12" X 18" Beer Flag - 9218 - 32-9218F1

1-sided Perma-print nylon flag with brass grommets.

12" X 18" Cocktail Flag - 9118 - 32-9118F1

1-sided Perma-print nylon flag with brass grommets.

12" X 18" Jolly Roger Flag - 1818 - 32-1818F1

1-sided Perma-print nylon flag with brass grommets.

2 1/4 Dock Guard - 6'Ft - 96000 - 32-96000F1

Made of thick, pliable, abrasion resistant rubber strips which can be nailed along the edges of docks and pilings. Premium rubber material will not mar your boat, but is great for absorbing shock and protecting your hull.

3-1/2" Dock Guard 6' - 96001 - 32-96001F1

Made of thick, pliable, abrasion resistant rubber strips which can be nailed along the edges of docks and pilings. Premium rubber material will not mar your boat, but is great for absorbing shock and protecting your hull.

8'X10' 1.25 Pntn Bmn Kit Beige - 2020329857 - 32-88145F1

8'X10' 1.25 Pntn Bmn Kit Black - 2020329852 - 32-88140F1

8'X10' 1.25 Pntn Bmn Kit Green - 2020329854 - 32-88142F1

8'X10' 1.25 Pntn Bmn Kit Grey - 2020329853 - 32-88141F1

8'X10' 1.25 Pntn Bmn Kit Navy - 2020329855 - 32-88143F1

8'X10' 1.25Pntn Bmn Kit Burgun - 2020329856 - 32-88144F1

8'X10' 1.25Pntn Bmn Kit Pacblu - 2020329858 - 32-88146F1

8'X8' 1.25 Pntn Bmn Kit Beige - 2020329513 - 32-88130F1

8'X8' 1.25 Pntn Bmn Kit Black - 2020329508 - 32-88125F1

8'X8' 1.25 Pntn Bmn Kit Green - 2020329511 - 32-88127F1

8'X8' 1.25 Pntn Bmn Kit Grey - 2020329510 - 32-88126F1

8'X8' 1.25 Pntn Bmn Kit Navy - 2020329509 - 32-88128F1

8'X8' 1.25Pntn Bmn Kit Burgund - 2020329512 - 32-88129F1

8'X8' 1.25Pntn Bmn Kit Pacblue - 2020329505 - 32-88131F1

Aero Buoy 24" Life Ring Orange Ccg Approved - 570001 - 32-570001F1

CCG ApprovedTough polyethylene outer shell resists gas, oil and saltwater. Closed cell foam core for buoyancy. Grab line threading system allows for easy replacement.

Aero Buoy 24" Life Ring White Ccg Approved - 570002 - 32-570002F1

CCG ApprovedTough polyethylene outer shell resists gas, oil and saltwater. Closed cell foam core for buoyancy. Grab line threading system allows for easy replacement.

Big B™ Fender Hanger - 1085 - 32-1085F1

Designed for use on Taylor Made fenders with 3/4" I.D. tubing. May be used on other brands, but due to variation among brands the consumer must verify a tight enough fit between the tube and product for proper function. Center tubes must be small enough to keep the product halves firmly together. Injection molded reinforced nylon for strengthVented to prevent water accumulating in fender tubeProfessional finished lookFits 3/8" diameter rope

Boaters Clothspin Display 48/P - 1651 - 32-1651F1

Made from high quality plastic molded with UV inhibitors. Features incredible holding power, unaffected by saltwater and it floats.

Comm Side Gard White Strght 10' - 46030 - 32-46030F1

Constructed of quality marine grade resins with a double molding process. Profile has heavier wall sections to provide greater protection.

Commercial Dock Edge Large - 46032 - 32-46032F1

Constructed of quality marine grade resins with a double molding process. Profile has heavier wall sections to provide greater protection.

Commercial Dock Edge, Sm. - 46031 - 32-46031F1

Constructed of quality marine grade resins with a double molding process. Profile has heavier wall sections to provide greater protection.

Dealer Disp-W/12 Fender Locks - 91010 - 32-91010F1

Low profile stainless steel peg and bases make hanging fenders fast and easy. The peg fits in old style fender lock brackets. Set includes peg, bracket and screws. Rope size up to 1/4".

Dock Float 24Inx60Inx16In - 246016 - 32-246016F1

Dock Pro Vinyl Dock Edging P-Shape 3-1/8" H X 2" W X 10' L, White - 46012 - 32-46012F1

Constructed of quality marine grade resins with a double molding process. Profile has heavier wall sections to provide greater protection.

Dock Step Double Tread - 47200 - 32-47200F1

Molded in durable UV resistant polyethylene with non-slip pad on top of each step. 1-1/2" wide flange provides adequate mounting surface for docks. Hand rails are available for two and three step models, sold separately.

Dock Step Railing Double Tread - 47201 - 32-47201F1

Molded in durable UV resistant polyethylene with non-slip pad on top of each step. 1-1/2" wide flange provides adequate mounting surface for docks. Hand rails are available for two and three step models, sold separately.

Dock Step Railing Triple Tread - 47301 - 32-47301F1

Molded in durable UV resistant polyethylene with non-slip pad on top of each step. 1-1/2" wide flange provides adequate mounting surface for docks. Hand rails are available for two and three step models, sold separately.

Dock Step-Triple Tread - 47300 - 32-47300F1

Molded in durable UV resistant polyethylene with non-slip pad on top of each step. 1-1/2" wide flange provides adequate mounting surface for docks. Hand rails are available for two and three step models, sold separately.

Dot Fast Female 100/Pak - 100401 - 32-100401F1

Standard snap-on, snap-off design. Snaps on and off in any direction.

Dot Fast Male Wscrw 100/Pak - 100402 - 32-100402F1

Standard snap-on, snap-off design. Snaps on and off in any direction.

Dot Fastener Button 100/Pk - 116401 - 32-116401F1

Specially designed for extra holding power. Releases only in direction of dot. Push down to lock, lift up to release.

Eco Blast Kit - 618 - 32-618F1

A refill valve to permit recharging using any bicycle pump, service station air pump or air compressor in seconds. Operates in all weather and extreme temperatures, works in any position and leaves no rust rings on surfaces. Emits a powerful 120 dB signal that meets all USCG Requirements.#617 Mini Air pump: Use it to quickly refill your EcoBlast rechargeabel signal air horn. Or use it to inflate fenders, bike tires, rafts, toys and more. Comes with 2 interchangeable valves.

Eco Blast Rechargable Air Horn - 616 - 32-616F1

A refill valve to permit recharging using any bicycle pump, service station air pump or air compressor in seconds. Operates in all weather and extreme temperatures, works in any position and leaves no rust rings on surfaces. Emits a powerful 120 dB signal that meets all USCG Requirements.#617 Mini Air pump: Use it to quickly refill your EcoBlast rechargeabel signal air horn. Or use it to inflate fenders, bike tires, rafts, toys and more. Comes with 2 interchangeable valves.

Fender Pwc Yellow Taylor Made - 1067 - 32-1067F1

Fisherman'S Dock Box - 83560 - 32-83560F1

UV gelcoat finish and stainless steel lockable latch and hardware. Gas shock lifts come standard on all models, help to keep your lid open on rocking docks and in higher wind areas and allow for a slower, more controlled closing. This molded dock box is constructed with a smooth interior finish which helps prevent splinters in your in your hands when storing or retrieving your boat accessories. Has all the features of our standard fiberglass dock boxes with the addition of rod holders installed in the underside of the lid. Easily accommodates rods up to 7' long.

Flag 12" X18" Nylon Glo Skunk - 1718 - 32-1718F1

1-sided Perma-print nylon flag with brass grommets.

Flag Usa 250 Anniversary 12X18 - 8419 - 32-8419F1

Lippert Platinum Series Pontoon Furniture, Mobile Cupholder, Beige - 17101501 - 537-433047F1

Designed to seamlessly integrate with all lines of pontoon seating available in the marine market.Our cupholders are designed for functionality while minimizing onboard space usage and providing configuration versatility. Rotationally-molded, marine grade polyethylene frame, designed to resist warping with thicker polyethylene walls, added support and uniqueMultiple foam densities provide support and comfort. Furniture depths and heights are sized for comfort onboardPremium marine grade vinylMildew, UV resistant laminated vinylBonded, polyester, color fast, UV-resistant threadsMildew resistant polyurethane foamLarge dry storage area under hinged seats, livewell ready compartments, channels built into the bases assist with drainageAluminum seat hingesStainless steel staples & mounting fasteners

Low Profl Med Dk Bx 48Wx20Dx18 - 83557 - 32-83557F1

These fiberglass dock boxes are built tough. With a UV gelcoat finish and the stainless steel lockable latch and hardware, these are sure to hold up in the harshest marine environments. They incorporate gas shock lifts, which come standard on all models. These shocks help to keep your lid open on rocking docks and in higher wind areas. Smooth surface interior finish.

Low Profl Sm Dkbx 40Wx19Dx20H - 83550 - 32-83550F1

These fiberglass dock boxes are built tough. With a UV gelcoat finish and the stainless steel lockable latch and hardware, these are sure to hold up in the harshest marine environments. They incorporate gas shock lifts, which come standard on all models. These shocks help to keep your lid open on rocking docks and in higher wind areas. Smooth surface interior finish.

Margarita Flag - 9818 - 32-9818F1

1-sided Perma-print nylon flag with brass grommets.

Marine Beanbag Wht Blu Teardrop Beanbag - 81002 - 32-81002F1

Net Buoy - 904715 - 32-904715F1

For commercial use.

Pontoon Adj Display 36/Pk - 11391 - 32-11391F1

A fender adjuster designed specifically for the 1" square tube rails of pontoon boats. The mounting structure clamps securely to square tubing yet can be repositioned quickly and easily. Made from quality marine grade components -simple height adjustment for lines up to 1/2".

Stainless Gas Lift Hardware, 10Mm Ball Stud - 1892 - 32-1892F1

Ball studs can be easily swapped out on any of our mounts by simply unscrewing the existing ball stud and replacing it with the other size.

Stainless Gas Lift Hardware, 13Mm Ball Stud - 1890 - 32-1890F1

Ball studs can be easily swapped out on any of our mounts by simply unscrewing the existing ball stud and replacing it with the other size.

Stainless Gas Lift Hardware, Angled Mount Bracket W/Ball Stud - 1888 - 32-1888F1

Ball studs can be easily swapped out on any of our mounts by simply unscrewing the existing ball stud and replacing it with the other size.

Stainless Gas Lift Hardware, Angled Mounting Bracket, Pair - 1883 - 32-1883F1

Ball studs can be easily swapped out on any of our mounts by simply unscrewing the existing ball stud and replacing it with the other size.

Stainless Gas Lift Hardware, Double Angle Mounting Brackt, Pair - 1891 - 32-1891F1

Ball studs can be easily swapped out on any of our mounts by simply unscrewing the existing ball stud and replacing it with the other size.

Stainless Gas Lift Hardware, Flat Mounting Brackt W/Ball Stud, Pair - 1886 - 32-1886F1

Ball studs can be easily swapped out on any of our mounts by simply unscrewing the existing ball stud and replacing it with the other size.

Std Deep Med Dk Box 72Wx26Dx27 - 83554 - 32-83554F1

These fiberglass dock boxes are built tough. With a UV gelcoat finish and the stainless steel lockable latch and hardware, these are sure to hold up in the harshest marine environments. They incorporate gas shock lifts, which come standard on all models. These shocks help to keep your lid open on rocking docks and in higher wind areas. Smooth surface interior finish.

Std Deep Smal Dk Bx 46Wx26Dx27 - 83553 - 32-83553F1

These fiberglass dock boxes are built tough. With a UV gelcoat finish and the stainless steel lockable latch and hardware, these are sure to hold up in the harshest marine environments. They incorporate gas shock lifts, which come standard on all models. These shocks help to keep your lid open on rocking docks and in higher wind areas. Smooth surface interior finish.

Std Med Dock Box 72Wx23Dx24H - 83552 - 32-83552F1

These fiberglass dock boxes are built tough. With a UV gelcoat finish and the stainless steel lockable latch and hardware, these are sure to hold up in the harshest marine environments. They incorporate gas shock lifts, which come standard on all models. These shocks help to keep your lid open on rocking docks and in higher wind areas. Smooth surface interior finish.

Std Small Dock Box 54Wx22Dx24H - 83562 - 32-83562F1

These fiberglass dock boxes are built tough. With a UV gelcoat finish and the stainless steel lockable latch and hardware, these are sure to hold up in the harshest marine environments. They incorporate gas shock lifts, which come standard on all models. These shocks help to keep your lid open on rocking docks and in higher wind areas. Smooth surface interior finish.

Stdlg. Dock Box 85Wx22Dx24H - 83551 - 32-83551F1

These fiberglass dock boxes are built tough. With a UV gelcoat finish and the stainless steel lockable latch and hardware, these are sure to hold up in the harshest marine environments. They incorporate gas shock lifts, which come standard on all models. These shocks help to keep your lid open on rocking docks and in higher wind areas. Smooth surface interior finish.

Stow 'N Go Triangle Dock Box - 123661 - 32-123661F1

Our durable UV-resistant polyethylene storage box is now available in a triangle configuration designed to accommodate most electric power units. Triangle shape allows the unit to fit snuggly in the little gusset found on most docks.

Stow N' Go Dock Box - 43" White - 123650 - 32-123650F1

A durable polyethylene box that's perfect for your dock, pool or patio. Manufactured with the highest quality, 100% maintenance-free, UV-resistant polyethylene resin. The double-walled lid is secured with a stainless latch, creating a weather proof design to ensure your contents remain protected and dry.

Stow N' Go Dock Box - 67" White - 123750 - 32-123750F1

A durable polyethylene box that's perfect for your dock, pool or patio. Manufactured with the highest quality, 100% maintenance-free, UV-resistant polyethylene resin. The double-walled lid is secured with a stainless latch, creating a weather proof design to ensure your contents remain protected and dry.

Sur-Mark™ Marker Buoy - 18-2412 - 32-46104F1

Exclusive high performance design, stability, high visibility and 3 year limited warranty. Self-righting, internal ballast allows buoy to right itself without requiring additional external ballast. Marks swim areas, no wake zones, hazards, other dangers. Large ring is 18", which will be fully submerged. Label not included.

Taylor "D" Sponge Gasket For Hatches 7' - 1725 - 32-1725F1

For Taylor Made hatches model years 1990 to present.

Taylor "One-Way" Boat Cover Snaps (Set Of 4) - 16401 - 32-16401F1

Specially designed for extra holding power. Releases only in direction of dot. Push down to lock, lift up to release.

Taylor "One-Way" Boat Cover Snaps (Set Of 4) - 16402 - 32-16402F1

Specially designed for extra holding power. Releases only in direction of dot. Push down to lock, lift up to release.

Taylor #2 Brass Grommets And Washers (12 Sets) - 1231 - 32-1231F1

Perfect for boat covers, tarps, tents and fabric. Quickly installs #2 size grommets with 3/8" hole. Set contains 18 #2 brass grommets and washers. "Vision Packed" on display card.

Taylor 1021 Hull Gard Inflatable Fender, 4-1/2" X 16", White - 1021 - 32-1021F1

Oval-shaped design minimizes rolling motion and reduces hull rub. Molded-in eyelets withstand the constant pull and tug of everyday usage. Molded-in inflation valves allow you to customize the pressure for maximum effectiveness. Extra soft, tough and shiny. Valve seats are integrally molded into the fender, not glued in. Lifetime guarantee.

Taylor 1022 Hull Gard Inflatable Fender, 5-1/2" X 20", White - 1022 - 32-1022F1

Oval-shaped design minimizes rolling motion and reduces hull rub. Molded-in eyelets withstand the constant pull and tug of everyday usage. Molded-in inflation valves allow you to customize the pressure for maximum effectiveness. Extra soft, tough and shiny. Valve seats are integrally molded into the fender, not glued in. Lifetime guarantee.

Taylor 1023 Hull Gard Inflatable Fender, 6-1/2" X 23", White - 1023 - 32-1023F1

Oval-shaped design minimizes rolling motion and reduces hull rub. Molded-in eyelets withstand the constant pull and tug of everyday usage. Molded-in inflation valves allow you to customize the pressure for maximum effectiveness. Extra soft, tough and shiny. Valve seats are integrally molded into the fender, not glued in. Lifetime guarantee.

Taylor 1024 Hull Gard Inflatable Fender, 10-1/2" X 30", White - 1024 - 32-1024F1

Oval-shaped design minimizes rolling motion and reduces hull rub. Molded-in eyelets withstand the constant pull and tug of everyday usage. Molded-in inflation valves allow you to customize the pressure for maximum effectiveness. Extra soft, tough and shiny. Valve seats are integrally molded into the fender, not glued in. Lifetime guarantee.

Taylor 1025 Big B Inflatable Fender, 6" X 15", White - 1025 - 32-1025F1

These fenders feature a tubular center for end-to-end line passage. Ribbed sides keep fenders in position and minimize roll. Built-in black valve allows you to inflate the fender to just the right pressure. Can be hung vertically or horizontally. Recommended inflation is 2 PSI. Extra soft, tough and shiny.

Taylor 1026 Big B Inflatable Fender, 8" X 20", White - 1026 - 32-1026F1

These fenders feature a tubular center for end-to-end line passage. Ribbed sides keep fenders in position and minimize roll. Built-in black valve allows you to inflate the fender to just the right pressure. Can be hung vertically or horizontally. Recommended inflation is 2 PSI. Extra soft, tough and shiny.

Taylor 1028 Hull Gard Inflatable Fender, 8-1/2" X 27", White - 1028 - 32-1028F1

Oval-shaped design minimizes rolling motion and reduces hull rub. Molded-in eyelets withstand the constant pull and tug of everyday usage. Molded-in inflation valves allow you to customize the pressure for maximum effectiveness. Extra soft, tough and shiny. Valve seats are integrally molded into the fender, not glued in. Lifetime guarantee.

Taylor 1032 Big B Inflatable Fender, 10" X 26", White - 1032 - 32-1032F1

These fenders feature a tubular center for end-to-end line passage. Ribbed sides keep fenders in position and minimize roll. Built-in black valve allows you to inflate the fender to just the right pressure. Can be hung vertically or horizontally. Recommended inflation is 2 PSI. Extra soft, tough and shiny.

Taylor 1034 Big B Inflatable Fender, 12" X 34", White - 1034 - 32-1034F1

These fenders feature a tubular center for end-to-end line passage. Ribbed sides keep fenders in position and minimize roll. Built-in black valve allows you to inflate the fender to just the right pressure. Can be hung vertically or horizontally. Recommended inflation is 2 PSI. Extra soft, tough and shiny.

Taylor 1092 Quick Draw™ Fender Adjuster - 1092 - 32-1092F1

Two Quick Draw Fender Hangers can be used together to horizontally hang a Big B, Storm Gard, or Hull Gard fender. (Sold individually). Holds tightly to Bow Rails, Grab Rails, Lifelines, Cleats and moreInstantly adjust the height of your fender with a push of a buttonStainless steel screws & internal springFits 1/4" - 1/2" fender lines

Taylor 1185 Tuff End Fender, 8" X 27", White - 1185 - 32-1185F1

Solid vinyl ends for extra strength. Dual purpose bivalve construction. Inflate with hand pump and football-type pin or simply remove screw-in tri-valve and use foot pump or similar high pressure device. Removal also allows rapid deflation. Recommended inflation is 2 PSI. High performance and looks great.

Taylor 1188 Tuff End Fender, 10" X 30", White - 1188 - 32-1188F1

Solid vinyl ends for extra strength. Dual purpose bivalve construction. Inflate with hand pump and football-type pin or simply remove screw-in tri-valve and use foot pump or similar high pressure device. Removal also allows rapid deflation. Recommended inflation is 2 PSI. High performance and looks great.

Taylor 1191 Tuff End Fender, 12" X 35", White - 1191 - 32-1191F1

Solid vinyl ends for extra strength. Dual purpose bivalve construction. Inflate with hand pump and football-type pin or simply remove screw-in tri-valve and use foot pump or similar high pressure device. Removal also allows rapid deflation. Recommended inflation is 2 PSI. High performance and looks great.

Taylor 11992 Super Support Pole W/Canvas Snap, Grommet Tip & Plain End Cap, 36"-64" - 11992 - 32-11992F1

This fully adjustable aluminum support pole is 3 support poles in one. Includes a male canvas snap, grommet tip, and plain end cap with the pole. If you have a female canvas snap or a grommet on your boat cover, you can get a support that will work with your cover. A durable plastic adjuster sets the correct height for your cover.

Taylor 11993 Adjustable Tie-Down Strap 6' Long With Stainless Steel Ring On One End And Snap On Other - Black, 2/Pk - 11993 - 32-11993F1

1" Strap fitted with a ring at one end and a snap on the other. Great for securing biminis and awnings.

Taylor 12" X 18" Military Flag - 1617 - 32-1617F1

With brass grommets. Screen printed on our vibrant bright nylon colors. Flag colors may vary.

Taylor 12" X 18" Military Flag - 1618 - 32-1618F1

With brass grommets. Screen printed on our vibrant bright nylon colors. Flag colors may vary.

Taylor 12" X 18" Military Flag - 1619 - 32-1619F1

With brass grommets. Screen printed on our vibrant bright nylon colors. Flag colors may vary.

Taylor 12" X 18" Military Flag - 1620 - 32-1620F1

With brass grommets. Screen printed on our vibrant bright nylon colors. Flag colors may vary.

Taylor 12444 Power Pro Portable Pressure Washer - 12444 - 32-12444F1

From bird droppings to sandy feet, dirty anchors, and anything and everything that gets brought, dropped, and dragged onto your boat, our portable power cleaner gives you the ability to drop a line in the water, and spray the debris away in minutes. No spigots or bulky hose lines required. 520 max PSILightweight and easy to transportComplete with (2) 40V Lithium Ion batteriesHigh & low pressure settingsLong nozzle & rotatable nozzle included6-in-1 spray attachment25 oz. soap bottleUp to 28 minutes of battery life at max power4 hour charging time per battery

Taylor 14" Pvc Dock Post Guide Wheel - 1214 - 32-1214F1

Flexible PVC dock wheels are designed to rotate around standard 1.5" dock pipe. Made of heavy duty marine grade vinyl with wear resistant center axle bushing. Wheels can be placed over standard 1.5" diameter pipe for use as free floating boat guides or can be mounted to any custom dock bracket which uses 1.5" diameter pipe. Wheels can be stacked together for added protection. Molded from UV resistant, Marine Grade Vinyl14" Diameter with 2" inside diameter reinforcement bushing.Inflation valve to adjust firmness

Taylor 17" Decorative Ring Buoy, White/Blue (Not A Life Saving Device) - 371 - 32-371F1

Rings are constructed from waterproof nonabsorbent closed-cell foam. Comes equipped with sewn-in polypropylene grab lines and decorative blue bands. Not USCG approved. Decorative Use Only. Not a life saving device.

Taylor 20" Decorative Ring Buoy, White/Blue (Not A Life Saving Device) - 372 - 32-372F1

Rings are constructed from waterproof nonabsorbent closed-cell foam. Comes equipped with sewn-in polypropylene grab lines and decorative blue bands.Not USCG approved. Decorative Use Only. Not a life saving device.

Taylor 2000 Adjustable Tie-Down Strap 6' Long With Stainless Steel Ring On One End And Snap On Other - White, 2/Pk - 2000 - 32-2000F1

1" Strap fitted with a ring at one end and a snap on the other. Great for securing biminis and awnings.

Taylor 2020000297 Sureshade Power Bimini, Black W/Clear Anodized Frame - - 32-2020000297 Superseded By: 239-2024050714F1

Upgrade your pontoon boat's bimini shade with the SureShade® Power Bimini. This innovative shade solution takes the hassle out of manually setting up and adjusting your pontoon boat's top. With the flip of a switch, you can deploy it effortlessly. Hard Wired Power Bimini is powered by two 12V DC electric actuators and connects directly to your boat's battery and is conveniently operated at the helm with the flip of a switch or with the included keychain remote control. Operating voltage: 12V DC. Adjust bimini top with the flip of switchMarine-grade, fade-resistant canvasTelescopic frame fits 92-102" wide boats and mounts to any pontoon rail system10' long canvas provides 30% more coverage than standard bimini topsIncludes locking, zippered pockets for easy canvas storageAllows for speeds up to 25mphCompatible with the Speed Top and Bimini Extension1 year waranty

Taylor 2020000298 Sureshade Power Bimini, Beige W/Clear Anodized Frame - - 32-2020000298 Superseded By: 239-2024050709F1

Upgrade your pontoon boat's bimini shade with the SureShade® Power Bimini. This innovative shade solution takes the hassle out of manually setting up and adjusting your pontoon boat's top. With the flip of a switch, you can deploy it effortlessly. Hard Wired Power Bimini is powered by two 12V DC electric actuators and connects directly to your boat's battery and is conveniently operated at the helm with the flip of a switch or with the included keychain remote control. Operating voltage: 12V DC. Adjust bimini top with the flip of switchMarine-grade, fade-resistant canvasTelescopic frame fits 92-102" wide boats and mounts to any pontoon rail system10' long canvas provides 30% more coverage than standard bimini topsIncludes locking, zippered pockets for easy canvas storageAllows for speeds up to 25mphCompatible with the Speed Top and Bimini Extension1 year waranty

Taylor 2020000305 Sureshade Power Bimini, Beige W/Black Anodized Frame - - 32-2020000305 Superseded By: 239-2024050705F1

Upgrade your pontoon boat's bimini shade with the SureShade® Power Bimini. This innovative shade solution takes the hassle out of manually setting up and adjusting your pontoon boat's top. With the flip of a switch, you can deploy it effortlessly. Hard Wired Power Bimini is powered by two 12V DC electric actuators and connects directly to your boat's battery and is conveniently operated at the helm with the flip of a switch or with the included keychain remote control. Operating voltage: 12V DC. Adjust bimini top with the flip of switchMarine-grade, fade-resistant canvasTelescopic frame fits 92-102" wide boats and mounts to any pontoon rail system10' long canvas provides 30% more coverage than standard bimini topsIncludes locking, zippered pockets for easy canvas storageAllows for speeds up to 25mphCompatible with the Speed Top and Bimini Extension1 year waranty

Taylor 2020000308 Sureshade Power Bimini, Navy W/Black Anodized Frame - - 32-2020000308 Superseded By: 239-2024050707F1

Upgrade your pontoon boat's bimini shade with the SureShade® Power Bimini. This innovative shade solution takes the hassle out of manually setting up and adjusting your pontoon boat's top. With the flip of a switch, you can deploy it effortlessly. Rechargeable Battery Powered Bimini is powered by one 20V (2.0Ah) rechargeable Lithium-Ion battery that provides 30 open and close cycles on a single two-hour charge and stays charged for up to 40 days while not in use. The kit comes with a battery charger and two 20V batteries, keep one on the charge and swap out if needed. No need to run wires through the frame as the receiver is installed directly onto the boat deck next to the helm rail. It can be controlled with the touch switch installed on the helm rail or from anywhere on the boat with the SureShade Connect app. Adjust bimini top with the flip of switchMarine-grade, fade-resistant canvasTelescopic frame fits 92-102" wide boats and mounts to any pontoon rail system10' long canvas provides 30% more coverage than standard bimini topsIncludes locking, zippered pockets for easy canvas storageAllows for speeds up to 25mphCompatible with the Speed Top and Bimini Extension1 year waranty

Taylor 2021133086 Sureshade Power Bimini W/Battery Option, Black W/Clear Anodized Frame - - 32-2021133086 Superseded By: 239-2024050714F1

Upgrade your pontoon boat's bimini shade with the SureShade® Power Bimini. This innovative shade solution takes the hassle out of manually setting up and adjusting your pontoon boat's top. With the flip of a switch, you can deploy it effortlessly. Rechargeable Battery Powered Bimini is powered by one 20V (2.0Ah) rechargeable Lithium-Ion battery that provides 30 open and close cycles on a single two-hour charge and stays charged for up to 40 days while not in use. The kit comes with a battery charger and two 20V batteries, keep one on the charge and swap out if needed. No need to run wires through the frame as the receiver is installed directly onto the boat deck next to the helm rail. It can be controlled with the touch switch installed on the helm rail or from anywhere on the boat with the SureShade Connect app. Adjust bimini top with the flip of switchMarine-grade, fade-resistant canvasTelescopic frame fits 92-102" wide boats and mounts to any pontoon rail system10' long canvas provides 30% more coverage than standard bimini topsIncludes locking, zippered pockets for easy canvas storageAllows for speeds up to 25mphCompatible with the Speed Top and Bimini Extension1 year waranty

Taylor 2021133088 Sureshade Power Bimini W/Battery Option, Beige W/Clear Anodized Frame - - 32-2021133088 Superseded By: 239-2024050709F1

Upgrade your pontoon boat's bimini shade with the SureShade® Power Bimini. This innovative shade solution takes the hassle out of manually setting up and adjusting your pontoon boat's top. With the flip of a switch, you can deploy it effortlessly. Rechargeable Battery Powered Bimini is powered by one 20V (2.0Ah) rechargeable Lithium-Ion battery that provides 30 open and close cycles on a single two-hour charge and stays charged for up to 40 days while not in use. The kit comes with a battery charger and two 20V batteries, keep one on the charge and swap out if needed. No need to run wires through the frame as the receiver is installed directly onto the boat deck next to the helm rail. It can be controlled with the touch switch installed on the helm rail or from anywhere on the boat with the SureShade Connect app. Adjust bimini top with the flip of switchMarine-grade, fade-resistant canvasTelescopic frame fits 92-102" wide boats and mounts to any pontoon rail system10' long canvas provides 30% more coverage than standard bimini topsIncludes locking, zippered pockets for easy canvas storageAllows for speeds up to 25mphCompatible with the Speed Top and Bimini Extension1 year waranty

Taylor 2021133089 Sureshade Power Bimini W/Battery Option, Beige W/Black Anodized Frame - - 32-2021133089 Superseded By: 239-2024050705F1

Upgrade your pontoon boat's bimini shade with the SureShade® Power Bimini. This innovative shade solution takes the hassle out of manually setting up and adjusting your pontoon boat's top. With the flip of a switch, you can deploy it effortlessly. Rechargeable Battery Powered Bimini is powered by one 20V (2.0Ah) rechargeable Lithium-Ion battery that provides 30 open and close cycles on a single two-hour charge and stays charged for up to 40 days while not in use. The kit comes with a battery charger and two 20V batteries, keep one on the charge and swap out if needed. No need to run wires through the frame as the receiver is installed directly onto the boat deck next to the helm rail. It can be controlled with the touch switch installed on the helm rail or from anywhere on the boat with the SureShade Connect app. Adjust bimini top with the flip of switchMarine-grade, fade-resistant canvasTelescopic frame fits 92-102" wide boats and mounts to any pontoon rail system10' long canvas provides 30% more coverage than standard bimini topsIncludes locking, zippered pockets for easy canvas storageAllows for speeds up to 25mphCompatible with the Speed Top and Bimini Extension1 year waranty

Taylor 22135 Sully Stick Winter Stick - 22135 - 32-22135F1

A long tapered buoy used in place of a standard round mooring buoy during the winter months. The Sully Stick has a molded in eyelet at the top for easy retrieval. The base eyelet is reinforced with a galvanized metal bushing to attach a rope and connect to the anchor chain. The shape of the Sully stick helps it escape ice entrapment better than a round buoy and can extend the useful life of a mooring buoy by protecting it from the damaging effects of freezing temperatures.

Taylor 2318 Texas Ensign - 2318 - 32-2318F1

Features brass grommets.

Taylor 24" Rigid Dock Roller Wheel - 1224 - 32-1224F1

Plastic dock wheels are designed for roll-in docks and boat lifts. Made of UV stabilized heavy duty, rotomolded polyethylene. Large diameter rolls easily on all terrains. Designed for maximum strength with no maintenance requirements. Pre drilled with drain holes. Fits axle sizes 1.60" to 1.90" diameter.

Taylor 25" Decorative Ring Buoy, White/Blue (Not A Life Saving Device) - 373 - 32-373F1

Rings are constructed from waterproof nonabsorbent closed-cell foam. Comes equipped with sewn-in polypropylene grab lines and decorative blue bands. Not USCG approved. Decorative Use Only. Not a life saving device.

Taylor 252000 Storm Gard Fender, 5.5" X 20", White - 252000 - 32-252000F1

Our team of engineers has spent countless hours creating our patented True Color pearlescent-infused Storm Gard fenders. Pearlescent color mixes match the most popular colors used in today's gelcoats and trim. Our patented color enhancement process provides deeper richer colors. Integrated color agents add luster in the sunlight. The ultimate finishing touch for your boat. Made in the USA. Lifetime Guarantee.

Taylor 252000Sr Sea Ray Storm Gard™ Inflatable Fender, 5-1/2 X 20", White - 252000Sr - 32-252000Srf1

Featuring the Sea Ray logo on every fender, the pearlescent color mixes for our fenders closely matches the most popular colors used in Sea Ray's gelcoats and trim. Now you can select from these vibrant fender colors to perfectly match your boat.

Taylor 252004 Storm Gard Fender, 5.5" X 20", Mid Atlantic Blue - 252004 - 32-252004F1

Our team of engineers has spent countless hours creating our patented True Color pearlescent-infused Storm Gard fenders. Pearlescent color mixes match the most popular colors used in today's gelcoats and trim. Our patented color enhancement process provides deeper richer colors. Integrated color agents add luster in the sunlight. The ultimate finishing touch for your boat. Made in the USA. Lifetime Guarantee.

Taylor 252007 Storm Gard Fender, 5.5" X 20", Black Onyx - 252007 - 32-252007F1

Our team of engineers has spent countless hours creating our patented True Color pearlescent-infused Storm Gard fenders. Pearlescent color mixes match the most popular colors used in today's gelcoats and trim. Our patented color enhancement process provides deeper richer colors. Integrated color agents add luster in the sunlight. The ultimate finishing touch for your boat. Made in the USA. Lifetime Guarantee.

Taylor 252047 Storm Gard Fender, 5.5" X 20", Silver Mist - 252047 - 32-252047F1

Our team of engineers has spent countless hours creating our patented True Color pearlescent-infused Storm Gard fenders. Pearlescent color mixes match the most popular colors used in today's gelcoats and trim. Our patented color enhancement process provides deeper richer colors. Integrated color agents add luster in the sunlight. The ultimate finishing touch for your boat. Made in the USA. Lifetime Guarantee.

Taylor 252053 Storm Gard Fender, 5.5" X 20", Burgundy - 252053 - 32-252053F1

Our team of engineers has spent countless hours creating our patented True Color pearlescent-infused Storm Gard fenders. Pearlescent color mixes match the most popular colors used in today's gelcoats and trim. Our patented color enhancement process provides deeper richer colors. Integrated color agents add luster in the sunlight. The ultimate finishing touch for your boat. Made in the USA. Lifetime Guarantee.