Hydraulic Steering
Clevis 11/32 Thk Lever - 33395 - 1-033395F1
Fit levers with thicknesses and holes given. Length given from center of pin to barrel end.
Clevis 30 Series 1/4 Dia - 31125 - 1-031125F1
Fit levers with thicknesses and holes given. Length given from center of pin to barrel end.
Clevis 40 Series 1/4 Dia - 29025 - 1-029025F1
Fit levers with thicknesses and holes given. Length given from center of pin to barrel end.
Clips Outboard Stabilizer - Hycl-001-1 - 861-Hycl0011F1
Cmc Pt-130 Electric Hydraulic Tilt & Trim - 13002 - 119-13002F1
You get power tilt & trim, better boat handling, more speed, lower fuel consumption and no more back strain. Rated for 130 H.P. and Smaller Motors6" Set Back to Enhance Boat Stability and Performance20° of Trim and a Total of 90° of Tilt and Trim1/2" 6061 T6 Extruded Aluminum Construction with Stainless Steel FastenersElectric Hydraulic Actuator Rated at 7853 lbs. of ThrustStandard B.I.A. (Bolt Hole Pattern)Convenient Adapter Kit Available for Clamp-on MotorsFour Stainless Steel Motor Mounting Bolts Included
Control Adapter Mercury - 301074 - 1-301074F1
For 3300/33C style cables
Control Adaptor - Omc - 304939 - 1-304939F1
For 3300/33C style cables
Cylinder W/Offset Arm Silversteer Uflex Uc128 - Uc128Ts-Svs 2 - 216-Uc128Tssvs2F1
Cylinder W/Straight Arm Silversteer Uflex Uc128 - Uc128Ts-Svs 1 - 216-Uc128Tssvs1F1
Cylinder-Pwr Str Ss<8M0063382 - 8M0208402 - 710-8M0208402F1
Dash Tilt Module Kit - Sht91190 - 1-Sht91190F1
Includes helm and tilt mechanism.
Dash Tilt Module Kit - Sht91523 - 1-Sht91523F1
Includes helm and tilt mechanism.
Dash Tilt Module Kit - Sht91526 - 1-Sht91526F1
Includes helm and tilt mechanism.
Dash Tilt Module Kit - Sht91610 - 1-Sht91610F1
Includes helm and tilt mechanism.
Dash Tilt Module Kit - Sht91630 - 1-Sht91630F1
Includes helm and tilt mechanism.
Dc Control - 301916 - 1-301916F1
For throttle, choke, fuel shutdown. Uses 33C or 43C supreme cables.
Deluxe Coastal Helm Chair W/Flip-Up Bolster - Hb10-20Owh-0000-0-0 - 236-Hb10200Whf1
Includes fixed armrests and adjustable bolsterPremium quality marine-grade vinyl fabrics treated with anti-microbial and UV stabilizersPlush foam padding provides durable support Flexible, ergonomic designMeets ABYC H-31 impact testStainless Steel Type 316 armrest bracketsStainless Steel Type 316 roll-back seat hinge with protective shield Roll-back seat bolster allows quick repositioning
Dexter 10" & 12" Brake, Drum Wheel Cylinder Kit - Includes 2 Master Cylinders And Mounting Screws - 80994 - 641-80994 Superseded By: 641-K71G0255F1
10" & 12" Brake, drum wheel cylinder kit includes 11345 LH & 11346 RH cylinders 11241 Bleeder and 11240 Adapter for Bleeder
Dexter® 10" Hydraulic Drum Brake Assembly - Sold In Pairs (Left & Right) - 81097 - 641-81097 Superseded By: 641-K2381097F1
Dexter® free backing drum brakes are designed to withstand a marine environment.The Galv-X system is composed of inorganic polymers which bond metallic zinc flakes to the metal surface.Kit includes aluminum wheel cylinder, stainless steel spring, brake pads that are bonded and riveted with bronze rivets to backing plate and backing. These are enough parts to do one axle.Drum replacement parts kit includes: springs, adjuster tool, brass hardware, and hardware for the backing plate.
Dexter® 12" Hydraulic Drum Brake Assembly - Sold In Pairs (Left & Right) - 81098 - 641-81098 Superseded By: 641-K71G0102F1
Dexter® free backing drum brakes are designed to withstand a marine environment.The Galv-X system is composed of inorganic polymers which bond metallic zinc flakes to the metal surface.Kit includes aluminum wheel cylinder, stainless steel spring, brake pads that are bonded and riveted with bronze rivets to backing plate and backing. These are enough parts to do one axle.Drum replacement parts kit includes: springs, adjuster tool, brass hardware, and hardware for the backing plate.
Dexter® 12" Hydraulic Drum Brake Assembly - Sold In Pairs (Left & Right) - 82096 - 641-82096 Superseded By: 641-K71G0107F1
Dexter® free backing drum brakes are designed to withstand a marine environment.The E-Coat drums are painted.Kit includes aluminum wheel cylinder, stainless steel spring, brake pads that are bonded and riveted with bronze rivets to backing plate and backing. These are enough parts to do one axle.Drum replacement parts kit includes: springs, adjuster tool, brass hardware, and hardware for the backing plate.
Dometic 3/8" X 100' Nylon Tubing - Use For Dometic 1 Sterndrive, Seadrive And Inboard Systems Only - Ht5100 - 1-Ht5100F1
3/8" nylon tubing. Recommended for Dometic I sterndrive, seadrive and inboard systems only. Do not use on outboard systems. Not recommended for use with any 2.0 or 2.4 helm pumps.
Dometic 3/8" X 25' Nylon Tubing - Use For Dometic 1 Sterndrive, Seadrive And Inboard Systems Only - Ht5092 - 1-Ht5092F1
3/8" nylon tubing. Recommended for Dometic I sterndrive, seadrive and inboard systems only. Do not use on outboard systems. Not recommended for use with any 2.0 or 2.4 helm pumps.
Dometic 3/8" X 50' Nylon Tubing - Use For Dometic 1 Sterndrive, Seadrive And Inboard Systems Only - Ht5095 - 1-Ht5095F1
3/8" nylon tubing. Recommended for Dometic I sterndrive, seadrive and inboard systems only. Do not use on outboard systems. Not recommended for use with any 2.0 or 2.4 helm pumps.
Dometic 3/8" X 75' Nylon Tubing - Use For Dometic 1 Sterndrive, Seadrive And Inboard Systems Only - Ht5097 - 1-Ht5097F1
3/8" nylon tubing. Recommended for Dometic I sterndrive, seadrive and inboard systems only. Do not use on outboard systems. Not recommended for use with any 2.0 or 2.4 helm pumps.
Dometic Bulkhead Hose Kit For Hydraulic Steering Installation - 2 Pieces Per Kit - Ho8104 - 1-Ho8104F1
Dometic Bulkhead Hose Kits assure a neat hydraulic steering installation. Each hose has an integral bulkhead fitting for tidy routing of hoses through a splashwell bulkhead, helping to eliminate excess loose hose, kinking or chafing. Includes two hoses - can be used with all Dometic systems, except BayStar, Capilano and 3-line inboard.
Dometic Bulkhead Hose Kit For Hydraulic Steering Installation - 2 Pieces Per Kit - Ho8106 - 1-Ho8106F1
Dometic Bulkhead Hose Kits assure a neat hydraulic steering installation. Each hose has an integral bulkhead fitting for tidy routing of hoses through a splashwell bulkhead, helping to eliminate excess loose hose, kinking or chafing. Includes two hoses - can be used with all Dometic systems, except BayStar, Capilano and 3-line inboard.
Dometic Bulkhead Hose Kit For Hydraulic Steering Installation - 2 Pieces Per Kit - Ho8108 - 1-Ho8108F1
Dometic Bulkhead Hose Kits assure a neat hydraulic steering installation. Each hose has an integral bulkhead fitting for tidy routing of hoses through a splashwell bulkhead, helping to eliminate excess loose hose, kinking or chafing. Includes two hoses - can be used with all Dometic systems, except BayStar, Capilano and 3-line inboard.
Dometic Bulkhead Hose Kit For Hydraulic Steering Installation - 2 Pieces Per Kit - Ho8110 - 1-Ho8110F1
Dometic Bulkhead Hose Kits assure a neat hydraulic steering installation. Each hose has an integral bulkhead fitting for tidy routing of hoses through a splashwell bulkhead, helping to eliminate excess loose hose, kinking or chafing. Includes two hoses - can be used with all Dometic systems, except BayStar, Capilano and 3-line inboard.
Dometic Bulkhead Hose Kit For Hydraulic Steering Installation - 2 Pieces Per Kit - Ho8116 - 1-Ho8116F1
Dometic Bulkhead Hose Kits assure a neat hydraulic steering installation. Each hose has an integral bulkhead fitting for tidy routing of hoses through a splashwell bulkhead, helping to eliminate excess loose hose, kinking or chafing. Includes two hoses - can be used with all Dometic systems, except BayStar, Capilano and 3-line inboard.
Dometic Bulkhead Hose Kit For Hydraulic Steering Installation - 2 Pieces Per Kit - Ho8118 - 1-Ho8118F1
Dometic Bulkhead Hose Kits assure a neat hydraulic steering installation. Each hose has an integral bulkhead fitting for tidy routing of hoses through a splashwell bulkhead, helping to eliminate excess loose hose, kinking or chafing. Includes two hoses - can be used with all Dometic systems, except BayStar, Capilano and 3-line inboard.
Dometic Bulkhead Hose Kit For Hydraulic Steering Installation - 2 Pieces Per Kit - Ho8120 - 1-Ho8120F1
Dometic Bulkhead Hose Kits assure a neat hydraulic steering installation. Each hose has an integral bulkhead fitting for tidy routing of hoses through a splashwell bulkhead, helping to eliminate excess loose hose, kinking or chafing. Includes two hoses - can be used with all Dometic systems, except BayStar, Capilano and 3-line inboard.
Dometic Bulkhead Hose Kit For Hydraulic Steering Installation - 2 Pieces Per Kit - Ho8122 - 1-Ho8122F1
Dometic Bulkhead Hose Kits assure a neat hydraulic steering installation. Each hose has an integral bulkhead fitting for tidy routing of hoses through a splashwell bulkhead, helping to eliminate excess loose hose, kinking or chafing. Includes two hoses - can be used with all Dometic systems, except BayStar, Capilano and 3-line inboard.
Dometic Bulkhead Hose Kit For Hydraulic Steering Installation - 2 Pieces Per Kit - Ho8124 - 1-Ho8124F1
Dometic Bulkhead Hose Kits assure a neat hydraulic steering installation. Each hose has an integral bulkhead fitting for tidy routing of hoses through a splashwell bulkhead, helping to eliminate excess loose hose, kinking or chafing. Includes two hoses - can be used with all Dometic systems, except BayStar, Capilano and 3-line inboard.
Dometic Bulkhead Hose Kit For Hydraulic Steering Installation - 2 Pieces Per Kit - Ho8126 - 1-Ho8126F1
Dometic Bulkhead Hose Kits assure a neat hydraulic steering installation. Each hose has an integral bulkhead fitting for tidy routing of hoses through a splashwell bulkhead, helping to eliminate excess loose hose, kinking or chafing. Includes two hoses - can be used with all Dometic systems, except BayStar, Capilano and 3-line inboard.
Dometic Bulkhead Hose Kit For Hydraulic Steering Installation - 2 Pieces Per Kit - Ho8130 - 1-Ho8130F1
Dometic Bulkhead Hose Kits assure a neat hydraulic steering installation. Each hose has an integral bulkhead fitting for tidy routing of hoses through a splashwell bulkhead, helping to eliminate excess loose hose, kinking or chafing. Includes two hoses - can be used with all Dometic systems, except BayStar, Capilano and 3-line inboard.
Dometic Ha5418 Backplate Kit For Standard Helms - Ha5418 - 1-Ha5418F1
Square backplate kit for the 5271 and 5272 Dometic helms. Used to retrofit new Dometic standard helm into hole cutouts
Dometic Ha5419 20 Degree Wedge For Standard Helms - Ha5419 - 1-Ha5419F1
For standard helms. Allows a Dometic helm to be mounted 20° from perpendicular (not for BayStar).
Dometic Ha5432 Non Vented Fill Plug - Use For -3 Model Helms Only - Ha5432 - 1-Ha5432F1
Dometic HA5432 Non Vented Fill Plug - Use for -3 Model Helms Only.
Dometic Ha5471-2 Liquid Tie Bar Alignment Valve - Assists W/ Air Removal & Re-Alignment Of Engine - Ha5471-2 - 1-Ha54712F1
The cylinder allows for the periodic required realignment of two outboard motors or rudders that are linked together with a hydraulic tie bar as opposed to a solid link or a mechanical tie bar. Hydraulic tie bar alignment valve may be used in conjunction with a cylinder mounted to each engine.
Dometic Ha5482 Electronic Power Steering Fluid, Qt. - Ha5482 - 1-Ha5482F1
Specially formulated for Marine Applications For use in the Optimus Steering System
Dometic Ha5486 Purge Hose Kit, 15' - Ha5486 - 1-Ha5486F1
Hose and valve assembly for system bleed and flush Connects between Optimus Series Steering Pumps and SeaStar Hydraulic Steering CylindersQuick connect fittings connect to male quick connects on Optimus Pumps and SeaStar CylindersIncludes Return Hose Disconnect, for contaminated fluid disposal during system flush
Dometic Ha5487 Purge Hose Kit, 30' - Ha5487 - 1-Ha5487F1
Hose and valve assembly for system bleed and flushConnects between Optimus Series Steering Pumps and SeaStar Hydraulic Steering CylindersQuick connect fittings connect to male quick connects on Optimus Pumps and SeaStar CylindersIncludes Return Hose Disconnect, for contaminated fluid disposal during system flush
Dometic Ha5820 Tiller Bushing Kit - Ha5820 - 1-Ha5820F1
Dometic Ha5829 Seastar Hydraulic Hardware Kit, Tiller Bushing/Bolt Kit - Ha5829 - 1-Ha5829F1
Dometic Ha6523 Classic Tilt Replacement Kit - Ha6523 - 1-Ha6523F1
Kit is designed to replace the tilting mechanism of a Dometic Traditional and Classic Tilt helms.
Dometic Hc5345-3 Front Mount Outboard Cylinder - Hc5345-3 - 1-Hc53453F1
Updated cylinders fit the same applications as the prior models. Improvements over previous models include: Updated styling, a more robust barrel, new sealing systems and materials with excellent resistance to compression set, and new adjustable stainless steel O-ring fittings (ORB). Front Mount cylinders are balanced and the most commonly used. Recommendations: Single Engines:Single Cylinder: 350 HP-Max, 65 MPH-Max HC53xx Cylinder (See note 1)Single Cylinder: 350 HP-Max, HC63xx Pro or HC6845S (See note 2) Dual Engine Non-Counter Rotating:Single cyl: 450 hp max, 55 MPH max. HC53xx Cylinder, HO60xx TiebarDual cyl: 600 hp max, 55 MPH max. HC53xx Cylinders, HO60xx Tiebar Dual Engine Counter Rotating:Single cyl: 600hp max, 55 MPH max. HC53xx Cylinder, HO60xx TiebarDual cyl: 600 hp max, 55 MPH max. HC53xx Cylinders, HO60xx Tiebar Triple Engine One with Counter Rotating:Dual cyl: 900 hp max, 55 MPH max. HC53xx Cylinder, HO60xx TiebarsTriple cyl: 900 hp max, 55 MPH max. HC53xx Cylinders, HO60xx Tiebars Note 1. Dometic has specific steering equipment for boats that are driven aggressively, used in severe conditions or with more than 300 HP per engine.
Dometic Hc5345-3 Honda Front Mount Outboard Cylinder - Hc5347-3 - 1-Hc53473F1
Updated cylinders fit the same applications as the prior models. Improvements over previous models include: Updated styling, a more robust barrel, new sealing systems and materials with excellent resistance to compression set, and new adjustable stainless steel O-ring fittings (ORB). Front Mount cylinders are balanced and the most commonly used. Recommendations: Single Engines:Single Cylinder: 350 HP-Max, 65 MPH-Max HC53xx Cylinder (See note 1)Single Cylinder: 350 HP-Max, HC63xx Pro or HC6845S (See note 2)Dual Engine Non-Counter Rotating:Single cyl: 450 hp max, 55 MPH max. HC53xx Cylinder, HO60xx TiebarDual cyl: 600 hp max, 55 MPH max. HC53xx Cylinders, HO60xx TiebarDual Engine Counter Rotating:Single cyl: 600hp max, 55 MPH max. HC53xx Cylinder, HO60xx TiebarDual cyl: 600 hp max, 55 MPH max. HC53xx Cylinders, HO60xx TiebarTriple Engine One with Counter Rotating:Dual cyl: 900 hp max, 55 MPH max. HC53xx Cylinder, HO60xx TiebarsTriple cyl: 900 hp max, 55 MPH max. HC53xx Cylinders, HO60xx TiebarsNote 1. Dometic has specific steering equipment for boats that are driven aggressively, used in severe conditions or with more than 300 HP per engine.
Dometic Hc5345-3 Honda Front Mount Outboard Cylinder - Hc5445-3 - 1-Hc54453F1
Updated cylinders fit the same applications as the prior models. Improvements over previous models include: Updated styling, a more robust barrel, new sealing systems and materials with excellent resistance to compression set, and new adjustable stainless steel O-ring fittings (ORB). Front Mount cylinders are balanced and the most commonly used. Recommendations: Single Engines:Single Cylinder: 350 HP-Max, 65 MPH-Max HC53xx Cylinder (See note 1)Single Cylinder: 350 HP-Max, HC63xx Pro or HC6845S (See note 2)Dual Engine Non-Counter Rotating:Single cyl: 450 hp max, 55 MPH max. HC53xx Cylinder, HO60xx TiebarDual cyl: 600 hp max, 55 MPH max. HC53xx Cylinders, HO60xx TiebarDual Engine Counter Rotating:Single cyl: 600hp max, 55 MPH max. HC53xx Cylinder, HO60xx TiebarDual cyl: 600 hp max, 55 MPH max. HC53xx Cylinders, HO60xx TiebarTriple Engine One with Counter Rotating:Dual cyl: 900 hp max, 55 MPH max. HC53xx Cylinder, HO60xx TiebarsTriple cyl: 900 hp max, 55 MPH max. HC53xx Cylinders, HO60xx TiebarsNote 1. Dometic has specific steering equipment for boats that are driven aggressively, used in severe conditions or with more than 300 HP per engine.
Dometic Hc5380-3 Splashwell Mount Outboard 9" Stroke 9.3 Cubic Inch Cylinder - Replaces Hc5380 - Hc5380-3 - 1-Hc53803F1
Outboard steering offers three models of steering cylinders to suit most applications: Front Mount, Side Mount, and Splashwell Mount.Front Mount cylinders are balanced and the most commonly used. They are designed for single engines to 350 hp and multiple outboard engine installations with total power to 700 hp in counter rotating applications. Before ordering, determine the best application for the boat based on hull design, speed, and usage.Side mount cylinders are unbalanced and offer 4.8 or 5.7 turns lock-to-lock. It is suitable for shallow splashwells and use on engines fitted with power steering. For single engines to 300 hp and multiple outboard engine installations with total power to 600 hp in counter rotating applications.Splashwell Mount cylinders are an unbalanced, light duty alternative to front & side mount with 5.5 or 6.5 turns lock-to-lock for engines with or without support tubes. For single engines to 300 hp and multiple outboard engine installations with total power to 600 hp in counter rotating applications. It can be transom or hull mounted.
Dometic Hf5501 Outboard Fitting Kit, Use For Npt National Pipe Thread Helm Pumps - Hf5501 - 1-Hf5501F1
These fitting kits enable installation of a 2nd station helm or an autopilot pump into an existing Dometic outboard steering system. Some additional parts which are supplied with the helm pump will be re-used.HF5501 Includes:2ea HF5531 Tee -3/8"Tube(M), 1/4" NPT(M), 3/8"Tube Ctr(M)4ea HF5528 Helm Fitting - 1/4" NPT(M), 3/8" Tube(M)1ea HA5432 No-Vent Fill Plug25' HT5092 3/8" Nylon Tube
Dometic Hf5502 Inboard / Sterndrive Fitting Kit, Use For Npt National Pipe Thread Helm Pumps - Hf5502 - 1-Hf5502F1
These fitting kits enable installation of a 2nd station helm or an autopilot pump into an existing Dometic inboard or sterndrive steering system. Some additional parts which are supplied with the helm pump will be re-used.HF5502 Includes:2ea HF5530 Tee -3/8"Tube(M))2ea HF5528 Helm Fitting - 1/4" NPT(M), 3/8" Tube(M)1ea HA5432 No-Vent Fill Plug
Dometic Hf5513 3 Bulkhead Fitting Kit Single Cylinder Installations 2 Assemblies Per Kit - Hf5513 - 1-Hf5513F1
Dometic HF5513 3 Bulkhead Fitting Kit Single Cylinder Installations 2 Assemblies per Kit.
Dometic Hf5515 3" Bulkhead Fitting Kit - Dual Cylinder Installations - Hf5515 - 1-Hf5515F1
Dometic HF5515 3" Bulkhead Fitting Kit - Dual Cylinder Installations.
Dometic Hf5519 Hydraulic Fitting Bleed Tees Tm Cylinders - Brass - 2/Kit - Hf5519 - 1-Hf5519F1
All Dometic manual hydraulic steering systems utilize the same style of fittings for all applications. These are 3/8" compression fittings which utilize a 9/16"-24 extra fine thread.
Dometic Hf5520 Hydraulic Fitting Horizontal Bleeder Tees - Aluminum / Brass - 3/8" Tube - 2/Kit - Hf5520 - 1-Hf5520F1
All Dometic manual hydraulic steering systems utilize the same style of fittings for all applications. These are 3/8" compression fittings which utilize a 9/16"-24 extra fine thread.
Dometic Hf5524 Cap Plug Nut 3/8" Tube, 3/Kit - Hf5524 - 1-Hf5524F1
All Dometic manual hydraulic steering systems utilize the same style of fittings for all applications. These are 3/8" compression fittings which utilize a 9/16"-24 extra fine thread.
Dometic Hf5526 Hydraulic Fitting Tube Nuts 3/8" - Brass - 3/8" Tube - 6/Kit - Hf5526 - 1-Hf5526F1
All Dometic manual hydraulic steering systems utilize the same style of fittings for all applications. These are 3/8" compression fittings which utilize a 9/16"-24 extra fine thread.
Dometic Hf5527 Hydraulic Union Coupling Fitting - Brass - 3/8" Tube - 3/Kit - Hf5527 - 1-Hf5527F1
All Dometic manual hydraulic steering systems utilize the same style of fittings for all applications. These are 3/8" compression fittings which utilize a 9/16"-24 extra fine thread.
Dometic Hf5528 Hydraulic Straight Fittings - Aluminum - 3/8" Tube - 3/Kit - Hf5528 - 1-Hf5528F1
All Dometic manual hydraulic steering systems utilize the same style of fittings for all applications. These are 3/8" compression fittings which utilize a 9/16"-24 extra fine thread.
Dometic Hf5529 Hydraulic 90 Degree Elbow Fittings - Aluminum - 3/8" Tube - 3Kit - Hf5529 - 1-Hf5529F1
All Dometic manual hydraulic steering systems utilize the same style of fittings for all applications. These are 3/8" compression fittings which utilize a 9/16"-24 extra fine thread.
Dometic Hf5530 Hydraulic Tee Fitting 3/8" Tube - Brass - 3/Kit - Hf5530 - 1-Hf5530F1
All Dometic manual hydraulic steering systems utilize the same style of fittings for all applications. These are 3/8" compression fittings which utilize a 9/16"-24 extra fine thread.
Dometic Hf5531 Hydraulic Tee Fitting 3/8" Tube - Aluminum - 3/Kit - Hf5531 - 1-Hf5531F1
All Dometic manual hydraulic steering systems utilize the same style of fittings for all applications. These are 3/8" compression fittings which utilize a 9/16"-24 extra fine thread.
Dometic Hf5533 Hydraulic Tee Fitting 3/8" Tube - Brass - 3/Kit - Hf5533 - 1-Hf5533F1
All Dometic manual hydraulic steering systems utilize the same style of fittings for all applications. These are 3/8" compression fittings which utilize a 9/16"-24 extra fine thread.
Dometic Hf5534 Hydraulic Elbow Fitting 3/8" Tube - Brass - 3/Kit - Hf5534 - 1-Hf5534F1
All Dometic manual hydraulic steering systems utilize the same style of fittings for all applications. These are 3/8" compression fittings which utilize a 9/16"-24 extra fine thread.
Dometic Hf5536 Hydraulic Tee Fitting 3/8" Tube - Aluminum - 3/Kit - Hf5536 - 1-Hf5536F1
All Dometic manual hydraulic steering systems utilize the same style of fittings for all applications. These are 3/8" compression fittings which utilize a 9/16"-24 extra fine thread.
Dometic Hf5538 Hydraulic Street Elbow Fitting - Brass - 3/Kit - Hf5538 - 1-Hf5538F1
All Dometic manual hydraulic steering systems utilize the same style of fittings for all applications. These are 3/8" compression fittings which utilize a 9/16"-24 extra fine thread.
Dometic Hf5540 45° Elbow Fitting, 2/Kit - Hf5540 - 1-Hf5540F1
All Dometic manual hydraulic steering systems utilize the same style of fittings for all applications. These are 3/8" compression fittings which utilize a 9/16"-24 extra fine thread.
Dometic Hf5548 Bleed Nipple, 2/Kit - Hf5548 - 1-Hf5548F1
All Dometic manual hydraulic steering systems utilize the same style of fittings for all applications. These are 3/8" compression fittings which utilize a 9/16"-24 extra fine thread.
Dometic Hf6002 Bleeder/Tee, Vertical, 2/Kit - Hf6002 - 1-Hf6002F1
All Dometic manual hydraulic steering systems utilize the same style of fittings for all applications. These are 3/8" compression fittings which utilize a 9/16"-24 extra fine thread.
Dometic Hf6003 Bleeder/Tee, Hynautic, 2/Kit - Hf6003 - 1-Hf6003F1
All Dometic manual hydraulic steering systems utilize the same style of fittings for all applications. These are 3/8" compression fittings which utilize a 9/16"-24 extra fine thread.
Dometic Hf6004 Hydraulic 90 Degree Elbow Fittings | Aluminum | 3/8" Tube | 2/Kit - Hf6004 - 1-Hf6004F1
All Older Style Dometic manual hydraulic steering systems. These are 3/8" compression fittings which utilize a 9/16"-24 extra fine thread. (New Updated cylinders with part numbers ending in "-3" Use only ORB fittings listed separately. )
Dometic Hh5271-4 Seastar Helm 1.7 Front Mount (Gen 4) - Hh5271-4 - 1-Hh52714F1
Features helm rotor supported by 3 roller bearings, ball bearing piston race, simplified integrated metal construction, field replaceable shaft seal, -5 ORB port threads, internal pressure relief valve, front of dash fill, lock valve for positive rudder lock, patented bleed tubes and internal air pocket to eliminate oil expansion overflow. Compact and stylish. Fits 3'' dash hole for round look with retro fit of 4-1/2'' dash hole for standard square look. Equipped with adjustable O-ring fittings to simplify the installation process and allow for simple reorientation of the fittings after installation.
Dometic Hk43004 Baystar Compact Hydraulic Steering System (No Hose) - Hk4300-4 - 1-Hk43004F1
Application: BayStar is for single-outboard powered boats rated up to 150 HP, including runabouts and inflatables and outboard engines with ABYC standard engine tilt tubes up to 150 HP (total). For single station, single engine use only. BayStar is not intended for high speed, high performance type boats.Helm and cylinder equipped with adjustable O-ring fittings to simplify the installation process and allow for simple reorientation of the fittings after installation. Two year warranty. Requires 5" H x 6" D x 21" W minimum splashwell5 Turns lock-to-lockBalanced cylinder fits most splashwells5" footprint; needs only 3" hole (Standard or Tilt)Complete with helm, cylinder, fittings, tubing, oil, fill kit & instructionsStandard 3/4" tapered shaftMeets A.B.Y.C. standards and meets NMMA certification requirements^Kits Includes:BayStar Helm 1.4 cu with adjustable O-ring fittingsHC4645H3 - BayStar Compact CylinderHA5430 (2) - Hydraulic Oil (1 liter)
Dometic Hk64004 Seastar Steering Kit - Hk6400-4 - 1-Hk64004F1
The world's most popular outboard hydraulic system offers smooth, super-efficient steering for today's high performance hulls. It's the OEM choice for center consoles, cruisers and more.Applications: Single and dual non-power-assisted outboard engines up to 350 HP (700 combined HP for counter-rotating duals) that have ABYC standard engine tilt tube. Ideal for cruisers, runabouts, center console boats, offshore fishing boats and many more. Suitable for speeds up to 60 MPH and dual station use (with purchase of extra helm, hose & fittings). Allows independent engine tilt in dual engine installations. Dual engines require purchase of a tie bar kit and extra hardware.Helm and cylinder equipped with adjustable O-ring fittings to simplify the installation process and allow for simple reorientation of the fittings after installation. ^Features: 5 turns lock-to-lock4-7/16" footprint; needs 3" dash holeStandard 3/4" tapered shaftHO51xx hoses sold separately^Kit Includes:HH52714 - Dometic Helm 1.7 cu. in.HC53453 - Dometic Pivot CylinderHA5430 (2) - Hydraulic Oil (1 Liter)
Dometic Ho7100 Field Install Bulkhead Fitting Kit, Single Hose, Stainless, 1 Pr. - Ho7100 - 1-Ho7100F1
Field Installed Bulkhead Kit Split grommet design allows for easy installation onto a hose assemblySplit pigtail with snap fit tabs provides positive feel when product is installed properlySimple solution to cleanly route hoses through the hull while maintaining safety and aesthetics
Dometic Ho7105 Field Install Bulkhead Fitting Kit, Single Hose, Black Plastic, 1 Pr. - Ho7105 - 1-Ho7105F1
Field Installed Bulkhead Kit Split grommet design allows for easy installation onto a hose assemblySplit pigtail with snap fit tabs provides positive feel when product is installed properlySimple solution to cleanly route hoses through the hull while maintaining safety and aesthetics
Dometic Ho7200 Field Install Bulkhead Fitting Kit, Dual Hose, Stainless - Ho7200 - 1-Ho7200F1
Field Installed Bulkhead Kit Split grommet design allows for easy installation onto a hose assemblySplit pigtail with snap fit tabs provides positive feel when product is installed properlySimple solution to cleanly route hoses through the hull while maintaining safety and aesthetics
Dometic Ho7205 Field Install Bulkhead Fitting Kit, Dual Hose, Black Plastic - Ho7205 - 1-Ho7205F1
Field Installed Bulkhead Kit Split grommet design allows for easy installation onto a hose assemblySplit pigtail with snap fit tabs provides positive feel when product is installed properlySimple solution to cleanly route hoses through the hull while maintaining safety and aesthetics
Dometic Hose Kit Id 5/16" - Includes 2 Pieces Per Kit - Ho5102 - 1-Ho5102F1
Includes two hoses - can be used with all Dometic systems, except SeaStar PRO, BayStar, Capilano and 3-line inboard systems. ID of 5/16".
Dometic Hose Kit Id 5/16" - Includes 2 Pieces Per Kit - Ho5103 - 1-Ho5103F1
Includes two hoses - can be used with all Dometic systems, except SeaStar PRO, BayStar, Capilano and 3-line inboard systems. ID of 5/16".
Dometic Hose Kit Id 5/16" - Includes 2 Pieces Per Kit - Ho5104 - 1-Ho5104F1
Includes two hoses - can be used with all Dometic systems, except SeaStar PRO, BayStar, Capilano and 3-line inboard systems. ID of 5/16".
Dometic Hose Kit Id 5/16" - Includes 2 Pieces Per Kit - Ho5106 - 1-Ho5106F1
Includes two hoses - can be used with all Dometic systems, except SeaStar PRO, BayStar, Capilano and 3-line inboard systems. ID of 5/16".
Dometic Hose Kit Id 5/16" - Includes 2 Pieces Per Kit - Ho5126 - 1-Ho5126F1
Includes two hoses - can be used with all Dometic systems, except SeaStar PRO, BayStar, Capilano and 3-line inboard systems. ID of 5/16".
Dometic Hose Kit Id 5/16" - Includes 2 Pieces Per Kit - Ho5128 - 1-Ho5128F1
Includes two hoses - can be used with all Dometic systems, except SeaStar PRO, BayStar, Capilano and 3-line inboard systems. ID of 5/16".
Dometic Hose Kit Id 5/16" - Includes 2 Pieces Per Kit - Ho5130 - 1-Ho5130F1
Includes two hoses - can be used with all Dometic systems, except SeaStar PRO, BayStar, Capilano and 3-line inboard systems. ID of 5/16".
Dometic Hp6126 Helm Vented Fill Plug | 5 Per Kit - Hp6126 - 1-Hp6126F1
Five pack of SeaStar helm vented fill plugs.
Dometic Hp6156 Mounting Hardware For Marine Kicker Cable - Hp6156 - 1-Hp6156F1
Drive Mount Plate kit (port/starboard) for SeaStar Kicker Cable Tie Bar.
Dometic No Feedback 4.2 Rotary Steering Kit - Ss14710 - 1-Ss14710F1
With the advantage of 4.2 turns lock-to-lock and our patented No FeedBack steering to lock out steering loads, Teleflex's 4.2 Rotary NFB Steering is the ideal single-cable system for most non-power-steered boats. The helm is a drop-in replacement for current generation Safe-T with no dash modifications required. Applications: Suitable for most single-station boats with a single non-power-assisted outboard engine up to V-6 and minimal engine flutter or steering instability. 4.2 accepts wheels up to 16" diameter. Replaces nearly all Teleflex Safe-T® steering systems without dash modification.Features:Patented No FeedBack™ Steering mechanismComfortable 4.2 turns from lock-to-lockMinimal clutch free playStandard 3/4" round tapered steering shaftStainless steel cable output endMeets A.B.Y.C. standards and N.M.M.A. certification requirementsIncludes:SH4910P - No FeedBack HelmSB27150P 90° - Bezel KitSSC62XX - Steering Cable
Dometic No Feedback 4.2 Rotary Steering Kit - Ss14711 - 1-Ss14711F1
With the advantage of 4.2 turns lock-to-lock and our patented No FeedBack steering to lock out steering loads, Teleflex's 4.2 Rotary NFB Steering is the ideal single-cable system for most non-power-steered boats. The helm is a drop-in replacement for current generation Safe-T with no dash modifications required. Applications: Suitable for most single-station boats with a single non-power-assisted outboard engine up to V-6 and minimal engine flutter or steering instability. 4.2 accepts wheels up to 16" diameter. Replaces nearly all Teleflex Safe-T® steering systems without dash modification.Features:Patented No FeedBack™ Steering mechanismComfortable 4.2 turns from lock-to-lockMinimal clutch free playStandard 3/4" round tapered steering shaftStainless steel cable output endMeets A.B.Y.C. standards and N.M.M.A. certification requirementsIncludes:SH4910P - No FeedBack HelmSB27150P 90° - Bezel KitSSC62XX - Steering Cable
Dometic No Feedback 4.2 Rotary Steering Kit - Ss14712 - 1-Ss14712F1
With the advantage of 4.2 turns lock-to-lock and our patented No FeedBack steering to lock out steering loads, Teleflex's 4.2 Rotary NFB Steering is the ideal single-cable system for most non-power-steered boats. The helm is a drop-in replacement for current generation Safe-T with no dash modifications required. Applications: Suitable for most single-station boats with a single non-power-assisted outboard engine up to V-6 and minimal engine flutter or steering instability. 4.2 accepts wheels up to 16" diameter. Replaces nearly all Teleflex Safe-T® steering systems without dash modification.Features:Patented No FeedBack™ Steering mechanismComfortable 4.2 turns from lock-to-lockMinimal clutch free playStandard 3/4" round tapered steering shaftStainless steel cable output endMeets A.B.Y.C. standards and N.M.M.A. certification requirementsIncludes:SH4910P - No FeedBack HelmSB27150P 90° - Bezel KitSSC62XX - Steering Cable
Dometic No Feedback 4.2 Rotary Steering Kit - Ss14713 - 1-Ss14713F1
With the advantage of 4.2 turns lock-to-lock and our patented No FeedBack steering to lock out steering loads, Teleflex's 4.2 Rotary NFB Steering is the ideal single-cable system for most non-power-steered boats. The helm is a drop-in replacement for current generation Safe-T with no dash modifications required. Applications: Suitable for most single-station boats with a single non-power-assisted outboard engine up to V-6 and minimal engine flutter or steering instability. 4.2 accepts wheels up to 16" diameter. Replaces nearly all Teleflex Safe-T® steering systems without dash modification.Features:Patented No FeedBack™ Steering mechanismComfortable 4.2 turns from lock-to-lockMinimal clutch free playStandard 3/4" round tapered steering shaftStainless steel cable output endMeets A.B.Y.C. standards and N.M.M.A. certification requirementsIncludes:SH4910P - No FeedBack HelmSB27150P 90° - Bezel KitSSC62XX - Steering Cable
