Select Category
Brands
(On)-Off-(On) Toggle Dpdt - 55054-Bp - 12-55054Bpf1
12-36V DC (25A at 12V). Standard 11/16" handle. Silver contacts. On in parenthesis (On) indicates a momentary position.
# 885 Fleetwax - 885 - 244-885F1
The ultimate in Collinite staying power and longevity. Provides a shine that's unmistakably carnauba with durability that rivals even that of leading sealants. Long-lasting protection guards against UV, salt spray, marine growth, stains etc.
#218 Fine Line Mask Tape 1" X 60 Yds - 4700 - 71-04700F1
This specially extruded matte finish, light green color polypropylene tape provides the finest color line separation available. Stretches easily for smooth curves, yet tears easily by hand. Excellent solvent and moisture resistance. Not for extended outdoor use.
#218 Fine Line Mask Tape 1/2" X 60 Yds - 4698 - 71-04698F1
This specially extruded matte finish, light green color polypropylene tape provides the finest color line separation available. Stretches easily for smooth curves, yet tears easily by hand. Excellent solvent and moisture resistance. Not for extended outdoor use.
#218 Fine Line Mask Tape 1/4" X 60 Yds - 021200-06301 - 71-06301F1
This specially extruded matte finish, light green color polypropylene tape provides the finest color line separation available. Stretches easily for smooth curves, yet tears easily by hand. Excellent solvent and moisture resistance. Not for extended outdoor use.
#218 Fine Line Mask Tape 1/8" X 60 Yds - 6300 - 71-06300F1
This specially extruded matte finish, light green color polypropylene tape provides the finest color line separation available. Stretches easily for smooth curves, yet tears easily by hand. Excellent solvent and moisture resistance. Not for extended outdoor use.
#218 Fine Line Mask Tape 3/4" X 60 Yds - 4699 - 71-04699F1
This specially extruded matte finish, light green color polypropylene tape provides the finest color line separation available. Stretches easily for smooth curves, yet tears easily by hand. Excellent solvent and moisture resistance. Not for extended outdoor use.
#256 Lime Green Tape 1 - 4968 - 71-04968F1
Smooth sharp edge and doesn't lose its shape when applied over a long, continuous horizontal surface. Has time limits when exposed to ultraviolet.
#256 Lime Green Tape 3/4 - 5423 - 71-05423F1
Smooth sharp edge and doesn't lose its shape when applied over a long, continuous horizontal surface. Has time limits when exposed to ultraviolet.
#35 Vinyl Elect Tape 3/4 Blue - 10836 - 71-10836F1
Scotch® Vinyl electrical color coding tape 35 is used in phase identification, color coding leads and piping systems and for marking safety areas. This tape is abrasion- and weather-resistant, with excellent mechanical and electrical insulation properties that wraps smoothly and holds tight over a wide range of temperatures. UL Listed and CSA Certified, and is flame-retardant.
#35 Vinyl Elect Tape 3/4 Green - 10851 - 71-10851F1
Scotch® Vinyl electrical color coding tape 35 is used in phase identification, color coding leads and piping systems and for marking safety areas. This tape is abrasion- and weather-resistant, with excellent mechanical and electrical insulation properties that wraps smoothly and holds tight over a wide range of temperatures. UL Listed and CSA Certified, and is flame-retardant.
#35 Vinyl Elect Tape 3/4 Red - 10810 - 71-10810F1
Scotch® Vinyl electrical color coding tape 35 is used in phase identification, color coding leads and piping systems and for marking safety areas. This tape is abrasion- and weather-resistant, with excellent mechanical and electrical insulation properties that wraps smoothly and holds tight over a wide range of temperatures. UL Listed and CSA Certified, and is flame-retardant.
#35 Vinyl Elect Tape 3/4 White - 10828 - 71-10828F1
Scotch® Vinyl electrical color coding tape 35 is used in phase identification, color coding leads and piping systems and for marking safety areas. This tape is abrasion- and weather-resistant, with excellent mechanical and electrical insulation properties that wraps smoothly and holds tight over a wide range of temperatures. UL Listed and CSA Certified, and is flame-retardant.
#390 Ssb - 390 - 167-390F1
Whip antenna with conductors running full-length (no loading coil). Reinforced insulating qualities allow input power up to 1 kw. Conductors are permanently sealed in Shakespeare white fiberglass. Chrome-plated brass ferrules, bottom ferrule has 1"-14 thread. Side feed termination band. Two sections: base 162", tip 112". Suggested mount: 409 or 410 mounting kit.
#3961 5' Basic Vhf Antenna - 396-1 - 167-3961F1
3dB center-fed 1/2 wave coaxial sleeve. Designed to reduce signal fading in rough seas. This is probably the most widely used antenna on Coast Guard Vessels. Brass and copper elements, Chrome-plated brass ferrule with standard 1"-14 thread, includes 15' RG-58 cable and a PL-259 connector. One section. Suggested mount: 4187 (ratchet mount).
#4186-U 4-Way Ratchet Mount - 4186-U - 167-4186Uf1
Solid nylon with handle for deck or bulkhead mounting. 1"-14 male thread. Not for antennas longer than 8' in self-supporting mode-will nullify all warranties.
#4190 Stainless Steel Rail Mount - 4190 - 167-4190F1
Designed for quick and easy installation on 7/8" and 1" vertical or horizontal rails. Handles up to 8' antennas and has feed-thru provision for Loran cable.
#4365 Straight Mount - 4365 - 167-4365F1
4" high. 1"-14 thread. Stainless steel. Perfect for radar arches. May be used with #4364 1' extension.
#471 Blue Plastic Tape 1 - 3121 - 71-03121F1
Highly conformable, excellent for masking off areas for detailed design and bootstripe painting. Also excellent for masking over rivets on aluminum.
#471 Blue Plastic Tape 1/4 - 6405 - 71-06405F1
Highly conformable, excellent for masking off areas for detailed design and bootstripe painting. Also excellent for masking over rivets on aluminum.
#471 Blue Plastic Tape 3/4 - 3120 - 71-03120F1
Highly conformable, excellent for masking off areas for detailed design and bootstripe painting. Also excellent for masking over rivets on aluminum.
#5235Xt Galaxy Am/Fm - 5235-Xt - 167-5235Xtf1
Entertainment band. This antenna reaches out to pick up those AM/FM signals from afar. Copper elements, stainless ferrule with standard 1"-14 thread. Includes 20' RG-69 cable with Motorola type plug installed. Suggested mount: 4187 ratchet.
#5239 Galaxy® World Band Cellular Antenna - 5239 - 167-5239F1
The Galaxy 5239 world band marine cellular antenna is our smallest Galaxy antenna, but don't let the size fool you. This world-band antenna provides coverage for 2G/3G/4G and WLAN systems for Cellular, PCS, AWS and LTE frequencies, as well as 802.11n Wi-Fi. This compact, feature rich antenna is at home on virtually any watercraft, and is fitted with a stainless steel ferrule and N-connector that are compatible with nearly all Shakespeare 1"-14 threaded mounts. Full Band (698 - 2700 MHz) Broadband2G/3G/4G and WLAN systemsWi-Fi 802.11n compatibleOmni-directional antenna 3-4 dB Gain
#5420Xt Galaxy Little Giant Am/Fm - 5420-Xt - 167-5420Xtf1
Entertainment band. Its sturdy construction and outstanding performance make it an excellent choice for T-tops, hard-tops and other elevated mounting positions. Extra rigid, extra tough. Copper elements, and stainless ferrule with standard 1"-14 thread. Includes 12' RG-62 cable with Motorola type plug installed. Suggested mount: 4187.
#5911 Stowaway Emergency Vhf Antenna - 5911 - 167-5911F1
Emergency VHF flex antenna, loaded 1/4 wave whip. Comes packed in a 12" weather resistant plastic tubing. Complete with 12' cable, connector, and rubber suction cup for fast mounting to any smooth horizontal surface. Flexible vinyl outer covering.
#67 Trailer End W/8' Cable - 50-67-003 - 220-5067003F1
7-way plastic trailer connector molded to heavy duty 7-way cable. Made with self-cleaning contacts and molded to encapsulate terminals and wires to form one weather-tight, non-corrosive assembly. Primary wire gauges within the insulated cable are: Black and White - 10 gauge, Blue - 12 gauge, Brown-Red-Green-Yellow-14 gauge. Molded connector can be used with thermoplastic or metal 7-way car end connectors.
#81S Swivel Mount - 81-S - 167-81Sf1
Chrome-brass base for deck or side mounting. Base is dual joint, free pivoting to allow easy lowering of antenna for clearing overhead obstructions. Standard 1"-14 male threads. Use with stand-off bracket for larger antennas.
#8979 Perf Plus Duct Tape 2 - 56468 - 71-56468F1
This high performance duct tape has a unique construction of high tensile cloth and an aggressive adhesive. Designed for permanent and temporary applications, indoors and out. Sunlight/UV and water resistance allows for clean removal from most opaque surfaces. Resistance allows for clean removal with little or no adhesive residue for up to 6 months.
#8979 Perf Plus Duct Tape 3 - 56469 - 71-56469F1
This high performance duct tape has a unique construction of high tensile cloth and an aggressive adhesive. Designed for permanent and temporary applications, indoors and out. Sunlight/UV and water resistance allows for clean removal from most opaque surfaces. Resistance allows for clean removal with little or no adhesive residue for up to 6 months.
00226Pro Ironwood Pacific Anchorlift Pro Anchor Puller - 002.26Pro - 664-00226Prof1
Designed to make raising your anchor easy. Simply start your engine and motor forward to raise your anchor. Ideal for anchoring in lakes and rivers with anchor lines that are rigged with less than 15 feet of chain. The chain will not thread through the AnchorLift Pro body. Its also an excellent way to easily pull up shrimp or crab pots rigged with nylon or polypropylene line. Machined from high strength aluminum for the heavy duty userSmooth, radiused ends prevent anchor line wearWill raise anchors up to 80lbs using 3/8" to 5/8" anchor lineStainless steel sliding bolt locks anchor at the surfaceIdeal for river and lake anchoringCan be used with crab and shrimp potsLifetime WarrantyMade in the USA
00235 Ironwood Pacific Anchor Ring Anchor Puller, Heavy Duty, 5/16" Stainless Steel Ring - 235 - 664-00235F1
Float your anchor to the surface using the AnchorLift Anchor Ring. Ideal for offshore or bay anchoring where 15 feet or more of anchor chain is used. Stainless steel ring and shackleWill float anchors up to 80 lbs (with buoy)Quickly clips to anchor lineOffered in standard and heavy duty modelsLifetime warranty
02 Sensor - 18-32151 - 47-32151F1
See Sierra's catalog for current application information.
04-14 Ford 1/2 Ton New Body Bell Rv Nods Rvx - Rvr3201 - 839-Rvr3201F1
1 1/2 Europa Brush - 16038112 - 130-16038112F1
Soft badger-style brush. Pure China bristle. Extra fine tip. Hand formed chisel. Black lacquered hardwood peg handle. Epoxy set in stainless steel ferrule. For all types of marine urethanes, varnish, enamels, and bottom paint. For marine and industrial use. Made in USA.
1 1/2 Pipe To Hose Adapter - 0076Dp8Plb - 9-0076Dp8Plbf1
Cast bronze. Meets requirements of USCG safety standards.
1 1/2 Thru Hull Connection - 0350008Dpp - 9-0350008Dppf1
Available in plain or chrome plated bronze, these fittings have a hose barb connection and are recommended for use above the waterline only. The flange is machined to fit the hull tightly and grooved to retain bedding compound. Minimum hull thickness 3/8". NOT TO BE USED IN POTABLE WATER SYSTEMS.
1 1/2 Urethaner Brush - 3052112 - 130-3052112F1
100% White China bristle. Hand formed chisel. Epoxy set in nickel plated, rust resistant ferrules. Solvent resistant molded polyfoam handle. Thick, short, stocky design makes this brush great for production application of marine urethanes. Made in the USA.
1 1/2X1 1/4 Popstop Vanity Dra Bell Rv Rvx - 65Spr1303 - 135-65Spr1303F1
1 1/4 Pipe To Hose Adapter - 0076Dp7Plb - 9-0076Dp7Plbf1
Cast bronze. Meets requirements of USCG safety standards.
1 1/8 Hose Adapter - 905016 - 108-905016F1
Made from high-strength, glass-reinforced Marelon. Perfect choice for joining hose lines to ball valves and seacocks.
1 90 Deg Pipe To Hose Adapte - 0063Dp6Plb - 9-0063Dp6Plbf1
Cast bronze. Meets requirements of USCG safety standards.
1 90 Deg Pipe To Hose Adapter - 0063009Plb - 9-0063009Plbf1
Cast bronze. Meets requirements of USCG safety standards.
1 Bronze 90 Deg Street Ell - 44165 - 38-44165F1
Bronze 90°, male/female threads. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1 Bronze Pipe Cap - 44475 - 38-44475F1
Bronze NOT TO BE USED IN POTABLE WATER SYSTEMS.
1 Bronze Pipe Coupling - 44415 - 38-44415F1
Bronze and imported. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1 Bronze Pipe Tee - 44255 - 38-44255F1
Bronze and imported. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1 Europa Brush - 160381 - 130-160381F1
Soft badger-style brush. Pure China bristle. Extra fine tip. Hand formed chisel. Black lacquered hardwood peg handle. Epoxy set in stainless steel ferrule. For all types of marine urethanes, varnish, enamels, and bottom paint. For marine and industrial use. Made in USA.
1 Foam Brush (50 Per Box) - 92411 - 50-92411F1
Quality, high-density polyurethane foam with wooden handle. For all smooth surfaces. Ideal for the application of enamel, latex, stain, oil paints and varnish. Not forshellac or lacquer. Sold by the box.
1 Pipe To Hose Adapter - 0076Dp6Plb - 9-0076Dp6Plbf1
Cast bronze. Meets requirements of USCG safety standards.
1 Thru Hull Connection Bulk - 0328Dp6 - 9-0328Dp6F1
Molded white plastic with broad flange. For use with hose. Not recommended for use below waterline.
1 Thru Hull Connection Chr - 0350006Dpc - 9-0350006Dpcf1
Available in plain or chrome plated bronze, these fittings have a hose barb connection and are recommended for use above the waterline only. The flange is machined to fit the hull tightly and grooved to retain bedding compound. Minimum hull thickness 3/8".
1 Thru Hull Connection Plb - 0350006Dpp - 9-0350006Dppf1
Available in plain or chrome plated bronze, these fittings have a hose barb connection and are recommended for use above the waterline only. The flange is machined to fit the hull tightly and grooved to retain bedding compound. Minimum hull thickness 3/8".
1 Urethaner Brush - 30521 - 130-30521F1
100% White China bristle. Hand formed chisel. Epoxy set in nickel plated, rust resistant ferrules. Solvent resistant molded polyfoam handle. Thick, short, stocky design makes this brush great for production application of marine urethanes. Made in the USA.
1 X 1/2 Bronze Hex Bushing - 44512 - 38-44512F1
Bronze hex head. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1 X 3 1/2 Brass Pipe Nipple - 40-104 - 38-40104F1
Nipple Brass 1 X 3 1/2 NOT TO BE USED IN POTABLE WATER SYSTEMS.
1 X 3/4 Bronze Hex Bushing - 44513 - 38-44513F1
Bronze hex head. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1 X 3/8 Bronze Hex Bushing - 44511 - 38-44511F1
Bronze hex head. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1 X 60' Black Med. Duty Safety Walk - 7736 - 71-07736F1
Medium DutyAnti-slip tape offers excellent traction enhancement. Used around barefoot or deckshoe areas such as trailers, decks, docks, ladders, stairs and cockpits
1 X 60' White Lt. Duty Safety Walk - 7743 - 71-07743F1
Light DutyFine textured slip resistant polymer, has many uses on and around boats, including trailers, boarding ladders, swim platforms, stairs, showers and cockpits.
1-1/16X6 Ss Piano Hinge Anneal - H14-0116A72 - 236-H140116A72F1
Type-304 Stainless Steel, .040 gauge. Holes are drilled on 2" centers with no stagger. Great for doors, large cabinets and hatches. Available in 6' lengths only. NOTE: A UPS/FedEx overlength/packaging fee may apply to this product.
1-1/2 90 Deg Pipe/Hose Adapte - 0063Dp8Plb - 9-0063Dp8Plbf1
Cast bronze. Meets requirements of USCG safety standards.
1-1/2 Bronze 90 Deg Street Ell - 44167 - 38-44167F1
Bronze 90°, male/female threads. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1-1/2 Bronze Pipe Cap - 44477 - 38-44477F1
Bronze NOT TO BE USED IN POTABLE WATER SYSTEMS.
1-1/2 Bronze Pipe Coupling - 44417 - 38-44417F1
Bronze and imported. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1-1/2 Bronze Pipe Tee - 44257 - 38-44257F1
Bronze and imported. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1-1/2 Heritage Badger Brush - 16055-112 - 130-16055112F1
Soft badger-style brush. Pure China bristle. Unlacquered hardwood peg handle. Epoxy set in stainless steel ferrule. Hand formed chisel to preserve natural soft flagg tips. Extra fine tip. Excellent tipping off brush for Awl-Grip. Made in USA.
1-1/2 R.H. Vac Cuff - 16-147-1120 - 88-1471120F1
Provides added clamping protection for Shields vac hose. For watertight seal apply with sealing compound. SHI 1471120 is heavy-duty.
1-1/2 Sani Hose Black Rubber - 1011124 - 606-1011124F1
For all head and holding tank connections. Extra thick tube and cover especially compounded for maximum resistance to odor permeation and winterizing with antifreeze. Helical wire between 2 ply reinforcement provides excellent flexibility and bend radius. NOT FOR POTABLE WATER. 5 Year Warranty.
1-1/2 Sani Hose White Rubber - 1021124 - 606-1021124F1
For all head and holding tank connections. Extra thick tube and cover especially compounded for maximum resistance to odor permeation and winterizing with antifreeze. Helical wire between 2 ply reinforcement provides excellent flexibility and bend radius. NOT FOR POTABLE WATER. 5 Year Warranty.
1-1/2 Striker Base Flush Mt. - F16-0150-F - 236-F160150Ff1
Features 12 locking positions with hex nut design. Made with Type-316L Stainless Steel. Will fit both port and starboard bases. Welded locking adapter for maximum strength. Removable arms for unobstructed decks. Fits 12' & 15' standard tele-outriggers. 45° gunnel mount base. 3 Year warranty.
1-1/2 Thru Hull Connection - 0328Dp8 - 9-0328Dp8F1
Molded white plastic with broad flange. For use with hose. Not recommended for use below waterline.
1-1/2 Thru Hull Connection C - 0350008Dpc - 9-0350008Dpcf1
Available in plain or chrome plated bronze, these fittings have a hose barb connection and are recommended for use above the waterline only. The flange is machined to fit the hull tightly and grooved to retain bedding compound. Minimum hull thickness 3/8".
1-1/2 X 1 Bronze Hex Bushing - 44523 - 38-44523F1
Bronze hex head. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1-1/2 X 1-1/2 Rem Pin Hinges, 4 Hole #8 Fastener, 1 Pr. - 1293Dp2Chr - 9-1293Dp2Chrf1
Removable Pins.
1-1/2 X 1-1/4 Bronze Hex Bushing - 44524 - 38-44524F1
Bronze hex head. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1-1/2 X 3-1/2 Brass Pipe Nipple - 40144 - 38-40144F1
1-1/2 X 3-1/2 Brass Pipe Nipple NOT TO BE USED IN POTABLE WATER SYSTEMS.
1-1/2 X 3/4 Bronze Hex Bushing - 44522 - 38-44522F1
Bronze hex head. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1-1/2 X-Long Thru Hull-White - Th1502Xlb - 232-Th1502Xlbf1
High Quality UV and Chemical Resistant Virgin PolyproSized to Fit All Marine Hose
1-1/2" 233+ Paint Masking Tape - 26338 - 71-26338F1
Highly conformable tape provides outstanding paint lines.
1-1/2" 3-Way Bronze Diverter Valve - 70-607-10 - 37-7060710F1
Features a chrome plated ball, reinforced TFE seats, stuffing box ring, and adjustable packing gland. Made in U.S.A. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1-1/2" Ball Valve W/ Ss Lever - 70-107-10 - 37-7010710F1
Cast bronze with a stainless steel handle and stem nut. Ball is chrome plated for long lasting corrosion resistance. Reinforced TFE seats and stuffing box ring.Made in U.S.A. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1-1/2" Bronze 45 Degree St Elbow - 44207 - 38-44207F1
1-1/2" Bronze 45 Degree St Elbow NOT TO BE USED IN POTABLE WATER SYSTEMS.
1-1/2" Bronze Seacock Body - 0805008Plb - 9-0805008Plbf1
Ball valve design. Cast bronze. Meets needs of applications that require long, scoop or flush type thru-hulls.
1-1/2" Bronze Seacock W/90° Tail Piece - 0834008Plb - 9-0834008Plbf1
Includes: thru-hull, hose adapter, drain plug, four pre-drilled mounting holes and bonding screw. Incorporates a plastic ball and seat assuring a tight seal and ease of operation and drain plugs for winterizing. Handles are easily removed. Overall height is measured from the top of the hose adapter to the bottom of the flange.
1-1/2" Bronze Seacock W/Straight Tail Piece - 0835008Plb - 9-0835008Plbf1
Includes: thru-hull, hose adapter, drain plug, four pre-drilled mounting holes and bonding screw. Incorporates a plastic ball and seat assuring a tight seal and ease of operation and drain plugs for winterizing. Handles are easily removed. Overall height is measured from the top of the hose adapter to the bottom of the flange.
1-1/2" Chrome Cap Only F/528 - 0528Dp899A - 9-0528Dp899Af1
For the 528 series deck plates. Chrome plated bronze. Comes complete with O-ring.
1-1/2" Chrome Plated Bronze Door Hook - 0956Dp1Chr - 9-0956Dp1Chrf1
Chrome plated cast bronze.
1-1/2" Diesel Pipe Deck Plate - 0528Dpdchr - 9-0528Dpdchrf1
Cast bronze, chrome plated. Comes complete with key, O-ring and retaining cable on cap. The 1-1/4" caps have a slot between holes. Screw size is 8. Use spare key series 1248 and spare O-ring series 513.
1-1/2" Full Flow Ball Valve, Low Profile - 00Bbv150Lp - 379-00Bbv150Lpf1
Bronze, full flow drain & grounding screw. Hard chrome bronze ball and vinyl coated stainless steel handle.
1-1/2" Gas Pipe Deck Plate - 0528Dpgchr - 9-0528Dpgchrf1
Cast bronze, chrome plated. Comes complete with key, O-ring and retaining cable on cap. The 1-1/4" caps have a slot between holes. Screw size is 8. Use spare key series 1248 and spare O-ring series 513.
1-1/2" Intake Water Strainer - 0493008Plb - 9-0493008Plbf1
Cast bronze. Designed for easy installation and cleaning. Features mounting lugs cast into both sides to assure universal mounting, four outside tie rods and a 316 stainless steel strainer basket to minimize electrolysis. Hinged lugs for cast bronze cover permit easy removal and cleaning of basket. Drain plug in bottom casting is provided for easy removal of sediment and draining for winterization. Ratio given for open area to pipe size.
1-1/2" Scoop Thru-Hull W/Nut - Sth-150-W - 34-Sth150Wf1
Includes locking nut. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1-1/2" Shut-Off Full Flow Ball Valve - 77-107-10 - 37-7710710F1
Comes with mounting pads. Use where full flow is required. Bronze body. Chromium plated ball. Reinforced TFE seats & stuffing box ring. Blow out stem design. Stainless steel lever and nut. Meets WW-V-35C Type II. BRZ style type. Made in U.S.A. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1-1/2" Thru-Hull With Nut - Th-150-W - 34-Th150Wf1
Should have threaded portion cut to proper length considering hull and butt block thickness. Consider thread depth when using a seacock. Sealant is recommended between hull and thru-hull flange. Includes nut.NOT TO BE USED IN POTABLE WATER SYSTEMS.
1-1/2" Unmarked Pipe Deck Plt - 0528Dp8Chr - 9-0528Dp8Chrf1
Cast bronze, chrome plated. Comes complete with key, O-ring and retaining cable on cap. The 1-1/4" caps have a slot between holes. Screw size is 8. Use spare key series 1248 and spare O-ring series 513.
1-1/2" Water Pipe Deck Plate - 0528Dpwchr - 9-0528Dpwchrf1
Cast bronze, chrome plated. Comes complete with key, O-ring and retaining cable on cap. The 1-1/4" caps have a slot between holes. Screw size is 8. Use spare key series 1248 and spare O-ring series 513.
1-1/2" White Interior/Exterior Light W/Ss Bezel - 6342Ss7 - 23-6342Ss7F1
These LED lights exceed the output of comparable halogen lights while using 20% of the power. Lights stay cool to the touch and eliminate the burn hazard that halogen lighting can present. Fully potted electronics and stainless steel housing allow for interior and exterior mounting - even underwater! Rated for 50,000+ hours of life. For 12-VDC systems.
1-1/2" Y Valve - 45490-1000 - 6-454901000F1
Designed for installation in waste discharge and bilge pumpout systems. Allows waste to be pumped directly into holding tank or diverted to an overboard discharge fitting. Empty two separate bilge sections with a single pump. All ABS and stainless steel construction. Withstands corrosive waste chemicals and bilge water.
1-1/2" Yachtsman Brush - Z112015 - 391-Z112015F1
White China bristle brush, chisel construction, produces a smooth finish with alkyd and oil-based varnishes, marine paints, stains, and urethanes. Round brass-plated steel ferrule; black solid plastic handle.
1-1/2X1-1/4 Bronze Reduce Couplng - 44450 - 38-44450F1
Bronze and imported. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1-1/2X6 Ss Piano Hinge Pol. - H14-0112P72 - 236-H140112P72F1
Type-304 Stainless Steel, .040 gauge. Holes are drilled on 2" centers with no stagger. Great for doors, large cabinets and hatches. Available in 6' lengths only. NOTE: A UPS/FedEx overlength/packaging fee may apply to this product.
1-1/4 90 Deg Pipe/Hose Adapte - 0063Dp7Plb - 9-0063Dp7Plbf1
Cast bronze. Meets requirements of USCG safety standards.
1-1/4 Bronze 90 Deg Street Ell - 44166 - 38-44166F1
Bronze 90°, male/female threads. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1-1/4 Bronze Pipe Cap - 44476 - 38-44476F1
Bronze NOT TO BE USED IN POTABLE WATER SYSTEMS.
1-1/4 Bronze Pipe Coupling - 44416 - 38-44416F1
Bronze and imported. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1-1/4 Bronze Pipe Tee - 44256 - 38-44256F1
Bronze and imported. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1-1/4 Sink Drain (10300) - 10300 - 390-10300F1
These sink drains fit all Scandvik sinks except 10280 & 10662. Fit a 2-7/16" drain hole opening.1-1/4" Sink Drain:Includes drain, stopper & chain.
1-1/4 X 1 Bronze Hex Bushing - 44518 - 38-44518F1
Bronze hex head. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1-1/4 X 1 Bronze Reduce Coupling - 44446 - 38-44446F1
Bronze and imported. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1-1/4 X 3/4 Bronze Hex Bushing - 44517 - 38-44517F1
Bronze hex head. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1-1/4 X 5 Brass Pipe Nipple - 40127 - 38-40127F1
1-1/4 X 5 Brass Pipe Nipple NOT TO BE USED IN POTABLE WATER SYSTEMS.
1-1/4" Ball Valve W/ Ss Lever - 70-106-10 - 37-7010610F1
Cast bronze with a stainless steel handle and stem nut. Ball is chrome plated for long lasting corrosion resistance. Reinforced TFE seats and stuffing box ring.Made in U.S.A. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1-1/4" Bronze 45 Degree Street Elbow - 44206 - 38-44206F1
1-1/4" Bronze 45 Degree Street Elbow NOT TO BE USED IN POTABLE WATER SYSTEMS.
1-1/4" Bronze Full Flow In-Line Ball Valve - Ibv-1250 Bspp - 34-Ibv1250Bsppf1
Patented field reversible handle allows you to select the closed position orientation (clockwise or counterclockwise) that best suits the installation. Handle has square hole to accept standard ratchet, to help reach valves in hard-to-reach locations and ease actuation of difficult to operate valves. 400 WOG rated. Stainless steel handle and hardware. Chrome plated solid brass ball (not a hollow ball). PTFE seats and seals. UL Listed for fuel or water.NOT TO BE USED IN POTABLE WATER SYSTEMS.
1-1/4" Bronze Seacock Body - 0805007Plb - 9-0805007Plbf1
Ball valve design. Cast bronze. Meets needs of applications that require long, scoop or flush type thru-hulls.
1-1/4" Bronze Seacock W/90° Tail Piece - 0834007Plb - 9-0834007Plbf1
Includes: thru-hull, hose adapter, drain plug, four pre-drilled mounting holes and bonding screw. Incorporates a plastic ball and seat assuring a tight seal and ease of operation and drain plugs for winterizing. Handles are easily removed. Overall height is measured from the top of the hose adapter to the bottom of the flange.
1-1/4" Full Flow Ball Valve, Low Profile - 00Bbv125Lp - 379-00Bbv125Lpf1
Bronze, full flow drain & grounding screw. Hard chrome bronze ball and vinyl coated stainless steel handle.
1-1/4" Intake Water Strainer - 0493007Plb - 9-0493007Plbf1
Cast bronze. Designed for easy installation and cleaning. Features mounting lugs cast into both sides to assure universal mounting, four outside tie rods and a 316 stainless steel strainer basket to minimize electrolysis. Hinged lugs for cast bronze cover permit easy removal and cleaning of basket. Drain plug in bottom casting is provided for easy removal of sediment and draining for winterization. Ratio given for open area to pipe size.
1-1/4" Scoop Thru Hull W/Nut - 0065Dp7Plb - 9-0065Dp7Plbf1
Cast bronze. Screw size is #8. Strainer is 3" x 4", except for 65DP7PLB which is 3-1/4" x 4-1/4". Includes nut. UL Listed. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1-1/4" Shaft Anode Ext Heavy, Zinc - Cmx05A - 194-Cmx05Af1
Streamlined Shaft Anodes w/Allen Screw
1-1/4" Shaft Anode, Zinc - Cmx05 - 194-Cmx05F1
Streamlined Shaft Anodes w/Allen Screw
1-1/4" Shut-Off Full Flow Ball Valve - 77-106-10 - 37-7710610F1
Comes with mounting pads. Use where full flow is required. Bronze body. Chromium plated ball. Reinforced TFE seats & stuffing box ring. Blow out stem design. Stainless steel lever and nut. Meets WW-V-35C Type II. BRZ style type. Made in U.S.A. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1-1/4" Strainer 304 Ss Basket - Arg-1250-S Bspp - 34-Arg1250Sbsppf1
Standard single strainers. No tie rods or leaks under pressure or vacuum. Quick and easy mounting system allowing removal of strainer without tools. #304 Stainless steel filter basket. O-ring seals at strainer cap and between strainer head and sight glass. See-thru screw-on strainer cap allows easy, no-tools maintenance. Spanner wrench holes in cover allow the use of SW-2531 wrench. Install with pipe or hose. Do not use chemical or abrasive cleaners on sight glass. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1-1/4" Thru-Hull With Nut - Th-125-W - 34-Th125Wf1
Should have threaded portion cut to proper length considering hull and butt block thickness. Consider thread depth when using a seacock. Sealant is recommended between hull and thru-hull flange. Includes nut.NOT TO BE USED IN POTABLE WATER SYSTEMS.
1-1/4"Bronze Seacock W/Straight Tail Piece - 0835007Plb - 9-0835007Plbf1
Includes: thru-hull, hose adapter, drain plug, four pre-drilled mounting holes and bonding screw. Incorporates a plastic ball and seat assuring a tight seal and ease of operation and drain plugs for winterizing. Handles are easily removed. Overall height is measured from the top of the hose adapter to the bottom of the flange.
1-1/4X3/4 Bronze Reduce Coupling - 44445 - 38-44445F1
Bronze and imported. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1-1/4X6 Ss Piano Hinge Polish. - H14-0114P72 - 236-H140114P72F1
Type-304 Stainless Steel, .040 gauge. Holes are drilled on 2" centers with no stagger. Great for doors, large cabinets and hatches. Available in 6' lengths only. NOTE: A UPS/FedEx overlength/packaging fee may apply to this product.
1-1/8 Chr Thru-Hull F/Hose - 035006Adpc - 9-035006Adpcf1
Available in plain or chrome plated bronze, these fittings have a hose barb connection and are recommended for use above the waterline only. The flange is machined to fit the hull tightly and grooved to retain bedding compound. Minimum hull thickness 3/8".
1-1/8 Striker Base Flush Mt. - F16-0212-F - 236-F160212Ff1
Features 12 locking positions with hex nut design. Made with Type-316L Stainless Steel. Will fit both port and starboard bases. Welded locking adapter for maximum strength. Removable arms for unobstructed decks. Fits 12' & 15' standard tele-outriggers. 45° gunnel mount base. 3 Year warranty.
1-1/8 Thru Hull Connect Bulk - 0328Dp6A - 9-0328Dp6Af1
Molded white plastic with broad flange. For use with hose. Not recommended for use below waterline.
1-1/8" Shaft Anode, Zinc - Cmx04 - 194-Cmx04F1
Streamlined Shaft Anodes w/Allen Screw
1-1/8" White Plastic Thru-Hull W/Broad Flange - 18090 - 50-18090F1
Molded plastic with broad flange. Per ABYC "Safety Standards for Small Craft". Not recommended for use below the waterline.
1-3/8 Bearings Bulk Pk/10 - 81160 - 641-81160F1
Sized to fit all popular trailers.
1-3/8 X 1-7/8 X 5-1/2 Brass Cutless Bearing - Devilfish - 87-Devilfishf1
Pollution-Free Naval Brass Marine BearingsBrass sleeve with rubber oil resistant shaft. The clean bearing that cushions the shaft, installs in minutes and lasts for yearsMorse Bearings are engineered to meet the toughest service requirements in corrosive and abrasive marine or industrial applications. The fluted rubber bearings surface will outlast hard surface bearings by more than 10 times. All materials meet U.S. Navy specs MIL-B-17901A CLII. Bearing Selection: Normal design practice is to select a bearing with a length equal to 4 times the shaft diameter.It may be acceptable to deviate from this rule when application load requirements permit the use of shorter bearing lengths. * Slimline Bearing. Bearing area is: Bearing I.D. (shaft diameter) multiply x bearing length. Loading capability is determined by: Multiplying that bearing area x 35 psi. Example: (RAY)- 3" shaft dia. x 12" length 36 sq." bearing area x 35 psi 1,260 lbs. Is bearing load capacity
1.5 Mil Clear Plastic Sheeting - Cf01512200C - 28-Cf01512200Cf1
Use for paint protection, vapor barrier, moisture barrier and insulation.
1.5 Mil Clear Plastic Sheeting - Cf01520200C - 28-Cf01520200Cf1
Use for paint protection, vapor barrier, moisture barrier and insulation.
1.5" Ace Brush - 12021 - 321-12021F1
Good quality brushes. Square trim, solid black plastic handle and 100% Black China bristle.
1.5" Badger Brush - 10021 - 321-10021F1
Premium quality. Hand formed chisel edge. Cup chisel trim, natural stock and pencil style, clear wood handle.
1.5" Ball Quick Release Kayak Track Base - Rap-383U - 170-Rap383Uf1
For the serious kayak angler, the RAM Quick Release Track Base is a universal mounting solution for a wide variety of kayak products including RAM fishing rod holders, camera and transducer deployment arms. Designed to accommodate all kayak tracks, as well as common track systems, engage and fasten the base to your existing track system or many other's including GearTrac, SlideTrax and the common T-Track. With a quick turn of the ball the base will slide along the track, giving you ultimate flexibility in repositioning your rod holder. A necessity for all fishing enthusiasts, the RAM Quick Release Track Base is certain to create more mounting options on whatever you choose to take to the water. Track Dimensional Range: .250" MIN. - .562" MAX. High strength composite. Quick release and installationEasily relocate adapter along track, can be installed at any point on the trackHigh strength materials ensure product longevityCompatible with RAM-ROD™ holders with 1.5" ball and any 1.5" RAM accessoryLifetime warranty
1.5" Fooler Brush @36 - 10015 - 321-10015F1
100% natural bristle. Double the thickness and holds more coating of a typical chip brush. Square trim, wood handle. Recommended for epoxy and polyester resins, bottom paint, industrial coating, but not for fine finishes.Sold in Full Boxes Only.
1.5" Onyx Brush - 12023 - 321-12023F1
A better quality with chisel trim, painted foam black handle and 100% white china bristle.
1.77" Snap-Lock™ Adjustable Power Pedestal - 39204 - 148-39204F1
Integral seat mount1.77" diameter postClear anodized aluminum finish
1.77" Snap-Lock™ Seat Mount, Bulk - 19000 - 148-19000F1
Snaps into posts and locks for added securityE-coated for superior corrosion-resistance3° Tilt
1" & 1-1/2" Inline Non-Return Valve - Lv1215 - 698-Lv1215F1
Simple way to maintain prime in a suction or discharge line. Designed to fit in-line. Use with manual or electric pumps.
1" & 1-1/8" Inline Non-Return Valve - Lv1218 - 698-Lv1218F1
Simple way to maintain prime in a suction or discharge line. Designed to fit in-line. Use with manual or electric pumps.
1" 233+ Paint Masking Tape - 26336 - 71-26336F1
Highly conformable tape provides outstanding paint lines.
1" 3-Way Bronze Diverter Valve - 70-605-10 - 37-7060510F1
Features a chrome plated ball, reinforced TFE seats, stuffing box ring, and adjustable packing gland. Made in U.S.A. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1" Ace Brush - 12011 - 321-12011F1
Good quality brushes. Square trim, solid black plastic handle and 100% Black China bristle.
1" Badger Brush - 10011 - 321-10011F1
Premium quality. Hand formed chisel edge. Cup chisel trim, natural stock and pencil style, clear wood handle.
1" Ball Valve W/ Ss Lever - 70-105-10 - 37-7010510F1
Cast bronze with a stainless steel handle and stem nut. Ball is chrome plated for long lasting corrosion resistance. Reinforced TFE seats and stuffing box ring.Made in U.S.A. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1" Bronze 45 Degree Street Elbow - 44205 - 38-44205F1
1" Bronze 45 Degree Street Elbow NOT TO BE USED IN POTABLE WATER SYSTEMS.
1" Bronze Full Flow In-Line Ball Valve - Ibv-1000 Bspp - 34-Ibv1000Bsppf1
Patented field reversible handle allows you to select the closed position orientation (clockwise or counterclockwise) that best suits the installation. Handle has square hole to accept standard ratchet, to help reach valves in hard-to-reach locations and ease actuation of difficult to operate valves. 400 WOG rated. Stainless steel handle and hardware. Chrome plated solid brass ball (not a hollow ball). PTFE seats and seals. UL Listed for fuel or water.NOT TO BE USED IN POTABLE WATER SYSTEMS.
1" Bronze Seacock Body - 0805006Plb - 9-0805006Plbf1
Ball valve design. Cast bronze. Meets needs of applications that require long, scoop or flush type thru-hulls.
1" Bronze Seacock W/90° Tail Piece - 0834006Plb - 9-0834006Plbf1
Includes: thru-hull, hose adapter, drain plug, four pre-drilled mounting holes and bonding screw. Incorporates a plastic ball and seat assuring a tight seal and ease of operation and drain plugs for winterizing. Handles are easily removed. Overall height is measured from the top of the hose adapter to the bottom of the flange. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1" Fooler Brush @ 36 - 10001 - 321-10001F1
100% natural bristle. Double the thickness and holds more coating of a typical chip brush. Square trim, wood handle. Recommended for epoxy and polyester resins, bottom paint, industrial coating, but not for fine finishes.Sold in Full Boxes Only.
1" Full Flow Ball Valve, Low Profile - 00Bbv100Lp - 379-00Bbv100Lpf1
Bronze, full flow drain & grounding screw. Hard chrome bronze ball and vinyl coated stainless steel handle.
1" Heritage Badger Brush - 16055-1 - 130-160551F1
Soft badger-style brush. Pure China bristle. Unlacquered hardwood peg handle. Epoxy set in stainless steel ferrule. Hand formed chisel to preserve natural soft flagg tips. Extra fine tip. Excellent tipping off brush for Awl-Grip. Made in USA.
1" Intake Water Strainer - 0493006Plb - 9-0493006Plbf1
Cast bronze. Designed for easy installation and cleaning. Features mounting lugs cast into both sides to assure universal mounting, four outside tie rods and a 316 stainless steel strainer basket to minimize electrolysis. Hinged lugs for cast bronze cover permit easy removal and cleaning of basket. Drain plug in bottom casting is provided for easy removal of sediment and draining for winterization. Ratio given for open area to pipe size.
1" Onyx Brush - 12013 - 321-12013F1
A better quality with chisel trim, painted foam black handle and 100% white china bristle.
1" S.S. Tubing - S14-1049P12 - 236-S141049P12F1
Type-304 marine-grade steel, polished and buffed.
1" S.S. Tubing - S14-1049P6-1 - 236-S141049P61F1
Type-304 marine-grade steel, polished and buffed.
1" Scoop Thru Hull W/Nut - 0065Dp6Plb - 9-0065Dp6Plbf1
Cast bronze. Screw size is #8. Strainer is 3" x 4", except for 65DP7PLB which is 3-1/4" x 4-1/4". Includes nut. UL Listed. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1" Scoop Thru-Hull W/Nut - Sth-100-W - 34-Sth100Wf1
Includes locking nut. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1" Shaft Anode, Zinc - Cmx03 - 194-Cmx03F1
Streamlined Shaft Anodes w/Allen Screw
1" Shut-Off Full Flow Ball Valve - 77-105-10 - 37-7710510F1
Comes with mounting pads. Use where full flow is required. Bronze body. Chromium plated ball. Reinforced TFE seats & stuffing box ring. Blow out stem design. Stainless steel lever and nut. Meets WW-V-35C Type II. BRZ style type. Made in U.S.A. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1" Strainer 304 Ss Basket - Arg-1000-S Bspp - 34-Arg1000Sbsppf1
Standard single strainers. No tie rods or leaks under pressure or vacuum. Quick and easy mounting system allowing removal of strainer without tools. #304 Stainless steel filter basket. O-ring seals at strainer cap and between strainer head and sight glass. See-thru screw-on strainer cap allows easy, no-tools maintenance. Spanner wrench holes in cover allow the use of SW-2531 wrench. Install with pipe or hose. Do not use chemical or abrasive cleaners on sight glass. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1" Thru-Hull With Nut - Th-100-W - 34-Th100Wf1
Should have threaded portion cut to proper length considering hull and butt block thickness. Consider thread depth when using a seacock. Sealant is recommended between hull and thru-hull flange. Includes nut.NOT TO BE USED IN POTABLE WATER SYSTEMS.
1" X 60' Black Heavy Duty Safety Walk - 7100029620 - 71-Sw1F1
Heavy Duty - Anti-slip tape has a diamond hard mineral surface for extra traction. It is designed for use around areas of heavy traffic.
1" X 60' Gray Med. Duty Safety Walk - 7000051950 - 71-Sw1Grf1
Medium DutyAnti-slip tape offers excellent traction enhancement. Used around barefoot or deckshoe areas such as trailers, decks, docks, ladders, stairs and cockpits
1" X50Yd Utility Cloth P150 - 5111519789 - 71-19789F1
314DAn aluminum oxide abrasive product sheet. 1" wide constructed on a J weight, durable cloth backing. Primary market: metalworking.
1" X50Yd Utility Cloth P320 - 5111519784 - 71-19784F1
314DAn aluminum oxide abrasive product sheet. 1" wide constructed on a J weight, durable cloth backing. Primary market: metalworking.
1" X50Yd Utility Cloth P400 - 5111519783 - 71-19783F1
314DAn aluminum oxide abrasive product sheet. 1" wide constructed on a J weight, durable cloth backing. Primary market: metalworking.
1" X50Yd Utility Cloth P80 - 5111519792 - 71-19792F1
314DAn aluminum oxide abrasive product sheet. 1" wide constructed on a J weight, durable cloth backing. Primary market: metalworking.
1" Yachtsman Brush - Z112010 - 391-Z112010F1
White China bristle brush, chisel construction, produces a smooth finish with alkyd and oil-based varnishes, marine paints, stains, and urethanes. Round brass-plated steel ferrule; black solid plastic handle.
1"Bronze Seacock W/Straight Tail Piece - 0835006Plb - 9-0835006Plbf1
Includes: thru-hull, hose adapter, drain plug, four pre-drilled mounting holes and bonding screw. Incorporates a plastic ball and seat assuring a tight seal and ease of operation and drain plugs for winterizing. Handles are easily removed. Overall height is measured from the top of the hose adapter to the bottom of the flange.
1/2 Black Grommets (5) - 760500 - 639-760500F1
Flexible Black VinylProvides instant abrasion resistance to wires passing through panel holes.
1/2 Brass Sq Head Pipe Plug - 28087 - 38-28087F1
Imported. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1/2 Bronze 90 Deg Street Ell - 44163 - 38-44163F1
Bronze 90°, male/female threads. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1/2 Bronze Pipe Cap - 44473 - 38-44473F1
Bronze NOT TO BE USED IN POTABLE WATER SYSTEMS.
1/2 Bronze Pipe Coupling - 44413 - 38-44413F1
Bronze and imported. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1/2 Bronze Pipe Tee - 44253 - 38-44253F1
Bronze and imported. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1/2 Facepiece, Ultimate Reusable, Lg. - 37083 - 71-37083F1
Advance silicone material for increased comfort and greater durability Proprietary 3M™ CoolFlow™ valve helps makes breathing easierDual-mode head harness adjusts easily for either standard or drop-down modeExhalation valve cover directs exhaled breath and moisture downward to reduce fogging
1/2 Facepiece, Ultimate Reusable, Lg. - 7100134949 - 71-7503F1
Advance silicone material for increased comfort and greater durability Proprietary 3M™ CoolFlow™ valve helps makes breathing easierDual-mode head harness adjusts easily for either standard or drop-down modeExhalation valve cover directs exhaled breath and moisture downward to reduce fogging
1/2 Facepiece, Ultimate Reusable, Med. - 37082 - 71-37082F1
Advance silicone material for increased comfort and greater durability Proprietary 3M™ CoolFlow™ valve helps makes breathing easierDual-mode head harness adjusts easily for either standard or drop-down modeExhalation valve cover directs exhaled breath and moisture downward to reduce fogging
1/2 Glue Brushes (12/Pk) - 803-12 - 655-80312F1
A handy disposable brush with a 6" metal handle. Used for a wide variety of gluing and coating.
1/2 Glue Brushes (144/Box) - 803-144 - 655-803144F1
A handy disposable brush with a 6" metal handle. Used for a wide variety of gluing and coating.
1/2 In Shackle Anchor Galv Replaces P/N 284-Mc6650G - Mc650G - 284-Mc650Gf1
1/2 Pipe To Hose Adapter - 0076Dp4Plb - 9-0076Dp4Plbf1
Cast bronze. Meets requirements of USCG safety standards.
1/2 Plastic Cable Strap 10/B - 0196Dp5 - 9-0196Dp5F1
Black plastic that is ultra-violet stabilized for weather resistance. Eliminates need for insulating cushion. Width is 1/2". Conforms to USCG standards. 10 Per Card.
1/2 Thru Hull Connection - 0328Dp4 - 9-0328Dp4F1
Molded white plastic with broad flange. For use with hose. Not recommended for use below waterline.
1/2 X 1/4 Bronze Hex Bushing - 44504 - 38-44504F1
Bronze hex head. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1/2 X 1/8 Bronze Hex Bushing - 44503 - 38-44503F1
Bronze hex head. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1/2 X 150' Nylon W/1/4 X 10' - 69000332 - 239-69000332F1
Designed specifically for top performance with all Lewmar V series and Pro series windlasses. They feature ACCO hi-test, hot-dipped galvanized chain and 3-strand nylon twist rope that is chemically treated to remain flexible after constant exposure to salt water and sun. A special tapered splice allows smooth transition from rope to chain
1/2 X 1500' Strap-Cross Woven - Pd40Tcw - 315-Pd40Tcwf1
Used with uprights and buckles to form the support structure under shrinkwrap covers.
1/2 X 3 1/2 Brass Pipe Nipple - 40-065 - 38-40065F1
Nipple Brass 1/2 X 3 1/2 NOT TO BE USED IN POTABLE WATER SYSTEMS.
1/2 X 3/8 Bronze Hex Bushing - 44505 - 38-44505F1
Bronze hex head. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1/2 X 3900' Strap Cross Woven - Pd50Tcw - 315-Pd50Tcwf1
Used with uprights and buckles to form the support structure under shrinkwrap covers.
1/2 X200'Nylon W/1/4 X 15' - 69000334 - 239-69000334F1
Designed specifically for top performance with all Lewmar V series and Pro series windlasses. They feature ACCO hi-test, hot-dipped galvanized chain and 3-strand nylon twist rope that is chemically treated to remain flexible after constant exposure to salt water and sun. A special tapered splice allows smooth transition from rope to chain
1/2" 233+ Paint Masking Tape - 26332 - 71-26332F1
Highly conformable tape provides outstanding paint lines.
1/2" 3-Way Bronze Diverter Valve - 70-603-10 - 37-7060310F1
Features a chrome plated ball, reinforced TFE seats, stuffing box ring, and adjustable packing gland. Made in U.S.A. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1/2" Ball Valve W/ Ss Lever - 70-103-10 - 37-7010310F1
Cast bronze with a stainless steel handle and stem nut. Ball is chrome plated for long lasting corrosion resistance. Reinforced TFE seats and stuffing box ring.Made in U.S.A. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1/2" Brass Hose Splicer - 32096 - 38-32096F1
1/2" Brass Hose Splicer NOT TO BE USED IN POTABLE WATER SYSTEMS.
1/2" Bronze 45 Degree Street Elbow - 44203 - 38-44203F1
1/2" Bronze 45 Degree Street Elbow NOT TO BE USED IN POTABLE WATER SYSTEMS.
1/2" Full Flow Ball Valve, Low Profile - 00Bbv50Lp - 379-00Bbv50Lpf1
Bronze, full flow drain & grounding screw. Hard chrome bronze ball and vinyl coated stainless steel handle.
1/2" Hose X 1/2 Pipe Male Hose Barb - 32017 - 38-32017F1
Temperature and working pressure ranges - From -400F to +1600F at 150 PSI maximum. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1/2" Hose X 1/4 Pipe Male Hose Barb - 32015 - 38-32015F1
Temperature and working pressure ranges - From -400F to +1600F at 150 PSI maximum. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1/2" Hose X 3/4 Pipe Male Hose Barb - 32018 - 38-32018F1
Temperature and working pressure ranges - From -400F to +1600F at 150 PSI maximum. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1/2" Hose X 3/8 Pipe Male Hose Barb - 32016 - 38-32016F1
Temperature and working pressure ranges - From -400F to +1600F at 150 PSI maximum. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1/2" Intake Water Strainer - 0493004Plb - 9-0493004Plbf1
Cast bronze. Designed for easy installation and cleaning. Features mounting lugs cast into both sides to assure universal mounting, four outside tie rods and a 316 stainless steel strainer basket to minimize electrolysis. Hinged lugs for cast bronze cover permit easy removal and cleaning of basket. Drain plug in bottom casting is provided for easy removal of sediment and draining for winterization. Ratio given for open area to pipe size.
1/2" Metal Buckles (100/Bag) - Pacb412 - 315-Pacb412F1
For use with strapping and tensioning tool.
1/2" Scoop Thru Hull W/Nut - 0065Dp4Plb - 9-0065Dp4Plbf1
Cast bronze. Screw size is #8. Strainer is 3" x 4", except for 65DP7PLB which is 3-1/4" x 4-1/4". Includes nut. UL Listed. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1/2" Shaft Anode, Zinc - Cmx00 - 194-Cmx00F1
Streamlined Shaft Anodes w/Allen Screw
1/2" Shut-Off Full Flow Ball Valve - 77-103-10 - 37-7710310F1
Comes with mounting pads. Use where full flow is required. Bronze body. Chromium plated ball. Reinforced TFE seats & stuffing box ring. Blow out stem design. Stainless steel lever and nut. Meets WW-V-35C Type II. BRZ style type. Made in U.S.A. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1/2" Stainless Steel Bow Shackle, Carded - 147012-1 - 354-1470121F1
Constructed of investment cast 316 stainless the D style shackle has straight sides with a U-shape rounded bottom. Designed for rigging applications with bidirectional loads. The U-shaped end can handle heavy loads, loads on the straight sides, however, may cause bending. We do not load rate cast shackles.
1/2" White Plastic Thru-Hull W/Broad Flange - 50-18011 - 50-18011F1
Molded plastic with broad flange. Per ABYC "Safety Standards for Small Craft". Not recommended for use below the waterline.
1/2" X 12" X 27" Black Starboard - P10-5012Blk27-1 - 236-P105012Blk271F1
UV-Stabilized marine grade polymer. UV resistant. Withstands extreme weather conditions. Will not rot, delaminate, swell or splinter. The matte texture requires no painting, finishing, or maintenance. It will last the lifetime of your boat. Pre-cut and packaged with do-it-yourself project ideas. Easy to work with using standard woodworking tools. 1 Year warranty.
1/2" X 12" X 27" White Starboarde - P10-5012Wha27-1 - 236-P105012Wha271F1
UV-Stabilized marine grade polymer. UV resistant. Withstands extreme weather conditions. Will not rot, delaminate, swell or splinter. The matte texture requires no painting, finishing, or maintenance. It will last the lifetime of your boat. Pre-cut and packaged with do-it-yourself project ideas. Easy to work with using standard woodworking tools. 1 Year warranty.
1/2" X 200' 8-Plait Performance Anchor Rode - Hm10Ht200Px - 239-Hm10Ht200Pxf1
8-Plait rode allows you to fit 30% more line in the anchor locker than with standard 3-strand rope rode. Eliminates all kockling and kinking, reducing the risk of jamming in the windlass gypsy and resists stiffening with age.
1/2" X 200' Long Link Galvanized Mooring Chain, Drum - 500140850 - 251-500140850F1
A low carbon steel, general purpose chain with a versatile long link design. The long link makes it more flexible and ideally suited for mooring applications. 40% stronger than Acco's original chain products. The long link construction allows the hook-up of shackles anywhere on the chain, not just on the end links. Chain is continuously hot-dipped galvanized to provide a deep, strong protective coating.
1/2" X 200' Long Link Self-Colored Mooring Chain, Drum - 8611647 - 251-8611647F1
A low carbon steel, general purpose chain with a versatile long link design. The long link makes it more flexible and ideally suited for mooring applications. 40% stronger than Acco's original chain products. The long link construction allows the hook-up of shackles anywhere on the chain, not just on the end links.
1/2" X 24" X 27" Black Starboard - P10-5024Blk27-1 - 236-P105024Blk271F1
UV-Stabilized marine grade polymer. UV resistant. Withstands extreme weather conditions. Will not rot, delaminate, swell or splinter. The matte texture requires no painting, finishing, or maintenance. It will last the lifetime of your boat. Pre-cut and packaged with do-it-yourself project ideas. Easy to work with using standard woodworking tools. 1 Year warranty.
1/2" X 24" X 27" White Starboard - P10-5024Wha27-1 - 236-P105024Wha271F1
UV-Stabilized marine grade polymer. UV resistant. Withstands extreme weather conditions. Will not rot, delaminate, swell or splinter. The matte texture requires no painting, finishing, or maintenance. It will last the lifetime of your boat. Pre-cut and packaged with do-it-yourself project ideas. Easy to work with using standard woodworking tools. 1 Year warranty.
1/2" X 24" X 54" Black Starboard - P10-5024Blk54-1 - 236-P105024Blk541F1
UV-Stabilized marine grade polymer. UV resistant. Withstands extreme weather conditions. Will not rot, delaminate, swell or splinter. The matte texture requires no painting, finishing, or maintenance. It will last the lifetime of your boat. Pre-cut and packaged with do-it-yourself project ideas. Easy to work with using standard woodworking tools. 1 Year warranty.
1/2" X 24" X 54" White Starboar - P10-5024Wha54-1 - 236-P105024Wha541F1
UV-Stabilized marine grade polymer. UV resistant. Withstands extreme weather conditions. Will not rot, delaminate, swell or splinter. The matte texture requires no painting, finishing, or maintenance. It will last the lifetime of your boat. Pre-cut and packaged with do-it-yourself project ideas. Easy to work with using standard woodworking tools. 1 Year warranty.
1/2" X 300' 8-Plait Performance Anchor Rode - Hm15Ht300Px - 239-Hm15Ht300Pxf1
8-Plait rode allows you to fit 30% more line in the anchor locker than with standard 3-strand rope rode. Eliminates all kockling and kinking, reducing the risk of jamming in the windlass gypsy and resists stiffening with age.
1/2In Dia. D-Ring For Tie Down Strong & Reliable Ram - Dr-12B - 656-Dr12Bf1
1/2X1/4 Bronze Reducing Coupling - 44434 - 38-44434F1
Bronze and imported. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1/2X3/8 Bronze Reducing Coupling - 44435 - 38-44435F1
Bronze and imported. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1/4 B Solenoid + Fitting 12V - 130077082Kit - 606-130077082Kitf1
Low pressure brass LPG solenoid shut-off valve. Will not open with high pressure and will close with no or low electric current. Draws 790 mA when in use. CE certified. Comes with 2 brass connection fittings for ease of installation.
1/4 Brass Sq Head Pipe Plug - 28085 - 38-28085F1
Imported. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1/4 Bronze 90 Deg Street Ell - 44161 - 38-44161F1
Bronze 90°, male/female threads. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1/4 Bronze Pipe Cap - 44471 - 38-44471F1
Bronze NOT TO BE USED IN POTABLE WATER SYSTEMS.
1/4 Bronze Pipe Coupling - 44411 - 38-44411F1
Bronze and imported. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1/4 Bronze Pipe Tee - 44251 - 38-44251F1
Bronze and imported. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1/4 In Shackle Anchor Galv Replaces P/N 284-Mc6646G - Mc646G - 284-Mc646Gf1
1/4 Plastic Cable Strap 10/B - 0196Dp2 - 9-0196Dp2F1
Black plastic that is ultra-violet stabilized for weather resistance. Eliminates need for insulating cushion. Width is 1/2". Conforms to USCG standards. 10 Per Card.
1/4 Pt All Purp Cement Clear Bell Rv Rvx - 7530818 - 135-7530818F1
1/4 Quick Disc W/1/4In Ball Va Bell Rv Rvx - 10104052 - 135-10104052F1
1/4 X 1/8 Bronze Hex Bushing - 28102 - 38-28102F1
Bronze hex head. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1/4 X 25' Flex Trim Black - V30-1008B25-1 - 236-V301008B251F1
Used to cap any raw edge fiberglass, metal, glass or plexiglas. Easy to install, internal aluminum clips secure trim.
1/4 X 25' Flex Trim White - V30-1008W25-1 - 236-V301008W251F1
Used to cap any raw edge fiberglass, metal, glass or plexiglas. Easy to install, internal aluminum clips secure trim.
1/4 X 3/4 X 8' Hatch Tape - V30-0748B8-2 - 236-V300748B82F1
Medium density closed cell foam with self adhesive for convenient installation. Provides anti-rattle seal.
1/4-20X 2 Ss P/H M/S Phillipsp 100/Bx Pmg - 5114-316 - 828-14X2P13Msf1
1/4" 233+ Paint Masking Tape - 7000048806 - 71-26344F1
Highly conformable tape provides outstanding paint lines.
1/4" Ball Valve W/ Ss Lever - 70-101-10 - 37-7010110F1
Cast bronze with a stainless steel handle and stem nut. Ball is chrome plated for long lasting corrosion resistance. Reinforced TFE seats and stuffing box ring.Made in U.S.A. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1/4" Brass Hose Splicer - 32093 - 38-32093F1
1/4" Brass Hose Splicer NOT TO BE USED IN POTABLE WATER SYSTEMS.
1/4" Bronze 45 Degree Street Elbow - 44-201 - 38-44201F1
1/4" Bronze 45 Degree Street Elbow NOT TO BE USED IN POTABLE WATER SYSTEMS.
1/4" Cable Clamps, Natural 6 Pcs. - 401251 - 639-401251F1
Marine Grade® Nylon Cable Clamp. Pure nylon for maximum stregth and resistance to solvents, oils, acids and moisture. Unique screw hole alignment feature to speed installation. Absorbs shock and vibration, reduces unwanted noise.
1/4" Galvanized Anchor Shackles, 50 Pieces - 147806-5 - 354-1478065F1
Galvanized anchor shackles in a counter top display.
1/4" Hose X 1/4 Pipe Male Hose Barb - 32005 - 38-32005F1
Temperature and working pressure ranges - From -400F to +1600F at 150 PSI maximum. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1/4" Hose X 1/8 Pipe Male Hose Barb - 32004 - 38-32004F1
Temperature and working pressure ranges - From -400F to +1600F at 150 PSI maximum. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1/4" Hose X 3/8 Pipe Male Hose Barb - 32006 - 38-32006F1
Temperature and working pressure ranges - From -400F to +1600F at 150 PSI maximum. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1/4" Npt X 3/8" Alum Hose Ba - 033442-10 - 114-03344210F1
Allows customers to customize their fuel line assemblies to match existing connectors on their fuel tanks! All fittings are built to OEM specifications for replacement parts and use o-ring construction for tight, leak-free connections.
1/4" Nylon Shock Cord Clip, Black, Bulk - 652061 - 354-652061F1
Shock Cord Clips can be used with bulk shock cords to create custom tie-down lengths. UV stabilized injection molded nylon construction.
1/4" Nylon Shock Cord Clip, White, Pair - 652060-1 - 354-6520601F1
Shock Cord Clips can be used with bulk shock cords to create custom tie-down lengths. UV stabilized injection molded nylon construction.
1/4" Shut-Off Full Flow Ball Valve - 77-101-10 - 37-7710110F1
Comes with mounting pads. Use where full flow is required. Bronze body. Chromium plated ball. Reinforced TFE seats & stuffing box ring. Blow out stem design. Stainless steel lever and nut. Meets WW-V-35C Type II. BRZ style type. Made in U.S.A. NOT TO BE USED IN POTABLE WATER SYSTEMS.
1/4" Stainless Shock Cord Clip W/Crimp, Pair - 657066-1 - 354-6570661F1
Shock Cord Hooks & Crimps can be used with bulk shock cords to create custom tie-down lengths. Corrosion resistant formed 304 stainless steel construction.
1/4" Stainless Steel Bow Shackle, Carded - 147006-1 - 354-1470061F1
Constructed of investment cast 316 stainless the D style shackle has straight sides with a U-shape rounded bottom. Designed for rigging applications with bidirectional loads. The U-shaped end can handle heavy loads, loads on the straight sides, however, may cause bending. We do not load rate cast shackles.
1/4" X 1/2" Pivot 40 Series - 36361 - 1-036361F1
Pivot for 4300 series cables
1/4" X 12" X 12" White Starboard - P10-2512Wha12-1 - 236-P102512Wha121F1
UV-Stabilized marine grade polymer. UV resistant. Withstands extreme weather conditions. Will not rot, delaminate, swell or splinter. The matte texture requires no painting, finishing, or maintenance. It will last the lifetime of your boat. Pre-cut and packaged with do-it-yourself project ideas. Easy to work with using standard woodworking tools. 1 Year warranty.
1/4" X 12" X 27" White Starboard - P10-2512Wha27-1 - 236-P102512Wha271F1
UV-Stabilized marine grade polymer. UV resistant. Withstands extreme weather conditions. Will not rot, delaminate, swell or splinter. The matte texture requires no painting, finishing, or maintenance. It will last the lifetime of your boat. Pre-cut and packaged with do-it-yourself project ideas. Easy to work with using standard woodworking tools. 1 Year warranty.
1/4" X 12" X 6" White Starboard - P10-2506Wha12-1 - 236-P102506Wha121F1
UV-Stabilized marine grade polymer. UV resistant. Withstands extreme weather conditions. Will not rot, delaminate, swell or splinter. The matte texture requires no painting, finishing, or maintenance. It will last the lifetime of your boat. Pre-cut and packaged with do-it-yourself project ideas. Easy to work with using standard woodworking tools. 1 Year warranty.
