Sea-Dog Line
Outboard Motor Flush quickly flushes away salt, sand, minerals, and contaminates from your lower unit cooling system, extending the engine's service life. Easy-to-use molded PVC cups deliver fresh wat... More Details
Power Socket with Battery Clips is constructed of injection molded nylon and stamped brass. Battery clip adapter allows for the temporary use of 12V power accessories on small boats without a built-in... More Details
Injection molded ABS. Fits all Sea-Dog Line power sockets.... More Details
Power Socket with Plug easily adds 12V power almost anywhere. Socket set is constructed of injection molded nylon & ABS. Plug features stamped brass contacts. Maximum: 12VDC, 16A. Installs with two #8... More Details
Plug features stamped brass contacts. Maximum: 12VDC, 16A.... More Details
Adds 12V power almost anywhere. Socket is constructed of injection molded nylon & ABS. Maximum: 12VDC, 16A. Installs with two #8 FH fasteners (not included).... More Details
These Illuminating Rocker Switches are constructed of durable injection molded nylon and stamped brass. Illuminates in the ON position. Easy to install by simply snapping into a standard 7/8" x 1-7/16... More Details
In-Line Water Strainer contains a removable, clear lens for easy cleaning and changing of filter. Filter is interchangeable with Jabsco. Filter should be mounted above water level line and on suction ... More Details
In-Line Water Strainer contains a removable, clear lens for easy cleaning and changing of filter. Filter is interchangeable with Jabsco. Filter should be mounted above water level line and on suction ... More Details
In-Line Water Strainer contains a removable, clear lens for easy cleaning and changing of filter. Filter is interchangeable with Jabsco. Filter should be mounted above water level line and on suction ... More Details
Four Position Ignition Switch is constructed of polypropylene. For accessory, off, ignition, and start functions. 13/16" diameter long shaft. Maximum panel thickness: 1-1/8. Four screw or four blade t... More Details
Three Position Magneto Style Ignition Switch is constructed of polypropylene. For off, ignition, start, and choke functions. 13/16" diameter short shaft for a maximum panel thickness: 5/8. Six screw o... More Details
Made of molded rubber.... More Details
Polarized Electrical Outlet is constructed with an injection molded thermo plastic body and cap, with machined brass polarized pins. For use as a 4-conductor deck cable outlet. Pins are sized differen... More Details
The Plugmate™ wrench features multiple deck keys. Fits standard garboard plugs as well as "T" style plugs. Constructed of durable injection molded polypropylene. Includes one replacement plug stored i... More Details
Vertically mounted, this will protect cables and electrical wiring on items such as depth sounders, speedometers and coax when passing through transom holes. 304 stainless steel. Carded.... More Details
Oarlocks are ideal for light service duty. 1/2" shank. Recommended for freshwater use. Die cast chrome plated zinc construction.... More Details
Injection molded polypropylene. Reduces 5/8" oarlock socket down to 1/2".... More Details
Constructed of UV resistant black injection molded nylon. These Windshield Latches are used to secure windshield doors with a simple twist design. Prevents rattling due to engine vibration at high spe... More Details
A complete selection of nylon top fittings for repair and new tops.... More Details
Top Fitting inserts for 1" square tubing are constructed of UV stabilized injection molded nylon. Top Fittings create an attachment point and function as a pivot point as part of a Bimini top system. ... More Details
Nylon Head Screw-1/4"-20 X 7/8", Black Pr... More Details
Nylon Head Screw-1/4" -20 X 7/8", White Pr... More Details
Molded nylon. Drain tube 1-1/8".... More Details
Constructed of injection molded nylon fairleads designed with a molded-in recess in the base to trap adhesive sealant in place providing a more watertight seal. This fairlead has the addition of a sta... More Details
Molded nylon. Designed to fit securely in a 1" hole without the use of fasteners. The ridges on the body of the drain plug are designed to keep the plug in place. Sealant should be applied prior to in... More Details
This Drain Plug was designed with a molded-in recess in the base to trap sealant and provide a more watertight seal. For transom installation, baitwells, ice chests, tanks, etc. 1" with gasket. UV res... More Details
This Drain Plug was designed with a molded-in recess in the base to trap sealant and provide a more watertight seal. For transom installation, baitwells, ice chests, tanks, etc. 1" with gasket. UV res... More Details
Deck Hinges are designed to mount horizontally and attach an eye end secured to tubing in Bimini top applications. Constructed of UV stabilized injection molded nylon. All Top Mount Hinge Fittings ins... More Details
The Wave Rocker Switch Breaker Panel is constructed of injection molded nylon. Features five ignition protected, illuminating SPST On/Off rocker switches and five thermal resettable breakers (two 3A, ... More Details
UL Cable Clamp are used to bundle, organize, and protect cable and wire runs, as well as simplify installation and maintenance. Constructed of UV stabilized injection molded nylon. Temperature Rating:... More Details
UL Cable Clamp are used to bundle, organize, and protect cable and wire runs, as well as simplify installation and maintenance. Constructed of UV stabilized injection molded nylon. Temperature Rating:... More Details
UL Cable Clamp are used to bundle, organize, and protect cable and wire runs, as well as simplify installation and maintenance. Constructed of UV stabilized injection molded nylon. Temperature Rating:... More Details
UL Cable Clamp are used to bundle, organize, and protect cable and wire runs, as well as simplify installation and maintenance. Constructed of UV stabilized injection molded nylon. Temperature Rating:... More Details
UL Cable Clamp are used to bundle, organize, and protect cable and wire runs, as well as simplify installation and maintenance. Constructed of UV stabilized injection molded nylon. Temperature Rating:... More Details
UL Cable Clamp are used to bundle, organize, and protect cable and wire runs, as well as simplify installation and maintenance. Constructed of UV stabilized injection molded nylon. Temperature Rating:... More Details
UL Cable Clamp are used to bundle, organize, and protect cable and wire runs, as well as simplify installation and maintenance. Constructed of UV stabilized injection molded nylon. Temperature Rating:... More Details
Deck Hinges are designed to mount horizontally and attach an eye end secured to tubing in Bimini top applications. Angled Hinges are used for mounting items on slanted surfaces like sloped gunwales. C... More Details
Folding Drink Holder folds to a closed depth of 15/16". Accommodates drink containers up to 2-3/4 in diameter. Impact resistant injection molded ABS construction. Installs with four #6 FH fasteners (n... More Details
Folding Drink Holder folds to a closed depth of 15/16". Accommodates drink containers up to 2-3/4 in diameter. Impact resistant injection molded ABS construction. Installs with four #6 FH fasteners (n... More Details
These Narrow Gunnel Flush Mount Rod Holders are constructed of injection molded ABS. Featuring a 30° angle they are designed for narrow gunnel applications while accommodating rods up to 1-5/8". Insta... More Details
These Narrow Gunnel Flush Mount Rod Holders are constructed of injection molded ABS. Featuring a 30° angle they are designed for narrow gunnel applications while accommodating rods up to 1-5/8". Insta... More Details
This handy multi-tool is made from 304 stainless steel. It includes a knife, needle nose pliers, cutters, scissors, various screw drivers, bottle opener, file and a saw. Canvas carrying case included.... More Details
Molded heavy-duty plastic. Carded.... More Details
Molded heavy-duty plastic. Carded.... More Details
Motor Well Boot organizes and protects engine control cables, wires, or fuel lines. Black accordion-style seal. UV stabilized molded rubber. Includes mounting ring. Installs with six #8 RH fasteners (... More Details
Molded rubber and painted steel.... More Details
These mooring snap hooks are constructed of nickel plated malleable cast steel. Spring-loaded closure for quick and easy connections. With a breaking strength of 1,600 lbs. they are suitable for many ... More Details
This universal Momentary Push Button On-Off Switch can be panel mounted in a 5/8" diameter hole and is wired with two screw terminals. Stamped brass construction to withstand harsh marine conditions. ... More Details
This universal Momentary Push Button On-Off Switch can be panel mounted in a 5/8" diameter hole and is wired with two screw terminals. Stamped brass construction to withstand harsh marine conditions. ... More Details
This momentary Push Button On/Off switch is constructed of corrosion resistant glass reinforced polyester housing with an elastomeric rubber internal gasket and ultrasonic welding for increased water ... More Details
Single Mini Compact Horn features a prewired, sealed sound unit with 304 stainless steel diaphragm and stamped 304 stainless cover. Mounting bracket can be used as a wiring template. A drop-in replace... More Details
Twin Mini Compact Horn features a prewired, sealed sound unit with 304 stainless steel diaphragm and stamped 304 stainless cover. Mounting bracket can be used as a wiring template. A drop-in replaceme... More Details
Kit contains 5ea: 3, 5, 7.5, 10, 15 and 20 amp fuses.... More Details
Three Position Magneto Style Ignition Switch is constructed of polypropylene. For off, ignition, start, and choke functions. 13/16" diameter short shaft for a maximum panel thickness: 5/8". Six screw ... More Details
General purpose incandescent Medium Screw Base Light Bulb features an Edison-style, single contact brass base. Heavy duty glass bulb housing and filament for break resistance and longevity. 15W. 12.8V... More Details
MaxBlast Single Mini Compact Horn is constructed with an injection molded housing under the stamped 304 stainless steel cover, which protects the internal components from corrosion. After a 600 hour s... More Details
Manual Windshield Wiper includes an 8"-12" adjustable wiper arm (410051) and 11" blade (411151). This hand operated wiper is an economical alternative to traditional wiper motors. Chrome plate machine... More Details
These utility snap hooks are constructed of nickel plated malleable cast steel.... More Details
