Attwood Marine
Spring loaded closure.... More Details
Die-cast ZAMAK combination light with perma-plate® finish provides 1 mile visibility for power boats up to 39.4' in length. Mounts on decks with external screws. Includes 7-1/2 watt lamp and 7" hard w... More Details
Attwood fuel tank fittings and hose fittings are suitable for use with leaded, unleaded, ethanol blended and alcohol-blended fuels. Clamps are not included. Use thread sealant tape on all threads. LP ... More Details
Economical and lightweight. Palm grip. Varnish finish.... More Details
This submersible pump is a great way to remove unwanted water from boats, pool covers, aquariums and sump pits. Convenient and safe because it needs no electrical cord. It runs up to 5 hours on three ... More Details
The new and improved Turbo 4000 Series II is quieter and has a re-engineered housing that resists deformation during installation and prevents blade to housing interference. Utilizing advanced blade d... More Details
Quickly flushes away salt, sand, silt, and alkali to prevent clogging and corrosion. The flusher attaches easily to an ordinary garden hose. Reinforced polypropylene. Self-adjusting clamping yoke fits... More Details
Quickly flushes away salt, sand, silt and alkali to prevent clogging and corrosion. The flusher attaches easily to an ordinary garden hose. Reinforced polypropylene. self-ajusting clamping yoke fits m... More Details
1-mile, 225° Red/Green light visibility for boats up to 39.4' (12m) in length. Includes 8 watt wedge-base lamp. 2-pin locking collar "universal fit" pole.... More Details
Attwood fuel tank fittings and hose fittings are suitable for use with leaded, unleaded, ethanol blended and alcohol-blended fuels. Clamps are not included. Use thread sealant tape on all threads. LP ... More Details
Patented in-line-design provides ventilation for engine compartments, galleys, bilges and heads. Mounting feet allow horizontal or vertical installation in confined spaces.... More Details
Safe and easy quick disconnect system. For use where a plug and socket cannot be used. Heavy duty 10-gauge connector. Replaces battery clips.... More Details
Strong 2" wide webbing. Quick release (over-center) buckle. Zinc alloy plated finish. Heavy gauge, vinyl-coated, corrosion-resistant S-hook. Hook-N-Loop closure secures the buckle handle in the lock p... More Details
Welded, zinc-plated, solid steel chain links with 2 S-hook safety clips. Safety chains can prevent runaway trailer in case of hitch / coupler failure... More Details
Tethered 1/4" Spring-Loaded Clevis Pin, Stainless Steel - 66202-3 - 23-662023F1
Attwood Marine
$22.70
Stainless steel clevis pin comes w/nylon covered stainless steel lanyard. For use with deck or rail mounted bimini top hinge fittings that use removable 1/4" spring-loaded clevis pins.... More Details
Two-mile, 360° visibility, for boats up 65.6 ft. (20m). Stores easily in less space than conventional stern light and can be removed quickly from the any Attwood pole light base. Aluminum pole telesco... More Details
Mounts on any surface from horizontal up to a 24 degree angle. Wire leads do not flex or hinge with the float like some competitive models. Integral cover dampens bilge sloshing and filters debris. Se... More Details
Designed for drift fishing, pan fishing, and more3/8" diameter coated steel rodUV-resistant plastic coating, protects the rod butt and handleStainless steel wing nut and stemAll Include 50713 surface ... More Details
2-mile, 360° visibility, for boats up to 39.4' (12 meters) in length. ZAMAK base with swivel cover that protects the socket when light is stowed. Base extends just 3" below deck. Includes 8-watt wedge... More Details
Backed by Attwood's trusted Lifetime Warranty! Why specify plastic parts when these fittings will last the life of the boat. The scupper flap is tough neoprene rubber with a molded V that fits into th... More Details
The S3 uses a proprietary electronic sensing technology and is engineered to operate in any bilge water mixture without failure and reduce continuous cycling. Fully sealed electronics are protected fr... More Details
Increase your odds with easier access to your rod and reel. Extends the height of the rod holder by 6", allowing for faster access when that fish strikes. Made from super tough glass filled nylon. Wor... More Details
Replacement bolt for battery tray.... More Details
Die-cast ZAMAK with chrome finish. 2-pin base for 12 degree angled pole. Swivel cover protects the socket. Includes 7-1/2" wire leads for connection to 12 VDC power supply. Dimensions: 4" x 1-5/8". Ca... More Details
Die-cast ZAMAK with chrome finish. 2-pin base for 12 degree angled pole. Swivel cover protects the socket. Includes 7-1/2" wire leads for connection to 12 VDC power supply. Dimensions: 4" x 1-5/8". Ca... More Details
EPA COMPLIANT / CARB CERTIFIED.Multi layer bulb designed for high performance priming in the harsh marine environment. Multi-layer design prevents over-pressure bursting and vacuum collapse preventing... More Details
EPA COMPLIANT / CARB CERTIFIED.Multi layer bulb designed for high performance priming in the harsh marine environment. Multi-layer design prevents over-pressure bursting and vacuum collapse preventing... More Details
New design holds larger dia. anti-glare pole lights. Resilient plastic clip holds standard 3/4" dia. poles. Ideal for storing and protecting plug-in pole lights. 2" L x 1-1/2" H. One hole for #8 screw... More Details
A Plug-In Base for Angled Locking Collar Poles. This tough, resilient 2-pin base is used for angled pole lights with locking collars. Ideal for installation in close quarters, such as narrow gunwales ... More Details
Attwood fuel tank fittings and hose fittings are suitable for use with leaded, unleaded, ethanol blended and alcohol-blended fuels. Clamps are not included. Use thread sealant tape on all threads. LP ... More Details
Allows the addition of the exact amount of oil required for a 2-cycle engine Oil level marks are in gallons and liters... More Details
Attwood fuel tank fittings and hose fittings are suitable for use with leaded, unleaded, ethanol blended and alcohol-blended fuels. Clamps are not included. Use thread sealant tape on all threads. LP ... More Details
A clean, contemporary, louver designed vent. Corrosion-resistant paintable ABS plastic. Install with #8 fasteners. For use with collector boxes 13411 for 3" systems. Sized for installation even on hig... More Details
All-welded 304 stainless steel construction with polished finish. Adapts to 3" or 4" ventilation systems. Predrilled with six mounting holes to accommodate #8 screws. Dimensions: 11-5/16" L x 4-3/8" H... More Details
Supports anchors up to 20 lbs. with 1/4" to 1/2" dia. line. Controls anchor from any position. Zinc-plated steel.... More Details
Extremely compact, just 1.63" long. With electro-polished 316 Stainless covers and fully sealed electronics. Perfect for step, accent, and courtesy lighting; the Micro Light can be used in rod storage... More Details
Extremely compact, just 1.63" long. With electro-polished 316 Stainless covers and fully sealed electronics. Perfect for step, accent, and courtesy lighting; the Micro Light can be used in rod storage... More Details
These LED lights exceed the output of comparable halogen lights while using 20% of the power. Lights stay cool to the touch and eliminate the burn hazard that halogen lighting can present. Fully potte... More Details
