More Details

Marine grade flexible white PVC, will not chip or crack under normal usage and is unaffected by gas, oil or saltwater. UV stabilizers prevent yellowing and deterioration. Stainless steel fasteners rec... More Details

More Details

More Details

More Details

Heavy duty air-filled bumper is constructed from marine grade PVC and features a built-in air valve for inflation or deflation if necessary. Includes UV inhibitors and fungicide.... More Details

More Details

More Details

Provides double the protection with two air-filled channels. Uses small corners, end plugs and connectors. Easily installed horizontally or vertically on any dock or boat house. Requires 2 End Plugs o... More Details

Ensures peace of mind for any runabout or personal watercraft owner. Install on any horizontal or vertical surface. 1-1/2" Protrusion x 3-1/8" Overall height.... More Details

Developed specifically for AIR CUSHION™ spot protection. Like having a fender mounted where its needed the most. Mount vertically or horizontally on docks or boat houses. Molded in UV inhibitors and f... More Details

Seal Air Cushion Profile ends. Use with DockEdge+ Connectors, Corners and PVC solvent for Air Cushion System.... More Details

Seal Air Cushion Profile ends. Use with DockEdge+ Connectors, Corners and PVC solvent for Air Cushion System.... More Details

Connect Air Cushion™ profiles. Use wth DockEdge+ End Plugs, Corners and PVC solvent for Air Cushion System.... More Details

Connect Air Cushion Profiles at any outside 90° angle corner. Use with DockEdge+ Connectors, End Plugs and PVC solvent for Air Cushion System.... More Details

Connect Air Cushion Profiles at any outside 90° angle corner. Use with DockEdge+ Connectors, End Plugs and PVC solvent for Air Cushion System.... More Details

Ideal for cementing all corners, end plugs and connectors to Air Cushion profiles to create the Air Cushion system. May be subject to shipping restrictions.... More Details

For use with Single "P" profiles only. Use with DockEdge+ Connectors, End Plugs and PVC solvent for Air Cushion System.... More Details

Heavy-duty. Ideal for larger applications. Double internal channels with cross girder adds additional protection. Easy to install. 4-1/2" Overall height. Highly durable double internal channels and cr... More Details

Slant "P" Dock Bumper Profile is extruded with flexible PVC material that is excellent for use on all docks. 3 x 8' sections totaling 24', with a mounting line, easy to mount. Slanted face is designed... More Details

Extruded with flexible PVC material, designed to be used to trap air and act as an air cushion. Excellent for use on all docks. 3 x 8' sections totaling 24', easy to mount. 1-1/2" Protrusion (2-1/4" O... More Details

Economy "C" Shape co-extruded profile is made of marine grade PVC with UV inhibitors to exacting standards. It will not crack or distort with temperature extremes. It can be used on flat surfaces as w... More Details

Economy "C" Shape co-extruded profile is made of marine grade PVC with UV inhibitors to exacting standards. It will not crack or distort with temperature extremes. It can be used on flat surfaces as w... More Details

The economy Dock Guard co-extruded profile can be used in light to medium duty applications. It features a raised lip for gunwale protection on ski and bass boats.... More Details

The ultimate in protection systems. No need for fenders any more! This revolutionary design incorporates a soft expanded foam core surrounded by U.V. stabilized integral polyurethane skin foam. This c... More Details

The ultimate in protection systems. No need for fenders any more! This revolutionary design incorporates a soft expanded foam core surrounded by U.V. stabilized integral polyurethane skin foam. This c... More Details

The ultimate in protection systems. No need for fenders any more! This revolutionary design incorporates a soft expanded foam core surrounded by U.V. stabilized integral polyurethane skin foam. This c... More Details

Heavy-duty. Ideal for larger applications. Double internal channels with cross girder adds additional protection. Easy to install. 4-1/2" Overall height. Highly durable double internal channels and cr... More Details

Tough and durable, this roto-molded ladder swings up and out of the way, locking in place when not in use. The Stand Off roto-molded ladder extends into the water at a 60 degree angle to make getting ... More Details

Injection molded high density polyethylene and U.V. stabilized.... More Details

Injection molded high density polyethylene and U.V. stabilized.... More Details

Sand blasted to give a clean grey matte finish. Each cleat is designed with an extra wide footprint for added strength. As well, each cleat has an enlarged counter-sunk hole for easy installation with... More Details

Cast from Almag and powder coated to last. Distinctive and highly functional, they are available to suit any requirement.... More Details

Traditional hot-dip galvanized dock cleats. Recessed mounting holes with a hexagonal shape to stop the head of a carriage bolt from turning while securing the cleat to a surface.... More Details

Traditional hot-dip galvanized dock cleats. Recessed mounting holes with a hexagonal shape to stop the head of a carriage bolt from turning while securing the cleat to a surface.... More Details

Featuring specially reinforced heavy-duty integral lugs for added strength and longer durability. These fenders provide maximum protection and value for your dollar.... More Details

Bumpers are manufactured from roto-molded marine grade PVC with UV inhibitors and fungicides. Will not chip or fade and features molded in ribs for strength and angled ends to deflect craft. Provides ... More Details

Bumpers are manufactured from roto-molded marine grade PVC with UV inhibitors and fungicides. Will not chip or fade and features molded in ribs for strength and angled ends to deflect craft. Provides ... More Details

Includes all mounting hardware required to securely attach Dock 2 Go modular dock sections together. Kit includes 2 Male T connectors, 2 Female T connectors, 2 connector Pins and 4 Backer Plates. 4 Ga... More Details

For floating dock applications where an outside corner is not necessary. Includes 4 heavy duty inside corners and 4 backer plates. Requires 32 x 2-1/2" x 1/2" carriage bolts, lock washer and nuts (not... More Details

For stationary dock applications where an outside corner is not necessary. Includes 4 heavy duty inside corners and 4 backer plates. Requires 32 x 2-1/2" x 3/8" carriage bolts, lock washer and nuts (n... More Details

Securely mount side legs to the inside or outside of the dock frame without deforming wood causing bolt loosening and dock shifting. Kit includes 2 side leg holders and 4 backer plates. 11 Gauge 1/8" ... More Details

Designed and engineered for safety and stabilityTIG welded aluminum frame (alloy 6005/6061)Aluminum hardwareGalvanized steel posts 1-11/16" (42.9mm) diameterProtective post capsStainless steel (304) n... More Details

Used to connect Hybrid Dock Kit sections together Strong aluminum constructionRubber insert to alleviate hinge noiseEasily installs on aluminum frame... More Details

Used as a footing. May be bolted to a 2" x 6" piece of lumber and joined to an adjacent base plate for stability.... More Details

Used to join dock sections or a fixed ramp to the dock at varying angles. Includes hinge pin.... More Details

32" wide support arms fits 2 kayaks, canoes, pdl, surf boards, etc. Adjustable locking straps, with locking hook at one endSupports many times the weight of an average kayak2' spacing lower rackTop ra... More Details

Polyethylene and filled with closed cellular foam for long life under the most extreme marine conditions. Resistant to fire, oil and gas. Molded in UV Inhibitors and Fungicides.... More Details

All DockEdge heavy duty floating dock hardware is 5 gauge (1/4" nominal). Hot dip galvanized steel with 9/16" hole. Engineered for use with Howell™ and DockEdge dock floats.... More Details

Use to cover raw leg pipe edges. Gives dock the finishing touch. 4-Pack.... More Details

Used to help secure the dock in place. May also replace Corner Plate when extra strength is required.... More Details

Made of heavy duty fiberglass, these strong flexible bows will hold up even the heaviest boat covers and prevent pools of water from forming. Easy to cut if a custom fit is desired. 2-Piece slats are ... More Details

Made of heavy duty fiberglass, these strong flexible bows will hold up even the heaviest boat covers and prevent pools of water from forming. Easy to cut if a custom fit is desired. 2-Piece slats are ... More Details

For lighter duty applications where an outside corner is not necessary.... More Details

Use as inside corner. Adds extra strength with its' anchor chain bar. Accepts chain up to 1/2".... More Details

All stationary dock hardware is 1/8" hot-dip galvanized steel.7/16" holes for 3/8" carriage bolts.All bolts included are stainless steel. Bottom Pad: Large surface area is used in soft bottom areas. L... More Details

Ideal for docks, decks, walkways & driveway or slip entriesDesigned for salt or fresh water useUp to 12 hour run timeBright white LED with 360° illuminationPowerful solar charging performanceInstalls ... More Details

Dolphin Fender Covers feature a stretch polyester fabric which is antimicrobrial and will not fade, mold, mildew or rot. An elastic top and bottom and included Velcro straps ensure the covers will nev... More Details

Not only attractive, but also adds value and function to your dock or deck. Incorporates stylish, durable solar lighting in an attractive colonial housing. Conveniently mounts to conventional 4" x 4" ... More Details

These advanced solar lights are built for 10,000 on/off cycles to provide a long and useful life. A capacitor stores solar energy and recharges the battery if needed. On days with insufficient sunligh... More Details

Maximum corner strength when used with 99004F Outside Corner or any Corner Connecting Hinge. Accepts chain up to 1/2".... More Details

Use with backer plates or inside corners at outside ends of docks, fingers and swim platforms. Use with backer plates or inside corners at outside ends of dock.... More Details

Washer Plate... More Details

Can be used with all styles of Female Connector Hinges.... More Details

Can be used with all styles of Male Corner Hinge.... More Details

Can be used with all styles of Male Connector Hinges.... More Details

Holds chain up to 1/2" to secure the dock in place.... More Details

Like all DockEdge+ Profiles, these Premium profiles are specifically constructed to be flexible so that they may be mounted vertically or horizontally on rounded or flat surfaces. This makes these pro... More Details

This extruded U.V. stabilized polyethylene foam bumper with UV inhibitors is contoured at the back so it can be mounted both horizontally on your dock or vertically on pilings. The beveled edge helps ... More Details

These ladders will make a durable and attractive addition to your dock, seawall or any marine application. Heavy 1-1/2" tubing ensures a positive grip and stainless steel hardware is includedRail heig... More Details

Available in Bright White polyester finished Galvalume or brushed stainless steel, these ladders are durable and attractive. Hinged design allows the ladder to flip up and out of the water when not in... More Details

Solar light is mounted on top of a sturdy galvanized steel base, housed inside an attractive, Colonial style vinyl pillar. Easy to install and no wires. Will add style to your dock day or night. The l... More Details

Heavy duty air-filled bumper is constructed from marine grade PVC and features a built-in air valve for inflation or deflation if necessary. Includes UV inhibitors and fungicide.... More Details

Easily installed on any horizontal or vertical surface. Large "P" section with large air volume provides excellent protection. 2-1/2" Protrusion (4" Overall w/top tab) x 3-3/4" Overall height.... More Details

Developed specifically for AIR CUSHION™ spot protection. Like having a fender mounted where its needed the most. Mount vertically or horizontally on docks or boat houses. Molded in UV inhibitors and f... More Details

Stainless steel will prevent unsightly staining caused by rusting of regular steel fasteners. Oversized head eliminates need for washers. Recommended for use with all profiles. Comes with square head ... More Details

This extruded U.V. stabilized polyethylene foam bumper with UV inhibitors is contoured at the back so it can be mounted both horizontally on your dock or vertically on pilings. The beveled edge helps ... More Details

This bumper is manufactured from the same quality marine grade vinyl material as Dolphin Boat fenders and offers the ultimate in cushioning from impacts to your boat. Molded in ribs on the interior of... More Details

These heavy duty bumpers are manufactured from PVC with UV Inhibitors and Fungicides, have excellent shock absorption qualities and will not mark or mar the hull of your boat. The Protect™ bumpers als... More Details

Like all DockEdge+ Profiles, these Premium profiles are specifically constructed to be flexible so that they may be mounted vertically or horizontally on rounded or flat surfaces. This makes these pro... More Details

Like all DockEdge+ Profiles, these Premium profiles are specifically constructed to be flexible so that they may be mounted vertically or horizontally on rounded or flat surfaces. This makes these pro... More Details

Constructed of marine grade flexible PVC, resists chipping and cracking under normal use. Resistant to oil, gas and salt water. UV inhibitors prevent fading, sunlight degradation, blotching. Fungicide... More Details

Heavy duty air-filled bumper is constructed from marine grade PVC and features a built-in air valve for inflation or deflation if necessary. Includes UV inhibitors and fungicide.... More Details

Heavy duty air-filled bumper is constructed from marine grade PVC and features a built-in air valve for inflation or deflation if necessary. Includes UV inhibitors and fungicide.... More Details

These heavy duty bumpers are manufactured from PVC with UV Inhibitors and Fungicides, have excellent shock absorption qualities and will not mark or mar the hull of your boat. The Protect™ bumpers als... More Details

These heavy duty bumpers are manufactured from PVC with UV Inhibitors and Fungicides, have excellent shock absorption qualities and will not mark or mar the hull of your boat. The Protect™ bumpers als... More Details

Rugged, air filled heavy wall molded PVC & integral inflation valve constructionThe ultimate in heavy impact protectionAngled ends to deflect craftCan be used in pairs to form inside cornersExcellent ... More Details

Rugged, air filled heavy wall molded PVC & integral inflation valve constructionThe ultimate in heavy impact protectionAngled ends to deflect craftCan be used in pairs to form inside cornersExcellent ... More Details

Rugged, air filled heavy wall molded PVC & integral inflation valve constructionThe ultimate in heavy impact protectionAngled ends to deflect craftCan be used in pairs to form inside cornersExcellent ... More Details

Heavy-duty. Ideal for larger applications. Double internal channels with cross girder adds additional protection. Easy to install. 4-1/2" Overall height. Highly durable double internal channels and cr... More Details

Slant "P" Dock Bumper Profile is extruded with flexible PVC material that is excellent for use on all docks. 3 x 8' sections totaling 24', with a mounting line, easy to mount. Slanted face is designed... More Details

Economy "C" Shape co-extruded profile is made of marine grade PVC with UV inhibitors to exacting standards. It will not crack or distort with temperature extremes. It can be used on flat surfaces as w... More Details

The economy Dock Guard co-extruded profile can be used in light to medium duty applications. It features a raised lip for gunwale protection on ski and bass boats.... More Details

The ultimate in protection systems. No need for fenders any more! This revolutionary design incorporates a soft expanded foam core surrounded by U.V. stabilized integral polyurethane skin foam. This c... More Details

The ultimate in protection systems. No need for fenders any more! This revolutionary design incorporates a soft expanded foam core surrounded by U.V. stabilized integral polyurethane skin foam. This c... More Details

The ultimate in protection systems. No need for fenders any more! This revolutionary design incorporates a soft expanded foam core surrounded by U.V. stabilized integral polyurethane skin foam. This c... More Details