Select Category
Marine Navigation & Instruments
Plastic Transom Mount Transducer w/ Temp, 600w (10-Pin) 600 Watts 50/200 kHz 40/10 degree Beam Angles Plastic Transom Mount with Temperature 30 Foot Cable with 10-Pin Connector WARNING: This product c... More Details
The AIR-033-352 is a high performance fairing block for transducers utilizing the Airmar B-45 housing. WARNING: This product can expose you to chemicals which are known to the State of California to c... More Details
Actisense 0183 to N2K Gateway w/PC Interface, ISO Connection
NMEA Cables & Sensors, Actisense
$393.94
0183 to N2K Gateway with PC Interface, ISO Connection Intelligent Gateway technology enables PC interfacing and NMEA data conversion… The NGX-1 is an intelligent multi-function gateway, combining the ... More Details
Actisense 0183 to N2K Gateway w/PC Interface, USB Connection
NMEA Cables & Sensors, Actisense
$420.82
0183 to N2K Gateway with PC Interface, USB Connection Intelligent Gateway technology enables PC interfacing and NMEA data conversion… The NGX-1 is an intelligent multi-function gateway, combining the ... More Details
9-Pin, D-Type Molded Cable Assembly - Female 9-pin, D-type molded cable assembly. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any ... More Details
Actisense A2K-TDC-0M25 NMEA2000 Micro Cable Assembly - 0.25M
NMEA Cables & Sensors, Actisense
$38.36
A2K-TDC-0M25 NMEA2000 Micro Cable Assembly - 0.25M Available in various lengths, the cable assemblies can be used as either a drop cable from a NMEA 2000 backbone or to extend the length of the backbo... More Details
A2K-TDC-0M5 NMEA2000 Micro Cable Assembly - 0.5M Available in various lengths, the cable assemblies can be used as either a drop cable from a NMEA 2000 backbone or to extend the length of the backbone... More Details
A2K-TDC-10M NMEA2000 Micro Cable Assembly - 10M Available in various lengths, the cable assemblies can be used as either drop cable from a NMEA 2000 backbone or to extend the length of the backbone ca... More Details
A2K-TDC-1M NMEA2000 Micro Cable Assembly - 1M Available in various lengths, the cable assemblies can be used as either drop cable from a NMEA 2000 backbone or to extend the length of the backbone cabl... More Details
A2K-TDC-2M NMEA2000 Micro Cable Assembly - 2M Available in various lengths, the cable assemblies can be used as either a drop cable from a NMEA 2000 backbone or to extend the length of the backbone ca... More Details
A2K-TDC-3M NMEA2000 Micro Cable Assembly - 3M Available in various lengths, the cable assemblies can be used as either a drop cable from a NMEA 2000 backbone or to extend the length of the backbone ca... More Details
A2K-TDC-4M NMEA2000 Micro Cable Assembly - 4M Available in various lengths, the cable assemblies can be used as either a drop cable from a NMEA 2000 backbone or to extend the length of the backbone ca... More Details
A2K-TDC-5M NMEA2000 Micro Cable Assembly - 5M Available in various lengths, the cable assemblies can be used as either a drop cable from a NMEA 2000 backbone or to extend the length of the backbone ca... More Details
A2K-TDC-6M NMEA2000 Micro Cable Assembly - 6M Available in various lengths, the cable assemblies can be used as either drop cable from a NMEA 2000 backbone or to extend the length of the backbone cabl... More Details
Actisense DIN Rail Mounting Kit f/NDC-5, EMU-1-BAS & NBF-3-BAS on Top Hat or G Section Rails
Accessories, Actisense
$28.61
DIN Rail Mounting Kit for NDC-5, EMU-1-BAS & NBF-3-BAS on Top Hat or G Section Rails The kit is suitable for use with a top-hat-rail, type EN 50 022, or a G section, type EN 50 035. This product may n... More Details
Actisense DIN Rail Mounting Kit f/Use w/USG-2 on Top Hat or G Section Rails - 1 Clip, 2 Screws
Accessories, Actisense
$24.14
DIN Rail Mounting Kit f/Use w/USG-2 on Top Hat or G Section Rails - 1 Clip, 2 Screws For use with the USG-2 (Hydra case) The kit is suitable for use with a top-hat-rail, type EN 50 022 or a G section,... More Details
N2K Micro 4 Way T-Piece The 4 Way T-Piece from Actisense saves you time, space and money on your NMEA 2000® installation. The Actisense 4 Way T-Piece is for use where multiple drops or ‘ports’ are req... More Details
Actisense N2K Micro Gender Changer - Female to Female - .25M
NMEA Cables & Sensors, Actisense
$61.65
N2K Micro Gender Changer - Female to Female - .25M Use between two cable connectors of the same type and gender of connector on an NMEA 2000® backbone. Manufactured using Actisense designed connectors... More Details
N2K Micro Gender Changer - Male to Male - .25M Use between two cable connectors of the same type and gender of connector on an NMEA 2000® backbone. Manufactured using Actisense designed connectors wit... More Details
Actisense NMEA 0183 PC OPTO-Isolator Cable, RS232 DB9 Female, Shielded (Isolated to PC)
NMEA Cables & Sensors, Actisense
$176.10
NMEA 0183 PC OPTO-Isolator Cable, RS232 DB9 Female, Shielded (Isolated to PC) Add isolation to an RS232 port to protect against ground loops. The OPTO-4 provides a safe and low cost way of connecting ... More Details
Actisense NMEA 0183 to NMEA2000 Gateway w/WiFi & PC Interface - ISO Connection
NMEA Cables & Sensors, Actisense
$550.06
NMEA 0183 to NMEA2000 Gateway with WiFi and PC Interface - ISO Connection The WGX-1 is an intelligent NMEA 0183 and NMEA 2000 WiFi Gateway with bi-directional conversion capability. Transfer data from... More Details
Actisense NMEA 2000 Engine Monitoring Unit - Analog to NMEA2000 Engine Gateway
NMEA Cables & Sensors, Actisense
$935.64
NMEA 2000 Engine Monitoring Unit - Analog to NMEA2000 Engine Gateway Share engine information on the NMEA 2000 bus. The Actisense EMU-1 is a specialized analogue to NMEA 2000 Gateway which converts da... More Details
NMEA2000 Micro 4-Way Drop Reduce your NMEA 2000 cabling requirements, saving time, space and money. The Actisense 4-way drop makes it easier to reach up to four devices with a single cable. Typically,... More Details
NMEA2000 Micro Bulk Cable Reel - 100M Create or extend an NMEA 2000 backbone of flexible lengths to suit any installation. The Actisense NMEA 2000 Bulk Lite cable is available in 100-meter reels and i... More Details
Actisense NMEA2000 Micro Starter Kit w/MPT-2, TER-M (x2), T-MFF (x2) & TDC-2M
NMEA Cables & Sensors, Actisense
$246.60
NMEA2000 Micro Starter Kit with MPT-2, TER-M (x2), T-MFF (x2) & TDC-2M The NMEA 2000 Starter Kit from Actisense provides everything that is required to start an NMEA 2000 installation. The Actisense r... More Details
Actisense NMEA2000 Micro Starter Kit w/MPT-2, TER-M (x2), T-MFF (x2) & TDC-6M
NMEA Cables & Sensors, Actisense
$274.00
NMEA2000 Micro Starter Kit with MPT-2, TER-M (x2), T-MFF (x2) & TDC-6M The NMEA 2000 Starter Kit 2a from Actisense provides everything that is required to start an NMEA 2000 installation. The Actisens... More Details
Actisense NMEA2000 Micro Starter Kit w/MPT-2, TER-U (x2), T-MFF (x2) & TDC-4M
NMEA Cables & Sensors, Actisense
$342.50
NMEA2000 Micro Starter Kit with MPT-2, TER-U (x2), T-MFF (x2) & TDC-4M The NMEA 2000 Micro Smart Starter Kit from Actisense provides everything that is required to start an NMEA 2000 installation. The... More Details
NMEA2000 Micro T Connector Quality-engineered connectors are shaped to allow easy and secure connections. Two female and one male connector allow easy connection to Actisense NMEA lite cable assemblie... More Details
Actisense NMEA2000 Micro T-Piece w/Female Connectors & 3M UL Certified Cable
NMEA Cables & Sensors, Actisense
$68.50
NMEA2000 Micro T-Piece with Female Connectors & 3M UL Certified Cable The A2K-MPT-2 is a simple, safe, and efficient method of powering an NMEA 2000 network. Now with improved strain relief! The Micro... More Details
NMEA2000 Micro Terminator - Female Actisense terminators are exceptionally robust, designed to withstand the harsh conditions of the marine environment, and are easy to install. Each NMEA 2000 install... More Details
NMEA2000 Micro Terminator - Male Actisense terminators are exceptionally robust, designed to withstand the harsh conditions of the marine environment, and are easy to install. Each NMEA 2000 installat... More Details
NMEA2000 Mid Bulk Cable Reel - 100M This cable can be used to create or extend an NMEA 2000® network of flexible lengths to suit any installation. The cable is ideal for use with any of the Actisense ... More Details
Actisense NMEA2000 Right Angle Micro Field Fit Connector - Female
NMEA Cables & Sensors, Actisense
$41.10
NMEA2000 Right Angle Micro Field Fit Connector - Female Field-fit connectors allow full customization of your NMEA 2000 network cabling. Male and female variants, as well as right-angle options for ea... More Details
Actisense NMEA2000 Right Angle Micro Field Fit Connector - Male
NMEA Cables & Sensors, Actisense
$41.10
NMEA2000 Right Angle Micro Field Fit Connector - Male Field-fit connectors allow full customization of your NMEA 2000 network cabling. Male and female variants, as well as right-angle options for each... More Details
NMEA2000 Smart Universal Micro Terminator Terminate your NMEA 2000 network – regardless of whether a male or female connection is required – and use the TER-U’s smart functionality to easily diagnose ... More Details
Actisense NMEA2000 Straight Micro Field Fit Connector - Female
NMEA Cables & Sensors, Actisense
$41.10
NMEA2000 Straight Micro Field Fit Connector - Female Field-fit connectors allow full customization of your NMEA 2000 network cabling. Male and female variants, as well as right-angle options for each,... More Details
Actisense NMEA2000 Straight Micro Field Fit Connector - Male
NMEA Cables & Sensors, Actisense
$41.10
NMEA2000 Straight Micro Field Fit Connector - Male Field-fit connectors allow full customization of your NMEA 2000 network cabling. Male and female variants, as well as right-angle options for each, p... More Details
NMEA2000 to WiFi Gateway The W2K-2 is a rugged and reliable NMEA 2000 to Wi-Fi Gateway with built-in data logger and Actisense-i diagnostic tools. Transfer data from an NMEA 2000 backbone to any devic... More Details
Actisense PRO NMEA 0183 Buffer - 2 OPTO Inputs, 12 ISO-Drive Outputs, Serial Port, Ethernet Port, Pluggable Screw Terminal
NMEA Cables & Sensors, Actisense
$1,340.31
PRO NMEA 0183 Buffer - 2 OPTO Inputs, 12 ISO-Drive Outputs, Serial Port, Ethernet Port, Pluggable Screw Terminal Two OPTO-isolated inputs and twelve ISO-Drive™ isolated outputs. Offering device protec... More Details
PRO NMEA 0183 Multiplexer Eight OPTO-isolated inputs and six ISO-Drive™isolated outputs. Offering device protection and excellent flexibility, all in one product. Introducing the Actisense® PRO-MUX-2,... More Details
Actisense PRO NMEA 0183 Multiplexer - 5 Inputs & 2 ISO-Drive Outputs, Ethernet & Serial Connections
NMEA Cables & Sensors, Actisense
$808.62
PRO NMEA 0183 Multiplexer - 5 Inputs & 2 ISO-Drive Outputs, Ethernet & Serial Connections The PRO-NDC-1E is more than just an NMEA 0183 Multiplexer… Rugged, Robust, type-approved multiplexer with powe... More Details
PRO NMEA 0183 Multiplexer/NMEA 2000 Gateway Interconnectivity, reimagined! The PRO-NDC-1E2K is much more than an NMEA 0183 Multiplexer… Rugged, Robust, Type Approved Multiplexer with built-in NMEA 200... More Details
Actisense PRO NMEA Buffer - 1 OPTO Input, 6 ISO-Drive Outputs, Serial Port, Pluggable Screw Terminals
NMEA Cables & Sensors, Actisense
$512.34
PRO NMEA Buffer - 1 OPTO Input, 6 ISO-Drive Outputs, Serial Port, Pluggable Screw Terminals Safely connect one Talker to six Listeners with full isolation. The Type-approved NMEA Buffer PRO-NBF-1 Buff... More Details
Protective Screw Cover for N2K Connectors - 10-Pack Screw-cap covers for NMEA 2000 Micro connectors. This product may not be returned to the original point of purchase. Please contact the manufacturer... More Details
Actisense Protective Screw Cover f/NMEA2000 Male Micro Connectors - 10-Pack
NMEA Cables & Sensors, Actisense
$34.80
Protective Screw Cover for NMEA2000 Male Micro Connectors - 10-Pack Screw-cap covers for NMEA 2000 Micro connectors. This product may not be returned to the original point of purchase. Please contact ... More Details
Actisense Rear Panel Mount NMEA2000 Wired Micro 5-Pin - Female
NMEA Cables & Sensors, Actisense
$31.98
Rear Panel Mount NMEA2000 Wired Micro 5-Pin - Female Panel-mount wired connectors available from Actisense allow NMEA 2000 installations through watertight bulkheads (or panels) to be achieved. Waterp... More Details
Actisense Rear Panel Mount NMEA2000 Wired Micro 5-Pin - Male
NMEA Cables & Sensors, Actisense
$32.14
Rear Panel Mount NMEA2000 Wired Micro 5-Pin - Male Panel mount wired connectors available from Actisense allow NMEA 2000 installations through watertight bulkheads (or panels) to be achieved. Waterpro... More Details
RJ45 Waterproof Ethernet Connector for NDC-5 RJ45 Field-Fit Ethernet connector. Allows for complete customization of Ethernet network cabling lengths, reducing cost, waste, and the overall weight of y... More Details
SeaTalkNG to NMEA2000 Adapter Cable Adapter cable to convert SeaTalkNG data to NMEA2000. This product may not be returned to the original point of purchase. Please contact the manufacturer directly wi... More Details
Actisense Self-Contained Boat Network - Complete Network f/8 Devices w/Internal Terminators & Power Feed
NMEA Cables & Sensors, Actisense
$213.61
Self-Contained Boat Network - Complete Network f/8 Devices w/Internal Terminators & Power Feed Installing small NMEA 2000® networks is quicker and easier than it’s ever been with the Self-contained Bo... More Details
Spare Shielded Cable for Connecting USB-2 to PC USB cable accessory for use with the Actisense USG-2. *Note: The USG-2 ships with this cable included in the box, but it is also available as an accesso... More Details
Actisense USB to Serial Adapter f/PRO Range & EMU-1 Products
NMEA Cables & Sensors, Actisense
$70.06
USB to Serial Adapter for PRO Range & EMU-1 Products Serial to USB cable assembly. *Note: this accessory is only suitable for use with Actisense PRO range products. To safely transfer NMEA 0183 data t... More Details
Actisense USG-2 Isolated USB To Serial Gateway For Use w/NMEA0183, RS422 and RS232
NMEA Cables & Sensors, Actisense
$241.19
USG-2 Isolated USB To Serial Gateway For Use w/NMEA0183, RS422 And RS232 The USG-2 ensures safety and reliability when connecting a PC to your NMEA 0183 network. The USG-2 converts a USB port into a b... More Details
B150M Bronze 0 Degree Thru-Hull 300W 8-Pin As CHIRP continues to redefine recreational fishing, AIRMAR has expanded its lineup of broadband transducers to satisfy the growing demand for this game-chan... More Details
10-Conductor In-Line Cable Splice - IP67 Airmar CHIRP transducers are made with cables ending in a bare wire connection. Some sounders have internal terminal blocks to which these bare wires can be co... More Details
Airmar 11-Pin Low-Frequency Mix & Match Cable f/Raymarine
Transducer Accessories, Airmar
$184.95
You save:
$20.54
11-Pin Low-Frequency Mix & Match Cable for Raymarine Some CHIRP transducers are now made as Mix and Match models. These versions have a common base transducer with an attached 9-meter cable, plus an i... More Details
117WR-1 Crows Foot Transducer Wrench Transducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wre... More Details
117WR-2 Transducer Hull Nut Wrench A single-handed wrench to tighten the hull nut on 2" bronze and stainless steel housings. You can use wrench 117WR-4 to brace the housing when using this wrench. For... More Details
117WR-3 Double Handle Transducer Wrench Transducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. ... More Details
117WR-4 Transducer Housing Wrench A single-handed wrench that holds the main thru-hull housing via the 'wrench flats' on the side of the housing to facilitate tightening of the hull nut. For 2" bronze... More Details
164WR-1 Crows Foot Transducer Wrench Transducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wre... More Details
164WR-2 Transducer Hull Nut Wrench A single-handed wrench to tighten the hull nut on B164, SS164 and SS264 housings. You can use wrench 164WR-4 to brace the housing when using this wrench. For use wit... More Details
164WR-3 Double Handle Transducer Wrench Transducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. ... More Details
175WR-4 Transducer Housing Wrench A single-handed wrench that holds the main thru-hull housing via the 'wrench flats' on the top of the housing to facilitate tightening of the hull nut. Use wrench 164... More Details
Airmar 200WX WeatherStation® Instrument - Land-based, Mobile, Standalone
Instruments, Airmar
$2,568.74
You save:
$267.15
200WX WeatherStation® Instrument - Land-based, Mobile, Standalone ** This unit requires the purchase of a cable, cable is not included with antenna ** The WeatherStation 200WX is the best choice for m... More Details
Airmar 599 Low/High Frequency - In-Hull Chirp Transducer w/o Connector
Transducers, Airmar
$8,577.56
You save:
$861.73
Low/High Frequency - In-Hull Chirp Transducer without Connector Rely on Airmar's new broadband transducers for your ultimate fishing mission. Whether you're a commercial fisherman, charter captain, or... More Details
60WR-1 Crows Foot Transducer Wrench Transducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wren... More Details
60WR-2 Transducer Hull Nut Wrench A single-handed wrench to tighten the hull nut on 2" bronze and stainless steel housings. You can use wrench 60WR-4 to brace the housing when using this wrench. For u... More Details
60WR-3 Double Handle Transducer Wrench Transducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. W... More Details
60WR-4 Transducer Housing Wrench A single-handed wrench that holds the main thru-hull housing via the 'wrench flats' on the side of the housing to facilitate tightening of the hull nut. Use wrench 60W... More Details
75WR-1 Crows Foot Transducer Wrench Transducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wren... More Details
75WR-2 Transducer Hull Nut Wrench A single-handed wrench to tighten the hull nut on bronze and stainless steel housings. You can use wrench 75WR-4 to brace the housing when using this wrench. For use ... More Details
75WR-3 Double Handle Transducer Wrench Transducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. W... More Details
75WR-4 Transducer Housing Wrench A single-handed wrench that holds the main thru-hull housing via the 'wrench flats' on the side of the housing to facilitate tightening of the hull nut. Use wrench 75W... More Details
B117 50/200kHz 600W Mix & Match 0° Deadrise Airmar’s entry-level B117 features a single, 50/200 kHz, dual-frequency, ceramic element in a low-profile bronze housing. The nearly-flush design minimizes ... More Details
Airmar B117 Bronze 0° Depth & Temp w/Ray Connector f/CP370 & DSM300
Transducers, Airmar
$438.39
You save:
$54.80
B117 Bronze 0° Depth & Temp with Ray Connector for CP370 & DSM300 The B117 features our 50/200 kHz, dual-frequency, single ceramic element in a low-profile housing. The nearly-flush design minimizes d... More Details
Airmar B117 Bronze Thru-Hull Transducer w/Humminbird #9 Plug - 7-Pin
Transducers, Airmar
$438.39
You save:
$54.80
B117 Bronze Thru-Hull Transducer w/Humminbird #9 Plug - 7-Pin The B117 features our 50/200 kHz, dual-frequency, single ceramic element in a low-profile housing. The nearly-flush design minimizes drag ... More Details
Airmar B117 Traditional/CW ThruHull 50/200kHz, 600W, Transducer, 9-Pin, DT f/Simrad, Lowrance & B&G
Transducers, Airmar
$438.39
You save:
$54.80
B117 Traditional/CW Thru-Hull 50/200kHz, 600W, Transducer, 9-Pin, DT for Simrad, Lowrance & B & G The B117 features a 50/200 kHz, dual-frequency, single, ceramic element in a low-profile bronze housin... More Details
Airmar B150 12 Degree Tilt Medium CHIRP 300W 8-Pin f/Garmin
Transducers, Airmar
$630.19
You save:
$68.50
B150 12 Degree Tilt Medium CHIRP 300W 8-Pin for Garmin As CHIRP continues to redefine recreational fishing, Airmar has expanded its lineup of broadband transducers to satisfy the growing demand for th... More Details
B150M Bronze 20 Degree Thru-Hull 300W 8-Pin As CHIRP continues to redefine recreational fishing, AIRMAR has expanded its lineup of broadband transducers to satisfy the growing demand for this game-cha... More Details
Airmar B164 1kW 0° Thru-Hull Transducer for Simrad w/Blue Connector
Transducers, Airmar
$1,780.99
You save:
$178.10
B164 1kW 0° Thru-Hull Transducer with Blue Connector The B164 is a 1kW bronze low-profile transducer with a fast-response temperature sensor. The transducer is ideal for fast, trailered, tournament, s... More Details
Airmar B164 1kW 20 Degree Tilted Element 8-Pin f/Garmin
Transducers, Airmar
$1,780.99
You save:
$178.10
B164 1kW 20 Degree Tilted Element 8-Pin for Garmin Step up to a 1 kW—without a fairing! The 1 kW, flush-mount, Tilted Element™ transducer is perfect for fast, trailered vessels that cannot accommodate... More Details
Airmar B164 1kW 20° Thru-Hull Transducer w/Blue Connector
Transducers, Airmar
$1,780.99
You save:
$178.10
B164 1kW 20° Thru-Hull Transducer with Blue Connector Step up to a 1kW - Without a Fairing!Airmar has taken our innovative Tilted Element™ technology to a higher power. The 1kW, flush-mount, Tilt... More Details
Airmar B164 Bronze Thru-Hull - 50/200 kHz - 1 kW - 0° Tilted Element - Requires Mix & Match Cable
Transducers, Airmar
$1,780.99
You save:
$178.10
B164 Bronze Thru-Hull - 50/200 kHz - 1 kW - 0° Tilted Element - Requires Mix & Match Cable 0° tilted version for 0 to 7° hull deadrise angles. Step up to a 1 kW—without a fairing! The 1 kW, flush-moun... More Details
Airmar B164 Bronze Thru-Hull - 50/200 kHz - 1 kW - 12° Tilted Element - Requires Mix & Match Cable
Transducers, Airmar
$1,780.99
You save:
$178.10
B164 Bronze Thru-Hull - 50/200 kHz - 1 kW - 12° Tilted Element - Requires Mix & Match Cable 12° tilted version for 8 to 15° hull deadrise angles. Step up to a 1 kW—without a fairing! The 1 kW, flush-m... More Details
Airmar B164 Bronze Thru-Hull - 50/200 kHz - 1 kW - 20° Tilted Element - Requires Mix & Match Cable
Transducers, Airmar
$1,780.99
You save:
$178.10
B164 Bronze Thru-Hull - 50/200 kHz - 1 kW - 12° Tilted Element - Requires Mix & Match Cable 20° tilted version for 16 to 24° hull deadrise angles. Step up to a 1 kW—without a fairing! The 1 kW, flush-... More Details
Airmar B164 Bronze Thru-Hull Transducer w/Humminbird - 14-Pin Plug - 0°
Transducers, Airmar
$1,780.99
You save:
$178.10
B164 Bronze Thru-Hull Transducer w/Humminbird 14-Pin Plug - 0° Step up to a 1kW - Without a Fairing! Airmar has taken our innovative Tilted Element™ technology to a higher power. The 1kW, flush-mount,... More Details
Airmar B164 Bronze Thru-Hull Transducer w/Humminbird - 14-Pin Plug - 12°
Transducers, Airmar
$1,780.99
You save:
$178.10
B164 Bronze Thru-Hull Transducer w/Humminbird 14-Pin Plug - 12° Step up to a 1kW - Without a Fairing! Airmar has taken our innovative Tilted Element™ technology to a higher power. The 1kW, flush-mount... More Details
Airmar B164 Bronze Thru-Hull Transducer w/Humminbird - 14-Pin Plug - 20°
Transducers, Airmar
$1,780.99
You save:
$178.10
B164 Bronze Thru-Hull Transducer w/Humminbird 14-Pin Plug - 20° Step up to a 1kW - Without a Fairing! Airmar has taken our innovative Tilted Element™ technology to a higher power. The 1kW, flush-mount... More Details
Airmar B164 Bronze Thru-Hull Transducer w/Humminbird #9 Plug - 7-Pin - 0°
Transducers, Airmar
$1,780.99
You save:
$178.10
B164 Bronze Thru-Hull Transducer w/Humminbird #9 Plug - 7-Pin - 0° Step up to a 1kW - Without a Fairing! Airmar has taken our innovative Tilted Element™ technology to a higher power. The 1kW, flush-mo... More Details
Airmar B164 Bronze Thru-Hull Transducer w/Humminbird #9 Plug - 7-Pin - 12°
Transducers, Airmar
$1,780.99
You save:
$178.10
B164 Bronze Thru-Hull Transducer w/Humminbird #9 Plug - 7-Pin - 12° Step up to a 1kW - Without a Fairing! Airmar has taken our innovative Tilted Elementâ„¢ technology to a higher power. The 1kW, flush... More Details
Airmar B164 Bronze Thru-Hull Transducer w/Humminbird #9 Plug - 7-Pin - 20°
Transducers, Airmar
$1,780.99
You save:
$178.10
B164 Bronze Thru-Hull Transducer w/Humminbird #9 Plug - 7-Pin - 20° Step up to a 1kW - Without a Fairing! Airmar has taken our innovative Tilted Element™ technology to a higher power. The 1kW, flush-m... More Details
Airmar B175 Bronze Low Frequency 1kW Chirp Transducer 0° Tilt - Requires Mix & Match Cable
Transducers, Airmar
$2,465.99
You save:
$246.60
B175 Bronze Low Frequency 1kW Chirp Transducer 0° Tilt - Requires Mix & Match Cable Airmar’s low profile Chirp-ready transducer models are the perfect addition to smaller boats such as center consoles... More Details
Airmar B175 Medium Ultra-Wide 1kW 12-Degree 12-Pin Connector f/Garmin
Transducers, Airmar
$2,738.63
You save:
$275.36
B175 Medium Ultra-Wide 1kW 12-Degree 12-Pin Connector for Garmin Airmar's innovative transducer designs have revolutionized the fishing world, and they continue to do so with the NEW Chirp-ready B175 ... More Details
Airmar B175H Bronze 0 Degree Thru-Hull 1kW f/Garmin w/8-Pin Connector
Transducers, Airmar
$1,917.99
You save:
$191.80
B175H Bronze 0 Degree Thru-Hull 1kW for Garmin with 8-Pin Connector Airmar’s low-profile, Chirp-ready transducer models are the perfect addition to smaller boats such as center consoles. The high-freq... More Details
Airmar B175H Bronze 12° Thru-Hull Transducer - 1kW, 8-Pin
Transducers, Airmar
$1,917.99
You save:
$191.80
Airmar B175H Bronze Thru Hull with 12° Tilt 8 Pin Connector Airmar’s low-profile, Chirp-ready transducer models are the perfect addition to smaller boats such as center consoles. The high-frequency b... More Details
Airmar B175H Bronze 20 Degree Thru-Hull 1kW f/Garmin w/8-Pin Connector
Transducers, Airmar
$1,917.99
You save:
$191.80
B175H Bronze 20 Degree Thru-Hull 1kW for Garmin with 8-Pin Connector Airmar’s low-profile, Chirp-ready transducer models are the perfect addition to smaller boats such as center consoles. The high-fre... More Details
Airmar B175H Bronze Thru Hull 0° Tilt - 1kW - Requires Mix and Match Cable
Transducers, Airmar
$1,916.63
You save:
$193.16
B175H Bronze Thru Hull 0° Tilt - 1kW Requires Mix and Match Cable B175H Bronze Thru Hull 20 degree Tilt 1KWRely on Airmar’s new broadband transducers for your ultimate fishing mission. Whether you’re ... More Details
Airmar B175H Bronze Thru Hull 12° Tilt - 1kW - Requires Mix and Match Cable
Transducers, Airmar
$1,917.99
You save:
$191.80
B175H Bronze Thru Hull 12° Tilt - 1kW Requires Mix and Match Cable B175H Bronze Thru Hull 20 degree Tilt 1KWRely on Airmar’s new broadband transducers for your ultimate fishing mission. Whether you’re... More Details
Airmar B175H Bronze Thru Hull 20° Tilt - 1kW - Requires Mix and Match Cable
Transducers, Airmar
$1,917.99
You save:
$191.80
B175H Bronze Thru Hull 20° Tilt - 1kW Requires Mix and Match Cable Rely on Airmar’s new broadband transducers for your ultimate fishing mission. Whether you’re a commercial fisherman, charter captain,... More Details
