Anderson
Zinc plated steel slotted for universal mounting.... More Details
Stud mount. Grounds through mounting stud. Single wire for electrical connection. Features 15,000 hour long-life bulb.... More Details
Stud mount. Grounds through mounting stud. Single wire for electrical connection. Features 15,000 hour long-life bulb.... More Details
Gaskets on both rear and side lens. Grounds through mounting studs. Features include stop, turn, tail, rear clearance, rear & side reflex, side marker and license plate illuminator (L suffix only). Mo... More Details
Fits old style 114R, 11/R, 440/L & 441/L.... More Details
Fits old style 114A, 115A... More Details
Includes amber side marker and side reflex for use as an under-80" front side marker and side reflex light. Surface mounts on 3" centers and grounds through the mounting hardware. Single wire for elec... More Details
Lights exceed DOT requirements for stop, tail, turn signal, rear and side reflex, side marker light and license illuminator (L suffix only). E440L measures 4-1/2" x 5" x 2-7/8".... More Details
Mounts on clean, flat surfaces using an industrial strength adhesive.... More Details
May be used on both the curbside and roadside of the trailer. Polycarbonate lens is sonic welded to the housing to form a single unit. Kit includes 12V lamp, grommet, and right angle plug.... More Details
3-diode, round, sealed LED light functions as clearance, side marker or identification light Accepts industry standard 2-prong plugIncludes LED light, 142-18 mounting grommet and 162-49 plugProudly ma... More Details
3-diode, round, sealed LED light functions as clearance, side marker or identification light Accepts industry standard 2-prong plugIncludes LED light, 142-18 mounting grommet and 162-49 plugProudly ma... More Details
3-diode, round, sealed LED light functions as clearance, side marker or identification light Accepts industry standard 2-prong plugIncludes LED light, 142-18 mounting grommet and 162-49 plugProudly ma... More Details
3-diode, round, sealed LED light functions as clearance, side marker or identification light Accepts industry standard 2-prong plugIncludes LED light, 142-18 mounting grommet and 162-49 plugProudly ma... More Details
Quick and easy to connect. Full-length plugs shall ensure positive latching; non-corrosive nylon shell and the insert eliminates make shift jumpers.... More Details
13" single-section, rubber-mast antennas fit most vehiclesAvailable in either top or side mount, or combination of bothFeatures flexible mast, swivel base, and 54" cable... More Details
13" single-section, rubber-mast antennas fit most vehicles Available in either top or side mount, or combination of bothFeatures flexible mast, swivel base, and 54" cable... More Details
3" High universal mounting bracket for all stop and tail lights. Gusseted for rigidity. Extends 4-1/2" from mounting surface. Finish is black enameled steel.... More Details
Tough molded, flexible plastic material. Will not rust or corrode. Allows bracket and license plate to deflect on impact-returns to original position. Designed for use with all Anderson rear lights.... More Details
A 7-diode, LED oval stop, turn and tail light suitable for over-80" vehicle width applications. It uses the industry-standard PL3 socket that is integrated into the housing. 9-16 volt operating range.... More Details
A 7-diode, LED oval stop, turn and tail light suitable for over-80" vehicle width applications. It uses the industry-standard PL3 socket that is integrated into the housing. 9-16 volt operating range.... More Details
May be used on both the curbside and roadside of the trailer. Polycarbonate lens is sonic welded to the housing to form a single unit. Kit includes 12V lamp, grommet, and right angle plug.... More Details
Designed to attach harness to the trailer frame. Minimum order quantity 100.... More Details
Rugged high impact plastic dome light with built-in switch, ideal for general interior illumination. Corrosion resistant, even the switch is plastic. Translucent white lens provides diffused light, sn... More Details
Anderson V25923 25921/25923 Rv Stop, Turn, And Tail Light W/Reflex, Driver Side W/License Plate Light & Bracket - V25923 - 177-V25923F1
Anderson
$29.06
DOT compliant. Popular for RV applications. Not for marine use Integral Reflex... More Details
Anderson V25921 25921/25923 Rv Stop, Turn, And Tail Light W/Reflex, Passenger Side - V25921 - 177-V25921F1
Anderson
$27.54
DOT compliant. Popular for RV applications. Not for marine use Integral ReflexSurface mount rear combination incandescent tail lightSurface mounts on 7.25" centers. 8.6"W x 4.6" H x2" D.... More Details
Anderson V2591425 Rv Stop/Turn/Tail Light Replacement Lens, Red - V25914-25 - 177-V2591425F1
Anderson
$15.57
Red replacement lens for RV Stop/Turn/Tail light... More Details
Anderson V2591325 Rv Stop/Turn/Tail Light Replacement Lens, Red - V25913-25 - 177-V2591325F1
Anderson
$13.67
Red replacement lens for RV Stop/Turn/Tail light... More Details
Anderson V2591225 Rv Stop/Turn/Tail Light Replacement Lens, Red - V25912-25 - 177-V2591225F1
Anderson
$15.48
Red replacement lens for RV Stop/Turn/Tail light... More Details
Anderson V2591125 Rv Stop/Turn/Tail Light Replacement Lens, Red - V25911-25 - 177-V2591125F1
Anderson
$13.10
Red replacement lens for RV Stop/Turn/Tail light... More Details
Integral Reflex DOT compliant. Popular for RV applicationsSurface mounts on 3" centers. 4 W x 2" H x 1" D."... More Details
Integral Reflex DOT compliant. Popular for RV applicationsSurface mounts on 3" centers. 4 W x 2" H x 1" D."... More Details
Integral Reflex DOT compliant. Popular for RV applicationsSurface mounts on 3" centers. 4 W x 2" H x 1" D."... More Details
Integral Reflex DOT compliant. Popular for RV applicationsSurface mounts on 3" centers. 4 W x 2" H x 1" D."... More Details
2 diodes With clear polycarbonate lens for utility use onlyInterchangeable with competitive unitsSurface Mount Kit includes 150-09 mounting bracket, gasket, and two screws.2.48" L x 1.2" W x 0.84" D... More Details
Anderson V203R Led Clearance / Side Marker Light Module Only, Red - V203R - 177-V203Rf1
Anderson
$9.89
DOT compliant 2 diodes. PC Rated - functions as side marker or clearance light and may be used as a combination clearance and side marker when properly mounted. Recommended for marine trailer use.Moun... More Details
Anderson V203Kr Led Sealed Clearance/ Side Marker Light Assembly W/Black Bracket, Red - V203Kr - 177-V203Krf1
Anderson
$21.64
DOT compliant 2 diodes. PC Rated - functions as side marker or clearance light and may be used as a combination clearance and side marker when properly mounted. Recommended for marine trailer use.Moun... More Details
Anderson V203Ka Led Sealed Clearance/ Side Marker Light Assembly W/Black Bracket, Amber - V203Ka - 177-V203Kaf1
Anderson
$21.64
DOT compliant 2 diodes. PC Rated - functions as side marker or clearance light and may be used as a combination clearance and side marker when properly mounted. Recommended for marine trailer use.Moun... More Details
2 diodes Polycarbonate lens and base are welded together to form a single rugged unit.Side of 203C lens painted to meet license illuminator requirementsLED version of our popular 150 series light. Int... More Details
Anderson V203Bkr Led Sealed Clearance/ Side Marker Light Assembly W/Chrome Bracket, Red - V203Bkr - 177-V203Bkrf1
Anderson
$25.75
DOT compliant 2 diodes. PC Rated - functions as side marker or clearance light and may be used as a combination clearance and side marker when properly mounted. Recommended for marine trailer use.Moun... More Details
Anderson V203Bka Led Sealed Clearance/ Side Marker Light Assembly W/Chrome Bracket, Amber - V203Bka - 177-V203Bkaf1
Anderson
$25.75
DOT compliant 2 diodes. PC Rated - functions as side marker or clearance light and may be used as a combination clearance and side marker when properly mounted. Recommended for marine trailer use.Moun... More Details
Anderson V203A Led Clearance / Side Marker Light Module Only, Amber - V203A - 177-V203Af1
Anderson
$9.89
DOT compliant 2 diodes. PC Rated - functions as side marker or clearance light and may be used as a combination clearance and side marker when properly mounted. Recommended for marine trailer use.Moun... More Details
With integral reflex 15,000-hour-rated long-life single replaceable incandescent bulb... More Details
Anderson Utility/Courtesy Light Clear With Chrome-Plated Abs Housing - E126C - 177-E126Cf1
Anderson
$17.00
Use as a 12 volt courtesy or step light for low level general illumination. Compact, low profile housing is chrome plated over molded ABS housing. Flush mounts on 2-11/16" centers with a separate grou... More Details
Kit provides all legal lighting and reflectors for trailers under 80" wide. Includes one each of the 440/400L tail lights, two 114A side marker lights, 20' trailer harness, 48" trunk connector, licens... More Details
Kit includes one each of 441/441L tail light, two 108A side marker lights, 20' trailer harness, 48" truck connector, license bracket, mounting hardware and installation instructions. Black housing.... More Details
Features gasketed lens to prevent water from entering the light. Mounts on 2" center and includes mounting hardware. Grounds through 1/4" mounting studs. Exceeds DOT requirements for stop, turn, rear ... More Details
Features gasketed lens to prevent water from entering the light. Mounts on 2" center and includes mounting hardware. Grounds through 1/4" mounting studs. Exceeds DOT requirements for stop, turn, rear ... More Details
Lights exceed DOT requirements for stop, tail, turn signal, rear and side reflex, side marker light and license illuminator (L suffix only). E440L measures 4-1/2" x 5" x 2-7/8".... More Details
Lights exceed DOT requirements for stop, tail, turn signal, rear and side reflex, side marker light and license illuminator (L suffix only). E440L measures 4-1/2" x 5" x 2-7/8".... More Details
Harness extensions available in both 4-way and 5-way flat configurations. Each configuration has trailer connector on one end and trunk connector on other. Perfect for those times when an extension is... More Details
May be used as combination side marker and clearance light for over-80" application when properly mounted. Lens is sonic welded to housing to form single unit. Requires mounting grommet and 2-wire plu... More Details
May be used as combination side marker and clearance light for over-80" application when properly mounted. Lens is sonic welded to housing to form single unit. Requires mounting grommet and 2-wire plu... More Details
Anderson Replacement Oval Combination Clearance/Side Marker Light Replacement Lens, Red - 108-15R - 177-10815Rf1
Anderson
$4.17
Acrylic lens features built-in reflector which eliminates the need for a separate reflector.... More Details
Anderson Replacement Oval Combination Clearance/Side Marker Light Replacement Lens, Amber - 108-15A - 177-10815Af1
Anderson
$4.17
Acrylic lens features built-in reflector which eliminates the need for a separate reflector.... More Details
Anderson Pc-Rated Clearance/Side Marker Light Kit With Black Bracket - E150Bkr - 177-E150Bkr Superseded By: 177-V203Bkrf1
Anderson
$17.38
Functions as a side marker or clearance light; may be used as a combination light when mounted properly. Lens is welded to housing. Features a 15,000 long-life bulb.Kit includes 150 light, chassis mou... More Details
Kit includes one each 452/452L tail light, 25' trailer harness, 48" trunk connector, license bracket, mounting hardware, and installation instructions.... More Details
Gaskets on both rear and side lens. Grounds through mounting studs. Features include stop, turn, tail, rear clearance, rear & side reflex, side marker and license plate illuminator (L suffix only). Mo... More Details
Gaskets on both rear and side lens. Grounds through mounting studs. Features include stop, turn, tail, rear clearance, rear & side reflex, side marker and license plate illuminator (L suffix only). Mo... More Details
For all trailers over 80" wide. Kit provides all rear legal lighting and reflectors for trailers over 80" wide. Includes one each low profile 456/456L tail light, 25' trailer harness, 48" trunk connec... More Details
Low profile. Includes the following functions: stop, turn, tail, rear clearance, rear reflex, side marker, side reflex and license light. Housing slides out for easy maintenance and bulb replacement w... More Details
Low profile. Includes the following functions: stop, turn, tail, rear clearance, rear reflex, side marker, side reflex and license light. Housing slides out for easy maintenance and bulb replacement w... More Details
May be used on both the curbside and roadside of the trailer. Polycarbonate lens is sonic welded to the housing to form a single unit. Kit includes 12V lamp, grommet, and right angle plug.... More Details
May be used on both the curbside and roadside of the trailer. Polycarbonate lens is sonic welded to the housing to form a single unit. Kit includes 12V lamp, grommet, and right angle plug.... More Details
Bright Piranha® 1-diode LED Black rubber grommet included8-16 volt operating range... More Details
Acrylic lens features built-in reflector which eliminates the need for a separate reflector. Mounts on 3" centers with a single lead wire and grounds through the mounting hardware.... More Details
Acrylic lens features built-in reflector which eliminates the need for a separate reflector. Mounts on 3" centers with a single lead wire and grounds through the mounting hardware.... More Details
Super bright LED optics. 100,000 hour rated life. Submersible - no bulb breakage. Low amp draw. Kit contains: two multi-function LED stop, turn and tail lights, license bracket, mounting and wiring ha... More Details
Combination LED stop, turn and tail light. Exceeds all DOT rear lighting and reflex requirements for trailers less than 80" wide. It has solid state construction, no bulbs to break or burn out. 100,00... More Details
Combination LED stop, turn and tail light. Exceeds all DOT rear lighting and reflex requirements for trailers less than 80" wide. It has solid state construction, no bulbs to break or burn out. 100,00... More Details
Submersible rear lighting kit for all trailers 80" wide and over Includes 856/856L LED tail lights plus license bracket, mounting hardware and Installation instructionsReplacement harness available se... More Details
Combination LED stop, turn and tail light Super bright LED optics - no bulbs to break or burn out100,000-hour-rated lifeFully sealed, submersible constructionPotted circuitry protects against moisture... More Details
Combination LED stop, turn and tail light Super bright LED optics - no bulbs to break or burn out100,000-hour-rated lifeFully sealed, submersible constructionPotted circuitry protects against moisture... More Details
Anderson Led Oval Stop Turn & Tail Light Red With Chrome Bezel - V423Xr-4 - 177-V423Xr4F1
Anderson
$47.36
Oval, 10-diode LED stop, turn and tail light designed for horizontal installation. Meets DOT requirements. Operates from 9-16 volts. Hard-wired design eliminates the need for separate plug and grommet... More Details
14 high-output Great White® diodes for bright illumination for interior applications. Operating range is 9-16 volts. Mounts on 2-3/16" centers with two hardwired leads.... More Details
Anderson Led Clearance/Side Marker Light Kit With Chrome Bezel - V168Xr - 177-V168Xrf1
Anderson
$17.00
Sealed 2-diode LED light that functions as clearance or side marker light. Operates from 8-16 volts. Hard-wired with separate lead and ground wires for mounting to all surfaces. Mounts on 1-15/16" cen... More Details
