Select Category
Marine Navigation & Instruments
Autopilot Check Valve Kit This check valve kit is used with the 1.2L and 2.0L autopilot pumps to isolate them from the steering system when the autopilot is not active. Check valves to prevent slow pr... More Details
B117 Bronze Thru-Hull Depth/Temp - 8-Pin This bronze thru-hull mount transducer performs well at high speeds. An excellent choice for fiberglass and wood hulls, this 8-pin 600 W narrow stem transducer... More Details
Airmar B150M w/0° Tilt 300W Flush-mounted bronze housing,tilted element inside the transducer accommodates all hull deadrises and eliminates the need for a fairing block. Low, medium, and high frequen... More Details
Airmar B150M w/12° Tilt 300W Flush-mounted bronze housing,tilted element inside the transducer accommodates all hull deadrises and eliminates the need for a fairing block. Low, medium, and high freque... More Details
Airmar B150M w/20° Tilt 300W Flush-mounted bronze housing,tilted element inside the transducer accommodates all hull deadrises and eliminates the need for a fairing block. Low, medium, and high freque... More Details
B164 1kW Tilted Element 12° - 8-Pin Garmin's bronze, thru-hull mount transducer with 12° tilt provides depth and temperature data. Garmin's transducer has an operating frequency of 50 or 200 kHz and m... More Details
B164 1kW Tilted Element 20° - 8-Pin Garmin's bronze, thru-hull mount transducer with 20° tilt provides depth and temperature data. Garmin's transducer has an operating frequency of 50 or 200 kHz and m... More Details
Airmar B175H w/0° Tilt 1kW Flush-mounted bronze housing protrudes less than 1/4" outside hull and can sit on trailer rollers/bunks without damage. Tilted element inside the transducer accommodates all... More Details
Airmar B175H w/20° Tilt 1kW Flush-mounted bronze housing protrudes less than 1/4" outside hull and can sit on trailer rollers/bunks without damage. Tilted element inside the transducer accommodates al... More Details
Airmar B175L w/0° Tilt 1kW Flush-mounted bronze housing protrudes less than 1/4" outside hull and can sit on trailer rollers/bunks without damage. Tilted element inside the transducer accommodates all... More Details
Airmar B175L w/12° Tilt 1kW Flush-mounted bronze housing protrudes less than 1/4" outside hull and can sit on trailer rollers/bunks without damage. Tilted element inside the transducer accommodates al... More Details
Airmar B175L w/20° Tilt 1kW Flush-mounted bronze housing protrudes less than 1/4" outside hull and can sit on trailer rollers/bunks without damage. Tilted element inside the transducer accommodates al... More Details
Airmar B175M w/0° Tilt 1kW Flush-mounted bronze housing protrudes less than 1/4" outside hull and can sit on trailer rollers/bunks without damage. Tilted element inside the transducer accommodates all... More Details
B258 1kW Bronze Thru-Hull Depth/Temp w/FB - 8-Pin Garmin's bronze, thru-hull mount transducer with fairing provides depth and temperature data. This transducer has an operating frequency of 50 or 200 ... More Details
B258 1kW Bronze Thru-Hull Depth/Temp with FB - 8-Pin Garmin's bronze, thru-hull mount transducer with fairing provides depth and temperature data. Garmin's transducer has an operating frequency of 50 ... More Details
Garmin B265LH Bronze Thru-Hull Mount Transducer w/Depth & Temp - 12-Pin
Transducers, Garmin
$2,835.89
B265LH Bronze Thru-Hull Mount Transducer w/Depth & Temp - 12-Pin Garmin's best performing 1 kW thru-hull transducer, this mount performs well in deep water and has exceptional bottom and water column ... More Details
B265LM Bronze Thru-Hull Mount Transducer with Depth & Temperature Garmin's best performing 1 kW thru-hull transducer, this bare wire mount performs well in deep water and has exceptional bottom and wa... More Details
B275LH-W Bronze Thru-Hull Transducer - 12-Pin Get more coverage under your boat with Airmar’s unique wide beam, high frequency Chirp-ready transducers. The high band operates across a frequency range ... More Details
B60 600W Tilted Element 12° - 8-Pin This entry-level tilted bronze transducer accommodates deadrise angles of 8 to 15 degrees without a fairing. An excellent choice for fiberglass and wood hulls, this... More Details
Tilted Element™ Thru-Hull Minimize Your Drag The B619 model have been the standard in low-profile models for many years. Their large sensitive ceramics allow deep echosounding up to 206M (700'). ... More Details
B619 20° Tilt Bronze Thru-Hull Transducer - 8-Pin Minimize Your Drag The B619 model have been the standard in low-profile models for many years. Their large sensitive ceramics allow deep echosounding ... More Details
B744V 600W Triducer 50/200kHz - 8-Pin Garmin's bronze, thru-hull mount transducer with fairing provides depth, temperature and speed data. Garmin's transducer has an operating frequency of 50 or 200 k... More Details
Airmar B744VL 200/50kHz Bronze Long Stem Thru-hull Transducer (8-pin) 010-10193-22 Our bronze, thru-hull mount long stem transducer provides depth, speed and temperature data. This transducer has an o... More Details
Airmar B75H w/12° Tilt 600W Flush-mounted bronze housing,tilted element inside the transducer accommodates all hull deadrises and eliminates the need for a fairing block. Low, medium, and high frequen... More Details
Airmar B75H w/20° Tilt 600W Flush-mounted bronze housing,tilted element inside the transducer accommodates all hull deadrises and eliminates the need for a fairing block. Low, medium, and high frequen... More Details
Airmar B75M w/0° Tilt 600W Flush-mounted bronze housing,tilted element inside the transducer accommodates all hull deadrises and eliminates the need for a fairing block. This broadband transducer is d... More Details
Airmar B75M w/12° Tilt 600W Flush-mounted bronze housing,tilted element inside the transducer accommodates all hull deadrises and eliminates the need for a fairing block. This broadband transducer is ... More Details
Airmar B75M w/20° Tilt 600W Flush-mounted bronze housing,tilted element inside the transducer accommodates all hull deadrises and eliminates the need for a fairing block. This broadband transducer is ... More Details
Bail Mount for GPSMAP® 15x3 Series Surface mount your compatible GPSMAP device using our bail mount. The mount tilts the device for optimum viewing. More Details
Bail Mount with Knobs Use our replacement bail mount with knobs to surface mount your GPSMAP® device. Compatible Devices: GPSMAP® 720 GPSMAP® 720s GPSMAP® 740 GPSMAP® 740sWARNING: This product can exp... More Details
Bail Mount with Knobs for 8x10-9x10 Surface mount your GPSMAP using our bail mount with knobs. The mount tilts for optimum viewing. WARNING: This product can expose you to chemicals which are known to... More Details
Bail Mount with Knobs for 8x12 Series Surface mount your GPSMAP using our bail mount with knobs. The mount tilts for optimum viewing. WARNING: This product can expose you to chemicals which are known ... More Details
Bail Mount with Knobs for echoMAP™ 70dv/70s & GPSMAP® 741/xs Surface mount your echoMAP™ or GPSMAP® using our bail mount with knobs. The mount tilts for optimum viewing. WARNING: This product can expo... More Details
Bail Mount with Knobs for echoMAP™ Series Surface mount your echoMAP™ using our bail mount with knobs; the mount tilts for optimum viewing. With the mount's quick cable disconnect feature, you can plu... More Details
Bail Mount with Knobs for ECHOMAP™ Ultra 2 16" Chartplotters Surface mount your compatible ECHOMAP Ultra 2 chartplotter by using our bail mount with knobs; the mount tilts for optimum viewing. The 10-... More Details
Bail Mount with Knobs for GPSMAP 7x16 Surface mount your GPSMAP using our bail mount with knobs. The mount tilts for optimum viewing.WARNING: This product can expose you to chemicals which are known t... More Details
Bail Mount with Knobs for GPSMAP® 10x2 Series Surface mount your compatible GPSMAP using our bail mount with knobs. The mount tilts for optimum viewing. More Details
Bail Mount with Knobs for GPSMAP® 12x2 Series Surface mount your compatible GPSMAP using our bail mount with knobs. The mount tilts for optimum viewing. More Details
Bail Mount with Knobs f/GPSMAP® 7x07 Surface mount your GPSMAP using our bail mount with knobs. The mount tilts for optimum viewing. WARNING: This product can expose you to chemicals which are known t... More Details
Bail Mount w/Knobs f/GPSMAP® 7x2 Series Surface mount your compatible GPSMAP using our bail mount with knobs. The mount tilts for optimum viewing. WARNING: This product can expose you to chemicals whi... More Details
Bail Mount with Knobs for GPSMAP® 7x3 Series Surface mount your compatible GPSMAP device using our bail mount with knobs. The mount tilts for optimum viewing. More Details
Bail Mount with Knobs for GPSMAP® 8x16 Series Surface mount your GPSMAP® using our bail mount with knobs. The mount tilts for optimum viewing. Compatible Devices: GPSMAP® 8416 GPSMAP® 8416xsv GPSMAP® ... More Details
Bail Mount with Knobs for GPSMAP® 9x13 Series Surface mount your compatible GPSMAP chartplotter using our bail mount. The mount tilts for optimum viewing. More Details
Bail Mount with Knobs for GPSMAP® 9x2 Series Surface mount your compatible GPSMAP using our bail mount with knobs. The mount tilts for optimum viewing. WARNING: This product can expose you to chemical... More Details
Bail Mount w/Quick Release Cradle f/ECHOMAP Ultra 10" Surface mount your compatible ECHOMAP™ Ultra chartplotter/sounder combo using our bail mount with knobs; the mount tilts for optimum viewing. Plu... More Details
Bail Mount w/Quick Release Cradle f/ECHOMAP Ultra 12" Surface mount your compatible ECHOMAP™ Ultra chartplotter/sounder combo using our bail mount with knobs; the mount tilts for optimum viewing. Plu... More Details
Bail Mount with Quick Release Cradle for ECHOMAP™ UHD2 6sv Surface mount your compatible ECHOMAP™ UHD2 chartplotter by using the bail mount with knobs; the mount tilts for optimum viewing. Plugging th... More Details
Bail Mount with Quick Release Cradle for ECHOMAP™ UHD2 7sv Surface mount your compatible ECHOMAP™ UHD2 chartplotter by using the bail mount with knobs; the mount tilts for optimum viewing. Plugging th... More Details
Bail Mount with Quick Release Cradle for ECHOMAP™ UHD2 9sv Surface mount your compatible ECHOMAP™ UHD2 chartplotter by using the bail mount with knobs; the mount tilts for optimum viewing. Plugging th... More Details
Garmin Bail Mount w/Quick Release Cradle f/ECHOMAP™ Ultra 2 10" Chartplotter
Accessories, Garmin
$342.49
Bail Mount with Quick Release Cradle for ECHOMAP™ Ultra 2 10" Chartplotter Surface mount the compatible ECHOMAP Ultra 2 chartplotter by using Garmin's bail mount with knobs; the mount tilts for optimu... More Details
Garmin Bail Mount w/Quick Release Cradle f/ECHOMAP™ Ultra 2 12" Chartplotter
Accessories, Garmin
$342.49
Bail Mount with Quick Release Cradle for ECHOMAP™ Ultra 2 12" Chartplotter Surface mount the compatible ECHOMAP Ultra 2 chartplotter by using Garmin's bail mount with knobs; the mount tilts for optimu... More Details
Bail Mount with Knobs for GPSMAP® 12x3 Series Surface mount your compatible GPSMAP device using our bail mount with knobs. The mount tilts for optimum viewing. More Details
Bail Mount with Knobs for GPSMAP® 9x3 Series Surface mount your compatible GPSMAP device using our bail mount with knobs. The mount tilts for optimum viewing. More Details
Bailmount with Knobs for GPSMAP® 800 Series Surface mount your GPSMAP® using our bail mount with knobs. The mount swivels and tilts for optimum viewing. WARNING: This product can expose you to chemica... More Details
Garmin Bare Wire Transducer to 12-Pin Sounder Wire Block Adapter
Transducer Accessories, Garmin
$116.44
Bare Wire Transducer to 12-Pin Sounder Wire Block Adapter Connect a compatible bare wire transducer to a Garmin 12-pin sounder connector with this wire block adapter. Compatible Devices: GPSMAP® 7607x... More Details
Barrel Mount for Panoptix™ PS21 Replacement trolling motor barrel mount for the Panoptix PS21 LiveVü Forward transducer. Compatible Devices: Panoptix™ PS21 WARNING: This product can expose you to chem... More Details
BlueNet™ 20 Switch Increase the number of available network ports in a Garmin BlueNet™ network. Once you’ve used all the ports on your compatible chartplotter just add a Garmin BlueNet 20 switch to th... More Details
BlueNet™ 30 Gateway The Garmin BlueNet 30 gateway is required for Garmin BlueNet™ network compatible devices to network with legacy Garmin marine devices. Through this gateway, you can connect a Garm... More Details
BlueNet™ Marine Network Cable - 50' The Garmin BlueNet™ marine network cables offer additional cable lengths to help with installations. Additional sizes are sold separately. Accessories SKU 101312 — ... More Details
BlueNet™ Network Cable - 1' This short Garmin BlueNet™ network cable is used to connect a Garmin BlueNet™ 20 switch or Garmin BlueNet™ 30 gateway to each other, or other Garmin BlueNet network product... More Details
BlueNet™ Network Cable - 20' The Garmin BlueNet marine network cables offer additional cable lengths to help with installations. Additional sizes are sold separately. More Details
BlueNet™ Network Cable - 40' Our Garmin BlueNet marine network cables offer additional cable lengths to help with installations WARNING: This product can expose you to chemicals which are known to the... More Details
BlueNet™ Network Cable - 500' The Garmin BlueNet™ network cables offer various lengths to help with installations. Various sizes are sold separately. Consider purchasing the Field installable Adapter ... More Details
BlueNet™ Network Cable - 6' The Garmin BlueNet marine network cables offer additional cable lengths to help with installations. Additional sizes are sold separately. More Details
BlueNet™ Network Cable 50' (Right Angle) Our Garmin BlueNet marine network cables offer additional cable lengths to help with installations. WARNING: This product can expose you to chemicals which are... More Details
BlueNet™ Network Cable 8" (Right Angle) The Garmin BlueNet marine network cables offer additional cable lengths to help with installations. Additional sizes sold separately. More Details
BlueNet™ Network Cable Coupler Attach two Garmin BlueNet™ Network cables with this small and robust coupler. WARNING: This product can expose you to chemicals which are known to the State of Californi... More Details
BlueNet™ Network to RJ45 Adapter Cable Use this adapter cable to connect your compatible third-party, OneHelm™ digital switching and Fusion® equipment, with an RJ45 port, to the Garmin BlueNet network... More Details
Garmin Bronze Thru-hull Wide Beam Transducer w/Depth & Temp - 0° Tilt, 8-Pin - Airmar B175HW
Transducers, Garmin
$2,397.49
Bronze Thru-hull Wide Beam Transducer w/Depth & Temp - 0° Tilt, 8-Pin - Airmar B175HW Step up to 1 kW without a fairing with this flush-mounted bronze housing that protrudes less than 1/4-inch outside... More Details
Garmin Bronze Thru-hull Wide Beam Transducer w/Depth & Temp - 12° tilt, 8-pin - Airmar B175HW
Transducers, Garmin
$2,397.49
Bronze Thru-hull Wide Beam Transducer w/Depth & Temp - 12° Tilt, 8-Pin - Airmar B175HW Step up to 1 kW without a fairing with this flush-mounted bronze housing that protrudes less than 1/4-inch outsid... More Details
Garmin Bronze Thru-hull Wide Beam Transducer w/Depth & Temp - 20° tilt, 8-pin - Airmar B175HW
Transducers, Garmin
$2,397.49
Bronze Thru-hull Wide Beam Transducer w/Depth & Temp - 20° Tilt, 8-Pin - Airmar B175HW Step up to 1 kW without a fairing with this flush-mounted bronze housing that protrudes less than 1/4-inch outsid... More Details
Cable Grommet Use Garmin's cable grommets to cover installation holes that have been drilled into your boat. Compatible Devices: GDL 30/30A GMR™ Series GPSMAP® Series GSD™ Series WARNING: This product... More Details
Camera Coax Cable - 15M Add additional length for installations with this 15M camera coax cable. More Details
Camera Coax Cable - 25M Add additional length for installations with this 25M camera coax cable. More Details
Camera Coax Cable - 8M Add additional length for installations with this 8M camera coax cable. More Details
Carabiner Clip for MOB Tag - Black Attach your MOB tag in a convenient way with this carabiner with quick-release attachment, or slip it in your pocket with the floating keychain. What's In The Box? C... More Details
Carbon Fiber Mast Bracket - 2 Units Mount 2 GNX™ 120 instrument displays to the mast with this carbon fiber bracket. It offers a sleek, compelling industrial design, providing a “glass mast” look. WAR... More Details
Carbon Fiber Mast Bracket - 3 Units Mount 3 GNX™ 120 instrument displays to the mast with this carbon fiber bracket. It offers a sleek, compelling industrial design, providing a “glass mast” look. WAR... More Details
Carbon Fiber Mast Bracket - 4 Units Mount 4 GNX™ 120 instrument displays to the mast with this carbon fiber bracket. It offers a sleek, compelling industrial design, providing a “glass mast” look. WAR... More Details
CCU Extension Cable 15M Mount your CCU farther than 3 m (9.8') away from the ECU with a 5m (16.4'), 15m (49.2'), or 25m (82.0') extension cable.WARNING: This product can expose you to chemicals which ... More Details
CCU Extension Cable 5M Mount your CCU farther than 3 m (9.8') away from the ECU with a 5 m (16.4'), 15m (49.2'), or 25m (82.0') extension cable. WARNING: This product can expose you to chemicals which... More Details
Charger for Lead Acid Batteries Stay charged wherever you go with our North America AC charger. Simply plug the adapter into a wall outlet and connect the other end to the power cable included with t... More Details
Class A Drive Unit For sailboats with up to 28,500 lbs of displacementWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or oth... More Details
Class B Drive Unit For sailboats with up to 79,000 lbs. of displacement. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or ... More Details
Course Computer Unit - Reactor™ 40 Garmin's CCU is the brain of the Reactor 40 autopilot system, containing sensory equipment used to determine heading and rate of turn. Connect the CCU to the NMEA 20... More Details
Course Computer Unit (CCU) - Reactor™ 40 Steer-by-wire Garmin's CCU is the brain of the Reactor 40 autopilot system, containing sensory equipment used to determine heading and rate of turn. Connect th... More Details
Dual Beam-IF Ice Transducer Get crystal-clear images of fish from your spot on the ice with the Dual Beam IF ice fishing transducer1. It offers remarkable target separation, an operating frequency of ... More Details
ECHOMAP™ Plus 7Xsv Boat Kit Take your 7” ECHOMAP Plus sv combo from the ice to your boat with the easy to install kit. Includes GT52HW-TM transducer with high wide CHIRP traditional, ClearVü and SideV... More Details
ECHOMAP™ Ultra 2 Protective Cover - 16" Use our cover to protect your compatible ECHOMAP™ Ultra 2 from the harsh marine environment when not in use. More Details
ECU 10 - Reactor™ 40 One of the main components for your Reactor 40 Hydraulic autopilot system, the ECU connects and powers the course computer unit (CCU) and the hydraulic pump, controlling the pump ... More Details
ECU Power Cable Provide power to your electronic control unit (ECU) with our ECU power cable. Simply wire the ECU power cable to your boat battery as one of the last connections made during GHP 10 ins... More Details
Electronic Control Unit (ECU) Garmin's Electronics Control Unit (ECU) is made specifically for the GHP™ 12 Autopilot System. Compatible Devices: GHP™ 12 Autopilot System GHP Reactor™ Mechanical/Retrof... More Details
Electronic Control Unit (ECU) for GHP Compact Reactor™ One of the 5 main components of your GHP Compact Reactor autopilot system, the ECU connects and powers the course computer unit (CCU) and the hyd... More Details
Garmin Electronic Control Unit (ECU) Power Cable, Threaded Collar f/GHP™ 12 & GHP™ 20
Autopilots, Garmin
$123.29
Electronics Control Unit (ECU) Power Cable, Threaded Collar - 2.5m Provide power to your electronic control unit (ECU) with Garmin's electronic control unit (ECU) power cable. Simply wire the electron... More Details
Extension Cable for 12-Pin Garmin Scanning Transducers Extend the cable length of your compatible 12-pin transducer with these 4.3 ft, 10 ft, or 30 ft cables. Supports 12-pin Airmar transducers with X... More Details
Extension Cable with XID - 12-Pin - 10' Extend the cable length of your compatible 12-pin transducer with this 10 foot (3 meter) cable. Supports 12-pin Airmar transducers with XID.WARNING: This produc... More Details
Extension Cable with XID - 12-Pin - 30' Extend the cable length of your compatible 12-pin transducer with this 30 foot (9 meter) cable. Supports 12-pin Airmar transducer with XID.WARNING: This product... More Details
External Antenna for GOS 10 Hub Use this external antenna for Garmin's GOS 10 Hub. What's In The Box? External antenna for wireless connection to MOB tags More Details
External GPS/Iridium Antenna with Adapter Cable Use our external passive antenna/extension cable when you want to install an external GPS/Iridium antenna. Can be used on the exteriors of vehicles or b... More Details
Airmar T80 Water Temperature Probe (8-pin) Find out the water surface temperature by attaching our 8-pin stainless steel temperature probe to your transducer.WARNING: This product can expose you to ch... More Details
