Perko
1 1/2 Pipe To Hose Adapter - 0076Dp8Plb - 9-0076Dp8Plbf1
Cast bronze. Meets requirements of USCG safety standards.
1 1/2 Thru Hull Connection - 0350008Dpp - 9-0350008Dppf1
Available in plain or chrome plated bronze, these fittings have a hose barb connection and are recommended for use above the waterline only. The flange is machined to fit the hull tightly and grooved to retain bedding compound. Minimum hull thickness 3/8". NOT TO BE USED IN POTABLE WATER SYSTEMS.
1 1/4 Pipe To Hose Adapter - 0076Dp7Plb - 9-0076Dp7Plbf1
Cast bronze. Meets requirements of USCG safety standards.
1 90 Deg Pipe To Hose Adapte - 0063Dp6Plb - 9-0063Dp6Plbf1
Cast bronze. Meets requirements of USCG safety standards.
1 90 Deg Pipe To Hose Adapter - 0063009Plb - 9-0063009Plbf1
Cast bronze. Meets requirements of USCG safety standards.
1 Pipe To Hose Adapter - 0076Dp6Plb - 9-0076Dp6Plbf1
Cast bronze. Meets requirements of USCG safety standards.
1 Thru Hull Connection Bulk - 0328Dp6 - 9-0328Dp6F1
Molded white plastic with broad flange. For use with hose. Not recommended for use below waterline.
1 Thru Hull Connection Chr - 0350006Dpc - 9-0350006Dpcf1
Available in plain or chrome plated bronze, these fittings have a hose barb connection and are recommended for use above the waterline only. The flange is machined to fit the hull tightly and grooved to retain bedding compound. Minimum hull thickness 3/8".
1 Thru Hull Connection Plb - 0350006Dpp - 9-0350006Dppf1
Available in plain or chrome plated bronze, these fittings have a hose barb connection and are recommended for use above the waterline only. The flange is machined to fit the hull tightly and grooved to retain bedding compound. Minimum hull thickness 3/8".
1-1/2 90 Deg Pipe/Hose Adapte - 0063Dp8Plb - 9-0063Dp8Plbf1
Cast bronze. Meets requirements of USCG safety standards.
1-1/2 Thru Hull Connection - 0328Dp8 - 9-0328Dp8F1
Molded white plastic with broad flange. For use with hose. Not recommended for use below waterline.
1-1/2 Thru Hull Connection C - 0350008Dpc - 9-0350008Dpcf1
Available in plain or chrome plated bronze, these fittings have a hose barb connection and are recommended for use above the waterline only. The flange is machined to fit the hull tightly and grooved to retain bedding compound. Minimum hull thickness 3/8".
1-1/2 X 1-1/2 Rem Pin Hinges, 4 Hole #8 Fastener, 1 Pr. - 1293Dp2Chr - 9-1293Dp2Chrf1
Removable Pins.
1-1/2" Bronze Seacock Body - 0805008Plb - 9-0805008Plbf1
Ball valve design. Cast bronze. Meets needs of applications that require long, scoop or flush type thru-hulls.
1-1/2" Bronze Seacock W/90° Tail Piece - 0834008Plb - 9-0834008Plbf1
Includes: thru-hull, hose adapter, drain plug, four pre-drilled mounting holes and bonding screw. Incorporates a plastic ball and seat assuring a tight seal and ease of operation and drain plugs for winterizing. Handles are easily removed. Overall height is measured from the top of the hose adapter to the bottom of the flange.
1-1/2" Bronze Seacock W/Straight Tail Piece - 0835008Plb - 9-0835008Plbf1
Includes: thru-hull, hose adapter, drain plug, four pre-drilled mounting holes and bonding screw. Incorporates a plastic ball and seat assuring a tight seal and ease of operation and drain plugs for winterizing. Handles are easily removed. Overall height is measured from the top of the hose adapter to the bottom of the flange.
1-1/2" Chrome Cap Only F/528 - 0528Dp899A - 9-0528Dp899Af1
For the 528 series deck plates. Chrome plated bronze. Comes complete with O-ring.
1-1/2" Chrome Plated Bronze Door Hook - 0956Dp1Chr - 9-0956Dp1Chrf1
Chrome plated cast bronze.
1-1/2" Diesel Pipe Deck Plate - 0528Dpdchr - 9-0528Dpdchrf1
Cast bronze, chrome plated. Comes complete with key, O-ring and retaining cable on cap. The 1-1/4" caps have a slot between holes. Screw size is 8. Use spare key series 1248 and spare O-ring series 513.
1-1/2" Gas Pipe Deck Plate - 0528Dpgchr - 9-0528Dpgchrf1
Cast bronze, chrome plated. Comes complete with key, O-ring and retaining cable on cap. The 1-1/4" caps have a slot between holes. Screw size is 8. Use spare key series 1248 and spare O-ring series 513.
1-1/2" Intake Water Strainer - 0493008Plb - 9-0493008Plbf1
Cast bronze. Designed for easy installation and cleaning. Features mounting lugs cast into both sides to assure universal mounting, four outside tie rods and a 316 stainless steel strainer basket to minimize electrolysis. Hinged lugs for cast bronze cover permit easy removal and cleaning of basket. Drain plug in bottom casting is provided for easy removal of sediment and draining for winterization. Ratio given for open area to pipe size.
1-1/2" Unmarked Pipe Deck Plt - 0528Dp8Chr - 9-0528Dp8Chrf1
Cast bronze, chrome plated. Comes complete with key, O-ring and retaining cable on cap. The 1-1/4" caps have a slot between holes. Screw size is 8. Use spare key series 1248 and spare O-ring series 513.
1-1/2" Water Pipe Deck Plate - 0528Dpwchr - 9-0528Dpwchrf1
Cast bronze, chrome plated. Comes complete with key, O-ring and retaining cable on cap. The 1-1/4" caps have a slot between holes. Screw size is 8. Use spare key series 1248 and spare O-ring series 513.
1-1/4 90 Deg Pipe/Hose Adapte - 0063Dp7Plb - 9-0063Dp7Plbf1
Cast bronze. Meets requirements of USCG safety standards.
1-1/4" Bronze Seacock Body - 0805007Plb - 9-0805007Plbf1
Ball valve design. Cast bronze. Meets needs of applications that require long, scoop or flush type thru-hulls.
1-1/4" Bronze Seacock W/90° Tail Piece - 0834007Plb - 9-0834007Plbf1
Includes: thru-hull, hose adapter, drain plug, four pre-drilled mounting holes and bonding screw. Incorporates a plastic ball and seat assuring a tight seal and ease of operation and drain plugs for winterizing. Handles are easily removed. Overall height is measured from the top of the hose adapter to the bottom of the flange.
1-1/4" Intake Water Strainer - 0493007Plb - 9-0493007Plbf1
Cast bronze. Designed for easy installation and cleaning. Features mounting lugs cast into both sides to assure universal mounting, four outside tie rods and a 316 stainless steel strainer basket to minimize electrolysis. Hinged lugs for cast bronze cover permit easy removal and cleaning of basket. Drain plug in bottom casting is provided for easy removal of sediment and draining for winterization. Ratio given for open area to pipe size.
1-1/4" Scoop Thru Hull W/Nut - 0065Dp7Plb - 9-0065Dp7Plbf1
Cast bronze. Screw size is #8. Strainer is 3" x 4", except for 65DP7PLB which is 3-1/4" x 4-1/4". Includes nut. UL Listed. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1-1/4"Bronze Seacock W/Straight Tail Piece - 0835007Plb - 9-0835007Plbf1
Includes: thru-hull, hose adapter, drain plug, four pre-drilled mounting holes and bonding screw. Incorporates a plastic ball and seat assuring a tight seal and ease of operation and drain plugs for winterizing. Handles are easily removed. Overall height is measured from the top of the hose adapter to the bottom of the flange.
1-1/8 Chr Thru-Hull F/Hose - 035006Adpc - 9-035006Adpcf1
Available in plain or chrome plated bronze, these fittings have a hose barb connection and are recommended for use above the waterline only. The flange is machined to fit the hull tightly and grooved to retain bedding compound. Minimum hull thickness 3/8".
1-1/8 Thru Hull Connect Bulk - 0328Dp6A - 9-0328Dp6Af1
Molded white plastic with broad flange. For use with hose. Not recommended for use below waterline.
1" Bronze Seacock Body - 0805006Plb - 9-0805006Plbf1
Ball valve design. Cast bronze. Meets needs of applications that require long, scoop or flush type thru-hulls.
1" Bronze Seacock W/90° Tail Piece - 0834006Plb - 9-0834006Plbf1
Includes: thru-hull, hose adapter, drain plug, four pre-drilled mounting holes and bonding screw. Incorporates a plastic ball and seat assuring a tight seal and ease of operation and drain plugs for winterizing. Handles are easily removed. Overall height is measured from the top of the hose adapter to the bottom of the flange. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1" Intake Water Strainer - 0493006Plb - 9-0493006Plbf1
Cast bronze. Designed for easy installation and cleaning. Features mounting lugs cast into both sides to assure universal mounting, four outside tie rods and a 316 stainless steel strainer basket to minimize electrolysis. Hinged lugs for cast bronze cover permit easy removal and cleaning of basket. Drain plug in bottom casting is provided for easy removal of sediment and draining for winterization. Ratio given for open area to pipe size.
1" Scoop Thru Hull W/Nut - 0065Dp6Plb - 9-0065Dp6Plbf1
Cast bronze. Screw size is #8. Strainer is 3" x 4", except for 65DP7PLB which is 3-1/4" x 4-1/4". Includes nut. UL Listed. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1"Bronze Seacock W/Straight Tail Piece - 0835006Plb - 9-0835006Plbf1
Includes: thru-hull, hose adapter, drain plug, four pre-drilled mounting holes and bonding screw. Incorporates a plastic ball and seat assuring a tight seal and ease of operation and drain plugs for winterizing. Handles are easily removed. Overall height is measured from the top of the hose adapter to the bottom of the flange.
1/2 Pipe To Hose Adapter - 0076Dp4Plb - 9-0076Dp4Plbf1
Cast bronze. Meets requirements of USCG safety standards.
1/2 Plastic Cable Strap 10/B - 0196Dp5 - 9-0196Dp5F1
Black plastic that is ultra-violet stabilized for weather resistance. Eliminates need for insulating cushion. Width is 1/2". Conforms to USCG standards. 10 Per Card.
1/2 Thru Hull Connection - 0328Dp4 - 9-0328Dp4F1
Molded white plastic with broad flange. For use with hose. Not recommended for use below waterline.
1/2" Intake Water Strainer - 0493004Plb - 9-0493004Plbf1
Cast bronze. Designed for easy installation and cleaning. Features mounting lugs cast into both sides to assure universal mounting, four outside tie rods and a 316 stainless steel strainer basket to minimize electrolysis. Hinged lugs for cast bronze cover permit easy removal and cleaning of basket. Drain plug in bottom casting is provided for easy removal of sediment and draining for winterization. Ratio given for open area to pipe size.
1/2" Scoop Thru Hull W/Nut - 0065Dp4Plb - 9-0065Dp4Plbf1
Cast bronze. Screw size is #8. Strainer is 3" x 4", except for 65DP7PLB which is 3-1/4" x 4-1/4". Includes nut. UL Listed. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1/4 Plastic Cable Strap 10/B - 0196Dp2 - 9-0196Dp2F1
Black plastic that is ultra-violet stabilized for weather resistance. Eliminates need for insulating cushion. Width is 1/2". Conforms to USCG standards. 10 Per Card.
10" Dock Line Spring - 0759001Znc - 9-0759001Zncf1
Galvanized spring steel10" length overall, 1-1/2" O.D., 4-1/2" compressionFor 1/2" rope size
1045P0Sdp Plug-In Type Base, Ss, 2Pin - 1045P0Sdp - 9-1045P0Sdpf1
Polished Stainless SteelBlack PolymerWaterproof Snap-On CoverFits 3/4" Poles with Locking CollarPigtail LeadsFig. 1045 (2 Pin)Fits: 1343, 1347, 1348, 1349, 1400, 1440, 1442, 1444, 1450, 1451, 1452, 1460, 1454, 1470 Series All-Round Pole Lights 1612 and 1616 Series Bi-Color Pole Lights
12 Offset Mt Wind Adj Pr - 1291Dp0Chr - 9-1291Dp0Chrf1
Chrome plated zinc with black plastic knob. Overall 12" long. Adjustment length is 9-1/2". Screw size is #8.
12 Side Mt Wind Adj Pr - 1290Dp0Chr - 9-1290Dp0Chrf1
Chrome plated zinc with black plastic knob. Overall 12" long. Adjustment length is 9-1/2". Screw size is #8.
12-1/2" Removable Bi-Color Light With Utility Light, 0 Degree Rake - 1211Dp2Chr - 9-1211Dp2Chrf1
USCG certified for use on sail or power driven vessels under 12 meter (39.4') 1 mile visibility3/4" diameter anodized aluminum tubesDeck illuminating utility light, 12 V bulb includedStow-a-way plug in type pole w/gold plated contacts
12-1/2" Removable Bi-Color Light With Utility Light, 5 Degree Rake - 1212Dp2Chr - 9-1212Dp2Chrf1
USCG certified for use on sail or power driven vessels under 12 meter (39.4') 1 mile visibility3/4" diameter anodized aluminum tubesDeck illuminating utility light, 12 V bulb includedStow-a-way plug in type pole w/gold plated contacts
12" Bi-Color Pole Light - 1612Dp2Blk - 9-1612Dp2Blkf1
USCG certified for use on power driven vessels under 12 meters (39.4 ft). length. 1 mile visibility. USCG, ABYC, NMMA Certified.Black plastic top. 3/4" dia. anodized aluminum tube. 12V bulb included. Requires 2 pin mounting base. Ideal for boats with casting decks on the bow. Can be unplugged and stowed while fishing. This leaves only a small, flat topped base.
12" Stealth Series Led Bi-Color Pole Light - 1617Dp2Blk - 9-1617Dp2Blkf1
Removable bi-color pole light. 12V. USCG certified for use on power vessels under 12 m (39.4 ft). One mile visibility. Stainless steel top, 3/4" diameter aluminum pole with 0° RakeStow-a-way plug-in type pole. Requires 2 pin mounting baseGold plated contactsDesigned to also fit most other manufacturer's basesLocking collar
12V Bi-Color Light - 1218Dp0Chr - 9-1218Dp0Chrf1
For use on power driven vessels under 12 meters (39.4ft.). One mile visibility. Certified for replacement use only. Chrome plated zinc alloy with flag staff socket. Red and Green lenses. Complete with 12 volt bulb. Screw size #8. I.D. socket is 3/4".
12V Bi-Color Light - 1310Dp0Chr - 9-1310Dp0Chrf1
For use on power driven vessels under 12 meters (39.4 ft.) in length. 1-mile visibility. USCG certified. Chrome plated top with black plastic base. 12V bulb included. Screw size is 8.
12V Comb Masthead All-Round 11.25"H - 1196Dp2Chr - 9-1196Dp2Chrf1
USCG Certified for use on sail or power driven vessels under 20 meters (65.6 ft.) in length. 3-mile visibility. Black plastic and chrome plated zinc alloy top, black plastic base and 3/4" diameter anodized aluminum tube. 1" x 2-5/8" base. Clear lenses. 12V bulbs in
12V Comb Masthead All-Round 3-3/16" H - 1183Dp0Chr - 9-1183Dp0Chrf1
USCG Certified for use on sail or power driven vessels under 20 meters (65.6 ft.) in length. 3-mile visibility. Black plastic and chrome plated zinc alloy top, black plastic base and 3/4" diameter anodized aluminum tube. 1" x 2-5/8" base. Clear lenses. 12V bulbs included. Screw size is 8.
12V Comb Masthead All-Round 5-1/16" H - 1196Dp1Chr - 9-1196Dp1Chrf1
USCG Certified for use on sail or power driven vessels under 20 meters (65.6 ft.) in length. 3-mile visibility. Black plastic and chrome plated zinc alloy top, black plastic base and 3/4" diameter anodized aluminum tube. 1" x 2-5/8" base. Clear lenses. 12V bulbs in
12V Comb Masthead All-Round L - 1181Dp0Chr - 9-1181Dp0Chrf1
USCG Certified for use on sail or power driven vessels under 20 meters (65.6 ft.) in length. 3-mile visibility. Black plastic and chrome plated zinc alloy top, black plastic base and 3/4" diameter anodized aluminum tube. Plastic adapters for flat or "V" type mount, contains notch for through-base wiring. Fold-down adjustable angle. Clear lenses. Height: 12-13/16". 12V bulbs included. Screw size is 8.
12V Comb Masthead All-Round L - 1184Dp0Chr - 9-1184Dp0Chrf1
USCG Certified for use on sail or power driven vessels under 20 meters (65.6 ft.) in length. 3-mile visibility. Black plastic and chrome plated zinc alloy top, black plastic base and 3/4" diameter anodized aluminum tube. Plastic adapters for flat or "V" type mount, contains notch for through-base wiring. Fold-down adjustable angle. Clear lenses. Height: 12-13/16". 12V bulbs included. Screw size is 8.
12V Hori Mount Sidelights Pr - 0963Dp0Chr - 9-0963Dp0Chrf1
USCG certified for use on sail or power driven vessels under 12 meters (39.4 ft.) in length. 1-mile visibility. Chrome plated brass top with black plastic base. 12V bulbs included. Screw size is 4.
12V Vert Mount Sidelight Pr - 1264Dp0Chr - 9-1264Dp0Chrf1
USCG Certified for replacement use on power driven vessels under 12 meters (39.4 ft.) in length. 1-mile visibility. Chrome plated zinc alloy with Black vinyl mounting gasket. 12V bulbs included. Screw size is 8.
12V Vert Side Light White 1Pr/Cd - 0254W00Dp1 - 9-0254W00Dp1F1
For use on power driven vessels under 20 meters (65.6 ft.) in length. 2-mile visibility. Plastic construction w/gold plated contacts. 12V bulbs included. Screw size is 8.
12V White Sidelights - Horiz. - 0253W00Dp1 - 9-0253W00Dp1F1
For use on power driven vessels under 20 meters (65.6 ft.) in length. 2-mile visibility. Plastic construction w/gold plated contacts. 12V bulbs included. Screw size is 8.
17" Bi-Color Pole Light - 1612Dp3Blk - 9-1612Dp3Blkf1
USCG certified for use on power driven vessels under 12 meters (39.4 ft). length. 1 mile visibility. USCG, ABYC, NMMA Certified.Black plastic top. 3/4" dia. anodized aluminum tube. 12V bulb included. Requires 2 pin mounting base. Ideal for boats with casting decks on the bow. Can be unplugged and stowed while fishing. This leaves only a small, flat topped base.
2 1/2 Pipe To Hose Adapter - 0076010Plb - 9-0076010Plbf1
Cast bronze. Meets requirements of USCG safety standards.
2 Mile Bow Light Chrome - 0252Mb0Dp1 - 9-0252Mb0Dp1F1
For use on power driven vessels under 20 meters (65.6 ft) in length. 2-mile visibility. Plastic construction. 12V bulb included. Screw size is 8.
2 Pipe To Hose Adapter - 0076009Plb - 9-0076009Plbf1
Cast bronze. Meets requirements of USCG safety standards.
2 X 2 Rem Pin Butt Hinges, 4 Hole #8 Fastener, 1 Pr. - 1293Dp4Chr - 9-1293Dp4Chrf1
Removable Pins.
2-1/2 Intake Water Strainer - 0493010Plb - 9-0493010Plbf1
Cast bronze. Designed for easy installation and cleaning. Features mounting lugs cast into both sides to assure universal mounting, four outside tie rods and a 316 stainless steel strainer basket to minimize electrolysis. Hinged lugs for cast bronze cover permit easy removal and cleaning of basket. Drain plug in bottom casting is provided for easy removal of sediment and draining for winterization. Ratio given for open area to pipe size.
2-1/2 X 2 Rem Pin Hinges, 6 Hole #8 Fastener, 1 Pr. - 1293Dp5Chr - 9-1293Dp5Chrf1
Removable Pins.
2-1/2 X 2-1/2 Rem Pin Hinges, 6 Hole #8 Fastener, 1 Pr. - 1293Dp6Chr - 9-1293Dp6Chrf1
Removable Pins.
2-1/2 X2-1/2 White Flush Loc - 0931Dp1Wht - 9-0931Dp1Whtf1
Chrome plated zinc and black plastic. Easily installs in 2" hole. Adjustment of latch bar is 3/8" to 3". Face plate is 2-1/2" x 2-1/2". For door thickness of 1/4" to 1-1/8". Locking latches are supplied with two keys.
2-1/2 X2-1/2 White Flush Loc - 0931Dp2Wht - 9-0931Dp2Whtf1
Chrome plated zinc and black plastic. Easily installs in 2" hole. Adjustment of latch bar is 3/8" to 3". Face plate is 2-1/2" x 2-1/2". For door thickness of 1/4" to 1-1/8". Locking latches are supplied with two keys.
2-1/2" Chrome Plated Bronze Door Hook - 0956Dp3Chr - 9-0956Dp3Chrf1
Chrome plated cast bronze.
2-1/2X2-1/2 Black Flush Latch - 0931Dp1Blk - 9-0931Dp1Blkf1
Chrome plated zinc and black plastic. Easily installs in 2" hole. Adjustment of latch bar is 3/8" to 3". Face plate is 2-1/2" x 2-1/2". For door thickness of 1/4" to 1-1/8". Locking latches are supplied with two keys.
2-1/2X2-1/2 Black Flush Latch - 0932Dp1Blk - 9-0932Dp1Blkf1
Chrome plated zinc and black plastic. Easily installs in 2" hole. Adjustment of latch bar is 3/8" to 3". Face plate is 2-1/2" x 2-1/2". For door thickness of 1/4" to 1-1/8". Locking latches are supplied with two keys.
2-1/2X2-1/2 Black Flush Latch - 0932Dp2Blk - 9-0932Dp2Blkf1
Chrome plated zinc and black plastic. Easily installs in 2" hole. Adjustment of latch bar is 3/8" to 3". Face plate is 2-1/2" x 2-1/2". For door thickness of 1/4" to 1-1/8". Locking latches are supplied with two keys.
2-1/2X2-1/2 Black Flush Lock - 0931Dp2Blk - 9-0931Dp2Blkf1
Chrome plated zinc and black plastic. Easily installs in 2" hole. Adjustment of latch bar is 3/8" to 3". Face plate is 2-1/2" x 2-1/2". For door thickness of 1/4" to 1-1/8". Locking latches are supplied with two keys.
2-1/4 X 2 Chr Flush Latch - 0922Dp0Chr - 9-0922Dp0Chrf1
Chrome plated zinc. Easily installs in 1-5/8" diameter hole. Face plate is 2-1/4" x 2". For door thickness of 1/2" to 3/4".
2-1/4 X 2 Chr Flush Lock Wkey - 0921Dp0Chr - 9-0921Dp0Chrf1
Chrome plated zinc. Easily installs in 1-5/8" diameter hole. Face plate is 2-1/4" x 2". For door thickness of 1/2" to 3/4".
2-1/4X1-1/2Shortside Offst Hi - 1214Dp1Chr - 9-1214Dp1Chrf1
Offset 3/8". 2 per card.#8 Fastener size.
2-1/8 X 1-1/2 Cupboard Bolt - 1101Dp0Chr - 9-1101Dp0Chrf1
Chrome plated zinc with black plastic slide and knob.
2-3/8 Door Stop & Holder - 0574Dp1Chr - 9-0574Dp1Chrf1
Chrome plated bronze with rubber bumper.
2" Bronze Seacock Body - 0805009Plb - 9-0805009Plbf1
Ball valve design. Cast bronze. Meets needs of applications that require long, scoop or flush type thru-hulls. NOT TO BE USED IN POTABLE WATER SYSTEMS.
2" Chrome Cap Only F/528 - 0528C0999A - 9-0528C0999Af1
For the 528 series deck plates. Chrome plated bronze. Comes complete with O-ring.
2" Chrome Plated Bronze Door Hook - 0956Dp2Chr - 9-0956Dp2Chrf1
Chrome plated cast bronze.
2" Diesel Pipe Deck Plate - 0528D09Chr - 9-0528D09Chrf1
Cast bronze, chrome plated. Comes complete with key, O-ring and retaining cable on cap. 2" and 2-1/2" sizes have 4 mounting holes. The 1-1/2" caps have a slot between holes. Screw size is 8. Use spare key series 1248 and spare O-ring series 513.
2" Intake Water Strainer - 0493009Plb - 9-0493009Plbf1
Cast bronze. Designed for easy installation and cleaning. Features mounting lugs cast into both sides to assure universal mounting, four outside tie rods and a 316 stainless steel strainer basket to minimize electrolysis. Hinged lugs for cast bronze cover permit easy removal and cleaning of basket. Drain plug in bottom casting is provided for easy removal of sediment and draining for winterization. Ratio given for open area to pipe size.
20" All-Round Telescoping Pole Light - 1311Dp2Chr - 9-1311Dp2Chrf1
USCG certified for use on power driven vessels under 20 meters (65.6 ft.) in length. 2-mile visibility. Black plastic top, chrome plated zinc alloy base 3/4" diameter anodized tube with locking collar, and 16 degree rake. Screw size is #8. 12V bulb 0337011DP included. Telescoping base (3-3/4" x 1-5/8") included. Spare Base #1059T00DP.
24 All Round Telescoping Pole Light - 1611Dp2Chr - 9-1611Dp2Chrf1
USCG certified for use on power driven vessels under 20 meters (65.6 ft.) in length. 2-mile visibility. Black plastic top, chrome plated zinc alloy base 3/4" diameter anodized tube with locking collar, and 16 degree rake. Screw size is 8. 12V bulb included. Telescoping mounting base included. Base: 3-3/4" x 1-5/8". Spare Base #1059T00DP.
24 All-Round Pole Light - 1330Dp2Chr - 9-1330Dp2Chrf1
USCG certified for use on power driven vessels under 20 meters (65.6 ft.) in length. 2-mile visibility. Black plastic top, chrome plated zinc alloy base 3/4" diameter anodized tube with locking collar, and 16 degree rake. Gold plated contacts. Screw size is 8. 2-Pin mounting base and 12V bulb included. Base: 3-3/4" x 1-5/8".
24" Universal Replacement All-Round Light - 1400Dp2Chr - 9-1400Dp2Chrf1
USCG certified for use on sail or power driven vessels under 20 meters (65.6 ft.) in length. 2-mile visibility. Replacement stowaway plug-in type w/gold plated contacts. Fits Perko 2-pin bases: 1059, 1060, 1046, 1047, and 1045. 12V bulb included. Bases not included.Pole replacement for series: 1430, 1630, 1631, 1640 and 1660 lights.
3 Chrome Plated Zinc Swivel Eye Hasp - 1194Dp0Chr - 9-1194Dp0Chrf1
Chrome plated zinc. Padlock eye swivels to act as latch. Padlock clearance is 11/32". Screw size is 6.
3 X 3 Rem Pin Butt Hinges, 6 Hole #10 Fastener, 1 Pr. - 1293Dp9Chr - 9-1293Dp9Chrf1
Removable Pins.
3-1/2" Chrome Plated Bronze Door Hook - 0956Dp5Chr - 9-0956Dp5Chrf1
Chrome plated cast bronze.
3-1/2" Round Bronze Strainer For 1" T-Hulls - 0086Dp3Plb - 9-0086Dp3Plbf1
Cast bronze. Screw size is #8. UL Listed. NOT TO BE USED IN POTABLE WATER SYSTEMS.
3-1/4 Od Lckr Ventilator - 0330Dp2Chr - 9-0330Dp2Chrf1
Chrome plated brass. Screw size is 6 R.H.
3" Chrome Plated Bronze Door Hook - 0956Dp4Chr - 9-0956Dp4Chrf1
Chrome plated cast bronze.
3" Round Bronze Strainer For 3/4" T-Hulls - 0086Dp2Plb - 9-0086Dp2Plbf1
Cast bronze. Screw size is #8. UL Listed. NOT TO BE USED IN POTABLE WATER SYSTEMS.
3/16 Plastic Cable Strap 10/B - 0196Dp1 - 9-0196Dp1F1
Black plastic that is ultra-violet stabilized for weather resistance. Eliminates need for insulating cushion. Width is 1/2". Conforms to USCG standards. 10 Per Card.
3/4 90 Deg. Pipe To Hose Adap - 0063Dp5Plb - 9-0063Dp5Plbf1
Cast bronze. Meets requirements of USCG safety standards.
3/4 Pipe To Hose Adapter - 0076Dp5Plb - 9-0076Dp5Plbf1
Cast bronze. Meets requirements of USCG safety standards.
3/4 Thru Hull Connection Bulk - 0328Dp5 - 9-0328Dp5F1
Molded white plastic with broad flange. For use with hose. Not recommended for use below waterline.
3/4 Thru Hull Connection Chr - 0350005Dpc - 9-0350005Dpcf1
Available in plain or chrome plated bronze, these fittings have a hose barb connection and are recommended for use above the waterline only. The flange is machined to fit the hull tightly and grooved to retain bedding compound. Minimum hull thickness 3/8".
3/4 Thru Hull Connection Pln - 0350005Dpp - 9-0350005Dppf1
Available in plain or chrome plated bronze, these fittings have a hose barb connection and are recommended for use above the waterline only. The flange is machined to fit the hull tightly and grooved to retain bedding compound. Minimum hull thickness 3/8".
3/4" Bronze Seacock Body - 0805005Plb - 9-0805005Plbf1
Ball valve design. Cast bronze. Meets needs of applications that require long, scoop or flush type thru-hulls.
3/4" Bronze Seacock W/90° Tail Piece - 0834005Plb - 9-0834005Plbf1
Includes: thru-hull, hose adapter, drain plug, four pre-drilled mounting holes and bonding screw. Incorporates a plastic ball and seat assuring a tight seal and ease of operation and drain plugs for winterizing. Handles are easily removed. Overall height is measured from the top of the hose adapter to the bottom of the flange.
3/4" Bronze Seacock W/Straight Tail Piece - 0835005Plb - 9-0835005Plbf1
Includes: thru-hull, hose adapter, drain plug, four pre-drilled mounting holes and bonding screw. Incorporates a plastic ball and seat assuring a tight seal and ease of operation and drain plugs for winterizing. Handles are easily removed. Overall height is measured from the top of the hose adapter to the bottom of the flange.
3/4" Intake Water Strainer - 0493005Plb - 9-0493005Plbf1
Cast bronze. Designed for easy installation and cleaning. Features mounting lugs cast into both sides to assure universal mounting, four outside tie rods and a 316 stainless steel strainer basket to minimize electrolysis. Hinged lugs for cast bronze cover permit easy removal and cleaning of basket. Drain plug in bottom casting is provided for easy removal of sediment and draining for winterization. Ratio given for open area to pipe size.
3/4" Scoop Thru Hull W/Nut - 0065Dp5Plb - 9-0065Dp5Plbf1
Cast bronze. Screw size is #8. Strainer is 3" x 4", except for 65DP7PLB which is 3-1/4" x 4-1/4". Includes nut. UL Listed. NOT TO BE USED IN POTABLE WATER SYSTEMS.
3/8 Plastic Cable Strap 10/B - 0196Dp4 - 9-0196Dp4F1
Black plastic that is ultra-violet stabilized for weather resistance. Eliminates need for insulating cushion. Width is 1/2". Conforms to USCG standards. 10 Per Card.
30" Universal Replacement All-Round Light - 1400Dp3Chr - 9-1400Dp3Chrf1
USCG certified for use on sail or power driven vessels under 20 meters (65.6 ft.) in length. 2-mile visibility. Replacement stowaway plug-in type w/gold plated contacts. Fits Perko 2-pin bases: 1059, 1060, 1046, 1047, and 1045. 12V bulb included. Bases not included.Pole replacement for series: 1430, 1630, 1631, 1640 and 1660 lights.
32" All-Round Telescoping Pole Light - 1311Dp4Chr - 9-1311Dp4Chrf1
USCG certified for use on power driven vessels under 20 meters (65.6 ft.) in length. 2-mile visibility. Black plastic top, chrome plated zinc alloy base 3/4" diameter anodized tube with locking collar, and 16 degree rake. Screw size is #8. 12V bulb 0337011DP included. Telescoping base (3-3/4" x 1-5/8") included. Spare Base #1059T00DP.
36 All-Round Pole Light - 1330Dp4Chr - 9-1330Dp4Chrf1
USCG certified for use on power driven vessels under 20 meters (65.6 ft.) in length. 2-mile visibility. Black plastic top, chrome plated zinc alloy base 3/4" diameter anodized tube with locking collar, and 16 degree rake. Gold plated contacts. Screw size is 8. 2-Pin mounting base and 12V bulb included. Base: 3-3/4" x 1-5/8".
36" Delta Pole Light - 1470Dp4Chr - 9-1470Dp4Chrf1
USCG certified for use on power driven vessels under 20 meters (65.6') in length. Includes two globes reduced glare globe and full output globe. Two collars large threaded collar and locking collar to fit 2-pin bases 1045, 1046, 1047, 1048, 1059 and 1060. Gold plated contacts. 2 screw positions for multiple base applications.
36" Universal Replacement All-Round Light - 1400Dp4Chr - 9-1400Dp4Chrf1
For use on sail or power driven vessels under 20 meters (65.6 ft.) in length. 2-mile visibility. Replacement stowaway plug-in type. Fits Perko 2-pin bases: 1059, 1060, 1046, 1047, and 1045. 12V bulb included. Bases not included.Pole replacement for series: 1430, 1630, 1631, 1640 and 1660 lights.
4 Chrome Plated Bronze T Hinges Pr - 0197Dp1Chr - 9-0197Dp1Chrf1
Chrome plated bronze.
4 Exterior Dome Light White - 1253Dp1Wht - 9-1253Dp1Whtf1
IVory PERKO-Kote zinc alloy. Double contact bayonet socket. Black vinyl mounting gasket. Push switch with water resistant boot. 12 volt bulb included.
4 Surface Mount Dome Light (1) - 0300Dp1Chr - 9-0300Dp1Chrf1
A double contact bayonet socket. Push switch with water resistant boot. Complete with 12 volt bulb. Chrome plated zinc. Screw size is 10 R.H., except for 0300DP2CHR which is 12 R.H.
4-1/2 Chromalex Cleat 2/Cd - 1306Dp1Chr - 9-1306Dp1Chrf1
Chrome plated zinc alloy with a Black plastic base.
4-1/2" Open Base Stud Mt. Cleat - 1316001Chr - 9-1316001Chrf1
Chrome plated zinc, plastic base. Stainless steel studs, nuts and washers.
4" Chrome Plated Bronze Door Hook - 0956Dp6Chr - 9-0956Dp6Chrf1
Chrome plated cast bronze.
4" Round Bronze Strainer For 1-1/4" & 1-1/2" T-Hulls - 0086Dp4Plb - 9-0086Dp4Plbf1
Cast bronze. Screw size is #8. UL Listed. NOT TO BE USED IN POTABLE WATER SYSTEMS.
42" Delta Pole Light - 1470Dp5Chr - 9-1470Dp5Chrf1
USCG certified for use on power driven vessels under 20 meters (65.6') in length. Includes two globes reduced glare globe and full output globe. Two collars large threaded collar and locking collar to fit 2-pin bases 1045, 1046, 1047, 1048, 1059 and 1060. Gold plated contacts. 2 screw positions for multiple base applications.
42" Universal Replacement All-Round Light - 1400Dp5Chr - 9-1400Dp5Chrf1
USCG certified for use on sail or power driven vessels under 20 meters (65.6 ft.) in length. 2-mile visibility. Replacement stowaway plug-in type w/gold plated contacts. Fits Perko 2-pin bases: 1059, 1060, 1046, 1047, and 1045. 12V bulb included. Bases not included.Pole replacement for series: 1430, 1630, 1631, 1640 and 1660 lights.
48" Delta Folding Pole Light - 1451Dp6Chr - 9-1451Dp6Chrf1
USCG certified for use on power driven vessels under 20 meters (65.6') in length. Includes two globes reduced glare globe and full output globe. Two collars large threaded collar and locking collar to fit 2-pin bases 1045, 1046, 1047, 1048, 1059 and 1060. Gold plated contacts. 2 screw positions for multiple base applications.
48" Delta Pole Light - 1470Dp6Chr - 9-1470Dp6Chrf1
USCG certified for use on power driven vessels under 20 meters (65.6') in length. Includes two globes reduced glare globe and full output globe. Two collars large threaded collar and locking collar to fit 2-pin bases 1045, 1046, 1047, 1048, 1059 and 1060. Gold plated contacts. 2 screw positions for multiple base applications.
48" Universal Replacement All-Round Light - 1400Dp6Chr - 9-1400Dp6Chrf1
USCG certified for use on sail or power driven vessels under 20 meters (65.6 ft.) in length. 2-mile visibility. Replacement stowaway plug-in type w/gold plated contacts. Fits Perko 2-pin bases: 1059, 1060, 1046, 1047, and 1045. 12V bulb included. Bases not included.Pole replacement for series: 1430, 1630, 1631, 1640 and 1660 lights.
5 Exterior Dome Light White - 1253Dp2Wht - 9-1253Dp2Whtf1
IVory PERKO-Kote zinc alloy. Double contact bayonet socket. Black vinyl mounting gasket. Push switch with water resistant boot. 12 volt bulb included.
5 Surface Mount Dome Light (1) - 0300Dp2Chr - 9-0300Dp2Chrf1
A double contact bayonet socket. Push switch with water resistant boot. Complete with 12 volt bulb. Chrome plated zinc. Screw size is 12 R.H.
5" Chrome Plated Bronze Door Hook - 0956Dp7Chr - 9-0956Dp7Chrf1
Chrome plated cast bronze.
5" Round Bronze Strainer For 2" T-Hulls - 0086Dp5Plb - 9-0086Dp5Plbf1
Cast bronze. Screw size is #8. UL Listed. NOT TO BE USED IN POTABLE WATER SYSTEMS.
5/16 Plastic Cable Strap 10/B - 0196Dp3 - 9-0196Dp3F1
Black plastic that is ultra-violet stabilized for weather resistance. Eliminates need for insulating cushion. Width is 1/2". Conforms to USCG standards. 10 Per Card.
5/8 Plastic Cable Strap 10/B - 0196Dp6 - 9-0196Dp6F1
Black plastic that is ultra-violet stabilized for weather resistance. Eliminates need for insulating cushion. Width is 1/2". Conforms to USCG standards. 10 Per Card.
5/8 Thru Hull Connection - 0328Dp4A - 9-0328Dp4Af1
Molded white plastic with broad flange. For use with hose. Not recommended for use below waterline.
5/8 Thru Hull Connection Chr - 0350004Dpc - 9-0350004Dpcf1
Available in plain or chrome plated bronze, these fittings have a hose barb connection and are recommended for use above the waterline only. The flange is machined to fit the hull tightly and grooved to retain bedding compound. Minimum hull thickness 3/8".
5/8 Thru Hull Connection Plb - 0350004Dpp - 9-0350004Dppf1
Available in plain or chrome plated bronze, these fittings have a hose barb connection and are recommended for use above the waterline only. The flange is machined to fit the hull tightly and grooved to retain bedding compound. Minimum hull thickness 3/8".
54" Delta Pole Light - 1470Dp7Chr - 9-1470Dp7Chrf1
USCG certified for use on power driven vessels under 20 meters (65.6') in length. Includes two globes reduced glare globe and full output globe. Two collars large threaded collar and locking collar to fit 2-pin bases 1045, 1046, 1047, 1048, 1059 and 1060. Gold plated contacts. 2 screw positions for multiple base applications.
54" Universal Replacement All-Round Light - 1400Dp7Chr - 9-1400Dp7Chrf1
USCG certified for use on sail or power driven vessels under 20 meters (65.6 ft.) in length. 2-mile visibility. Replacement stowaway plug-in type w/gold plated contacts. Fits Perko 2-pin bases: 1059, 1060, 1046, 1047, and 1045. 12V bulb included. Bases not included.Pole replacement for series: 1430, 1630, 1631, 1640 and 1660 lights.
6 Chromalex Cleat - 1306Dp2Chr - 9-1306Dp2Chrf1
Chrome plated zinc alloy with a Black plastic base.
6 Stern Chock Chrome Plated Bronze - 0119Dp6Chr - 9-0119Dp6Chrf1
Chrome plated bronze.
6" Open Base Stud Mt. Cleat - 1316002Chr - 9-1316002Chrf1
Chrome plated zinc, plastic base. Stainless steel studs, nuts and washers.
6" Round Bronze Strainer For 2-1/2" T-Hulls - 0086006Plb - 9-0086006Plbf1
Cast bronze. Screw size is #8. UL Listed. NOT TO BE USED IN POTABLE WATER SYSTEMS.
6" Strap Hinges Chrome Plated Brass, Pr. - 0120Dp2Chr - 9-0120Dp2Chrf1
Chrome plated bronze.
60" Delta Folding Pole Light - 1451Dp8Chr - 9-1451Dp8Chrf1
USCG certified for use on power driven vessels under 20 meters (65.6') in length. Includes two globes reduced glare globe and full output globe. Two collars large threaded collar and locking collar to fit 2-pin bases 1045, 1046, 1047, 1048, 1059 and 1060. Gold plated contacts. 2 screw positions for multiple base applications.
60" Delta Pole Light - 1470Dp8Chr - 9-1470Dp8Chrf1
USCG certified for use on power driven vessels under 20 meters (65.6') in length. Includes two globe reduced glare globe and full output globe. Two collars large threaded collar and locking collar to fit 2-pin bases 1045, 1046, 1047, 1048, 1059 and 1060. Gold plated contacts. 2 screw positions for multiple base applications.
7 12V Sealed Beam Unit - 043300312V - 9-043300312Vf1
Chrome plated brass head. Switch in head. Deck control chrome plated base. 4-1/2" sealed beam bulb included. 12 Volt.
7-1/8" White All-Round Light - 1301Dp0Chr - 9-1301Dp0Chrf1
USCG Certified for use on sail or power driven vessels under 20 meters (65.6 ft.) in length. 2-mile visibility. White translucent globe and black plastic top, black plastic base, and 3/4" diameter anodized aluminum tube. Fixed mount. 12V bulb included. Screw size is 8.
8-3/4X3-1/4 Step Plates (2/Cd - 1325Dp1Chr - 9-1325Dp1Chrf1
Chrome plated with soft black plastic pads.
8-3/8X2-1/4 Step Plates (2/Cd - 1325Dp0Chr - 9-1325Dp0Chrf1
Chrome plated with soft black plastic pads.
9-0618Dp0Sts Led Vertical Mount Side Lights - 0618Dp0Sts - 9-0618Dp0Stsf1
Certified for use on power driven vessels under 20 meters (65.6 ft). 2nm visibility. Stainless steel top with black polymer baseDesigned to be mounted only on a vertical surfaceMeets Global Specifications for: ABYC C-5, NMMA Type Accepted, EN/ISO 19009:2015, ABYC A-16, the '72 COLREGS and the U.S. Inland RulesScrew Size: #62.5 Watts, 0.21 AmpsMade in the USA
9-0625Dp0Sts Led Horizontal Mount Bi-Color Light - 0625Dp0Sts - 9-0625Dp0Stsf1
Certified for use on power driven vessels under 20 meters (65.6 ft). 2nm visibility. Polished stainless steel top with black polymer base, High tech, self contained LED modulesNew stylish low profile design. Similar footprint as the 0615/ 0616 LED lightsMeets Global Specs for: ABYC C-5, NMMA Type Accepted, EN/ISO 19009:2015, ABYC A-16 (2016), 1972 COLREGS, RCD 2013/53/EU, USCG 33 CFR 2nmScrew Size: #62.5 Watts, 0.21 ampsMade in the USA
9-0626Dp0Sts Led Horizontal Mount Side Lights - 0626Dp0Sts - 9-0626Dp0Stsf1
Certified for use on power driven vessels under 20 meters (65.6 ft.). 2nm visibility. Polished stainless steel top with black polymer base, High tech, self contained LED modulesNew stylish low profile design. Similar footprint as the 0615/ 0616 LED lightsMeets Global Specs for: ABYC C-5, NMMA Type Accepted, EN/ISO 19009:2015, ABYC A-16 (2016), 1972 COLREGS, RCD 2013/53/EU, USCG 33 CFR - 2nmScrew size: #62.5 Watts, 0.21 ampsMade in the USA
9-1658Dp1Alu Led White All-Round Light-Fixed Mount, 4" - 1658Dp1Alu - 9-1658Dp1Aluf1
Meets Current USA and European Standards for LED Navigation Lights. Certified 2nm visibility. Polymer Top and base with clear frosted lens3/4" Aluminum tube poleStylish high-tech design with self contained LED module. The LED optics adjust based on pole mount anglesMeets Global Specs for: ABYC C-5, NMMA Type Accepted, EN/ISO 19009:2015, ABYC A-16 (2016), 1972 COLREGS, RCD 2013/53/EU, USCG 33 CFR - 2nmScrew Size: #81.28 Watts, 0.10 AmpsMade in the USA
9-1658Dp2Alu Led White All-Round Light-Fixed Mount, 12" - 1658Dp2Alu - 9-1658Dp2Aluf1
Meets Current USA and European Standards for LED Navigation Lights. Certified 2nm visibility. Polymer Top and base with clear frosted lens3/4" Aluminum tube poleStylish high-tech design with self contained LED module. The LED optics adjust based on pole mount anglesMeets Global Specs for: ABYC C-5, NMMA Type Accepted, EN/ISO 19009:2015, ABYC A-16 (2016), 1972 COLREGS, RCD 2013/53/EU, USCG 33 CFR - 2nmScrew Size: #81.28 Watts, 0.10 Amps
9-1659Dp0Alu Tower Mount Led White All-Round Light, 4" - 1659Dp0Alu - 9-1659Dp0Aluf1
Meets Current USA and European Standards for LED Navigation Lights. Certified 2nm visibility. Polymer top and base with clear frosted lens3/4" aluminum tube poleStylish high-tech design with self contained LED module. LED optics adjust based on pole mount anglesMeets Global Specs for: ABYC C-5, NMMA Type Accepted, EN/ISO 19009:2015, ABYC A-16 (2016), 1972 COLREGS, RCD 2013/53/EU, USCG 33 CFR-2nmScrew Size: #81.28 Watts, 0.10 ampsMade in the USA
9-1670Dp0Alu Led White-All Round Light, Fold-Down Mount, 14" - 1670Dp0Alu - 9-1670Dp0Aluf1
Certified for use on power driven vessels under 20 meters (65.6 ft). 2nm visibility. Polymer Top and Base with Clear Frosted Lens3/4" silver aluminum polesStylish high-tech design with self-contained LED module. The LED optics adjust based on pole mount anglesMeets Global Specs for: ABYC C-5, NMMA Type Accepted, EN/ISO 19009:2015, ABYC A-16 (2016), 1972 COLREGS, RCD 2013/53/EU, USCG 33 CFR - 2nmIncludes both vertical mount base (installed) and a horizontal baseScrew Size: #81.28 Watts. 0.10 AmpsMade in the USA
9-1670Dp2Alu Led White-All Round Light, Fold-Down Mount, 24" - 1670Dp2Alu - 9-1670Dp2Aluf1
Certified for use on power driven vessels under 20 meters (65.6 ft). 2nm visibility. Polymer Top and Base with Clear Frosted Lens3/4" silver aluminum polesStylish high-tech design with self-contained LED module. The LED optics adjust based on pole mount anglesMeets Global Specs for: ABYC C-5, NMMA Type Accepted, EN/ISO 19009:2015, ABYC A-16 (2016), 1972 COLREGS, RCD 2013/53/EU, USCG 33 CFR - 2nmIncludes both vertical mount base (installed) and a horizontal baseScrew Size: #81.28 Watts. 0.10 AmpsMade in the USA
9-1672Dp0Alu Led White All-Round Led Light, Adjustable Folding Mount, 14" - 1672Dp0Alu - 9-1672Dp0Aluf1
Certified for use on power driven vessels under 20 meters (65.6 ft). 2nm visibility Polymer Top and Base with Clear Frosted Lens3/4" aluminum tube pole with quick adjustable baseStylish high-tech design with self contained LED module. The LED optics adjust based on pole mount anglesMeets Global Specs for: ABYC C-5, NMMA Type Accepted, EN/ISO 19009:2015, ABYC A-16 (2016), 1972 COLREGS, RCD 2013/53/EU, USCG 33 CFR - 2nmScrew Size: #81.28 Watts, 0.10 AmpsMade in the USA
Adjustable Deck Plate Key - 0826Dp0Chr - 9-0826Dp0Chrf1
Chrome plated zinc. Hardened steel pins. Will fit sizes up to 8" diameter.
All-Rd Pole Light White Horz Mt - 1134Dp0Chr - 9-1134Dp0Chrf1
USCG Certified for use on sail or power driven vessels under 20 meters (65.6 ft.) in length. 2-mile visibility. White translucent globe, black plastic base, and 3/4" diameter anodized aluminum tube. Plastic adapters for flat or "V" type mount, contains notch for through-base wiring. Fold-down adjustable angle. Height: 14". 12V bulb included. Screw size is 8.
All-Rd Pole Light White Vert Mt - 1137Dp0Chr - 9-1137Dp0Chrf1
USCG Certified for use on sail or power driven vessels under 20 meters (65.6 ft.) in length. 2-mile visibility. White translucent globe, black plastic base, and 3/4" diameter anodized aluminum tube. Plastic adapters for flat or "V" type mount, contains notch for through-base wiring. Fold-down adjustable angle. Height: 14". 12V bulb included. Screw size is 8.
All-Round Light Fold-Down Mt - 1634Dp0Chr - 9-1634Dp0Chrf1
USCG Certified for use on power driven vessels under 20 meters (65.6 ft.) in length. 2-mile visibility. Black plastic top with clear fluted lens and frosted globe, black plastic base, and 3/4" diameter anodized aluminum tube. Plastic adapters for flat or "V" type mount, contains notch for through-base wiring. 12V bulbs included. Screw size is 8.
All-Round Light Fold-Down Mt - 1637Dp0Chr - 9-1637Dp0Chrf1
USCG Certified for use on power driven vessels under 20 meters (65.6 ft.) in length. 2-mile visibility. Black plastic top with clear fluted lens and frosted globe, black plastic base, and 3/4" diameter anodized aluminum tube. Plastic adapters for flat or "V" type mount, contains notch for through-base wiring. 12V bulbs included. Screw size is 8.
Angled Flush Mount Rod Holder - 0452Dp0Sts - 9-0452Dp0Stsf1
Polished stainless steel flange, anodized aluminum tube, soft black liner and flange gasket with integral flip-up cap. Fasteners: #10.
Angled Flush Mount Rod Holder - 1205Dp0Chr - 9-1205Dp0Chrf1
Chrome plated zinc alloy flange, anodized aluminum tube, soft black liner and flange gasket with integral flip-up cap.
Battery Switch - 8501Dp - 9-8501Dpf1
Medium Duty. For use with two or more batteries and single or dual engine systems. Permits selection between batteries for starting and charging or operation of both batteries in parallel. They allow addition of an extra battery for use with accessories. The "OFF" position also acts as an emergency disconnect in the event of an electrical problem. Ignition protected. Surface mount. For use with systems under 50 volts. Capacity - 250 amps continuous, 360 amps intermittent. Size: 5-1/4 dia. x 2-5/8 deep. UL Listed.
Battswitch W/Alternator Disconnect - 8503Dp - 9-8503Dpf1
Medium Duty. For use with two or more batteries and single or dual engine systems. Permits selection between batteries for starting and charging or operation of both batteries in parallel. They allow addition of an extra battery for use with accessories. The "OFF" position also acts as an emergency disconnect in the event of an electrical problem. Ignition protected. Surface mount. For use with systems under 50 volts. Capacity - 250 amps continuous, 360 amps intermittent. Alternator Field Disconnect (AFD) Models, when used with non-utilized alternators, these models will interrupt the field current (reducing the possibility of damage) if turned "OFF" with the engine running. Size: 5-1/4 dia. x 2-5/8 deep. UL Listed.
Bi-Color Light -Black - 0252Bb0Dp1 - 9-0252Bb0Dp1F1
For use on power driven vessels under 20 meters (65.6 ft) in length. 2-mile visibility. Plastic construction. 12V bulb included. Screw size is 8.
Bicolor Light White 12V - 0252Wb0Dp1 - 9-0252Wb0Dp1F1
For use on power driven vessels under 20 meters (65.6 ft) in length. 2-mile visibility. Plastic construction. 12V bulb included. Screw size is 8.
Black Plastic Dek Plate Key - 124878Dp - 9-124878Dpf1
Plain zinc. 1-1/2" key has 1" spade on handle that allows them to fit many other slot type opening deck plates.
Black Plastic Gas Fill & Tank Vent W/Angled Neck - 1318Dpgblk - 9-1318Dpgblkf1
Plastic. Integral tank vent with flame arrestor. No plate key or ground wire required. Connects to 1-1/2" fill hose and 5/8" vent hose. Flip top cap. Use #10 screws.
Boat Cover Sockets - 0578Dp0Chr - 9-0578Dp0Chrf1
Chrome plated zinc sockets will accommodate 3/8" battens up to 1 3/4" wide. Measure 3 1/4"L x 5/8"W. #6 screw.
Butt Hinges - 0941Dp0Chr - 9-0941Dp0Chrf1
Chrome plated zinc. Screw size is #8. Overall width is 1-1/2". Open length is 1-1/2".
Canvas Snap Button, 100 Pack - 0896000Nkl - 9-0896000Nklf1
Nickel Plated Brass Canvas Snap Button, 100 Pack
Chromalex Cowl Ventilator - 1312Dp0Chr - 9-1312Dp0Chrf1
Chrome plated zinc cowl with black plastic base. 3" Duct hose threads into neck. Hose clamps not required. Mouth opening is 8 square inches. Screw size is #8.
Chromalex Gas Fill - 1313Dp0Chr - 9-1313Dp0Chrf1
Chrome plated zinc. Black plastic flange and cap. With strap. Grounding screw included. Use #6 fasteners.
Chromalex Locking Gas Cap - 1324Dp0Blk - 9-1324Dp0Blkf1
Black plastic cap with built-in five pin tumbler lock. Supplied with two keys. Gasketed to prevent possible moisture from entering the tank. This locking cap will fit all Perko Chromalex gas fills already in use. Skin packed.
Chromalex Locking Gas Fill - 1399Dp0Chr - 9-1399Dp0Chrf1
Chrome plated zinc. Black plastic flange and cap. With strap. Grounding screw included. Use #6 fasteners.
Chrome Plated Brass Gas Tank Vent F-1/2 Pip - 0515Dp4Chr - 9-0515Dp4Chrf1
Chrome plated bronze with removable 30 mesh, monel wire screen flame arrester. Designed to meet the requirements of the USCG safety standards for gasoline fuel systems.
Chrome Plated Brass Gas Tank Vent F-3/4 Hos - 0509Dp5Chr - 9-0509Dp5Chrf1
Removable 30 mesh stainless steel wire screen flame arrester. Designed to meet the requirements of the USCG safety standards for gasoline fuel systems.
Chrome Plated Brass Gas Tank Vent F-5/8 Hos - 0509Dp4Chr - 9-0509Dp4Chrf1
Removable 30 mesh stainless steel wire screen flame arrester. Designed to meet the requirements of the USCG safety standards for gasoline fuel systems.
Chrome Plated Brass Watertight Deck Connection - 1189Dp0Chr - 9-1189Dp0Chrf1
Rated for 15 amp at 12, 24, and 32 volts. Polarized double contact connector. Flange gasket with integral waterproof cap for base when plug is removed. Measures 1-5/8" diameter. 1-3/16" height. Screw size #6. Not ignition protected. Conforms to U.S.C.G. electrical standards.
Chrome Plated Zinc Rope Deck Pipe - 0757Dp0Chr - 9-0757Dp0Chrf1
Carded. Uses #8 fasteners.
Chrome Plated Zinc Watertight Electrical Deck Connection - 1190Dp0Chr - 9-1190Dp0Chrf1
Rated for 15 amp at 12, 24, and 32 volts. Polarized double contact connector. Flange gasket with integral waterproof cap for base when plug is removed. Measures 1-5/8" diameter. 1-3/16" height. Screw size #6. Not ignition protected. Conforms to U.S.C.G. electrical standards.
Clam Shell Ventilator - 0339Dp0Chr - 9-0339Dp0Chrf1
Chrome plated brass. Screw size is 6.
Clamp-On Fishing Rod Holder - 1215Dp0Chr - 9-1215Dp0Chrf1
Chrome plated zinc alloy with polished stainless steel tube, hard black plastic liner. Clamp-on feature eliminates drilling rail and simplifies relocation. Mounts on vertical or horizontal rails. 7/8" to 1" diameter and 3/4" diameter by reducing mounting bolt length.
Cleat 3" Chrome Plated Zinc 2/Cd - 0566Dp3Chr - 9-0566Dp3Chrf1
Chrome plated zinc alloy.
Cleat 4" Open Base Chrome Plated 2/Cd - 1188Dp4Chr - 9-1188Dp4Chrf1
Chrome plated zinc alloy.
Cleat 6" Open Base Chrome Plated - 1188Dp6Chr - 9-1188Dp6Chrf1
Chrome plated zinc alloy.
Cleat 8" Open Base Chrome Plated - 1188Dp8Chr - 9-1188Dp8Chrf1
Chrome plated zinc alloy.
Cockpit Scupper - 0285Dp - 9-0285Dpf1
Molded white plastic. Flush mount. For use when discharge is above waterline. Insert prevents passage of large objects without restricting water flow. Flange: 2-3/4" OD; 1-1/2" ID.
Cockpit Scupper - 0323Dp - 9-0323Dpf1
Thru-hull scupper with nut is used for mounting through the transom. Extra long length allows mounting on 2-1/8" thick surface, for use with 1-1/2" hose. Flange diameter 2-7/8"; white. Soft black flapper. Nut and mounting hardware included.
Comb Masthead/All-Round Light - 1125Dp4Chr - 9-1125Dp4Chrf1
USCG certified for use on sail or power driven vessels under 20 meters (65.6 ft.) in length. 3-mile visibility. Black plastic and chrome plated zinc alloy top, chrome plated brass base (3-3/8" x 2-1/4") with waterproof cover. Stowaway plug-in type with 3/4" diameter anodized aluminum tube & gold plated contacts. Deck mount. Clear lenses. 12V bulbs included. Screw size is 8.
Combination Gas Fill & Tank Vent W/Angled Neck - 0540Dpgchr - 9-0540Dpgchrf1
Angled neck. Chrome plated bronze cap. Black plastic body. Stainless steel beaded chain. Integral tank vent with flame arrestor and anti-surge valve. Deck plate key included.
Combination Gas Fill & Tank Vent W/Angled Neck - 0540G00Chr - 9-0540G00Chrf1
Angled neck. Chrome plated bronze cap. Black plastic body. Stainless steel beaded chain. Integral tank vent with flame arrestor and anti-surge valve. Deck plate key included.
Combination Gas Fill & Tank Vent W/Straight Neck - 0541Dpgchr - 9-0541Dpgchrf1
Straight neck. Chrome plated bronze cap. Black plastic body. Stainless steel beaded chain. Integral tank vent with flame arrestor and anti-surge valve. Deck plate key included.
Combo Gas Fill & Tank Vent-Bl - 0542Dpgblk - 9-0542Dpgblkf1
Angled neck. Integral tank vent with flame arrestor and anti-surge valve. Deck plate key included. Plastic body and cap.
Combo Gas Fill & Tank Vent-Wh - 0542Dpgwht - 9-0542Dpgwhtf1
Angled neck. Integral tank vent with flame arrestor and anti-surge valve. Deck plate key included. Plastic body and cap.
Compact Battery Switch No Lock - 8511Dp - 9-8511Dpf1
Compact, medium duty. Requires 1/3 less space to mount with the same bolt pattern as the standard size. Popular 90° easy-to-identify position rotation. For use with 12, 24, and 32 volt systems. Higher capacity - 315 continuous, and 450 intermittent. Smooth, positive position selector. UL listed Std. 1107, CE.4-3/4" Diameter, 1-7/8" Deep
Complete Liner W/Lip & Tube - 0482Dp1Blk - 9-0482Dp1Blkf1
For fishing rod holders.0482DP1BLK: Fits 0448#1, 0448D, 0452, 1205 rod holders0483DP1BLK: Fits 0449 rod holders.0483DP2BLK: Fits 0404#2 rod holders.
Complete Liner W/Lip & Tube - 0483Dp1Blk - 9-0483Dp1Blkf1
For fishing rod holders.0482DP1BLK: Fits 0448#1, 0448D, 0452, 1205 rod holders0483DP1BLK: Fits 0449 rod holders.0483DP2BLK: Fits 0404#2 rod holders.
Complete Liner W/Lip & Tube - 0483Dp2Blk - 9-0483Dp2Blkf1
For fishing rod holders.0482DP1BLK: Fits 0448#1, 0448D, 0452, 1205 rod holders0483DP1BLK: Fits 0449 rod holders.0483DP2BLK: Fits 0404#2 rod holders.
Cowl Ventilator - 0870Dp0Chr - 9-0870Dp0Chrf1
Chrome plated zinc. 3" duct threads into neck. Hose clamps not required. Cowl/Mouth opening is 7-1/3". Screw size is #10.
Cupboard Catch W/Flush Strike - 1102Dp1Chr - 9-1102Dp1Chrf1
Chrome plated zinc.Includes box strike.
Cupboard Catch W/Offset Strik - 1102Dp2Chr - 9-1102Dp2Chrf1
Chrome plated zinc. Spacer Included to Allow for Additional (3/16") Offset
Curtain Fastenener Flange Stud - 100 - 0994000Nkl - 9-0994000Nklf1
Nickel plated brass.
D.C. Bay Socket W/60 Pigtail - 0024Dp2 - 9-0024Dp2F1
For lights on vessels under 20 m. Plastic body, brass spring.
Deck Fill Waste For 1-1/2 Hose - 1269Dp0Chr - 9-1269Dp0Chrf1
Chrome plated zinc alloy. Black plastic cap, slotted between the holes. Complete with deck plate key (#1248-8DP) and O-ring.
Deck Fill Waste For 1-1/2 Pipe - 0524Dp0Chr - 9-0524Dp0Chrf1
Chrome plated bronze. Deck plate key (#1248-8DP) and O-ring included.
Deck Plate Key - 1247Dp0Blk - 9-1247Dp0Blkf1
Black plastic. Fits Perko 1-1/4" and 1-1/2" deck plates and many other "Slot" type opening deck plates 1-1/8" center-to-center of lugs, 1" spade length.
Door Button W/Spring - 1216Dp0Chr - 9-1216Dp0Chrf1
Chrome plated zinc with black plastic knob. 1216 has phosphor bronze tension spring and item 1217 comes without spring and requires a #8 oval-head pivot screw.
Door Catch - 0554Dp - 9-0554Dpf1
White plastic and chrome plated brass screws. Screw/stud is 3/4" x #8.
Door Catch 2Pc Male/Female - 559 - 9-0559F1
Black polymer catch and ball stud. Holds door firmly in place against vibration and motion. Stud size: 1-1/8" x 3/8", catch size: 1-3/8" x 7/8".
Door Catches (2/Card) - 0559Dp - 9-0559Dpf1
Black polymer catch and ball stud. Holds door firmly in place against vibration and motion. Stud size: 1-1/8" x 3/8", catch size: 1-3/8" x 7/8".
Double Contact Bayonet Light Socket - 0024Dp1 - 9-0024Dp1F1
For lights on vessels under 20 m. Plastic body, brass spring.
Double Contact Bayonet Socket - 0052Dp - 9-0052Dpf1
For discontinued lights. 11/16" OD.
Durable Type Fasteners-Stud100 - 0869000Sts - 9-0869000Stsf1
Stainless Snap Stud, 5/8" Screw, 100/Pk
Elbow Catch - 1056Dp0Chr - 9-1056Dp0Chrf1
Chrome plated zinc with stainless steel spring.
Fastener Thumbscrew Only - 071900099A - 9-071900099Af1
Chrome plated brass with black plastic knob. Screw size is 8. Angle width is 1". Angle length is 1-3/8".
Fender Locks (2/Cd) - 1299Dp0Chr - 9-1299Dp0Chrf1
Chrome plated zinc. Eye is to be permanently attached to fender line. ID eye is 3/8". OD flange is 1-1/2". Screw size is 8.
Flush Hatch Dog - 0777000Chr - 9-0777000Chrf1
For securely "Dogging" (fastening) deck hatches. Chrome plated brass and stainless steel lock nuts. Flush strike. O-ring seals for water resistance. Does not rattle when dogged down. Maximum hatch thickness 2".
Flush Hinge - 0272Dp0Chr - 9-0272Dp0Chrf1
Chrome plated stamped brass. Semi concealed, for overlay doors.
Flush Lifting Handle, Chrome/Bronze, Lg. - 0776Dp2Chr - 9-0776Dp2Chrf1
Flush Lifting Handle, Chrome/Bronze, Large
Flush Lifting Handle, Chrome/Bronze, Sm. - 0776Dp1Chr - 9-0776Dp1Chrf1
Flush Lifting Handle, Chrome/Bronze, Small
Flush Mount Drain For Pipe, Chrome/Bronze - 0361005Chr - 9-0361005Chrf1
Chrome plated bronze body w/brass screen. The exterior surface of the flange is machined flat and designed to be countersunk into the hull, resulting in a smooth external fit.
Flush Pull - 1221Dp0Chr - 9-1221Dp0Chrf1
Chrome plated zinc with black plastic finishing flange. Spring loaded. Can be mounted horizontally or vertically.
Flush Pulls Flush Latch, Black - 1092Dp3Blk - 9-1092Dp3Blkf1
For smooth and carpeted surfaces. Chrome plated zinc "T" handle and S.S. stem. Easily installs in a 2-1/2" diameter hole. All have a 3" diameter face plate. #3 Straight cam bar 1-1/4" - 1-7/8"
Flush Pulls Flush Latch, Black - 1092Dp4Blk - 9-1092Dp4Blkf1
For smooth and carpeted surfaces. Chrome plated zinc "T" handle and S.S. stem. Easily installs in a 2-1/2" diameter hole. All have a 3" diameter face plate. #4 Extra long offset cam bar 1/2" - 3"
Flush Pulls Flush Latch, White - 1092Dp1Wht - 9-1092Dp1Whtf1
For smooth and carpeted surfaces. Chrome plated zinc "T" handle and S.S. stem. Easily installs in a 2-1/2" diameter hole. All have a 3" diameter face plate.#1 Offset cam bar 3/4" - 2-3/8"
Flush Ring Catch - 1051Dp0Chr - 9-1051Dp0Chrf1
Chrome plated zinc with phosphor bronze spring.
Flushing Strainer, 1-1/4",Cast Bronze Strainer Includes A Fresh Water Port And A Smooth - 0593007Plb - 9-0593007Plbf1
Cast bronze strainer includes a fresh water port and a smooth, low-torque ball valve so you can switch from straining raw water to flushing with fresh water instantly. Can be used for inboard engines or generators. The handle indicates the flow direction and it uses standard Perko strainer repair parts. Top casting removes easily for basket cleaning. Can also be used in an emergency as an engine driven bilge pump. Reversible bulkhead mounting option. Made in USA. NOT TO BE USED IN POTABLE WATER SYSTEMS.
Fog Horn - 0162Dp0Wht - 9-0162Dp0Whtf1
Aluminum with white baked enamel finish and nylon mouthpiece. Conforms to ABYC standard A-23 in accordance with the 72 Colregs and US inland rules for use on vessels under 5 meters (16.4 feet).
Garboard Drain Plug - 0124000Plb - 9-0124000Plbf1
Cast bronze flange and brass plug. Complete with zinc plated steel wrench. Screw size is 10. Threaded neck is 1". Pipe size is 1". Flange O.D. is 3-1/8".
Garboard Drain Plugs - 0363Dp0Plb - 9-0363Dp0Plbf1
Cast bronze. Flange O.D. is 2-3/8". Pipe size is 3/4". Screw size is 8 where applicable. Neck is threaded.
Gas Fill - 1613Dp0Blk - 9-1613Dp0Blkf1
Fiber reinforced, UV stabilized Black plastic. No deck plate key or ground wire required. Easy grip cap. O-ring and cap retainer included.
Gas Tank Vent W/Elbow F-1/2 P - 0503Dp4Chr - 9-0503Dp4Chrf1
Chrome plated bronze with removable 30 mesh, monel wire screen flame arrester. Designed to meet the requirements of the USCG safety standards for gasoline fuel systems.
Gas Tank Vent W/Splash Shiel - 0506Dp4Chr - 9-0506Dp4Chrf1
Removable 30 mesh stainless steel wire screen flame arrester. Designed to meet the requirements of the USCG safety standards for gasoline fuel systems.
Hatch Fastener (1) - 0769Dp0Chr - 9-0769Dp0Chrf1
Chrome plated brass and zinc. Black plastic handle.
Hatch Fastener/Windshield Keeper - 0697Dp0Chr - 9-0697Dp0Chrf1
Chrome plated brass and zinc. Keeper is 1-1/2" x 5/8".
Hatch Pulls Flush Lock, White - 1091Dp1Wht - 9-1091Dp1Whtf1
For smooth and carpeted surfaces. Chrome plated zinc "T" handle and S.S. stem. Easily installs in a 2-1/2" diameter hole. All have a 3" diameter face plate.#1 Offset cam bar 3/4" - 2-3/8"
Hawse Hole Plate - 0752000Chr - 9-0752000Chrf1
Chrome plated bronze. Inside: 2-1/8 x 4-1/8".
Heavy Duty Battery Switch - 8603Dp - 9-8603Dpf1
For use with systems from 6-32 volts. Capacity - rated 380 amps continuous, 850 amps intermittent (5 minutes on, 5 minutes off). 1/2" Diameter brass battery terminals. UL Listed.
Hinge Butt 1-1/2 X 1-1/2" 1" - 0949Dp2Chr - 9-0949Dp2Chrf1
Removable pins. Screw size is #6. Plated stamped brass.
Hinge Hatch 12" Chrome 1Pr/C - 0762Dp2Chr - 9-0762Dp2Chrf1
Chrome plated brass. Screw size is 8.
Horizontal Mount Led Side Lights, Pair - 0616Dp2Sts - 9-0616Dp2Stsf1
USCG certified for use on power vessels up to 2nm 20M (65.6 Ft.) 12V, two nautical mileStainless steelUltra low profile with 1/2" vertical height2-1/2 Long x 2-5/8 Wide
Horz Mt Side Lights - Black - 0253B00Dp1 - 9-0253B00Dp1F1
For use on power driven vessels under 20 meters (65.6 ft.) in length. 2-mile visibility. Plastic construction w/gold plated contacts. 12V bulbs included. Screw size is 8.
Inlet Check Valve - 0635Dp0 - 9-0635Dp0F1
Valves designed for use with plastic or metal tanks Perko's patent pending "In-Pipe ICV" fits inside the pipe itselfIn-pipe ICVs mount inside standard 1-1/2" fill pipes near the connection to the fuel tankEliminates the need to retool existing doghouse on plastic tanksReplaces in-line ICVs, eliminating 4 hose clamps & 2 leak pointsAllows for full 18 GPM flow rates
Inset Hinges - 0271Dp0Chr - 9-0271Dp0Chrf1
Semi-concealed for inset doors. Stamped brass. 3/8" inset. #4 screw size.
Led 12V Chrome Sidelights Pr - 0602Dp1Chr - 9-0602Dp1Chrf1
For replacement use on power driven vessels under 20 meters (65.6 ft.) in length. 2-mile visibility. Available in chrome plated bronze or white epoxy coated bronze. Uses 10% of the energy draw of standard lights. Low heat, long life and water resistant. Vertical mount. Screw size is 8.
Led White All-Around Light - 1345Dp1Wht - 9-1345Dp1Whtf1
USCG Certified for use on power driven vessels under 20 meters (65.6 ft.) in length. 2-mile visibility. White plastic top with clear fluted lens and frosted globe, and 3/4" diameter anodized aluminum tube. L.E.D.'s use less than half the energy draw of standard lights, low heat, long life. Screw size is 8.
Left Hand Pull Apart Hinge - 0149Dp0Chr - 9-0149Dp0Chrf1
Chrome plated bronze. Use two left or two right hand hinges for quick removal of hatches, motor covers, or together as a heavy-duty hinge.
Light Bow Windshield Mount - 1123Dp1Chr - 9-1123Dp1Chrf1
USCG certified for use on sail or power driven vessels under 20 meters (65.6 ft.) in length. 3-mile visibility. Black plastic and chrome plated zinc alloy top, and chrome plated zinc alloy mounting bracket with waterproof cover. Stowaway plug-in type with 3/4" diameter anodized aluminum tube w/gold plated contacts. Plastic adapters for flat or "V" type 45° windshields. Clear lenses. 12V bulbs included. Screw size is 8.
Light Bow Windshield Mount - 1123Dp2Chr - 9-1123Dp2Chrf1
USCG certified for use on sail or power driven vessels under 20 meters (65.6 ft.) in length. 3-mile visibility. Black plastic and chrome plated zinc alloy top, and chrome plated zinc alloy mounting bracket with waterproof cover. Stowaway plug-in type with 3/4" diameter anodized aluminum tube w/gold plated contacts. Plastic adapters for flat or "V" type 45° windshields. Clear lenses. 12V bulbs included. Screw size is 8.
Light Bow Windshield Mount - 1124Dp2Chr - 9-1124Dp2Chrf1
USCG certified for use on sail or power driven vessels under 20 meters (65.6 ft.) in length. 3-mile visibility. Black plastic and chrome plated zinc alloy top, and chrome plated zinc alloy mounting bracket with waterproof cover. Stowaway plug-in type with 3/4" diameter anodized aluminum tube w/gold plated contacts. Plastic adapters for flat or "V" type 45° windshields. Clear lenses. 12V bulbs included. Screw size is 8.
Light Stern 12V Chrome - 1332Dp0Chr - 9-1332Dp0Chrf1
For use a replacement only on sail or power driven vessels under 20 meters (65.6 ft.) in length. 2-mile visibility. Chrome plated zinc alloy with black plastic base. Clear lens. 12V bulb included. Vertical mount. Screw size is 4.
Lock And Latch Cover, Black - 1089Dp1Blk - 9-1089Dp1Blkf1
Fiber reinforced plastic. Hinged, water resistant. Fits Perko 0931 and 0932.
Locking Battery Switch - 8502Dp - 9-8502Dpf1
Medium Duty. For use with two or more batteries and single or dual engine systems. Permits selection between batteries for starting and charging or operation of both batteries in parallel. They allow addition of an extra battery for use with accessories. The "OFF" position also acts as an emergency disconnect in the event of an electrical problem. Ignition protected. Surface mount. For use with systems under 50 volts. Capacity - 250 amps continuous, 360 amps intermittent. Size: 5-1/4 dia. x 2-5/8 deep. UL Listed.
Locking Gas Cap Black - 1324Dp1Blk - 9-1324Dp1Blkf1
Black plastic cap with built-in five pin tumbler lock. Supplied with two keys. Gasketed to prevent possible moisture from entering the tank. This locking cap will fit all Perko Chromalex gas fills already in use. Skin packed.
Locking Insert For Fuel Deck Fills - 0525Dp0Blk - 9-0525Dp0Blkf1
Black plastic with zinc alloy lock cylinder. Dual purpose key opens fill cap and locking insert. Fits most Perko® 1-1/2" vented fills
Mag Bronze Top Mt Rowlock Socket, Pr. - 0831Dp0Plb - 9-0831Dp0Plbf1
Plain manganese bronze. Screw size is #10.
Main Battery Switch - 9611Dp - 9-9611Dpf1
Compact, medium duty. Requires 1/3 less space to mount with the same bolt pattern as the standard size. Popular 90° easy-to-identify position rotation. For use with 12, 24, and 32 volt systems. Higher capacity - 315 continuous, and 450 intermittent. Smooth, positive position selector. UL listed Std. 1107, CE.4-3/4" Diameter, 1-7/8" Deep
Mortise Latch Set - 0960Dp0Chr - 9-0960Dp0Chrf1
Chrome plated zinc. Turn button lock. Screw size is #6. Case is 2-1/4" x 1-13/16". Escutcheon is 4-3/8" x 1-1/4". For door thickness of 1" to 1-3/8".
Mortise Lock Set - 0927Dp0Chr - 9-0927Dp0Chrf1
Chrome plated zinc. Locked by turn button from inside or key from outside. Screw size is #6. Escutcheon is 4-3/8" x 1-1/4". Case is 2-3/4" x 2". For door thicknesses of 1" to 1-3/8".
N.River Rowlock Horns Chrome, Chrome Plated Zinc, Pr. - 1227Dp0Chr - 9-1227Dp0Chrf1
Distance is 1-3/4" between horns.
Offset Hinges - 0942Dp0Chr - 9-0942Dp0Chrf1
Chrome plated zinc. Offset 3/8".#8 fastener size.
Open Base Cleat - 1252Dp0Chr - 9-1252Dp0Chrf1
Chrome plated zinc. Pre-drilled for 2 1/4" screws.
Perko 0066Dp1Plb 3-1/2" X 2-1/2" Scoop Strainer For 3/8" & 1/2" T-Hulls, Carded - 0066Dp1Plb - 9-0066Dp1Plbf1
Cast bronze. Screw size is #8. UL Listed. NOT TO BE USED IN POTABLE WATER SYSTEMS
Perko 0066Dp2Plb 5" X 3-1/4" Scoop Strainer, For 3/4" & 1" T-Hulls - 0066Dp2Plb - 9-0066Dp2Plbf1
Cast bronze. Screw size is #8. UL Listed. NOT TO BE USED IN POTABLE WATER SYSTEMS
Perko 0066Dp3Plb 6-1/4" X 4-1/2" Scoop Strainer, For 1-1/4" & 1-1/2" T-Hulls - 0066Dp3Plb - 9-0066Dp3Plbf1
Cast bronze. Screw size is #8. UL Listed. NOT TO BE USED IN POTABLE WATER SYSTEMS
Perko 0066Dp4Plb 8" X 5-1/8" Scoop Strainer, For 2" T-Hulls - 0066Dp4Plb - 9-0066Dp4Plbf1
Cast bronze. Screw size is #8. UL Listed. NOT TO BE USED IN POTABLE WATER SYSTEMS
Perko 0074Dp0Wht Clear Spare Lens F/945 - 0074Dp0Wht - 9-0074Dp0Whtf1
Clear replacement lens. Screw size: 4.
Perko 0125Dp0Blk Spare Cap For Light Base - 0125Dp0Blk - 9-0125Dp0Blkf1
Spare Screw Cap for 1209, 1125, 1123, 1125, 1273 & 1274 Lights
Perko 0170Bp0Dp1 Navigation Side Light, 12V, Red - 0170Bp0Dp1 - 9-0170Bp0Dp1F1
USCG Certified for use on sail or power driven vessels under 20 meters in length. 2 Mile visibility. 12V bulb included. Size: 2 1/2" L x 3 5/8" H x 4 1/8" W. Black Polymer Housing. Card packaged
Perko 0170Bsddp1 Navigation Side Light, Green, 12V - 0170Bsddp1 - 9-0170Bsddp1F1
USCG Certified for use on sail or power driven vessels under 20 meters in length. 2 Mile visibility. 12V bulb included. Size: 2 1/2" L x 3 5/8" H x 4 1/8" W. Black Polymer Housing. Card packaged
Perko 0170Wsndp1 Vertical Mt. Stern Light, White - 0170Wsndp1 - 9-0170Wsndp1F1
European style navigation light. USCG Certified for use on sail or power driven vessels under 20 meters (65.6 ft.) in length. 135° visibility arc. 12V. 2-1/2" L x 3-5/8" H x 4-1/8" W.
Perko 0211Mb0Dpb Led Base Mount Masthead Light, Black Housing - 0211Mb0Dpb - 9-0211Mb0Dpbf1
Certified for use on sail and power driven vessels under 20 meters (65.6 feet) in both USA and European Markets. Visibility 3nm. Black Polymer with Quality components designed for harsh marine environmentsMeets Global Specs for: ABYC C-5, NMMA Type Accepted, EN/ISO 19009:2015, ABYC A-16 (2016), 1972 COLREGS, RCD 2013/53/EU, USCG 33 CFR
Perko 0211Mb0Dpb Led Base Mount Masthead Light, White Housing - 0211Mb0Dpw - 9-0211Mb0Dpwf1
Certified for use on sail and power driven vessels under 20 meters (65.6 feet) in both USA and European Markets. Visibility 3nm. White Polymer with Quality components designed for harsh marine environmentsMeets Global Specs for: ABYC C-5, NMMA Type Accepted, EN/ISO 19009:2015, ABYC A-16 (2016), 1972 COLREGS, RCD 2013/53/EU, USCG 33 CFR
Perko 0260Dp0Lns Lens Set For Side Light - 0260Dp0Lns - 9-0260Dp0Lnsf1
Lens for Side Light
Perko 0281Dpalns Lens Set For Side Light - 0281Dpalns - 9-0281Dpalnsf1
Lens for Side Light
Perko 0284Dp0Clr Spare Stern Light Lens & Gasket, Clear - 0284Dp0Clr - 9-0284Dp0Clrf1
Fits 0939 & 0265 lights.
Perko 0322009Plb 2" Bronze Thru Hull W/Nut - 0322009Plb - 9-0322009Plbf1
Cast bronze. Flange is machined to fit hull and grooved to retain bedding compound. Neck is threaded to approximately 3/8" from flange. Includes flange nut. UL Listed. NOT TO BE USED IN POTABLE WATER SYSTEMS.
Perko 0322010Plb 2-1/2" Bronze Thru Hull W/Nut - 0322010Plb - 9-0322010Plbf1
Cast bronze. Flange is machined to fit hull and grooved to retain bedding compound. Neck is threaded to approximately 3/8" from flange. Includes flange nut. UL Listed. NOT TO BE USED IN POTABLE WATER SYSTEMS.
Perko 0322Dp4Plb 1/2" Bronze Thru Hull W/Nut - 0322Dp4Plb - 9-0322Dp4Plbf1
Cast bronze. Flange is machined to fit hull and grooved to retain bedding compound. Neck is threaded to approximately 3/8" from flange. Includes flange nut. UL Listed. NOT TO BE USED IN POTABLE WATER SYSTEMS.
Perko 0322Dp5Plb 3/4" Bronze Thru Hull W/Nut - 0322Dp5Plb - 9-0322Dp5Plbf1
Cast bronze. Flange is machined to fit hull and grooved to retain bedding compound. Neck is threaded to approximately 3/8" from flange. Includes flange nut. UL Listed. NOT TO BE USED IN POTABLE WATER SYSTEMS.
Perko 0322Dp6Plb 1" Bronze Thru Hull W/Nut - 0322Dp6Plb - 9-0322Dp6Plbf1
Cast bronze. Flange is machined to fit hull and grooved to retain bedding compound. Neck is threaded to approximately 3/8" from flange. Includes flange nut. UL Listed. NOT TO BE USED IN POTABLE WATER SYSTEMS.
Perko 0322Dp7Plb 1-1/4" Bronze Thru Hull W/Nut - 0322Dp7Plb - 9-0322Dp7Plbf1
Cast bronze. Flange is machined to fit hull and grooved to retain bedding compound. Neck is threaded to approximately 3/8" from flange. Includes flange nut. UL Listed. NOT TO BE USED IN POTABLE WATER SYSTEMS.
Perko 0322Dp8Plb 1-1/2" Bronze Thru Hull W/Nut - 0322Dp8Plb - 9-0322Dp8Plbf1
Cast bronze. Flange is machined to fit hull and grooved to retain bedding compound. Neck is threaded to approximately 3/8" from flange. Includes flange nut. UL Listed. NOT TO BE USED IN POTABLE WATER SYSTEMS.
Perko 0338Dp1Clr Spare Wedge Bulbs, 2/Card - 0338Dp1Clr - 9-0338Dp1Clrf1
For navigation lights on vessels under 20 m. in length.
Perko 0338Dp2Clr Spare Wedge Bulbs, 2/Card - 0338Dp2Clr - 9-0338Dp2Clrf1
For navigation lights on vessels under 20 m. in length.
Perko 0348009Plb Thru Hull Connector 2" Bronze - 0348009Plb - 9-0348009Plbf1
Cast bronze. Cast bronze. Flange is machined to fit hull and grooved to retain bedding compound. Neck is threaded to between 1" and 1-1/2" from flange. Includes flange nut. UL Listed. NOT TO BE USED IN POTABLE WATER SYSTEMS.
Perko 0348Dp5Plb Thru Hull Connector 3/4" Bronze - 0348Dp5Plb - 9-0348Dp5Plbf1
Cast bronze. Cast bronze. Flange is machined to fit hull and grooved to retain bedding compound. Neck is threaded to between 1" and 1-1/2" from flange. Includes flange nut. UL Listed. NOT TO BE USED IN POTABLE WATER SYSTEMS.
Perko 0348Dp6Plb Thru Hull Connector 1" Bronze - 0348Dp6Plb - 9-0348Dp6Plbf1
Cast bronze. Cast bronze. Flange is machined to fit hull and grooved to retain bedding compound. Neck is threaded to between 1" and 1-1/2" from flange. Includes flange nut. UL Listed. NOT TO BE USED IN POTABLE WATER SYSTEMS.
Perko 0348Dp7Plb Thru Hull Connector 1-1/4" Bronze - 0348Dp7Plb - 9-0348Dp7Plbf1
Cast bronze. Cast bronze. Flange is machined to fit hull and grooved to retain bedding compound. Neck is threaded to between 1" and 1-1/2" from flange. Includes flange nut. UL Listed. NOT TO BE USED IN POTABLE WATER SYSTEMS.
Perko 0447Dp1Chr Flush Mount Vertical Rod Holder - 0447Dp1Chr - 9-0447Dp1Chrf1
Vertical flush mounted with chrome plated bronze flange and stainless steel tube. Includes a hard black plastic liner.
Perko 0448Dp1Chr Flush Mount Angled Rod Holder - 0448Dp1Chr - 9-0448Dp1Chrf1
Angled flush mounted with chrome plated bronze flange and chrome plated brass tube. Includes a soft black liner and flange gasket with integral flip-up cap.
Perko 0456Dp6 1" In-Line Engine Flusher - 0456Dp6 - 9-0456Dp6F1
Simple as connecting a garden hose! Flush your boat engine safely and easily. Plastic construction, stainless steel spring. Transparent body allows for visual inspection of water flow. Check valve automatically shuts off hull intake when water pressure is applied. Adapter supplied with FlushPro makes winterizing easy.
Perko 0456Dp7 1-1/4" In-Line Engine Flusher - 0456Dp7 - 9-0456Dp7F1
Simple as connecting a garden hose! Flush your boat engine safely and easily. Plastic construction, stainless steel spring. Transparent body allows for visual inspection of water flow. Check valve automatically shuts off hull intake when water pressure is applied. Adapter supplied with FlushPro makes winterizing easy.
Perko 0457Dp6 Complete Flush Pro Kit, 1" - 0457Dp6 - 9-0457Dp6F1
Simple as connecting a garden hose! Flush your boat engine safely and easily. Plastic construction, stainless steel spring. Transparent body allows for visual inspection of water flow. Check valve automatically shuts off hull intake when water pressure is applied. Adapter supplied with FlushPro makes winterizing easy.
Perko 0457Dp7 Complete Flush Pro Kit, 1-1/4" - 0457Dp7 - 9-0457Dp7F1
Simple as connecting a garden hose! Flush your boat engine safely and easily. Plastic construction, stainless steel spring. Transparent body allows for visual inspection of water flow. Check valve automatically shuts off hull intake when water pressure is applied. Adapter supplied with FlushPro makes winterizing easy.
Perko 0500011Plb 500 Series Intake Water Strainer, 3" Pipe Size - 0500011Plb - 9-0500011Plbf1
Cast Bronze. Designed for easy installation and cleaning. Features include mounting lugs cast into both sides to assure universal mounting, four outside tie rods and a 316 stainless steel strainer basket to minimize electrolysis. Screen hole diameter of .079 inches and a 47% open area. Drain plug in the bottom casting. Clear polycarbonate cylinder.
Perko 0561Dp4Chr 90° Rotating Gas Tank Vent, Chrome/Black - 0561Dp4Chr - 9-0561Dp4Chrf1
Chrome plated zinc cap with zinc swivel elbow. Black plastic splash guard and removable 30 mesh, stainless steel wire screen flame arrester. Design allows elbow to be rotated to any position.
Perko 0647Dp0Chr Led Horizontal Mount Bi-Color Light, 2Nm Visibility - 0647Dp0Chr - 9-0647Dp0Chrf1
Certified for use on power driven vessels under 20 meters (65.6 feet) in both USA and European MarketsChrome Plated Zinc Alloy Top with Black Polymer BaseHigh tech, self contained LED modulesMeets Global Specs for: ABYC C-5, NMMA Type Accepted, EN/ISO 19009:2015, ABYC A-16 (2016), 1972 COLREGS, RCD 2013/53/EU, USCG 33 CFR - 2nm
Perko 0655Dp1Wht Led Bi-Color Light, White, Classic, 2Nm - 0655Dp1Wht - 9-0655Dp1Whtf1
High tech, self contained LED modules2-Mile (USCG 2nm) CertifiedMeets Global Specifications for: ABYC C-5, NMMA Type Accepted, EN/ISO 19009:2015, ABYC A-16, 1972 COLREGS, RCD 2013/53/EU & USCG 33 CFR - 2nm
Perko 0655Dp2Wht Led Bi-Color Light, Rounded White, 2Nm - 0655Dp2Wht - 9-0655Dp2Whtf1
High tech, self contained LED modules2-Mile (USCG 2nm) CertifiedMeets Global Specifications for: ABYC C-5, NMMA Type Accepted, EN/ISO 19009:2015, ABYC A-16, 1972 COLREGS, RCD 2013/53/EU & USCG 33 CFR - 2nm
Perko 0686000Kit The Odor Eater - Waste Tank Vent Filter Kit With Connectors. Bulk - 0686000Kit - 9-0686000Kitf1
The Odor Eater - Waste Tank Vent Filter Kit Contains: 1 x Odor Eater™ Cartridge, 1 x Mounting Strap, 2 x Mounting Clamps, 2 x Quick Connects, 2 x Hose AdaptersAdvanced quick disconnects make replacement "a snap". Advanced Patent Pending check valve eliminates odors from tank when changing the filter. High capacity media design, stops odor fast. Compatible with all waste systems or holding tank installations. Easy retrofit - compatible with older vessels. For vent hose size: 5/8" or 3/4". Bulk packaged.
Perko 0686Dp0Kit The Odor Eater - Waste Tank Vent Filter Kit With Connectors - 0686Dp0Kit - 9-0686Dp0Kitf1
The Odor Eater - Waste Tank Vent Filter Kit Contains: 1 x Odor Eater™ Cartridge, 1 x Mounting Strap, 2 x Mounting Clamps, 2 x Quick Connects, 2 x Hose Adapters.Advanced quick disconnects make replacement "a snap". Advanced Patent Pending check valve eliminates odors from tank when changing the filter. High capacity media design, stops odor fast. Compatible with all waste systems or holding tank installations. Easy retrofit - compatible with older vessels. For vent hose size: 5/8" or 3/4". Bulk packaged.
Perko 0686Dplspl The Odor Eater Waste Tank Vent Filter Launch Kit With Extra Replacement Cartridge. - 0686Dplspl - 9-0686Dplsplf1
Available for a limited time. The Odor Eater Waste Tank Vent Filter Launch kit with extra replacement cartridge. The Odor Eater - Waste Tank Vent Filter Kit with connectors. Advanced quick disconnects make replacement "a snap". Advanced Patent Pending check valve eliminates odors from tank when changing the filter. High capacity media design, stops odor fast. Compatible with all waste systems or holding tank installations. Easy retrofit - compatible with older vessels.For vent hose size: 5/8" or 3/4"
Perko 0714Dp1Plb Garboard Drain Plug - 0714Dp1Plb - 9-0714Dp1Plbf1
Cast bronze flange and brass plug. Flange O.D. is 2". Pipe size is 1/2".
Perko 0742Dp1 Spare Plug Only For 0714 & 0737 - 0742Dp1 - 9-0742Dp1F1
Cast bronze flange and brass plug. Flange O.D. is 2". Pipe size is 1/2".
Perko 0742Dp2 Spare Plug W/Pin For 0714 & 0737 - 0742Dp2 - 9-0742Dp2F1
Cast brass plug. Flange O.D. is 2". Pipe size is 1/2". DP2 models have a stainless steel pin.
Perko 0915Dp0Sts Horizontal Mount Side Lights (1 Pair) - 0915Dp0Sts - 9-0915Dp0Stsf1
For Replacement Use Only, 1 mile (USCG 1nm) Certified Use on Sail or Power Driven Vessels Under 12m (39.4 ft.) Polished stainless steel top, polymer base.Red and green lenses10 watts, .80 amps (each light)
Perko 0946Dp099A Lens & Gasket For 946 - 0946Dp099A - 9-0946Dp099Af1
Lens & Gasket for 946
Perko 0947Dp1Chr 3-7/16" Chrome Barrel Bolt - 0947Dp1Chr - 9-0947Dp1Chrf1
Chrome plated bronze body & high impact black nylon bulkhead keeper. Supplied with friction pad to eliminate rattle and provide smooth operation. Fastener #6. Bolt diameter 3/8". Bulkhead keeper easily installs in a 5/8" hole. Package includes both styles of keepers.
Perko 0947Dp2Chr 4-5/16" Chrome Barrel Bolt - 0947Dp2Chr - 9-0947Dp2Chrf1
Chrome plated bronze body & high impact black nylon bulkhead keeper. Supplied with friction pad to eliminate rattle and provide smooth operation. Fastener #6. Bolt diameter 3/8". Bulkhead keeper easily installs in a 5/8" hole. Package includes both styles of keepers.
Perko 0947Dp3Chr 5-1/4" Chrome Barrel Bolt - 0947Dp3Chr - 9-0947Dp3Chrf1
Chrome plated bronze body & high impact black nylon bulkhead keeper. Supplied with friction pad to eliminate rattle and provide smooth operation. Fastener #6. Bolt diameter 3/8". Bulkhead keeper easily installs in a 5/8" hole. Package includes both styles of keepers.
Perko 0955Dp0Sts Vertical Mount Side Lights, 1 Pair - 0955Dp0Sts - 9-0955Dp0Stsf1
For Replacement Use Only, 1 mile (USCG 1nm) Certified Use on Sail or Power Driven Vessels Under 12m (39.4 ft.) Polished stainless steel top, polymer base.Red and green lenses10 watts, .80 amps (each light)
Perko 0978Dp0Chr Cupboard Turn, Chrome Plated Zinc Alloy - 0978Dp0Chr - 9-0978Dp0Chrf1
Chrome Plated Zinc AlloyDimensions: 2-1/8" x 2-1/4"Screw Size: #6
Perko 1054Dpbblk Spare Vertical Mount, Black - 1054Dpbblk - 9-1054Dpbblkf1
Spare Vertical Mount, Black
Perko 1124Dp099A Base Only For 1124 Light - 1124Dp099A - 9-1124Dp099Af1
For use on sail or power driven vessels under 20 meters (65.6 ft.) in length. 3-mile visibility. Black plastic and chrome plated zinc alloy top, and chrome plated zinc alloy mounting bracket with waterproof cover. Stowaway plug-in type with 3/4" diameter anodized aluminum tube. Plastic adapters for flat or "V" type 45° windshields. Clear lenses. 12V bulbs included. Screw size is 8.
Perko 1144A00Blk Spare Knob & Stud W/Circlip - 1144A00Blk - 9-1144A00Blkf1
Spare Knob & Stud W/Circlip
Perko 1244Dp0Chr Barrel Bolt, Chrome Zinc - 1244Dp0Chr - 9-1244Dp0Chrf1
Chrome plated zinc alloy. Integral friction pad eliminates rattle and provides smooth operation.
Perko 1265Dp0Sts Led Horizontal Mount Stern Light, 2Nm - 1265Dp0Sts - 9-1265Dp0Stsf1
Certified for use on power driven vessels under 20 meters (65.6 feet) in both USA and European Markets Stainless Steel Cover and Black Polymer BaseNew High-Tech design with self contained LED modulesDirect replacement for PERKO® 0965 & 0946 lightsQuality components designed for harsh marine environmentsMeets Global Specs for: ABYC C-5, NMMA Type Accepted, EN/ISO 19009:2015, ABYC A-16 (2016), 1972 COLREGS, RCD 2013/53/EU, USCG 33 CFR - 2nm
Perko 1280Dp0Chr Flush Cup Rim Latch Set, W/Flush Strike, 3/4" - 1-1/8" Door - 1280Dp0Chr - 9-1280Dp0Chrf1
Chrome plated zinc. Sliding lock button. Reverse bevel with flush strike. Flush cup installs in 2" diameter hole. Supplied with black plastic spacer for optional surface mounting. Screw size for cup is #8, case is #6. OD cup is 2-1/4", case is 2-1/16" x 1-3/4". For door thickness of 3/4" to 1-1/8".
Perko 1309Dp0Chr Snap Type Fender Hooks, 2/Pk - 1309Dp0Chr - 9-1309Dp0Chrf1
Chrome plated zinc.
Perko 1331Dp0Chr Masthead Light, Chrome - 1331Dp0Chr - 9-1331Dp0Chrf1
USCG Certified For use on sail or power driven vessels under 20 meters (65.6 ft.) in length. 3-mile visibility. Chrome plated zinc alloy with black plastic base. Clear lens. 12V bulb included. Vertical mount. Screw size is 4.
Perko 1444Dp2Alu White All-Round Led Light, 24" - 1444Dp2Alu - 9-1444Dp2Aluf1
2-Mile (USCG 2nm) Certified for vessels under 20m Polymer Top and Base with Clear Frosted LensNew stylish high-tech design with self contained LED module3/4" aluminum tube poleLED optics adjust based on pole mount anglesFits all Perko® 0° and 5° plug-in mounting bases (1045,1046,1047, 1048, 1049,1060)Includes locking and large threaded collarsMeets Current USA and European Standards for LED Nav Lights
Perko 1444Dp3Alu White All-Round Led Light, 30" - 1444Dp3Alu - 9-1444Dp3Aluf1
2-Mile (USCG 2nm) Certified for vessels under 20mPolymer Top and Base with Clear Frosted LensNew stylish high-tech design with self contained LED module3/4" aluminum tube poleLED optics adjust based on pole mount anglesFits all Perko® 0° and 5° plug-in mounting bases (1045,1046,1047, 1048, 1049,1060)Includes locking and large threaded collarsMeets Current USA and European Standards for LED Nav Lights
Perko 1444Dp4Alu White All-Round Led Light, 36" - 1444Dp4Alu - 9-1444Dp4Aluf1
2-Mile (USCG 2nm) Certified for vessels under 20m 2-Mile (USCG 2nm) Certified for vessels under 20mPolymer Top and Base with Clear Frosted LensNew stylish high-tech design with self contained LED module3/4" aluminum tube poleLED optics adjust based on pole mount anglesFits all Perko® 0° and 5° plug-in mounting bases (1045,1046,1047, 1048, 1049,1060)Includes locking and large threaded collarsMeets Current USA and European Standards for LED Nav Lights
Perko 1444Dp5Alu White All-Round Led Light, 42" - 1444Dp5Alu - 9-1444Dp5Aluf1
2-Mile (USCG 2nm) Certified for vessels under 20m 2-Mile (USCG 2nm) Certified for vessels under 20mPolymer Top and Base with Clear Frosted LensNew stylish high-tech design with self contained LED module3/4" aluminum tube poleLED optics adjust based on pole mount anglesFits all Perko® 0° and 5° plug-in mounting bases (1045,1046,1047, 1048, 1049,1060)Includes locking and large threaded collarsMeets Current USA and European Standards for LED Nav Lights
Perko 1444Dp6Alu White All-Round Led Light, 48" - 1444Dp6Alu - 9-1444Dp6Aluf1
2-Mile (USCG 2nm) Certified for vessels under 20m 2-Mile (USCG 2nm) Certified for vessels under 20mPolymer Top and Base with Clear Frosted LensNew stylish high-tech design with self contained LED module3/4" aluminum tube poleLED optics adjust based on pole mount anglesFits all Perko® 0° and 5° plug-in mounting bases (1045,1046,1047, 1048, 1049,1060)Includes locking and large threaded collarsMeets Current USA and European Standards for LED Nav Lights
Perko 1444Dp7Alu White All-Round Led Light, 54" - 1444Dp7Alu - 9-1444Dp7Aluf1
2-Mile (USCG 2nm) Certified for vessels under 20m 2-Mile (USCG 2nm) Certified for vessels under 20mPolymer Top and Base with Clear Frosted LensNew stylish high-tech design with self contained LED module3/4" aluminum tube poleLED optics adjust based on pole mount anglesFits all Perko® 0° and 5° plug-in mounting bases (1045,1046,1047, 1048, 1049,1060)Includes locking and large threaded collarsMeets Current USA and European Standards for LED Nav Lights
Perko 1444Dp8Alu White All-Round Led Light, 60" - 1444Dp8Alu - 9-1444Dp8Aluf1
2-Mile (USCG 2nm) Certified for vessels under 20m 2-Mile (USCG 2nm) Certified for vessels under 20mPolymer Top and Base with Clear Frosted LensNew stylish high-tech design with self contained LED module3/4" aluminum tube poleLED optics adjust based on pole mount anglesFits all Perko® 0° and 5° plug-in mounting bases (1045,1046,1047, 1048, 1049,1060)Includes locking and large threaded collarsMeets Current USA and European Standards for LED Nav Lights
