Fultyme Rv
Fultyme Rv Led Sealed Utility Light - 1158 - 590-1158F1
Raw output: 224 lumens, Effective output: 168 lumens Sealed & waterproofCompact, surface mount designIncludes both lead and ground wireCSA certified for use in sleeping quartersSnap-on trim ring includedPolycarbonate lens and housing12.8VDC - 0.020A
Fultyme Rv Led Single Interior Light - 1107 - 590-1113F1
On/Off switch, 9-LEDs. Raw lumen output: 460, Effective lumen output: 407. Bright white light for interiors and work spaces (~3150K)Lights with snap-on lensLEDs use 90% less energyHard wired with separate ground wireSurface mount with switch (CSA)Polycarbonate12.8VDC - 0.3A
Fultyme Rv Led Thinline Sealed Light Bar - 1155 - 590-1155F1
Red thinline stop/turn/tail light with built-in reflex. Sonically sealed, waterproofLow profile-only 5/8" thickSurface mount on 14-1/8" centersHard wired with separate ground wirePolycarbonate lens and housing12.8VDC - .350A Stop, .022 Tail
Fultyme Rv Led Thinline Sealed Light Bar - 1156 - 590-1156F1
Red thin line stop/turn/tail light. Sonically sealed, waterproofLow profile-only 1-3/8" high x 1" thickSurface mount on 16-1/8" centersHard wired with separate ground wirePolycarbonate lens and housing12.8VDC -.350A Stop/Turn, .022A Tail
Fultyme Rv Low Profile Combination Tail Light, Driver Side - 590-1137 - 590-1137F1
Combination stop/turn/tail light for surface mount Snap-on lens and replaceable bulbHard wired, ground wire includedAcrylic lens and plastic housing12.8VDC - 2.65A Stop, 2.10A TailDrivers side includes license plate illuminator and mounting bracket.
Fultyme Rv Low Profile Combination Tail Light, Passenger Side - 590-1136 - 590-1136F1
Combination stop/turn/tail light for surface mount Snap-on lens and replaceable bulbHard wired, ground wire includedAcrylic lens and plastic housing12.8VDC - 2.65A Stop, 2.10A Tail
Fultyme Rv Marker/Clearance Light With Reflex, Red Lens, Black Base - 1105 - 590-1105F1
Surface mount on 3" centers Lens with reflex eliminates need for separate reflectorTwist-in socket with separate ground wireAcrylic lens, ABS housing12.8VDC - 0.2A
Fultyme Rv Marker/Clearance Light With Reflex, Red Lens, White Base - 1104 - 590-1104F1
Surface mount on 3" centers Lens with reflex eliminates need for separate reflectorTwist-in socket with separate ground wireAcrylic lens, ABS housing12.8VDC - 0.2A
Fultyme Rv Marker/Clearance Light With Reflex, Red Lens, White Base - 1107 - 590-1107F1
Snap-on, replaceable lens Surface mount on 3" centersLens with reflex eliminates need for separate reflectorTwo-wire design includes both lead and ground wire for mounting to all surfacesAcrylic lens, ABS housing12.8VDC - 0.06A
Fultyme Rv Marker/Clearance Light With Reflex, Yellow Lens, Black Base - 1103 - 590-1103F1
Surface mount on 3" centers Lens with reflex eliminates need for separate reflectorTwist-in socket with separate ground wireAcrylic lens, ABS housing12.8VDC - 0.2A
Fultyme Rv Marker/Clearance Light With Reflex, Yellow Lens, White Base - 1102 - 590-1102F1
Surface mount on 3" centers Lens with reflex eliminates need for separate reflectorTwist-in socket with separate ground wireAcrylic lens, ABS housing12.8VDC - 0.2A
Fultyme Rv Marker/Clearance Light With Reflex, Yellow Lens, White Base - 1106 - 590-1106F1
Snap-on, replaceable lens Surface mount on 3" centersLens with reflex eliminates need for separate reflectorTwo-wire design includes both lead and ground wire for mounting to all surfacesAcrylic lens, ABS housing12.8VDC - 0.06A
Fultyme Rv Oval Porch/Utility Light W/O Switch, Yellow/ Black Housing - 590-1120 - 590-1120F1
Surface mount porch utility light Snap-on lens and replaceable bulb (1141)Hard wired with separate ground wireAcrylic lens and plastic housing12.8VDC - 1.4A
Fultyme Rv Oval Porch/Utility Light W/O Switch, Yellow/ White Housing - 590-1119 - 590-1119F1
Surface mount porch utility light Snap-on lens and replaceable bulb (1141)Hard wired with separate ground wireAcrylic lens and plastic housing12.8VDC - 1.4A
Fultyme Rv Oval Porch/Utility Light W/Switch, Clear/ Black Housing - 590-1125 - 590-1125F1
Surface mount porch utility light Snap-on lens and replaceable bulb (1141)Hard wired with separate ground wireAcrylic lens and plastic housing12.8VDC - 1.4A
Fultyme Rv Oval Porch/Utility Light W/Switch, Clear/ White Housing - 590-1124 - 590-1124F1
Surface mount porch utility light Snap-on lens and replaceable bulb (1141)Hard wired with separate ground wireAcrylic lens and plastic housing12.8VDC - 1.4A
Fultyme Rv Receiver Mount Hook - 20212015 - 590-2114F1
Fits 2" x 2" hitch receivers. Powder coated. Do not exceed vehicle towing capacity.
Fultyme Rv Rectangular Porch/Utility Light W/O Switch, Yellow - - 590-1115F1
Surface mount porch/cabin lights (CSA/UL listed)White housing with snap-on lens and replaceable bulb (1141)Hard wired with separate ground wireAcrylic lens and plastic housing12.8VDC - 1.4A
Fultyme Rv Rectangular Porch/Utility Light W/Switch, Clear - 590-1118 - 590-1118F1
Surface mount porch/cabin lights (CSA/UL listed) White housing with snap-on lens and replaceable bulb (1141)Hard wired with separate ground wireAcrylic lens and plastic housing12.8VDC - 1.4A
Fultyme Rv Rectangular Porch/Utility Light W/Switch, Yellow - 590-1117 - 590-1117F1
Surface mount porch/cabin lights (CSA/UL listed)White housing with snap-on lens and replaceable bulb (1141)Hard wired with separate ground wireAcrylic lens and plastic housing12.8VDC - 1.4A
Fultyme Rv Saddle Mount Wiper Blades, 32" - 590-1213 - 590-1213F1
Fits both 13.6mm and 17mm saddle arms. You will notice the extra heavy frame construction right away. Designed for a wide range of vehicles from truck, to bus, to RV, and many other specialty vehicles. All wiper blades are designed with our DuraTex all-natural compression molded rubber.
Fultyme Rv Toilet Conditioner - 4008 - 590-4008F1
An effective blend of detergents, lubricants and odor control agents formulated to clean, lubricate and deodorize RV and marine toilets, sinks and drains. Unique odor killing ingredients and odor counteractants absorb and eliminate offensive smells rather than masking them with strong fragrances. Leaves behind a fresh clean scent. Special lubricants keep submerged parts moving smoothly without damaging leather, rubber or synthetic seals.
Fultyme Rv, Bannercamp24X48 Banner - 590-Bannercamp24X48 - 590-Bannercamp24X48F1
13 oz Block Out VinylPrinted on both sidesSize: 48" W x 24" HFabrication: Hem: 1''#2 Grommets on all four corners
Fultymerv 2100 Electric Trailer Jack - 2100 - 590-2100F1
12 Volt DC powered with manual crank over-ride. Oversized, adjustable zinc footpad prevents divots. Fastens to A-frame couplers; fasteners included. Industrial design cover, hardened steel gears with water resistant motor and gear housing. Durable powder coat finish. LED light for easy night time hookups. With ground wire. Full 25" stroke: (18" power plus 7-1/8" manual drop leg extension) Height range: 8-1/2" to 31-1/2"
Fultymerv 2101 Electric Trailer Jack - 590-2101 - 590-2101F1
12 Volt DC powered with manual crank over-ride. Oversized, adjustable zinc footpad prevents divots. Fastens to A-frame couplers; fasteners included. Industrial design cover, hardened steel gears with water resistant motor and gear housing. Durable powder coat finish. LED light for easy night time hookups. With quick plug-in 7-way connector, and plastic holder keeps your 7-way connector firmly in place.Full 25? stroke: (18? power plus 7-1/8? manual drop leg extension) Height range: 8-1/2" to 31-1/2"
Fultymerv 2102 12V Electric Jack - 3,500 Lbs. Capacity - 590-2102 - 590-2102F1
Manual crank overrideFastens to A-frame couplers; fasteners includedQuick plug-in 7-way connectorPlastic holder keeps 7-way connector firmly in placeCorrosion-resistant powder-coated finishLED light for easy night time hookupsFootplate minimizes sinking in soft ground Height range: 9" - 31-1/2" from ground to center of mounting
Fuse Holder - 590-3024 - 590-3024F1
Panel mount. For 1/4" x 1 1/4" fuses. (fuses not included), with bayonet-type knob spring pressure contact. Complete with gasket and nut. For panels through 5/16".
Grease Cap - 590-1063 - 590-1063F1
Steel caps for most common application used in bearing kits.
Heavy Duty Drop Leg Trailer Jack 2500# Capacity - 1033 - 590-1033F1
Fixed mount jack with drop leg. Suited for heavy duty applications and fits trailer frames up to 3" x 5". Bolt-on style and includes all mountinghardware. 31" of lift.
Identification Light Bar - 590-1168 - 590-1168F1
Meets the requirements of SAE/DOT/FMVSS/CMVSS standards when properly installed Surface mount on 7-1/2" centersSealed, waterproof lightsHard wired, power and groundPolycarbonate lens and housing, ABS base
In-Line Fuse Holder/Ato-Atc12 Gauge - 590-3037 - 590-3037F1
Water resistant. Easy to install, easy to change ATO-ATC fuse holder. Used in most recreational vehicles. Comes with cap to seal out moisture. Brass electrical contacts. Fuse included.
In-Line Fuse Holder/Ato-Atc16 Gauge - 3036 - 590-3036F1
Water resistant. Easy to install, easy to change ATO-ATC fuse holder. Used in most recreational vehicles. Comes with cap to seal out moisture. Brass electrical contacts. Fuse included.
Led 6" Oval Sealed Lights For Surface Mount - - 590-1160F1
Meets the requirements of SAE/DOT/FMVSS/CMVSS standards when properly installed. Mount in any 360 degree positionSonically sealed, waterproofFlange surface mount-no panel cut-out required3-function: Red stop/turn/tail light
Led 6" Oval Sealed Tail Light Kit For Flush Mount - - 590-1159F1
Meets the requirements of SAE/DOT/FMVSS/CMVSS standards when properly installed Sonically sealed, waterproofKit includes light, grommet and plug3-Function: Red stop/turn/tail lightWith A70GB grommet and A47PB pigtail, PL-3 connection
Led Courtesy Interior Light - - 590-3004F1
12V. 4 LED lights. Pre-drilled to accommodate #6 screws. 3" Dia. x 5/8" D. Packed with both chrome and white bezels.
Led Mini Sealed Marker/Clearance Light - - 590-1161F1
Meets the requirements of SAE/DOT/FMVSS/CMVSS standards when properly installed Sonically sealed, waterproofAccepts standard 1 or 2-wire plugsSingle wire design grounds through mounting hardwareBase and mounting hardware includedSingle diodePolycarbonate lens and housing
Led Mini Sealed Marker/Clearance Light - - 590-1162F1
Meets the requirements of SAE/DOT/FMVSS/CMVSS standards when properly installed Sonically sealed, waterproofAccepts standard 1 or 2-wire plugsSingle wire design grounds through mounting hardwareBase and mounting hardware includedSingle diodePolycarbonate lens and housing
Led Sealed 3-Piece Identification Light Bar - - 590-1166F1
Meets the requirements of SAE/DOT/FMVSS/CMVSS standards when properly installed Designed for Over 80" Wide Trucks/TrailersWaterproof9 LED lightsSingle wireGrounds through mounting hardwareStainless steel base
Led Sealed Identification Light Bar - 590-1165 - 590-1165F1
Meets the requirements of SAE/DOT/FMVSS/CMVSS standards when properly installed Sonically sealed, waterproofPolycarbonate lens and housingDesign includes both lead and ground wire
Locking Pin - 590-1036 - 590-1036F1
Keeps coupler release handle from disengaging while in travel. Will not prevent theft.
Main Battery Switch - 590-3017 - 590-3017F1
Ignition protected. Use as main disconnect switch. Red plastic housing with large black plastic knob. For use with systems under 50V - 250A continuous / 360A intermittent.Made in the USA.
Manual Circuit Breaker30 Anp - 590-3039 - 590-3039F1
12/24V DC Type III manual resetPlastic body with molded mounting bracketsTwo 10/32 threaded studsPush to reset
Manual Circuit Breaker40 Amp - 590-3040 - 590-3040F1
12/24V DC Type III manual resetPlastic body with molded mounting bracketsTwo 10/32 threaded studsPush to reset
Manual Circuit Breaker50 Amp - 590-3041 - 590-3041F1
12/24V DC Type III manual resetPlastic body with molded mounting bracketsTwo 10/32 threaded studsPush to reset
Molded Line Connector - 590-3068 - 590-3068F1
Corrosion resistant construction. For 6, 12 and 24 volt applications. 7A @ 12V.
Plastic Wire Cover - 590-3084 - 590-3084F1
Gives vehicle that finished look. Covers unsightly wire pass-thru holes. Made of durable black plastic that will not corrode. Covers holes up to 1-1/4 in diameter.
Rocker Switch On (Red)/Off - 590-3021 - 590-3021F1
Snap mount thermo-plastic housing 12V - 15AFits panels up to 1/4 thickOverall size: 1-3/4" x 1-5/16"Cut-out size: 1" x 3/4". With plug-in type terminals
Rocker Switch On (Red)/Off/On (Red) - 3023 - 590-3023F1
Snap mount thermo-plastic housing 12V - 15AFits panels up to 1/4 thickOverall size: 1-3/4" x 1-5/16"Cut-out size: 1" x 3/4". With plug-in type terminals
Round Connector Bracket For Mounting 6 And 7 Way Adapters - 590-2026 - 590-2026F1
Conveniently attaches electrical connector mounting brackets to trailer hitch cross tubes without cutting, welding or drilling. Convenient hose clamp mountingBlack powdercoat finishContains: Mounting Bracket, Attachmant Clamp, (2) Bolts & Lock Nut
Seachoice 2127 Leveling Block Caps4 Pack (Caps Only) - 590-2127 - 590-2127F1
Distributes vehicle weight more evenly-creates a more stable / secure surface Distributes vehicle weight more evenly-creates a more stable / secure surfaceSafe, versatile, and easy to useEasy to clean heavy duty polypropyleneCap provides a flat mounting surfaceHi-Vis GreenPad / Cap Size: 8-1/2" x 8-1/2" x 1-1/8"Includes a durable carry/storage bag Do not stack more than 4 high. Do not use with any other leveling block system.
Seachoice 2128 Leveling Blocks10 Pack (8 Pads + 2 Caps) - 590-2128 - 590-2128F1
Distributes vehicle weight more evenly-creates a more stable / secure surface Distributes vehicle weight more evenly-creates a more stable / secure surfaceSafe, versatile, and easy to useEasy to clean heavy duty polypropyleneCap provides a flat mounting surfaceHi-Vis GreenPad / Cap Size: 8-1/2" x 8-1/2" x 1-1/8"Includes a durable carry/storage bag Do not stack more than 4 high. Do not use with any other leveling block system.
Seachoice 2963 Adapter Cord30A Female, 15A Male - A10-2963 - 590-2963F1
Heavy-duty Heavy-dutyFor RV use onlyFinger grip handleLength: 12"
Seachoice 2964 Adapter Cord50A Female, 15A Male - A10-2964 - 590-2964F1
Heavy-duty For RV use onlyFinger grip handleLength: 12"
Seachoice 2966 Adapter Cord50A Female, 30A Male - A10-2966 - 590-2966F1
Heavy-duty For RV use onlyFinger grip handleLength: 12"
Seachoice 2967 Adapter Cord30A Female, 50A Male - A10-2967 - 590-2967F1
Heavy-duty For RV use onlyFinger grip handleLength: 12"
Seachoice Rv Bathroom & Sink Cleaner - 4007 - 590-4007F1
Multi-purpose and multi-surface non-acid cleaner makes cleaning easy. For use on most household surfaces. Works to remove a variety of soils from toilets, bathtubs, showers, sinks and more. Easily cleans glazed ceramic tile, glazed porcelain surfaces, sealed fiberglass, metal sinks, countertops, chrome fixtures and other nonporous surfaces. Effectively removes soap scum and hard water stains from showers, tubs and sinks. May be added to toilet bowls and left overnight, leaving a fresh deodorizing fragrance. Biodegradable.
Seachoice Trailer Coupler Ball - - 590-2111F1
Made of chrome plated steel. Complete with lock washer and nut. Packaging can be peg-hooked or self standing.
Seachoice Trailer Coupler Ball - - 590-2112F1
Made of chrome plated steel. Complete with lock washer and nut. Packaging can be peg-hooked or self standing.
Seachoice Trailer Coupler Ball - - 590-2113F1
Made of chrome plated steel. Complete with lock washer and nut. Packaging can be peg-hooked or self standing.
Seachoice Trailer Coupler Ball - 2110 - 590-2110F1
Made of chrome plated steel. Complete with lock washer and nut. Packaging can be peg-hooked or self standing.
Seachoice Trailer Coupler Ball - 590-1019 - 590-1019F1
Made of chrome plated steel. Complete with lock washer and nut. Packaging can be peg-hooked or self standing.
Seachoice Trailer Coupler Ball - 590-1020 - 590-1020F1
Made of chrome plated steel. Complete with lock washer and nut. Packaging can be peg-hooked or self standing.
Seachoice Trailer Coupler Ball - 590-1021 - 590-1021F1
Made of chrome plated steel. Complete with lock washer and nut. Packaging can be peg-hooked or self standing.
Seachoice Trailer Coupler Ball - 590-1022 - 590-1022F1
Made of chrome plated steel. Complete with lock washer and nut. Packaging can be peg-hooked or self standing.
Shackle Bolt - - 590-1071F1
Zinc splined bolt that keeps bolt from rotating. Nut included. For use with spring shackles Models 1068, 1069, 1070.
Silicone Self-Fusing Tape 1" X 10', Black - 5069 - 590-5069F1
Ideal for almost any application requiring a waterproof seal. Center ridge line facilitates uniform application of tapeAn excellent insulator with high dielectric strength (400 volts per mil)Revolutionary alternative to heat shrink tubingBegins curing immediately-completely cures within 24 hoursForms a permanent moisture tight sealIdeal for high temperature applications (-65° F to +500° F)No adhesive residue upon removalSeamless self-fusing silicone tapeSalt water resistant
Spare Lug Nuts 1/2-20 (5 Per Pack) - 590-1067 - 590-1067F1
Replacement parts for commonly used trailer wheels.
Spare Wheel Bolts 1/2-20 (5 Per Pack) - 590-1066 - 590-1066F1
Replacement parts for commonly used trailer wheels.
Spring Shackle - 590-1068 - 590-1068F1
Made of 1/4" zinc plated steel. Punched to accept 9/16" splined shackle bolt Model 1071.
Spring Shackle - 590-1069 - 590-1069F1
Made of 1/4" zinc plated steel. Punched to accept 9/16" splined shackle bolt Model 1071.
Spring Shackle - 590-1070 - 590-1070F1
Made of 1/4" zinc plated steel. Punched to accept 9/16" splined shackle bolt Model 1071.
Submersible Identification Light Bar - 590-1169 - 590-1169F1
Meets the requirements of SAE/DOT/FMVSS/CMVSS standards when properly installed Meets Requirements for Over 80" Wide TrailersSealed, waterproofSurface mountPolycarbonate lens and housing, stainless steel baseSingle wire self grounding
Trailer Connector - 4 Pin - 590-1006 - 590-1006F1
For 6, 12 & 24 volt applications.4 Pole shrouded connector. Set consists of: one 12" color coded lead wire to trailer side and one 12" color coded lead wire to car side.
Trailer Connector - 4 Pin - 590-1008 - 590-1008F1
For 6, 12 & 24 volt applications. 4 Pole shrouded connector, trailer side. 12" color coded lead wire.
Trailer Connector - 4 Pin - 590-1009 - 590-1009F1
For 6, 12 & 24 volt applications.4 Pole square shrouded connector, trunk side. 48" color coded lead wire.
Trailer Coupler Ball - - 590-1018F1
Made of chrome plated steel. Complete with lock washer and nut. Packaging can be peg-hooked or self standing.
Trailer Hitch Lock - - 590-1014F1
Designed to fit in padlock hole of trailer coupler for trailer security. Solid brass body hasp. Heat treated lock is pick resistant. Pin diameter 1/4". Closed position 1-5/8".
Trailer Jack Replacement Wheel - 590-1034 - 590-1034F1
Black poly reinforced replacement wheel.Shaft size: 5/8 ID.
Trailer Jack Replacement Wheel - 590-1035 - 590-1035F1
Black poly reinforced replacement wheel.Shaft size: 5/8 ID.
Trailer Jack Stand Wheel Stop - Black - 590-1037 - 590-1037F1
Made of ABS plastic. Wheel stop prevents trailer from moving around or sinking in dirt or asphalt. Color: Black.
Trailer Safety Chain - 590-1015 - 590-1015F1
Zinc plated. Welded link chain with safety hooks.
Trailer Safety Chain - 590-1016 - 590-1016F1
Zinc plated. Welded link chain with safety hooks.
Trailer Wheel Bearing Kit - 590-1057 - 590-1057F1
Each Kit Contains: 2 bearings with races1 grease seal1 cotter pin
Trailer Wheel Bearing Kit - 590-1058 - 590-1058F1
Each Kit Contains: 2 bearings with races1 grease seal1 cotter pin
Trailer Wheel Bearing Kit - 590-1059 - 590-1059F1
Each Kit Contains: 2 bearings with races1 grease seal1 cotter pin
Trailer Wheel Bearing Kit - 590-1060 - 590-1060F1
Each Kit Contains: 2 bearings with races1 grease seal1 cotter pin
Trailer Wheel Bearing Kit - 590-1061 - 590-1061F1
Each Kit Contains: 2 bearings with races1 grease seal1 cotter pin
Trailer Wheel Bearing Kit - 590-1062 - 590-1062F1
Each Kit Contains: 2 bearings with races1 grease seal1 cotter pin
Trailer Wiring Mounting Bracket 4-Way - 590-2001 - 590-2001F1
Mounts wiring connectors to rear of tow vehicleConvenient "Push-In" connector mountingBlack powder coat finishContains mounting hardware
Trailer Wiring Mounting Bracket 5-Way - 590-2027 - 590-2027F1
Mounts wiring connectors to rear of tow vehicleConvenient "Push-In" connector mountingBlack powder coat finishContains mounting hardware
Universal Flex Wiper Blade 32 - 590-1225 - 590-1225F1
One piece frame design for even pressure distribution. All season spoiler also prevents wind lift at high speeds. 100% Natural compression molded rubber with graphite coating. Pre-installed adapter fits 9x3, 9x4 hook, bayonet, and pitch tab applications. Additional adapters included to fit Top Button and Side Pin applications.
Wheel Chock With Rope - 1170 - 590-1170F1
Keeps your vehicle in place so you can re-hitch safelyConstructed of durable hard plastic with UV inhibitorsIncludes rope for convenient placement and removal
