Shields Hose

1-1/2 R.H. Vac Cuff - 16-147-1120 - 88-1471120F1

Provides added clamping protection for Shields vac hose. For watertight seal apply with sealing compound. SHI 1471120 is heavy-duty.

90° Epdm Rubber Hump Hose - 16-221-8X6 - 88-2218X6F1

100% High temperature EPDM rubber. Maximum operating temperature 250°F (121°C).

90° Epdm Rubber Hump Hose, 6" - 16-221-4X3 - 88-2214X3F1

100% High temperature EPDM rubber. Maximum operating temperature 250°F (121°C).

90° Epdm Rubber Hump Hose, 6" - 16-221-6X5 - 88-2216X5F1

100% High temperature EPDM rubber. Maximum operating temperature 250°F (121°C).

Hardwall Exhaust/Water Hose, 3-1/2" X 12-1/2' - 16-250-3124 - 88-2503124F1

Use for engine intake and wet exhaust connections where bends or long lengths are required. Also good for bilge pump intake/discharge, scupper lines, toilet intake/discharge, and holding tank vent and pump out. Black synthetic rubber tube and cover, reinforced with wire helix imbedded between plies of HD synthetic cord. Resistant to: exhaust fumes, ozone, mild chemicals, antifreeze, salt water, abrasion and odor permeation. Temperature range: -20° F to 200° F continuous, +250° F intermittent. Meets SAE J2006 Type R2.

Hardwall Exhaust/Water Hose, 3-1/8" X 12-1/2' - 16-250-3184 - 88-2503184F1

Use for engine intake and wet exhaust connections where bends or long lengths are required. Also good for bilge pump intake/discharge, scupper lines, toilet intake/discharge, and holding tank vent and pump out. Black synthetic rubber tube and cover, reinforced with wire helix imbedded between plies of HD synthetic cord. Resistant to: exhaust fumes, ozone, mild chemicals, antifreeze, salt water, abrasion and odor permeation. Temperature range: -20° F to 200° F continuous, +250° F intermittent. Meets SAE J2006 Type R2.

Hardwall Exhaust/Water Hose, 5" X 12-1/2' - 16-250-5004 - 88-2505004F1

Use for engine intake and wet exhaust connections where bends or long lengths are required. Also good for bilge pump intake/discharge, scupper lines, toilet intake/discharge, and holding tank vent and pump out. Black synthetic rubber tube and cover, reinforced with wire helix imbedded between plies of HD synthetic cord. Resistant to: exhaust fumes, ozone, mild chemicals, antifreeze, salt water, abrasion and odor permeation. Temperature range: -20° F to 200° F continuous, +250° F intermittent. Meets SAE J2006 Type R2.

Hardwall Exhaust/Water Hose, 6" X 12-1/2' - 16-250-6004 - 88-2506004F1

Use for engine intake and wet exhaust connections where bends or long lengths are required. Also good for bilge pump intake/discharge, scupper lines, toilet intake/discharge, and holding tank vent and pump out. Black synthetic rubber tube and cover, reinforced with wire helix imbedded between plies of HD synthetic cord. Resistant to: exhaust fumes, ozone, mild chemicals, antifreeze, salt water, abrasion and odor permeation. Temperature range: -20° F to 200° F continuous, +250° F intermittent. Meets SAE J2006 Type R2.

Hose Exhaust-Water 10Inx12.5Ft - 16-200-10004 - 88-20010004F1

Sanitation Hose 1 1/2In X 65Ft - 16-105-1120S-1 - 88-10511201F1

Shields 1262000B1 Flexible Rigging Hose, 50' Black - 16-126-2000Bs1 - 88-1262000B1F1

Hides all engine cables and hoses. Can be added to any style outboard. Polyethylene copolymer wall with integral polyethylene helix. Cover for harness, hoses on bracket mounted outboard motors. Resistant to abrasion, crushing and UV.

Shields 1262003B1 Flexible Rigging Hose, 10' Black - 16-126-2003B-1 - 88-1262003B1F1

Hides all engine cables and hoses. Can be added to any style outboard. Polyethylene copolymer wall with integral polyethylene helix. Cover for harness, hoses on bracket mounted outboard motors. Resistant to abrasion, crushing and UV.

Shields 161262000G Flexible Rigging Hose, 50' Grey - 16-126-2000G - 88-161262000Gf1

Hides all engine cables and hoses. Can be added to any style outboard. Polyethylene copolymer wall with integral polyethylene helix. Cover for harness, hoses on bracket mounted outboard motors. Resistant to abrasion, crushing and UV.

Shields 161262000W Flexible Rigging Hose, 50' White - 16-126-2000W - 88-161262000Wf1

Hides all engine cables and hoses. Can be added to any style outboard. Polyethylene copolymer wall with integral polyethylene helix. Cover for harness, hoses on bracket mounted outboard motors. Resistant to abrasion, crushing and UV.

Shields 16375038036D Fuel Feed Line With Fire Sleeve, 3/8" X 3' - 16-375-038036D - 88-16375038036Df1

Stainless Steel Braided PTFE hose is an ideal choice for marine applications. Straight quick connector and fire sleeveExtreme reliability and longer service life-60°C to +260°C Operating Temperature RangesNot affected by heat, aging, Ozone or UV exposureCompatible with a wide range of chemicals and additivesDesigned to dissipate any potential static charges for added safetyCFR 33 USCG and SAE J1527 approvedUltra Low Permeation

Shields 2000344 Marine Exhaust Water Series 200 Hose Without Wire, 3/4" X 12-1/2' - 16-200-0344 - 88-2000344F1

Use for straight connections in wet exhaust systems or engine water circulation lines. Black heavy walled synthetic rubber. Reinforced with 2 or 4 plies of synthetic cord. Resistant to: engine heat, exhaust fumes, ozone, mild chemicals, antifreeze, salt water. Temperature range: -20°F to +200°F continuous +250°F intermittent. Meets SAE J2006 Type R1.

Shields 2000584 Marine Exhaust Water Series 200 Hose Without Wire, 5/8" X 12-1/2' - 16-200-0584 - 88-2000584F1

For straight connections in wet exhaust systems or engine water circulation lines. Black heavy walled synthetic rubber. Reinforced with 2 or 4 plies of synthetic cord. Resistant to: engine heat, exhaust fumes, ozone, mild chemicals, antifreeze, salt water. Temperature range: -20°F to +200°F continuous +250°F intermittent. Meets SAE J2006 Type R1.

Shields 2001004 Marine Exhaust Water Series 200 Hose Without Wire, 1" X 12-1/2' - 16-200-1004 - 88-2001004F1

For straight connections in wet exhaust systems or engine water circulation lines. Black heavy walled synthetic rubber. Reinforced with 2 or 4 plies of synthetic cord. Resistant to: engine heat, exhaust fumes, ozone, mild chemicals, antifreeze, salt water. Temperature range: -20°F to +200°F continuous +250°F intermittent. Meets SAE J2006 Type R1.

Shields 2001124 Marine Exhaust Water Series 200 Hose Without Wire, 1-1/2" X 12-1/2' - 16-200-1124 - 88-2001124F1

For straight connections in wet exhaust systems or engine water circulation lines. Black heavy walled synthetic rubber. Reinforced with 2 or 4 plies of synthetic cord. Resistant to: engine heat, exhaust fumes, ozone, mild chemicals, antifreeze, salt water. Temperature range: -20°F to +200°F continuous +250°F intermittent. Meets SAE J2006 Type R1.

Shields 2001144 Marine Exhaust Water Series 200 Hose Without Wire, 1-1/4" X 12-1/2' - 16-200-1144 - 88-2001144F1

For straight connections in wet exhaust systems or engine water circulation lines. Black heavy walled synthetic rubber. Reinforced with 2 or 4 plies of synthetic cord. Resistant to: engine heat, exhaust fumes, ozone, mild chemicals, antifreeze, salt water. Temperature range: -20°F to +200°F continuous +250°F intermittent. Meets SAE J2006 Type R1.

Shields 2001344 Marine Exhaust Water Series 200 Hose Without Wire, 1-3/4" X 12-1/2' - 16-200-1344 - 88-2001344F1

For straight connections in wet exhaust systems or engine water circulation lines. Black heavy walled synthetic rubber. Reinforced with 2 or 4 plies of synthetic cord. Resistant to: engine heat, exhaust fumes, ozone, mild chemicals, antifreeze, salt water. Temperature range: -20°F to +200°F continuous +250°F intermittent. Meets SAE J2006 Type R1.

Shields 2001584 Marine Exhaust Water Series 200 Hose Without Wire, 1-5/8" X 12-1/2' - 16-200-1584 - 88-2001584F1

For straight connections in wet exhaust systems or engine water circulation lines. Black heavy walled synthetic rubber. Reinforced with 2 or 4 plies of synthetic cord. Resistant to: engine heat, exhaust fumes, ozone, mild chemicals, antifreeze, salt water. Temperature range: -20°F to +200°F continuous +250°F intermittent. Meets SAE J2006 Type R1.

Shields 2001784 Marine Exhaust Water Series 200 Hose Without Wire, 1-7/8" X 12-1/2' - 16-200-1784 - 88-2001784F1

For straight connections in wet exhaust systems or engine water circulation lines. Black heavy walled synthetic rubber. Reinforced with 2 or 4 plies of synthetic cord. Resistant to: engine heat, exhaust fumes, ozone, mild chemicals, antifreeze, salt water. Temperature range: -20°F to +200°F continuous +250°F intermittent. Meets SAE J2006 Type R1.

Shields 2002004 Marine Exhaust Water Series 200 Hose Without Wire, 2" X 12-1/2' - 16-200-2004 - 88-2002004F1

For straight connections in wet exhaust systems or engine water circulation lines. Black heavy walled synthetic rubber. Reinforced with 2 or 4 plies of synthetic cord. Resistant to: engine heat, exhaust fumes, ozone, mild chemicals, antifreeze, salt water. Temperature range: -20°F to +200°F continuous +250°F intermittent. Meets SAE J2006 Type R1.

Shields 200212024 Marine Exhaust Water Series 200 Hose Without Wire, 2-1/2" X 2' - 16-200-2120-24 - 88-200212024F1

For straight connections in wet exhaust systems or engine water circulation lines. Black heavy walled synthetic rubber. Reinforced with 2 or 4 plies of synthetic cord. Resistant to: engine heat, exhaust fumes, ozone, mild chemicals, antifreeze, salt water. Temperature range: -20°F to +200°F continuous +250°F intermittent. Meets SAE J2006 Type R1.

Shields 200212048 Marine Exhaust Water Series 200 Hose Without Wire, 2-1/2" X 4' - 16-200-2120-48 - 88-200212048F1

For straight connections in wet exhaust systems or engine water circulation lines. Black heavy walled synthetic rubber. Reinforced with 2 or 4 plies of synthetic cord. Resistant to: engine heat, exhaust fumes, ozone, mild chemicals, antifreeze, salt water. Temperature range: -20°F to +200°F continuous +250°F intermittent. Meets SAE J2006 Type R1.

Shields 2002124 Marine Exhaust Water Series 200 Hose Without Wire, 2-1/2" X 12-1/2' - 16-200-2124 - 88-2002124F1

For straight connections in wet exhaust systems or engine water circulation lines. Black heavy walled synthetic rubber. Reinforced with 2 or 4 plies of synthetic cord. Resistant to: engine heat, exhaust fumes, ozone, mild chemicals, antifreeze, salt water. Temperature range: -20°F to +200°F continuous +250°F intermittent. Meets SAE J2006 Type R1.

Shields 2002144 Marine Exhaust Water Series 200 Hose Without Wire, 2-1/4" X 12-1/2' - 16-200-2144 - 88-2002144F1

For straight connections in wet exhaust systems or engine water circulation lines. Black heavy walled synthetic rubber. Reinforced with 2 or 4 plies of synthetic cord. Resistant to: engine heat, exhaust fumes, ozone, mild chemicals, antifreeze, salt water. Temperature range: -20°F to +200°F continuous +250°F intermittent. Meets SAE J2006 Type R1.

Shields 2002384 Marine Exhaust Water Series 200 Hose Without Wire, 2-3/8" X 12-1/2' - 16-200-2384 - 88-2002384F1

For straight connections in wet exhaust systems or engine water circulation lines. Black heavy walled synthetic rubber. Reinforced with 2 or 4 plies of synthetic cord. Resistant to: engine heat, exhaust fumes, ozone, mild chemicals, antifreeze, salt water. Temperature range: -20°F to +200°F continuous +250°F intermittent. Meets SAE J2006 Type R1.

Shields 2002784 Marine Exhaust Water Series 200 Hose Without Wire, 2-7/8" X 12-1/2' - 16-200-2784 - 88-2002784F1

For straight connections in wet exhaust systems or engine water circulation lines. Black heavy walled synthetic rubber. Reinforced with 2 or 4 plies of synthetic cord. Resistant to: engine heat, exhaust fumes, ozone, mild chemicals, antifreeze, salt water. Temperature range: -20°F to +200°F continuous +250°F intermittent. Meets SAE J2006 Type R1.

Shields 200300024 Marine Exhaust Water Series 200 Hose Without Wire, 3" X 2' - 16-200-3000-24 - 88-200300024F1

For straight connections in wet exhaust systems or engine water circulation lines. Black heavy walled synthetic rubber. Reinforced with 2 or 4 plies of synthetic cord. Resistant to: engine heat, exhaust fumes, ozone, mild chemicals, antifreeze, salt water. Temperature range: -20°F to +200°F continuous +250°F intermittent. Meets SAE J2006 Type R1.

Shields 2003001 Marine Exhaust Water Series 200 Hose Without Wire, 3" X 6-1/4' - 16-200-3001 - 88-2003001F1

For straight connections in wet exhaust systems or engine water circulation lines. Black heavy walled synthetic rubber. Reinforced with 2 or 4 plies of synthetic cord. Resistant to: engine heat, exhaust fumes, ozone, mild chemicals, antifreeze, salt water. Temperature range: -20°F to +200°F continuous +250°F intermittent. Meets SAE J2006 Type R1.

Shields 2003003 Marine Exhaust Water Series 200 Hose Without Wire, 3" X 10' - 16-200-3003 - 88-2003003F1

For straight connections in wet exhaust systems or engine water circulation lines. Black heavy walled synthetic rubber. Reinforced with 2 or 4 plies of synthetic cord. Resistant to: engine heat, exhaust fumes, ozone, mild chemicals, antifreeze, salt water. Temperature range: -20°F to +200°F continuous +250°F intermittent. Meets SAE J2006 Type R1.

Shields 2003004 Marine Exhaust Water Series 200 Hose Without Wire, 3" X 12-1/2' - 16-200-3004 - 88-2003004F1

For straight connections in wet exhaust systems or engine water circulation lines. Black heavy walled synthetic rubber. Reinforced with 2 or 4 plies of synthetic cord. Resistant to: engine heat, exhaust fumes, ozone, mild chemicals, antifreeze, salt water. Temperature range: -20°F to +200°F continuous +250°F intermittent. Meets SAE J2006 Type R1.

Shields 200312024 Marine Exhaust Water Series 200 Hose Without Wire, 3-1/2" X 2' - 16-200-3120-24 - 88-200312024F1

For straight connections in wet exhaust systems or engine water circulation lines. Black heavy walled synthetic rubber. Reinforced with 2 or 4 plies of synthetic cord. Resistant to: engine heat, exhaust fumes, ozone, mild chemicals, antifreeze, salt water. Temperature range: -20°F to +200°F continuous +250°F intermittent. Meets SAE J2006 Type R1.

Shields 2003121 Marine Exhaust Water Series 200 Hose Without Wire, 3-1/2" X 6-1/4' - 16-200-3121 - 88-2003121F1

For straight connections in wet exhaust systems or engine water circulation lines. Black heavy walled synthetic rubber. Reinforced with 2 or 4 plies of synthetic cord. Resistant to: engine heat, exhaust fumes, ozone, mild chemicals, antifreeze, salt water. Temperature range: -20°F to +200°F continuous +250°F intermittent. Meets SAE J2006 Type R1.

Shields 2003123 Marine Exhaust Water Series 200 Hose Without Wire, 3-1/2" X 104' - 16-200-3123 - 88-2003123F1

For straight connections in wet exhaust systems or engine water circulation lines. Black heavy walled synthetic rubber. Reinforced with 2 or 4 plies of synthetic cord. Resistant to: engine heat, exhaust fumes, ozone, mild chemicals, antifreeze, salt water. Temperature range: -20°F to +200°F continuous +250°F intermittent. Meets SAE J2006 Type R1.

Shields 2003124 Marine Exhaust Water Series 200 Hose Without Wire, 3-1/2" X 12-1/2' - 16-200-3124 - 88-2003124F1

For straight connections in wet exhaust systems or engine water circulation lines. Black heavy walled synthetic rubber. Reinforced with 2 or 4 plies of synthetic cord. Resistant to: engine heat, exhaust fumes, ozone, mild chemicals, antifreeze, salt water. Temperature range: -20°F to +200°F continuous +250°F intermittent. Meets SAE J2006 Type R1.

Shields 2003341 Marine Exhaust Water Series 200 Hose Without Wire, 3-3/4" X 6-1/4' - 16-200-3341 - 88-2003341F1

For straight connections in wet exhaust systems or engine water circulation lines. Black heavy walled synthetic rubber. Reinforced with 2 or 4 plies of synthetic cord. Resistant to: engine heat, exhaust fumes, ozone, mild chemicals, antifreeze, salt water. Temperature range: -20°F to +200°F continuous +250°F intermittent. Meets SAE J2006 Type R1.

Shields 200400024 Marine Exhaust Water Series 200 Hose Without Wire, 4" X 2' - 16-200-4000-24 - 88-200400024F1

For straight connections in wet exhaust systems or engine water circulation lines. Black heavy walled synthetic rubber. Reinforced with 2 or 4 plies of synthetic cord. Resistant to: engine heat, exhaust fumes, ozone, mild chemicals, antifreeze, salt water. Temperature range: -20°F to +200°F continuous +250°F intermittent. Meets SAE J2006 Type R1.

Shields 200400048 Marine Exhaust Water Series 200 Hose Without Wire, 4" X 4/ - 16-200-4000-48 - 88-200400048F1

For straight connections in wet exhaust systems or engine water circulation lines. Black heavy walled synthetic rubber. Reinforced with 2 or 4 plies of synthetic cord. Resistant to: engine heat, exhaust fumes, ozone, mild chemicals, antifreeze, salt water. Temperature range: -20°F to +200°F continuous +250°F intermittent. Meets SAE J2006 Type R1.

Shields 2004001 Marine Exhaust Water Series 200 Hose Without Wire, 4" X 6-1/4' - 16-200-4001 - 88-2004001F1

For straight connections in wet exhaust systems or engine water circulation lines. Black heavy walled synthetic rubber. Reinforced with 2 or 4 plies of synthetic cord. Resistant to: engine heat, exhaust fumes, ozone, mild chemicals, antifreeze, salt water. Temperature range: -20°F to +200°F continuous +250°F intermittent. Meets SAE J2006 Type R1.

Shields 2004003 Marine Exhaust Water Series 200 Hose Without Wire, 4" X 10' - 16-200-4003 - 88-2004003F1

For straight connections in wet exhaust systems or engine water circulation lines. Black heavy walled synthetic rubber. Reinforced with 2 or 4 plies of synthetic cord. Resistant to: engine heat, exhaust fumes, ozone, mild chemicals, antifreeze, salt water. Temperature range: -20°F to +200°F continuous +250°F intermittent. Meets SAE J2006 Type R1.

Shields 2004004 Marine Exhaust Water Series 200 Hose Without Wire, 4" X 12 1/2' - 16-200-4004 - 88-2004004F1

For straight connections in wet exhaust systems or engine water circulation lines. Black heavy walled synthetic rubber. Reinforced with 2 or 4 plies of synthetic cord. Resistant to: engine heat, exhaust fumes, ozone, mild chemicals, antifreeze, salt water. Temperature range: -20°F to +200°F continuous +250°F intermittent. Meets SAE J2006 Type R1.

Shields 2004124 Marine Exhaust Water Series 200 Hose Without Wire, 4-1/2" X 12-1/2' - 16-200-4124 - 88-2004124F1

For straight connections in wet exhaust systems or engine water circulation lines. Black heavy walled synthetic rubber. Reinforced with 2 or 4 plies of synthetic cord. Resistant to: engine heat, exhaust fumes, ozone, mild chemicals, antifreeze, salt water. Temperature range: -20°F to +200°F continuous +250°F intermittent. Meets SAE J2006 Type R1.

Shields 200500048 Marine Exhaust Water Series 200 Hose Without Wire, 5" X 4' - 16-200-5000-48 - 88-200500048F1

For straight connections in wet exhaust systems or engine water circulation lines. Black heavy walled synthetic rubber. Reinforced with 2 or 4 plies of synthetic cord. Resistant to: engine heat, exhaust fumes, ozone, mild chemicals, antifreeze, salt water. Temperature range: -20°F to +200°F continuous +250°F intermittent. Meets SAE J2006 Type R1.

Shields 2005004 Marine Exhaust Water Series 200 Hose Without Wire, 5" X 12-1/2' - 16-200-5004 - 88-2005004F1

For straight connections in wet exhaust systems or engine water circulation lines. Black heavy walled synthetic rubber. Reinforced with 2 or 4 plies of synthetic cord. Resistant to: engine heat, exhaust fumes, ozone, mild chemicals, antifreeze, salt water. Temperature range: -20°F to +200°F continuous +250°F intermittent. Meets SAE J2006 Type R1.

Shields 200600024 Marine Exhaust Water Series 200 Hose Without Wire, 6" X 2' - 16-200-6000-24 - 88-200600024F1

For straight connections in wet exhaust systems or engine water circulation lines. Black heavy walled synthetic rubber. Reinforced with 2 or 4 plies of synthetic cord. Resistant to: engine heat, exhaust fumes, ozone, mild chemicals, antifreeze, salt water. Temperature range: -20°F to +200°F continuous +250°F intermittent. Meets SAE J2006 Type R1.

Shields 200600048 Marine Exhaust Water Series 200 Hose Without Wire, 6" X 4' - 16-200-6000-48 - 88-200600048F1

For straight connections in wet exhaust systems or engine water circulation lines. Black heavy walled synthetic rubber. Reinforced with 2 or 4 plies of synthetic cord. Resistant to: engine heat, exhaust fumes, ozone, mild chemicals, antifreeze, salt water. Temperature range: -20°F to +200°F continuous +250°F intermittent. Meets SAE J2006 Type R1.

Shields 2006004 Marine Exhaust Water Series 200 Hose Without Wire, 6" X 12-1/2'' - 16-200-6004 - 88-2006004F1

For straight connections in wet exhaust systems or engine water circulation lines. Black heavy walled synthetic rubber. Reinforced with 2 or 4 plies of synthetic cord. Resistant to: engine heat, exhaust fumes, ozone, mild chemicals, antifreeze, salt water. Temperature range: -20°F to +200°F continuous +250°F intermittent. Meets SAE J2006 Type R1.

Shields 2008004 Marine Exhaust Water Series 200 Hose Without Wire, 8" X 12-1/2'' - 16-200-8004 - 88-2008004F1

For straight connections in wet exhaust systems or engine water circulation lines. Black heavy walled synthetic rubber. Reinforced with 2 or 4 plies of synthetic cord. Resistant to: engine heat, exhaust fumes, ozone, mild chemicals, antifreeze, salt water. Temperature range: -20°F to +200°F continuous +250°F intermittent. Meets SAE J2006 Type R1.

Shields 2540344 Exoflex Water/Exhaust Hose, 3/4" X 12-1/2' - 16-254-0344 - 88-2540344F1

Suitable for delivery of cooling water and exhaust gas. SAE J2006 R2 LLOYD Registered Type ApprovedTemperature Range: -22°F to 212°F, Peak 239°FBlack synthetic rubber tube cover makes it resistant to heat, salt water, ozone, and abrasionReinforced with synthetic plies, steel wire helices make it strong and kink resistantVery flexible with a 1.5" x ID radiusTighter corrugations to optimize the perfect clamp location

Shields 2541001 Exoflex Water/Exhaust Hose, 1" X 6-1/4' - 16-254-1001 - 88-2541001F1

Suitable for delivery of cooling water and exhaust gas. SAE J2006 R2 LLOYD Registered Type ApprovedTemperature Range: -22°F to 212°F, Peak 239°FBlack synthetic rubber tube cover makes it resistant to heat, salt water, ozone, and abrasionReinforced with synthetic plies, steel wire helices make it strong and kink resistantVery flexible with a 1.5" x ID radiusTighter corrugations to optimize the perfect clamp location

Shields 2541004 Exoflex Water/Exhaust Hose, 1" X 12-1/2' - 16-254-1004 - 88-2541004F1

Suitable for delivery of cooling water and exhaust gas. SAE J2006 R2 LLOYD Registered Type ApprovedTemperature Range: -22°F to 212°F, Peak 239°FBlack synthetic rubber tube cover makes it resistant to heat, salt water, ozone, and abrasionReinforced with synthetic plies, steel wire helices make it strong and kink resistantVery flexible with a 1.5" x ID radiusTighter corrugations to optimize the perfect clamp location

Shields 2541120 Exoflex Water/Exhaust Hose, 1-1/2" X 50' - 16-254-1120S - 88-2541120F1

Suitable for delivery of cooling water and exhaust gas. SAE J2006 R2 LLOYD Registered Type ApprovedTemperature Range: -22°F to 212°F, Peak 239°FBlack synthetic rubber tube cover makes it resistant to heat, salt water, ozone, and abrasionReinforced with synthetic plies, steel wire helices make it strong and kink resistantVery flexible with a 1.5" x ID radiusTighter corrugations to optimize the perfect clamp location

Shields 2541124 Exoflex Water/Exhaust Hose, 1-1/2" X 12-1/2' - 16-254-1124 - 88-2541124F1

Suitable for delivery of cooling water and exhaust gas. SAE J2006 R2 LLOYD Registered Type ApprovedTemperature Range: -22°F to 212°F, Peak 239°FBlack synthetic rubber tube cover makes it resistant to heat, salt water, ozone, and abrasionReinforced with synthetic plies, steel wire helices make it strong and kink resistantVery flexible with a 1.5" x ID radiusTighter corrugations to optimize the perfect clamp location

Shields 2541140 Exoflex Water/Exhaust Hose, 1-1/4" X 50' - 16-254-1140S - 88-2541140F1

Suitable for delivery of cooling water and exhaust gas. SAE J2006 R2 LLOYD Registered Type ApprovedTemperature Range: -22°F to 212°F, Peak 239°FBlack synthetic rubber tube cover makes it resistant to heat, salt water, ozone, and abrasionReinforced with synthetic plies, steel wire helices make it strong and kink resistantVery flexible with a 1.5" x ID radiusTighter corrugations to optimize the perfect clamp location

Shields 2541144 Exoflex Water/Exhaust Hose, 1-1/4" X 12-1/2' - 16-254-1144 - 88-2541144F1

Suitable for delivery of cooling water and exhaust gas. SAE J2006 R2 LLOYD Registered Type ApprovedTemperature Range: -22°F to 212°F, Peak 239°FBlack synthetic rubber tube cover makes it resistant to heat, salt water, ozone, and abrasionReinforced with synthetic plies, steel wire helices make it strong and kink resistantVery flexible with a 1.5" x ID radiusTighter corrugations to optimize the perfect clamp location

Shields 2541344 Exoflex Water/Exhaust Hose, 1-3/4" X 12-1/2' - 16-254-1344 - 88-2541344F1

Suitable for delivery of cooling water and exhaust gas. SAE J2006 R2 LLOYD Registered Type ApprovedTemperature Range: -22°F to 212°F, Peak 239°FBlack synthetic rubber tube cover makes it resistant to heat, salt water, ozone, and abrasionReinforced with synthetic plies, steel wire helices make it strong and kink resistantVery flexible with a 1.5" x ID radiusTighter corrugations to optimize the perfect clamp location

Shields 2541584 Exoflex Water/Exhaust Hose, 1-5/8" X 12-1/2' - 16-254-1584 - 88-2541584F1

Suitable for delivery of cooling water and exhaust gas. SAE J2006 R2 LLOYD Registered Type ApprovedTemperature Range: -22°F to 212°F, Peak 239°FBlack synthetic rubber tube cover makes it resistant to heat, salt water, ozone, and abrasionReinforced with synthetic plies, steel wire helices make it strong and kink resistantVery flexible with a 1.5" x ID radiusTighter corrugations to optimize the perfect clamp location

Shields 2542000 Exoflex Water/Exhaust Hose, 2 X 50' - 16-254-2000S - 88-2542000F1

Suitable for delivery of cooling water and exhaust gas.SAE J2006 R2 LLOYD Registered Type ApprovedTemperature Range: -22°F to 212°F, Peak 239°FBlack synthetic rubber tube cover makes it resistant to heat, salt water, ozone, and abrasionReinforced with synthetic plies, steel wire helices make it strong and kink resistantVery flexible with a 1.5" x ID" radiusTighter corrugations to optimize the perfect clamp location

Shields 2542004 Exoflex Water/Exhaust Hose, 2" X 12-1/2' - 16-254-2004 - 88-2542004F1

Suitable for delivery of cooling water and exhaust gas. SAE J2006 R2 LLOYD Registered Type ApprovedTemperature Range: -22°F to 212°F, Peak 239°FBlack synthetic rubber tube cover makes it resistant to heat, salt water, ozone, and abrasionReinforced with synthetic plies, steel wire helices make it strong and kink resistantVery flexible with a 1.5" x ID radiusTighter corrugations to optimize the perfect clamp location

Shields 2542120 Exoflex Water/Exhaust Hose, 2-1/2 X 50' - 16-254-2120S - 88-2542120F1

Suitable for delivery of cooling water and exhaust gas.SAE J2006 R2 LLOYD Registered Type ApprovedTemperature Range: -22°F to 212°F, Peak 239°FBlack synthetic rubber tube cover makes it resistant to heat, salt water, ozone, and abrasionReinforced with synthetic plies, steel wire helices make it strong and kink resistantVery flexible with a 1.5" x ID" radiusTighter corrugations to optimize the perfect clamp location

Shields 2542121 Exoflex Water/Exhaust Hose, 2-1/2" X 6-1/4' - 16-254-2121 - 88-2542121F1

Suitable for delivery of cooling water and exhaust gas. SAE J2006 R2 LLOYD Registered Type ApprovedTemperature Range: -22°F to 212°F, Peak 239°FBlack synthetic rubber tube cover makes it resistant to heat, salt water, ozone, and abrasionReinforced with synthetic plies, steel wire helices make it strong and kink resistantVery flexible with a 1.5" x ID radiusTighter corrugations to optimize the perfect clamp location

Shields 2542124 Exoflex Water/Exhaust Hose, 2-1/2" X 12-1/2' - 16-254-2124 - 88-2542124F1

Suitable for delivery of cooling water and exhaust gas. SAE J2006 R2 LLOYD Registered Type ApprovedTemperature Range: -22°F to 212°F, Peak 239°FBlack synthetic rubber tube cover makes it resistant to heat, salt water, ozone, and abrasionReinforced with synthetic plies, steel wire helices make it strong and kink resistantVery flexible with a 1.5" x ID radiusTighter corrugations to optimize the perfect clamp location

Shields 2542140 Exoflex Water/Exhaust Hose, 2-1/4 X 50' - 16-254-2140S - 88-2542140F1

Suitable for delivery of cooling water and exhaust gas.SAE J2006 R2 LLOYD Registered Type ApprovedTemperature Range: -22°F to 212°F, Peak 239°FBlack synthetic rubber tube cover makes it resistant to heat, salt water, ozone, and abrasionReinforced with synthetic plies, steel wire helices make it strong and kink resistantVery flexible with a 1.5" x ID" radiusTighter corrugations to optimize the perfect clamp location

Shields 2542141 Exoflex Water/Exhaust Hose, 2-1/4" X 6-1/4' - 16-254-2141 - 88-2542141F1

Suitable for delivery of cooling water and exhaust gas. SAE J2006 R2 LLOYD Registered Type ApprovedTemperature Range: -22°F to 212°F, Peak 239°FBlack synthetic rubber tube cover makes it resistant to heat, salt water, ozone, and abrasionReinforced with synthetic plies, steel wire helices make it strong and kink resistantVery flexible with a 1.5" x ID radiusTighter corrugations to optimize the perfect clamp location

Shields 2542144 Exoflex Water/Exhaust Hose, 2-1/4" X 12-1/2' - 16-254-2144 - 88-2542144F1

Suitable for delivery of cooling water and exhaust gas. SAE J2006 R2 LLOYD Registered Type ApprovedTemperature Range: -22°F to 212°F, Peak 239°FBlack synthetic rubber tube cover makes it resistant to heat, salt water, ozone, and abrasionReinforced with synthetic plies, steel wire helices make it strong and kink resistantVery flexible with a 1.5" x ID radiusTighter corrugations to optimize the perfect clamp location

Shields 2542384 Exoflex Water/Exhaust Hose, 3-3/8" X 12-1/2' - 16-254-2384 - 88-2542384F1

Suitable for delivery of cooling water and exhaust gas. SAE J2006 R2 LLOYD Registered Type ApprovedTemperature Range: -22°F to 212°F, Peak 239°FBlack synthetic rubber tube cover makes it resistant to heat, salt water, ozone, and abrasionReinforced with synthetic plies, steel wire helices make it strong and kink resistantVery flexible with a 1.5" x ID radiusTighter corrugations to optimize the perfect clamp location

Shields 2543000 Exoflex Water/Exhaust Hose, 3 X 50' - 16-254-3000S - 88-2543000F1

Suitable for delivery of cooling water and exhaust gas.SAE J2006 R2 LLOYD Registered Type ApprovedTemperature Range: -22°F to 212°F, Peak 239°FBlack synthetic rubber tube cover makes it resistant to heat, salt water, ozone, and abrasionReinforced with synthetic plies, steel wire helices make it strong and kink resistantVery flexible with a 1.5" x ID" radiusTighter corrugations to optimize the perfect clamp location

Shields 2543001 Exoflex Water/Exhaust Hose, 3" X 6-1/4' - 16-254-3001 - 88-2543001F1

Suitable for delivery of cooling water and exhaust gas. SAE J2006 R2 LLOYD Registered Type ApprovedTemperature Range: -22°F to 212°F, Peak 239°FBlack synthetic rubber tube cover makes it resistant to heat, salt water, ozone, and abrasionReinforced with synthetic plies, steel wire helices make it strong and kink resistantVery flexible with a 1.5" x ID radiusTighter corrugations to optimize the perfect clamp location

Shields 2543004 Exoflex Water/Exhaust Hose, 3" X 12-1/2' - 16-254-3004 - 88-2543004F1

Suitable for delivery of cooling water and exhaust gas. SAE J2006 R2 LLOYD Registered Type ApprovedTemperature Range: -22°F to 212°F, Peak 239°FBlack synthetic rubber tube cover makes it resistant to heat, salt water, ozone, and abrasionReinforced with synthetic plies, steel wire helices make it strong and kink resistantVery flexible with a 1.5" x ID radiusTighter corrugations to optimize the perfect clamp location

Shields 2543121 Exoflex Water/Exhaust Hose, 3-1/2" X 6-1/4' - 16-254-3121 - 88-2543121F1

Suitable for delivery of cooling water and exhaust gas. SAE J2006 R2 LLOYD Registered Type ApprovedTemperature Range: -22°F to 212°F, Peak 239°FBlack synthetic rubber tube cover makes it resistant to heat, salt water, ozone, and abrasionReinforced with synthetic plies, steel wire helices make it strong and kink resistantVery flexible with a 1.5" x ID radiusTighter corrugations to optimize the perfect clamp location

Shields 2543124 Exoflex Water/Exhaust Hose, 3-1/2" X 12-1/2' - 16-254-3124 - 88-2543124F1

Suitable for delivery of cooling water and exhaust gas. SAE J2006 R2 LLOYD Registered Type ApprovedTemperature Range: -22°F to 212°F, Peak 239°FBlack synthetic rubber tube cover makes it resistant to heat, salt water, ozone, and abrasionReinforced with synthetic plies, steel wire helices make it strong and kink resistantVery flexible with a 1.5" x ID radiusTighter corrugations to optimize the perfect clamp location

Shields 2544001 Exoflex Water/Exhaust Hose, 4" X 6-1/4' - 16-254-4001 - 88-2544001F1

Suitable for delivery of cooling water and exhaust gas. SAE J2006 R2 LLOYD Registered Type ApprovedTemperature Range: -22°F to 212°F, Peak 239°FBlack synthetic rubber tube cover makes it resistant to heat, salt water, ozone, and abrasionReinforced with synthetic plies, steel wire helices make it strong and kink resistantVery flexible with a 1.5" x ID radiusTighter corrugations to optimize the perfect clamp location

Shields 2544004 Exoflex Water/Exhaust Hose, 4" X 12-1/2' - 16-254-4004 - 88-2544004F1

Suitable for delivery of cooling water and exhaust gas. SAE J2006 R2 LLOYD Registered Type ApprovedTemperature Range: -22°F to 212°F, Peak 239°FBlack synthetic rubber tube cover makes it resistant to heat, salt water, ozone, and abrasionReinforced with synthetic plies, steel wire helices make it strong and kink resistantVery flexible with a 1.5" x ID radiusTighter corrugations to optimize the perfect clamp location

Shields 2544121 Exoflex Water/Exhaust Hose, 4-1/2" X 6-1/4' - 16-254-4121 - 88-2544121F1

Suitable for delivery of cooling water and exhaust gas. SAE J2006 R2 LLOYD Registered Type ApprovedTemperature Range: -22°F to 212°F, Peak 239°FBlack synthetic rubber tube cover makes it resistant to heat, salt water, ozone, and abrasionReinforced with synthetic plies, steel wire helices make it strong and kink resistantVery flexible with a 1.5" x ID radiusTighter corrugations to optimize the perfect clamp location

Shields 2544124 Exoflex Water/Exhaust Hose, 4-1/2" X 12-1/2' - 16-254-4124 - 88-2544124F1

Suitable for delivery of cooling water and exhaust gas. SAE J2006 R2 LLOYD Registered Type ApprovedTemperature Range: -22°F to 212°F, Peak 239°FBlack synthetic rubber tube cover makes it resistant to heat, salt water, ozone, and abrasionReinforced with synthetic plies, steel wire helices make it strong and kink resistantVery flexible with a 1.5" x ID radiusTighter corrugations to optimize the perfect clamp location

Shields 2545001 Exoflex Water/Exhaust Hose, 5" X 6-1/4' - 16-254-5001 - 88-2545001F1

Suitable for delivery of cooling water and exhaust gas. SAE J2006 R2 LLOYD Registered Type ApprovedTemperature Range: -22°F to 212°F, Peak 239°FBlack synthetic rubber tube cover makes it resistant to heat, salt water, ozone, and abrasionReinforced with synthetic plies, steel wire helices make it strong and kink resistantVery flexible with a 1.5" x ID radiusTighter corrugations to optimize the perfect clamp location

Shields 2545004 Exoflex Water/Exhaust Hose, 5" X 12-1/2' - 16-254-5004 - 88-2545004F1

Suitable for delivery of cooling water and exhaust gas. SAE J2006 R2 LLOYD Registered Type ApprovedTemperature Range: -22°F to 212°F, Peak 239°FBlack synthetic rubber tube cover makes it resistant to heat, salt water, ozone, and abrasionReinforced with synthetic plies, steel wire helices make it strong and kink resistantVery flexible with a 1.5" x ID radiusTighter corrugations to optimize the perfect clamp location

Shields 2546004 Exoflex Water/Exhaust Hose, 6" X 12-1/2' - 16-254-6004 - 88-2546004F1

Suitable for delivery of cooling water and exhaust gas. SAE J2006 R2 LLOYD Registered Type ApprovedTemperature Range: -22°F to 212°F, Peak 239°FBlack synthetic rubber tube cover makes it resistant to heat, salt water, ozone, and abrasionReinforced with synthetic plies, steel wire helices make it strong and kink resistantVery flexible with a 1.5" x ID radiusTighter corrugations to optimize the perfect clamp location

Shields 2548001 Exoflex Water/Exhaust Hose, 8" X 6-1/4' - 16-254-8001 - 88-2548001F1

Suitable for delivery of cooling water and exhaust gas. SAE J2006 R2 LLOYD Registered Type ApprovedTemperature Range: -22°F to 212°F, Peak 239°FBlack synthetic rubber tube cover makes it resistant to heat, salt water, ozone, and abrasionReinforced with synthetic plies, steel wire helices make it strong and kink resistantVery flexible with a 1.5" x ID radiusTighter corrugations to optimize the perfect clamp location

Shields 2548004 Exoflex Water/Exhaust Hose, 8" X 12-1/2' - 16-254-8004 - 88-2548004F1

Suitable for delivery of cooling water and exhaust gas. SAE J2006 R2 LLOYD Registered Type ApprovedTemperature Range: -22°F to 212°F, Peak 239°FBlack synthetic rubber tube cover makes it resistant to heat, salt water, ozone, and abrasionReinforced with synthetic plies, steel wire helices make it strong and kink resistantVery flexible with a 1.5" x ID radiusTighter corrugations to optimize the perfect clamp location

Shields 3370143 Silverado 4000 Type B1-15 Outboard Fuel Line, 1/4" X 10' - 16-337-0143 - 88-3370143F1

Silverado 4000 Outboard Fuel Line is resistant to ethanol blended fuels. This hose is EPA and CARB compliant. THV barrier layer to prevent permeation,polyester reinforcement for strength and a weather and UV resistant CPE cover. The gray color keeps hose cooler and helps prevent vapor lock. This hose is for above deck primer bulb applications, and is not fire retardant. Meets SAE J1527 Type B1-15.WARNING - Special care should be taken when coupling Shields series 331, 337 and 368 EPA approved barrier fuel hoses. Always use a lubricant when inserting a fitting. Oil based or other lubricants designed for rubber or plastic assembly should be used. Silicone is not recommended as it may cause coupling retention issues. Over-sized fittings should not be used. The fitting should slide into the hose with minimum, but some, resistance. Using fittings with oversized barbs may result in damage to the barrier layer. Sierra recommends the use of Oetiker stepless ear clamps or worm drive clamps to attach the fuel hose. Do not use wire ties or spring tension clamps. Over-tightening a worm drive clamp may result in damage to the inner layer and cause fuel to get in between the layers. This will cause the layers to separate and block the flow of fuel.

Shields 3370146 Silverado 4000 Type B1-15 Outboard Fuel Line, 1/4" X 50' - 16-337-0146 - 88-3370146F1

Silverado 4000 Outboard Fuel Line is resistant to ethanol blended fuels. This hose is EPA and CARB compliant. THV barrier layer to prevent permeation,polyester reinforcement for strength and a weather and UV resistant CPE cover. The gray color keeps hose cooler and helps prevent vapor lock. This hose is for above deck primer bulb applications, and is not fire retardant. Meets SAE J1527 Type B1-15.WARNING - Special care should be taken when coupling Shields series 331, 337 and 368 EPA approved barrier fuel hoses. Always use a lubricant when inserting a fitting. Oil based or other lubricants designed for rubber or plastic assembly should be used. Silicone is not recommended as it may cause coupling retention issues. Over-sized fittings should not be used. The fitting should slide into the hose with minimum, but some, resistance. Using fittings with oversized barbs may result in damage to the barrier layer. Sierra recommends the use of Oetiker stepless ear clamps or worm drive clamps to attach the fuel hose. Do not use wire ties or spring tension clamps. Over-tightening a worm drive clamp may result in damage to the inner layer and cause fuel to get in between the layers. This will cause the layers to separate and block the flow of fuel.

Shields 3370380 Silverado 4000 Type B1-15 Outboard Fuel Line, 3/8" X 250' - 16-337-0380S - 88-3370380F1

Silverado 4000 Outboard Fuel Line is resistant to ethanol blended fuels. This hose is EPA and CARB compliant. THV barrier layer to prevent permeation,polyester reinforcement for strength and a weather and UV resistant CPE cover. The gray color keeps hose cooler and helps prevent vapor lock. This hose is for above deck primer bulb applications, and is not fire retardant. Meets SAE J1527 Type B1-15.WARNING - Special care should be taken when coupling Shields series 331, 337 and 368 EPA approved barrier fuel hoses. Always use a lubricant when inserting a fitting. Oil based or other lubricants designed for rubber or plastic assembly should be used. Silicone is not recommended as it may cause coupling retention issues. Over-sized fittings should not be used. The fitting should slide into the hose with minimum, but some, resistance. Using fittings with oversized barbs may result in damage to the barrier layer. Sierra recommends the use of Oetiker stepless ear clamps or worm drive clamps to attach the fuel hose. Do not use wire ties or spring tension clamps. Over-tightening a worm drive clamp may result in damage to the inner layer and cause fuel to get in between the layers. This will cause the layers to separate and block the flow of fuel.

Shields 3370383 Silverado 4000 Type B1-15 Outboard Fuel Line, 3/8" X 10' - 16-337-0383 - 88-3370383F1

Silverado 4000 Outboard Fuel Line is resistant to ethanol blended fuels. This hose is EPA and CARB compliant. THV barrier layer to prevent permeation,polyester reinforcement for strength and a weather and UV resistant CPE cover. The gray color keeps hose cooler and helps prevent vapor lock. This hose is for above deck primer bulb applications, and is not fire retardant. Meets SAE J1527 Type B1-15.WARNING - Special care should be taken when coupling Shields series 331, 337 and 368 EPA approved barrier fuel hoses. Always use a lubricant when inserting a fitting. Oil based or other lubricants designed for rubber or plastic assembly should be used. Silicone is not recommended as it may cause coupling retention issues. Over-sized fittings should not be used. The fitting should slide into the hose with minimum, but some, resistance. Using fittings with oversized barbs may result in damage to the barrier layer. Sierra recommends the use of Oetiker stepless ear clamps or worm drive clamps to attach the fuel hose. Do not use wire ties or spring tension clamps. Over-tightening a worm drive clamp may result in damage to the inner layer and cause fuel to get in between the layers. This will cause the layers to separate and block the flow of fuel.

Shields 3370385 Silverado 4000 Type B1-15 Outboard Fuel Line, 3/8" X 25' - 16-337-0385 - 88-3370385F1

Silverado 4000 Outboard Fuel Line is resistant to ethanol blended fuels. This hose is EPA and CARB compliant. THV barrier layer to prevent permeation,polyester reinforcement for strength and a weather and UV resistant CPE cover. The gray color keeps hose cooler and helps prevent vapor lock. This hose is for above deck primer bulb applications, and is not fire retardant. Meets SAE J1527 Type B1-15.WARNING - Special care should be taken when coupling Shields series 331, 337 and 368 EPA approved barrier fuel hoses. Always use a lubricant when inserting a fitting. Oil based or other lubricants designed for rubber or plastic assembly should be used. Silicone is not recommended as it may cause coupling retention issues. Over-sized fittings should not be used. The fitting should slide into the hose with minimum, but some, resistance. Using fittings with oversized barbs may result in damage to the barrier layer. Sierra recommends the use of Oetiker stepless ear clamps or worm drive clamps to attach the fuel hose. Do not use wire ties or spring tension clamps. Over-tightening a worm drive clamp may result in damage to the inner layer and cause fuel to get in between the layers. This will cause the layers to separate and block the flow of fuel.

Shields 3370386 Silverado 4000 Type B1-15 Outboard Fuel Line, 3/8" X 50' - 16-337-0386 - 88-3370386F1

Silverado 4000 Outboard Fuel Line is resistant to ethanol blended fuels. This hose is EPA and CARB compliant. THV barrier layer to prevent permeation,polyester reinforcement for strength and a weather and UV resistant CPE cover. The gray color keeps hose cooler and helps prevent vapor lock. This hose is for above deck primer bulb applications, and is not fire retardant. Meets SAE J1527 Type B1-15.WARNING - Special care should be taken when coupling Shields series 331, 337 and 368 EPA approved barrier fuel hoses. Always use a lubricant when inserting a fitting. Oil based or other lubricants designed for rubber or plastic assembly should be used. Silicone is not recommended as it may cause coupling retention issues. Over-sized fittings should not be used. The fitting should slide into the hose with minimum, but some, resistance. Using fittings with oversized barbs may result in damage to the barrier layer. Sierra recommends the use of Oetiker stepless ear clamps or worm drive clamps to attach the fuel hose. Do not use wire ties or spring tension clamps. Over-tightening a worm drive clamp may result in damage to the inner layer and cause fuel to get in between the layers. This will cause the layers to separate and block the flow of fuel.

Shields 3370560 Silverado 4000 Type B1-15 Outboard Fuel Line, 5/16" X 250' - 16-337-0560S - 88-3370560F1

Silverado 4000 Outboard Fuel Line is resistant to ethanol blended fuels. This hose is EPA and CARB compliant. THV barrier layer to prevent permeation,polyester reinforcement for strength and a weather and UV resistant CPE cover. The gray color keeps hose cooler and helps prevent vapor lock. This hose is for above deck primer bulb applications, and is not fire retardant. Meets SAE J1527 Type B1-15.WARNING - Special care should be taken when coupling Shields series 331, 337 and 368 EPA approved barrier fuel hoses. Always use a lubricant when inserting a fitting. Oil based or other lubricants designed for rubber or plastic assembly should be used. Silicone is not recommended as it may cause coupling retention issues. Over-sized fittings should not be used. The fitting should slide into the hose with minimum, but some, resistance. Using fittings with oversized barbs may result in damage to the barrier layer. Sierra recommends the use of Oetiker stepless ear clamps or worm drive clamps to attach the fuel hose. Do not use wire ties or spring tension clamps. Over-tightening a worm drive clamp may result in damage to the inner layer and cause fuel to get in between the layers. This will cause the layers to separate and block the flow of fuel.

Shields 3370563 Silverado 4000 Type B1-15 Outboard Fuel Line, 5/16" X 10' - 16-337-0563 - 88-3370563F1

Silverado 4000 Outboard Fuel Line is resistant to ethanol blended fuels. This hose is EPA and CARB compliant. THV barrier layer to prevent permeation,polyester reinforcement for strength and a weather and UV resistant CPE cover. The gray color keeps hose cooler and helps prevent vapor lock. This hose is for above deck primer bulb applications, and is not fire retardant. Meets SAE J1527 Type B1-15.WARNING - Special care should be taken when coupling Shields series 331, 337 and 368 EPA approved barrier fuel hoses. Always use a lubricant when inserting a fitting. Oil based or other lubricants designed for rubber or plastic assembly should be used. Silicone is not recommended as it may cause coupling retention issues. Over-sized fittings should not be used. The fitting should slide into the hose with minimum, but some, resistance. Using fittings with oversized barbs may result in damage to the barrier layer. Sierra recommends the use of Oetiker stepless ear clamps or worm drive clamps to attach the fuel hose. Do not use wire ties or spring tension clamps. Over-tightening a worm drive clamp may result in damage to the inner layer and cause fuel to get in between the layers. This will cause the layers to separate and block the flow of fuel.

Shields 3370565 Silverado 4000 Type B1-15 Outboard Fuel Line, 5/16" X 25' - 16-337-0565 - 88-3370565F1

Silverado 4000 Outboard Fuel Line is resistant to ethanol blended fuels. This hose is EPA and CARB compliant. THV barrier layer to prevent permeation,polyester reinforcement for strength and a weather and UV resistant CPE cover. The gray color keeps hose cooler and helps prevent vapor lock. This hose is for above deck primer bulb applications, and is not fire retardant. Meets SAE J1527 Type B1-15.WARNING - Special care should be taken when coupling Shields series 331, 337 and 368 EPA approved barrier fuel hoses. Always use a lubricant when inserting a fitting. Oil based or other lubricants designed for rubber or plastic assembly should be used. Silicone is not recommended as it may cause coupling retention issues. Over-sized fittings should not be used. The fitting should slide into the hose with minimum, but some, resistance. Using fittings with oversized barbs may result in damage to the barrier layer. Sierra recommends the use of Oetiker stepless ear clamps or worm drive clamps to attach the fuel hose. Do not use wire ties or spring tension clamps. Over-tightening a worm drive clamp may result in damage to the inner layer and cause fuel to get in between the layers. This will cause the layers to separate and block the flow of fuel.

Shields 3370566 Silverado 4000 Type B1-15 Outboard Fuel Line, 5/16" X 50' - 16-337-0566 - 88-3370566F1

Silverado 4000 Outboard Fuel Line is resistant to ethanol blended fuels. This hose is EPA and CARB compliant. THV barrier layer to prevent permeation,polyester reinforcement for strength and a weather and UV resistant CPE cover. The gray color keeps hose cooler and helps prevent vapor lock. This hose is for above deck primer bulb applications, and is not fire retardant. Meets SAE J1527 Type B1-15.WARNING - Special care should be taken when coupling Shields series 331, 337 and 368 EPA approved barrier fuel hoses. Always use a lubricant when inserting a fitting. Oil based or other lubricants designed for rubber or plastic assembly should be used. Silicone is not recommended as it may cause coupling retention issues. Over-sized fittings should not be used. The fitting should slide into the hose with minimum, but some, resistance. Using fittings with oversized barbs may result in damage to the barrier layer. Sierra recommends the use of Oetiker stepless ear clamps or worm drive clamps to attach the fuel hose. Do not use wire ties or spring tension clamps. Over-tightening a worm drive clamp may result in damage to the inner layer and cause fuel to get in between the layers. This will cause the layers to separate and block the flow of fuel.

Shields 72010000 Marine Exhaust Hose T-Bolt 3/4" Band Clamp - 18-720-10000 - 88-72010000F1

Corrosion resistant 316 stainless steel for exhaust or intake - Any below water line application. Works with corrugated hose. Full 360° clamping surface. 3/4" band, extra long 1/4" bolt & nylon insert locknut. Torque to 75 in. lbs. maximum.For Silicone exhaust hose, use "S" series T-Bolt Clamps to accomodate the thinner wall on those hoses.

Shields 7202000 Marine Exhaust Hose T-Bolt 3/4" Band Clamp - 18-720-2000 - 88-7202000F1

Corrosion resistant 316 stainless steel for exhaust or intake - Any below water line application. Works with corrugated hose. Full 360° clamping surface. 3/4" band, extra long 1/4" bolt & nylon insert locknut. Torque to 75 in. lbs. maximum.For Silicone exhaust hose, use "S" series T-Bolt Clamps to accomodate the thinner wall on those hoses.

Shields 7202120 Marine Exhaust Hose T-Bolt 3/4" Band Clamp - 18-720-2120 - 88-7202120F1

Corrosion resistant 316 stainless steel for exhaust or intake - Any below water line application. Works with corrugated hose. Full 360° clamping surface. 3/4" band, extra long 1/4" bolt & nylon insert locknut. Torque to 75 in. lbs. maximum.For Silicone exhaust hose, use "S" series T-Bolt Clamps to accomodate the thinner wall on those hoses.

Shields 7203000 Marine Exhaust Hose T-Bolt 3/4" Band Clamp - 18-720-3000 - 88-7203000F1

Corrosion resistant 316 stainless steel for exhaust or intake - Any below water line application. Works with corrugated hose. Full 360° clamping surface. 3/4" band, extra long 1/4" bolt & nylon insert locknut. Torque to 75 in. lbs. maximum.For Silicone exhaust hose, use "S" series T-Bolt Clamps to accomodate the thinner wall on those hoses.

Shields 7203120 Marine Exhaust Hose T-Bolt 3/4" Band Clamp - 18-720-3120 - 88-7203120F1

Corrosion resistant 316 stainless steel for exhaust or intake - Any below water line application. Works with corrugated hose. Full 360° clamping surface. 3/4" band, extra long 1/4" bolt & nylon insert locknut. Torque to 75 in. lbs. maximum.For Silicone exhaust hose, use "S" series T-Bolt Clamps to accomodate the thinner wall on those hoses.

Shields 7204000 Marine Exhaust Hose T-Bolt 3/4" Band Clamp - 18-720-4000 - 88-7204000F1

Corrosion resistant 316 stainless steel for exhaust or intake - Any below water line application. Works with corrugated hose. Full 360° clamping surface. 3/4" band, extra long 1/4" bolt & nylon insert locknut. Torque to 75 in. lbs. maximum.For Silicone exhaust hose, use "S" series T-Bolt Clamps to accomodate the thinner wall on those hoses.

Shields 7204120 Marine Exhaust Hose T-Bolt 3/4" Band Clamp - 18-720-4120 - 88-7204120F1

Corrosion resistant 316 stainless steel for exhaust or intake - Any below water line application. Works with corrugated hose. Full 360° clamping surface. 3/4" band, extra long 1/4" bolt & nylon insert locknut. Torque to 75 in. lbs. maximum.For Silicone exhaust hose, use "S" series T-Bolt Clamps to accomodate the thinner wall on those hoses.