Sea-Dog Line
Ss Boat Hook Clips, 3/4" - 1", Pr. - 491135-1 - 354-4911351F1
Boat Hook Clips fit boat hooks from 3/4" - 1" in diameter. Corrosion resistant stamped 304 stainless steel construction. Installs with two #8 RH fasteners (not included).
Ss Boat Hook Holder, 1-1/4", Pair - 491130-1 - 354-4911301F1
Stamped 304 stainless.
Ss Clevis Pin - 193606-1 - 354-1936061F1
Formed AISI 316 stainless steel. Carded
Ss Clevis Pin - 193608-1 - 354-1936081F1
Formed AISI 316 stainless steel. Carded
Ss Clevis Pin - 193610-1 - 354-1936101F1
Formed AISI 316 stainless steel. Carded
Ss Clevis Pin - 193611-1 - 354-1936111F1
Formed AISI 316 stainless steel. Carded
Ss Clevis Pin - 193612-1 - 354-1936121F1
Formed AISI 316 stainless steel. Carded
Ss Clevis Pin - 193614-1 - 354-1936141F1
Formed AISI 316 stainless steel. Carded
Ss Midget Vent 3-3/4" - 331375-1 - 354-3313751F1
Heavy-duty stamped 304 stainless steel midget vents feature a reinforced rim making them durable enough to stand on. Great for routing cables or wires through a hole or for covering thru-hull openings to shield water spray. Ideal for small lockers, they provide attractive cover for ventilation holes while also preventing odors. Three pre-drilled holes for a smooth screw on installation. #6 RH fasteners not included.
Ss Ring Buoy Bracket 4" Dia - 491240-1 - 354-4912401F1
can accommodate ring buoys up to 4" in width. Constructed of corrosion resistant 304 stainless steel for long life and durability. Installs with two 1/4" FH fasteners (not included).
Ss Ring Buoy Bracket 4" Dia, Bulk - 491240 - 354-491240F1
can accommodate ring buoys up to 4" in width. Constructed of corrosion resistant 304 stainless steel for long life and durability. Installs with two 1/4" FH fasteners (not included).
Ss Set Screws, 10/Cd - 299999-1 - 354-2999991F1
1/4" - 28 x 3/16" cone point hex drive. 304 Stainless steel.
Stainless 90 Deck Hinge - 270200-1 - 354-2702001F1
316 stainless steel. Packed one per card.
Stainless 90 Deck Hinge Remov - 270210-1 - 354-2702101F1
316 stainless steel. Packed one per card.
Stainless Bottle Opener - 588450-1 - 354-5884501F1
Investment cast 316 stainless steel.#6 FH fastener.
Stainless Butt Hinge-2 X 2"C - 201582-1 - 354-2015821F1
Corrosion resistant stamped 304 stainless steel, consist of two rectangular leaves that attach to the abutting surfaces of a door and door jamb. Installs with four #8 FH fasteners (not included).
Stainless Cam Lock - 221930-1 - 354-2219301F1
This cylindrical locking assembly features a pivot mechanism that will swivel to engage in a locked or open position merely by turning the cam assembly. Die cast zinc lock installs with back mounted 304 stainless steel nut. Comes complete with two locking arms for flush or offset installations and two matching keys. Keys are random so keyed alike cam locks cannot be guaranteed.
Stainless Diamond Eye Plate-3 - 88621 - 354-088621F1
Made from investment cast 316 stainless steel these corrosion resistant diamond eye plates are designed to create an attachment point. Great for tying off light loads inside or outside your boat. Use diamond eye plates to secure fenders, cargo net, etc. Installs with four 1/4" FH fasteners (not included).
Stainless Diamond Eye Plate-3 - 88622 - 354-088622F1
Made from investment cast 316 stainless steel these corrosion resistant diamond eye plates are designed to create an attachment point. Great for tying off light loads inside or outside your boat. Use diamond eye plates to secure fenders, cargo net, etc. Installs with four 1/4" FH fasteners (not included).
Stainless Door Button - 221670 - 354-221670F1
Stainless door button w/injection molded Constructed of corrosion resistant 304 stainless steel and injection molded nylon. These Door Stop Buttons are a sleek, simple and effective hardware solution to keep doors closed. Surface mount easily with four #8 FH fasteners (not included).
Stainless Door Button - 221670-1 - 354-2216701F1
Constructed of corrosion resistant 304 stainless steel and injection molded nylon. These Door Stop Buttons are a sleek, simple and effective hardware solution to keep doors closed. Surface mount easily with four #8 FH fasteners (not included).
Stainless Door Hinge - 201530-1 - 354-2015301F1
These Door Hinges are constructed of corrosion resistant stamped 304 stainless steel to withstand the harsh marine environment. Installs with six #8 FH fasteners (not included).
Stainless Fresh Water Inlet - 513110-1 - 354-5131101F1
Designed to provide a fresh water hookup to a pressurized water system while moored. Has standard female swivel hose connector. Complete with black plastic, water tight plug when not connected to on shore water. Pipe size: 1/2" FIPT x 3/4" FGHT.
Stainless Impeller Puller, Sm., 1-1/4" - 2-9/16" - 660040-1 - 354-6600401F1
Allows easier removal of flexible impellers from a pump. Tighten the side grips onto the impeller hub and turn the center screw shaft to pull the impeller out of the pump.
Stainless Oblong Eye Plate-3 1 - 88722 - 354-088722F1
Oblong pad eye plate fittings are constructed of marine grade investment cast 316 stainless steel, for strength and corrosion resistance. Multitude of uses. Mounting hardware sold separately.
Stainless Oblong Eye Plate-3 I - 88721 - 354-088721F1
Oblong pad eye plate fittings are constructed of marine grade investment cast 316 stainless steel, for strength and corrosion resistance. Multitude of uses. Mounting hardware sold separately.
Stainless Oblong Eye Plate-4 I - 88723 - 354-088723F1
Oblong pad eye plate fittings are constructed of marine grade investment cast 316 stainless steel, for strength and corrosion resistance. Multitude of uses. Mounting hardware sold separately.
Stainless Pontoon Gate Latch - 221880-1 - 354-2218801F1
Investment cast 316 stainless steel construction for corrosion resistance and durability. This gate latch is designed to be used with 1-1/4" square tubing. Ideal for pontoon gates. Installs with 1/4" thru bolt (not included).
Stainless Release Pin 1/4" X 1-1/2" - 193415 - 354-193415F1
Standard duty release pins are ideal for basic holding and removal applications that don't require a positive locking ball feature. Constructed of corrosion resistant formed 304 stainless steel, these quick release pins are activated by a push or pull motion. The detent ball depresses and springs up for "quick release" applications. This robust, durable design is suitable for repetitive-use applications. Ideal for anchor clevis fittings, hinge pins or to replace cotter pins where frequent removal is necessary. Includes split ring for attachment of optional lanyard.
Stainless Release Pin 1/4" X 1-1/2", Pr. - 193415-1 - 354-1934151F1
Standard duty release pins are ideal for basic holding and removal applications that don't require a positive locking ball feature. Constructed of corrosion resistant formed 304 stainless steel, these quick release pins are activated by a push or pull motion. The detent ball depresses and springs up for "quick release" applications. This robust, durable design is suitable for repetitive-use applications. Ideal for anchor clevis fittings, hinge pins or to replace cotter pins where frequent removal is necessary. Includes split ring for attachment of optional lanyard.
Stainless Release Pin 1/4" X 1" - 193410 - 354-193410F1
Standard duty release pins are ideal for basic holding and removal applications that don't require a positive locking ball feature. Constructed of corrosion resistant formed 304 stainless steel, these quick release pins are activated by a push or pull motion. The detent ball depresses and springs up for "quick release" applications. This robust, durable design is suitable for repetitive-use applications. Ideal for anchor clevis fittings, hinge pins or to replace cotter pins where frequent removal is necessary. Includes split ring for attachment of optional lanyard.
Stainless Release Pin 1/4" X 1", Pr. - 193410-1 - 354-1934101F1
Standard duty release pins are ideal for basic holding and removal applications that don't require a positive locking ball feature. Constructed of corrosion resistant formed 304 stainless steel, these quick release pins are activated by a push or pull motion. The detent ball depresses and springs up for "quick release" applications. This robust, durable design is suitable for repetitive-use applications. Ideal for anchor clevis fittings, hinge pins or to replace cotter pins where frequent removal is necessary. Includes split ring for attachment of optional lanyard.
Stainless Release Pin 1/4" X 2-1/16" - 193420 - 354-193420F1
Standard duty release pins are ideal for basic holding and removal applications that don't require a positive locking ball feature. Constructed of corrosion resistant formed 304 stainless steel, these quick release pins are activated by a push or pull motion. The detent ball depresses and springs up for "quick release" applications. This robust, durable design is suitable for repetitive-use applications. Ideal for anchor clevis fittings, hinge pins or to replace cotter pins where frequent removal is necessary. Includes split ring for attachment of optional lanyard.
Stainless Release Pin 1/4" X 2-1/16", Pr. - 193420-1 - 354-1934201F1
Standard duty release pins are ideal for basic holding and removal applications that don't require a positive locking ball feature. Constructed of corrosion resistant formed 304 stainless steel, these quick release pins are activated by a push or pull motion. The detent ball depresses and springs up for "quick release" applications. This robust, durable design is suitable for repetitive-use applications. Ideal for anchor clevis fittings, hinge pins or to replace cotter pins where frequent removal is necessary. Includes split ring for attachment of optional lanyard.
Stainless Release Pin 1/4" X 2-1/2" - 193425 - 354-193425F1
Standard duty release pins are ideal for basic holding and removal applications that don't require a positive locking ball feature. Constructed of corrosion resistant formed 304 stainless steel, these quick release pins are activated by a push or pull motion. The detent ball depresses and springs up for "quick release" applications. This robust, durable design is suitable for repetitive-use applications. Ideal for anchor clevis fittings, hinge pins or to replace cotter pins where frequent removal is necessary. Includes split ring for attachment of optional lanyard.
Stainless Release Pin 1/4" X 2-1/2", Pr. - 193425-1 - 354-1934251F1
Standard duty release pins are ideal for basic holding and removal applications that don't require a positive locking ball feature. Constructed of corrosion resistant formed 304 stainless steel, these quick release pins are activated by a push or pull motion. The detent ball depresses and springs up for "quick release" applications. This robust, durable design is suitable for repetitive-use applications. Ideal for anchor clevis fittings, hinge pins or to replace cotter pins where frequent removal is necessary. Includes split ring for attachment of optional lanyard.
Stainless Snap Handle Drain Plug, 1", 20 Pc Display - 520075-5 - 354-5200755F1
Stainless Snap Handle Drain Plug, 1"
Stainless Snap Handle Drain Plug, 1", Bulk - 520075-1 - 354-5200751F1
Stainless Snap Handle Drain Plug, 1"
Stainless Steel Cigarette/Char - 426352-1 - 354-4263521F1
Combination chart light and cigarette lighter with the flick of a switch. Stainless mounting plate. Chrome steel sockets should only be used on fresh water boats. Use #8FH fastener.
Stainless Steel Microphone Clip - 329990-1 - 354-3299901F1
Secure your microphone close to your radio with this one-piece corrosion resistant clip. Fits all standard microphones for hailers, VHF or CB radios. Fasteners not included.Carded.
Stainless Strap Hinge 4-1/8", Pair - 201134-1 - 354-2011341F1
Consisting of two long narrow leaves extending from a single knuckle, strap hinges are commonly used for surface mounting dock box lids, fish holds, etc. Constructed of corrosion 304 resistant stainless steel. Good for outdoor applications where the hinges will be in frequent use. Installs with #8 fasteners (not included).
Stainless Strap Hinge 6-1/8", Pair - 201136-1 - 354-2011361F1
Consisting of two long narrow leaves extending from a single knuckle, strap hinges are commonly used for surface mounting dock box lids, fish holds, etc. Constructed of corrosion resistant 304 stainless steel. Good for outdoor applications where the hinges will be in frequent use. Installs with #8 fasteners (not included).
Stainless Surface Mount Lift Ring - 221830-1 - 354-2218301F1
Constructed of corrosion resistant 304 stamped stainless steel. These ring pulls are ideal for use on doors, hatches, lazarettes, and dock boxes. Surface mounted for easy installation with four #10 FH fasteners (not included).
Stainless Surface Mount Lift Ring - 221831-1 - 354-2218311F1
Designed to keep your valuables protected, the Surface Mount Locking Ring Pull is ideal for hatches, deck plates, cabinets, and drawers. Constructed of corrosion resistant 304 stamped stainless steel with a die cast zinc lock. Ring is recessed for a flush, clean installation. Comes with two matching keys. Keys are random so requesting multiple rings keyed alike is not possible. Comes with two locking arms for flush or offset installations. Installs with back mounted threaded nut.
Steering Cable Boot, Bulk - 521700 - 354-521700F1
Durable molded rubber Steering Cable Boot protects the output end of all standard steering cables keeping dirt, debris, and moisture out and extending the service life of the cable. Includes two cable ties.
Steering Cable Boot, Carded - 521700-1 - 354-5217001F1
Durable molded rubber Steering Cable Boot protects the output end of all standard steering cables keeping dirt, debris, and moisture out and extending the service life of the cable. Includes two cable ties.
Straight Gas Tank Vent, Black Nylon - 357100-1 - 354-3571001F1
Gas Tank Vents provide the needed air flow to maintain proper fuel flow while filling and during use. Vents compensate for changes in tank level due to consumption, as well as temperature related expansion and contraction. Designed to prevent vacuum build-up during use, which can disrupt fuel delivery they also double as a pressure release valve for the gas tank. An integral 5/8" hose barb securely connects vent hose.
Straight Gas Tank Vent, Chrome Brass - 352010-1 - 354-3520101F1
Gas tank vents function to provide the needed air flow to maintain proper fuel flow while filling and during use. Vents compensate for changes in tank level due to consumption as well as temperature related expansion and contraction. Designed to prevent vacuum build up during use which can disrupt fuel delivery they also double as a pressure release valve for the gas tank. Two screens provide a barrier to keep unwanted contaminants from entering the tank. An integral 5/8" hose barb securely connects vent hose.
Straight Gas Tank Vent, Chrome Zinc, Carded - 352110-1 - 354-3521101F1
Gas tank vents function to provide the needed air flow to maintain proper fuel flow while filling and during use. Vents compensate for changes in tank level due to consumption as well as temperature related expansion and contraction. Designed to prevent vacuum build up during use which can disrupt fuel delivery they also double as a pressure release valve for the gas tank. Two screens provide a barrier to keep unwanted contaminants from entering the tank. An integral 5/8" hose barb securely connects vent hose.
Straight Gas Tank Vent, Chrome/Zinc - 352100-1 - 354-3521001F1
Gas Tank Vents provide the needed air flow to maintain proper fuel flow while filling and during use. Vents compensate for changes in tank level due to consumption, as well as temperature related expansion and contraction. Designed to prevent vacuum build-up during use, which can disrupt fuel delivery they also double as a pressure release valve for the gas tank. An integral 5/8" hose barb securely connects vent hose.
Straight Gas Tank Vent, Stainless - 352210-1 - 354-3522101F1
Gas tank vents function to provide the needed air flow to maintain proper fuel flow while filling and during use. Vents compensate for changes in tank level due to consumption as well as temperature related expansion and contraction. Designed to prevent vacuum build up during use which can disrupt fuel delivery they also double as a pressure release valve for the gas tank. Two screens provide a barrier to keep unwanted contaminants from entering the tank. An integral 5/8" hose barb securely connects vent hose.
Straight Gas Tank Vent, White Nylon - 357105-1 - 354-3571051F1
Gas Tank Vents provide the needed air flow to maintain proper fuel flow while filling and during use. Vents compensate for changes in tank level due to consumption, as well as temperature related expansion and contraction. Designed to prevent vacuum build-up during use, which can disrupt fuel delivery they also double as a pressure release valve for the gas tank. An integral 5/8" hose barb securely connects vent hose.
Stud Catch 1 15/16" Brass - 222842-1 - 354-2228421F1
Extruded brass with stainless ball and spring. Interior use only.
Stud Catch 1-11/16" X 5/16" - 222841-1 - 354-2228411F1
Extruded brass with stainless ball and spring. Interior use only.
Stud Catch 2-1/4" Brass - 222843-1 - 354-2228431F1
Extruded brass with stainless ball and spring. Interior use only.
Stud Catches, Pr. - 222821-1 - 354-2228211F1
Constructed of sand cast brass with a chrome plated finish. These Sea-Dog® Stud Catches are ideal for applications that require repeated disengagement. The design affords no direct contact between the stud and panel surfaces, preventing damage and wear. Stud catches feature an adjustable, stainless steel, spring-loaded ball that allows for easy adjustment of the holding strength depending on door size. Strike can be positioned to enter in any of three ways, from the front, or from either side. Installs with four FH fasteners (not included).
Stud Catches, Pr. - 222822-1 - 354-2228221F1
Constructed of sand cast brass with a chrome plated finish. These Sea-Dog® Stud Catches are ideal for applications that require repeated disengagement. The design affords no direct contact between the stud and panel surfaces, preventing damage and wear. Stud catches feature an adjustable, stainless steel, spring-loaded ball that allows for easy adjustment of the holding strength depending on door size. Strike can be positioned to enter in any of three ways, from the front, or from either side. Installs with four FH fasteners (not included).
Stud Catches, Pr. - 222823-1 - 354-2228231F1
Constructed of sand cast brass with a chrome plated finish. These Sea-Dog® Stud Catches are ideal for applications that require repeated disengagement. The design affords no direct contact between the stud and panel surfaces, preventing damage and wear. Stud catches feature an adjustable, stainless steel, spring-loaded ball that allows for easy adjustment of the holding strength depending on door size. Strike can be positioned to enter in any of three ways, from the front, or from either side. Installs with four FH fasteners (not included).
Switch 4Pos Ignition-Poly - 420379-1 - 354-4203791F1
Four Position Ignition Switch is constructed of polypropylene. For accessory, off, ignition, and start functions. 13/16" diameter long shaft. Maximum panel thickness: 1-1/8. Four screw or four blade terminal electrical configurations. Ignition: 15A @ 12VDC. Solenoid: 30A @ 12VDC. Accessory: 15A @ 12VDC. Includes two keys.
Swivel Hasp - 221130-1 - 354-2211301F1
Constructed of 304 stainless steel for superior corrosion resistance and durability. Designed with a slotted plate that fits over a swivel pad eye which can rotates to act as a temporary lock. Will accept a padlock with up to 5/16" bail for more permanent protection. Installs with eight #8 FH fasteners (not included).
Thru Hull-1-1/2 - 520790 - 354-520790F1
These Thru-Hulls are ideal for salt water use because they are impervious to electrolysis and corrosion. For use with hose to allow water to pass in or out of a vessel. Designed for drainage above the water line. Constructed of injection molded polypropylene.
Thru Hull-1-1/8 - 520770 - 354-520770F1
These Thru-Hulls are ideal for salt water use because they are impervious to electrolysis and corrosion. For use with hose to allow water to pass in or out of a vessel. Designed for drainage above the water line. Constructed of injection molded polypropylene.
Thru-Hull Fitting 1 1/2" -- - 520790-1 - 354-5207901F1
These Thru-Hulls are ideal for salt water use because they are impervious to electrolysis and corrosion. For use with hose to allow water to pass in or out of a vessel. Designed for drainage above the water line. Constructed of injection molded polypropylene.
Thru-Hull Fitting 1 1/8" -- - 520770-1 - 354-5207701F1
These Thru-Hulls are ideal for salt water use because they are impervious to electrolysis and corrosion. For use with hose to allow water to pass in or out of a vessel. Designed for drainage above the water line. Constructed of injection molded polypropylene.
Thru-Hull Fitting 3/4" - 520750-1 - 354-5207501F1
These Thru-Hulls are ideal for salt water use because they are impervious to electrolysis and corrosion. For use with hose to allow water to pass in or out of a vessel. Designed for drainage above the water line. Constructed of injection molded polypropylene.
Thru-Hull Fitting 5/8" -- - 520740-1 - 354-5207401F1
These Thru-Hulls are ideal for salt water use because they are impervious to electrolysis and corrosion. For use with hose to allow water to pass in or out of a vessel. Designed for drainage above the water line. Constructed of injection molded polypropylene.
Thru-Hull W/Scupper - 520510-1 - 354-5205101F1
This Thru-Hull with Scupper Valve mounts through the transom and provides a water exit for boats with self-bailing cockpits. Ideal for above the water line drainage. Valve features a soft black flapper. For use with 1-1/2" hose. Compatible with most self-bailing applications. Constructed of injection molded acetal. Installs with four #6 FH fasteners (not included).
Thru-Hull-3/4 - 520750 - 354-520750F1
These Thru-Hulls are ideal for salt water use because they are impervious to electrolysis and corrosion. For use with hose to allow water to pass in or out of a vessel. Designed for drainage above the water line. Constructed of injection molded polypropylene.
Thru-Hull-5/8 - 520740 - 354-520740F1
These Thru-Hulls are ideal for salt water use because they are impervious to electrolysis and corrosion. For use with hose to allow water to pass in or out of a vessel. Designed for drainage above the water line. Constructed of injection molded polypropylene.
Thumb Latch Ea - 324180-1 - 354-3241801F1
Constructed of UV resistant black injection molded nylon. These Windshield Latches are used to secure windshield doors with a simple twist design. Prevents rattling due to engine vibration at high speeds.
Tiller Cable Pulley 1 3/4" - 091934-1 - 354-0919341F1
Stainless steel bracket and eye pad. Feeds line onto anchor control system to avoid uneven line buildup. Carded.
Tiller Rope Springs, 5" 2/Card - 091814-1 - 354-0918141F1
Electro-galvanized steel tiller rope springs provide tension between the tiller rope and jaw shackles.
Tiller Rope Springs, 5" Bulk - 91814 - 354-091814F1
Electro-galvanized steel tiller rope springs provide tension between the tiller rope and jaw shackles.
Toggle Switch - 420460-1 - 354-4204601F1
Stamped brass. Molded bakelite. Includes On/Off dash plate. For panels to 7/16".
Toggle Switch (Dpdt) - Mom.On/Off/Mom.On - 420104-1 - 354-4201041F1
Water resistant Toggle Switches are constructed of stamped brass, injection molded nylon, and polycarbonate. Features a locking ring with lever seal and a protruding cap nut. Easy to install for a variety of applications. 15A @ 12VDC.
Toggle Switch (Dpst) - On/Off/On - 420103-1 - 354-4201031F1
Water resistant Toggle Switches are constructed of stamped brass, injection molded nylon, and polycarbonate. Features a locking ring with lever seal and a protruding cap nut. Easy to install for a variety of applications. 15A @ 12VDC.
Toggle Switch (Spdt) - Mom.On/Off/Mom.On - 420109-1 - 354-4201091F1
Water resistant Toggle Switches are constructed of stamped brass, injection molded nylon, and polycarbonate. Features a locking ring with lever seal and a protruding cap nut. Easy to install for a variety of applications. 15A @ 12VDC.
Toggle Switch (Spdt) - On/Off/On - 420108-1 - 354-4201081F1
Water resistant Toggle Switches are constructed of stamped brass, injection molded nylon, and polycarbonate. Features a locking ring with lever seal and a protruding cap nut. Easy to install for a variety of applications. 15A @ 12VDC.
Toggle Switch (Spst) - Mom.On/Off - 420102-1 - 354-4201021F1
Water resistant Toggle Switches are constructed of stamped brass, injection molded nylon, and polycarbonate. Features a locking ring with lever seal and a protruding cap nut. Easy to install for a variety of applications. 15A @ 12VDC.
Toggle Switch (Spst) - Mom.On/Off/On - 420105-1 - 354-4201051F1
Water resistant Toggle Switches are constructed of stamped brass, injection molded nylon, and polycarbonate. Features a locking ring with lever seal and a protruding cap nut. Easy to install for a variety of applications. 15A @ 12VDC.
