helm. For engnies up to V6 where single cable steering is used. Requires separate tilt mechanism SH91800P.
Neutral Safety Switch - 300928 - 1-300928F1
For use with CH4400 series controls.
Neut. Safety Switch Kit Ch4400 - Ca68075P - 1-Ca68075Pf1
For use with CH4400 series controls.
Nac-3 Autopilot Computer Replaces P/N 941-00013250001 - 000-13250-001 - 149-00013250001F1
Nac-2 Autopilot Computer Replaces P/N 941-00013249001 - 000-13249-001 - 149-00013249001F1
Mounting Hardware Only For Steering Wheels - Sa27454P - 1-Sa27454Pf1
Morse Pivot-40 Series - 31537 - 1-031537F1
Pivot for 4300 series cables
Morse Pivot-30 Series - 39471 - 1-039471F1
Pivot for 3300 series cables
Minn Kota 1854074 Ultrex Lift Assist Cylinder For Ultrex™ Quest™ Series W/ 52" Shaft - 1854074 - 27-1854074F1
These replacement lift assist cylinders for Ultrex trolling motors account for the added weight of aftermarket Humminbird transducers being added to the shaft of these motors. Compatible only with both Mega 360 and Mega LIVE TargetLock, these replacement cylinders restore the original effect of the lift assist bracket in their associated motors. Increases effect of lift-assist for motors equipped with both Humminbird® MEGA Live Imaging TargetLock™ as well as Humminbird® MEGA 360 Imaging™Reduces effort required for motor stow and deployReplaces factory standard lift assist cylinder
Minn Kota 1854073 Ultrex Lift Assist Cylinder For Ultrex™ Quest™ Series W/ 45" Shaft - 1854073 - 27-1854073F1
These replacement lift assist cylinders for Ultrex trolling motors account for the added weight of aftermarket Humminbird transducers being added to the shaft of these motors. Compatible only with both Mega 360 and Mega LIVE TargetLock, these replacement cylinders restore the original effect of the lift assist bracket in their associated motors. Increases effect of lift-assist for motors equipped with both Humminbird® MEGA Live Imaging TargetLock™ as well as Humminbird® MEGA 360 Imaging™Reduces effort required for motor stow and deployReplaces factory standard lift assist cylinder
Minn Kota 1854072 Ultrex Lift Assist Cylinder For 36V, 112Lb Ultrex™ W/ 45" Shaft - 1854072 - 27-1854072F1
These replacement lift assist cylinders for Ultrex trolling motors account for the added weight of aftermarket Humminbird transducers being added to the shaft of these motors. Compatible only with both Mega 360 and Mega LIVE TargetLock, these replacement cylinders restore the original effect of the lift assist bracket in their associated motors. Increases effect of lift-assist for motors equipped with both Humminbird® MEGA Live Imaging TargetLock™ as well as Humminbird® MEGA 360 Imaging™Reduces effort required for motor stow and deployReplaces factory standard lift assist cylinder
Minn Kota 1854071 Ultrex Lift Assist Cylinder For 24V, 80Lb / 36V, 112Lb Ultrex™ W/ 52" Shaft - 1854071 - 27-1854071F1
These replacement lift assist cylinders for Ultrex trolling motors account for the added weight of aftermarket Humminbird transducers being added to the shaft of these motors. Compatible only with both Mega 360 and Mega LIVE TargetLock, these replacement cylinders restore the original effect of the lift assist bracket in their associated motors. Increases effect of lift-assist for motors equipped with both Humminbird® MEGA Live Imaging TargetLock™ as well as Humminbird® MEGA 360 Imaging™Reduces effort required for motor stow and deployReplaces factory standard lift assist cylinder
Minn Kota 1854070 Ultrex Lift Assist Cylinder For 24V, 80Lb Ultrex™ W/ 45" Shaft - 1854070 - 27-1854070F1
These replacement lift assist cylinders for Ultrex trolling motors account for the added weight of aftermarket Humminbird transducers being added to the shaft of these motors. Compatible only with both Mega 360 and Mega LIVE TargetLock, these replacement cylinders restore the original effect of the lift assist bracket in their associated motors. Increases effect of lift-assist for motors equipped with both Humminbird® MEGA Live Imaging TargetLock™ as well as Humminbird® MEGA 360 Imaging™Reduces effort required for motor stow and deployReplaces factory standard lift assist cylinder
Mercury Verado 6-Cylinder Anode Kit - Magnesium - Cmverado6Kitm - 194-Cmverado6Kitmf1
Mercury Verado anode kits. Comes complete with anodes, hardware and install instructions. Includes:CM880653 PlateCM892227 Power TrimCM826134 WedgeCM762145 Prop Nut
Mercury Verado 6-Cylinder Anode Kit - Aluminum - Cmverado6Kita - 194-Cmverado6Kitaf1
Mercury Verado anode kits. Comes complete with anodes, hardware and install instructions. Includes:CM880653 PlateCM892227 Power TrimCM826134 WedgeCM762145 Prop Nut
Mercury Verado 4-Cylinder Anode Kit - Aluminum - Cmverado4Kita - 194-Cmverado4Kitaf1
Mercury Verado anode kits. Comes complete with anodes, hardware and install instructions. Includes:CM818298 Transom BarCM826134 Wedge (2)CM762145 Prop Nut
Mercury 92-858076K01 Synthetic Power Steering Fluid Sae 0W-30, 8 Oz. - 858076K01 - 710-92-858076K01F1
Recommended for electric power steering systems such as Verado.Recommended for transmission and steering and actuator systems for Zeus drivesAvailable to authorized Mercury dealers only. Sold only in case packs. Recommended for electric power steering systems such as Verado.Recommended for transmission and steering and actuator systems for Zeus drives Available to authorized Mercury dealers only. Sold only in case packs.
Mercruiser Engine Connection Kit - 302123 - 1-302123F1
For 3300/33C style cables
Master Drive™ Packaged Power Steering System - Outboard, 40Cc W/Tilt - Md40T - 216-Md40Tf1
Just like in your car, the MasterDrive 12 volt power assist steering system delivers effortless steering with fingertip control regardless of speed or torque conditions. It completely eliminates torque at the steering wheel, while providing the safety of functional manual hydraulic steering in the event of a loss of power. Patented features include 3 selectable levels of power to give the desired feeling at the wheel. The ignition protected, high-efficiency, low amp draw motor automatically reverts to manual mode in case of power loss and is equipped with an on/off safety switch. Fully compatible with autopilot and dual station steering installations.Includes: helm, power unit with 15' wiring harness and user interface.Note: tie bars (A90 or A94) for dual engine installations, oil, Kit-OBSVSxx hydraulic hoses (helm to cylinder), Kit-OBMDxx (helm to power unit) & Kit-OB-DBR-SVSxx hose kit (for dual cylinder installations) must be ordered separately.
Master Drive™ Packaged Power Steering System - Outboard, 40Cc - Md40Fm - 216-Md40Fmf1
Just like in your car, the MasterDrive 12 volt power assist steering system delivers effortless steering with fingertip control regardless of speed or torque conditions. It completely eliminates torque at the steering wheel, while providing the safety of functional manual hydraulic steering in the event of a loss of power. Patented features include 3 selectable levels of power to give the desired feeling at the wheel. The ignition protected, high-efficiency, low amp draw motor automatically reverts to manual mode in case of power loss and is equipped with an on/off safety switch. Fully compatible with autopilot and dual station steering installations.Includes: helm, power unit with 15' wiring harness and user interface.Note: tie bars (A90 or A94) for dual engine installations, oil, Kit-OBSVSxx hydraulic hoses (helm to cylinder), Kit-OBMDxx (helm to power unit) & Kit-OB-DBR-SVSxx hose kit (for dual cylinder installations) must be ordered separately.
Master Drive™ Packaged Power Steering System - Outboard, 32Cc W/Tilt Helm - Md32T - 216-Md32Tf1
Just like in your car, the MasterDrive 12 volt power assist steering system delivers effortless steering with fingertip control regardless of speed or torque conditions. It completely eliminates torque at the steering wheel, while providing the safety of functional manual hydraulic steering in the event of a loss of power. Patented features include 3 selectable levels of power to give the desired feeling at the wheel. The ignition protected, high-efficiency, low amp draw motor automatically reverts to manual mode in case of power loss and is equipped with an on/off safety switch. Fully compatible with autopilot and dual station steering installations.Includes: helm, power unit with 15' wiring harness and user interface.Note: tie bars (A90 or A94) for dual engine installations, oil, Kit-OBSVSxx hydraulic hoses (helm to cylinder), Kit-OBMDxx (helm to power unit) & Kit-OB-DBR-SVSxx hose kit (for dual cylinder installations) must be ordered separately.
Martyr Ha5521 Tournament Drive Bracket Hardware Kit - Ha5521 - 1-Ha5521F1
The Tournament Drive Bracket kit is for use with our Adjustable Tie Bars on standard SeaStar steering cylinders. This series of hardware kits will allow the consumer to take full advantage of all the features and benefits of our heavy-duty adjustable tie bar products for twin engine applications up to 600 HP. Utilizes proven Tournament series adjustable tie barsAnodized aluminum adjustable tie bar with built in maximum stroke indicatorHigh strength forged aluminum drive bracketEliminates the need for cut-to-length traditional tie bars Shown with standard cylinder(s) and tie bar (sold separately)
Martyr Ha5520 Tournament Drive Bracket Hardware Kit - Ha5520 - 1-Ha5520F1
The Tournament Drive Bracket kit is for use with our Adjustable Tie Bars on standard SeaStar steering cylinders. This series of hardware kits will allow the consumer to take full advantage of all the features and benefits of our heavy-duty adjustable tie bar products for twin engine applications up to 600 HP. Utilizes proven Tournament series adjustable tie barsAnodized aluminum adjustable tie bar with built in maximum stroke indicatorHigh strength forged aluminum drive bracketEliminates the need for cut-to-length traditional tie bars Shown with standard cylinder(s) and tie bar (sold separately)
Lowrance 00015446002 Reversible Hydraulic Gear Pump-3, 12V - 000-15446-002 - 149-00015446002F1
Reversible hydraulic gear pump. O-Ring Boss (ORB) connections. Includes 3 x ORB-5 to 9/16 UNF fittings. SteadySteer compatible.Pump-4: For cylinder displacement of 290 - 960 cc (17.7 - 58.5 cu. in.). Requires NAC-3 / AC42.
Lowrance 00015445002 Reversible Hydraulic Gear Pump-3, 12V - 000-15445-002 - 149-00015445002F1
Reversible hydraulic gear pump. O-Ring Boss (ORB) connections. Includes 3 x ORB-5 to 9/16 UNF fittings. SteadySteer compatible.Pump-3: For cylinder displacement of 160-550 cc (9.8 - 33.5 cu.in).Requires NAC-3 / AC42.
Lowrance 00015444002 Reversible Hydraulic Gear Pump-2, 12V - 000-15444-002 - 149-00015444002F1
Reversible hydraulic gear pump. O-Ring Boss (ORB) connections. Includes 3 x ORB-5 to 9/16 UNF fittings. SteadySteer compatible.Pump-2: For cylinder displacement of 80 cc - 250 cc (4.9 - 15.2 cu.in).
Low Hp O/B Eng. Spacer - Ho5090 - 1-Ho5090F1
SeaStar outboard steering offers three models of steering cylinders to suit most applications: Front Mount, Side Mount, and Splashwell Mount.Front Mount cylinders are balanced and the most commonly used. They are designed for single engines to 350 hp and multiple outboard engine installations with total power to 700 hp in counter rotating applications. Before ordering, determine the best application for the boat based on hull design, speed, and usage.Side mount cylinders are unbalanced and offer 4.8 or 5.7 turns lock-to-lock. It is suitable for shallow splashwells and use on engines fitted with power steering. For single engines to 300 hp and multiple outboard engine installations with total power to 600 hp in counter rotating applications.Splashwell Mount cylinders are an unbalanced, light duty alternative to front & side mount with 5.5 or 6.5 turns lock-to-lock for engines with or without support tubes. For single engines to 300 hp and multiple outboard engine installations with total power to 600 hp in counter rotating applications. It can be transom or hull mounted.
Link Arm Kit Omc/Johnson/Evinrude - Sa27361P - 1-Sa27361Pf1
Kit Ss Tilt Sport -4 Hydraulic Steering Kit - Hk6400Ts-4 - 1-Hk6400Ts4F1
Kit Ss Tilt Classic -4 Swithches - Hk6400Tc-4 - 1-Hk6400Tc4F1
Johnson / Evinrude Connection Kit - Ca27208P - 1-Ca27208Pf1
This kit is for use with CC170 series cables, 35HP and below, 1973-78.
Jabsco 290512000 Pump Cylinder Assembly - 29051-2000 - 6-290512000F1
Fits 290902 & 291202 Series manual toilet.
Ironwood Pacific Helmsmate™ Tiller Extension Handle, 37"-52" W/U-Joint - 10 - 664-0010F1
Offers extended throttle and steering control while maintaining clear access to the engine's kill button. It's designed for trolling speeds only and electric or gas motors up to 15 hp.
Ironwood Pacific Helmsmate™ Tiller Extension Handle, 36"-50" Straight - 11 - 664-0011F1
Offers extended throttle and steering control while maintaining clear access to the engine's kill button. It's designed for trolling speeds only and electric or gas motors up to 15 hp.
Ironwood Pacific Helmsmate™ Tiller Extension Handle, 30" Straight - 12 - 664-0012F1
Offers extended throttle and steering control while maintaining clear access to the engine's kill button. It's designed for trolling speeds only and electric or gas motors up to 15 hp.
Ironwood Pacific Helmsmate™ Tiller Extension Handle, 18"-24" Straight - 122 - 664-00122F1
Offers extended throttle and steering control while maintaining clear access to the engine's kill button. It's designed for trolling speeds only and electric or gas motors up to 15 hp.
Ironwood Pacific Helmsmate™ Tiller Extension Handle, 18" Straight - 121 - 664-00121F1
Offers extended throttle and steering control while maintaining clear access to the engine's kill button. It's designed for trolling speeds only and electric or gas motors up to 15 hp.
Intact Drive Replaces P/N 1-Jc4500 - Jc4500 - 861-Jc4500F1
Insta Trim 12732 Nylon Cylinder Brackets, 4 Pc Set - 12732-A - 754-12732F1
Nylon cylinder brackets, 4 pc Set
Insta Trim 12730 Cylinder Pins - 12730 - 754-12730F1
Cylinder pins
Insta Trim 12728 Hydraulic Hose, Per Foot - 12728 - 754-12728F1
Hydraulic hose, per foot
Hydraulic Trim Pump Assembly W/Steel Bracket - 18-6752 - 47-6752F1
For 1983 and later Mercruiser applications w/o "quick connect".
Hydraulic Trim Pump Assembly W/Stainless Bracket - 18-6753 - 47-6753F1
For 1983 and later Mercruiser applications w/o "quick connect".
Hydraulic To Bolt Conv Kit - 6Bt-50040-42-00 - 219-Hydboltconf1
Easily converts standard Bennett hydraulic trim tab systems to Bennett BOLT electric trim tab systems. Simply replace your Bennett hydraulic actuators and pump with the new Bennett electric actuators and relay module. You will still be able to use your existing wiring, rocker control switch and trim planes for a quick and easy conversion. This kit comes equipped with Auto Tab Retraction (Tabs retract when ignition is turned off), and a sophisticated diagnostics feature, greatly simplifying installation and trouble-shooting. Contains:(2) BOLT Actuators with wire andPlug'n play connector(2) Bennett Adjustable Upper Hinges(2) Lenco-compatible Upper Hinges(2) Lenco-compatible Lower Hinges(1) Hardware Bag
Hydraulic Steering System For Mercury, Yamaha, Honda W/20' Hoses Included. - Fourtech07 - 216-Protech10H20F1
The Protech Front Mount Outboard Hydraulic Kit delivers unmatched performance and durability. Featuring the UP28FM helm with a stainless steel shaft and heavy duty seals, this system offers an incredibly efficient 4.25 turns lock to lock. The UC128 cylinder completes the system with a heavy duty cylinder rod, and a 304 electropolished and passivated stainless steel link assembly. Direct drop in replacement for competing hydraulic systems. Relief valve setting: 1000 PSI. Compatible with Teleflex/Seastar Solutions hoses and oil. Kit includes: Helm, cylinder, 20' hoses and 2 quarts of oil.Note: See engine application chart for more information.
Hydraulic Steering System For Johnson/Evinrude, Yamaha & Suzuki W/20' Hoses Included. - Protech20H20 - 216-Protech20H20F1
The Protech Front Mount Outboard Hydraulic Kit delivers unmatched performance and durability. Featuring the UP28FM helm with a stainless steel shaft and heavy duty seals, this system offers an incredibly efficient 4.25 turns lock to lock. The UC128 cylinder completes the system with a heavy duty cylinder rod, and a 304 electropolished and passivated stainless steel link assembly. Direct drop in replacement for competing hydraulic systems. Relief valve setting: 1000 PSI. Compatible with Teleflex/Seastar Solutions hoses and oil. Kit includes: Helm, cylinder, 20' hoses and 2 quarts of oil.Note: See engine application chart for more information.
Hydraulic Steering Sample Empty Bottle Only - Hydbottle - 50-Hydbottlef1
Hydraulic Steering Bleeding Adapters - Kit Ha - 216-Kithaf1
Adapter to use Uflex Bubble Buster and Teleflex/Seastar Solutions Power Purge on cylinders without quick connect bleed fittings.
Hydraulic Outboard Steering Kit W/Hose - Gotech 1.0 - 216-Gotech10F1
The GoTech 10 is an economical steering solution for pontoon boats and other boats with moderate torque that was designed to handle 4-stroke outboard engines up to 115HP. It allows you to enjoy boating without having to fight steering toque and fatigue that can occur in some mechanical steering applications. *See engine application chart for more information.Kit Includes: 1 UC81-OBF cylinder1 UP18 helm2 qts of Oil, 15 SAE30' of nylon tubing30' of nylon tubing
Hydraulic Oil, Qt. - Oil 15 - 216-Oil15F1
Specially formulated for peak steering efficiency and component longevity, aircraft grade Oil 15 from Uflex is recommended for use with all Uflex steering helms and cylinders.
Hydraulic Hose 3/4" Bulkhead Fitting Kit - R7 - 216-R7F1
3/4" bulkhead fitting kit for single cylinder installation. 2 assemblies per kit.
