Select Category
Brands
Water/Holding Tank 25 Gallon - 85-1532Wh - 100-851532Whf1
Todd's one piece molded water/holding tanks are tough and durable. Each tank fully complies with FDA regulation CFR 177.1520. Each tank satisfies all U.S.C.G. standards. SURPASS material tanks will not emit waste odors or change the taste of fresh potable water. All openings are female NPT (National Pipe Threads) and are located in the same relative position on one end of the tank. Supplied plugs make water tank or holding tanks complete. Instructions included.
Water/Holding Tank 35 Gallon - 85-1525Wh - 100-851525Whf1
Todd's one piece molded water/holding tanks are tough and durable. Each tank fully complies with FDA regulation CFR 177.1520. Each tank satisfies all U.S.C.G. standards. SURPASS material tanks will not emit waste odors or change the taste of fresh potable water. All openings are female NPT (National Pipe Threads) and are located in the same relative position on one end of the tank. Supplied plugs make water tank or holding tanks complete. Instructions included.
Water/Holding Tank 3Gl Boxed - 85-1859Wh - 100-851859Whf1
Todd's one piece molded water/holding tanks are tough and durable. Each tank fully complies with FDA regulation CFR 177.1520. Each tank satisfies all U.S.C.G. standards. SURPASS material tanks will not emit waste odors or change the taste of fresh potable water. All openings are female NPT (National Pipe Threads) and are located in the same relative position on one end of the tank. Supplied plugs make water tank or holding tanks complete. Instructions included.
Water/Holding Tank 6 Gallon - 85-1531Wh - 100-851531Whf1
Todd's one piece molded water/holding tanks are tough and durable. Each tank fully complies with FDA regulation CFR 177.1520. Each tank satisfies all U.S.C.G. standards. SURPASS material tanks will not emit waste odors or change the taste of fresh potable water. All openings are female NPT (National Pipe Threads) and are located in the same relative position on one end of the tank. Supplied plugs make water tank or holding tanks complete. Instructions included.
Water/Holding Tank 9 Gallon - 100-851667Wh - 100-851667Whf1
Todd's one piece molded water/holding tanks are tough and durable. Each tank fully complies with FDA regulation CFR 177.1520. Each tank satisfies all U.S.C.G. standards. SURPASS material tanks will not emit waste odors or change the taste of fresh potable water. All openings are female NPT (National Pipe Threads) and are located in the same relative position on one end of the tank. Supplied plugs make water tank or holding tanks complete. Instructions included.
Water/Waste Tank, 12 Gal. - 41215 - 114-041215F1
A wide selection of waste tank sizes ensures you the right fit for your boat or RV. All Moeller waste tanks meet the material and pressure specifications for sanitation tanks as called out in federal regulations. Each tank features a nominal wall thickness of 0.30 in (7.6 mm) to control odor which would otherwise permeate through the walls.
Water/Waste Tank, 25 Gal. - 41225 - 114-041225F1
A wide selection of waste tank sizes ensures you the right fit for your boat or RV. All Moeller waste tanks meet the material and pressure specifications for sanitation tanks as called out in federal regulations. Each tank features a nominal wall thickness of 0.30 in (7.6 mm) to control odor which would otherwise permeate through the walls.
Water/Waste Tank, 28 Gal. - 41229 - 114-041229F1
A wide selection of waste tank sizes ensures you the right fit for your boat or RV. All Moeller waste tanks meet the material and pressure specifications for sanitation tanks as called out in federal regulations. Each tank features a nominal wall thickness of 0.30 in (7.6 mm) to control odor which would otherwise permeate through the walls.
Water/Waste Tank, 39 Gal. - 41239 - 114-041239F1
A wide selection of waste tank sizes ensures you the right fit for your boat or RV. All Moeller waste tanks meet the material and pressure specifications for sanitation tanks as called out in federal regulations. Each tank features a nominal wall thickness of 0.30 in (7.6 mm) to control odor which would otherwise permeate through the walls.
Water/Waste Tank, 45 Gal. - 41245 - 114-041245F1
A wide selection of waste tank sizes ensures you the right fit for your boat or RV. All Moeller waste tanks meet the material and pressure specifications for sanitation tanks as called out in federal regulations. Each tank features a nominal wall thickness of 0.30 in (7.6 mm) to control odor which would otherwise permeate through the walls.
Waterbuster Cordless Pump - 818236 - 23-41404F1
This submersible pump is a great way to remove unwanted water from boats, pool covers, aquariums and sump pits. Convenient and safe because it needs no electrical cord. It runs up to 5 hours on three alkaline "D" batteries. Lifts water up to 40" and includes a 42" hose with garden hose adapter. Not for use as a permanent bilge pump.
Waterproof 12V Trolling Motor Plug - 426184-1 - 354-4261841F1
Trolling Motor Plug is constructed of injection molded PVC. Two 10-gauge wire leads. Receptacle fits 1-1/8" hole. 30A.
Waterproof 12V Trolling Motor Receptacle - 426183-1 - 354-4261831F1
Trolling Motor Plug is constructed of injection molded PVC. Two 10-gauge wire leads. 30A.
Waterproof Over 80" Universal Tail Light7-Function, Passenger Side - St16Rssch - 50-51931F1
Designed for 12V SystemsMeets the requirements of SAE/DOT/FMVSS/CMVSS standards when properly installedWaterproof construction, low profile designAcrylic lens, corrosion proof plastic housingIncludes separate ground wire with eyeletMount on 2" centersSize: 8.063" x 2.875" x 2.813"
Waterproof Over 80" Universal Tail Light8-Function, Driver Side - St17Rssch - 50-51921F1
Designed for 12V Systems Designed for 12V SystemsMeets the requirements of SAE/DOT/FMVSS/CMVSS standards when properly installedWaterproof construction, low profile designAcrylic lens, corrosion proof plastic housingIncludes separate ground wire with eyeletMount on 2" centersSize: 8.063" x 2.875" x 2.813"
Waterproof Playing Cards - 588811-1 - 354-5888111F1
Designed especially for marine use and are 100% plastic. New design features artwork of ship's figureheads. Very durable.
Waterproof Universal Mount Combination Tail Light Kit - Tl15Rksch - 50-51951F1
Kit Includes: License Plate Bracket, 25-ft Harness and Stainless steel mounting hardware Kit Includes: License Plate Bracket, 25-ft Harness and Stainless steel mounting hardwareDesigned for 12V SystemsMeets the requirements of SAE/DOT/FMVSS/CMVSS standards when properly installedWaterproof construction, low profile designAcrylic lens, corrosion proof plastic housingIncludes separate ground wire with eyeletMount on 2" centersPassenger side light is 7-Functions: Stop, Turn, Tail, Rear Clearance, Rear Reflex, Side Marker, and Side ReflexDriver side light is 8-Functions: Stop, Turn, Tail, Rear Clearance, Rear Reflex, Side Marker, Side Reflex and License IlluminatorSize: 8.063" x 2.875" x 2.813"
Waterproof Universal Mount Combination Tail Light7-Function, Passenger Side - St36Rssch - 50-51881F1
Designed for 12V SystemsMeets the requirements of SAE/DOT/FMVSS/CMVSS standards when properly installedWaterproof construction, low profile designAcrylic lens, corrosion proof plastic housingScrew-on lens, easy to change bulbsIncludes separate ground wire with eyeletMount on 2" centersSize: 7.875" x 3.25" x 2.875"
Waterproof Universal Mount Combination Tail Light8-Function, Driver Side - St37Rssch - 50-51871F1
Designed for 12V SystemsMeets the requirements of SAE/DOT/FMVSS/CMVSS standards when properly installedWaterproof construction, low profile designAcrylic lens, corrosion proof plastic housingScrew-on lens, easy to change bulbsIncludes separate ground wire with eyeletMount on 2" centersSize: 7.875" x 3.25" x 2.875"
Waterproofing W/Ptef, 22 Oz. - 81922 - 74-81922F1
Safe for all fabrics including Sunbrella®. Top rated waterproofing. PTEF® based formula. For boat covers, bimini tops, sail covers, clothing and tents. Does not change color or feel of fabric.
Waterproofing W/Ptef, Gal. - 081900N - 74-81900F1
Safe for all fabrics including Sunbrella®. Top rated waterproofing. PTEF® based formula. For boat covers, bimini tops, sail covers, clothing and tents. Does not change color or feel of fabric.
Waterproofing With Ptef, 22 Oz. - 081922Pc - 74-81922Cf1
Safe for all fabrics including Sunbrella®. Top rated waterproofing. PTEF® based formula. For boat covers, bimini tops, sail covers, clothing and tents. Does not change color or feel of fabric.
Waterproofing With Ptef, Gal. - 081900Nc - 74-81900Cf1
Safe for all fabrics including Sunbrella®. Top rated waterproofing. PTEF® based formula. For boat covers, bimini tops, sail covers, clothing and tents. Does not change color or feel of fabric.
Watson Gloves Blue Chip Gloves, Lg - 320 Large - 904-320Lf1
Resilient natural rubber latex coating Sure-grip crinkle finishPoly/cotton seamless knit shellErgonomic formSnug-fitting wrist
Watson Gloves Blue Chip Gloves, Md - 320 Medium - 904-320Mf1
Resilient natural rubber latex coating Sure-grip crinkle finishPoly/cotton seamless knit shellErgonomic formSnug-fitting wrist
Watson Gloves Blue Chip Gloves, Xl - 320 X-Large - 904-320Xlf1
Resilient natural rubber latex coating Sure-grip crinkle finishPoly/cotton seamless knit shellErgonomic formSnug-fitting wrist
Watson Gloves Grease Monkey® 5 Mil Nitrile Gloves, Lg - 5554Pf Large - 904-5554Pflf1
Black nitrilePowder-free5 mil thickness9.5" rolled cuff
Watson Gloves Grease Monkey® 5 Mil Nitrile Gloves, Md - 5554Pf Medium - 904-5554Pfmf1
Black nitrilePowder-free5 mil thickness9.5" rolled cuff
Watson Gloves Grease Monkey® 5 Mil Nitrile Gloves, Xl - 5554Pf X-Large - 904-5554Pfxlf1
Black nitrilePowder-free5 mil thickness9.5" rolled cuff
Watson Gloves Grease Monkey® 5 Mil Nitrile Gloves, Xxl - 5554Pf Xx-Large - 904-5554Pfxxlf1
Black nitrilePowder-free5 mil thickness9.5" rolled cuff
Watson Gloves Grease Monkey® 8 Mil Nitrile Gloves, Lg - 5555Pf Large - 904-5555Pflf1
Black heavyweight nitrilePowder-free8 mil thickness11" rolled cuff
Watson Gloves Grease Monkey® 8 Mil Nitrile Gloves, Md - 5555Pf Med - 904-5555Pfmf1
Black heavyweight nitrilePowder-free8 mil thickness11" rolled cuff
Watson Gloves Grease Monkey® 8 Mil Nitrile Gloves, Xl - 5555Pf X-Large - 904-5555Pfxlf1
Black heavyweight nitrilePowder-free8 mil thickness11" rolled cuff
Watson Gloves Grease Monkey® 8 Mil Nitrile Gloves, Xxl - 5555Pf Xx-Large - 904-5555Pfxxlf1
Black heavyweight nitrilePowder-free8 mil thickness11" rolled cuff
Watson Gloves Grease Monkey® Heavy Weight Latex Gloves, Xl - 5553Pf X-Large - 904-5553Pfxlf1
Blue heavyweight rubber latexTextured surfacePowder-free15 mil thickness11" rolled cuff
Watson Gloves Monkey Wrench™ 6 Mil Sure-Grip Nitrile Gloves, Lg - 5557Pf Large - 904-5557Pflf1
Orange heavyweight nitrile Powder-free6 mil thickness9.5" rolled cuffSure-grip textured pattern
Wax 'N' Grease Killer Gl - S80Gl - 95-S80Glf1
Every new fiberglass hull produced is released from the mold by a mold release wax. In order to obtain proper adhesion of paint this wax must be removed. The suggested method of use is to apply S-80 Wax "N" Grease Killer. Using two clean new cloths, wet one cloth with S-80. Wipe S-80 on with one hand in areas to be painted and follow immediately with dry cloth. Do this to the entire hull 2 times. All waxes will then be eliminated.
Wax 'N' Grease Killer Qt - S80Qt - 95-S80Qtf1
Every new fiberglass hull produced is released from the mold by a mold release wax. In order to obtain proper adhesion of paint this wax must be removed. The suggested method of use is to apply S-80 Wax "N" Grease Killer. Using two clean new cloths, wet one cloth with S-80. Wipe S-80 on with one hand in areas to be painted and follow immediately with dry cloth. Do this to the entire hull 2 times. All waxes will then be eliminated.
Wd-40 11 Oz. Smart Straw - 490040 - 140-490040F1
Penetrates deep to free up frozen or rusted metal parts. Displaces moisture. Non-conductive formula. Use it to dry out electrical and electronic equipment. Stops squeaks. Silicone free. Lubricates and protects metal against moisture and corrosive elements with an invisible barrier. Cleans tar, grease and adhesives.
Wd-40 18 Oz. Smart Straw - 490095 - 140-490095F1
Penetrates deep to free up frozen or rusted metal parts. Displaces moisture. Non-conductive formula. Use it to dry out electrical and electronic equipment. Stops squeaks. Silicone free. Lubricates and protects metal against moisture and corrosive elements with an invisible barrier. Cleans tar, grease and adhesives.
Wd-40 8 Oz. Smart Straw - 430026 - 140-490026F1
Penetrates deep to free up frozen or rusted metal parts. Displaces moisture. Non-conductive formula. Use it to dry out electrical and electronic equipment. Stops squeaks. Silicone free. Lubricates and protects metal against moisture and corrosive elements with an invisible barrier. Cleans tar, grease and adhesives.
Wd40 Bulk Liquid, Gal., Low Voc - 490118 - 140-490118F1
Penetrates deep to free up frozen or rusted metal parts. Displaces moisture. Non-conductive formula. Use it to dry out electrical and electronic equipment. Stops squeaks. Silicone free. Lubricates and protects metal against moisture and corrosive elements with an invisible barrier. Cleans tar, grease and adhesives.
Weather Deck Fuse Panel 4 Pos Gray - 4304-Bss - 661-4304F1
Water resistant to IP67. Constructed from corrosion resistant materials. Concealed mounting screw holes. Integrated switch guards prevent accidental switching. UV tested faceplate. Rugged UV rated waterproof boots. Panel can be mounted in four different orientations. Illuminated circuit labels provide visibility in low light conditions. Bi-colored LED's. Panel cumulative rating of 45 amperes.
Weather Resistant Rubber Boot And Mounting Nut - 83288-Bp - 12-83288Bpf1
Allows entry of key. Adds a level of weather-resistance to ignition switches. Provides protection from moisture, dirt, salt, etc. Chrome-plated brass knurled nut. Used on switch #'s M50014 & M71209. Fits any ignition switch with 13/16"-24 mounting stem.
Weatherdeck Breaker Panel 12Vac 4 Pos Gray - 4374-Bss - 661-4374F1
Designed for flybridge and open cockpit applications. For 12 or 24 V systems. Constructed from corrosion resistant materials, the panel front withstands rain, sea spray, and hose spray wash down. Independent label backlighting circuit for remote switching and dimming. Compatible with all BSS digital dimmers. Rugged UV stabilized waterproof boots protect toggle switches and push button thermal circuit breakers.
Weatherdeck Breaker Panel 12Vac 6 Pos Gray - 4376-Bss - 661-4376F1
Designed for flybridge and open cockpit applications. For 12 or 24 V systems. Constructed from corrosion resistant materials, the panel front withstands rain, sea spray, and hose spray wash down. Independent label backlighting circuit for remote switching and dimming. Compatible with all BSS digital dimmers. Rugged UV stabilized waterproof boots protect toggle switches and push button thermal circuit breakers.
Weatherdeck Toggle Switch Boot - 4138-Bss - 661-4138F1
Toggle boot replaces the dress nut for mounting on Weatherdeck Breaker Panel switches. It features nickel plated brass threads w/UV resistant black silicone rubber and has a waterproof rating of IP67 for immersion up to 30 minutes.
Weatherproof Cover For 6364Crv - 7715Elrv - 679-7715Elrvf1
Weatherproof cover with Easy Lock ring for female connector 6364CRV.
Weatherproof Cvr. For 305Crv - 103Elrv - 679-103Elrvf1
Exclusive contoured covers provide a superior weatherproof seal and a better grip.
Weatherseal Tape - Mdr-370 - 79-Mdr370F1
A closed-cell foam tape that seals out moisture, weather, sound and fumes. PVC foam 1/8" thick tape is ideal for cushioning windows and doors. Absorbs shock and eliminates vibration. Self adhesive.
Weaver 1001 1-Part Pvc Glue, 30 Ml - Pvc1001 - 957-1001F1
To be used for temporary repair and patches only. DO NOT use for Davits or Handles.
Weaver 2001 Glue For Hypalon Inflatables, 8 Oz. - 2001 Canadian Whmis - 957-2001F1
Glue for gluing on rubber pads onto Hypalon inflatables.
Weaver 3001 Glue For Pvc Inflatables, 8 Oz. - 3001 Canadian Whmis - 957-3001F1
Glue for gluing on rubber pads onto PVC inflatables.
Weaver 957-Rbd100Garct2 Transom Arc Davits For Inflatables, 18" Tubes - Rbd100G-Arc2 - 957-Rbd100Garct2F1
The Arc transfers the weight of heavier outboards from the transom of the inflatable to the swim platform. The stainless steel Arc is built to be removed when not in use. The Arc snaps easily into the davit head on the swim platform. Includes a special receiver bracket that mounts on the inflatable transom. It's simple receiver release pin allows for easy removal and storage.Weaver worksheet must be filled out as this product is custom tailored.Visit weaverindustries.com for Additional Info & Measurement Instructions
Weaver Arcf Front Arc - Frontarc - 957-Arcff1
A fully adjustable 3-point mounting pad unit that glues to the fiberglass floor of inflatable dinghies. The unique design allows for a wide variety of adjustment points for most modern inflatables. A valuable companion to the Weaver Arc that is mounted on the transom. Together, the Weaver Arc and the Weaver Front Arc are highly effective in transferring the weight of inflatables to the Weaver Snap Davits.Weaver worksheet must be filled out as this product is custom tailored.Visit weaverindustries.com for Additional Info & Measurement Instructions
Weaver Arct1 Transom Arc Davits For Inflatables, 16"-17" Tubes - Arc1 - 957-Arct1F1
The Arc transfers the weight of heavier outboards from the transom of the inflatable to the swim platform. The stainless steel Arc is built to be removed when not in use. The Arc snaps easily into the davit head on the swim platform. Includes a special receiver bracket that mounts on the inflatable transom. It's simple receiver release pin allows for easy removal and storage.Weaver worksheet must be filled out as this product is custom tailored.Visit weaverindustries.com for Additional Info & Measurement Instructions
Weaver Arct2 Transom Arc Davits For Inflatables, 18" Tubes - Arc2 - 957-Arct2F1
The Arc transfers the weight of heavier outboards from the transom of the inflatable to the swim platform. The stainless steel Arc is built to be removed when not in use. The Arc snaps easily into the davit head on the swim platform. Includes a special receiver bracket that mounts on the inflatable transom. It's simple receiver release pin allows for easy removal and storage.Weaver worksheet must be filled out as this product is custom tailored.Visit weaverindustries.com for Additional Info & Measurement Instructions
Weaver C1000Rem Standard Dinghy Chocks, 4/Pk - C1000Crem - 957-C1000Remf1
Universal chocks for mounting a hard bottomed dinghy on the deck or bridge of a yacht. Standard: Pads go back and forth in one direction.
Weaver C1204Rem Swivel (Removable) Dinghy Chocks, 4/Pk - C1204Crem - 957-C1204Remf1
Universal chocks for mounting a hard bottomed dinghy on the deck or bridge of a yacht. Swivel: Pads swivel in any direction and can be adjusted up by using spacer bolts (sold separately). Removable: Includes Removable bases that let you remove the stanchions from your deck or bridge if you have an area you use for other purposes.
Weaver C1207Rem Swivel (Removable) Dinghy Chocks, 4/Pk - C1207Crem - 957-C1207Remf1
Universal chocks for mounting a hard bottomed dinghy on the deck or bridge of a yacht. Swivel: Pads swivel in any direction and can be adjusted up by using spacer bolts (sold separately). Removable: Includes Removable bases that let you remove the stanchions from your deck or bridge if you have an area you use for other purposes.
Weaver C1208Rem Swivel (Removable) Dinghy Chocks, 4/Pk - C1208Crem - 957-C1208Remf1
Universal chocks for mounting a hard bottomed dinghy on the deck or bridge of a yacht. Swivel: Pads swivel in any direction and can be adjusted up by using spacer bolts (sold separately). Removable: Includes Removable bases that let you remove the stanchions from your deck or bridge if you have an area you use for other purposes.
Weaver Csbolt Standard Spacer Bolts For Chocks - Csbolt - 957-Csboltf1
Designed to retrofit pads to a different height. Spacer Bolts to raise the pads up on the C1204, C1207 and C1208 chocks.
Weaver Csbolt1 1" Spacer Bolts For Chocks - 1-Boltext - 957-Csbolt1F1
Designed to retrofit pads to a different height. Spacer Bolts to raise the pads up on the C1204, C1207 and C1208 chocks.
Weaver Csbolt2 2" Spacer Bolts For Chocks - 2-Boltext - 957-Csbolt2F1
Designed to retrofit pads to a different height. Spacer Bolts to raise the pads up on the C1204, C1207 and C1208 chocks.
Weaver Csbolt3 3" Spacer Bolts For Chocks - 3-Boltext - 957-Csbolt3F1
Designed to retrofit pads to a different height. Spacer Bolts to raise the pads up on the C1204, C1207 and C1208 chocks.
Weaver Csbolt4 4" Spacer Bolts For Chocks - 4-Boltext - 957-Csbolt4F1
Designed to retrofit pads to a different height. Spacer Bolts to raise the pads up on the C1204, C1207 and C1208 chocks.
Weaver Dhs Davit Head For 7'-9' Hard-Shelled Dinghies - Dhs - 957-Dhsf1
The Dinghy side of the Weaver Davit Systems for fiberglass dinghies.
