Hydraulic Steering

Seachoice 95101 Aluminum Anode Kit For 4 Cylinder Mercury Verado - 50-95101 - 50-95101F1

Includes: Block anode for gimbal housing (1)Plates for side of lower unit (2)Skeg for ventilation plate (1)316 Stainless steel screws18-8 / 304 Stainless steel screws

Seachoice 95111 Magnesium Anode Kit For 4 Cylinder Mercury Verado - 50-95111 - 50-95111F1

Includes: Block anode for gimbal housing (1)Plates for side of lower unit (2)Skeg for ventilation plate (1)316 Stainless steel screws18-8 / 304 Stainless steel screws

Seachoice 95121 Aluminum Anode Kit For 6 Cylinder Mercury Verado - 50-95121 - 50-95121F1

Includes: Block anode for gimbal housing (7, various)Skeg for ventilation plate (1)316 Stainless steel screwsPlates for side of lower unit (2)18-8/304 Stainless steel screws

Seachoice 95131 Magnesium Anode Kit For 6 Cylinder Mercury Verado - 50-95131 - 50-95131F1

Includes: Block anode for gimbal housing (7, various)Skeg for ventilation plate (1)316 Stainless steel screwsPlates for side of lower unit (2)18-8/304 Stainless steel screws

Seastar 212151003 Sl-3 Cable Adapter Kit - 212151-003 - 1-212151003F1

For use with 3300 and 3300HP cable. Quick installation and maximum adjustment at engine. Includes throttle and shift adapters.

Seastar Ap1233 12V Type 2 100 Cubic Inch Autopilot Pump - Compatible W/ Standard Seastar Hoses - Ap1233 - 1-Ap1233F1

Fixed flow, reversible pump set that uses an internal hydraulic gear pump, producing very little vibration or noise. Long life 12 VDC motor (i.e. long life brushes)Compact designSimplified installationLow power consumptionABYC, CE and J1171 compliantSuperior corrosion resistanceQuiet operationMounting bracket includedStand alone or mounts to SeaStar Power Assist unit

Seastar Capilano Helm W/ 3/4" Taper Shaft - Hh5250 - 1-Hh5250F1

For extra heavy duty/commercial vessels, the Capilano steering system offers extremely rugged and reliable 'variable flow'. Rear-mount helms and heavy duty brass cylinders with stainless steel and bronze mounting hardware.

Seastar Capilano Helm W/ 3/4" Taper Shaft - Hh5275 - 1-Hh5275F1

For extra heavy duty/commercial vessels, the Capilano steering system offers extremely rugged and reliable 'variable flow'. Rear-mount helms and heavy duty brass cylinders with stainless steel and bronze mounting hardware.

Seastar Ch2200 Dual Function Ski Boat Control - Ch2200P - 1-Ch2200Pf1

Single lever, dual action for throttle & shift Superior neutral engine warm-up control (ski version)Flush mount design for quick, tidy installationIncludes hardware for two 33 type cablesCrisp shifting ball grip for a solid, sure feel Ski version: All inboard ski boats and other single station craft requiring super-smooth, precise throttle control.

Seastar Dk4600 Adapter Kit For Anchor Systems - Dk4600 - 861-Dk4600F1

Required for installation of Power Pole® or Talon® on JP4060 and JP4060HD. This essential performance accessory allows for higher speed, gains in fuel economy and the ability to run in shallow water. Port and Starboard.

Seastar Epsk1207 Est Display Set Up Tool - Epsk1207 - 1-Epsk1207F1

i6800 set up display tool.

Seastar Ha1205 Spa Retrofit Kit For Autopilot Pump - Required To Mount To Pa1200-2 Power Assist Pump - Ha1205 - 1-Ha1205F1

Seastar Ha4641 Baystar Adapter Plate - Converts Hc4645H To Hc4647H - Ha4641 - 1-Ha4641F1

Kit - Converts HC4645 To HC4647 for Honda '98 & later

Seastar Ha4642 Baystar Adapter Plate - Converts Hc4645H To Hc4648H - Ha4642 - 1-Ha4642F1

Kit - Changes HC4645 Into HC4648 for J/E '77-'89, 65-150 HP

Seastar Ha4643 Baystar Adapter Plate - Converts Hc4645H To Hc4658H - Ha4643 - 1-Ha4643F1

Kit - Changes HC4645 Into HC4658 for J/E 40-140 HP 4-Stroke

Seastar Ha5438 Bleed Hose - Use For Seastar Outboard Steering Kit - Ha5438 - 1-Ha5438F1

Use for all inboard/outboard, outboard, and inboard Seastar hydraulic helms. Kit includes: hose with screw cap which fits SeaStar or equivalent oil bottles and push pin for venting/resealing bottle. Allows for clean bleed when used properly.

Seastar Ha5450 Helm Remote Fill Kit For Capilano Systems - Ha5450 - 1-Ha5450F1

Will facilitate filling and purging of steering system at a more convenient and accessible area than at a helm pump. Contains thru-dash fitting, waterproof vent plug, elbow fittings and 18" of vinyl tube.

Seastar Ha5458H Hydraulic Fluid, 5-Gallon Pail - Ha5458H - 1-Ha5458Hf1

SeaStar Hydraulic Steering Fluid is engineered with a proprietary additive package which contains anti-foaming and anti-rusting agents, anti-oxidants, viscosity stabilizers, corrosion inhibitors, wear additives and a water emulsification additive SeaStar Hydraulic Steering Fluid is the ONLY steering fluid which is Validated and Performance Matched to ensure the optimum performance and safety of SeaStar Solutions Hydraulic Steering Systems

Seastar Ha5461 Dual Cylinder Adapter For Power Purge Jr. - Ha5461 - 1-Ha5461F1

The quickest way to bleed a SeaStar® or BayStar® system and assure a rock-solid steering feel every time! Power Purge systems reduce installation and warranty costs while enhancing the quality of the boat for the end user. A typical manual fill and purge takes the average, experienced installer about 30 minutes per boat - by using Power Purge this can be reduced to 10 minutes or less.Features:Speed, quality, and ease-of-operationExtended portablility for use in the field - weighs only 12 poundsConvenient electrical hook-up utilizing an avail able12-volt boat battery

Seastar Ha5477 Grounding Strap For O/B Cylinder - Ha5477 - 1-Ha5477F1

The grounding strap kit is designed to provide added protection against corrosion caused by stray current. This is designed for use on the SeaStar and BayStar front mount outboard cylinders. Included with all new SeaStar front mount cylinders.

Seastar Ha5731 Capilano 18" Hose Kit For Copper Tubing (2 Hoses) - Ha5731 - 1-Ha5731F1

Contains two hoses 18" long. For single cylinder applications. Supplied with 1/2" swivel flare nuts on each end. Required of steering systems installed with copper tubing to accommodate slight cylinder movement.

Seastar Ha5822 High Strength Tiller Bolt W/ Nylock Nut 3/8" - Ha5822 - 1-Ha5822F1

SeaStar outboard steering offers three models of steering cylinders to suit most applications: Front Mount, Side Mount, and Splashwell Mount.Front Mount cylinders are balanced and the most commonly used. They are designed for single engines to 350 hp and multiple outboard engine installations with total power to 700 hp in counter rotating applications. Before ordering, determine the best application for the boat based on hull design, speed, and usage.Side mount cylinders are unbalanced and offer 4.8 or 5.7 turns lock-to-lock. It is suitable for shallow splashwells and use on engines fitted with power steering. For single engines to 300 hp and multiple outboard engine installations with total power to 600 hp in counter rotating applications.Splashwell Mount cylinders are an unbalanced, light duty alternative to front & side mount with 5.5 or 6.5 turns lock-to-lock for engines with or without support tubes. For single engines to 300 hp and multiple outboard engine installations with total power to 600 hp in counter rotating applications. It can be transom or hull mounted.

Seastar Ha6801 Hardware Kit Only | Use For Hc6845 Tournament Series Single Engine Single Cylinder - Ha6801 - 1-Ha6801F1

Hardware Kit

Seastar Ha6802 Hardware Kit Only | Use For Hc6845 Tournament Series Twin Engine Single Cylinder - Ha6802 - 1-Ha6802F1

Hardware Kit

Seastar Ha6804 Hardware Kit Only | Use For Hc6845 Tournament Series Twin Engine Dual Cylinder - Ha6804 - 1-Ha6804F1

Hardware Kit

Seastar Ha6806 Hardware Kit Only | Use For Hc6845 Tournament Series Triple Engine Dual Cylinder - Ha6806 - 1-Ha6806F1

Hardware Kit

Seastar Hc46453 Basic Baystar Compact Cylinder - Hc4645-3 - 1-Hc46453F1

This balanced cylinder features a compact design that fits most splashwells. BayStar allows you to install all of the safety, reliability and comfort of hydraulic steering onto your boats rated up to MAX. 150HP (Total). Combine this with the superior design, rigid ISO quality control and teamed with the finest materials and precision manufacturing.See Seastar Solutions catalog or website for specific year and model applications.

Seastar Hc46473 Baystar Outboard 8" Stroke 7.24 Cubic Inch Cylinder - Hc4647-3 - 1-Hc46473F1

This balanced cylinder features a compact design that fits most splashwells. BayStar allows you to install all of the safety, reliability and comfort of hydraulic steering onto your boats rated up to MAX. 150HP (Total). Combine this with the superior design, rigid ISO quality control and teamed with the finest materials and precision manufacturing.See Seastar Solutions catalog or website for specific year and model applications.

Seastar Hc46483 Baystar Outboard 8" Stroke 7.24 Cubic Inch Cylinder - Hc4648-3 - 1-Hc46483F1

This balanced cylinder features a compact design that fits most splashwells. BayStar allows you to install all of the safety, reliability and comfort of hydraulic steering onto your boats rated up to MAX. 150HP (Total). Combine this with the superior design, rigid ISO quality control and teamed with the finest materials and precision manufacturing.See Seastar Solutions catalog or website for specific year and model applications.

Seastar Hc46583 Baystar Outboard 8" Stroke 7.24 Cubic Inch Cylinder - Hc4658-3 - 1-Hc46583F1

This balanced cylinder features a compact design that fits most splashwells. BayStar allows you to install all of the safety, reliability and comfort of hydraulic steering onto your boats rated up to MAX. 150HP (Total). Combine this with the superior design, rigid ISO quality control and teamed with the finest materials and precision manufacturing.See Seastar Solutions catalog or website for specific year and model applications.

Seastar Hc5313-3 Inboard 7" Stroke 8.3 Cubic Inch Atm Aluminum Cylinder - Model Ba135-7Atm - Hc5313-3 - 1-Hc53133F1

These cylinders are for single and dual rudder vessels with two axis articulation and offer easy autopilot interface. Cylinders are supplied with bleeder fittings.

Seastar Hc5351 Capilano Inboard 7" Stroke Ball Joint Cylinder - Hc5351 - 1-Hc5351F1

A wide choice of cylinder configurations make it easy to spec a system which can handle a variety of large boat performance requirements and accommodate most user preferences. Heavy duty brass and stainless steel cylinders. Two-axis articulation. Easy installation for single or dual rudder vessels.

Seastar Hc53733 Capilano Inboard 9" Stroke Ball Joint Cylinder - Hc5373-3 - 1-Hc53733F1

A wide choice of cylinder configurations make it easy to spec a system which can handle a variety of large boat performance requirements and accommodate most user preferences. Heavy duty brass and stainless steel cylinders. Two-axis articulation. Easy installation for single or dual rudder vessels.

Seastar Hf6005 Orb Tee Fitting Kit - 3/8" Tube - 2 Per Kit - Hf6005 - 1-Hf6005F1

Tournament series ORB tee fitting kit.

Seastar Hf6006 Stainless Steel Vertical Tee Fitting For Seastar Steering Cylinders & Helm Pumps - 2 Per Kit - Hf6006 - 1-Hf6006F1

These fittings fit updated Seastar cylinders and all helm pump to use O-Ring (ORB) type fittings. Before the update all Seastar Solutions helms used NPT fittings. These 316 stainless steel fittings will simplify the installation process and will allow for simple reorientation of fittings after installation. New ORB type helms are clearly marked with "DO NOT USE NPT Fitting". Cylinder Part Numbers ending in "-3" are the new updated cylinder models that use these ORB fittings.

Seastar Hf6007 Fitting Kit With 25' Tubing (Ht5092) For Seastar Helms - Use For -3 Models Only - Hf6007 - 1-Hf6007F1

These fittings fit updated Seastar cylinders and all helm pump to use O-Ring (ORB) type fittings. Before the update all Seastar Solutions helms used NPT fittings. These 316 stainless steel fittings will simplify the installation process and will allow for simple reorientation of fittings after installation. New ORB type helms are clearly marked with "DO NOT USE NPT Fitting". Cylinder Part Numbers ending in "-3" are the new updated cylinder models that use these ORB fittings.

Seastar Hf6008 1/2" Nf Nylon Brass Nuts, 6/Sets - Hf6008 - 1-Hf6008F1

SeaStar HF6008 1/2" NF Nylon Brass Nuts, 6/pk

Seastar Hf6009 Straight 3/8" Fitting Kit For Seastar & Baystar Helm Pumps - 2 Per Kit - Hf6009 - 1-Hf6009F1

These fittings fit updated Seastar cylinders and all helm pump to use O-Ring (ORB) type fittings. Before the update all Seastar Solutions helms used NPT fittings. These 316 stainless steel fittings will simplify the installation process and will allow for simple reorientation of fittings after installation. New ORB type helms are clearly marked with "DO NOT USE NPT Fitting". Cylinder Part Numbers ending in "-3" are the new updated cylinder models that use these ORB fittings.

Seastar Hf6010 3/8" Fitting Kit For Seastar Helms - Hf6010 - 1-Hf6010F1

These fittings fit updated Seastar cylinders and all helm pump to use O-Ring (ORB) type fittings. Before the update all Seastar Solutions helms used NPT fittings. These 316 stainless steel fittings will simplify the installation process and will allow for simple reorientation of fittings after installation. New ORB type helms are clearly marked with "DO NOT USE NPT Fitting". Cylinder Part Numbers ending in "-3" are the new updated cylinder models that use these ORB fittings.

Seastar Hf6011 45 Degree Elbow 3/8" Fitting For Seastar & Baystar Helm Pumps - 2 Per Kit - Hf6011 - 1-Hf6011F1

These fittings fit updated Seastar cylinders and all helm pump to use O-Ring (ORB) type fittings. Before the update all Seastar Solutions helms used NPT fittings. These 316 stainless steel fittings will simplify the installation process and will allow for simple reorientation of fittings after installation. New ORB type helms are clearly marked with "DO NOT USE NPT Fitting". Cylinder Part Numbers ending in "-3" are the new updated cylinder models that use these ORB fittings.

Seastar Hf6012 5 Orb (M) 1/4" Npt (F) Fitting Kit For Seastar Helms - 3 Per Kit - Hf6012 - 1-Hf6012F1

These fittings fit updated Seastar cylinders and all helm pump to use O-Ring (ORB) type fittings. Before the update all Seastar Solutions helms used NPT fittings. These 316 stainless steel fittings will simplify the installation process and will allow for simple reorientation of fittings after installation. New ORB type helms are clearly marked with "DO NOT USE NPT Fitting". Cylinder Part Numbers ending in "-3" are the new updated cylinder models that use these ORB fittings.

Seastar Ho5009 Tie Bar Kit For Side Mount Cylinder - Ho5009 - 1-Ho5009F1

SeaStar HO5009 Tie Bar Kit for Side Mount Cylinder. Includes bar and extension plate for twin engines.

Seastar Ho5035 Engine Adapter Plate For Single Mercury (1989 To Date) - Ho5035 - 1-Ho5035F1

SeaStar HO5035 Engine Adapter Plate for Single Mercury (1989 to Date). Includes bar and extension plate for twin engines.

Seastar Ho6003 Universal Tie Bar Kit For Port Engine To Drive Cylinder - Ho6003 - 1-Ho6003F1

SeaStar HO6003 Universal Tie Bar Kit for Port Engine to Drive Cylinder.

Seastar Ho6010 36" Mechanical Tie Bar Kit For Small Kicker Trolling Motor - Ho6010 - 1-Ho6010F1

For hooking up a small kicker motor for trolling. Compatible with HC5345 or HC5358 steering cylinders.

Seastar Ho6819 Tournament Series Adjustable Tie Bar - Ho6819 - 1-Ho6819F1

The new Tournament Series Tie Bar features an exclusive design with an anodized aluminum body, stainless steel rod ends, and an adjustable threaded design with a maximum stroke indicator. No cutting involved and toe angles can be easily adjusted. Multiple engine configurations also require tie bar kit(s). All configurations require a hardware kit. Multiple engine configurations also require tie bar kit(s).These products are for new style tournament cylinder applications. New and existing tournament cylinder parts are not interchangeable.

Seastar Ho6820 Tournament Series Adjustable Tie Bar - Ho6820 - 1-Ho6820F1

The new Tournament Series Tie Bar features an exclusive design with an anodized aluminum body, stainless steel rod ends, and an adjustable threaded design with a maximum stroke indicator. No cutting involved and toe angles can be easily adjusted. Multiple engine configurations also require tie bar kit(s). All configurations require a hardware kit. Multiple engine configurations also require tie bar kit(s).These products are for new style tournament cylinder applications. New and existing tournament cylinder parts are not interchangeable.

Seastar Ho6821 Tournament Series Adjustable Tie Bar - Ho6821 - 1-Ho6821F1

The new Tournament Series Tie Bar features an exclusive design with an anodized aluminum body, stainless steel rod ends, and an adjustable threaded design with a maximum stroke indicator. No cutting involved and toe angles can be easily adjusted. Multiple engine configurations also require tie bar kit(s). All configurations require a hardware kit. Multiple engine configurations also require tie bar kit(s). These products are for new style tournament cylinder applications. New and existing tournament cylinder parts are not interchangeable.

Seastar Ho6822 Tournament Series Adjustable Tie Bar - Ho6822 - 1-Ho6822F1

The new Tournament Series Tie Bar features an exclusive design with an anodized aluminum body, stainless steel rod ends, and an adjustable threaded design with a maximum stroke indicator. No cutting involved and toe angles can be easily adjusted. Multiple engine configurations also require tie bar kit(s). All configurations require a hardware kit. Multiple engine configurations also require tie bar kit(s).These products are for new style tournament cylinder applications. New and existing tournament cylinder parts are not interchangeable.

Seastar Ho6823 Tournament Series Adjustable Tie Bar - Ho6823 - 1-Ho6823F1

The new Tournament Series Tie Bar features an exclusive design with an anodized aluminum body, stainless steel rod ends, and an adjustable threaded design with a maximum stroke indicator. No cutting involved and toe angles can be easily adjusted. Multiple engine configurations also require tie bar kit(s). All configurations require a hardware kit. Multiple engine configurations also require tie bar kit(s).These products are for new style tournament cylinder applications. New and existing tournament cylinder parts are not interchangeable.

Seastar Hp6001 Hydraulic Hardware Kit | Includes Cap Screw, Hex Head, 3/8" Nf X 1 1/4" Sst, 3/Sets - Hp6001 - 1-Hp6001F1

Seastar Hp6003 Ball Joint For Tie Bar | 1/2" Sst - Hp6003 - 1-Hp6003F1

SeaStar HP6003 Ball Joint for Tie Bar | 1/2" SST.

Seastar Hp6007 Hydraulic Hardware Kit | Includes Bolt, Hex Head & Nut 3/8" X 1 5/8", 3/Sets - Hp6007 - 1-Hp6007F1

Seastar Hp6016 Support Rod For Front Mount & Outboard Cylinders - Hp6016 - 1-Hp6016F1

SeaStar HP6016 Support Rod for Front Mount & Outboard Cylinders.

Seastar Hp6031 Mounting Hardware & Slide Plate For Outboard Cylinder - Hp6031 - 1-Hp6031F1

SeaStar HP6031 Mounting Hardware & Slide Plate for Outboard Cylinder.

Seastar Hp6033 Mounting Hardware For Outboard Pivot Plate Cylinder - Hp6033 - 1-Hp6033F1

SeaStar HP6033 Mounting Hardware for Outboard Pivot Plate Cylinder.

Seastar Hp6033 Pivot Cylinder Mounting Hardware Kit - Hp6036 - 1-Hp6036F1

Pivot cylinder mounting hardware kit for outboard front mount cylinder

Seastar Hp6044 Bleed Nipple Caps For All Seastar Cylinders, 12/Bag - Hp6044 - 1-Hp6044F1

Bleed nipple caps for all Seastar Cylinders

Seastar Hp6050 Support Rod For Baystar Cylinder, 2/Bag - Hp6050 - 1-Hp6050F1

Support rod for Baystar Cyliner only

Seastar Hp6148 Helm Adapter Kit For Power Purge Jr. - Hp6148 - 1-Hp6148F1

Helm Adapter Kit for Power Purge Jr.

Seastar Ht4420H Baystar 20' Tubing Kit | Includes 2 Pieces Per Kit - Ht4420H - 1-Ht4420Hf1

Can be used with all BayStar helms with appropriate fittings. Kit contains two cut lengths of tubing.(NOTE: BayStar Cylinders with H suffix must use tubing part number with H suffix.)

Seastar Ht4430H Baystar 30' Tubing Kit - Includes 2 Pieces Per Kit - Ht4430H - 1-Ht4430Hf1

Can be used with all BayStar helms with appropriate fittings. Kit contains two cut lengths of tubing.(NOTE: BayStar Cylinders with H suffix must use tubing part number with H suffix.)

Seastar Jack Plate Mounting Bolt Kit (Includes 4 Each Stainless Steel Bolts, Brass Nylock Nuts And Washers) - Dk6125 - 861-Dk6125F1

Package includes 4 each: Stainless steel bolts, brass nylock nuts and stainless steel washers.

Seastar Jack Plate Mounting Bolt Kit (Includes 4 Each Stainless Steel Bolts, Brass Nylock Nuts And Washers) - Dk6135 - 861-Dk6135F1

Package includes 4 each: Stainless steel bolts, brass nylock nuts and stainless steel washers.

Seastar Jack Plate Mounting Bolt Kit (Includes 4 Each Stainless Steel Bolts, Brass Nylock Nuts And Washers) - Dk6145 - 861-Dk6145F1

Package includes 4 each: Stainless steel bolts, brass nylock nuts and stainless steel washers.

Seastar Kicker Motor Cable For Manual Steering Auxiliary Engine - Ho6116 - 1-Ho6116F1

Allows a user to manually steer an auxiliary engine (kicker motor) using most existing Seastar hydraulic steering systems. Design incorporates a Seastar Solutions Xtreme cable as the linkage between the two engines.Features: Flexible cable allows for adjustable locations of kicker motorAllows independent trim/tilt and full steering strokeRetrofittable to most SeaStar Front Mount Cylinders20 hp rating (uses 40 series Xtreme cable)Includes: Cable Assy, Link Arm, Cylinder Drive Plate, 2 Support Brackets, Fasteners Does not include the drive/drag link from the kicker motor to the end of the kicker steering cable.

Seastar Kicker Motor Cable For Manual Steering Auxiliary Engine - Ho6122 - 1-Ho6122F1

Allows a user to manually steer an auxiliary engine (kicker motor) using most existing Seastar hydraulic steering systems. Design incorporates a Seastar Solutions Xtreme cable as the linkage between the two engines.Features: Flexible cable allows for adjustable locations of kicker motorAllows independent trim/tilt and full steering strokeRetrofittable to most SeaStar Front Mount Cylinders20 hp rating (uses 40 series Xtreme cable)Includes: Cable Assy, Link Arm, Cylinder Drive Plate, 2 Support Brackets, Fasteners Does not include the drive/drag link from the kicker motor to the end of the kicker steering cable.

Seastar Kicker Motor Cable For Manual Steering Auxiliary Engine - Ho6128 - 1-Ho6128F1

Allows a user to manually steer an auxiliary engine (kicker motor) using most existing Seastar hydraulic steering systems. Design incorporates a Seastar Solutions Xtreme cable as the linkage between the two engines.Features: Flexible cable allows for adjustable locations of kicker motorAllows independent trim/tilt and full steering strokeRetrofittable to most SeaStar Front Mount Cylinders20 hp rating (uses 40 series Xtreme cable)Includes: Cable Assy, Link Arm, Cylinder Drive Plate, 2 Support Brackets, Fasteners Does not include the drive/drag link from the kicker motor to the end of the kicker steering cable.

Seastar Kicker Motor Cable For Manual Steering Auxiliary Engine - Ho6134 - 1-Ho6134F1

Allows a user to manually steer an auxiliary engine (kicker motor) using most existing Seastar hydraulic steering systems. Design incorporates a Seastar Solutions Xtreme cable as the linkage between the two engines.Features: Flexible cable allows for adjustable locations of kicker motorAllows independent trim/tilt and full steering strokeRetrofittable to most SeaStar Front Mount Cylinders20 hp rating (uses 40 series Xtreme cable)Includes: Cable Assy, Link Arm, Cylinder Drive Plate, 2 Support Brackets, Fasteners Does not include the drive/drag link from the kicker motor to the end of the kicker steering cable.

Seastar Manual Jack Plate With Side Locks For Engines Up To 300 Hp, Max Engine Weight 585 Lbs. - Jp1040Ss - 861-Jp1040Ssf1

Interlocking slide guides offer enhanced strength and smooth, bind-free travel Pre-greased stainless steel lead screw for smooth operationPrecision machining from work-hardened, extruded billet for strengthMilitary standard anodized surfaces for corrosion resistanceStainless steel hardware2 year warranty

Seastar Manual Jack Plate With Side Locks For Engines Up To 300 Hp, Max Engine Weight 585 Lbs. - Jp1060Ss - 861-Jp1060Ssf1

Interlocking slide guides offer enhanced strength and smooth, bind-free travel Pre-greased stainless steel lead screw for smooth operationPrecision machining from work-hardened, extruded billet for strengthMilitary standard anodized surfaces for corrosion resistanceStainless steel hardware2 year warranty

Seastar Manual Jack Plate With Side Locks For Engines Up To 300 Hp, Max Engine Weight 585 Lbs. - Jp1080Ss - 861-Jp1080Ssf1

Interlocking slide guides offer enhanced strength and smooth, bind-free travel Pre-greased stainless steel lead screw for smooth operationPrecision machining from work-hardened, extruded billet for strengthMilitary standard anodized surfaces for corrosion resistanceStainless steel hardware2 year warranty

Seastar Manual Jack Plate With Side Locks For Engines Up To 300 Hp, Max Engine Weight 585 Lbs. - Jp1100Ss - 861-Jp1100Ssf1

Interlocking slide guides offer enhanced strength and smooth, bind-free travel Pre-greased stainless steel lead screw for smooth operationPrecision machining from work-hardened, extruded billet for strengthMilitary standard anodized surfaces for corrosion resistanceStainless steel hardware2 year warranty

Seastar Nut, Adjusting For All Front Mount O/B Cylinders - Hp6034 - 1-Hp6034F1

Adjusting Nut for all front mount O/B Cylinders

Seastar Pro® Hk7500A3 Hydraulic Steering Kit Without Hose - Hk7500-4 - 1-Hk75004F1

Seastar Pro Hydraulic Steering Kit without Hoses. For high performance applications up to 350HP including bass boats and other performance boats capable of speeds in excess of 65 MPH. Suitable for use with high-performance propellers and jack plates. Low friction hydraulic steering systemStandard 3/4" tapered steering shaft4.25 turns lock-to-lockCompact helm with a 4-7/16" footprint, needs only 3" dash holePackaged with: HH57703 SeaStar PRO 2.0 Front Mount Helm, HC63453 Front Mount Cylinder,HA5430 (2) - SeaStar Oil (Quart), Instructions

Seastar Quick Connect Hose Ends - Hp6170 - 1-Hp6170F1

Quick Connect Hose Ends

Seastar Smartstick Raymarine Rudder Reference Unit - Ar4502Rm - 1-Ar4502Rmf1

SmartStick is a non-contact autopilot position sensor that mounts to outboard front mount cylinders. For Raymarine autopilots.

Seastar Solutions 022328 Clutch Detent Kit - 22328 - 1-022328F1

Clutch Detent Kit

Seastar Solutions 039489002 In Series Dual Station Kit - 30 Series - 039489-002 - 1-039489002F1

In Series dual station kit - 30 series(2 required for twin control)

Seastar Solutions 047307 Neutral Safety Switch Kit For S Controls - 47307 - 1-047307F1

Neutral Safety Switch Kit for S Controls

Seastar Solutions 051801033 Sl3 Control Neutral Safety Switch - 051801-033 - 1-051801033F1

Neutral Safety Switch for SL-3 Side Mount Controls.

Seastar Solutions 3300 Series Control Cable Assembly - Cc23011 - 1-Cc23011 Superseded By: 1-Ccx63311F1

Stainless steel and brass fittings. Universal type cables are designed to fit aftermarket engine controls as well as OEM controls from BMW, Chrysler, Honda, Mercury Sport Jet, Nissan, Suzuki, Volvo, Yamaha, and others. 10/32" threads. For I/O's, inboards, and outboards. 3" nominal travel. 8" Min. bend radius.

Seastar Solutions 3300 Series Control Cable Assembly - Cc23012 - 1-Cc23012 Superseded By: 1-Ccx63312F1

Stainless steel and brass fittings. Universal type cables are designed to fit aftermarket engine controls as well as OEM controls from BMW, Chrysler, Honda, Mercury Sport Jet, Nissan, Suzuki, Volvo, Yamaha, and others. 10/32" threads. For I/O's, inboards, and outboards. 3" nominal travel. 8" Min. bend radius.

Seastar Solutions 3300 Series Control Cable Assembly - Cc23013 - 1-Cc23013 Superseded By: 1-Ccx63313F1

Stainless steel and brass fittings. Universal type cables are designed to fit aftermarket engine controls as well as OEM controls from BMW, Chrysler, Honda, Mercury Sport Jet, Nissan, Suzuki, Volvo, Yamaha, and others. 10/32" threads. For I/O's, inboards, and outboards. 3" nominal travel. 8" Min. bend radius.

Seastar Solutions 3300 Tfxtreme Control Cable Assembly - Ccx63306 - 1-Ccx63306F1

Stainless steel and brass fittings. Universal type cables are designed to fit aftermarket engine controls as well as OEM controls from BMW, Chrysler, Honda, Mercury Sport Jet, Nissan, Suzuki, Volvo, Yamaha, and others. For I/O's, inboards, and outboards. TFXtreme cables feature a splined-core for easy movement and minimum lost motion (4" min. bend radius). Specifically designed for complex and/or long cable runs, but they will allow any control to operate more easily with less drag and wear. 10/32" threads. 4" nominal travel.

Seastar Solutions 3300 Tfxtreme Control Cable Assembly - Ccx63307 - 1-Ccx63307F1

Stainless steel and brass fittings. Universal type cables are designed to fit aftermarket engine controls as well as OEM controls from BMW, Chrysler, Honda, Mercury Sport Jet, Nissan, Suzuki, Volvo, Yamaha, and others. For I/O's, inboards, and outboards. TFXtreme cables feature a splined-core for easy movement and minimum lost motion (4" min. bend radius). Specifically designed for complex and/or long cable runs, but they will allow any control to operate more easily with less drag and wear. 10/32" threads. 4" nominal travel.

Seastar Solutions 3300 Tfxtreme Control Cable Assembly - Ccx63308 - 1-Ccx63308F1

Stainless steel and brass fittings. Universal type cables are designed to fit aftermarket engine controls as well as OEM controls from BMW, Chrysler, Honda, Mercury Sport Jet, Nissan, Suzuki, Volvo, Yamaha, and others. For I/O's, inboards, and outboards. TFXtreme cables feature a splined-core for easy movement and minimum lost motion (4" min. bend radius). Specifically designed for complex and/or long cable runs, but they will allow any control to operate more easily with less drag and wear. 10/32" threads. 4" nominal travel.

Seastar Solutions 3300 Tfxtreme Control Cable Assembly - Ccx63309 - 1-Ccx63309F1

Stainless steel and brass fittings. Universal type cables are designed to fit aftermarket engine controls as well as OEM controls from BMW, Chrysler, Honda, Mercury Sport Jet, Nissan, Suzuki, Volvo, Yamaha, and others. For I/O's, inboards, and outboards. TFXtreme cables feature a splined-core for easy movement and minimum lost motion (4" min. bend radius). Specifically designed for complex and/or long cable runs, but they will allow any control to operate more easily with less drag and wear. 10/32" threads. 4" nominal travel.

Seastar Solutions 3300 Tfxtreme Control Cable Assembly - Ccx63310 - 1-Ccx63310F1

Stainless steel and brass fittings. Universal type cables are designed to fit aftermarket engine controls as well as OEM controls from BMW, Chrysler, Honda, Mercury Sport Jet, Nissan, Suzuki, Volvo, Yamaha, and others. For I/O's, inboards, and outboards. TFXtreme cables feature a splined-core for easy movement and minimum lost motion (4" min. bend radius). Specifically designed for complex and/or long cable runs, but they will allow any control to operate more easily with less drag and wear. 10/32" threads. 4" nominal travel.

Seastar Solutions 3300 Tfxtreme Control Cable Assembly - Ccx63311 - 1-Ccx63311F1

Stainless steel and brass fittings. Universal type cables are designed to fit aftermarket engine controls as well as OEM controls from BMW, Chrysler, Honda, Mercury Sport Jet, Nissan, Suzuki, Volvo, Yamaha, and others. For I/O's, inboards, and outboards. TFXtreme cables feature a splined-core for easy movement and minimum lost motion (4" min. bend radius). Specifically designed for complex and/or long cable runs, but they will allow any control to operate more easily with less drag and wear. 10/32" threads. 4" nominal travel.

Seastar Solutions 3300 Tfxtreme Control Cable Assembly - Ccx63312 - 1-Ccx63312F1

Stainless steel and brass fittings. Universal type cables are designed to fit aftermarket engine controls as well as OEM controls from BMW, Chrysler, Honda, Mercury Sport Jet, Nissan, Suzuki, Volvo, Yamaha, and others. For I/O's, inboards, and outboards. TFXtreme cables feature a splined-core for easy movement and minimum lost motion (4" min. bend radius). Specifically designed for complex and/or long cable runs, but they will allow any control to operate more easily with less drag and wear. 10/32" threads. 4" nominal travel.

Seastar Solutions 3300 Tfxtreme Control Cable Assembly - Ccx63313 - 1-Ccx63313F1

Stainless steel and brass fittings. Universal type cables are designed to fit aftermarket engine controls as well as OEM controls from BMW, Chrysler, Honda, Mercury Sport Jet, Nissan, Suzuki, Volvo, Yamaha, and others. For I/O's, inboards, and outboards. TFXtreme cables feature a splined-core for easy movement and minimum lost motion (4" min. bend radius). Specifically designed for complex and/or long cable runs, but they will allow any control to operate more easily with less drag and wear. 10/32" threads. 4" nominal travel.

Seastar Solutions 3300 Tfxtreme Control Cable Assembly - Ccx63314 - 1-Ccx63314F1

Stainless steel and brass fittings. Universal type cables are designed to fit aftermarket engine controls as well as OEM controls from BMW, Chrysler, Honda, Mercury Sport Jet, Nissan, Suzuki, Volvo, Yamaha, and others. For I/O's, inboards, and outboards. TFXtreme cables feature a splined-core for easy movement and minimum lost motion (4" min. bend radius). Specifically designed for complex and/or long cable runs, but they will allow any control to operate more easily with less drag and wear. 10/32" threads. 4" nominal travel.

Seastar Solutions 3300 Tfxtreme Control Cable Assembly - Ccx63315 - 1-Ccx63315F1

Stainless steel and brass fittings. Universal type cables are designed to fit aftermarket engine controls as well as OEM controls from BMW, Chrysler, Honda, Mercury Sport Jet, Nissan, Suzuki, Volvo, Yamaha, and others. For I/O's, inboards, and outboards. TFXtreme cables feature a splined-core for easy movement and minimum lost motion (4" min. bend radius). Specifically designed for complex and/or long cable runs, but they will allow any control to operate more easily with less drag and wear. 10/32" threads. 4" nominal travel.

Seastar Solutions 3300 Tfxtreme Control Cable Assembly - Ccx63316 - 1-Ccx63316F1

Stainless steel and brass fittings. Universal type cables are designed to fit aftermarket engine controls as well as OEM controls from BMW, Chrysler, Honda, Mercury Sport Jet, Nissan, Suzuki, Volvo, Yamaha, and others. For I/O's, inboards, and outboards. TFXtreme cables feature a splined-core for easy movement and minimum lost motion (4" min. bend radius). Specifically designed for complex and/or long cable runs, but they will allow any control to operate more easily with less drag and wear. 10/32" threads. 4" nominal travel.

Seastar Solutions 3300 Tfxtreme Control Cable Assembly - Ccx63317 - 1-Ccx63317F1

Stainless steel and brass fittings. Universal type cables are designed to fit aftermarket engine controls as well as OEM controls from BMW, Chrysler, Honda, Mercury Sport Jet, Nissan, Suzuki, Volvo, Yamaha, and others. For I/O's, inboards, and outboards. TFXtreme cables feature a splined-core for easy movement and minimum lost motion (4" min. bend radius). Specifically designed for complex and/or long cable runs, but they will allow any control to operate more easily with less drag and wear. 10/32" threads. 4" nominal travel.

Seastar Solutions 3300 Tfxtreme Control Cable Assembly - Ccx63318 - 1-Ccx63318F1

Stainless steel and brass fittings. Universal type cables are designed to fit aftermarket engine controls as well as OEM controls from BMW, Chrysler, Honda, Mercury Sport Jet, Nissan, Suzuki, Volvo, Yamaha, and others. For I/O's, inboards, and outboards. TFXtreme cables feature a splined-core for easy movement and minimum lost motion (4" min. bend radius). Specifically designed for complex and/or long cable runs, but they will allow any control to operate more easily with less drag and wear. 10/32" threads. 4" nominal travel.

Seastar Solutions 3300 Tfxtreme Control Cable Assembly - Ccx63319 - 1-Ccx63319F1

Stainless steel and brass fittings. Universal type cables are designed to fit aftermarket engine controls as well as OEM controls from BMW, Chrysler, Honda, Mercury Sport Jet, Nissan, Suzuki, Volvo, Yamaha, and others. For I/O's, inboards, and outboards. TFXtreme cables feature a splined-core for easy movement and minimum lost motion (4" min. bend radius). Specifically designed for complex and/or long cable runs, but they will allow any control to operate more easily with less drag and wear. 10/32" threads. 4" nominal travel.

Seastar Solutions 3300 Tfxtreme Control Cable Assembly - Ccx63320 - 1-Ccx63320F1

Stainless steel and brass fittings. Universal type cables are designed to fit aftermarket engine controls as well as OEM controls from BMW, Chrysler, Honda, Mercury Sport Jet, Nissan, Suzuki, Volvo, Yamaha, and others. For I/O's, inboards, and outboards. TFXtreme cables feature a splined-core for easy movement and minimum lost motion (4" min. bend radius). Specifically designed for complex and/or long cable runs, but they will allow any control to operate more easily with less drag and wear. 10/32" threads. 4" nominal travel.

Seastar Solutions 3300 Tfxtreme Control Cable Assembly - Ccx63321 - 1-Ccx63321F1

Stainless steel and brass fittings. Universal type cables are designed to fit aftermarket engine controls as well as OEM controls from BMW, Chrysler, Honda, Mercury Sport Jet, Nissan, Suzuki, Volvo, Yamaha, and others. For I/O's, inboards, and outboards. TFXtreme cables feature a splined-core for easy movement and minimum lost motion (4" min. bend radius). Specifically designed for complex and/or long cable runs, but they will allow any control to operate more easily with less drag and wear. 10/32" threads. 4" nominal travel.