Sea-Dog Line
Toggle Switch-Light Tip (Spdt) - Mom On/Off/Mom On - 420124-1 - 354-4201241F1
Light Tip Toggle Switches are constructed of stamped brass and injection molded nylon with a polycarbonate toggle. Features a locking ring and lever seal to resist water penetration. Toggle bat features a lighted tip which is white in the OFF position and red in the ON position. Fits panels up to 1/4" thick and requires a 15/32" mounting hole. Easy installation. 15A @ 12VDC.
Toggle Switch-Light Tip (Spdt) - On/Off/On - 420123-1 - 354-4201231F1
Light Tip Toggle Switches are constructed of stamped brass and injection molded nylon with a polycarbonate toggle. Features a locking ring and lever seal to resist water penetration. Toggle bat features a lighted tip which is white in the OFF position and red in the ON position. Fits panels up to 1/4" thick and requires a 15/32" mounting hole. Easy installation. 15A @ 12VDC.
Toggle Switch-Light Tip (Spst) - On/Off - 420121-1 - 354-4201211F1
Light Tip Toggle Switches are constructed of stamped brass and injection molded nylon with a polycarbonate toggle. Features a locking ring and lever seal to resist water penetration. Toggle bat features a lighted tip which is white in the OFF position and red in the ON position. Fits panels up to 1/4" thick and requires a 15/32" mounting hole. Easy installation. 15A @ 12VDC.
Top Insert 1" Square Tube 2Cd - 273580-1 - 354-2735801F1
Top Fitting inserts for 1" square tubing are constructed of UV stabilized injection molded nylon. Top Fittings create an attachment point and function as a pivot point as part of a Bimini top system. 1/4" Pin size.
Top Insert 1" Square Tube 2Cd - 273581-1 - 354-2735811F1
Top Fitting inserts for 1" square tubing are constructed of UV stabilized injection molded nylon. Top Fittings create an attachment point and function as a pivot point as part of a Bimini top system. 1/4" Pin size.
Top Slide 1" Square Tube 2/Cd - 273560-1 - 354-2735601F1
Used as part of a Bimini top system to install a new Bimini top to boat rails or for adding additional support arms to an existing top. These injection molded nylon Slide Fittings are durable, UV and corrosion resistant. Square jaws fit 1" x 1" tubing commonly found on pontoon boats. Set screw on back allows you to quickly and easily adjust the placement of these slides where they are needed.
Top Slide 1" Square Tube 2/Cd - 273561-1 - 354-2735611F1
Used as part of a Bimini top system to install a new Bimini top to boat rails or for adding additional support arms to an existing top. These injection molded nylon Slide Fittings are durable, UV and corrosion resistant. Square jaws fit 1" x 1" tubing commonly found on pontoon boats. Set screw on back allows you to quickly and easily adjust the placement of these slides where they are needed.
Track End Cap Insert .85 Black - 273213-1 - 354-2732131F1
Track Fittings are constructed of UV resistant injection molded nylon. End Caps establish the termination point of a Bimini slide assembly.
Tube Mount Antenna Base - 329520-1 - 354-3295201F1
The Tube Mount Antenna Bracket can be used with any 1" OD stainless tubing creating custom antenna mounts. Investment cast 316 stainless construction. When used in conjunction with a stainless steel 90° round base deck fitting, antenna extensions of any length can be made with a full-length passage for coaxial connectors. Attaches to tubing with two 1/4"-28 x 3/16" set screws which are included. This bracket will accept any standard antenna with 1-14 threads.
Twin Roller Door Catch - 227141-1 - 354-2271411F1
Upgrade your cabinet or wardrobe with these Twin Roller Door Catches. Sturdy injection molded nylon construction these catches provide secure door closure. Installs with four #6 RH fasteners (not included). Packed in sets of 4 each.
Twin Shank Bow Eye - 079233-1 - 354-0792331F1
features a die cast zinc chrome plated head with chrome steel shafts. U-Bolt surrounds cast eye for added strength. 5/16"-18 UNC threads. For use as a tie-down point on your boat's bow. Nuts and washers included. Recommended for fresh water applications. Breaking strength is 6,000 lbs.
Two Pole Rod Storage Rack, Black - 325029-1 - 354-3250291F1
Constructed from one-piece of injection molded UV stabilized polypropylene. Holds rods up to 1-3/4" in diameter. Includes four #8 stainless steel mounting screws. Has a built-in knife and lure holder.
Universal Deck Plate Key - 335690-1 - 354-3356901F1
Universal Deck Fill Key is constructed of corrosion resistant stamped 304 stainless steel. Fits all Sea-Dog® fuel fills as well as most other competitors fills. A multi-purpose tool that also functions as a shackle key, bottle opener, straight blade screwdriver, plus 5/16", and 7/16" hex head wrenches.
Universal Kill Switch - 420498-1 - 354-4204981F1
The marine emergency cut-off Universal Kill Switch attaches to your life vest while operating a boat or personal watercraft and is designed to instantly cut battery power when detached. Dual circuitry allows kill switch to be wired for either ignition kill or magneto kill depending on the application. The housing is constructed of weatherproof injection molded nylon and Delrin with 1/4" brass terminals. The switch includes a lanyard approximately 15" when coiled and 48" when stretched, which should be replaced if worn, cut, or frayed. Mounting hole is 5/8" in diameter. Maximum panel thickness: 3/8". Maximum 5A draw. WARNING: Switch should be tested for proper function before each use.
Washdown Water Outlet Ss - 513120-1 - 354-5131201F1
Allows for garden hose hookup to on board water system for use as washdown system. Standard male hose connector. Requires separate ball or gate valve to regulate water flow. 1/2" FIPT x 3/4" MGHT.
Waterproof 12V Trolling Motor Plug - 426184-1 - 354-4261841F1
Trolling Motor Plug is constructed of injection molded PVC. Two 10-gauge wire leads. Receptacle fits 1-1/8" hole. 30A.
Waterproof 12V Trolling Motor Receptacle - 426183-1 - 354-4261831F1
Trolling Motor Plug is constructed of injection molded PVC. Two 10-gauge wire leads. 30A.
Waterproof Playing Cards - 588811-1 - 354-5888111F1
Designed especially for marine use and are 100% plastic. New design features artwork of ship's figureheads. Very durable.
Windshield / Door Bumper Pad, Black - 324390-1 - 354-3243901F1
Injection molded PVC.
Windshield / Door Bumper Pad, Clear - 324391-1 - 354-3243911F1
Injection molded PVC.
Windshield Brace Foot, Black, Pair - 324300-1 - 354-3243001F1
Constructed of UV resistant black injection molded nylon. This Windshield Brace Foot fits 1/2" ID tubing to support a windshield.
Wiper Blade - 414212S-1 - 354-414212S1F1
Deluxe curved Wiper Blade with marine grade silicone rubber squeegee. For use on flat or curved windshields with a straight blade style arm. 304 stainless steel construction.
Wiper Blade - 414214S-1 - 354-414214S1F1
Deluxe curved Wiper Blade with marine grade silicone rubber squeegee. For use on flat or curved windshields with a straight blade style arm. 304 stainless steel construction.
Wiper Blade - 414216S-1 - 354-414216S1F1
Deluxe curved Wiper Blade with marine grade silicone rubber squeegee. For use on flat or curved windshields with a straight blade style arm. 304 stainless steel construction.
Wiper Blade - 414218S-1 - 354-414218S1F1
Deluxe curved Wiper Blade with marine grade silicone rubber squeegee. For use on flat or curved windshields with a straight blade style arm. 304 stainless steel construction.
Wiper Blade - 414220S-1 - 354-414220S1F1
Deluxe curved Wiper Blade with marine grade silicone rubber squeegee. For use on flat or curved windshields with a straight blade style arm. 304 stainless steel construction.
Wiper Blade - 414222S-1 - 354-414222S1F1
Deluxe curved Wiper Blade with marine grade silicone rubber squeegee. For use on flat or curved windshields with a straight blade style arm. 304 stainless steel construction.
Wire Stripper/Crimper Tool - 429900-1 - 354-4299001F1
Wire Stripper & Crimper tool crimps and strips 22-10 gauge wire. Constructed of powder coated steel. A great addition to any tool box.
Wireless Remote Control - 405682-1 - 354-4056821F1
Allows completely portable remote control of your spotlight.
Wireless Remote For 4056203 Spot/Flood Light - 405692-1 - 354-4056921F1
Wireless 2nd station remote for spot/flood lights.
Yeck Fill Cap-Blue (Water) - 357017-1 - 354-3570171F1
Blue Water Cap Only. Cap threads are 1-1/4" x 11-1/2 NPSM straight.
Zinc Plated Steel Clamp-On Oar Lock, Pair, 1/2" Shaft - 582060-1 - 354-5820601F1
Clamp-On Oarlock with standard 1/2" x 2" pin. Attaches quickly to oar shaft with easy to install bolted clamp. Fits oars between 3/4" and 1-7/16" in diameter. Recommended for freshwater use. Zinc plated steel construction.
