Sea-Dog Line
Heavy Duty Zinc Plated Steel Clamp-On Oar Lock, Pair, 1/2" Shaft - 582070-1 - 354-5820701F1
Heavy Duty Clamp-On Oarlocks are easy to install. The bolted clamp is adjustable to fit most standard oars. Straight 2" long shank. Recommended for freshwater use. Constructed of heavy gauge zinc plated steel.
Heavy Battery Box Strap - 415082-1 - 354-4150821F1
Heavy Duty Battery Box Strap includes a woven polypropylene strap, stainless steel buckle, two chrome plated brass brackets, and four #8 FH fasteners.
Hatch Latch - 321000-1 - 354-3210001F1
Hatch Latches are constructed of corrosion resistant stamped 304 stainless steel. Simple screw-in action holds hatch securely in closed position. Installs with four #10 RH fasteners (not included).
Halogen Floodlight With - 405115-1 - 354-4051151F1
This marine grade Halogen Flood Light features a fiberglass reinforced injection molded housing for strength and UV resistance, a solid glass lens, and a corrosion resistant stamped 304 stainless steel mounting bracket. H3 style 12V 55W halogen bulb.
Gas Tank 1" X 6' Strap, 304 Stainless Steel Hardware - 359995-1 - 354-3599951F1
For use in securing a portable gas tank. Gas Tank Strap kit includes: 1" x 6' nylon webbing strap with 304 stainless steel buckle, two 304 stainless steel footman's loops, and four #10 FH fasteners.
Garboard Drain Plug - 520042-1 - 354-5200421F1
Die cast bronze Garboard Drain & Plug provides drainage for bilge during haul-out. 1/2" NPT tapered thread plug provides a watertight seal with 2" diameter flange. Plug has a square T-top for manual tightening or removal. Installs with three #10 FH fasteners (not included).
Galvanized Coupler Locking Pin - 751011-1 - 354-7510111F1
Square Coupler Pins add an additional level of security, preventing accidental uncoupling while in transit to better protect your trailer. The snap lock bale is spring tensioned for stronger holding power. Fits most coupler sizes. Constructed of electro-galvanized steel for corrosion resistance.
Galvanized Coupler Locking Pin - 751010-1 - 354-7510101F1
Square Coupler Pins add an additional level of security, preventing accidental uncoupling while in transit to better protect your trailer. The snap lock bale is spring tensioned for stronger holding power. Fits most coupler sizes. Constructed of electro-galvanized steel for corrosion resistance.
Galvanized Cleat, 8" - 40108 - 354-040108F1
Made from corrosion resistant hot dipped, galvanized iron. Rugged construction ideal for docks, piers and workboats. The large open base is designed to handle multiple dock lines and distribute loads with ease. Cleats have recessed sockets for FH bolts. Fasteners sold separately.
Galvanized Cleat, 8" - 040108-1 - 354-0401081F1
Made from corrosion resistant hot dipped, galvanized iron. Rugged construction ideal for docks, piers and workboats. The large open base is designed to handle multiple dock lines and distribute loads with ease. Cleats have recessed sockets for FH bolts. Fasteners sold separately.
Galvanized Cleat, 6" - 40106 - 354-040106F1
Made from corrosion resistant hot dipped, galvanized iron. Rugged construction ideal for docks, piers and workboats. The large open base is designed to handle multiple dock lines and distribute loads with ease. Cleats have recessed sockets for FH bolts. Fasteners sold separately.
Galvanized Cleat, 6" - 040106-1 - 354-0401061F1
Made from corrosion resistant hot dipped, galvanized iron. Rugged construction ideal for docks, piers and workboats. The large open base is designed to handle multiple dock lines and distribute loads with ease. Cleats have recessed sockets for FH bolts. Fasteners sold separately.
Galvanized Cleat, 5" - 40105 - 354-040105F1
Made from corrosion resistant hot dipped, galvanized iron. Rugged construction ideal for docks, piers and workboats. The large open base is designed to handle multiple dock lines and distribute loads with ease. Cleats have recessed sockets for FH bolts. Fasteners sold separately.
Galvanized Cleat, 4" - 40104 - 354-040104F1
Made from corrosion resistant hot dipped, galvanized iron. Rugged construction ideal for docks, piers and workboats. The large open base is designed to handle multiple dock lines and distribute loads with ease. Cleats have recessed sockets for FH bolts. Fasteners sold separately.
Galvanized Cleat, 3-1/2" - 40103 - 354-040103F1
Made from corrosion resistant hot dipped, galvanized iron. Rugged construction ideal for docks, piers and workboats. The large open base is designed to handle multiple dock lines and distribute loads with ease. Cleats have recessed sockets for FH bolts. Fasteners sold separately.
Galvanized Cleat, 14" - 40114 - 354-040114F1
Made from corrosion resistant hot dipped, galvanized iron. Rugged construction ideal for docks, piers and workboats. The large open base is designed to handle multiple dock lines and distribute loads with ease. Cleats have recessed sockets for FH bolts. Fasteners sold separately.
Galvanized Cleat, 12" - 40112 - 354-040112F1
Made from corrosion resistant hot dipped, galvanized iron. Rugged construction ideal for docks, piers and workboats. The large open base is designed to handle multiple dock lines and distribute loads with ease. Cleats have recessed sockets for FH bolts. Fasteners sold separately.
Galvanized Cleat, 10" - 40110 - 354-040110F1
Made from corrosion resistant hot dipped, galvanized iron. Rugged construction ideal for docks, piers and workboats. The large open base is designed to handle multiple dock lines and distribute loads with ease. Cleats have recessed sockets for FH bolts. Fasteners sold separately.
Galvanized Anchor Shackle-5/16" - 147808-1 - 354-1478081F1
With their rounded shape bow shackles are designed to handle many different types of load from any direction. Constructed of hot dip galvanized drop forged steel these shackles feature a screw pin closure and are ideal for joining anchors to mooring chain.
Galvanized Anchor Shackle-5/16 - 147808 - 354-147808F1
With their rounded shape bow shackles are designed to handle many different types of load from any direction. Constructed of hot dip galvanized drop forged steel these shackles feature a screw pin closure and are ideal for joining anchors to mooring chain.
Galvanized Anchor Shackle-3/8" - 147810-1 - 354-1478101F1
With their rounded shape bow shackles are designed to handle many different types of load from any direction. Constructed of hot dip galvanized drop forged steel these shackles feature a screw pin closure and are ideal for joining anchors to mooring chain.
Galvanized Anchor Shackle-3/8 - 147810 - 354-147810F1
With their rounded shape bow shackles are designed to handle many different types of load from any direction. Constructed of hot dip galvanized drop forged steel these shackles feature a screw pin closure and are ideal for joining anchors to mooring chain.
Galvanized Anchor Shackle-1/4" - 147806-1 - 354-1478061F1
With their rounded shape bow shackles are designed to handle many different types of load from any direction. Constructed of hot dip galvanized drop forged steel these shackles feature a screw pin closure and are ideal for joining anchors to mooring chain.
Galvanized Anchor Shackle 7/16" - 147811 - 354-147811F1
With their rounded shape bow shackles are designed to handle many different types of load from any direction. Constructed of hot dip galvanized drop forged steel these shackles feature a screw pin closure and are ideal for joining anchors to mooring chain.
Galvanized Anchor Shackle 1/2" - 147812-1 - 354-1478121F1
With their rounded shape bow shackles are designed to handle many different types of load from any direction. Constructed of hot dip galvanized drop forged steel these shackles feature a screw pin closure and are ideal for joining anchors to mooring chain.
Fuse Holder - Spade Terminal - 420504-1 - 354-4205041F1
AGC Round Fuse Holder with Flush Cap and Spade Terminal is constructed of molded Bakelite with stamped brass contacts and a flush cap. Panel mounted to provide overcurrent protection in electrical circuits. For use with standard AGC 1/4" x 1-1/4" glass style fuses. Maximum 15A @ 12VDC. Spade terminal. Fuse not included.
Fuse Holder - 420502-1 - 354-4205021F1
AGC Fuse Holder with Screw-On Cap is constructed of molded Bakelite with stamped brass contacts and a screw-on cap. Panel mounted to provide overcurrent protection in electrical circuits. For use with standard AGC 1/4" x 1-1/4" glass style fuses. Maximum 15A @ 12VDC. Solder terminal. Fuse not included.
Fuse Holder - 420501-1 - 354-4205011F1
Push in cap is made of stamped brass and molded bakelite.
Folding Pad Eye Ss 2" - 090145-1 - 354-0901451F1
These corrosion resistant stamped 304 stainless steel D-rings' convenient folding design keeps fittings out of the way when not in use. Multiple applications including rigging, tie-down and securing cargo for storage or transport. Installs with two RH fasteners (not included).
Folding Pad Eye Ss 2-5/8" - 090155-1 - 354-0901551F1
These corrosion resistant stamped 304 stainless steel D-rings' convenient folding design keeps fittings out of the way when not in use. Multiple applications including rigging, tie-down and securing cargo for storage or transport. Installs with two RH fasteners (not included).
Folding Pad Eye Ss 1-1/8" - 090125-1 - 354-0901251F1
These corrosion resistant stamped 304 stainless steel D-rings' convenient folding design keeps fittings out of the way when not in use. Multiple applications including rigging, tie-down and securing cargo for storage or transport. Installs with two RH fasteners (not included).
Flush Pull, White - 227321-1 - 354-2273211F1
Featuring a simple, sleek design, these Finger Pulls allow you to open a drawer or cabinet using just one finger. Constructed of durable, UV resistant, injection molded acetal. Flush mounted for a more inconspicuous look. Installs with four #6 FH fasteners (not included).
Flush Pull, Gray - 227322-1 - 354-2273221F1
Featuring a simple, sleek design, these Finger Pulls allow you to open a drawer or cabinet using just one finger. Constructed of durable, UV resistant, injection molded acetal. Flush mounted for a more inconspicuous look. Installs with four #6 FH fasteners (not included).
Flush Pull, Black - 227320-1 - 354-2273201F1
Featuring a simple, sleek design, these Finger Pulls allow you to open a drawer or cabinet using just one finger. Constructed of durable, UV resistant, injection molded acetal. Flush mounted for a more inconspicuous look. Installs with four #6 FH fasteners (not included).
Flush Mt Drink Holder, White - 588051 - 354-588051F1
Flush Mount Drink Holders accommodate drink containers up to 3-5/8 in diameter and require a 3-3/4" diameter hole for installation. 3" depth. Impact resistant injection molded ABS construction.
Flush Mt Drink Holder, White - 588011 - 354-588011F1
Flush Mount Drink Holders accommodate drink containers up to 2-7/8 in diameter and require a 3" diameter hole for installation. 3" depth. Impact resistant injection molded ABS construction.
Flush Mt Drink Holder, White - 588001 - 354-588001F1
Flush Mount Drink Holders accommodate drink containers up to 2-7/8 in diameter and require a 3" diameter hole for installation. 2" depth. Impact resistant injection molded ABS construction.
Flush Mt Drink Holder, Black - 588010 - 354-588010F1
Flush Mount Drink Holders accommodate drink containers up to 2-7/8 in diameter and require a 3" diameter hole for installation. 3" depth. Impact resistant injection molded ABS construction.
Flush Mount Rod Holder W/Cap - 325175-1 - 354-3251751F1
Flush Mount Rod Holder with Cap is constructed of corrosion resistant formed 316 stainless steel with a UV resistant PVC cap and full length PE liner. Features a 30° angle. Accommodates rods up to 1-1/2". Installs with three #12 FH fasteners (not included).
Floodlight-Halogen 12V 55W - 405110-1 - 354-4051101F1
This marine grade Halogen Flood Light features a fiberglass reinforced injection molded housing for strength and UV resistance, a solid glass lens, and a corrosion resistant stamped 304 stainless steel mounting bracket. H3 style 12V 55W halogen bulb.
Flexible Door Catches - 227023-1 - 354-2270231F1
Constructed of sturdy UV resistant injection molded nylon with a stainless steel spring clip. These Flexible Door Catches guarantee ease of alignment and durability in use. Includes 304 stainless adjustable door strike. Installs with two #4 RH fasteners (not included).
Flexible Base Adhesive Stud, 5/Pk - 297123-2 - 354-2971232F1
These flexible base canvas fasteners feature stainless steel snaps or sockets on a flexible acetal polymer which molds to rounded shapes for excellent adhesion. Each piece includes a special VHB (Very High Bond) adhesive for quick and easy attachment.
Flagpole Socket, 3/4" Chrome Brass - 492211-1 - 354-4922111F1
10° Flagpole Socket is used for flagpoles up to 3/4" in diameter. Maximum speed 10 MPH. Constructed of chrome plated sand cast brass for durability and corrosion resistance. Installs with three FH fasteners (not included).
Flagpole Socket, 1" Chrome Brass - 492212-1 - 354-4922121F1
10° Flagpole Socket is used for flagpoles up to 1" in diameter. Maximum speed 10 MPH. Constructed of chrome plated sand cast brass for durability and corrosion resistance. Installs with three FH fasteners (not included).
Flag Staff Mound Adj 1Set/Pk - 327194-1 - 354-3271941F1
Round Rail Mount Bracket for use with round flagpoles and is used on 7/8" and 1" tubing. Corrosion resistant, UV stabilized, injection molded nylon. Stainless steel mounting screws included. Use with Sea-Dog® Flagpoles 328112-1 and 328114-1. Maximum speed 10 MPH.
Fixed Boat Hook - 491013-1 - 354-4910131F1
Constructed of high quality, durable, marine grade aluminum tubing with a threaded end attachment and comfort grip handle. Includes a four-point hook attachment coated in soft, over-molded rubber to protect your boat from scuffs and scratches. Its buoyant design keeps the boat hook afloat for more than 5 minutes. The bright orange rubber tip is highly visible and removes for accessory attachment.
Fixed Boat Hook - 491012-1 - 354-4910121F1
Constructed of high quality, durable, marine grade aluminum tubing with a threaded end attachment and comfort grip handle. Includes a four-point hook attachment coated in soft, over-molded rubber to protect your boat from scuffs and scratches. Its buoyant design keeps the boat hook afloat for more than 5 minutes. The bright orange rubber tip is highly visible and removes for accessory attachment.
Fixed Antenna Base - 329510-1 - 354-3295101F1
Flange mount fixed antenna bracket. Investment cast 316 stainless steel construction. Designed to allow antenna wire to feed directly through the base eliminating the need for a separate cable grommet. Base is designed with a recess which, when filled with silicone sealant will form a watertight seal. Ideal for TV, Loran, GPS and VHF antenna's as well as radar arches. For use with standard 1"-14 threads. Installs with three 1/4 FH fasteners (not included).
Fixed Antenna Base - 329500-1 - 354-3295001F1
Flange mount fixed antenna bracket. Corrosion resistant injection molded nylon construction. This low-profile bracket will accept any standard antenna with 1"-14 threads, but is ideal for GPS, Marine TV and other shorter antennas. Installs with three 1/4" RH fasteners (not included).
Fender Hook Chrome/Brass 7/16" Line - 672520-1 - 354-6725201F1
Fender Hooks can be used for quick and easy placement of fenders anywhere on your boat. Constructed of chrome plated sand cast brass. Installs with two #8 FH fasteners (not included).
Fender Hook Chrome/Brass 5/16" Line - 672510-1 - 354-6725101F1
Fender Hooks can be used for quick and easy placement of fenders anywhere on your boat. Constructed of chrome plated sand cast brass. Installs with two #8 FH fasteners (not included).
Fairlead 5/8" Nylon - 82016 - 354-082016F1
Injection molded nylon with a molded-in recess in the base. This traps the sealant in place to provide a more watertight seal. Ideal for control lines. To be used in straight run application, not recommended for directional changes or for use with wire rope.
Fairlead 3/8" Nylon - 82010 - 354-082010F1
Injection molded nylon with a molded-in recess in the base. This traps the sealant in place to provide a more watertight seal. Ideal for control lines. To be used in straight run application, not recommended for directional changes or for use with wire rope.
Fairlead 1/2" Nylon - 82051 - 354-082051F1
Injection molded nylon with a molded-in recess in the base. This traps the sealant in place to provide a more watertight seal. Ideal for control lines. To be used in straight run application, not recommended for directional changes or for use with wire rope.
Eye Nuts Stainless 5/16"-18 - 78108 - 354-078108F1
For use as a lifting or securement point these eye nuts are constructed of investment cast marine grade 316 stainless steel for maximum corrosion resistance and durability. Designed to be screwed onto threaded rod stock or bolts to accommodate varying transom thicknesses.
Eye Nuts Stainless 5/16"-18 - 078108-1 - 354-0781081F1
For use as a lifting or securement point these eye nuts are constructed of investment cast marine grade 316 stainless steel for maximum corrosion resistance and durability. Designed to be screwed onto threaded rod stock or bolts to accommodate varying transom thicknesses.
Eye Nuts Stainless 1/4"-20 - 78106 - 354-078106F1
For use as a lifting or securement point these eye nuts are constructed of investment cast marine grade 316 stainless steel for maximum corrosion resistance and durability. Designed to be screwed onto threaded rod stock or bolts to accommodate varying transom thicknesses.
Eye Nuts Stainless 1/4"-20 - 078106-1 - 354-0781061F1
For use as a lifting or securement point these eye nuts are constructed of investment cast marine grade 316 stainless steel for maximum corrosion resistance and durability. Designed to be screwed onto threaded rod stock or bolts to accommodate varying transom thicknesses.
Eye Nut Stainless 8 Mm-1.25 Mm - 78208 - 354-078208F1
For use as a lifting or securement point these eye nuts are constructed of investment cast marine grade 316 stainless steel for maximum corrosion resistance and durability. Designed to be screwed onto threaded rod stock or bolts to accommodate varying transom thicknesses.
Eye Nut Stainless 3/8"-16 - 78110 - 354-078110F1
For use as a lifting or securement point these eye nuts are constructed of investment cast marine grade 316 stainless steel for maximum corrosion resistance and durability. Designed to be screwed onto threaded rod stock or bolts to accommodate varying transom thicknesses.
Eye Nut Stainless 3/8"-16 - 078110-1 - 354-0781101F1
For use as a lifting or securement point these eye nuts are constructed of investment cast marine grade 316 stainless steel for maximum corrosion resistance and durability. Designed to be screwed onto threaded rod stock or bolts to accommodate varying transom thicknesses.
Eye Nut Stainless 10 Mm-1.50 Mm - 78210 - 354-078210F1
For use as a lifting or securement point these eye nuts are constructed of investment cast marine grade 316 stainless steel for maximum corrosion resistance and durability. Designed to be screwed onto threaded rod stock or bolts to accommodate varying transom thicknesses.
Eye Nut Stainless 1/2"-13 - 78112 - 354-078112F1
For use as a lifting or securement point these eye nuts are constructed of investment cast marine grade 316 stainless steel for maximum corrosion resistance and durability. Designed to be screwed onto threaded rod stock or bolts to accommodate varying transom thicknesses.
Eye Nut Stainless 1/2"-13 - 078112-1 - 354-0781121F1
For use as a lifting or securement point these eye nuts are constructed of investment cast marine grade 316 stainless steel for maximum corrosion resistance and durability. Designed to be screwed onto threaded rod stock or bolts to accommodate varying transom thicknesses.
Electrogalvanized Utility Snap - 155822-1 - 354-1558221F1
Electrogalvanized Forged Steel
Electrogalvanized Steel Anchor Lift & Lock - 328040-1 - 354-3280401F1
Electrogalvanized steel anchor lift and lock system makes it easier to pull up your anchor and locks it in place.
Electrogalvanized Heavy Duty Utility Snap - 155832-1 - 354-1558321F1
These heavy duty utility snap hooks feature a breaking strength of 7,000 lbs. making them ideal for rugged marine applications. Spring-loaded closure for quick and easy connections. Constructed of electro-galvanized formed mild steel for both galvanic and corrosion protection.
Elec. Connector 3 Amp 4 Pin - 426264-1 - 354-4262641F1
Constructed of chrome plated brass. Includes a rubber gasket and water resistant cap. 3-5A. Installs with two #6 RH fasteners (not included).
Elec. Connector 3 Amp 3 Pin - 426263-1 - 354-4262631F1
Constructed of chrome plated brass. Includes a rubber gasket and water resistant cap. 3-5A. Installs with two #6 RH fasteners (not included).
Elastic Shock Cord-24" - 650240-1 - 354-6502401F1
These Elastic Shock Cords are great for securing bicycles, hand trucks, dinghies, or other odd-shaped items to your boat, trailer, or RV. Also handy for bundling items together, making them easier to carry or store. Constructed of natural rubber with a UV resistant polyethylene cover. Hooks are coated for corrosion and scratch resistance.
Dual/Quad Expanding Drink Holder W/Suction Cups - 588520-1 - 354-5885201F1
Dual/Quad Drink Holder with suction cups expands from dual to quad holders conserving space when not in use. Suction Cups offers a flexible solution, mounting easily to most surfaces. Accommodates drink containers up to 3-1/2" in diameter. Impact resistant injection molded nylon construction..
Drink Holder White Abs - 588211-1 - 354-5882111F1
Injection molded ABS. Folds to a closed depth of 15/16".
Drink Holder Black Abs - 588210-1 - 354-5882101F1
Injection molded ABS. Folds to a closed depth of 15/16".
Drain Plug Chrome On Brass - 520020-1 - 354-5200201F1
This Drain Plug has a molded-in captive mechanism that keeps the plug in the body, but still allows easy plug removal when needed. UV resistant injection molded nylon construction with a chrome plated formed brass base.
Drain Plug - 520030-1 - 354-5200301F1
Molded nylon. Designed to fit securely in a 1" hole without the use of fasteners. The ridges on the body of the drain plug are designed to keep the plug in place. Sealant should be applied prior to installation to make a watertight seal.
Door Hook Ss 4" W/2 Staples - 221208-1 - 354-2212081F1
These hook and eye style Two Staple Door Hooks feature a unique rubber bushing that prevents accidental unhooking due to vibration. All machined AISI 304 stainless steel construction provides superior corrosion resistance and durability. In addition, the rubber bushing reduces most of the rattling and noise common in other door hooks. Extra staple can be mounted to secure the cabin door in both open and closed positions. Easy to install, simply surface mount with six #8 FH fasteners (not included).
Door Hook Ss 3-1/4" W/Staples - 221207-1 - 354-2212071F1
These hook and eye style Two Staple Door Hooks feature a unique rubber bushing that prevents accidental unhooking due to vibration. All machined AISI 304 stainless steel construction provides superior corrosion resistance and durability. In addition, the rubber bushing reduces most of the rattling and noise common in other door hooks. Extra staple can be mounted to secure the cabin door in both open and closed positions. Easy to install, simply surface mount with six #8 FH fasteners (not included).
Door Hook Ss 2-1/2" W/Staples - 221206-1 - 354-2212061F1
These hook and eye style Two Staple Door Hooks feature a unique rubber bushing that prevents accidental unhooking due to vibration. All machined AISI 304 stainless steel construction provides superior corrosion resistance and durability. In addition, the rubber bushing reduces most of the rattling and noise common in other door hooks. Extra staple can be mounted to secure the cabin door in both open and closed positions. Easy to install, simply surface mount with six #8 FH fasteners (not included).
Door Hook Ss - 221204-1 - 354-2212041F1
These hook and eye style cabin Door Hooks feature a unique rubber bushing that prevents accidental unhooking due to vibration. All machined AISI 304 stainless steel construction provides superior corrosion resistance and durability. In addition, the rubber bushing reduces most of the rattling and noise common in other door hooks. Easy to install, simply surface mount with four #8 FH fasteners (not included).
Door Hook Ss - 221203-1 - 354-2212031F1
These hook and eye style cabin Door Hooks feature a unique rubber bushing that prevents accidental unhooking due to vibration. All machined AISI 304 stainless steel construction provides superior corrosion resistance and durability. In addition, the rubber bushing reduces most of the rattling and noise common in other door hooks. Easy to install, simply surface mount with four #8 FH fasteners (not included).
Door Hook Ss - 221202-1 - 354-2212021F1
These hook and eye style cabin Door Hooks feature a unique rubber bushing that prevents accidental unhooking due to vibration. All machined AISI 304 stainless steel construction provides superior corrosion resistance and durability. In addition, the rubber bushing reduces most of the rattling and noise common in other door hooks. Easy to install, simply surface mount with four #8 FH fasteners (not included).
Door Hook Chrome/Brass 2" - 222112-1 - 354-2221121F1
Chrome plated brass. Carded.
Door Hinges - 201531-1 - 354-2015311F1
These Door Hinges are constructed of corrosion resistant stamped 304 stainless steel to withstand the harsh marine environment. Installs with six #8 FH fasteners (not included).
Door Hinges - 201030-1 - 354-2010301F1
These Door Hinges are constructed of corrosion resistant stamped 304 stainless steel to withstand the harsh marine environment. Installs with six #8 FH fasteners (not included).
Door Catches - 227135-1 - 354-2271351F1
Constructed of sturdy injection molded nylon. These Door Catches provide secure closure for cabinet doors. Installs with four #6 RH fasteners (not included).
Dock Edge 3251731 Economy Flush Mount Rod Holder With Cap - 325173-1 - 354-3251731F1
constructed of formed 304 stainless steel with a plastic liner, mounting gasket, and integral cap. Features a 90° angle. Accommodates rods up to 1-1/2". Installs with three #12 FH fasteners (not included).
Deluxe Power Socket - 426120-1 - 354-4261201F1
Deluxe Power Socket adds power easily almost anywhere. Installation is as easy as drilling a 1-1/8" hole, inserting the socket body, tightening the locking nut, and connecting the wires. Constructed of injection molded nylon and ABS with stamped brass contacts. Maximum: 12VDC, 16A. Includes all necessary mounting hardware and wire connectors.
Delrin Flush Pull(Small) - Black - 227310-1 - 354-2273101F1
Injection molded Acetal.
Deck Plate Key Univ Small - 335695-1 - 354-3356951F1
Universal Deck Fill Key is constructed stamped 304 stainless steel for corrosion resistance. Fits most deck fills and includes a bottle opener and shackle key.
Deck Plate Key - 335699-1 - 354-3356991F1
Fits all cast stainless steel Sea Dog Deck Fill Caps. Formed 304 stainless steel.
Deck Mount Bow Sockets - 327410-1 - 354-3274101F1
These Deck Mount Bow Sockets are used in conjunction with battens to assemble a rounded support structure for a boat cover. Part of a system to disperse rain water to avoid water from accumulating in the center of the cover. Recessed base design accepts sealant, allowing for a watertight seal without the use of gaskets. Injection molded nylon construction. Installs with two #10 FH fasteners (not included). Available in black or white.
Deck Hinge Lock-Rt&Lf 2/Cd - 273286-1 - 354-2732861F1
Provide slide adjustment for the convenient use and storage of Bimini top frames. Designed to attach an eye end. Functions as an alternative to a brace kit. Locking Deck Hinges utilize a filister screw to lock hinge in place. UV stabilized injection molded nylon construction. 3/16" pin size. For use in 0.850 track.
Deck Hinge Lock-Rt&Lf 2/Cd - 273285-1 - 354-2732851F1
Provide slide adjustment for the convenient use and storage of Bimini top frames. Designed to attach an eye end. Functions as an alternative to a brace kit. Locking Deck Hinges utilize a filister screw to lock hinge in place. UV stabilized injection molded nylon construction. 3/16" pin size. For use in 0.850 track.
Deck Hinge Angled Ss Sold Each - 270230-1 - 354-2702301F1
These Top Mount Hinge Fittings are designed to mount horizontally and attach an eye end in Bimini top applications. Angled Hinges are used for mounting items on slanted surfaces like sloped gunwales. Corrosion resistant investment cast 316 stainless steel construction. These hinges install with two #10 FH fasteners (not included). 1/4" pin size.
Deck Hinge 90Deg Heavy Duty Stainless - 270205-1 - 354-2702051F1
316 stainless steel. Packed one per card.
Deck Hinge (Angled) W/Remov- - 270235-1 - 354-2702351F1
These Top Mount Hinge Fittings are designed to mount horizontally and attach an eye end in Bimini top applications. Angled Hinges are used for mounting items on slanted surfaces like sloped gunwales. Removable Pin Deck Hinges feature a spring loaded quick release pin for easy top removal. Corrosion resistant investment cast 316 stainless steel construction. These hinges install with two #10 FH fasteners (not included). 1/4" pin size.
Deck Fill Cap-Green (Diesel) - 357091-1 - 354-3570911F1
Injection molded fiberglass filled nylon. Does not require grounding. Each deck fill has a special cap with a built-in key for easy cap removal. Cap threads are 1-1/4" x 11-1/2 NPSM-Straight. Gas, diesel, & water caps include safety chain. # 10 fastener.
Deck Fill Cap-Green (Diesel) - 357016-1 - 354-3570161F1
Green Diesel Cap Only. Cap threads are 1-1/4" x 11-1/2 NPSM straight.
Deck Fill Cap-Brown (Waste) - 357094-1 - 354-3570941F1
Injection molded fiberglass filled nylon. Does not require grounding. Each deck fill has a special cap with a built-in key for easy cap removal. Cap threads are 1-1/4" x 11-1/2 NPSM-Straight. Gas, diesel, & water caps include safety chain. # 10 fastener.
Deck Fill Cap-Blue (Water) - 357093-1 - 354-3570931F1
Injection molded fiberglass filled nylon. Does not require grounding. Each deck fill has a special cap with a built-in key for easy cap removal. Cap threads are 1-1/4" x 11-1/2 NPSM-Straight. Gas, diesel, & water caps include safety chain. # 10 fastener.
Deck Fill Cap-Black (Waste) - 357018-1 - 354-3570181F1
Black Waste Cap Only. Cap threads are 1-1/4" x 11-1/2 NPSM straight.
Deck Fill Cap-Black (Oil) - 357092-1 - 354-3570921F1
Injection molded fiberglass filled nylon. Does not require grounding. Each deck fill has a special cap with a built-in key for easy cap removal. Cap threads are 1-1/4" x 11-1/2 NPSM-Straight. Gas, diesel, & water caps include safety chain. # 10 fastener.
Cupboard Bolt - 222380-1 - 354-2223801F1
Surface mounted to the front of a cupboard door, these Cupboard Bolts are used to secure cabinet doors while underway. Corrosion resistant chrome plated extruded brass construction. Installs easily with six #6 FH fasteners (not included).
Coupler Lock - 751030-1 - 354-7510301F1
Two Piece Coupler Lock is designed for theft deterrence, and to add an additional level of security preventing accidental uncoupling while in transit to better protect your trailer. Two-piece design for better access in hard to reach places. Fits most coupler sizes. Includes two keys. Corrosion resistant brass plated zinc construction.
Copper Plated Battery Clip, Pair - 426460-1 - 354-4264601F1
Battery Clips are constructed of stamped copper plated steel for better conductivity. This pair of spring-loaded Battery Clips are used for creating temporary electrical connections. Color coded to avoid polarity misidentification. Includes one positive and one negative battery clip. 10A. 12VDC.
Contura® Rocker Switch (Spst) - Non-Illuminated On/Off - 420201-1 - 354-4202011F1
Constructed of injection molded nylon and stamped brass with silver tin oxide contacts. Vibration, shock, thermoshock, moisture, and salt spray resistant. Temperature range from -40°C to +85°C. UL1500 / ISO8846 ignition protection for marine products. Switch displays a red light when in the on position. 20A @ 12VDC. IP66 rating (for front panel components only).
Contura® Rocker Switch (Spst) - Non-Illuminated Mom On-Off - 420202-1 - 354-4202021F1
Constructed of injection molded nylon and stamped brass with silver tin oxide contacts. Vibration, shock, thermoshock, moisture, and salt spray resistant. Temperature range from -40°C to +85°C. UL1500 / ISO8846 ignition protection for marine products. Switch displays a red light when in the on position. 20A @ 12VDC. IP66 rating (for front panel components only).
Contura® Rocker Switch (Spst) - Illuminated On/Off - 420211-1 - 354-4202111F1
Constructed of injection molded nylon and stamped brass with silver tin oxide contacts. Vibration, shock, thermoshock, moisture, and salt spray resistant. Temperature range from -40°C to +85°C. UL1500 / ISO8846 ignition protection for marine products. Switch displays a red light when in the on position. 20A @ 12VDC. IP66 rating (for front panel components only).
Contura® Rocker Switch (Spst) - Illuminated Mom On/Off - 420212-1 - 354-4202121F1
Constructed of injection molded nylon and stamped brass with silver tin oxide contacts. Vibration, shock, thermoshock, moisture, and salt spray resistant. Temperature range from -40°C to +85°C. UL1500 / ISO8846 ignition protection for marine products. Switch displays a red light when in the on position. 20A @ 12VDC. IP66 rating (for front panel components only).
Contura® Rocker Switch (Spdt) - Non-Illuminated On-Off-On - 420203-1 - 354-4202031F1
Constructed of injection molded nylon and stamped brass with silver tin oxide contacts. Vibration, shock, thermoshock, moisture, and salt spray resistant. Temperature range from -40°C to +85°C. UL1500 / ISO8846 ignition protection for marine products. Switch displays a red light when in the on position. 20A @ 12VDC. IP66 rating (for front panel components only).
Contura® Rocker Switch (Spdt) - Non-Illuminated Mom On-Off-Mom On - 420204-1 - 354-4202041F1
Constructed of injection molded nylon and stamped brass with silver tin oxide contacts. Vibration, shock, thermoshock, moisture, and salt spray resistant. Temperature range from -40°C to +85°C. UL1500 / ISO8846 ignition protection for marine products. Switch displays a red light when in the on position. 20A @ 12VDC. IP66 rating (for front panel components only).
Contura® Rocker Switch (Spdt) - Illuminated On/Off/On - 420213-1 - 354-4202131F1
Constructed of injection molded nylon and stamped brass with silver tin oxide contacts. Vibration, shock, thermoshock, moisture, and salt spray resistant. Temperature range from -40°C to +85°C. UL1500 / ISO8846 ignition protection for marine products. Switch displays a red light when in the on position. 20A @ 12VDC. IP66 rating (for front panel components only).
Contura® Rocker Switch (Dpdt) - Non-Illuminated Mom On/Off/Mom On - 420209-1 - 354-4202091F1
Constructed of injection molded nylon and stamped brass with silver tin oxide contacts. Vibration, shock, thermoshock, moisture, and salt spray resistant. Temperature range from -40°C to +85°C. UL1500 / ISO8846 ignition protection for marine products. Switch displays a red light when in the on position. 20A @ 12VDC. IP66 rating (for front panel components only).
Contura® Rocker Switch (Dpdt) - Illuminated On/Off/On - 420218-1 - 354-4202181F1
Constructed of injection molded nylon and stamped brass with silver tin oxide contacts. Vibration, shock, thermoshock, moisture, and salt spray resistant. Temperature range from -40°C to +85°C. UL1500 / ISO8846 ignition protection for marine products. Switch displays a red light when in the on position. 20A @ 12VDC. IP66 rating (for front panel components only).
Concave Rail Deck Hinge W 2/Cd - 273241-1 - 354-2732411F1
These Top Mount Hinge Fittings are designed to mount horizontally and attach an eye end in Bimini top applications. Concave Hinges are designed to rail mount on 1" tubing. These hinges install with two #10 FH fasteners (not included).
Concave Rail Deck Hinge B 2/Cd - 273240-1 - 354-2732401F1
These Top Mount Hinge Fittings are designed to mount horizontally and attach an eye end in Bimini top applications. Concave Hinges are designed to rail mount on 1" tubing. These hinges install with two #10 FH fasteners (not included).
Combination Bow Light Ss - 400150-1 - 354-4001501F1
Round Combination Bow Light is constructed of stamped 304 stainless steel. For replacement of existing lighting (not for new construction). Installs with three #4 RH fasteners (not included). All USCG approved navigation lights must be mounted properly to provide the correct visual alignment and allow unimpeded sight lines. Please refer to USCG regulations for 1 NM and 2 NM navigation lights for more information.
Combination Bow Light - 400157-1 - 354-4001571F1
Low Profile Combination Bow Light is constructed of die cast chrome zinc. For replacement of existing lighting (not for new construction). Installs with two #10 FH fasteners (not included). Lens can be reversed for under mounting. Recommended for use in fresh water applications. All USCG approved navigation lights must be mounted properly to provide the correct visual alignment and allow unimpeded sight lines. Please refer to USCG regulations for 1 NM and 2 NM navigation lights for more information.
Combination Bow Light - 400155-1 - 354-4001551F1
Combination Bow Light is constructed of die cast chrome zinc. For replacement of existing lighting (not for new construction). Installs with two #10 FH fasteners (not included). Recommended for use in fresh water applications. All USCG approved navigation lights must be mounted properly to provide the correct visual alignment and allow unimpeded sight lines. Please refer to USCG regulations for 1 NM and 2 NM navigation lights for more information.
Coho Fish Cleaner - 325950 - 354-325950F1
Strong, high impact polypropylene makes the Coho Fish Cleaner lightweight and portable. One-piece injection molded construction makes it easy to clean and maintain. Hooks attach to underside of gunnel (no holes required) allowing the tray to hang over the side of the boat, eliminating the mess of cleaning fish. Can be adapted to different mounting situations simply by changing the position of the adjustment knots.
Cobra Round Power Socket/Meter Mounting Bracket - 426105-1 - 354-4261051F1
This injection molded nylon bracket is designed for the external mounting of round power sockets and gauges 1-1/8" in diameter. Fits all Sea-Dog® power sockets and meters.
Cobra Led Power Socket - 426127-1 - 354-4261271F1
LED Power Socket adds power easily almost anywhere. Installation is as easy as drilling a 1-1/8" hole, inserting the socket body, tightening the locking nut, and connecting the wires. 2 blue LEDs light up the interior. Constructed of injection molded nylon and ABS with stamped brass contacts. Input 12-24VDC. 16A. IP65 rating.
Cobra Dual Voltmeter - Rocker Switch Style - 421636-1 - 354-4216361F1
This rocker switch style dual voltmeter monitors and displays the voltage for main and auxiliary batteries simultaneously. Injection molded nylon construction. Fits into any 13/16" x 1-7/16" rocker switch hole. Digital red LED display. IP65 rating. 10-48 volts. Injection molded nylon.
Cleat Nylon 8-1/2" Black - 43080 - 354-043080F1
Durable corrosion and UV resistant injection molded nylon construction. These open base cleats are designed with a molded-in recess in the base trapping sealant in place providing a more watertight seal. Easy to install, requires two FH fasteners (not included).
Cleat Nylon 6-1/2" Black - 43065 - 354-043065F1
Durable corrosion and UV resistant injection molded nylon construction. These open base cleats are designed with a molded-in recess in the base trapping sealant in place providing a more watertight seal. Easy to install, requires two FH fasteners (not included).
Cleat Nylon 5" Black - 43050 - 354-043050F1
Durable corrosion and UV resistant injection molded nylon construction. These open base cleats are designed with a molded-in recess in the base trapping sealant in place providing a more watertight seal. Easy to install, requires two FH fasteners (not included).
Cleat Nylon 4" Black - 43040 - 354-043040F1
Durable corrosion and UV resistant injection molded nylon construction. These open base cleats are designed with a molded-in recess in the base trapping sealant in place providing a more watertight seal. Easy to install, requires two FH fasteners (not included).
Cleat Nylon 3" Black - 43030 - 354-043030F1
Durable corrosion and UV resistant injection molded nylon construction. These open base cleats are designed with a molded-in recess in the base trapping sealant in place providing a more watertight seal. Easy to install, requires two FH fasteners (not included).
Cleat 6 1/2" Black Nylon - 043065-1 - 354-0430651F1
Durable corrosion and UV resistant injection molded nylon construction. These open base cleats are designed with a molded-in recess in the base trapping sealant in place providing a more watertight seal. Easy to install, requires two FH fasteners (not included).
Cleat 4" Black Nylon Pair - 043040-1 - 354-0430401F1
Durable corrosion and UV resistant injection molded nylon construction. These open base cleats are designed with a molded-in recess in the base trapping sealant in place providing a more watertight seal. Easy to install, requires two FH fasteners (not included).
Cleat 3" Black Nylon - 043030-1 - 354-0430301F1
Durable corrosion and UV resistant injection molded nylon construction. These open base cleats are designed with a molded-in recess in the base trapping sealant in place providing a more watertight seal. Easy to install, requires two FH fasteners (not included).
Cl214 Clamcleat, Fine Line (Port Side) - 002140-1 - 354-0021401F1
Clamcleats are marine grade nylon cleats. Ideal for most applications where high loads or rope surges are not likely to be encountered. Corrosion resistant.
Cl209 Clamcleat, Midi - 2090 - 354-002090F1
Clamcleats are marine grade nylon cleats. Ideal for most applications where high loads or rope surges are not likely to be encountered. Corrosion resistant.
Cl209 Clamcleat, Midi - 002090-1 - 354-0020901F1
Clamcleats are marine grade nylon cleats. Ideal for most applications where high loads or rope surges are not likely to be encountered. Corrosion resistant.
Cl205 Clamcleat, Major - 2050 - 354-002050F1
Clamcleats are marine grade nylon cleats. Ideal for most applications where high loads or rope surges are not likely to be encountered. Corrosion resistant.
Cl204 Clamcleat, Mini - 002040-1 - 354-0020401F1
Clamcleats are marine grade nylon cleats. Ideal for most applications where high loads or rope surges are not likely to be encountered. Corrosion resistant.
Cl203 Clamcleat, Junior - 002030-1 - 354-0020301F1
Clamcleats are marine grade nylon cleats. Ideal for most applications where high loads or rope surges are not likely to be encountered. Corrosion resistant.
Cl201 Clamcleat, Vertical - 002010-1 - 354-0020101F1
Clamcleats are marine grade nylon cleats. Ideal for most applications where high loads or rope surges are not likely to be encountered. Corrosion resistant.
Circuit Breaker W/Cover (Resettable) - 420855-1 - 354-4208551F1
Inline Resettable Circuit Breakers with manual reset button are for use with higher amperage accessories. These breakers are ignition protected and can be installed aboard gasoline powered boats. May be used on 12V or 24V systems. Injection molded nylon and polycarbonate construction with stamped brass #10-32 studs with nuts. The copper post is the battery or "power in" post and the silver post is the auxiliary or "power out" protected post. Includes splash proof Breaker Cover (420840). Complies with SAE standard J553 and SAE J1171.
Circuit Breaker W/Cover (Resettable) - 420854-1 - 354-4208541F1
Inline Resettable Circuit Breakers with manual reset button are for use with higher amperage accessories. These breakers are ignition protected and can be installed aboard gasoline powered boats. May be used on 12V or 24V systems. Injection molded nylon and polycarbonate construction with stamped brass #10-32 studs with nuts. The copper post is the battery or "power in" post and the silver post is the auxiliary or "power out" protected post. Includes splash proof Breaker Cover (420840). Complies with SAE standard J553 and SAE J1171.
Circuit Breaker W/Cover (Resettable) - 420853-1 - 354-4208531F1
Inline Resettable Circuit Breakers with manual reset button are for use with higher amperage accessories. These breakers are ignition protected and can be installed aboard gasoline powered boats. May be used on 12V or 24V systems. Injection molded nylon and polycarbonate construction with stamped brass #10-32 studs with nuts. The copper post is the battery or "power in" post and the silver post is the auxiliary or "power out" protected post. Includes splash proof Breaker Cover (420840). Complies with SAE standard J553 and SAE J1171.
Circuit Breaker W/Cover (Resettable) - 420852-1 - 354-4208521F1
Inline Resettable Circuit Breakers with manual reset button are for use with higher amperage accessories. These breakers are ignition protected and can be installed aboard gasoline powered boats. May be used on 12V or 24V systems. Injection molded nylon and polycarbonate construction with stamped brass #10-32 studs with nuts. The copper post is the battery or "power in" post and the silver post is the auxiliary or "power out" protected post. Includes splash proof Breaker Cover (420840). Complies with SAE standard J553 and SAE J1171.
Circuit Breaker (Resettable) - 420845-1 - 354-4208451F1
Inline Resettable Circuit Breakers with manual reset button are for use with higher amperage accessories. These breakers are ignition protected and can be installed aboard gasoline powered boats. May be used on 12V or 24V systems. Injection molded nylon and polycarbonate construction with stamped brass #10-32 studs with nuts. The copper post is the battery or "power in" post and the silver post is the auxiliary or "power out" protected post. Complies with SAE standard J553 and SAE J1171.
Circuit Breaker (Resettable) - 420844-1 - 354-4208441F1
Inline Resettable Circuit Breakers with manual reset button are for use with higher amperage accessories. These breakers are ignition protected and can be installed aboard gasoline powered boats. May be used on 12V or 24V systems. Injection molded nylon and polycarbonate construction with stamped brass #10-32 studs with nuts. The copper post is the battery or "power in" post and the silver post is the auxiliary or "power out" protected post. Complies with SAE standard J553 and SAE J1171.
Circuit Breaker (Resettable) - 420843-1 - 354-4208431F1
Inline Resettable Circuit Breakers with manual reset button are for use with higher amperage accessories. These breakers are ignition protected and can be installed aboard gasoline powered boats. May be used on 12V or 24V systems. Injection molded nylon and polycarbonate construction with stamped brass #10-32 studs with nuts. The copper post is the battery or "power in" post and the silver post is the auxiliary or "power out" protected post. Complies with SAE standard J553 and SAE J1171.
Circuit Breaker (Resettable) - 420842-1 - 354-4208421F1
Inline Resettable Circuit Breakers with manual reset button are for use with higher amperage accessories. These breakers are ignition protected and can be installed aboard gasoline powered boats. May be used on 12V or 24V systems. Injection molded nylon and polycarbonate construction with stamped brass #10-32 studs with nuts. The copper post is the battery or "power in" post and the silver post is the auxiliary or "power out" protected post. Complies with SAE standard J553 and SAE J1171.
Chrome Zinc Open Base Cleat - 044604-1 - 354-0446041F1
Die cast chrome plated zinc open base cleats are an economical choice for freshwater applications. Provides easy line tie-off in a classic style. Four thru-bolts required for installation (not included). Interchangeable with legacy Perko® style1188 cleats.
Chrome Zinc Gas Fill With Spla - 351750-1 - 354-3517501F1
Hose Deck Fill with Splash Guard is constructed with chrome plated die cast zinc. Cap features easy-to-use tabs for keyless operation - no deck plate key required. Includes attachment chain. Cap threads are 1" - 12 NPSM straight. Installs with three #10 FH fasteners (not included). Fits 1-1/2" ID hose. USCG regulations require bonding wire to prevent sparking.
Chrome Zinc Cleat With 1/4 Z - 44204 - 354-044204F1
Die cast chrome plated zinc stud-mount cleats feature attractive, traditional styling. Installation is easy with two standard bit size holes drilled for the studs, no cut-outs or hole saws required. The stud mounted fasteners are hidden leaving no exposed fasteners to collect water or debris. Galvanized studs, washers and nuts included for clean looking installation. Interchangeable with legacy Perko® style 1210 cleats. Recommended for freshwater applications.
Chrome Plated Zinc Door Hinge - 206530-1 - 354-2065301F1
Constructed of chrome plated die cast zinc these door latches are an economical option. Installs with six #8 FH fasteners (not included). Recommended for freshwater applications.
Chrome Plated Zinc Cable Clamp, Pair - 091852-1 - 354-0918521F1
This die cast zinc, chrome plated wire rope clamp is used to secure 1/8" - 3/16" diameter wire cable.
Chrome Plated Zinc Cable Clamp, Bulk - 91852 - 354-091852F1
This die cast zinc, chrome plated wire rope clamp is used to secure 1/8" - 3/16" diameter wire cable.
Chrome Brass Take-Apart Hinge( - 204279-1 - 354-2042791F1
Alows a door or lid to be removed after installation without having to remove the fasteners. Surface mounted, these chrome plated forged brass hinges can be used horizontally or vertically. Installs with four #10 FH fasteners (not included).
Chrome Brass Door Hook-3" - 222113-1 - 354-2221131F1
Chrome plated brass. Carded.
Chrome Brass Cable Outlet, 5/16" - 426042-1 - 354-4260421F1
Chrome plated cast brass outlet provides a watertight seal for cable installations. Faceplate installs with three #6 FH fasteners (not included).
Chrome Brass Cable Outlet, 3/8" - 426051-1 - 354-4260511F1
Chrome plated cast brass outlet provides a watertight seal for cable installations. Faceplate installs with three #6 FH fasteners (not included).
Chrome Brass Cable Outlet, 1/4" - 426040-1 - 354-4260401F1
Chrome plated cast brass outlet provides a watertight seal for cable installations. Faceplate installs with three #6 FH fasteners (not included).
Cast Stainless Deck Plate Key - 351399-1 - 354-3513991F1
Deck Fill Key is constructed of investment cast 316 stainless steel. For use with all Fill Caps with 1-3/16" holes on center.
Cast Ring Pull - 221850-1 - 354-2218501F1
Constructed of corrosion resistant investment cast 316 stainless steel. These ring pulls are ideal for use on doors, hatches, lazarettes, and dock boxes. Ring pivots out to open hatches, etc. and lays flush when not in use for a clean appearance. Installs with four #8 FH fasteners (not included).
Cap For 357010-Gas(Red) - 357015-1 - 354-3570151F1
Red Gas Cap Only. Cap threads are 1-1/4" x 11-1/2 NPSM straight.
Cable Outlet 12-Volt Plug Only - 426144-1 - 354-4261441F1
Chrome brass. 12 volt, 2 pin.
Butt Hinges, Pr. - 202581-1 - 354-2025811F1
Consists of two rectangular leaves that attach to the abutting surfaces of a door and door jamb. Constructed of UV resistant, injection molded fiberglass nylon with a corrosion resistant, stainless steel pin. Installs with four #8 FH fasteners (not included).
Butt Hinges, Pr. - 202580-1 - 354-2025801F1
Consists of two rectangular leaves that attach to the abutting surfaces of a door and door jamb. Constructed of UV resistant, injection molded fiberglass nylon with a corrosion resistant, stainless steel pin. Installs with four #8 FH fasteners (not included).
Bulb #70-1 Festoon (Perko) 2Cd - 441070-1 - 354-4410701F1
Festoon Light Bulbs are double ended bulbs that resemble AGC style glass fuses and are often used for marine navigation lighting. They give off a warm, incandescent white light. Nickel plated brass tips for corrosion resistance and positive contact. Heavy duty glass bulb housing and filaments for break resistance and longevity. 12.8VDC.
Bulb #212-1 - 441212-1 - 354-4412121F1
Festoon Light Bulbs are double ended bulbs that resemble AGC style glass fuses and are often used for marine navigation lighting. They give off a warm, incandescent white light. Nickel plated brass tips for corrosion resistance and positive contact. Heavy duty glass bulb housing and filaments for break resistance and longevity. 12.8VDC.
Bulb #211-2 - 441211-1 - 354-4412111F1
Festoon Light Bulbs are double ended bulbs that resemble AGC style glass fuses and are often used for marine navigation lighting. They give off a warm, incandescent white light. Nickel plated brass tips for corrosion resistance and positive contact. Heavy duty glass bulb housing and filaments for break resistance and longevity. 12.8VDC.
Bulb #194 - 441194-1 - 354-4411941F1
Similar to a bi-pin connector, a Wedge Base Light Bulb uses two wires that extend into the bulb and are bent up onto the sides of the base where they make contact with the socket. Compression force holds the bulb in the socket to prevent it from loosening from vibration. Ideal for inside or under cabinets and shelves. 12.8VDC.
Bronze Swivel Eye Bolt Snap - 139016-1 - 354-1390161F1
Swivel eye bolt snaps are designed for use with rope, chain, wire or cable. Constructed of corrosion resistant sand cast brass they can be used for tie-downs, lifting wires or other rigging applications. 360° swivel strap eye eliminates tangling. Spring-loaded bolts provide secure closure with the advantage of an easy-open thumb lever. Polished finish makes them both functional and decorative.
Bronze Garboard Drain - 520040-1 - 354-5200401F1
Machined bronze Garboard Drain & Plug provides drainage for bilge during haul-out. 1/2" NPT tapered thread plug provides a watertight seal with 2" diameter flange. Plug has a square top for use with a socket wrench. Installs with three #10 FH fasteners (not included).
Brass Swivel Eye Snap Size-2, Carded - 139132-1 - 354-1391321F1
This swivel eye boat snap features a spring-loaded latch for easy attachment. Constructed of sand cast brass for corrosion resistance and durability they are designed for medium duty lifting and rigging applications. 360° swivel eye eliminates tangling. Polished finish makes them both functional and decorative.
Brass Snap Handle Drain Plug, 1" W/O Chain, Bulk - 520070 - 354-520070F1
Brass Snap Handle Drain Plug, 1" w/o Chain
Brass Snap Handle Drain Plug, 1" W/O Chain, 25 Pc Display - 520070-5 - 354-5200705F1
Snap Handle Drain Plug, 1"
Brass Snap Handle Drain Plug, 1-1/4" W/O Chain, Bulk - 520072 - 354-520072F1
Brass Snap Handle Drain Plug, 1-1/4" w/o Chain
Brass Push Button Switch With - 420422-1 - 354-4204221F1
This universal Momentary Push Button On-Off Switch can be panel mounted in a 5/8" diameter hole and is wired with two screw terminals. Stamped brass construction to withstand harsh marine conditions. Switch options include: No cap, a standard black waterproof cap, or a bright red waterproof cap to make it easily identifiable in emergency situations. Maximum panel thickness: 1". 15A @ 12VDC.
Brass 3-Position Key Switch - 420350-1 - 354-4203501F1
Three Position Ignition Switch is constructed of stamped brass. For off, ignition, and start functions. 13/16" diameter long shaft. Maximum panel thickness: 1-1/8. Three screw terminal electrical connection. Ignition: 15A @ 12VDC. Solenoid: 30A @ 12VDC. Includes two keys.
Bow Form Flag Pole - 328110-1 - 354-3281101F1
The formed 304 stainless flag pole fits most bow forms with 1/2" diameter flag pole mounting holes. Each flag pole comes complete with split rings for easy flag attachment. Maximum safe speed 10 MPH.
Boat Plug Pop Display - 520041-5 - 354-5200415F1
Machined bronze Garboard Drain & Plug provides drainage for bilge during haul-out. 1/2" NPT tapered thread plug provides a watertight seal with 2" diameter flange. Plug has a square top for use with a socket wrench. Installs with three #10 FH fasteners (not included).
Boat Cover Bow Sockets - 327415-1 - 354-3274151F1
These Deck Mount Bow Sockets are used in conjunction with battens to assemble a rounded support structure for a boat cover. Part of a system to disperse rain water to avoid water from accumulating in the center of the cover. Die cast chrome plated zinc construction. Installs with two #8 FH fasteners (not included). Recommended for fresh water applications.
Blk Nylon Webbing Handle - 10" - 227462-1 - 354-2274621F1
Webbing Lift Handle is constructed of nylon webbing with an injection molded nylon handle that is easy to hold even when wet. Ideal for replacement of worn or torn handles or to add another handle to make it easier to carry your kayak or canoe. Works for both end and side carry handles. Installs with two #10 RH fasteners (not included). Includes nylon end caps. Can be installed on an inflatable boat with use of the proper adhesive.
Blend Base, 5-1/2°, 7/8" - 286955-1 - 354-2869551F1
Constructed of chrome plated die cast zinc. Recommended for freshwater use. Installs to deck with #10 FH fasteners (not included). Fittings can be attached to railing with set screws or can be pop riveted using stainless or aluminum rivets. For use with 7/8" OD stainless tubing with a wall thickness of 0.049".
Black Nylon Open Base Cleat-5 - 043050-1 - 354-0430501F1
Durable corrosion and UV resistant injection molded nylon construction. These open base cleats are designed with a molded-in recess in the base trapping sealant in place providing a more watertight seal. Easy to install, requires two FH fasteners (not included).
Black Bimini Strap - 298172-1 - 354-2981721F1
Nylon Bimini Straps are 1" wide with corrosion resistant stainless snap hooks. Used to replace lost or damaged Bimini top straps. 8' long.
Battery Terminal Covers - 415115-1 - 354-4151151F1
These Battery Terminal Covers are designed to insulate integral marine wing nut terminals protecting battery cables from corrosion and shorting. Constructed of injection molded PVC. These covers satisfy USCG and ABYC requirements for the prevention of accidental grounding of battery terminals. Color coded to avoid polarity misidentification. Will fit most marine batteries as well as automotive batteries using add on marine terminals.
Battery Terminal Covers - 415110-1 - 354-4151101F1
These Battery Terminal Covers are designed to insulate integral marine wing nut terminals protecting battery cables from corrosion and shorting. Constructed of injection molded PVC. These covers satisfy USCG and ABYC requirements for the prevention of accidental grounding of battery terminals. Color coded to avoid polarity misidentification. Will fit most marine batteries as well as automotive batteries using add on marine terminals.
Battery Terminal Cover, Red - 415116 - 354-415116F1
These Battery Terminal Covers are designed to insulate integral marine wing nut terminals protecting battery cables from corrosion and shorting. Constructed of injection molded PVC. These covers satisfy USCG and ABYC requirements for the prevention of accidental grounding of battery terminals. Color coded to avoid polarity misidentification. Will fit most marine batteries as well as automotive batteries using add on marine terminals.
Battery Terminal Cover, Red - 415111 - 354-415111F1
These Battery Terminal Covers are designed to insulate integral marine wing nut terminals protecting battery cables from corrosion and shorting. Constructed of injection molded PVC. These covers satisfy USCG and ABYC requirements for the prevention of accidental grounding of battery terminals. Color coded to avoid polarity misidentification. Will fit most marine batteries as well as automotive batteries using add on marine terminals.
Battery Terminal Cover, Black - 415117 - 354-415117F1
These Battery Terminal Covers are designed to insulate integral marine wing nut terminals protecting battery cables from corrosion and shorting. Constructed of injection molded PVC. These covers satisfy USCG and ABYC requirements for the prevention of accidental grounding of battery terminals. Color coded to avoid polarity misidentification. Will fit most marine batteries as well as automotive batteries using add on marine terminals.
Battery Terminal Cover, Black - 415112 - 354-415112F1
These Battery Terminal Covers are designed to insulate integral marine wing nut terminals protecting battery cables from corrosion and shorting. Constructed of injection molded PVC. These covers satisfy USCG and ABYC requirements for the prevention of accidental grounding of battery terminals. Color coded to avoid polarity misidentification. Will fit most marine batteries as well as automotive batteries using add on marine terminals.
Battery Box Strap - 54" - 415094-1 - 354-4150941F1
Battery Box Strap & Brackets includes a woven polypropylene strap, injection molded nylon buckle, two brackets, and four #8 FH fasteners.
Battery Box Strap - 38" - 415092-1 - 354-4150921F1
Battery Box Strap & Brackets includes a woven polypropylene strap, injection molded nylon buckle, two brackets, and four #8 FH fasteners.
Barrel Bolt - 222522-1 - 354-2225221F1
Constructed of durable chrome plated sand cast brass. These surface mounted Barrel Bolts provide additional security as either a primary or back-up locking system. Ideal for use on doors, gates, and cabinets. Appropriate for vertical, horizontal, left, or right-hand applications. In vertical use, notch in barrel holds bolt in locked position. Installs with six #6 FH fasteners (not included).
Bakelite Fuse/Terminal Block - 6 Gang - 420546-1 - 354-4205461F1
Combination multiple gang AGC Fuse/Terminal Blocks with brass fuse clips and screws. Accepts standard 1/4" x 1-1/4" AGC fuses. Fuses not included. This fuse block features a separate grounding terminal bar for circuit distribution to route and connect power or ground circuits. Useful for consolidating multiple wires or feeding multiple circuits. Installs with #8 RH fasteners (not included).
Bakelite Fuse/Terminal Block - 4 Gang - 420544-1 - 354-4205441F1
Combination multiple gang AGC Fuse/Terminal Blocks with brass fuse clips and screws. Accepts standard 1/4" x 1-1/4" AGC fuses. Fuses not included. This fuse block features a separate grounding terminal bar for circuit distribution to route and connect power or ground circuits. Useful for consolidating multiple wires or feeding multiple circuits. Installs with #8 RH fasteners (not included).
Baitwell Plugs 3/4" 45 Piece Pop Display - 520094-5 - 354-5200945F1
Place our POP displays on your counter or hang with the included peg hook rack to meet your customer's small items demands. Stamped brass/nitrile.
Ato/Atc Fuse - Mixed Kit - 445190-1 - 354-4451901F1
Kit contains 5ea: 3, 5, 7.5, 10, 15 and 20 amp fuses.
Anti-Rattle Window Fastener - 322210-1 - 354-3222101F1
Sand cast brass chrome plated. Carded.
Antenna Bracket - 329130-1 - 354-3291301F1
Four-way ratchet design with handle, for side or deck mounting. Corrosion resistant injection molded nylon construction. This bracket will accept any standard antenna with 1"-14 threads. Not recommended for whips over 8' in self-supporting mode. Installs with four ¼" FH fasteners (not included). Clamshell.
Adjustable Wiper Arm - 413124S-1 - 354-413124S1F1
Stainless steel adjustable wiper arms provide long life and reliability in all conditions.
Adjustable Wiper Arm - 413120S-1 - 354-413120S1F1
Stainless steel adjustable wiper arms provide long life and reliability in all conditions.
Adjustable Wiper Arm - 413118S-1 - 354-413118S1F1
Stainless steel adjustable wiper arms provide long life and reliability in all conditions.
Adjustable Wiper Arm - 413114S-1 - 354-413114S1F1
Stainless steel adjustable wiper arms provide long life and reliability in all conditions.
Adjustable Wiper Arm - 413111S-1 - 354-413111S1F1
Stainless steel adjustable wiper arms provide long life and reliability in all conditions.
Adjustable Telescoping Boat Hook - 491036-1 - 354-4910361F1
Constructed of high quality, durable, marine grade aluminum tubing with a threaded end attachment and comfort grip handle. Includes a four-point hook attachment coated in soft, over-molded rubber to protect your boat from scuffs and scratches. Its buoyant design keeps the boat hook afloat for more than 5 minutes. The bright orange rubber tip is highly visible and removes for accessory attachment.
Adjustable Telescoping Boat Hook - 491034-1 - 354-4910341F1
Constructed of high quality, durable, marine grade aluminum tubing with a threaded end attachment and comfort grip handle. Includes a four-point hook attachment coated in soft, over-molded rubber to protect your boat from scuffs and scratches. Its buoyant design keeps the boat hook afloat for more than 5 minutes. The bright orange rubber tip is highly visible and removes for accessory attachment.
Adjustable Telescoping Boat Hook - 491024-1 - 354-4910241F1
Constructed of high quality, durable, marine grade aluminum tubing with a threaded end attachment and comfort grip handle. Includes a four-point hook attachment coated in soft, over-molded rubber to protect your boat from scuffs and scratches. Its buoyant design keeps the boat hook afloat for more than 5 minutes. The bright orange rubber tip is highly visible and removes for accessory attachment.
Adjustable Telescoping Boat Hook - 491021-1 - 354-4910211F1
Constructed of high quality, durable, marine grade aluminum tubing with a threaded end attachment and comfort grip handle. Includes a four-point hook attachment coated in soft, over-molded rubber to protect your boat from scuffs and scratches. Its buoyant design keeps the boat hook afloat for more than 5 minutes. The bright orange rubber tip is highly visible and removes for accessory attachment.
Adjustable Antenna Bracket - 329300-1 - 354-3293001F1
Ratchet mount antenna bracket with handle, for side or deck mounting. Die cast zinc construction with mirror finish chrome plating. This bracket will accept any standard antenna with 1"-14 threads. Designed with an integral feed system for Loran cable. Installs with four ¼" fasteners not included. Recommended for freshwater use.
Adjustable Antenna Base - 329230-1 - 354-3292301F1
Ratchet mount antenna bracket with handle, for side or deck mounting. Investment cast 316 stainless steel construction with dual swiveling mounts for full adjustability. This bracket will accept any standard antenna with 1"-14 threads. Designed with an integral feed system for Loran cable. Installs with four ¼" FH fasteners not included.
Adjustable Angle Deck Hinge - 270260-1 - 354-2702601F1
These Top Mount Hinge Fittings are designed to mount horizontally and attach an eye end in Bimini top applications. 180° Adjustable Hinge allows universal mounting at almost any angle including vertical mounting. Corrosion resistant investment cast 316 stainless steel construction. These hinges install with two #10 FH fasteners (not included). 1/4" pin size.
Add A Snap White 4" 2/Pk - 299204W-1 - 354-299204W1F1
Allows you to easily add length on hard to reach snaps from shrunken material. Nickel Plated Brass/Nylon.
Add A Snap White 2.5" 2/Pk - 299202W-1 - 354-299202W1F1
Allows you to easily add length on hard to reach snaps from shrunken material. Nickel Plated Brass/Nylon.
Add A Snap White 1-1/2" 2/Pk - 299201W-1 - 354-299201W1F1
Allows you to easily add length on hard to reach snaps from shrunken material. Nickel Plated Brass/Nylon.
Add A Snap Black 4" 2/Pk - 299204B-1 - 354-299204B1F1
Allows you to easily add length on hard to reach snaps from shrunken material. Nickel Plated Brass/Nylon.
Add A Snap Black 2.5" 2/Pk - 299202B-1 - 354-299202B1F1
Allows you to easily add length on hard to reach snaps from shrunken material. Nickel Plated Brass/Nylon.
Add A Snap Black 1-1/2" 2/Pk - 299201B-1 - 354-299201B1F1
Allows you to easily add length on hard to reach snaps from shrunken material. Nickel Plated Brass/Nylon.
Accu-Mix Oil To Gas Measuring Bottle - 588614 - 354-588614F1
Plastic. Accurately measures the correct oil to gas mixture for all 2-cycle engines. Mixtures of 24-1, 33-1, 40-1, 50-1 and 100-1 ratios are shown on the see-thru bottle for accurate measuring in both liters and gallons.
Abs Side Mount Rod Holder-9" - 325140-1 - 354-3251401F1
Side Mount Rod Holders are constructed of injection molded polypropylene with 304 stainless steel mounting brackets. Accommodates rods up to 1-3/4" in diameter. Installs with four #8 RH fasteners (not included).
Abs Drink Holder, Black - 588000 - 354-588000F1
Flush Mount Drink Holders accommodate drink containers up to 2-7/8 in diameter and require a 3" diameter hole for installation. 2" depth. Impact resistant injection molded ABS construction.
Abs 5 Slot Vnt-Black - 337291 - 354-337291F1
These Louvered Vents are constructed of impact resistant injection molded ABS and are designed to be used in conjunction with a collector box to facilitate air intake and exhaust. Installs with eight #8 FH fasteners (not included). Avoid contact with acetone or strong solvents.
Abs 5 Slot Ventilator - White - 337290 - 354-337290F1
These Louvered Vents are constructed of impact resistant injection molded ABS and are designed to be used in conjunction with a collector box to facilitate air intake and exhaust. Installs with eight #8 FH fasteners (not included). Avoid contact with acetone or strong solvents.
90° Rectangular Base - 286190-1 - 354-2861901F1
Constructed of chrome plated die cast zinc. These Rail Base Fittings are recommended for freshwater use. Installs to deck with #10 FH fasteners (not included). Fittings can be attached to railing with included set screws or can be pop riveted using stainless or aluminum rivets. For use with 7/8 OD stainless tubing with a wall thickness of 0.049".
90° Angle Brackets, Pr. - 221315-1 - 354-2213151F1
A corrosion resistant 304 stainless steel bracket for 90° connections. Installs with four #8 FH fasteners (not included).
90° Angle Brackets, Pr. - 221310-1 - 354-2213101F1
A corrosion resistant 304 stainless steel bracket for 90° connections. Installs with four #8 FH fasteners (not included).
90° Angle Brackets, Pr. - 221305-1 - 354-2213051F1
A corrosion resistant 304 stainless steel bracket for 90° connections. Installs with four #8 FH fasteners (not included).
90 Deg. Tee - 296090-1 - 354-2960901F1
Constructed of chrome plated die cast zinc. These Rail Tees, Elbows, and Bow Forms are recommended for freshwater use. Fittings can be attached to railing with set screws or can be pop riveted using stainless or aluminum rivets.. For use with 7/8 OD stainless tubing with a wall thickness of 0.049".
90 Deg Inside Eye End White 2/Cd - 273351-1 - 354-2733511F1
The Side Mount Eye End used in conjunction with an Eye Mount Bracket converts standard internal eyes into quick release fittings. These 90° eye ends fit 3/4" OD tubing. Bracket installs with two #8 FH fasteners (not included). Constructed of UV stabilized injection molded nylon.
90 Deg Inside Eye End Black 2/Cd - 273350-1 - 354-2733501F1
The Side Mount Eye End used in conjunction with an Eye Mount Bracket converts standard internal eyes into quick release fittings. These 90° eye ends fit 3/4" OD tubing. Bracket installs with two #8 FH fasteners (not included). Constructed of UV stabilized injection molded nylon.
8 Led Festoon Bulb 1-3/4, 1/Cd - 442245-1 - 354-4422451F1
Nickel Plated Brass. 12V, 30 mA
60° Rectangular Base - 286160-1 - 354-2861601F1
Constructed of chrome plated die cast zinc. These Rail Base Fittings are recommended for freshwater use. Installs to deck with #10 FH fasteners (not included). Fittings can be attached to railing with included set screws or can be pop riveted using stainless or aluminum rivets. For use with 7/8 OD stainless tubing with a wall thickness of 0.049".
60" Nylon Gear Hammock - 671100-1 - 354-6711001F1
This Gear Hammock is great for ventilated, suspended storage. Perfect for bunk areas! 60" Length. Mildew and rot resistant nylon construction. Use with Hammock Hooks 671460 or 671461 (not included).
60 Deg. Tee Left Hand - 296160-1 - 354-2961601F1
Constructed of chrome plated die cast zinc. These Rail Tees, Elbows, and Bow Forms are recommended for freshwater use. Fittings can be attached to railing with set screws or can be pop riveted using stainless or aluminum rivets.. For use with 7/8 OD stainless tubing with a wall thickness of 0.049".
6 Switch Illiminated Switch Panel, Vertical - 422110-1 - 354-4221101F1
Aluminum Vertical Rocker Switch Panel is constructed of stamped anodized aluminum. Features six 15A 12VDC illuminated SPST On/Off rocker switches and six 10A 12VDC fuse holders. Individual circuit 10A max. 37A total. 12VDC. Includes a sheet of 20 preprinted decals to customize to your specific applications. Installs with six #6 RH fasteners (not included).
6 Led Festoon Bulb 1-3/4, 1/Cd - 442244-1 - 354-4422441F1
Nickel Plated Brass. 12V, 30 mA
6 Led Festoon Bulb 1-1/2, 1/Cd - 442237-1 - 354-4422371F1
Nickel Plated Brass. 12V, 20 mA
5/8" Stainless Steel Bow Shackle, Bulk - 147016 - 354-147016F1
Constructed of investment cast 316 stainless the D style shackle has straight sides with a U-shape rounded bottom. Designed for rigging applications with bidirectional loads. The U-shaped end can handle heavy loads, loads on the straight sides, however, may cause bending. We do not load rate cast shackles.
5/16" Stainless Steel Bow Shackle, Carded - 147008-1 - 354-1470081F1
Constructed of investment cast 316 stainless the D style shackle has straight sides with a U-shape rounded bottom. Designed for rigging applications with bidirectional loads. The U-shaped end can handle heavy loads, loads on the straight sides, however, may cause bending. We do not load rate cast shackles.
5/16" Stainless Shock Cord Clip W/Crimp, Pair - 657086-1 - 354-6570861F1
Shock Cord Hooks & Crimps can be used with bulk shock cords to create custom tie-down lengths. Corrosion resistant formed 304 stainless steel construction.
5/16" Nylon Shock Cord Clip, White, Pair - 652080-1 - 354-6520801F1
Shock Cord Clips can be used with bulk shock cords to create custom tie-down lengths. UV stabilized injection molded nylon construction.
5/16" Nylon Shock Cord Clip, Black, Bulk - 652081 - 354-652081F1
Shock Cord Clips can be used with bulk shock cords to create custom tie-down lengths. UV stabilized injection molded nylon construction.
5/16" Galvanized Anchor Shackles, 40 Pieces - 147808-5 - 354-1478085F1
Galvanized anchor shackles in a counter top display.
5 Rod Storage Rack - 325615-1 - 354-3256151F1
These Rod Storage Racks feature soft foam inserts securing rods and reducing potential damage from rough seas. Constructed of injection molded polypropylene they install with four #8 FH fasteners (not included). Holds 5 rods.
4" Stainless Strap Hinge - 205390-1 - 354-2053901F1
Consisting of two long narrow leaves extending from a single knuckle, strap hinges are commonly used for surface mounting dock box lids, fish holds, etc. Constructed of corrosion resistant 316 stainless steel. Good for outdoor applications where the hinges will be in frequent use. Installs with #8 fasteners (not included).
4" Stainless Steel Snap Hook - 151600-1 - 354-1516001F1
These carabiners feature an interlocking spring-loaded gate snap for quick attachment to a wide range of fixing points. Constructed of formed 316 stainless steel for corrosion resistance and durability. Multi-functional they can be used for lifting, rigging, and anchoring applications. For use with ropes, chains, straps, and small diameter cable.
4" Stainless Steel Snap Hook - 151600 - 354-151600F1
These carabiners feature an interlocking spring-loaded gate snap for quick attachment to a wide range of fixing points. Constructed of formed 316 stainless steel for corrosion resistance and durability. Multi-functional they can be used for lifting, rigging, and anchoring applications. For use with ropes, chains, straps, and small diameter cable.
4" Bronze Pelican Hook - 189785-1 - 354-1897851F1
Pelican hooks feature a hinged link that can be quickly secured or released by a sliding ring. Capable of being released under load these hooks are used as a removable fastener in lifeline applications where a gate is required. Eye allows line to be spliced directly to the hook or attached by way of a turnbuckle fork. Constructed of durable sand cast bronze or investment cast 316 stainless steel for maximum corrosion resistance and durability.
4-3/4" Stainless Steel Snap Hook - 151620-1 - 354-1516201F1
These carabiners feature an interlocking spring-loaded gate snap for quick attachment to a wide range of fixing points. Constructed of formed 316 stainless steel for corrosion resistance and durability. Multi-functional they can be used for lifting, rigging, and anchoring applications. For use with ropes, chains, straps, and small diameter cable.
4 Switch Illiminated Switch Panel, Vertical - 422010-1 - 354-4220101F1
Aluminum Vertical Rocker Switch Panel is constructed of stamped anodized aluminum. Features four 15A 12VDC illuminated SPST On/Off rocker switches and four 10A 12VDC fuse holders. Individual circuit 10A max. 37A total. 12VDC. Includes a sheet of 20 preprinted decals to customize to your specific applications. Installs with four #6 RH fasteners (not included).
4 Led Festoon Bulb 1-1/4, 1/Cd - 442232-1 - 354-4422321F1
Nickel Plated Brass. 12V, 20 mA
4 Led Festoon Bulb 1-1/2, 1/Cd - 442236-1 - 354-4422361F1
Nickel Plated Brass. 12V, 20 mA
3/8" Stainless Steel Bow Shackle, Carded - 147010-1 - 354-1470101F1
Constructed of investment cast 316 stainless the D style shackle has straight sides with a U-shape rounded bottom. Designed for rigging applications with bidirectional loads. The U-shaped end can handle heavy loads, loads on the straight sides, however, may cause bending. We do not load rate cast shackles.
3/8" Stainless Shock Cord Clip W/Crimp, Pair - 657106-1 - 354-6571061F1
Shock Cord Hooks & Crimps can be used with bulk shock cords to create custom tie-down lengths. Corrosion resistant formed 304 stainless steel construction.
3/8" Nylon Shock Cord Clip, White, Bulk - 652100 - 354-652100F1
Shock Cord Clips can be used with bulk shock cords to create custom tie-down lengths. UV stabilized injection molded nylon construction.
3/8" Galvanized Anchor Shackles, 30 Pieces - 147810-5 - 354-1478105F1
Galvanized anchor shackles in a counter top display.
3/16" Stainless Steel Bow Shackle, Carded - 147004-1 - 354-1470041F1
Constructed of investment cast 316 stainless the D style shackle has straight sides with a U-shape rounded bottom. Designed for rigging applications with bidirectional loads. The U-shaped end can handle heavy loads, loads on the straight sides, however, may cause bending. We do not load rate cast shackles.
3/16" Stainless Steel Bow Shackle, Bulk - 147004 - 354-147004F1
Constructed of investment cast 316 stainless the D style shackle has straight sides with a U-shape rounded bottom. Designed for rigging applications with bidirectional loads. The U-shaped end can handle heavy loads, loads on the straight sides, however, may cause bending. We do not load rate cast shackles.
3-Sided Boat Hooks Spinner Display - 916001-Bh3 - 354-916001Bh3F1
The Sea-Dog boat hook spinner displays put a supply of our complete boat hook product line in a compact, easy to service space on the showroom floor. Like the other Sea-Dog merchandisers, these displays make our "Build A Better Boat Hook" line of products stand out, and the upright spinning display makes it easy for your customers to see all of the features and benefits of this new line of products. Just buy the mixed pack of boat hooks and receive the spinner and signage for free. Quick and easy assembly.Includes:4491012-1 48"7491024-148"-96"5491034-136"-96"5491036-156"-144"4491021-124"-36" 491012-148"7491024-148"-96"5491034-136"-96"5491036-156"-144"4491021-124"-36"
3-Position Two Circuit Switch - 420410-1 - 354-4204101F1
One circuit, normally off, three position: Off/On/On. When pulled to the first position, the first circuit is activated. At the second position, both the first and the second circuit are both activated. Ideal for lighting such as cabin or running lights. Stamped brass. 15 amps @ 12 VDC. 3/8" x 1" Shaft.
3-1/4" Stainless Steel Snap Hook, 25/Display - 151580-5 - 354-1515805F1
These carabiners feature an interlocking spring-loaded gate snap for quick attachment to a wide range of fixing points. Constructed of formed 316 stainless steel for corrosion resistance and durability. Multi-functional they can be used for lifting, rigging, and anchoring applications. For use with ropes, chains, straps, and small diameter cable.
3-1/4" Stainless Steel Snap Hook - 151580-1 - 354-1515801F1
These carabiners feature an interlocking spring-loaded gate snap for quick attachment to a wide range of fixing points. Constructed of formed 316 stainless steel for corrosion resistance and durability. Multi-functional they can be used for lifting, rigging, and anchoring applications. For use with ropes, chains, straps, and small diameter cable.
3-1/4" Stainless Steel Snap Hook - 151580 - 354-151580F1
These carabiners feature an interlocking spring-loaded gate snap for quick attachment to a wide range of fixing points. Constructed of formed 316 stainless steel for corrosion resistance and durability. Multi-functional they can be used for lifting, rigging, and anchoring applications. For use with ropes, chains, straps, and small diameter cable.
3 Rod Storage Rack - 325613-1 - 354-3256131F1
These Rod Storage Racks feature soft foam inserts securing rods and reducing potential damage from rough seas. Constructed of injection molded polypropylene they install with four #8 FH fasteners (not included). Holds 3 rods.
3 Position Magneto Style Ignition/Starter Switch - 420383-1 - 354-4203831F1
Three Position Magneto Style Ignition Switch is constructed of polypropylene. For off, ignition, start, and choke functions. 13/16" diameter short shaft for a maximum panel thickness: 5/8. Six wire electrical connection. Ignition: 15A @ 12VDC. Solenoid: 30A @ 12VDC. Choke: 7A @ 12VDC. Includes two keys. Push to choke.
3 Position Magneto Style Ignition/Starter Switch - 420351-1 - 354-4203511F1
Three Position Magneto-Style Ignition Switch is constructed of stamped brass. For off, ignition, and start functions. Ignition (accessory) circuit is not activated in the solenoid (start) position. 13/16" diameter long shaft for a maximum panel thickness: 1-1/8. Five screw terminal electrical connection. Ignition: 15A @ 12VDC. Solenoid: 30A @ 12VDC. Includes two keys.
2" Spring Gate Snap Hook, Ss - 154250 - 354-154250F1
The spring gate snap hook features a quick connect wire lever gate and torsion spring. Constructed of marine grade 316 stainless steel for maximum corrosion resistance and durability. Simple to release lobster clasp style hook makes them ideal for applications where the snap needs to be frequently removed. Oblong design allows more gate clearance while the rounded edges prevent snagging.
2-3/8" Stainless Steel Snap Hook - 151560-1 - 354-1515601F1
These carabiners feature an interlocking spring-loaded gate snap for quick attachment to a wide range of fixing points. Constructed of formed 316 stainless steel for corrosion resistance and durability. Multi-functional they can be used for lifting, rigging, and anchoring applications. For use with ropes, chains, straps, and small diameter cable.
2-3/8" Stainless Steel Snap Hook - 151560 - 354-151560F1
These carabiners feature an interlocking spring-loaded gate snap for quick attachment to a wide range of fixing points. Constructed of formed 316 stainless steel for corrosion resistance and durability. Multi-functional they can be used for lifting, rigging, and anchoring applications. For use with ropes, chains, straps, and small diameter cable.
2 Wire Polarized Connector W/Leads - 426880-1 - 354-4268801F1
2-Wire Polarized Electrical Connector is an SAE type, two-prong plug and socket connector set. Polarized to assure the proper mating of circuits, reducing the chance of accidental reverse polarity. Color coded 16-gauge 12" lead wire with bullet-type contact pins. Weather resistant connectors are vibration and strain resistant. Use of dielectric grease recommended to further protect circuit from salt spray, debris, and corrosion. Constructed of injection molded PVC. 20A. 12-24VDC.
2 Pole Rod Storage Rack, White - 325028-1 - 354-3250281F1
Constructed from one-piece of injection molded UV stabilized polypropylene. Holds rods up to 1-3/4" in diameter. Includes four #8 stainless steel mounting screws. Has a built-in knife and lure holder.
12" Stainless Steel Stud Mount Hand Rails - 254112-1 - 354-2541121F1
Formed 304 stainless steel. 2" Rail height.
1/4" Stainless Steel Bow Shackle, Carded - 147006-1 - 354-1470061F1
Constructed of investment cast 316 stainless the D style shackle has straight sides with a U-shape rounded bottom. Designed for rigging applications with bidirectional loads. The U-shaped end can handle heavy loads, loads on the straight sides, however, may cause bending. We do not load rate cast shackles.
1/4" Stainless Shock Cord Clip W/Crimp, Pair - 657066-1 - 354-6570661F1
Shock Cord Hooks & Crimps can be used with bulk shock cords to create custom tie-down lengths. Corrosion resistant formed 304 stainless steel construction.
1/4" Nylon Shock Cord Clip, White, Pair - 652060-1 - 354-6520601F1
Shock Cord Clips can be used with bulk shock cords to create custom tie-down lengths. UV stabilized injection molded nylon construction.
1/4" Nylon Shock Cord Clip, Black, Bulk - 652061 - 354-652061F1
Shock Cord Clips can be used with bulk shock cords to create custom tie-down lengths. UV stabilized injection molded nylon construction.
1/4" Galvanized Anchor Shackles, 50 Pieces - 147806-5 - 354-1478065F1
Galvanized anchor shackles in a counter top display.
1/2" Stainless Steel Bow Shackle, Carded - 147012-1 - 354-1470121F1
Constructed of investment cast 316 stainless the D style shackle has straight sides with a U-shape rounded bottom. Designed for rigging applications with bidirectional loads. The U-shaped end can handle heavy loads, loads on the straight sides, however, may cause bending. We do not load rate cast shackles.
