BEP Easy Fit Battery Switch - 275A Continuous
|
Special Order
BC, Warehouse
"Special Order" items will take longer to process and ship then "Express" items. Typically takes no more then 14 days for delivery. For next day parts. Visit our express parts catalog Here. In Stock
|
$84.78
Easy Fit Battery Switch - 275A Continuous
The Easyfit Battery Switch was created for installations where switches need to be recessed through varying thicknesses of panels. It achieves this through an easily removable threaded ring that allows for panel thicknesses up to 3/4" (19 mm). This switch uses the same features as the 701 with the removable key 45 degree past the off position, labeled handle and a removable back cover covering exposed terminals to meet ABYC specifications. It can also be surface mounted offering a unique style compared to other switches available on the market. BEP Marine Battery Switch Test Procedures (UL 1107) Continuous (1 hour), intermittent (5 minutes) and Cranking (engine starting - 10 seconds). The test is to determine the maximum current the switch can handle for the stated time, without the rear terminals exceeding 100 deg C (212 deg F) above the ambient temperature. The continuous and intermittent ratings are tested at 110% of specified ratings. All BEP switches are tested Independently to this specification by a 3rd party laboratory.
Features:
The Easyfit Battery Switch was created for installations where switches need to be recessed through varying thicknesses of panels. It achieves this through an easily removable threaded ring that allows for panel thicknesses up to 3/4" (19 mm). This switch uses the same features as the 701 with the removable key 45 degree past the off position, labeled handle and a removable back cover covering exposed terminals to meet ABYC specifications. It can also be surface mounted offering a unique style compared to other switches available on the market. BEP Marine Battery Switch Test Procedures (UL 1107) Continuous (1 hour), intermittent (5 minutes) and Cranking (engine starting - 10 seconds). The test is to determine the maximum current the switch can handle for the stated time, without the rear terminals exceeding 100 deg C (212 deg F) above the ambient temperature. The continuous and intermittent ratings are tested at 110% of specified ratings. All BEP switches are tested Independently to this specification by a 3rd party laboratory.
Features:
- Can easily be retro-fitted in place of most European post and lever type switches
- Molded in high temperature, fiber reinforced plastics
- Tin-plated copper studs and nuts
- Ignition-protected
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
Accessories
- SKU 31864 — MFG# 114002
- SKU 31865 — MFG# 114502
- SKU 48302 — MFG# 117010
- SKU 48304 — MFG# 117510
- SKU 48410 — MFG# 252266
- SKU 48411 — MFG# 242266
- SKU 48417 — MFG# 252276
- SKU 48418 — MFG# 242276
- SKU 48430 — MFG# 252286
- SKU 48432 — MFG# 242286
- SKU 48438 — MFG# 252296
- SKU 48439 — MFG# 242296
- SKU 48496 — MFG# 119505
- SKU 48505 — MFG# 252726
- SKU 48506 — MFG# 242726
- SKU 53292 — MFG# 119002
- SKU 59927 — MFG# 119005
- SKU 61707 — MFG# 115002
- SKU 61710 — MFG# 115502
- SKU 61716 — MFG# 116002
- SKU 61719 — MFG# 116502
- SKU 61725 — MFG# 117002
- SKU 61727 — MFG# 117502
- SKU 70024 — MFG# 119502
