2-1/2" Lexan lens and housing sonic welded into a sealed unit for maximum service and protection. Requires a mounting grommet (#14218) and plug to complete installation.... More Details

2-1/2" Lexan lens and housing sonic welded into a sealed unit for maximum service and protection. Requires a mounting grommet (#14218) and plug to complete installation.... More Details

2-1/2" Lexan lens and housing sonic welded into a sealed unit for maximum service and protection. Requires a mounting grommet (#14218) and plug to complete installation.... More Details

Tester plugs into connector of tow vehicle and illuminates when the electrical connections are correct. Tests to SAE standards on flat 4-way functions for tail light, stop/turn lights, and ground.... More Details

Mounts on clean, flat surfaces using an industrial strength adhesive.... More Details

Perfect for aisle lighting and use in service bodies 36 diodes... More Details

Wishbone type. Four-conductor harness designed to split at trailer tongue and run down each side of trailer with flat 4-way plug. Provides for easier installation of side marker lights as well as elim... More Details

Sealed, oval back-up light meets DOT requirements in either horizontal or vertical position. Polycarbonate lens is sonic welded to housing to form single unit. Requires mounting grommet and 2-wire plu... More Details

High-brightness, red & white reflective material is rated at 1,000 candlepower and features industrial-strength adhesive to mount on flat or curved surfaces. It also offers: four-times greater reflect... More Details

High-brightness, red & white reflective material is rated at 1,000 candlepower and features industrial-strength adhesive to mount on flat or curved surfaces. It also offers: four-times greater reflect... More Details

Corrosion resistant ABS housings and rims with matte black finish. Precision cast, hardened glass lenses and vaporize aluminum coated reflectors.... More Details

Quick and easy to connect. Full-length plugs shall ensure positive latching; non-corrosive nylon shell and the insert eliminates make shift jumpers.... More Details

Quick and easy to connect. Full-length plugs shall ensure positive latching; non-corrosive nylon shell and the insert eliminates make shift jumpers.... More Details

May be used with the 416/421/420/423 series of oval lights and with other similar competitors' lights. Use in vertical or horizontal position. Black powder coat steel finish.... More Details

Sonic welded stud mount light provides clearance and side marker light functions. Unit has single 15" wire for electrical connection and grounds through mounting stud.... More Details

Replacement driver side lens.... More Details

Replacement passenger side lens.... More Details

Multi-function tail light exceeds DOT requirements for stop, turn, tail and rear reflector. Driver side includes license illuminator and license plate mounting bracket. High impact housing will never ... More Details

Multi-function tail light exceeds DOT requirements for stop, turn, tail and rear reflector. High impact housing will never corrode and tail light lens exceeds 12 sq. in. of luminous lens area. Grounds... More Details

Bright Piranha® 1-diode LED Black rubber grommet included8-16 volt operating range... More Details

Bright Piranha® 1-diode LED Black rubber grommet included8-16 volt operating range... More Details

16 Diode LED auxiliary light Includes bracket for surface mounting, or can be recess-mountedLow amp drawPerfect for aisle lighting... More Details

16 Diode LED auxiliary light Includes bracket for surface mounting, or can be recess-mountedLow amp drawPerfect for aisle lighting... More Details

Sealed 2-diode LED light that functions as clearance or side marker light. Operates from 8-16 volts. Hard-wired with separate lead and ground wires for mounting to all surfaces. Mounts on 1-15/16" cen... More Details

6-Diode, oval LED light perfect for light & medium duty applications Functions as a clearance or side maker light with built-in reflector optics.... More Details

6-Diode, oval LED light perfect for light & medium duty applications Functions as a clearance or side maker light with built-in reflector optics.... More Details

Sealed LED light that may be used as a clearance, side marker, or identification light. The lens is welded to the housing to form a single unit. Kit includes 153 LED light, mounting bracket, and plug.... More Details

Sealed LED light that may be used as a clearance, side marker, or identification light. The lens is welded to the housing to form a single unit. Kit includes 153 LED light, mounting bracket, and plug.... More Details

Sealed 2-diode LED light that functions as clearance or side marker light. Operates from 9-16 volts. Features 2-wire, hard-wired design. Ground wire includes #10 ring terminal. Mounts on 3" centers.... More Details

Sealed 2-diode LED light that functions as clearance or side marker light. Operates from 9-16 volts. Features 2-wire, hard-wired design. Ground wire includes #10 ring terminal. Mounts on 3" centers.... More Details

Sealed 2-diode LED light that functions as clearance or side marker light. Operates from 9-16 volts. Features 2-wire, hard-wired design. Ground wire includes #10 ring terminal.... More Details

Sealed 2-diode LED light that functions as clearance or side marker light. Operates from 9-16 volts. Features 2-wire, hard-wired design. Ground wire includes #10 ring terminal.... More Details

Sealed 2-diode LED light that functions as clearance or side marker light. Operates from 8-16 volts. Hard-wired with separate lead and ground wires for mounting to all surfaces. Mounts on 1-15/16" cen... More Details

Sealed 2-diode LED light that functions as clearance or side marker light. Operates from 8-16 volts. Hard-wired with separate lead and ground wires for mounting to all surfaces. Mounts on 1-15/16" cen... More Details

14 high-output Great White® diodes for bright illumination for interior applications. Operating range is 9-16 volts. Mounts on 2-3/16" centers with two hardwired leads.... More Details

Oval, 10-diode LED stop, turn and tail light designed for horizontal installation. Meets DOT requirements. Operates from 9-16 volts. Hard-wired design eliminates the need for separate plug and grommet... More Details

Combination LED stop, turn and tail light Super bright LED optics - no bulbs to break or burn out100,000-hour-rated lifeFully sealed, submersible constructionPotted circuitry protects against moisture... More Details

Combination LED stop, turn and tail light Super bright LED optics - no bulbs to break or burn out100,000-hour-rated lifeFully sealed, submersible constructionPotted circuitry protects against moisture... More Details

Submersible rear lighting kit for all trailers 80" wide and over Includes 856/856L LED tail lights plus license bracket, mounting hardware and Installation instructionsReplacement harness available se... More Details

Combination LED stop, turn and tail light. Exceeds all DOT rear lighting and reflex requirements for trailers less than 80" wide. It has solid state construction, no bulbs to break or burn out. 100,00... More Details

Combination LED stop, turn and tail light. Exceeds all DOT rear lighting and reflex requirements for trailers less than 80" wide. It has solid state construction, no bulbs to break or burn out. 100,00... More Details

Super bright LED optics. 100,000 hour rated life. Submersible - no bulb breakage. Low amp draw. Kit contains: two multi-function LED stop, turn and tail lights, license bracket, mounting and wiring ha... More Details

Acrylic lens features built-in reflector which eliminates the need for a separate reflector. Mounts on 3" centers with a single lead wire and grounds through the mounting hardware.... More Details

Acrylic lens features built-in reflector which eliminates the need for a separate reflector. Mounts on 3" centers with a single lead wire and grounds through the mounting hardware.... More Details

Bright Piranha® 1-diode LED Black rubber grommet included8-16 volt operating range... More Details

May be used on both the curbside and roadside of the trailer. Polycarbonate lens is sonic welded to the housing to form a single unit. Kit includes 12V lamp, grommet, and right angle plug.... More Details

May be used on both the curbside and roadside of the trailer. Polycarbonate lens is sonic welded to the housing to form a single unit. Kit includes 12V lamp, grommet, and right angle plug.... More Details

Low profile. Includes the following functions: stop, turn, tail, rear clearance, rear reflex, side marker, side reflex and license light. Housing slides out for easy maintenance and bulb replacement w... More Details

Low profile. Includes the following functions: stop, turn, tail, rear clearance, rear reflex, side marker, side reflex and license light. Housing slides out for easy maintenance and bulb replacement w... More Details

For all trailers over 80" wide. Kit provides all rear legal lighting and reflectors for trailers over 80" wide. Includes one each low profile 456/456L tail light, 25' trailer harness, 48" trunk connec... More Details

Gaskets on both rear and side lens. Grounds through mounting studs. Features include stop, turn, tail, rear clearance, rear & side reflex, side marker and license plate illuminator (L suffix only). Mo... More Details

Gaskets on both rear and side lens. Grounds through mounting studs. Features include stop, turn, tail, rear clearance, rear & side reflex, side marker and license plate illuminator (L suffix only). Mo... More Details

Kit includes one each 452/452L tail light, 25' trailer harness, 48" trunk connector, license bracket, mounting hardware, and installation instructions.... More Details

Functions as a side marker or clearance light; may be used as a combination light when mounted properly. Lens is welded to housing. Features a 15,000 long-life bulb.Kit includes 150 light, chassis mou... More Details

Acrylic lens features built-in reflector which eliminates the need for a separate reflector.... More Details

Acrylic lens features built-in reflector which eliminates the need for a separate reflector.... More Details

May be used as combination side marker and clearance light for over-80" application when properly mounted. Lens is sonic welded to housing to form single unit. Requires mounting grommet and 2-wire plu... More Details

May be used as combination side marker and clearance light for over-80" application when properly mounted. Lens is sonic welded to housing to form single unit. Requires mounting grommet and 2-wire plu... More Details

Harness extensions available in both 4-way and 5-way flat configurations. Each configuration has trailer connector on one end and trunk connector on other. Perfect for those times when an extension is... More Details

Lights exceed DOT requirements for stop, tail, turn signal, rear and side reflex, side marker light and license illuminator (L suffix only). E440L measures 4-1/2" x 5" x 2-7/8".... More Details

Lights exceed DOT requirements for stop, tail, turn signal, rear and side reflex, side marker light and license illuminator (L suffix only). E440L measures 4-1/2" x 5" x 2-7/8".... More Details

Features gasketed lens to prevent water from entering the light. Mounts on 2" center and includes mounting hardware. Grounds through 1/4" mounting studs. Exceeds DOT requirements for stop, turn, rear ... More Details

Features gasketed lens to prevent water from entering the light. Mounts on 2" center and includes mounting hardware. Grounds through 1/4" mounting studs. Exceeds DOT requirements for stop, turn, rear ... More Details

Kit includes one each of 441/441L tail light, two 108A side marker lights, 20' trailer harness, 48" truck connector, license bracket, mounting hardware and installation instructions. Black housing.... More Details

Kit provides all legal lighting and reflectors for trailers under 80" wide. Includes one each of the 440/400L tail lights, two 114A side marker lights, 20' trailer harness, 48" trunk connector, licens... More Details

Use as a 12 volt courtesy or step light for low level general illumination. Compact, low profile housing is chrome plated over molded ABS housing. Flush mounts on 2-11/16" centers with a separate grou... More Details

With integral reflex 15,000-hour-rated long-life single replaceable incandescent bulb... More Details

DOT compliant 2 diodes. PC Rated - functions as side marker or clearance light and may be used as a combination clearance and side marker when properly mounted. Recommended for marine trailer use.Moun... More Details

DOT compliant 2 diodes. PC Rated - functions as side marker or clearance light and may be used as a combination clearance and side marker when properly mounted. Recommended for marine trailer use.Moun... More Details

DOT compliant 2 diodes. PC Rated - functions as side marker or clearance light and may be used as a combination clearance and side marker when properly mounted. Recommended for marine trailer use.Moun... More Details

2 diodes Polycarbonate lens and base are welded together to form a single rugged unit.Side of 203C lens painted to meet license illuminator requirementsLED version of our popular 150 series light. Int... More Details

DOT compliant 2 diodes. PC Rated - functions as side marker or clearance light and may be used as a combination clearance and side marker when properly mounted. Recommended for marine trailer use.Moun... More Details

DOT compliant 2 diodes. PC Rated - functions as side marker or clearance light and may be used as a combination clearance and side marker when properly mounted. Recommended for marine trailer use.Moun... More Details

DOT compliant 2 diodes. PC Rated - functions as side marker or clearance light and may be used as a combination clearance and side marker when properly mounted. Recommended for marine trailer use.Moun... More Details

2 diodes With clear polycarbonate lens for utility use onlyInterchangeable with competitive unitsSurface Mount Kit includes 150-09 mounting bracket, gasket, and two screws.2.48" L x 1.2" W x 0.84" D... More Details

Integral Reflex DOT compliant. Popular for RV applicationsSurface mounts on 3" centers. 4 W x 2" H x 1" D."... More Details

Integral Reflex DOT compliant. Popular for RV applicationsSurface mounts on 3" centers. 4 W x 2" H x 1" D."... More Details

Integral Reflex DOT compliant. Popular for RV applicationsSurface mounts on 3" centers. 4 W x 2" H x 1" D."... More Details

Integral Reflex DOT compliant. Popular for RV applicationsSurface mounts on 3" centers. 4 W x 2" H x 1" D."... More Details

Red replacement lens for RV Stop/Turn/Tail light... More Details

Red replacement lens for RV Stop/Turn/Tail light... More Details

Red replacement lens for RV Stop/Turn/Tail light... More Details

Red replacement lens for RV Stop/Turn/Tail light... More Details

DOT compliant. Popular for RV applications. Not for marine use Integral ReflexSurface mount rear combination incandescent tail lightSurface mounts on 7.25" centers. 8.6"W x 4.6" H x2" D.... More Details

DOT compliant. Popular for RV applications. Not for marine use Integral Reflex... More Details

Rugged high impact plastic dome light with built-in switch, ideal for general interior illumination. Corrosion resistant, even the switch is plastic. Translucent white lens provides diffused light, sn... More Details

More Details

More Details

More Details

More Details

More Details

Designed to attach harness to the trailer frame. Minimum order quantity 100.... More Details

More Details

More Details

May be used on both the curbside and roadside of the trailer. Polycarbonate lens is sonic welded to the housing to form a single unit. Kit includes 12V lamp, grommet, and right angle plug.... More Details

More Details

More Details

More Details

A 7-diode, LED oval stop, turn and tail light suitable for over-80" vehicle width applications. It uses the industry-standard PL3 socket that is integrated into the housing. 9-16 volt operating range.... More Details

A 7-diode, LED oval stop, turn and tail light suitable for over-80" vehicle width applications. It uses the industry-standard PL3 socket that is integrated into the housing. 9-16 volt operating range.... More Details

Tough molded, flexible plastic material. Will not rust or corrode. Allows bracket and license plate to deflect on impact-returns to original position. Designed for use with all Anderson rear lights.... More Details

More Details

3" High universal mounting bracket for all stop and tail lights. Gusseted for rigidity. Extends 4-1/2" from mounting surface. Finish is black enameled steel.... More Details