Tiedown Engineering
Tie Down Engineering Dock Hardware - Inside Corner 8-1/4"L X 5"H - 26403 - 241-26403F1
Commercial grade. Should be used with one of the outside corners. Each leg has elongated holes for easy fit. 8-1/4"L x 5"H w/ 2-1/4" holes.
Tie Down Engineering Dock Hardware - Inside Corner 8-1/4"L X 5"H - 26417 - 241-26417F1
Commercial grade. Should be used with one of the outside corners. Each leg has elongated holes for easy fit. 8-1/4"L x 5"H w/ 3" holes.
Tie Down Engineering Dock Hardware - Inside Corner 8-1/4"L X 5"H - 26524 - 241-26524F1
Standard grade. Should be used with one of the outside corners. Each leg has elongated holes for easy fit. 8-1/4"L x 5"H w/ 2" holes.
Tie Down Engineering Dock Hardware - Inside Corner Pipe Holder, Commercial Grade - 26404 - 241-26404F1
Commercial grade. Should be used with one of the outside corners and has an internal pipe holder. 8-1/4"L x 5"H. Requires carriage bolt set for attaching. 2" Pipe.
Tie Down Engineering Dock Hardware - Inside Corner Pipe Holder, Commercial Grade - 26405 - 241-26405F1
Commercial grade. Should be used with one of the outside corners and has an internal pipe holder. 8-1/4"L x 5"H. Requires carriage bolt set for attaching. 2" Pipe.
Tie Down Engineering Dock Hardware - Male T Connector 5"L X 5"H - 26408 - 241-26408F1
Commercial grade w/ 1/2" tab. Use with Female T connector to attach fingers and ramps. Bolt set required for joint. Size: 5"L x 5"H.
Tie Down Engineering Dock Hardware - Male T Connector 5"L X 5"H - 26427 - 241-26427F1
Commercial Grade w/ 3/4" tab. Use with Female T connector to attach fingers and ramps. Bolt set required for joint. Size: 5" x 5".
Tie Down Engineering Dock Hardware - Male T Connector 5"L X 5"H - 26532 - 241-26532F1
Standard Grade w/ 1/2" tab. Use with Female T connector to attach fingers and ramps. Bolt set required for joint. Size: 5" x 5".
Tie Down Engineering Dock Hardware - Outside Corner End - 26402 - 241-26402F1
Commercial grade. Use this corner at ends of fingers and docks. Ideal for swim floats and ski jump corners. Each leg is 10"L x 5"H.
Tie Down Engineering Dock Hardware - Outside Corner End - 26428 - 241-26428F1
Commercial grade. Use this corner at ends of fingers and docks. Ideal for swim floats and ski jump corners. Each leg is 12-1/4"L x 5"H.
Tie Down Engineering Dock Hardware - Outside Corner End - 26523 - 241-26523F1
Standard grade. Use this corner at ends of fingers and docks. Ideal for swim floats and ski jump corners. Each leg is 10"L x 5"H.
Tie Down Engineering Dock Hardware - Outside Corner/Female 10"L X 5"H - 26400 - 241-26400F1
Commercial grade. Two 1/2" welded tabs. Use with a male outside corner. Each leg is 10"L x 5"H.
Tie Down Engineering Dock Hardware - Outside Corner/Female 10"L X 5"H - 26521 - 241-26521F1
Standard grade. Two 1/2" welded tabs. Use with a male outside corner. Each leg is 10"L x 5"H.
Tie Down Engineering Dock Hardware - Outside Corner/Male 10"L X 5"H - 25491 - 241-25491F1
Standard grade. Use with a female outside corner to connect docks end to end. Joint requires 3/4" bolt set or connector pin. Each leg is 10"L x 5" H. 1/2" Welded Tab.
Tie Down Engineering Dock Hardware - Outside Corner/Male 10"L X 5"H - 26418 - 241-26418F1
Standard grade. Use with a female outside corner to connect docks end to end. Joint requires 3/4" bolt set or connector pin. Each leg is 10"L x 5" H. 1/2" Welded Tab.
Tie Down Engineering Dock Hardware - Outside Corner/Male 10"L X 5"H - 26522 - 241-26522F1
Standard grade. Use with a female outside corner to connect docks end to end. Joint requires 3/4" bolt set or connector pin. Each leg is 10"L x 5" H. 1/2" Welded Tab.
Tie Down Engineering Dock Hardware - Outside Pipe Holder - 24280 - 241-24280F1
Standard grade. Bolts to outside of dock. Uses 2" pipe to hold dock in place. Carriage bolt set required for attaching.
Tie Down Engineering Dock Hardware - Outside Pipe Holder - 26411 - 241-26411F1
Commercial grade. Bolts to outside of dock. Uses 2" pipe to hold dock in place. Carriage bolt set required for attaching.
Tie Down Engineering Dock Hardware - Piling Hoop And Roller Assembly, Commercial Grade - 26415 - 241-26415F1
Piling hoop & roller intended for areas with a lot of wind, current or tidal action. Combines the Piling hoop (26412) and roller assembly (26414) to make up for the up and down movement. For pilings up to 12" in diameter.
Tie Down Engineering Dock Hardware - Steel Chain Pile Holder, Commercial Grade - 26419 - 241-26419F1
For use as a pile holder with 3/8" galvanized chain and shackles. Can be adjusted for various pile diameters. Size: 20-1/4" x 4-1/4" x 4-1/4" x 1/4" Steel.
Tie Down Engineering Dock Hardware - Washer Plate - 24284 - 241-24284F1
Standard grade. Should be used with every Angle. Two required for each Angle. 1-1/2"L x 5"H.
Tie Down Engineering Dock Hardware - Washer Plate - 26409 - 241-26409F1
Commercial grade. Should be used with every Angle. Two required for each Angle. 1-1/2"L x 5"H.
Tie Down Engineering Dock Side Cross Beam Extension - 86916 - 241-86916F1
With the addition of the Cross Beam 28 Extension, the cross beam used in the Clamp Receiver with Cross Beam or the Slotted Receiver with Cross Beam can be lengthened for use on docks that are six feet wide.
Tie Down Engineering Dock Side Cross Beam Extension - 86934 - 241-86934F1
With the addition of the Cross Beam 28 Extension, the cross beam used in the Clamp Receiver with Cross Beam or the Slotted Receiver with Cross Beam can be lengthened for use on docks that are six feet wide.
Tie Down Engineering Dock Side Mounting Base - Magma Grill Kettle - 86913 - 241-86913F1
This mounting bracket provides secure mounting support for Magma's Kettle grills. Requires 1 receiver.
Tie Down Engineering Dock Side Slotted Receiver With Cross Beam - 86901 - 241-86901F1
The Slotted Style Receiver with the cross beam mounting bracket provides a secure mounting solution for solid side rail docks.The assembly mounts on the side rails of solid rail style docks and is secured to the side rails with two bolts on each side. Includes one slotted receiver with cross beam.
Tie Down Engineering Fluted Zinc Plated Shackle Bolts With Nuts For Use With Spring Hanger Brackets (2 Per Pack) - 86250 - 241-86250F1
For use with spring hanger brackets. Fluting prevents the bolt from turning, which can wear hanger brackets. Grade 5 steel. 9/16" x 3" bolts with nuts.
Tie Down Engineering Front Spring Hanger - 86274 - 241-86274F1
Solid steel hangers that can be used on slipper and double eye springs that are mounted on 1,000-3,500 lb. capacity, medium-duty axles. Pre-drilled for 9/16" bolt.
Tie Down Engineering Galvanized Dock Ladder - 28273 - 241-28273F1
Steps are galvanized for extra protection. Protects against rust and corrosion in salt water.
Tie Down Engineering Galvanized Dock Ladder - 28274 - 241-28274F1
Steps are galvanized for extra protection. Protects against rust and corrosion in salt water.
Tie Down Engineering Galvanized Dock Ladder - 28275 - 241-28275F1
Steps are galvanized for extra protection. Protects against rust and corrosion in salt water.
Tie Down Engineering Galvanized Roller Bunk - Sold As Pair - 86117 - 241-86117F1
Replace bunk boards with these roller bunks. Heavy-duty galvanized steel frame provides full hull support. Roller bunks can be adjusted vertically with optional bolster support swivel brackets. Does not include mounting hardware.
Tie Down Engineering Galvanized Roller Bunk - Sold As Pair - 86118 - 241-86118F1
Replace bunk boards with these roller bunks. Heavy-duty galvanized steel frame provides full hull support. Roller bunks can be adjusted vertically with optional bolster support swivel brackets. Does not include mounting hardware.
Tie Down Engineering Galvanized Roller Bunk - Sold As Pair - 86145 - 241-86145F1
Replace bunk boards with these roller bunks. Heavy-duty galvanized steel frame provides full hull support. Roller bunks can be adjusted vertically with optional bolster support swivel brackets. Does not include mounting hardware.
Tie Down Engineering Galvanized Roller Bunk - Sold As Pair - 86157 - 241-86157F1
Replace bunk boards with these roller bunks. Heavy-duty galvanized steel frame provides full hull support. Roller bunks can be adjusted vertically with optional bolster support swivel brackets. Does not include mounting hardware.
Tie Down Engineering Galvanized Roller Shaft W/Pal Nuts - 86184 - 241-86184F1
Packaged roller shaft/pal nut combinations make for easier consumer purchases. Roller shafts come with roller shaft and 2 pal nuts.
Tie Down Engineering Galvanized Roller Shaft W/Pal Nuts - 86185 - 241-86185F1
Packaged roller shaft/pal nut combinations make for easier consumer purchases. Roller shafts come with roller shaft and 2 pal nuts.
Tie Down Engineering Galvanized Roller Shaft W/Pal Nuts - 86186 - 241-86186F1
Packaged roller shaft/pal nut combinations make for easier consumer purchases. Roller shafts come with roller shaft and 2 pal nuts.
Tie Down Engineering Galvanized Roller Shaft W/Pal Nuts - 86187 - 241-86187F1
Packaged roller shaft/pal nut combinations make for easier consumer purchases. Roller shafts come with roller shaft and 2 pal nuts.
Tie Down Engineering Galvanized Roller Shaft W/Pal Nuts - 86188 - 241-86188F1
Packaged roller shaft/pal nut combinations make for easier consumer purchases. Roller shafts come with roller shaft and 2 pal nuts.
Tie Down Engineering Galvanized Roller Shaft W/Pal Nuts - 86189 - 241-86189F1
Packaged roller shaft/pal nut combinations make for easier consumer purchases. Roller shafts come with roller shaft and 2 pal nuts.
Tie Down Engineering Galvanized Steel 7 X 19 Winch Cable With Galvanized Latch Hook - 59379 - 241-59379F1
Made of galvanized steel 7 x 19 aircraft cable to handle heavy loads. Each cable is fitted with a heavy-duty galvanized latch hook, pull proof loop and a fastener end for replacement use on Powerwinch and other power electric winches.
Tie Down Engineering Galvanized Steel 7 X 19 Winch Cable With Galvanized Latch Hook - 59380 - 241-59380F1
Made of galvanized steel 7 x 19 aircraft cable to handle heavy loads. Each cable is fitted with a heavy-duty galvanized latch hook, pull proof loop and a fastener end for replacement use on Powerwinch and other power electric winches.
Tie Down Engineering Galvanized Steel 7 X 19 Winch Cable With Galvanized Latch Hook - 59385 - 241-59385F1
Made of galvanized steel 7 x 19 aircraft cable to handle heavy loads. Each cable is fitted with a heavy-duty galvanized latch hook, pull proof loop and a fastener end for replacement use on Powerwinch and other power electric winches.
Tie Down Engineering Galvanized Steel 7 X 19 Winch Cable With Galvanized Latch Hook - 59390 - 241-59390F1
Made of galvanized steel 7 x 19 aircraft cable to handle heavy loads. Each cable is fitted with a heavy-duty galvanized latch hook, pull proof loop and a fastener end for replacement use on Powerwinch and other power electric winches.
Tie Down Engineering Galvanized Steel 7 X 19 Winch Cable With Galvanized Latch Hook - 59395 - 241-59395F1
Made of galvanized steel 7 x 19 aircraft cable to handle heavy loads. Each cable is fitted with a heavy-duty galvanized latch hook, pull proof loop and a fastener end for replacement use on Powerwinch and other power electric winches.
Tie Down Engineering Galvanized Steel 7 X 19 Winch Cable With Galvanized Latch Hook - 59400 - 241-59400F1
Made of galvanized steel 7 x 19 aircraft cable to handle heavy loads. Each cable is fitted with a heavy-duty galvanized latch hook, pull proof loop and a fastener end for replacement use on Powerwinch and other power electric winches.
Tie Down Engineering Galvanized Steel Panel Bracket - 86150 - 241-86150F1
One piece, heavy-duty, hot dipped galvanized 11 gauge steel. Specifically designed to support keel rollers. Slots accept 7/16" or 1/2" diameter bolts and provide vertical adjustment. Roller shaft diameter can be 1/2" or 5/8". Bracket is 4-3/8" W. Roller size is 4".
Tie Down Engineering Galvanized Steel Panel Bracket - 86151 - 241-86151F1
One piece, heavy-duty, hot dipped galvanized 11 gauge steel. Specifically designed to support keel rollers. Slots accept 7/16" or 1/2" diameter bolts and provide vertical adjustment. Roller shaft diameter can be 1/2" or 5/8". Bracket is 5-3/8" W. Roller size is 5".
Tie Down Engineering Galvanized Steel Panel Bracket - 86152 - 241-86152F1
One piece, heavy-duty, hot dipped galvanized 11 gauge steel. Specifically designed to support keel rollers. Slots accept 7/16" or 1/2" diameter bolts and provide vertical adjustment. Roller shaft diameter can be 1/2" or 5/8". BRacket is 8-3/8" W. Roller size is 6".
Tie Down Engineering Galvanized Steel Panel Bracket - 86153 - 241-86153F1
One piece, heavy-duty, hot dipped galvanized 11 gauge steel. Specifically designed to support keel rollers. Slots accept 7/16" or 1/2" diameter bolts and provide vertical adjustment. Roller shaft diameter can be 1/2" or 5/8". Bracket is 12-3/8" W. Roller size is 12".
Tie Down Engineering Galvanized Steel Panel Bracket - 86155 - 241-86155F1
One piece, heavy-duty, hot dipped galvanized 11 gauge steel. Specifically designed to support keel rollers. Slots accept 7/16" or 1/2" diameter bolts and provide vertical adjustment. Roller shaft diameter can be 1/2" or 5/8". Bracket is 10-3/8" W. Roller size is 10".
Tie Down Engineering Galvanized Steel Panel Bracket Assembly - 86279 - 241-86279F1
Assemblies include amber or black poly vinyl keel roller, shaft & pal nuts. Brackets are one piece, heavy-duty hot dip galvanized 11 gauge steel, specifically designed to support keel rollers. Bracket 5-3/8". Roller size 5".
Tie Down Engineering Galvanized Steel Panel Bracket Assembly - 86280 - 241-86280F1
Assemblies include amber or black poly vinyl keel roller, shaft & pal nuts. Brackets are one piece, heavy-duty hot dip galvanized 11 gauge steel, specifically designed to support keel rollers. Bracket is 8-3/8". Roller size is 8".
Tie Down Engineering Galvanized Steel Panel Bracket Assembly - 86281 - 241-86281F1
Assemblies include amber or black poly vinyl keel roller, shaft & pal nuts. Brackets are one piece, heavy-duty hot dip galvanized 11 gauge steel, specifically designed to support keel rollers. Bracket 10-3/8". Roller size is 10".
Tie Down Engineering Galvanized Steel Panel Bracket Assembly - 86282 - 241-86282F1
Assemblies include amber or black poly vinyl keel roller, shaft & pal nuts. Brackets are one piece, heavy-duty hot dip galvanized 11 gauge steel, specifically designed to support keel rollers. Bracket 12-3/8". Roller size is 12".
Tie Down Engineering Galvanized Steel Panel Bracket Assembly - 86414 - 241-86414F1
Assemblies include amber or black poly vinyl keel roller, shaft & pal nuts. Brackets are one piece, heavy-duty hot dip galvanized 11 gauge steel, specifically designed to support keel rollers. Bracket 5-3/8" with 5" roller size.
Tie Down Engineering Galvanized Steel Panel Bracket Assembly - 86415 - 241-86415F1
Assemblies include amber or black poly vinyl keel roller, shaft & pal nuts. Brackets are one piece, heavy-duty hot dip galvanized 11 gauge steel, specifically designed to support keel rollers. Bracket 8-3/8" with 8" roller size.
Tie Down Engineering Galvanized Steel Panel Bracket Assembly - 86416 - 241-86416F1
Assemblies include amber or black poly vinyl keel roller, shaft & pal nuts. Brackets are one piece, heavy-duty hot dip galvanized 11 gauge steel, specifically designed to support keel rollers. Bracket 10-3/8" with 10" roller size.
Tie Down Engineering Galvanized Steel Panel Bracket Assembly - 86417 - 241-86417F1
Assemblies include amber or black poly vinyl keel roller, shaft & pal nuts. Brackets are one piece, heavy-duty hot dip galvanized 11 gauge steel, specifically designed to support keel rollers. Bracket 12-3/8" with 12" roller size.
Tie Down Engineering Galvanized Steel Panel Bracket Assembly - 86430 - 241-86430F1
Assemblies include black rubber keel roller, shaft & pal nuts. Brackets are one piece, heavy-duty hot dip galvanized 11 gauge steel, specifically designed to support keel rollers. Bracket 5-3/8" with 5" roller size.
Tie Down Engineering Galvanized Steel Panel Bracket Assembly - 86431 - 241-86431F1
Assemblies include black rubber keel roller, shaft & pal nuts. Brackets are one piece, heavy-duty hot dip galvanized 11 gauge steel, specifically designed to support keel rollers. Bracket 8-3/8" with 8" roller size.
Tie Down Engineering Galvanized Steel Panel Bracket Assembly - 86432 - 241-86432F1
Assemblies include black rubber keel roller, shaft & pal nuts. Brackets are one piece, heavy-duty hot dip galvanized 11 gauge steel, specifically designed to support keel rollers. Bracket 10-3/8" with 10" roller size.
Tie Down Engineering Galvanized Steel Panel Bracket Assembly - 86433 - 241-86433F1
Assemblies include black rubber keel roller, shaft & pal nuts. Brackets are one piece, heavy-duty hot dip galvanized 11 gauge steel, specifically designed to support keel rollers. Bracket 12-3/8" with 12" roller size.
Tie Down Engineering Galvanized U-Bolt Kit - 86220 - 241-86220F1
Used for mounting brackets and component to trailer frame. Includes galvanized U-bolts, flat washers, lock washers and nuts.
Tie Down Engineering Galvanized U-Bolt Kit - 86221 - 241-86221F1
Used for mounting brackets and component to trailer frame. Includes galvanized U-bolts, flat washers, lock washers and nuts.
Tie Down Engineering Galvanized U-Bolt Kit - 86222 - 241-86222F1
Used for mounting brackets and component to trailer frame. Includes galvanized U-bolts, flat washers, lock washers and nuts.
Tie Down Engineering Galvanized U-Bolt Kit - 86223 - 241-86223F1
Used for mounting brackets and component to trailer frame. Includes galvanized U-bolts, flat washers, lock washers and nuts.
Tie Down Engineering Galvanized U-Bolt Kit - 86224 - 241-86224F1
Used for mounting brackets and component to trailer frame. Includes galvanized U-bolts, flat washers, lock washers and nuts.
Tie Down Engineering Galvanized U-Bolt Kit - 86225 - 241-86225F1
Used for mounting brackets and component to trailer frame. Includes galvanized U-bolts, flat washers, lock washers and nuts.
Tie Down Engineering Galvanized U-Bolt Kit - 86226 - 241-86226F1
Used for mounting brackets and component to trailer frame. Includes galvanized U-bolts, flat washers, lock washers and nuts.
Tie Down Engineering Galvanized U-Bolt Kit - 86227 - 241-86227F1
Used for mounting brackets and component to trailer frame. Includes galvanized U-bolts, flat washers, lock washers and nuts.
Tie Down Engineering Guide On'S - Sold As Pair With Mounting Hardware Included - 86102 - 241-86102F1
Mount these 13" rubber rollers on top or beneath frame for added adjustment. Hot dip galvanized mounts adjust for widths to 13" on each side. Fits frame up to 4". Hardware included. Sold in pairs.
Tie Down Engineering Guide On'S - Sold As Pair With Mounting Hardware Included - 86103 - 241-86103F1
PVC pipe guides the boat on safely and gives a visual aid when backing an empty trailer. The non-mar PVC pipe is braced inside with metal tubing going 20" up into the tube, adding strength and impact resistance. All hardware included and is galvanized for corrosion protection. Sold in pairs.
Tie Down Engineering Guide On'S - Sold As Pair With Mounting Hardware Included - 86104 - 241-86104F1
Hull Sav'r boat guides are designed to absorb impact of the hull and protect the trailer's finish. Poly vinyl protector pads eliminate metal to metal contact and prevents rust. Shock dampener and wedge dampener can be configured for 0, 7 or 14 degree hull angles. All hardware included. Universal fit for 3" & 4" trailer frame size. Sold in pairs.
Tie Down Engineering Guide On'S - Sold As Pair With Mounting Hardware Included - 86105 - 241-86105F1
Adapts to all tube and channel trailer frames. Hot dip galvanized for lasting protection. Heavy duty steel component parts. Heavy duty 4' x 2-3/8" PVC guide tubes, 16" of adjustment. All hardware included. Sold in pairs.
Tie Down Engineering Guide On'S - Sold As Pair With Mounting Hardware Included - 86106 - 241-86106F1
Roller angle adjusts to angle of hull; 16" of adjustment (8" each side). Hot dip galvanized steel. One piece adjustable clamp with U-bolt. Fits all channel and tube frames up to 5". Sold in pairs.
Tie Down Engineering Guide On'S - Sold As Pair With Mounting Hardware Included - 86119 - 241-86119F1
PVC pipe guides the boat on safely and gives a visual aid when backing an empty trailer. The non-mar PVC pipe is braced inside with metal tubing going 20" up into the tube, adding strength and impact resistance. All hardware included and is galvanized for corrosion protection. Sold in pairs.
Tie Down Engineering Guide On'S - Sold As Pair With Mounting Hardware Included - 86148 - 241-86148F1
Soft poly vinyl cradles your boat protecting it from scratches and dings. All hardware included. Universal fit for 3" and 4" trailer frame sizes. Sold in pairs.
Tie Down Engineering Guide On'S - Sold As Pair With Mounting Hardware Included - 86200 - 241-86200F1
Hull Sav'r boat guides are designed to absorb impact of the hull and protect the trailer's finish. Poly vinyl protector pads eliminate metal to metal contact and prevents rust. All hardware included. Universal fit for 3 & 4" trailer frame sizes, channel or tube. Sold in pairs.
Tie Down Engineering Guide On'S - Sold As Pair With Mounting Hardware Included - 86201 - 241-86201F1
Hull Sav'r boat guides are designed to absorb impact of the hull and protect the trailer's finish. Poly vinyl protector pads eliminate metal to metal contact and prevents rust. All hardware included. Universal fit for 3 & 4" trailer frame sizes, channel or tube. Sold in pairs.
Tie Down Engineering Guide On'S - Sold As Pair With Mounting Hardware Included - 86440 - 241-86440F1
PVC pipe guides the boat on safely and gives a visual aid when backing an empty trailer. The non-mar PVC pipe is braced inside with metal tubing going 20" up into the tube, adding strength and impact resistance. All hardware included and is galvanized for corrosion protection. Sold in pairs.
Tie Down Engineering Guide On'S - Sold As Pair With Mounting Hardware Included - 86441 - 241-86441F1
PVC pipe guides the boat on safely and gives a visual aid when backing an empty trailer. The non-mar PVC pipe is braced inside with metal tubing going 20" up into the tube, adding strength and impact resistance. All hardware included and is galvanized for corrosion protection. Sold in pairs.
Tie Down Engineering Guide On'S - Sold As Pair With Mounting Hardware Included - 86465 - 241-86465F1
Bright orange end caps on these PVC guides gives a brighter target when loading a pontoon boat. The guide posts are designed to be mounted between the pontoons. Made of 1-1/2" square, 16-gauge steel tubing and covered by 2"x 20" PVC pipe. Galvanized guide posts extend fully into the PVC tube for additional strength. Mounts to trailer cross members up to 2" wide by 2" high. All mounting hardware included.
Tie Down Engineering Guide On'S - Sold As Pair With Mounting Hardware Included - 86466 - 241-86466F1
Ideal for jon boats, bass boats and personal watercraft. The guide posts are made of 1-1/2" square, 16-gauge steel tubing and galvanized for long life. Guide covers are made from high impact non-marking molded PVC. Low Rider Guide On's give you the extra advantage of high strength and great looks for your trailer. Mounts to trailer cross members 2"x 2", 2"x 3" and 2"x 4" frames. All mounting hardware included.
Tie Down Engineering Guide On'S - Sold As Pair With Mounting Hardware Included - 86467 - 241-86467F1
Ideal for larger pontoon boats. These guides are designed for rough water loading where high impact guides are required. The guide posts are hot dip galvanized for long life with covers made from high impact non-marking molded PVC. The guide posts are designed to be mounted between the pontoons. Made of 2-1/2" square, 13-gauge steel tubing. Mounts to trailer cross members up to 2" wide by 2" high. All mounting hardware included. Sold in pairs.
Tie Down Engineering Guide On'S - Sold As Pair With Mounting Hardware Included - 86468 - 241-86468F1
When the trailer is submerged, the PVC guide rises upward adding an additional 12" in sight with adjustable viewing sight of 24"- 36" overall height. Bright orange end caps on these PVC guides give you a brighter target when loading your pontoon boat. The guide posts are designed to be mounted between the pontoons. Made of 1-1/2" square, 16-gauge steel galvanized tubing and covered by 2"x 20" PVC pipe. Guide posts extend fully into the PVC tube for additional strength. All mounting hardware included.
Tie Down Engineering Hot Dip Galvanized Split Panel Brackets - Sold As Pair (L & R) - 81235 - 241-81235F1
Sold in pairs (right and left) to accommodate any size roller length. Slot allows vertical adjustment for stabilizing boat on trailer. Slots accept 7/16" or 1/2" bolts. Use 1/2" or 5/8" roller shaft.
Tie Down Engineering Hot Dipped Galvanized Keel Roller Assembly With 4" Rubber Roller - 86121 - 241-86121F1
Adjustable offset brackets mount on tongue for keel support. Complete with 4" rubber roller (for 2" wide tongue).
Tie Down Engineering Hot Dipped Galvanized Steel Bunk Bracket - 81225 - 241-81225F1
Heavy 11 gauge hot dipped galvanized steel brackets mount 2" bunks on edge. Slotted for vertical adjustment to standard or deep-V hulls.
Tie Down Engineering Hot Dipped Galvanized Steel Bunk Bracket - 81230 - 241-81230F1
Heavy 11 gauge hot dipped galvanized steel brackets mount 2" bunks on edge. Slotted for vertical adjustment to standard or deep-V hulls.
Tie Down Engineering Hot Dipped Galvanized Steel Bunk Bracket - 86149 - 241-86149F1
Heavy 11 gauge hot dipped galvanized steel brackets mount 2" bunks on edge. Slotted for vertical adjustment to standard or deep-V hulls.
Tie Down Engineering Hull Sav'R Black Rubber End Cap - 86476 - 241-86476F1
Black poly vinyl rollers are long lasting, will absorb shock, are cut resistant and will not mark your boat. Size 2" x 2" x 1/2" with 1/2" hole.
Tie Down Engineering Hull Sav'R Black Rubber End Cap - 86478 - 241-86478F1
Black poly vinyl rollers are long lasting, will absorb shock, are cut resistant and will not mark your boat. Size: 2-1/2" x 1-1/2" x 5/8" with 5/8" hole.
Tie Down Engineering Hull Sav'R Black Rubber Roller - 86480 - 241-86480F1
Black Spool Rubber Roller. Size 4" with 5/8" hole.
Tie Down Engineering Hull Sav'R Black Rubber Roller - 86481 - 241-86481F1
Black Spool Rubber Roller. Size 5" with 1/2" hole.
Tie Down Engineering Hull Sav'R Black Rubber Roller - 86482 - 241-86482F1
Black Spool Rubber Roller. Size 5" with 5/8" hole.
Tie Down Engineering Hull Sav'R Black Rubber Roller - 86483 - 241-86483F1
5" Black Rubber Center Guide Keel Roller with 5/8" Hole.
Tie Down Engineering Hull Sav'R Black Rubber Roller - 86484 - 241-86484F1
8" Rubber Center Guide Keel Roller with 5/8" hole.
Tie Down Engineering Hull Sav'R Black Rubber Roller - 86485 - 241-86485F1
10" Rubber Center Guide Keel Roller with 5/8" hole.
