Duramax Marine Llc
Duramax 114X134 Johnson Naval Brass Cutless® Bearing, Bird - Bird 870322101 - 915-114X134 Superseded By: 915-Birdf1
Johnson Cutless® Naval Brass Sleeve Bearings adapt equally well to strut and stern tube mounts, and are often used effectively as rudder-stock and pintle bushings. Bearing diameters are precision fitted to the designated shaft size with the correct clearance for efficient water lubrication. External brass shells are machined and polished to provide easy fitting. Specially formulated oil and chemical resistant nitrile rubber is securely bonded to the shell. Units with thin shells are available for the struts of small craft. Sleeve bearings are usually installed by light press-fitting and locked in place with cone-pointed set screws.
Duramax 114X134Fg Johnson Non-Metalic Cutless Bearing, Della - Della - 915-114X134Fg Superseded By: 915-Dellaf1
Johnson Cutless® Non-Metallic Sleeve Bearings feature a dense structure of engineered reinforced thermoset plastic. The specially compounded Nitrile Rubber is securely bonded to the shell with all tolerances maintained for proper lubrication. Being non-corrosive and inherently resistant to all known chemicals, oil and grease, as well as being anti-electrolytic, the Johnson Cutless® Non-Metallic Sleeve Bearings are ideally suited for installations wherever corrosion or electrolysis is a problem.
Duramax 118X134 Johnson Naval Brass Cutless® Bearing, Bend - Bend - 915-118X134 Superseded By: 915-Bendf1
Johnson Cutless® Naval Brass Sleeve Bearings adapt equally well to strut and stern tube mounts, and are often used effectively as rudder-stock and pintle bushings. Bearing diameters are precision fitted to the designated shaft size with the correct clearance for efficient water lubrication. External brass shells are machined and polished to provide easy fitting. Specially formulated oil and chemical resistant nitrile rubber is securely bonded to the shell. Units with thin shells are available for the struts of small craft. Sleeve bearings are usually installed by light press-fitting and locked in place with cone-pointed set screws.
Duramax 138X218 Johnson Naval Brass Cutless® Bearing, Bond - Bond - 915-138X218 Superseded By: 915-Bondf1
Johnson Cutless® Naval Brass Sleeve Bearings adapt equally well to strut and stern tube mounts, and are often used effectively as rudder-stock and pintle bushings. Bearing diameters are precision fitted to the designated shaft size with the correct clearance for efficient water lubrication. External brass shells are machined and polished to provide easy fitting. Specially formulated oil and chemical resistant nitrile rubber is securely bonded to the shell. Units with thin shells are available for the struts of small craft. Sleeve bearings are usually installed by light press-fitting and locked in place with cone-pointed set screws.
Duramax Able Johnson Naval Brass Cutless Bearing , 3/4" Dia. X 1-1/4"O.D X 3"L - Able - 915-Ablef1
Johnson Cutless® Bearings adapt equally well to strut and stern tube mounts, and are often used effectively as rudder-stock and pintle bushings. Bearing diameters are precision fitted to the designated shaft size with the correct clearance for efficient water lubrication. External brass shells are machined and polished to provide easy fitting. Specially formulated oil and chemical resistant nitrile rubber is securely bonded to the shell. Units with thin shells are available for the struts of small craft.
Duramax Acid Johnson Naval Brass Cutless Bearing , 7/8" Dia. X 1-1/4"O.D X 3-1/2"L - Acid - 915-Acidf1
Johnson Cutless® Bearings adapt equally well to strut and stern tube mounts, and are often used effectively as rudder-stock and pintle bushings. Bearing diameters are precision fitted to the designated shaft size with the correct clearance for efficient water lubrication. External brass shells are machined and polished to provide easy fitting. Specially formulated oil and chemical resistant nitrile rubber is securely bonded to the shell. Units with thin shells are available for the struts of small craft.
Duramax Apex Johnson Naval Brass Cutless Bearing , 7/8" Dia. X 1-3/8"O.D X 3-1/2"L - Apex - 915-Apexf1
Johnson Cutless® Bearings adapt equally well to strut and stern tube mounts, and are often used effectively as rudder-stock and pintle bushings. Bearing diameters are precision fitted to the designated shaft size with the correct clearance for efficient water lubrication. External brass shells are machined and polished to provide easy fitting. Specially formulated oil and chemical resistant nitrile rubber is securely bonded to the shell. Units with thin shells are available for the struts of small craft.
Duramax Atom Johnson Naval Brass Cutless Bearing , 7/8" Dia. X 1-1/2"O.D X 3-1/2"L - Atom - 915-Atomf1
Johnson Cutless® Bearings adapt equally well to strut and stern tube mounts, and are often used effectively as rudder-stock and pintle bushings. Bearing diameters are precision fitted to the designated shaft size with the correct clearance for efficient water lubrication. External brass shells are machined and polished to provide easy fitting. Specially formulated oil and chemical resistant nitrile rubber is securely bonded to the shell. Units with thin shells are available for the struts of small craft.
Duramax Back Johnson Naval Brass Cutless Bearing , 1" Dia. X 1-1/4"O.D X 4"L - Back - 915-Backf1
Johnson Cutless® Bearings adapt equally well to strut and stern tube mounts, and are often used effectively as rudder-stock and pintle bushings. Bearing diameters are precision fitted to the designated shaft size with the correct clearance for efficient water lubrication. External brass shells are machined and polished to provide easy fitting. Specially formulated oil and chemical resistant nitrile rubber is securely bonded to the shell. Units with thin shells are available for the struts of small craft.
Duramax Bait Johnson Naval Brass Cutless Bearing , 1" Dia. X 1-3/8"O.D X 4"L - Bait - 915-Baitf1
Johnson Cutless® Bearings adapt equally well to strut and stern tube mounts, and are often used effectively as rudder-stock and pintle bushings. Bearing diameters are precision fitted to the designated shaft size with the correct clearance for efficient water lubrication. External brass shells are machined and polished to provide easy fitting. Specially formulated oil and chemical resistant nitrile rubber is securely bonded to the shell. Units with thin shells are available for the struts of small craft.
Duramax Bale Johnson Naval Brass Cutless Bearing , 1" Dia. X 1-1/2"O.D X 4"L - Bale - 915-Balef1
Johnson Cutless® Bearings adapt equally well to strut and stern tube mounts, and are often used effectively as rudder-stock and pintle bushings. Bearing diameters are precision fitted to the designated shaft size with the correct clearance for efficient water lubrication. External brass shells are machined and polished to provide easy fitting. Specially formulated oil and chemical resistant nitrile rubber is securely bonded to the shell. Units with thin shells are available for the struts of small craft.
Duramax Band Johnson Naval Brass Cutless Bearing , 1" Dia. X 1-5/8"O.D X 4"L - Band - 915-Bandf1
Johnson Cutless® Bearings adapt equally well to strut and stern tube mounts, and are often used effectively as rudder-stock and pintle bushings. Bearing diameters are precision fitted to the designated shaft size with the correct clearance for efficient water lubrication. External brass shells are machined and polished to provide easy fitting. Specially formulated oil and chemical resistant nitrile rubber is securely bonded to the shell. Units with thin shells are available for the struts of small craft.
Duramax Beam Johnson Naval Brass Cutless Bearing , 1-1/8" Dia. X 1-1/2"O.D X 4-1/2"L - Beam - 915-Beamf1
Johnson Cutless® Bearings adapt equally well to strut and stern tube mounts, and are often used effectively as rudder-stock and pintle bushings. Bearing diameters are precision fitted to the designated shaft size with the correct clearance for efficient water lubrication. External brass shells are machined and polished to provide easy fitting. Specially formulated oil and chemical resistant nitrile rubber is securely bonded to the shell. Units with thin shells are available for the struts of small craft.
Duramax Belt Johnson Naval Brass Cutless Bearing , 1-1/8" Dia. X 1-5/8"O.D X 4-1/2"L - Belt - 915-Beltf1
Johnson Cutless® Bearings adapt equally well to strut and stern tube mounts, and are often used effectively as rudder-stock and pintle bushings. Bearing diameters are precision fitted to the designated shaft size with the correct clearance for efficient water lubrication. External brass shells are machined and polished to provide easy fitting. Specially formulated oil and chemical resistant nitrile rubber is securely bonded to the shell. Units with thin shells are available for the struts of small craft.
Duramax Bend Johnson Naval Brass Cutless Bearing , 1-1/8" Dia. X 1-3/4"O.D X 4-1/2"L - Bend - 915-Bendf1
Johnson Cutless® Bearings adapt equally well to strut and stern tube mounts, and are often used effectively as rudder-stock and pintle bushings. Bearing diameters are precision fitted to the designated shaft size with the correct clearance for efficient water lubrication. External brass shells are machined and polished to provide easy fitting. Specially formulated oil and chemical resistant nitrile rubber is securely bonded to the shell. Units with thin shells are available for the struts of small craft.
Duramax Bind Johnson Naval Brass Cutless Bearing , 1-1/4" Dia. X 1-1/2"O.D X 5"L - Bind - 915-Bindf1
Johnson Cutless® Bearings adapt equally well to strut and stern tube mounts, and are often used effectively as rudder-stock and pintle bushings. Bearing diameters are precision fitted to the designated shaft size with the correct clearance for efficient water lubrication. External brass shells are machined and polished to provide easy fitting. Specially formulated oil and chemical resistant nitrile rubber is securely bonded to the shell. Units with thin shells are available for the struts of small craft.
Duramax Bird Johnson Naval Brass Cutless Bearing , 1-1/4" Dia. X 1-3/4"O.D X 5"L - Bird - 915-Birdf1
Johnson Cutless® Bearings adapt equally well to strut and stern tube mounts, and are often used effectively as rudder-stock and pintle bushings. Bearing diameters are precision fitted to the designated shaft size with the correct clearance for efficient water lubrication. External brass shells are machined and polished to provide easy fitting. Specially formulated oil and chemical resistant nitrile rubber is securely bonded to the shell. Units with thin shells are available for the struts of small craft.
Duramax Bite Johnson Naval Brass Cutless Bearing , 1-1/4" Dia. X 2"O.D X 5"L - Bite - 915-Bitef1
Johnson Cutless® Bearings adapt equally well to strut and stern tube mounts, and are often used effectively as rudder-stock and pintle bushings. Bearing diameters are precision fitted to the designated shaft size with the correct clearance for efficient water lubrication. External brass shells are machined and polished to provide easy fitting. Specially formulated oil and chemical resistant nitrile rubber is securely bonded to the shell. Units with thin shells are available for the struts of small craft.
Duramax Boat Johnson Naval Brass Cutless Bearing , 1-3/8" Dia. X 1-7/8"O.D X 5-1/2"L - Boat - 915-Boatf1
Johnson Cutless® Bearings adapt equally well to strut and stern tube mounts, and are often used effectively as rudder-stock and pintle bushings. Bearing diameters are precision fitted to the designated shaft size with the correct clearance for efficient water lubrication. External brass shells are machined and polished to provide easy fitting. Specially formulated oil and chemical resistant nitrile rubber is securely bonded to the shell. Units with thin shells are available for the struts of small craft.
Duramax Bold Johnson Naval Brass Cutless Bearing , 1-3/8" Dia. X 2"O.D X 5-1/2"L - Bold - 915-Boldf1
Johnson Cutless® Bearings adapt equally well to strut and stern tube mounts, and are often used effectively as rudder-stock and pintle bushings. Bearing diameters are precision fitted to the designated shaft size with the correct clearance for efficient water lubrication. External brass shells are machined and polished to provide easy fitting. Specially formulated oil and chemical resistant nitrile rubber is securely bonded to the shell. Units with thin shells are available for the struts of small craft.
Duramax Bond Johnson Naval Brass Cutless Bearing , 1-3/8" Dia. X 2-1/8"O.D X 5-1/2"L - Bond - 915-Bondf1
Johnson Cutless® Bearings adapt equally well to strut and stern tube mounts, and are often used effectively as rudder-stock and pintle bushings. Bearing diameters are precision fitted to the designated shaft size with the correct clearance for efficient water lubrication. External brass shells are machined and polished to provide easy fitting. Specially formulated oil and chemical resistant nitrile rubber is securely bonded to the shell. Units with thin shells are available for the struts of small craft.
Duramax Boss Johnson Naval Brass Cutless Bearing , 1-1/2" Dia. X 2"O.D X 6"L - Boss - 915-Bossf1
Johnson Cutless® Bearings adapt equally well to strut and stern tube mounts, and are often used effectively as rudder-stock and pintle bushings. Bearing diameters are precision fitted to the designated shaft size with the correct clearance for efficient water lubrication. External brass shells are machined and polished to provide easy fitting. Specially formulated oil and chemical resistant nitrile rubber is securely bonded to the shell. Units with thin shells are available for the struts of small craft.
Duramax Brad Johnson Naval Brass Cutless Bearing , 1-1/2" Dia. X 2-3/8"O.D X 6"L - Brad - 915-Bradf1
Johnson Cutless® Bearings adapt equally well to strut and stern tube mounts, and are often used effectively as rudder-stock and pintle bushings. Bearing diameters are precision fitted to the designated shaft size with the correct clearance for efficient water lubrication. External brass shells are machined and polished to provide easy fitting. Specially formulated oil and chemical resistant nitrile rubber is securely bonded to the shell. Units with thin shells are available for the struts of small craft.
Duramax Brow Johnson Naval Brass Cutless Bearing , 1-3/4" Dia. X 2-3/8"O.D X 7"L - Brow - 915-Browf1
Johnson Cutless® Bearings adapt equally well to strut and stern tube mounts, and are often used effectively as rudder-stock and pintle bushings. Bearing diameters are precision fitted to the designated shaft size with the correct clearance for efficient water lubrication. External brass shells are machined and polished to provide easy fitting. Specially formulated oil and chemical resistant nitrile rubber is securely bonded to the shell. Units with thin shells are available for the struts of small craft.
Duramax Buck Johnson Naval Brass Cutless Bearing , 1-3/4" Dia. X 2-5/8"O.D X 7"L - Buck - 915-Buckf1
Johnson Cutless® Bearings adapt equally well to strut and stern tube mounts, and are often used effectively as rudder-stock and pintle bushings. Bearing diameters are precision fitted to the designated shaft size with the correct clearance for efficient water lubrication. External brass shells are machined and polished to provide easy fitting. Specially formulated oil and chemical resistant nitrile rubber is securely bonded to the shell. Units with thin shells are available for the struts of small craft.
Duramax Call Johnson Naval Brass Cutless Bearing , 2" Dia. X 2-5/8"O.D X 8"L - Call - 915-Callf1
Johnson Cutless® Bearings adapt equally well to strut and stern tube mounts, and are often used effectively as rudder-stock and pintle bushings. Bearing diameters are precision fitted to the designated shaft size with the correct clearance for efficient water lubrication. External brass shells are machined and polished to provide easy fitting. Specially formulated oil and chemical resistant nitrile rubber is securely bonded to the shell. Units with thin shells are available for the struts of small craft.
Duramax Calm Johnson Naval Brass Cutless Bearing , 2" Shaft Dia. X3"O.D X 8"L - Calm - 915-Calmf1
Johnson Cutless® Bearings adapt equally well to strut and stern tube mounts, and are often used effectively as rudder-stock and pintle bushings. Bearing diameters are precision fitted to the designated shaft size with the correct clearance for efficient water lubrication. External brass shells are machined and polished to provide easy fitting. Specially formulated oil and chemical resistant nitrile rubber is securely bonded to the shell. Units with thin shells are available for the struts of small craft.
Duramax Care Johnson Naval Brass Cutless Bearing , 2-1/4" Dia. X 2-15/16"O.D X 9"L - Care - 915-Caref1
Johnson Cutless® Bearings adapt equally well to strut and stern tube mounts, and are often used effectively as rudder-stock and pintle bushings. Bearing diameters are precision fitted to the designated shaft size with the correct clearance for efficient water lubrication. External brass shells are machined and polished to provide easy fitting. Specially formulated oil and chemical resistant nitrile rubber is securely bonded to the shell. Units with thin shells are available for the struts of small craft.
Duramax Cart Johnson Naval Brass Cutless Bearing , 2-1/4" Dia. X 3-1/8"O.D X 9"L - Cart - 915-Cartf1
Johnson Cutless® Bearings adapt equally well to strut and stern tube mounts, and are often used effectively as rudder-stock and pintle bushings. Bearing diameters are precision fitted to the designated shaft size with the correct clearance for efficient water lubrication. External brass shells are machined and polished to provide easy fitting. Specially formulated oil and chemical resistant nitrile rubber is securely bonded to the shell. Units with thin shells are available for the struts of small craft.
Duramax Cord Johnson Naval Brass Cutless Bearing , 2-1/2" Dia. X 3-1/8"O.D X 10"L - Cord - 915-Cordf1
Johnson Cutless® Bearings adapt equally well to strut and stern tube mounts, and are often used effectively as rudder-stock and pintle bushings. Bearing diameters are precision fitted to the designated shaft size with the correct clearance for efficient water lubrication. External brass shells are machined and polished to provide easy fitting. Specially formulated oil and chemical resistant nitrile rubber is securely bonded to the shell. Units with thin shells are available for the struts of small craft.
Duramax Corn Johnson Naval Brass Cutless Bearing , 2-1/2" Dia. X 3-3/8"O.D X 10"L - Corn - 915-Cornf1
Johnson Cutless® Bearings adapt equally well to strut and stern tube mounts, and are often used effectively as rudder-stock and pintle bushings. Bearing diameters are precision fitted to the designated shaft size with the correct clearance for efficient water lubrication. External brass shells are machined and polished to provide easy fitting. Specially formulated oil and chemical resistant nitrile rubber is securely bonded to the shell. Units with thin shells are available for the struts of small craft.
Duramax Crow Johnson Naval Brass Cutless Bearing , 2-3/4" Dia. X 3-3/8"O.D X 11"L - Crow - 915-Crowf1
Johnson Cutless® Bearings adapt equally well to strut and stern tube mounts, and are often used effectively as rudder-stock and pintle bushings. Bearing diameters are precision fitted to the designated shaft size with the correct clearance for efficient water lubrication. External brass shells are machined and polished to provide easy fitting. Specially formulated oil and chemical resistant nitrile rubber is securely bonded to the shell. Units with thin shells are available for the struts of small craft.
Duramax Dane Johnson Naval Brass Cutless Bearing , 3" Dia. X 3-3/4"O.D X 12"L - Dane - 915-Danef1
Johnson Cutless® Bearings adapt equally well to strut and stern tube mounts, and are often used effectively as rudder-stock and pintle bushings. Bearing diameters are precision fitted to the designated shaft size with the correct clearance for efficient water lubrication. External brass shells are machined and polished to provide easy fitting. Specially formulated oil and chemical resistant nitrile rubber is securely bonded to the shell. Units with thin shells are available for the struts of small craft.
Duramax Dine Johnson Naval Brass Cutless Bearing , 3-1/2" Dia. X 4-1/4"O.D X 14"L - Dine - 915-Dinef1
Johnson Cutless® Bearings adapt equally well to strut and stern tube mounts, and are often used effectively as rudder-stock and pintle bushings. Bearing diameters are precision fitted to the designated shaft size with the correct clearance for efficient water lubrication. External brass shells are machined and polished to provide easy fitting. Specially formulated oil and chemical resistant nitrile rubber is securely bonded to the shell. Units with thin shells are available for the struts of small craft.
Duramax Dock Johnson Naval Brass Cutless Bearing , 3-1/2" Dia. X 4-1/2"O.D X 14"L - Dock - 915-Dockf1
Johnson Cutless® Bearings adapt equally well to strut and stern tube mounts, and are often used effectively as rudder-stock and pintle bushings. Bearing diameters are precision fitted to the designated shaft size with the correct clearance for efficient water lubrication. External brass shells are machined and polished to provide easy fitting. Specially formulated oil and chemical resistant nitrile rubber is securely bonded to the shell. Units with thin shells are available for the struts of small craft.
