Hardware
Large Bailer - Outside Mount Flange Size: - 80 x 142mm (3-3/16 x 5-9/16") The ANDERSEN automatic bailers are available world wide and recognized by dinghy sailors as the most effective and reliable me... More Details
Mini Bailer - Outside Mount Flange Size: - 56 x 92mm (2-1/4 x 3-5/8") The ANDERSEN automatic bailers are available world wide and recognized by dinghy sailors as the most effective and reliable means ... More Details
Super Max Bailer - Inside Mount Flange Size: - 78 x 135mm (3-1/8 x 5-5/16") The ANDERSEN automatic bailers are available world wide and recognized by dinghy sailors as the most effective and reliable ... More Details
Super Medium Bailer - Inside Mount Flange Size: - 67 x 135mm (2-11/16 x 5-5/16") The ANDERSEN automatic bailers are available world wide and recognized by dinghy sailors as the most effective and reli... More Details
Super Mini Bailer - Indside Mount Flange Size: - 61 x 106mm (2-7/16 x 4-3/16") The ANDERSEN automatic bailers are available world wide and recognized by dinghy sailors as the most effective and reliab... More Details
'K" Cam Mini Manufactured from Dupont Kevlar/Zytal, K Cams are available in 3 sizes to accept lines up to 14mm (9/16”) in diameter. This advanced material offers performance advantages over carbon fib... More Details
25mm T-Track Genoa Car Barton Marine introduces its sleek range of Genoa Cars designed to run on 25mm (1 ”) T-Track. All GT cars are manufactured from high-grade aluminum with our unique Spectro anodi... More Details
4mm Rope Stoppers - Black - Pair Rope Stoppers can also be referred to as parrel beads, tie balls, halyard stoppers, or stopper balls, and are primarily used in rope management. At the end of a line, ... More Details
Barton 7mm Dyneema Loop w/High Load Eye - 22mm Bore
Hardware, Barton Marine
$153.68
You save:
$17.07
7mm Dyneema Loop with High Load Eye - 22mm Bore The Barton high-load eye with loop is available in three sizes and can be used in various applications on board, including barber hauler, preventers, ma... More Details
Deck Eye - Stainless Steel - 14mm Stainless steel deck eyes with generous eye capacity. Specifications: Stainless Steel Deck Eye Single 14mm Height x 14mm Width x 5mm Fastenings More Details
Deck Organizer Size 1 - 3 Sheave Designed for use when leading control lines and halyards across the coach roof and back to the cockpit. This range features aluminum construction with a grey or black ... More Details
Barton Deck Plate w/Fixing & Eye w/Blanking Plug - M12 Eye
Hardware, Barton Marine
$184.86
You save:
$20.53
Deck Plate with Fixing & Eye with Blanking Plug - M12 Eye Turned from solid bar 316 stainless steel with a highly polished finish, the deck plates have a centre anchoring hole in three standard metric... More Details
Barton Deck Plate w/Fixing & Eye w/Blanking Plug - M8 Eye
Hardware, Barton Marine
$154.29
You save:
$17.14
Deck Plate with Fixing & Eye with Blanking Plug - M8 Eye Turned from solid bar 316 stainless steel with a highly polished finish, the deck plates have a centre anchoring hole in three standard metric ... More Details
High Load Eye 6mm Bore Available in six sizes. Manufactured in marine-grade aluminum with a hard anodized finish. These lightweight high-load eyes are suitable for a variety of uses on board, from laz... More Details
Low Friction Ring Strap Eye - Stainless Steel For the concerning dinghy sailor. Barton has offered stainless steel deck eyes for a long while, but as performance on boats improves, the desire to reduc... More Details
Barton Marine 165mm Sliding Cleat - Fits 25mm T Track
Hardware, Barton Marine
$79.48
You save:
$8.83
165mm Sliding Cleat - Fits 25mm T Track A cost-effective solution to fitting a mid-ship spring cleat where access under the side deck is limited - is simply to remove a Genoa track end stop, slide on ... More Details
35mm Diameter Plain Bearing Sheave A replacement all-purpose rope sheave. Used throughout the complete Barton block range. Molded from UV-resistant acetal resin, the Barton sheave is made to surviv... More Details
58mm Diameter Ball Bearing Rope Sheave A replacement all-purpose rope sheave. Used throughout the complete Barton block range. Molded from UV-resistant acetal resin, the Barton sheave is made to su... More Details
64mm Diameter Ball Bearing Rope Sheave A replacement all-purpose rope sheave. Used throughout the complete Barton block range. Molded from UV-resistant acetal resin, the Barton sheave is made to survi... More Details
Deck Organizer - Size 1 - 5 Sheave Designed for use when diverting mast base control lines and halyards back to the cockpit. Allowing the crew to sail from the security of the cockpit. Suitable for ... More Details
Deck Organizer - Size 1 - 6 Sheave Designed for use when diverting mast base control lines and halyards back to the cockpit. Allowing the crew to sail from from the security of the cockpit. Suitable... More Details
Deck Organizer - Size 2 - 2 Sheave Designed for use when diverting mast base control lines and halyards back to the cockpit. Allowing the crew to sail from the security of the cockpit. Suitable for b... More Details
Barton Marine Deck Organizer - Size 2 - 2 Sheave - Black
Hardware, Barton Marine
$95.02
You save:
$10.56
Deck Organizer - Size 2 - 2 Sheave - Black Designed for use when diverting mast base control lines and halyards back to the cockpit. Allowing the crew to sail from the security of the cockpit. Suita... More Details
Barton Marine Deck Organizer - Size 2 - 3 Sheave - Black
Hardware, Barton Marine
$129.17
You save:
$14.35
Deck Organizer - Size 2 - 3 Sheave - Black Designed for use when diverting mast base control lines and halyards back to the cockpit. Allowing the crew to sail from the security of the cockpit. Suita... More Details
Deck Organizer - Size 2 - 4 Sheave Designed for use when diverting mast base control lines and halyards back to the cockpit. Allowing the crew to sail from the security of the cockpit. Suitable for b... More Details
Barton Marine Deck Organizer - Size 2 - 4 Sheave - Black
Hardware, Barton Marine
$159.42
You save:
$17.71
Deck Organizer - Size 2 - 4 Sheave - Black Designed for use when diverting mast base control lines and halyards back to the cockpit. Allowing the crew to sail from from the security of the cockpit. ... More Details
Barton Marine Deck Organizer - Size 2 - 5 Sheave - Black
Hardware, Barton Marine
$185.43
You save:
$20.60
Deck Organizer - Size 2 - 5 Sheave - Black Designed for use when diverting mast base control lines and halyards back to the cockpit. Allowing the crew to sail from the security of the cockpit. Suita... More Details
Deck Organizer - Size 2 - 6 Sheave Designed for use when diverting mast base control lines and halyards back to the cockpit. Allowing the crew to sail from from the security of the cockpit. Suitable... More Details
Barton Marine Deck Organizer - Size 2 - 6 Sheave - Black
Hardware, Barton Marine
$214.76
You save:
$23.87
Deck Organizer - Size 2 - 6 Sheave - Black Designed for use when diverting mast base control lines and halyards back to the cockpit. Allowing the crew to sail from the security of the cockpit. Suita... More Details
DO 550 Rope Clutch - Base Plate Replacement base plate for any size Barton Marine DO 550 Rope Clutch. *Sold as an Individual Documentation BrochureDownload PDF More Details
DO 550 Rope Clutch - Cam Replacement cam for any size Barton Marine DO 550 Rope Clutch. *Sold as an Individual Documentation BrochureDownload PDF More Details
DO 550 Rope Clutch - Double The Barton D0 550 clutch is designed for cruising and racing yachts. Manufactured from modern lightweight materials to withstand the harsh marine environment. Molded parts ... More Details
DO 550 Rope Clutch - Handle Replacement handle for any size Barton Marine DO 550 Rope Clutch. *Sold as an Individual Documentation BrochureDownload PDF More Details
DO 550 Rope Clutch - Spring Assembly Replacement spring assembly for any size Barton Marine DO 550 Rope Clutch. *Sold as an Individual Documentation BrochureDownload PDF More Details
Drain Plug - Black 15mm (19/32") This screw-type black drain bung is still among the best available. Supplied with rubber `O' ring for a watertight seal. Specifications: Length: 15mm (19/32") weight: ... More Details
Barton Marine Drain Plug and Socket - White 15mm (19/32") Bore
Hardware, Barton Marine
$5.48
You save:
$0.61
Drain Plug and Socket - White 15mm (19/32") Bore This screw-type drain plug and the socket are still among the best available. Also, it's supplied with a rubber ‘O’ ring for a watertight seal. More Details
Furling Top Swivel The top head swivel is from machine-turned solid aluminum with stainless steel ball-bearing. Features: Drum Diameter: 25mm Sail Area: 100 square foot Break Load: 1,108kg Safe Workin... More Details
High Load Eye 12mm Bore Ergonomically designed to maximize the strength and efficiency of the eye. With HV500 hard anodizing and the profile of the curved surfaces, these have been developed to keep f... More Details
High Load Eye 16mm Bore Ergonomically designed to maximize the strength and efficiency of the eye. With HV500 hard anodizing and the profile of the curved surfaces, these have been developed to keep f... More Details
High Load Eye 22mm Bore Ergonomically designed to maximize the strength and efficiency of the eye. With HV500 hard anodizing and the profile of the curved surfaces, these have been developed to keep f... More Details
Kevlar Cam Cleat Maxi Manufactured from a composite Kevlar/Zytal material. This advanced material offers performance advantages over carbon fiber and conventional glass-reinforced resins; 'K' cams are... More Details
Kevlar Cam Cleat Midi Manufactured from a composite Kevlar/Zytal material, this advanced material offers performance advantages over carbon fiber and conventional glass-reinforced resins; 'K' cams are... More Details
Mast Base Organizer - 4 Block The Barton Mast Base Organiser is finished in our unique 'Spectro' grey anodizing for a long-lasting finish. It accepts up to four double tang blocks mounted on individua... More Details
Pillar Fairlead for 70200 Cam Cleat This add-on enables the cam cleat to be engaged from a variety of angles. Cams can be fitted either way around to achieve a lead from in front or behind. Features: ... More Details
Pillar Fairlead for 70300 Cam Cleat This add-on enables the cam cleat to be engaged from a variety of angles. Cams can be fitted either way around to achieve a lead from in front or behind. Features: ... More Details
Quick Cleat - 1/4" - Pair The Barton Marine Quick Cleat range is perfect for novices and seasoned mariners and takes the place of tying and releasing knots. Made of nylon reinforced composite and sec... More Details
Quick Cleat - 5/16" - Black The Barton Marine Quick Cleat range is perfect for novices and seasoned mariners and takes the place of tying and releasing knots. Made of nylon reinforced composite and ... More Details
Quick Cleat - 5/16" - White The Barton Marine Quick Cleat range is perfect for novices and seasoned mariners and takes the place of tying and releasing knots. Made of nylon reinforced composite and s... More Details
Barton Marine Quick Cleat - On a Patch f/Inflatables - 1/4"
Hardware, Barton Marine
$50.03
You save:
$5.56
Quick Cleat - On a Patch for Inflatables - 1/4" The Barton Marine Quick Cleat range is perfect for novices and seasoned mariners and takes the place of tying and releasing knots. The perfect solution... More Details
Quick Cleat - Stainless Steel - 3/8" The Barton Marine Quick Cleat range is perfect for novices and seasoned mariners and takes the place of tying and releasing knots. The heavy-duty version is made ... More Details
Barton Marine Screw Inspection Cover - 6" (103mm) - White
Hardware, Barton Marine
$24.89
You save:
$2.77
Screw Inspection Cover - 6" (103mm) - White These covers are manufactured from high-impact polycarbonate and feature an easy start thread and a built-in ‘O’ ring seal. Documentation Quick GuideDownloa... More Details
Shroud Cleat Barton Marine's Shroud Plain Cleat is a multipurpose cleat that conveniently clamps onto shroud wire (maximum diameter - 8mm (5/16") securely and without causing damage. Features: Clamps ... More Details
Shroud Cleat with Eye Barton Marine's Shroud Plain Cleat with Eye is a multipurpose cleat that conveniently clamps onto shroud wire (maximum diameter - 8mm (5/16") securely and without causing damage.... More Details
Size 1 Deck Organizer - 4 Sheave Designed for use when diverting mast base control lines and halyards back to the cockpit. Allowing the crew to sail from the security of the cockpit. Suitable for boa... More Details
Barton Marine Size 3 45mm Plain Bearing Pulley Block Cheek Block
Blocks, Hardware, Barton Marine
$34.96
You save:
$3.88
Size 3 45mm Plain Bearing Pulley Block Cheek Block The size 3 Barton plain bearing blocks have a 45mm (1 3/4" sheave size 3 block range that incorporates modern design with stainless steel frames and ... More Details
SkyLock 400 The Barton SkyLock is an integral part of the SkyDock lifting system. The clever design and positioning of the locking cams mean the control line will never slip even when accidentally rel... More Details
SkyLock 800 The Barton SkyLock 800 features 316 stainless steel side plates, glass-reinforced nylon cover plates, and an internal self-locking aluminum cam to lift and lock loads securely using lines ... More Details
Stanchion Bullseye Stanchion Bullseye which fits the base of stanchions for smooth control of furling lines. The contemporary sleek design features a Dyneema-effect securing strap over the metal ret... More Details
Stanchion Cleat Designed to fit stanchions or pushpit/pulpit tubes - fits in seconds and features soft nylon jaws that will not damage the tube. Technical Specifications: Material - Nylon Dimensions (... More Details
Transom Bung & Socket Set - Black This screw-type drain bung and socket is still among the best available. They are supplied with a rubber ‘O’ ring for a watertight seal. Documentation Quick GuideDown... More Details
Transom Pintle Manufactured from stainless steel with tough nylon surrounds. A wide range of rudder fitting widths are available. Features: Pintle Diameter: 9.5mm Fastenings Diameter: 5mm Weight: 70g More Details
Barton Single DO 550 Rope Clutch Cruising Racing Max 12mm Line
Blocks, Hardware, Barton Marine
$126.28
You save:
$14.03
Single DO 550 Rope Clutch Cruising Racing Max 12mm Line For cruising and racing yachts, offering a holding power of up to 550 kgs. Modern, high-performance materials. Manufactured from modern lightwe... More Details
Barton Size 1 30mm Plain Bearing Pulley Block Double w/Swivel
Hardware, Barton Marine
$53.58
You save:
$5.95
Size 1 30mm Plain Bearing Pulley Block Double with Swivel The Size 1 Plain Bearing Blocks have a 30mm (1 3/16") sheave. The range is designed with an internal steel frame for added strength and durabi... More Details
Barton Size 1 30mm Plain Bearing Pulley Block Single Fixed Eye
Hardware, Barton Marine
$16.44
You save:
$1.82
Size 1 30mm Plain Bearing Pulley Block Single Fixed Eye The Size 1 Plain Bearing Blocks have a 30mm (1 3/16") sheave. The range is designed with an internal steel frame for added strength and durabili... More Details
Barton Size 4 58mm Plain Bearing Pulley Cheek Block
Blocks, Hardware, Barton Marine
$51.62
You save:
$5.75
Size 4 58mm Plain Bearing Pulley Cheek Block The Size 4 Barton range of blocks has a 58mm (2 5/16″) sheave. They are of a rugged construction featuring high-grade molded side plates that are through-b... More Details
Barton Size 4 58mm Plain Bearing Pulley Upright Block
Hardware, Barton Marine
$62.90
You save:
$6.99
Size 4 58mm Plain Bearing Pulley Upright Block The Size 4 Barton range of blocks has a 58mm (2 5/16″) sheave. They are of a rugged construction featuring high-grade molded side plates that are through... More Details
Barton Size 5 54mm Plain Bearing Pulley Block Reverse Shackle
Blocks, Hardware, Barton Marine
$53.49
You save:
$5.95
Size 5 54mm Plain Bearing Pulley Block Reverse Shackle The Size 5 Barton range of blocks has a 54mm 2 1/8" sheave. They are rugged construction, featuring high-grade molded side plates that are throug... More Details
Barton Size 5 54mm Plain Bearing Pulley Block Single Block Fixed Eye
Blocks, Hardware, Barton Marine
$37.92
You save:
$4.21
Size 5 54mm Plain Bearing Pulley Block Single Block Fixed Eye The Size 5 Barton range of blocks has a 54mm 2 1/8" sheave. They are a rugged construction, featuring high-grade molded side plates that a... More Details
Barton Size 5 54mm Plain Bearing Pulley Block Single Block Swivel
Blocks, Hardware, Barton Marine
$79.72
You save:
$8.85
Size 5 54mm Plain Bearing Pulley Block Single Block Swivel The Size 5 Barton range of blocks has a 54mm 2 1/8" sheave. They are rugged construction, featuring high-grade molded side plates that are th... More Details
Barton Size 6 64mm Plain Bearing Pulley Single Block Fixed Eye
Blocks, Hardware, Barton Marine
$45.90
You save:
$5.10
Size 6 64mm Plain Bearing Pulley Single Block Fixed Eye The Size 6 Barton blocks are designed as our high-load cruiser block range and are of rugged construction. It features high-grade injection mold... More Details
Barton Size 7 70mm Plain Bearing Pulley Block Single Swivel
Blocks, Hardware, Barton Marine
$133.80
You save:
$14.86
Size 7 70mm Plain Bearing Pulley Block Single Swivel The size 7 Barton high-load cruising block range is engineered for superior strength and performance and offers both plain and ball-bearing sheave ... More Details
Spinnaker Pole Slide Car (32mm) Features a heavy-duty stainless steel ring welded to an attachment plate, which is through-bolted to the slide. Generous ring opening to accept most pole ends. Plain be... More Details
Barton Stainless Steel Split Rings - 10mm - 10-Pack
Hardware, Shackles/Rings/Pins, Barton Marine
$6.87
You save:
$0.76
Stainless Steel Split Rings - 10mm - 10-Pack Features: Easy-fit stainless steel split rings for use with our clevis pins Supplied in packs of 10 Specifications: Weight: 3g Dimensions: 30mm x 30mm x 4m... More Details
Traveller Eye (Pair) Size 0, 16mm Features: Size 0 16mm Traveller Eye Pair Recirculating ball bearing dinghy traveller range Complementing Barton’s successful larger traveller range, the dinghy travel... More Details
Triple DO 550 Rope Clutch Modern, high-performance materials. Manufactured from modern lightweight materials, the DO 550 molded parts are from high-grade plastics that are strong, light, and impact-re... More Details
Tubular Cleat - 6mm These handy cleats have many uses where light loads are expected. Specifications: Weight: 5g Dimensions: 55mm x 13mm x 14mm Size: 55mm Fastenings: 4mm More Details
C. Sherman Johnson "Captain Hook" Chain Snubber Large Snubber Hook f/3/8" & 1/2" Chain w/15' of 5/8" 3 Strand Nylon
Hardware, C. Sherman Johnson
$343.33
"Captain Hook" Chain Snubber Large Snubber Hook for 3/8" & 1/2" Chain with 15' of 5/8" 3 Strand Nylon The "Captain Hook" Chain Snubber can be used in a few different ways: Use the claw and attached li... More Details
C. Sherman Johnson "Captain Hook" Chain Snubber Large Snubber Hook Only (1/2" T-316 Stainless Steel Stock)
Hardware, C. Sherman Johnson
$145.60
"Captain Hook" Chain Snubber Large Snubber Hook Only (1/2" T-316 Stainless Steel Stock) The "Captain Hook" Chain Snubber can be used in a few different ways: Use the claw and attached line to relieve ... More Details
C. Sherman Johnson "Captain Hook" Chain Snubber Small Snubber Hook f/1/4" & 5/16" Chain w/12' of 1/2" 3 Strand Nylon
Hardware, C. Sherman Johnson
$242.90
"Captain Hook" Chain Snubber Small Snubber Hook for 1/4" & 5/16" Chain with 12' of 1/2" 3 Strand Nylon The "Captain Hook" Chain Snubber can be used in a few different ways: Use the claw and attached l... More Details
C. Sherman Johnson "Captain Hook" Chain Snubber Small Snubber Hook Only (5/16" T-316 Stainless Steel Stock)
Hardware, C. Sherman Johnson
$105.29
"Captain Hook" Chain Snubber Small Snubber Hook Only (5/16" T-316 Stainless Steel Stock) The "Captain Hook" Chain Snubber can be used in a few different ways: Use the claw and attached line to relieve... More Details
Anchor Chain Claw-Hook Tensioner The "Claw Hook" design features a shorter overall length. The claw design will grab 1/4", 5/16" and 3/8" chain. The toggled claw enables you to grab the chain quickly ... More Details
Diamond Pad Eye This pad eye can be used on deck for life lines or other applications and has a safe working load of 750 pounds. Specifications: 1/4 in. Bail Length: 2-5/8 in. Width: 1-1/2 in. More Details
Hinged Pad Eye- 1/4" C. Sherman Johnson Pad Eyes fold flat when not in use. The eye gives with the load unlike rigid pad eyes; material reducing the load on the fastenings. A friction drag insures tha... More Details
Hinged Pad Eye- 3/8" C. Sherman Johnson Pad Eyes fold flat when not in use. The eye gives with the load unlike rigid pad eyes; material reducing the load on the fastenings. A friction drag insures tha... More Details
Hinged Pad Eye- 5/16" C. Sherman Johnson Pad Eyes fold flat when not in use. The eye gives with the load unlike rigid pad eyes; material reducing the load on the fastenings. A friction drag insures th... More Details
Rigging Tape - Black - 1" x 15' C. Sherman Johnson has brought back the self-amalgamating rigging tape that started the craze in the 70's. This tape works well at covering up those exposed cotter pins... More Details
Rigging Tape - White - 1" x 15' C. Sherman Johnson has brought back the self-amalgamating rigging tape that started the craze in the 70's. This tape works well at covering up those exposed cotter pins... More Details
Hinged Mini Pad Eye - 3/16" This pad eye is a smaller version of our popular #48-580 pad eye. This unit is suitable for awnings and many other tie-down applications. The working load should not exceed... More Details
Shroud Cleat Features: All stainless steel construction, compatible with you stainless steel rigging Will not corrode Easily attached to 5/32" thru 3/8" diameter wire or rod Ideal for flag, radar refl... More Details
Flat/Large Sail Track Stops Flat/Large: 0.75 x 1 x 0.125" (19 x 25 x 3mm) When it's time to lower your sail you can rely on Davis' Flat Sail Track Stops to hold your sail and its slides in place on th... More Details
Flat/Small Sail Track Stops Flat/Small: 0.42 x 1 x 0.125" (11 x 25 x 3mm) When it's time to lower your sail you can rely on Davis' Flat Sail Track Stops to hold your sail and its slides in place on th... More Details
Round Sail Track Stops Round 0.50" dia. x 0.875" (13 x 22mm) When it's time to lower your sail you can rely on Davis' Round Sail Track Stop to hold your sail and its slides in place on the mast and bo... More Details
Tiller-Tamer Maintains cruising course with no hands, in any weather or wind condition. The tension is smoothly adjustable from fully locked to fully free. Tiller-Tamer gives improved control and feel... More Details
12mm Bolt-Down Fairlead - Single Harken Bolt-Down Fairleads are used on boats 6–15 m (20–50 ft) as shallow-angle line deflectors. These weight-saving fairleads are built of 6061-T6 Hard Lube-anodized ... More Details
13mm Low Beam Track - 2M This track is extruded from high-grade 6061-T6 aluminum and hard coat-anodized for a hard, long-lasting surface. Specifications: Weight (g): 429 g Weight (oz): 15.1 oz Mountin... More Details
29mm Carbo Double Swivel Symmetrical Fishing Pulley Designed to improve the deployment and retraction responsiveness and the precise presentation of bait teasers aboard sport fishing boats. The unit f... More Details
37.12mm Forged Eyestrap Eyestraps are useful accessories. They form light-duty mounting bases for blocks, serve as lash-down points, and can be used for fairleads. Specifications: Weight: 10g / .35oz... More Details
Micro Cam-Matic Aluminum Cleat Harken® ball bearing cam cleats hold lines securely and release instantly for easy, precise trimming. Aluminum Cam-Matics® are hardcoat-anodized for high-load, high-wear... More Details
Micro Cam-Matic Aluminum Cleat Kit with Wire Fairlead Wire fairleads maintain a low profile while holding the line close to the cleat. Kit includes 468 Cam-Matic® and 475 wire fairlead. Specifications... More Details
Micro Carbo-Cam Base with Bullseye Micro Carbo-Cam® with bullseye keeps line fair. Mounts on stainless steel base. Specifications: Height: 22mm / 7/8in. Weight: 50g / 1.75oz Minimum line: 3mm / 1/8in ... More Details
