T-H Marine
1-1/2 X-Long Thru Hull-White - Th1502Xlb - 232-Th1502Xlbf1
High Quality UV and Chemical Resistant Virgin PolyproSized to Fit All Marine Hose
2" Cable Boot Black Bulk - Cb2 - 232-Cb2F1
Provides a fully open area to pass wiring and cables through and when rigging is complete. Constructed of rugged black vinyl that resists UV rays, gasoline and oil.
3" Splashwell Cableboot Black Bul - Cb1 - 232-Cb1F1
Provides a fully open area to pass wiring and cables through and when rigging is complete. Constructed of rugged black vinyl that resists UV rays, gasoline and oil.
6-1/2" Speaker Led Accent Ring, Blue - Led-Smskr-B-Dp - 232-Ledsmskrbdpf1
Accent any 6" round speaker with attractive LEDs. Light up your boat speakersFits behind 6" round speaker enclosuresEasy installationRing contains 30 attractive LEDs
90 Degree Thru-Hull, 1-1/8" Barb, Short - Th1890T - 232-Th1890Tf1
Threaded thru-hull for use with 1-1/8" screw-in overflow drain tube.
90 Degree Thru-Hull, 1-1/8" Barb, Standard - Th1290T - 232-Th1290Tf1
Threaded thru-hull for use with 1-1/8" screw-in overflow drain tube.
90Deg Thru-Hull F/Hose 1-1/2 - Th1592B - 232-Th1592Bf1
High quality UV and chemical resistant virgin polypropelene. Features a finished head and a single pass around nut.
Actuator Hydraulic Assy 7050 Marine Electric Part - 7050 - 232-7050F1
Hydraulic Actuators are completely self contained with their own fluid reservoir. They incorporate the pump, motor, reservoir and cylinder all in the same body. This eliminates the need for multiple hydraulic components such as hoses, pumps and cylinders. Actuator can be utilized in almost any type of environment. Made of 100% non-ferrous materials, they are totally submersible. They contain a no-leak seal and wiper that keeps dirt and water out of the working parts. CMC Power-Lift hydraulic jack plates (models: 61001, 61002, 65001, 65002, 65201)T-H Marine Hydro-Jacker hydraulic jack plates (models: HYJ-6C-DP, HYJ-10C-DP)CMC Power Tilt & Trim Units (PT-35 & PT-130 models: 13001, 13002, 52100)ATLAS Tilt & Trim Units (models: THT-35C-DP, THT-130C-DP, THT-130CGK-DP)
Atlas 4 Hydraulic Jack Plate - Ahjc-4V-Dp - 232-Ahjc4Vdpf1
Designed to meet the demands of today's high performance outboards. This one piece design featuring the innovative Rod and Slot lifting system will handle the stresses from the heaviest and most powerful outboards on the market today. All hydraulics are built into the jack, eliminating the installation of pumps and reservoirs inside the transom as well as hydraulic hoses running through the transom. The high-tech engineered polymer rods are 6 times more abrasion resistant than steel and are manufactured from self-lubricating material. Lifts from top to bottom in 8 seconds and installs in half the time of comparable jacks.
Cable Boot Ring 3" Black Bulk - Cbr1 - 232-Cbr1F1
Provides a fully open area to pass wiring and cables through and when rigging is complete. Constructed of rugged black vinyl that resists UV rays, gasoline and oil.
Cable Bootring 4.5" Black Bulk - Cbr4 - 232-Cbr4F1
Provides a fully open area to pass wiring and cables through and when rigging is complete. Constructed of rugged black vinyl that resists UV rays, gasoline and oil.
Designer Series™ Access Hatches - Locking, 11" X 15" White - Hdsl11152Dp - 232-Hdsl11152Dpf1
Stainless steel lock - prevents unauthorized access Single latch and lid seal for watertight designHidden fasteners in frame
Designer Series™ Access Hatches - Locking, 12-7/8" X 23-3/4" White - Hdsl13242Dp - 232-Hdsl13242Dpf1
Stainless steel lock - prevents unauthorized access Dual latches and lid seal for watertight designHidden fasteners in frame
Designer Series™ Access Hatches - Non-Locking, 11" X 15" White - Hds11151Dp - 232-Hds11151Dpf1
Single latch and lid seal for watertight design Hidden fasteners in frame
Designer Series™ Access Hatches - Non-Locking, 12-7/8" X 23-3/4" Black - Hds13241Dp - 232-Hds13241Dpf1
Stainless steel lock - prevents unauthorized accessSingle latch and lid seal for watertight designHidden fasteners in frame
Floor Drain For 2-1/2 Hole - Fd2Dp - 232-Fd2Dpf1
Molded black plastic. Designed with a flange molded into part to fit into hole, hiding raw or cut edges. Mounts with 4 screws. Bulk packaging.
Floor Drain For 4 Hole - Fd4Dp - 232-Fd4Dpf1
Molded black plastic. Designed with a flange molded into part to fit into hole, hiding raw or cut edges. Mounts with 4 screws. Bulk packaging.
Flow Max Ball Scupper - Fms10Dp - 232-Fms10Dpf1
Positive sealing ball scupper. Seal slotted to fit over 1-1/4" motorwell hole.
Fuel Tank Hold Down Kit - Fch1Dp - 232-Fch1Dpf1
This hold-down kit is manufactured from poly strapping to provide superior strength and good looks. The quick release buckle makes it simple to remove and replace container. The hold-down strap unit comes complete with two 62" poly straps equipped with quick release buckles, four footman loops and mounting hardware.
G-Force Trolling Motor Release & Lift Handle, Black - Gfh1Gdp - 232-Gfh1Gdpf1
The G-Force™ Handle is a replacement for trolling motor release rope technology. This trolling motor replacement release and lift system is a rugged, nylon jacketed stainless steel cable with a large comfortable cushioned grip handle. Fits most models and makes of trolling motors. The G-Force™ Handle comes complete with a hook-n-loop strap to secure to the motor shaft while underway.
G-Force Trolling Motor Release & Lift Handle, Red - Gfh1Rdp - 232-Gfh1Rdpf1
The G-Force™ Handle is a replacement for trolling motor release rope technology. This trolling motor replacement release and lift system is a rugged, nylon jacketed stainless steel cable with a large comfortable cushioned grip handle. Fits most models and makes of trolling motors. The G-Force™ Handle comes complete with a hook-n-loop strap to secure to the motor shaft while underway.
Large Lid Lift - Llr1Dp - 232-Llr1Dpf1
Large 3-finger pull - blackConvenient rectangular shapeEasy to install
Outboard Motor Support Stick, Pr. - Mss1Dp - 232-Mss1Dpf1
Fits over trim rams Supports outboard while trailering Takes the pressure off of hydraulic system Most outboards 150 hp and up Strong aluminum tubing with molded ends Safe for salt or fresh water
Push Plug For 1-1/8", Bulk - Pp18 - 232-Pp118F1
These push in plugs are used to stop water flow through drains or overflows from baitwell or livewell. Also work well as plugs for sink drains and built in cooler drains. These plugs are injection molded of marine grade PVC for a long lifespan. Plugs feature a pull tab or pull ring for easy removal. They have double seal rings to assure positive sealing.
Radius Cable Black 7-1/2" 1000/Pk - 075Bradmdp - 232-075Bradmdpf1
This high tensile strength, light weight, flexible, all nylon and non-corrosive cable tie is an essential item for rigging.
Radiused Cable Tie 7-1/2" Black, 100/Pk - 075Bradcdp - 232-075Bradcdpf1
This high tensile strength, light weight, flexible, all nylon and non-corrosive cable tie is an essential item for rigging.
Screen For Odt1 & Odt190 - Odts1Dp - 232-Odts1Dpf1
These overflow drain tubes feature a tough, flexible vinyl plastic end with a standpipe of white PVC tubing. To use simply insert vinyl end into the opening of thru-hull fitting. To drain livewell or baitwell, simply remove. Can be cut to customer's lengths.
T-H Bounce Buster Coaster - Bbc-1-Dp - 232-Bbc1Dpf1
Protects Decks from Bounce Buster DamageFits Minn Kota Bow Mount Stabilizer RodsFits into Deep Carpet with PadProtects Carpeted Decks from Damage
T-H Led Flush Mount Spreader Light - Led-51913-Dp - 232-Led51913Dpf1
Flood your boat deck with bright and smooth illumination to make low light or night fishing safer and easier. 4 Bright High Intensity 1 Watt LEDsFlush Mount Fits into T-Top RecessesProvide smooth, bright, even lightWide 145° Angle Light SpreadDie cast aluminum housing, powder coated whiteOptical grade PMMA lensCompletely sealed with waterproof rating: IP67
T-H Led Mini Accent Light With Stainless Steel Bezel - Led-39217-Dp - 232-Led39217Dpf1
Small flush mounted light is great for stairs, doors and compartments. Hidden fasteners for a clean look. Two bright LED'sHidden fastenersLow, 38 mA power draw
T-H Led Oval Light With Mounting Ring, White - Led-Ocl-2K-Dp - 232-Ledocl2Kdpf1
Convenience of built-in switch in lens allows you to just push the lens to turn the light on or off. Can be surface or flush mountedFlush Mount Bezel Included
T-H Led Push-In Utility Light With Stainless Steel Bezel - Led-51977-Dp - 232-Led51977Dpf1
Great for lighting a small area. Super easy Installation - drill a hole and push inNo nut in back
T-H Led Push-In Utility Light With Stainless Steel Bezel - Led-51978-Dp - 232-Led51978Dpf1
Great for lighting a small area. Super easy Installation - drill a hole and push inNo nut in back
T-H Marine 12V Complete Pro-Air System Livewell Aeration Kit With Air Stones - Pas1Dp - 232-Pas1Dpf1
Insures long lasting dependable oxygen-rich air source to your livewell or baitwell. Capable of aerating both front and rear livewells at the same time. Complete with pump, two air stone mounts, two air stones, an attractive switch-panel with switch for controlling pump, and 20 feet of air line tubing.
T-H Marine 12V Oval Courtesy Light - Ocl1Kdp - 232-Ocl1Kdpf1
Built-in switch - push lens for "On/Off 12 Volt- 5 Watt - tin wireOval hole - 3 1/4" x 2 1/8"Flange overall - 5" x 3 1/8"
T-H Marine 12V Oval Courtesy Light - Ocl2Kdp - 232-Ocl2Kdpf1
Built-in switch - push lens for "On/Off 12 Volt- 5 Watt - tin wireOval hole - 3 1/4" x 2 1/8"Flange overall - 5" x 3 1/8"
T-H Marine 12V Pro Live Well Oxygenator - O2Bk3Dp - 232-O2Bk3Dpf1
The Oxygenator™ Pro Live Well Flush Mount will retrofit most boat live wells from 10 to 20 gallons and silently operates off the existing boat battery. The Oxygenator™ manufactures 100% pure oxygen by splitting the hydrogen molecule from the oxygen molecule in water. This creates a super saturated oxygen environment, even in the warmest water. 3 Year warranty.
T-H Marine 12V Pump Only For Pro-Air System Livewell Aeration - Pap1Dp - 232-Pap1Dpf1
Insures long lasting dependable oxygen-rich air source to your livewell or baitwell. Capable of aerating both front and rear livewells at the same time. Complete with pump, two air stone mounts, two air stones, an attractive switch-panel with switch for controlling pump, and 20 feet of air line tubing.
T-H Marine 90 Degree Specialty Thru-Hull Fitting With Spanner Head 3/4", Black - Th7590Sdp - 232-Th7590Sdpf1
High quality UV and chemical resistant virgin polypropelene. Features a finished head and a single pass around nut.
T-H Marine 90 Degree Thru-Hull Fitting For Hose - Th1292Dp - 232-Th1292Dpf1
High quality UV and chemical resistant virgin polypropelene. Features a finished head and a single pass around nut.
T-H Marine 90 Degree Thru-Hull Fitting For Hose - Th1590Dp - 232-Th1590Dpf1
High quality UV and chemical resistant virgin polypropelene. Features a finished head and a single pass around nut.
T-H Marine 90 Degree Thru-Hull Fitting For Hose - Th7592Dp - 232-Th7592Dpf1
High quality UV and chemical resistant virgin polypropelene. Features a finished head and a single pass around nut.
T-H Marine Adjustable Steering Console Mount From 10" To 20" H - Scm2Dp - 232-Scm2Dpf1
This aluminum console features welded construction, plywood reinforced face for steering wheel mounting, adjustable height, space for mounting switches and instruments, and a flat top for depth finder mounting. Adaptable to most aluminum or fiberglass boats.
T-H Marine Aerator Filter Dome 1" Hole Id Fits 3/4" Thru-Hull Or Pump - Afd2Dp - 232-Afd2Dpf1
Protects your aerator pump from debris in the water. Two piece filter mounts easily without fasteners by placing the base under a thru hull flange or aerator pump snout. Simply twist/locks on for easy installation or cleaning. Works well as a screen for overflow drains. Mounts behind standard thru-hulls. For 3/4" thru-hull or pump.
T-H Marine Aerator Spray Head/Wash Down Fitting, Black - Ahvwd90Dp - 232-Ahvwd90Dpf1
Single fitting handles both jobsPositive action shut-off valveMulti-directional spray head
T-H Marine Af1Dp Aerator Filter Only Fits Over 3/4" Or 1-1/8" Fittings - Af1Dp - 232-Af1Dpf1
AF1: Screws on over 3/4" or 1-1/8" pump intake fitting.
T-H Marine Ahv1Dp Straight Aerator Head W/Shut-Off Valve, 3/4", Black - Ahv1Dp - 232-Ahv1Dpf1
Straight Aerator Head w/Shut-Off Valve, 3/4" Black
T-H Marine Ahv90Dp Aerator Spray Head 90° Screw On Valve W/Shut Off, 3/4", Black - Ahv90Dp - 232-Ahv90Dpf1
T-H Marine Aerator Spray Head 90° Screw On Valve With Shut-Off 3/4" Black
T-H Marine Ahv92Dp Aerator Spray Head 90° Fixed Flange W/Shut Off, 3/4", White - Ahv92Dp - 232-Ahv92Dpf1
T-H Marine Aerator Spray Head 90° Fixed Flange With Shut-Off 3/4", White
T-H Marine Alc1Dp Locking Anchor Handle Latch, Black Body, Chrome Handle - Alc1Dp - 232-Alc1Dpf1
Easy grip "two finger" handle Waterproof "O" ring sealFor lids up to 3/4" thickFits 2-3/8" to 2-1/2" hole
T-H Marine Alc1Dp Non-Locking Anchor Handle Latch, Black Body W/Black Handle - Aln1Dp - 232-Aln1Dpf1
Easy grip "two finger" handle Waterproof "O" ring sealFor lids up to 3/4" thickFits 2-3/8" to 2-1/2" hole
T-H Marine All Purpose 90° Drain, Concave - Apd-190-Dp - 232-Apd190Dpf1
A low cost method to drain water from virtually anywhere. They have a very low profile head to allow complete drainage. Drains mount easily in a 1-3/8" diameter hole and are secured with the molded nut that is included. Hose barbs fit 3/4" hose for routing of drainage.
T-H Marine All Purpose Straight Drain, Concave - Apd-1-Dp - 232-Apd1Dpf1
A low cost method to drain water from virtually anywhere. They have a very low profile head to allow complete drainage. Drains mount easily in a 1-3/8" diameter hole and are secured with the molded nut that is included. Hose barbs fit 3/4" hose for routing of drainage.
T-H Marine Anchor Master Anchor Retrievel System Without Buoy - Ar0Dp - 232-Ar0Dpf1
Allows a boater to easily and safely retrieve the anchor preventing potential back pain and the danger of falling overboard. Anchor Master™ lets your boat do the work for you. Simply slip ring attached to buoy around anchor line, drive past anchor, and the buoy lifts the anchor to the surface. No springs to malfunction, no plastic parts to break. All stainless steel hardware for a durable, non-corrosive system.
T-H Marine Angled 30 Degree Rod Holder 8-3/4" L Fits 2" Hole, White - Rh1Fwdp - 232-Rh1Fwdpf1
Durable UV stabilized tubes One-piece design for easy installationRod index in bottom of all models
T-H Marine Atlas 10" Hydraulic Jack Plate For Outboards Up To 300Hp - Ahj10Vdp - 232-Ahj10Vdpf1
This high-tech, high-speed, one piece design features an innovative Rod and Slot lift system to handle the stresses from the heaviest and most powerful V6 outboards on the market. All hydraulics are built into the jack, eliminating the installation of pumps and reservoirs inside the transom as well as hydraulic hoses running through the transom. The high-tech engineered polymer rods are 6 times more abrasion resistant than steel and are manufactured from self-lubricating material. Lifts from top to bottom in 8 seconds and installs in half the time of comparable jacks. Handles most outboards including the powerful Verado V6 motors.
T-H Marine Atlas 10" Hydraulic Jack Plate For Outboards Up To 300Hp, Black - Ahj-10V-B-Dp - 232-Ahj10Vbdpf1
This high-tech, high-speed, one piece design features an innovative Rod and Slot lift system to handle the stresses from the heaviest and most powerful V6 outboards on the market. All hydraulics are built into the jack, eliminating the installation of pumps and reservoirs inside the transom as well as hydraulic hoses running through the transom. The high-tech engineered polymer rods are 6 times more abrasion resistant than steel and are manufactured from self-lubricating material. Lifts from top to bottom in 8 seconds and installs in half the time of comparable jacks. Handles most outboards including the powerful Verado V6 motors.
T-H Marine Atlas 12" Hydraulic Jack Plate For Outboards Up To 300Hp - Ahj12Vdp - 232-Ahj12Vdpf1
This high-tech, high-speed, one piece design features an innovative Rod and Slot lift system to handle the stresses from the heaviest and most powerful V6 outboards on the market. All hydraulics are built into the jack, eliminating the installation of pumps and reservoirs inside the transom as well as hydraulic hoses running through the transom. The high-tech engineered polymer rods are 6 times more abrasion resistant than steel and are manufactured from self-lubricating material. Lifts from top to bottom in 8 seconds and installs in half the time of comparable jacks. Handles most outboards including the powerful Verado V6 motors.
T-H Marine Atlas 12" Hydraulic Jack Plate For Outboards Up To 300Hp, Black - Ahj-12V-B-Dp - 232-Ahj12Vbdpf1
This high-tech, high-speed, one piece design features an innovative Rod and Slot lift system to handle the stresses from the heaviest and most powerful V6 outboards on the market. All hydraulics are built into the jack, eliminating the installation of pumps and reservoirs inside the transom as well as hydraulic hoses running through the transom. The high-tech engineered polymer rods are 6 times more abrasion resistant than steel and are manufactured from self-lubricating material. Lifts from top to bottom in 8 seconds and installs in half the time of comparable jacks. Handles most outboards including the powerful Verado V6 motors.
T-H Marine Atlas 4" Hydraulic Jack Plate For Outboards Up To 300Hp, Black - Ahj-4V-B-Dp - 232-Ahj4Vbdpf1
This high-tech, high-speed, one piece design features an innovative Rod and Slot lift system to handle the stresses from the heaviest and most powerful V6 outboards on the market. All hydraulics are built into the jack, eliminating the installation of pumps and reservoirs inside the transom as well as hydraulic hoses running through the transom. The high-tech engineered polymer rods are 6 times more abrasion resistant than steel and are manufactured from self-lubricating material. Lifts from top to bottom in 8 seconds and installs in half the time of comparable jacks. Handles most outboards including the powerful Verado V6 motors.
T-H Marine Atlas 6" Hydraulic Jack Plate For Outboards Up To 300Hp, Black - Ahj-6V-B-Dp - 232-Ahj6Vbdpf1
This high-tech, high-speed, one piece design features an innovative Rod and Slot lift system to handle the stresses from the heaviest and most powerful V6 outboards on the market. All hydraulics are built into the jack, eliminating the installation of pumps and reservoirs inside the transom as well as hydraulic hoses running through the transom. The high-tech engineered polymer rods are 6 times more abrasion resistant than steel and are manufactured from self-lubricating material. Lifts from top to bottom in 8 seconds and installs in half the time of comparable jacks. Handles most outboards including the powerful Verado V6 motors.
T-H Marine Atlas 8" Hydraulic Jack Plate For Outboards Up To 300Hp - Ahj8Vdp - 232-Ahj8Vdpf1
This high-tech, high-speed, one piece design features an innovative Rod and Slot lift system to handle the stresses from the heaviest and most powerful V6 outboards on the market. All hydraulics are built into the jack, eliminating the installation of pumps and reservoirs inside the transom as well as hydraulic hoses running through the transom. The high-tech engineered polymer rods are 6 times more abrasion resistant than steel and are manufactured from self-lubricating material. Lifts from top to bottom in 8 seconds and installs in half the time of comparable jacks. Handles most outboards including the powerful Verado V6 motors.
T-H Marine Atlas 8" Hydraulic Jack Plate For Outboards Up To 300Hp, Black - Ahj-8V-B-Dp - 232-Ahj8Vbdpf1
This high-tech, high-speed, one piece design features an innovative Rod and Slot lift system to handle the stresses from the heaviest and most powerful V6 outboards on the market. All hydraulics are built into the jack, eliminating the installation of pumps and reservoirs inside the transom as well as hydraulic hoses running through the transom. The high-tech engineered polymer rods are 6 times more abrasion resistant than steel and are manufactured from self-lubricating material. Lifts from top to bottom in 8 seconds and installs in half the time of comparable jacks. Handles most outboards including the powerful Verado V6 motors.
T-H Marine Atlas Hydraulic Jack Plate For Outboards Up To 475Hp - Ahj-6Vhd-Dp - 232-Ahj6Vhddpf1
This high-tech, high-speed, one piece design features an innovative Rod and Slot lift system to handle the stresses from the heaviest and most powerful V6 outboards on the market. All hydraulics are built into the jack, eliminating the installation of pumps and reservoirs inside the transom as well as hydraulic hoses running through the transom. The high-tech engineered polymer rods are 6 times more abrasion resistant than steel and are manufactured from self-lubricating material. Lifts from top to bottom in 8 seconds and installs in half the time of comparable jacks. Handles all outboards including the powerful Verado V6 motors.
T-H Marine Atlas Micro Jacker For Outboards Up To 115Hp (Max Wt 425 Lbs.) - Ahjm4Dp - 232-Ahjm4Dpf1
The smallest and lightest hydraulic jack on the market is ideal for shallow water skiffs and flats boats. It has a footprint of only 14-5/8" W x 11-1/2" H with a weight of only 23 lbs. The strong, self-contained actuator takes only 8 seconds to go from top to bottom and has 5" of travel. 3 mounting hole options on the transom side and 2 on the engine side. Optional adapter available to accommodate clamp-on outboard motors if needed.
T-H Marine Atlas Series Digital Position Gauge Kit - Fagk1Ssdp - 232-Fagk1Ssdpf1
Digital LED position gauges fit Atlas hydraulic jack plates. Numbers range from 0-20 and each number indicates a 1/4" rise. Atlas jack plates are predrilled to accept sensors.
T-H Marine Atlas Series Digital Position Gauge Kit - Fagk2Dp - 232-Fagk2Dpf1
Digital LED position gauges fit Atlas hydraulic jack plates. Numbers range from 0-20 and each number indicates a 1/4" rise. Atlas jack plates are predrilled to accept sensors.
T-H Marine Atlas Series Digital Position Gauge Kit - Fagk2Ssdp - 232-Fagk2Ssdpf1
Digital LED position gauges fit Atlas hydraulic jack plates. Numbers range from 0-20 and each number indicates a 1/4" rise. Atlas jack plates are predrilled to accept sensors.
T-H Marine Battery Holder Tray For Optima Batteries D27M And D31M - Nbh31Sscopt - 232-Nbh31Sscoptf1
Shaped inserts fit both Optima®D27M and D31M series Rugged poly tray with 8 mounting slotsPoly strap with stainless steel buckleResistant to UV and corrosion
T-H Marine Bk1Dp Bolt Kit For Jack Plates, Coarse Thread - Bk1Dp - 232-Bk1Dpf1
Bolt kit for mounting outboard engine to jack plates. Kit contains: 4 each 1/2"-13 x 3" long bolts - stainless steel
T-H Marine Brite Plate Chrome Plated 90 Degree Thru Hull For Hose - Th1290Cpdp - 232-Th1290Cpdpf1
High quality UV and chemical resistant virgin polypropelene. Features a finished head and a single pass around nut.
T-H Marine Brite Plate Chrome Plated 90 Degree Thru Hull For Hose - Th1590Cpdp - 232-Th1590Cpdpf1
High quality UV and chemical resistant virgin polypropelene. Features a finished head and a single pass around nut.
T-H Marine Brite Plate Chrome Plated 90 Degree Thru Hull For Hose - Th7590Cpdp - 232-Th7590Cpdpf1
High quality UV and chemical resistant virgin polypropelene. Features a finished head and a single pass around nut.
T-H Marine Bs1Dp 38" Replacement Battery Tray Strap W/Poly Buckle - Bs1Dp - 232-Bs1Dpf1
Replacement strap for TH Marine Battery tray.
T-H Marine Bsr1Kdp Bulkhead Strain Relief Hose Kit - Bsr1Kdp - 232-Bsr1Kdpf1
Distributes strain from bends in .250 OD to .485 OD hose. Watertight gripper fitting-no leaks. Requires 1-1/4" installation hole.For bulk hose only, pre-made hoses with end fittings cannot pass through.
T-H Marine Bwf1Dp Bait Well Filter With Mount Fits 1-1/2" Thru-Hull - Bwf1Dp - 232-Bwf1Dpf1
BWF1: Fits over baitwell drains. Black injection molded base installs under flange on thru-hull fitting and the filter cap simply snaps on.
T-H Marine Cable Boot, Black - Cb4Dp - 232-Cb4Dpf1
Provides a fully open area to pass wiring and cables through and when rigging is complete. Constructed of rugged black vinyl that resists UV rays, gasoline and oil.
T-H Marine Clam Shell Vent (2 Per Pack) - Cs-2-Dp - 232-Cs2Dpf1
Molded, UV and weather resistant.
T-H Marine Clam Shell Vent (2 Per Pack) - Cs1Dp - 232-Cs1Dpf1
Molded, UV and weather resistant.
T-H Marine Clam Shell Vent (2 Per Pack) - Css1Dp - 232-Css1Dpf1
Molded, UV and weather resistant.
T-H Marine Cockpit Scupper Drain 90 Degree Outlet 1-1/2", White - Csd92Dp - 232-Csd92Dpf1
The check ball provides better sealing against reverse water flow that occurs when backing boat. Injection molded part is high strength and UV stabilized to provide value and durabilityTop of cockpit scupper drain is removable for cleaning90° Outlet
T-H Marine Coiled Washed Down Hose With Straight Nozzle - Wdhbr15Bbdp - 232-Wdhbr15Bbdpf1
Coiled poly hoseUV and chemical resistantBrass hose fittings
T-H Marine Coiled Washed Down Hose With Straight Nozzle - Wdhbr15Wbdp - 232-Wdhbr15Wbdpf1
Coiled poly hoseUV and chemical resistantBrass hose fittings
T-H Marine Coiled Washed Down Hose With Straight Nozzle - Wdhbr25Bbdp - 232-Wdhbr25Bbdpf1
Coiled poly hoseUV and chemical resistantBrass hose fittings
T-H Marine Coiled Washed Down Hose With Straight Nozzle - Wdhbr25Wbdp - 232-Wdhbr25Wbdpf1
Coiled poly hoseUV and chemical resistantBrass hose fittings
T-H Marine Dahik118Dp Directional Flow Aerator Head, Fits: 1-1/8" - Dahik-118-Dp - 232-Dahik118Dpf1
Designed to create a vital circular current flow that improves baitfish health and reduces crowding. Creates a strong directional flow of water to help baitfish breathe easier in harsh conditionsCreate a directional flow of water around any baitwellAllows baitfish to breathe easier and live longer in harsh conditionsLow profile, rounded head prevents injury to delicate bait
T-H Marine Designer Series Screw Down Deck Plate 6" Od, Polar White - Dssdp12Dp - 232-Dssdp12Dpf1
Tough Non-corrosive poly material Flanged to fit hole securelyTextured top - smooth tapered edges
T-H Marine Designer Series Screw Down Deck Plate 8" Od, Polar White - Dssdp22Dp - 232-Dssdp22Dpf1
Tough Non-corrosive poly material Flanged to fit hole securelyTextured top - smooth tapered edges
T-H Marine Drain Plug Fits 1" Hose, Black - Dp1Dp - 232-Dp1Dpf1
A screw-type plug made of black nylon and features an O-ring for tight sealing. Fine thread insures sealing under high vibration and prevents cross threading. Mounts in a 1" diameter hole. Black nylon.
T-H Marine Dual Battery Holder Tray With Plastic Buckle For Two Series 27 Deep Cycle Batteries - Dbh27Pdp - 232-Dbh27Pdpf1
Holds two Series 27 deep cycle batteries side by side. Patented poly strap with quick release buckle. Meets all NMMA specs for battery retention. 14-1/2" L x 13-1/8"W x 1" H.
T-H Marine Earth Magnetic Latches (1 Pair) - Maghl-2-Dp - 232-Maghl2Dpf1
Powerful magnetic attractionHolds lids and doors securelyEncased in plastic © won't rust or corrode
T-H Marine Ez-Pump Long 4-3/4" - Ezblk1Dp - 232-Ezblk1Dpf1
UV Stable and rust resistant 3 Sizes fits most installationsEasy installation - no drilling or running hosesScreen and pick-up- All in oneKeeps fish and bait alive longerPrevents livewell system air lockExtends battery life
T-H Marine Ez-Pump Long 4-3/4" - Ezwht1Dp - 232-Ezwht1Dpf1
UV Stable and rust resistant 3 Sizes fits most installationsEasy installation - no drilling or running hosesScreen and pick-up- All in oneKeeps fish and bait alive longerPrevents livewell system air lockExtends battery life
