Transducer Accessories
GT17M-THF Galvanic Isolator Kit Use this to replace the galvanic isolation parts included with the GT17M-THF transducer. More Details
GT Transducer Thru-Hull Mounting Hardware Install your Garmin thru-hull scanning transducer easily with this mounting hardware. Includes an isolation plate, bushings, anti-rotation bolts, washers and ... More Details
GSD™ 26 Terminal Lid Terminal Lid for Garmin's GSD™ 26WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproduc... More Details
Extension Cable with XID - 12-Pin - 30' Extend the cable length of your compatible 12-pin transducer with this 30 foot (9 meter) cable. Supports 12-pin Airmar transducer with XID.WARNING: This product... More Details
Extension Cable with XID - 12-Pin - 10' Extend the cable length of your compatible 12-pin transducer with this 10 foot (3 meter) cable. Supports 12-pin Airmar transducers with XID.WARNING: This produc... More Details
Garmin Bare Wire Transducer to 12-Pin Sounder Wire Block Adapter
Transducer Accessories, Garmin
$116.44
Bare Wire Transducer to 12-Pin Sounder Wire Block Adapter Connect a compatible bare wire transducer to a Garmin 12-pin sounder connector with this wire block adapter. Compatible Devices: GPSMAP® 7607x... More Details
Adapter Cable To Connect GT30 T/M to P729/P79 Connect a Garmin GT30 transom mount scanning transducer and an Airmar P72 or P79 in-hull mount traditional transducer to a compatible echoMAP™ chartplotte... More Details
8-Pin Transducer to 4-Pin Sounder Adapter Cable Connect an 8-pin transducer to a 4-pin sonar port on a compatible marine device with this adapter cable. Compatible Devices: STRIKER™ 4 STRIKER™ 4 Porta... More Details
8-Pin Transducer to 12-Pin Sounder Adapter Cable w/XID Use this adapter cable to connect an 8-pin transducer with XID to a 12-pin sonar port on a compatible marine device. WARNING: This product can ex... More Details
8-Pin Transducer Extension Cable - 30' Connect your transducer to your sonar device with this 30'(9M) 8-pin extension cable. WARNING: This product can expose you to chemicals which are known to the St... More Details
8-Pin Trnasducer Extension Cable- 10' Connect your transducer to your sonar device with this 10'(3M) 8-pin extension cable. WARNING: This product can expose you to chemicals which are known to the Sta... More Details
Garmin 8-Pin Female to Wire Block Adapter f/echoMAP™ 50s & 70s, GPSMAP® 4xx, 5xx & 7xx, GSD™& 24
Transducer Accessories, Garmin
$109.59
8-Pin Female to Wire Block Adapter Garmin's adapter allows you to connect the wires on legacy 6-pin transducers with newer sonar that requires an 8-pin connection. WARNING: This product can expose you... More Details
8 Degree Pole Mount f/Livescope Plus LVS34 Position your LiveScope™ Plus LVS34 transducer on this 8-degree pole mount for an optimal viewing angle while ice fishing (works for open water fishing too). More Details
6-Pin Female to 8-Pin Male Adapter This adapter allows you to connect newer 8-pin transducers to devices that require a 6-pin connector.WARNING: This product can expose you to chemicals which are know... More Details
4-Pin Transducer to 8-Pin Sonar Port Connect a 4-pin transducer to an 8-pin sonar port on your compatible marine device with this adapter cable. WARNING: This product can expose you to chemicals which... More Details
4-Pin Transducer to 12-Pin Sounder Adapter Cable Connect a 4-pin transducer to a 12-pin sonar port on your compatible marine device with this adapter cable. WARNING: This product can expose you to che... More Details
Transducer Extension Cable Use this 10' (3M) extension cable to connect your 4-pin transducer to your sonar unit. Compatible Devices: echo™ 100 echo™ 150 echo™ 200 echo™ 300c echo™ 500c echo™ 550c WAR... More Details
Garmin 12-Pin Transducer Y-Cable Port/Starboard - 10m Connect a port/starboard pair of thru hull or transom mount transducers to the sonar unit with this 12-pin Y-cable. This cable allows the use of t... More Details
12-Pin To Dual 4-Pin Transducer Y-Cable Use this adapter cable when connecting a compatible 12-pin transducer to a compatible 4-pin Garmin device.WARNING: This product can expose you to chemicals whic... More Details
0 Degree Pole Mount f/Livescope Plus LVS34 Position your LiveScope™ Plus LVS34 transducer on this 0-degree pole mount for an optimal viewing angle while ice fishing (works for open water fishing too). More Details
0 Degree Livescope Pole Mount Position your Panoptix LiveScope™ LVS32 transducer on this 0 degree pole mount for an optimal viewing angle while ice fishing (works for open water fishing too). More Details
TZtouch3 Transducer Y-Cable 12-Pin to 2 Each 10-Pin Furuno's TZtouch3 transducer Y-cable connects a 12-pin to 2 different 10-pin. This product may not be returned to the original point of purchase. Pl... More Details
MB1100 The MB1100 is a matching box for Furuno LCD sounders. It is used to connect a dual-frequency transducer to an appropriate Furuno LCD sounder. The MB1100 comes with a 10-pin connector already su... More Details
Furuno FCV800 Y-Cable f/Multi-Channel CHIRP Transducer 12-Pin to 2 10-Pin
Transducer Accessories, Furuno
$189.06
FCV800 Y-Cable f/Multi-Channel CHIRP Transducer Specifications: 12-Pin to 2 10-Pin Specifically for FCV800 For dual channel CHIRP transducer Y-cable This product may not be returned to the original p... More Details
The AIR-033-476 is a high performance fairing block for transducers utilizing the Airmar B-744V housing. WARNING: This product can expose you to chemicals which are known to the State of California to... More Details
The AIR-033-391 is a high-performance fairing block for transducers utilizing the Airmar B-260 housing. WARNING: This product can expose you to chemicals which are known to the State of California to ... More Details
AIR-033-351 The AIR-033-351 is a standard fairing block for transducers utilizing the Airmar B-45 housing. WARNING: This product can expose you to chemicals which are known to the State of California ... More Details
Transducer Pigtail, 10-Pin(F), 2 MetersWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more ... More Details
Transducer Y-Cable, 10-Pin (F) to 10-Pin (M) and 6-Pin (M)WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproduct... More Details
The AIR-033-226 is a standard fairing block for transducers utilizing the Airmar B-256 housing. WARNING: This product can expose you to chemicals which are known to the State of California to cause ca... More Details
Adapter Cable, 8-Pin Transducer to 10-Pin SounderWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm.... More Details
Transducer Extension Cable, 10-Pin(M) to 10-Pin(f), 4 metersWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reprodu... More Details
Furuno AIR-033-073 Adapter Cable, 10-Pin Transducer to 8-Pin Sounder
Transducer Accessories, Furuno
$252.08
Adapter Cable, 10-Pin Transducer to 8-Pin SounderWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm.... More Details
50 Meter Cable Kit w/ Junction Box, FI5001 WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For m... More Details
12-Pin XDR Extension Cable - 10M Features: Extension Cable For Furuno Transducer 10M (33' Length) 12-Pin Color: Black This product may not be returned to the original point of purchase. Please contact... More Details
12-Pin Pigtail Cable for TZT3 Furuno's 12-Pin Pigtail Cable specifically for TZT3. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any... More Details
10-Pin to 12-Pin Adapter Cable (0.4m) for TZT3 Features: 10-Pin to 12-Pin ends Length: 0.4m Used specifically for Furuno's TZT3 This product may not be returned to the original point of purchase. Plea... More Details
Forward-Facing Motorized Sonar Mount The FORESIGHT Forward-Facing Sonar Mount is the most sophisticated mounting system on the market. It allows the sonar transducer to stow and deploy with the bow-mo... More Details
Echonautics Hydrodynamic Fairing Block f/CB131 Series Transducers
Transducer Accessories, Echonautics
$212.35
Hydrodynamic Fairing Block for CB131 Series Transducers Echonautics fairing blocks are made for the thru-hull installation of traditional stem transducers. A fairing block is recommended for the insta... More Details
Echonautics Hydrodynamic Fairing Block f/CB101 Series Transducers
Transducer Accessories, Echonautics
$120.56
Hydrodynamic Fairing Block for CB101 Series Transducers Echonautics fairing blocks are made for the thru-hull installation of traditional stem transducers. A fairing block is recommended for the insta... More Details
Echonautics 1M Adapter Cable w/Male 9-Pin Navico Connector f/Echonautics 300W, 600W & 1kW Transducers
Transducer Accessories, Echonautics
$68.50
1M Adapter Cable with Male 9-Pin Navico Connector for Echonautics 300W, 600W & 1kW Transducers Mix-n-match cable for use with Navico units. More Details
Echonautics 1M Adapter Cable w/Male 8-Pin Black Box Connector f/Echonautics 300W, 600W & 1kW Transducers
Transducer Accessories, Echonautics
$68.50
1M Adapter Cable with Male 8-Pin Black Box Connector for Echonautics 300W, 600W & 1kW Transducers Mix-n-match cable for use with SI-TEX NavPro units. More Details
Echonautics 1M Adapter Cable w/Female 8-Pin Garmin Connector f/Echonautics 300W, 600W & 1kW Transducers
Transducer Accessories, Echonautics
$68.50
1M Adapter Cable with Female 8-Pin Garmin Connector for Echonautics 300W, 600W & 1kW Transducers Mix-n-match cable for use with Garmin units. More Details
Transducer Mounting Plate Features: Marine-grade polymer plate will not warp or corrode Premium materials; unaffected by UV rays Mounts easily with only 2 screws All hardware included More Details
ST850 Paddlewheel & Valve Kit Includes: 1 Paddlewheel and Shaft 4 O-rings 1 Valve Sleeve This product may not be returned to the original point of purchase. Please contact the manufacturer directly wi... More Details
Airmar SS571 Stuffing Tube - Stainless Steel
Transducer Accessories, Airmar
$450.00
You save:
$56.89
SS571 Stuffing Tube - Stainless Steel Replacement Stuffing Tube for R99, R109C, R209, R309, R409C, R509C, R609, CM260, CM265C, PM265C, CM111C, CM599C, M180 and M188 and most other Transducer thru-cab... More Details
Airmar Single Handle Transducer Nut Wrench f/B260, SS260, B265C, B275C
Transducer Accessories, Airmar
$47.95
Single Handle Transducer Nut Wrench for B260, SS260, B265C, B275C 260-WR-2 fits B260, SS260, B265C and B275C. More Details
Airmar Raymarine 11-Pin High or Med Mix & Match Transducer CHIRP Cable f/CP470
Transducer Accessories, Airmar
$184.95
You save:
$20.54
Raymarine 11-Pin High or Med Mix & Match Transducer CHIRP Cable for CP470 Airmar MMC-11R CHIRP Mix and Match Transducer Cable 1M Raymarine 11-Pin. For use with Airmar's High or Med Single Band Mix an... More Details
Airmar P66 Transom Mounting Bracket - 2004 & Up
Transducer Accessories, Airmar
$41.81
You save:
$12.98
Transom Mounting Bracket for P66 Transducer - 2004 & upThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. More Details
Airmar No Connector Mix & Match CHIRP Cable - 1M
Transducer Accessories, Airmar
$184.95
You save:
$20.54
No Connector Mix & Match CHIRP Cable - 1M Airmar's Mix & Match CHIRP Cable with no connector. Features: Length: 1M No Connector This product may not be returned to the original point of purchase. Plea... More Details
Airmar Navico Mix & Match Cable f/Low-Frequency CHIRP Transducers - 9-Pin
Transducer Accessories, Airmar
$184.95
You save:
$20.54
Navico Mix & Match Cable for Low-Frequency CHIRP Transducers - 9-Pin Specifically for use with Airmar's Mix and Match CHIRP transducers up to 1kW (1,000W). This product may not be returned to the orig... More Details
Airmar Navico 9-Pin Mix & Match Chirp Cable - 1M
Transducer Accessories, Airmar
$184.95
You save:
$20.54
Navico 9-Pin Mix & Match Chirp Cable - 1M Airmar's 9-Pin Mix & Match Chirp Cable for Navico Med and High or Highwide Transducers Features: Length: 1M 9-Pin for Med, High, and Highwide Transducers, Sin... More Details
Airmar Navico 9-Pin Dual Mix & Match Cable f/Dual Element Transducers
Transducer Accessories, Airmar
$184.95
You save:
$20.54
Navico 9-Pin Dual Mix & Match Cable for Dual Element Transducers For dual-socket Navico/Lowrance/Simrad xSonic 9-pin equipment Mix and Match Cables for CHIRP Transducers Many CHIRP transducers are now... More Details
Airmar Navico 7-Pin Blue Mix & Match Chirp Cable - 1M
Transducer Accessories, Airmar
$184.95
You save:
$20.54
Navico 7-Pin Blue Mix & Match Chirp Cable - 1M Airmar's Mix & Match Chirp Cable for Navico. Features: Length: 1M 7-Pin Color: Blue This product may not be returned to the original point of purchase. P... More Details
Airmar MM1-DT-9N Mix and Match™ Navico, Lowrance, Simrad 9-Pin Cable
Transducer Accessories, Airmar
$184.95
You save:
$20.54
MM1-DT-9N Mix and Match™ Navico, Lowrance, Simrad 9-Pin Cable Mix and Match 1kW transducers are made as a common base transducer with a short (2m) cable attached, plus an interchangeable longer (8m) b... More Details
Airmar MM1-DST-RAYA Mix and Match™ Raymarine 6/9-Pin Cable
Transducer Accessories, Airmar
$184.95
You save:
$20.54
MM1-DST-RAYA Mix and Match™ Raymarine 6/9-Pin Cable Mix and Match 1kW transducers are made as a common base transducer with a short (2m) cable attached, plus an interchangeable longer (8m) brand-speci... More Details
Airmar MM1-DST-BL Mix and Match™ Navico, Lowrance, Simrad, Blue 8-Pin Cable
Transducer Accessories, Airmar
$184.95
You save:
$20.54
MM1-DST-BL Mix and Match™ Navico, Lowrance, Simrad, Blue 8-Pin Cable Mix and Match 1kW transducers are made as a common base transducer with a short (2m) cable attached, plus an interchangeable longer... More Details
Airmar MM1-DST-8G Mix and Match™ Garmin Blue 8-Pin Cable
Transducer Accessories, Airmar
$184.95
You save:
$20.54
MM1-DST-8G Mix and Match™ Garmin Blue 8-Pin Cable Mix and Match 1kW transducers are made as a common base transducer with a short (2m) cable attached, plus an interchangeable longer (8m) brand-specifi... More Details
Airmar MM1-DST-14HB Mix and Match™ Humminbird 14-Pin Cable
Transducer Accessories, Airmar
$184.95
You save:
$20.54
MM1-DST-14HB Mix and Match™ Humminbird 14-Pin Cable Mix and Match 1kW transducers are made as a common base transducer with a short (2m) cable attached, plus an interchangeable longer (8m) brand-speci... More Details
Airmar MM1-DST-10F Mix and Match™ Furuno 10-Pin Cable
Transducer Accessories, Airmar
$184.95
You save:
$20.54
MM1-DST-10F Mix and Match™ Furuno 10-Pin Cable Mix and Match 1kW transducers are made as a common base transducer with a short (2m) cable attached, plus an interchangeable longer (8m) brand-specific a... More Details
Airmar MM-HB Mix & Match™ Cable 5-Pin 600W Series w/Humminbird #9 Connector - 9M
Transducer Accessories, Airmar
$133.58
You save:
$17.12
MM-HB Mix & Match™ Cable 5-Pin 600W Series with Humminbird #9 Connector - 9M Specifications: Sensor Connector: MM Display Connector: HB Mix and Match Series: 5-Pin 600 Watt Country of Origin: USA Cabl... More Details
Airmar MM-9N Mix & Match Cable f/Simrad XSONIC Non-CHIRP Transducers
Transducer Accessories, Airmar
$133.58
You save:
$17.12
MM-9N Mix & Match Cable for Simrad XSONIC Non-CHIRP Transducers Mix and Match 600W transducers are made as a common base transducer with a short (2m) cable attached, plus an interchangeable longer (8m... More Details
Airmar MM-8G Mix & Match Cable f/600W Non-CHIRP Transducers
Transducer Accessories, Airmar
$133.58
You save:
$17.12
MM-8G Mix & Match Cable for 600W Non-CHIRP Transducers Mix and Match 600W transducers are made as a common base transducer with a short (2m) cable attached, plus an interchangeable longer (8m) brand-s... More Details
Airmar Mix & Match™ Cable, 5-Pin 600W Series w/Navico 7-Pin Blue Connector - 8M
Transducer Accessories, Airmar
$133.58
You save:
$17.12
Mix & Match™ Cable, 5-Pin 600W Series with Navico 7-Pin Blue Connector - 8M Works on Airmar Non-CHIRP Transducers with a mix-and-match connector for Lowrance, Simrad, and Navico Transducers. More Details
Airmar Mix & Match Cable f/Raymarine 600W Non-CHIRP Transducers
Transducer Accessories, Airmar
$133.58
You save:
$17.12
Mix & Match Cable for Raymarine 600W Non-CHIRP Transducers Mix and Match 600W transducers are made as a common base transducer with a short (2m) cable attached, plus an interchangeable longer (8m) bra... More Details
In-Hull Tank The tank is cut to the boat’s deadrise angle to ensure that the transducer is properly oriented for optimal performance. Features: 2KW/3KW in-hull tank only Fits: R199, R299, R399, R111, ... More Details
Airmar Humminbird 9-Pin Mix & Match Chirp Cable - 1M
Transducer Accessories, Airmar
$184.95
You save:
$20.54
Humminbird 9-Pin Mix & Match Chirp Cable - 1M Airmar's Mix & Match Chirp Cable for Humminbird. Features: Length: 1M 9-Pin This product may not be returned to the original point of purchase. Please con... More Details
Airmar Humminbird 14-Pin Mix & Match Chirp Cable - 1M
Transducer Accessories, Airmar
$184.95
You save:
$20.54
Humminbird 14-Pin Mix & Match Chirp Cable - 1M Airmar's 14-Pin Mix & Match Chirp Cable for Humminbird Features: Length: 1M 14-Pin Specifically for Humminbird This product may not be returned to the or... More Details
Airmar Garmin 8-Pin Mix & Match Chirp Cable - 1M
Transducer Accessories, Airmar
$184.95
You save:
$20.54
Garmin 8-Pin Mix & Match Chirp Cable - 1M Airmar's 8-Pin Mix & Match Chirp Cable specifically for Garmin. Features: 8-Pin Length: 1M Chirp Cable This product may not be returned to the original point ... More Details
Airmar Garmin 8-Pin Mix & Match Cable f/Low-Frequency CHIRP 1kW Transducers
Transducer Accessories, Airmar
$184.95
You save:
$20.54
Garmin 8-Pin Mix & Match Cable for Low-Frequency CHIRP 1kW Transducers Airmar's 8-Pin Mix & Match Chirp Cable specifically for Garmin. Features: 8-Pin Low-Frequency CHIRP Cable This product may not ... More Details
Airmar Garmin 12-Pin Mix & Match Cable f/Chirp Transducers
Transducer Accessories, Airmar
$184.95
You save:
$20.54
Garmin 12-Pin Mix & Match Cable for Chirp Transducers Airmar's Garmin Mix & Match Cable Features: 12-Pin Specifically for Chirp Transducers This product may not be returned to the original point of pu... More Details
Furuno 33' 10-Pin to 10-Pin Extension Cable Features: Transducer Extension Cable 10-Pin(M) to 10-Pin(F) 33' This product may not be returned to the original point of purchase. Please contact the manu... More Details
Airmar Furuno 12-Pin Mix & Match Cable f/CHIRP Dual Element Transducers
Transducer Accessories, Airmar
$184.95
You save:
$20.54
Furuno 12-Pin Mix & Match Cable for CHIRP Dual Element Transducers For use with Airmar's Mix and Match CHIRP transducers up to 1kW (1,000 watts). This product may not be returned to the original point... More Details
Airmar Furuno 10-Pin Mix & Match Cable f/Low Frequency CHIRP Transducers
Transducer Accessories, Airmar
$184.95
You save:
$20.54
Furuno 10-Pin Mix & Match Cable for Low Frequency CHIRP Transducers Features: 10-Pin For Low Frequency CHIRP Transducers This product may not be returned to the original point of purchase. Please cont... More Details
Airmar Furuno 10-Pin Mix & Match Cable f/High or Medium Frequency CHIRP Transducers
Transducer Accessories, Airmar
$184.95
You save:
$20.54
Furuno 10-Pin Mix & Match Cable for High or Medium Frequency CHIRP Transducers Features: 10-Pin For High or Medium Frequency CHIRP Transducers This product may not be returned to the original point of... More Details
Airmar Furuno 10-Pin Mix & Match Cable f/600W Non-CHIRP Transducers
Transducer Accessories, Airmar
$133.58
You save:
$17.12
Furuno 10-Pin Mix & Match Cable for 600W Non-CHIRP Transducers Mix and Match 600W transducers are made as a common base transducer with a short (2m) cable attached, plus an interchangeable longer (8m)... More Details
Fairing Block for B744V Fairings orient the sound beam straight down by mounting the transducer parallel to the water surface. Features: Fairing: High-Performance Dimensions: 13.6” x 3” x 3” This prod... More Details
Fairing Block for B122 & DST-800L A replacement high-speed fairing block for the B122. This fairing can also be used for the DST800L. Dimensions: 13.5" L x 2.94" W x 2.96" T. This product may not be r... More Details
Deadrise Angle Finder - Accuracy of ± 1/2° Accurate to 1/2 of 1°, this precision instrument, with strong ceramic magnet is designed for attachment to a carpenter's square or straight edge to overcome ... More Details
Airmar Chirp Junction Box f/Raymarine CP470 Type Connector
Transducer Accessories, Airmar
$694.38
You save:
$72.81
Chirp Junction Box for Raymarine CP470 Type Connector Airmar adapter box for single-band or dual-band CHIRP tranducers, with Raymarine 11-pin connector. This product may not be returned to the origina... More Details
B45 Standard Low-Speed Fairing Block Airmar's Standard Low-Speed Fairing Block for B45. Specifications: Dimensions: 4.25” x 2.37” x 1.87” This product may not be returned to the original point of pur... More Details
Airmar B258 / SS258 High Speed Fairing Block
Transducer Accessories, Airmar
$238.93
You save:
$35.06
B258, SS258 High Speed Fairing Block Airmar High Speed Fairing block for B258, SS258 Style TransducerThis product may not be returned to the original point of purchase. Please contact the manufacturer... More Details
75WR-4 Transducer Housing Wrench A single-handed wrench that holds the main thru-hull housing via the 'wrench flats' on the side of the housing to facilitate tightening of the hull nut. Use wrench 75W... More Details
75WR-3 Double Handle Transducer Wrench Transducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. W... More Details
75WR-2 Transducer Hull Nut Wrench A single-handed wrench to tighten the hull nut on bronze and stainless steel housings. You can use wrench 75WR-4 to brace the housing when using this wrench. For use ... More Details
75WR-1 Crows Foot Transducer Wrench Transducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wren... More Details
60WR-4 Transducer Housing Wrench A single-handed wrench that holds the main thru-hull housing via the 'wrench flats' on the side of the housing to facilitate tightening of the hull nut. Use wrench 60W... More Details
60WR-3 Double Handle Transducer Wrench Transducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. W... More Details
60WR-2 Transducer Hull Nut Wrench A single-handed wrench to tighten the hull nut on 2" bronze and stainless steel housings. You can use wrench 60WR-4 to brace the housing when using this wrench. For u... More Details
60WR-1 Crows Foot Transducer Wrench Transducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wren... More Details
175WR-4 Transducer Housing Wrench A single-handed wrench that holds the main thru-hull housing via the 'wrench flats' on the top of the housing to facilitate tightening of the hull nut. Use wrench 164... More Details
164WR-3 Double Handle Transducer Wrench Transducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. ... More Details
164WR-2 Transducer Hull Nut Wrench A single-handed wrench to tighten the hull nut on B164, SS164 and SS264 housings. You can use wrench 164WR-4 to brace the housing when using this wrench. For use wit... More Details
164WR-1 Crows Foot Transducer Wrench Transducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wre... More Details
117WR-4 Transducer Housing Wrench A single-handed wrench that holds the main thru-hull housing via the 'wrench flats' on the side of the housing to facilitate tightening of the hull nut. For 2" bronze... More Details
117WR-3 Double Handle Transducer Wrench Transducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. ... More Details
117WR-2 Transducer Hull Nut Wrench A single-handed wrench to tighten the hull nut on 2" bronze and stainless steel housings. You can use wrench 117WR-4 to brace the housing when using this wrench. For... More Details
117WR-1 Crows Foot Transducer Wrench Transducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wre... More Details
Airmar 11-Pin Low-Frequency Mix & Match Cable f/Raymarine
Transducer Accessories, Airmar
$184.95
You save:
$20.54
11-Pin Low-Frequency Mix & Match Cable for Raymarine Some CHIRP transducers are now made as Mix and Match models. These versions have a common base transducer with an attached 9-meter cable, plus an i... More Details
10-Conductor In-Line Cable Splice - IP67 Airmar CHIRP transducers are made with cables ending in a bare wire connection. Some sounders have internal terminal blocks to which these bare wires can be co... More Details
