Select Category
Plumbing & Bilge
Reese 69220 Sidewinder™ Elite 20K 5Th Wheel Coupler - 69220 - 220-69220F1
REESE® Sidewinder™ is the premium pin box designed specifically for today's short bed pickups. With it's Patent pending design, it automatically eliminates turning and clearance headaches. Now you can make 90°+ turns without ever exiting the truck. Unique king pin locking mechanism moves the pivot position 22" rearward from the 5th wheel hitchTrailer automatically tracks more closely to the tow vehicle while keeping the load centered over the axlesPivoting pin box design, hook up at nearly any angleImproved, robust design adds increased stability and strengthIncludes REESE wedge to lock king pin to 5th wheel hitchVirtually maintenance freeRated for 20,000 lbs. capacityLimited lifetime warranty Fits select Lippert pin box wing set models NOTE: Not all tow vehicle and trailer combinations will allow 90° turn See website for current fits.
Reese Weight Distributing Chain Hangers, Clamp-On - 58306 - 220-58306F1
For trailers with tongue interference (gas bottles, batteries, covered frames, etc.) where SnapUp Brackets (#21501) won't install easily, we offer these easy-to-install options. They install in approximately 15 minutes. Black Powder coat finish.
Relief Valve Plate Gskt @ 2 - 88907003 - 710-27-88907003F1
Retangular Scoop Strainer W/Brass Screen - 00Rss1100P - 379-00Rss1100Pf1
Cast bronze with slide out removable screens.
Retangular Scoop Strainer W/Bronze Screen - 00Rss655P - 379-00Rss655Pf1
Cast bronze with slide out removable screens.
Retangular Scoop Strainer W/Stainless Screen - 2349Sp - 379-2349Spf1
Cast bronze with slide out removable screens.
Retangular Scoop Strainer W/Stainless Screen - 2352Sp - 379-2352Spf1
Cast bronze with slide out removable screens.
Rieco-Titan 44411 Mechanical Jack Post W/C-Ring Clamps, White, 1Ea. - 44411 - 385-44411F1
These heavy duty steel jacks are of durable construction. They include large heat-treated gears, four bearings and heavy walled tubing. 2000 lb. capacity per jack. Features a full 36" plus lift and a large foot pad for added stability. The handle won't slip off when in use, but is easily removed. Gears: large, heat-treated tungsten-steel, full 18 tooth gears for added strength and durabilityBearings: three bearings plus one master thrust bearingHandle won't slip off when in use, but is easily removedPerforms with precision in all climatesLarge foot pad for added stabilityThree tube clamps on all jacks
Rock Tamers 00108 Matte Black Adjustable 24" X 24" Rubber Mudflap System & Stainless Steel Trim Plates For 2" Receiver - 108 - 629-00108F1
Rock Tamers™ are the premier "Adjustable and Removable" Mudflap System designed to provide the ultimate protection for your towables from damage caused by rocks and road debris. Adjustable width & ground clearanceHeavy duty 24" x 24" rubber mudflaps molded with a layer of tear resistant fabric, can be cut to lengthSupport rods are stainless sleeved steel rodsStrong corrosion resistant forged aluminum center hub and armsEasily secures to drawbar (Purchased separately)Center hub requires min. 1" clearance
Rock Tamers 00110 Matte Black Adjustable 24" X 24" Rubber Mudflap System & Stainless Steel Trim Plates For 2-1/2" Receiver - 110 - 629-00110F1
Rock Tamers™ are the premier "Adjustable and Removable" Mudflap System designed to provide the ultimate protection for your towables from damage caused by rocks and road debris. Adjustable width & ground clearanceHeavy duty 24" x 24" rubber mudflaps molded with a layer of tear resistant fabric, can be cut to lengthSupport rods are stainless sleeved steel rodsStrong corrosion resistant forged aluminum center hub and armsEasily secures to drawbar (Purchased separately)Center hub requires min. 1" clearance
Rock Tamers 00112 Matte Black Adjustable 24" X 24" Rubber Mudflap System & Stainless Steel Trim Plates For 3" Receiver - 112 - 629-00112F1
Rock Tamers™ are the premier "Adjustable and Removable" Mudflap System designed to provide the ultimate protection for your towables from damage caused by rocks and road debris. Adjustable width & ground clearanceEasily secures to drawbar (Purchased separately)Center hub requires min. 1" clearance
Rubber Hose Washers, Sold Individually - 30150 - 38-30150Rf1
Perfect live red rubber 3/4" hose washers. Resist hardening and cracking. Sold individually.NOT TO BE USED IN POTABLE WATER SYSTEMS.
Rule 110V Ac Automatic Sump Pump With 8' Cord 1800 Gph - A53S - 29-A53Sf1
Designed for 110 volt AC application and installation possibilities. Comes with 8' cord and elbow adapter. Includes garden hose adapter and 90° elbow adapter for 1" NPT pipe.
Rule 1200R Barbed Bilge Pump Port Fitting, 3/4" Straight - 1200R - 29-1200Rf1
For use on newer Rule bilge pumps with interchangeable ports.
Rule 1201R Barbed Bilge Pump Port Fitting, 3/4" 90° - 1201R - 29-1201Rf1
For use on newer Rule bilge pumps with interchangeable ports.
Rule 1202R Barbed Bilge Pump Port Fitting, 1" Straight - 1202R - 29-1202Rf1
For use on newer Rule bilge pumps with interchangeable ports.
Rule 1203R Barbed Bilge Pump Port Fitting, 3/4" 90° - 1203R - 29-1203Rf1
For use on newer Rule bilge pumps with interchangeable ports.
Rule 1204R Barbed Bilge Pump Port Fitting, 3/4" Straight - 1204R - 29-1204Rf1
For use on newer Rule bilge pumps with interchangeable ports.
Rule 1205R Barbed Bilge Pump Port Fitting, 1" 90° - 1205R - 29-1205Rf1
For use on newer Rule bilge pumps with interchangeable ports.
Rule 1206R Barbed Bilge Pump Port Fitting, 1" Straight - 1206R - 29-1206Rf1
For use on newer Rule bilge pumps with interchangeable ports.
Rule 1207R Barbed Bilge Pump Port Fitting, 1-1/8" 90° - 1207R - 29-1207Rf1
For use on newer Rule bilge pumps with interchangeable ports.
Rule 1208R Barbed Bilge Pump Port Fitting, 1-1/8" Straight - 1208R - 29-1208Rf1
For use on newer Rule bilge pumps with interchangeable ports.
Rule 1220R Check Valve, 3/4" - 1220R - 29-1220Rf1
Pump check valve.
Rule 1221R Check Valve, 3/4" - 1221R - 29-1221Rf1
Pump check valve.
Rule 1222R Check Valve, 1" - 1222R - 29-1222Rf1
Pump check valve.
Rule 1223R Check Valve, 1-1/8" - 1223R - 29-1223Rf1
Pump check valve.
Rule 12V Automatic Bilge Pump, 1500 Gph - 51S - 29-51Sf1
Ignition protected. Double insulated long stack motor. Double strainer non-clogging protection. Compact, efficient and maintenance free. Totally submersible. Runs 100° cooler. No burn-out when dry. Moisture tight PTFE seals. Silent running. Vibrationless. Anti-airlock feature. Housing of heat resistant acetal resin. Heavy 5/16" stainless steel shaft. Nylon/fiberglass impeller for strength.
Rule 12V Automatic Bilge Pump, 2000 Gph - 53S - 29-53Sf1
Ignition protected. Double insulated long stack motor. Double strainer non-clogging protection. Compact, efficient and maintenance free. Totally submersible. Runs 100° cooler. No burn-out when dry. Moisture tight PTFE seals. Silent running. Vibrationless. Anti-airlock feature. Housing of heat resistant acetal resin. Heavy 5/16" stainless steel shaft. Nylon/fiberglass impeller for strength.
Rule 12V Tournament Series Livewell/Aerator Pump 1600 Gph - 209B - 29-209Bf1
High capacity anti-airlocking pumps, designed to withstand the rigors of tournament fishing while suppling the volume of water required to keep bait and catch alive and healthy. Silent running and vibrationless, will not scare the fish away. Anti-airlock feature and a heavy duty long life motor.209FDP: Nylon, dual port base for optional washdown pump connection. 1" NPT female intake, 1-1/8" discharge and a 1/2" NPT threaded port for washdown installation.209B: Bronze Base, 1" NPT female intake and 1-1/8" discharge.
Rule 12V Tournament Series Livewell/Aerator Pump 1600 Gph - 209Fdp - 29-209Fdpf1
High capacity anti-airlocking pumps, designed to withstand the rigors of tournament fishing while suppling the volume of water required to keep bait and catch alive and healthy. Silent running and vibrationless, will not scare the fish away. Anti-airlock feature and a heavy duty long life motor.209FDP: Nylon, dual port base for optional washdown pump connection. 1" NPT female intake, 1-1/8" discharge and a 1/2" NPT threaded port for washdown installation.209B: Bronze Base, 1" NPT female intake and 1-1/8" discharge.
Rule 14A-6Ul 3,700 Gph 12V 15.5 Amp High Capacity Bilge Pump With 6' Leads - 14A-6Ul - 29-14A6Ulf1
Designed for the toughest applications. Designed to produce the highest capacity available for a pump its size. 14A6UL pump is UL Listed and includes 6' leads.
Rule 2000Gph High Capacity Bilge Pump Ul Listed With 6' Leads, 12V - 10-6Ul - 29-106Ulf1
Designed for the toughest applications. Designed to produce the highest capacity available for a pump its size. 106UL pump is UL Listed and includes 6' leads.
Rule 20Da 800 Gph 12V 3.4 Amp Submersible Bilge Pump - 20Da - 29-20Daf1
Our bilge pumps provide ultimate pumping performance, which helps keep your bilge clear of nuisance water, building on the genuine Rule design. Rigorous engineering and testing helped generate the DA series of bilge pumps. Our pumps are tested to the highest standard, achieving rated performance at 12V vs. 13.6V, resulting in higher flow with better efficiency for the toughest applications. Higher Flow optimized impeller to provide greater flow at the same amperageBuilt-in Thermal Cut-Off (TCO) provides added protection for pump and vesselBack Flow Prevention reduces the amount of water left over in the bilge, reducing odor and helping keep your bilge cleanerHidden Air Vents in the Body helps prevent air locking in challenging plumbing installations and helps with the check valveThreaded Discharge easier installation, easier maintenance
Rule 20Da-24 800 Gph 24V 1.7 Amp Submersible Bilge Pump - 20Da-24 - 29-20Da24F1
Our bilge pumps provide ultimate pumping performance, which helps keep your bilge clear of nuisance water, building on the genuine Rule design. Rigorous engineering and testing helped generate the DA series of bilge pumps. Our pumps are tested to the highest standard, achieving rated performance at 12V vs. 13.6V, resulting in higher flow with better efficiency for the toughest applications. Higher Flow optimized impeller to provide greater flow at the same amperageBuilt-in Thermal Cut-Off (TCO) provides added protection for pump and vesselBack Flow Prevention reduces the amount of water left over in the bilge, reducing odor and helping keep your bilge cleanerHidden Air Vents in the Body helps prevent air locking in challenging plumbing installations and helps with the check valveThreaded Discharge easier installation, easier maintenance
Rule 20Sa 12V 800 Gph 2.8 Amp Automatic Bilge Pump - 20Sa - 29-20Saf1
Ignition protected. Double insulated long stack motor. Double strainer non-clogging protection. Compact, efficient and maintenance free. Totally submersible. Runs 100° cooler. No burn-out when dry. Moisture tight PTFE seals. Silent running. Vibrationless. Anti-airlock feature. Housing of heat resistant acetal resin. Heavy 5/16" stainless steel shaft. Nylon/fiberglass impeller for strength.
Rule 213 "Y" Fitting For 1-1/8" Hose - 213 - 29-213F1
Y Fitting for use with bilge pump hose.
Rule 25Da 500 Gph 12V 1.6 Amp Submersible Bilge Pump - 25Da - 29-25Daf1
Our bilge pumps provide ultimate pumping performance, which helps keep your bilge clear of nuisance water, building on the genuine Rule design. Rigorous engineering and testing helped generate the DA series of bilge pumps. Our pumps are tested to the highest standard, achieving rated performance at 12V vs. 13.6V, resulting in higher flow with better efficiency for the toughest applications. Higher Flow optimized impeller to provide greater flow at the same amperageBuilt-in Thermal Cut-Off (TCO) provides added protection for pump and vesselBack Flow Prevention reduces the amount of water left over in the bilge, reducing odor and helping keep your bilge cleanerHidden Air Vents in the Body helps prevent air locking in challenging plumbing installations and helps with the check valveThreaded Discharge easier installation, easier maintenance
Rule 25Da24 500 Gph 24V 0.8 Amp Submersible Bilge Pump - 25Da-24 - 29-25Da24F1
Our bilge pumps provide ultimate pumping performance, which helps keep your bilge clear of nuisance water, building on the genuine Rule design. Rigorous engineering and testing helped generate the DA series of bilge pumps. Our pumps are tested to the highest standard, achieving rated performance at 12V vs. 13.6V, resulting in higher flow with better efficiency for the toughest applications. Higher Flow optimized impeller to provide greater flow at the same amperageBuilt-in Thermal Cut-Off (TCO) provides added protection for pump and vesselBack Flow Prevention reduces the amount of water left over in the bilge, reducing odor and helping keep your bilge cleanerHidden Air Vents in the Body helps prevent air locking in challenging plumbing installations and helps with the check valveThreaded Discharge easier installation, easier maintenance
Rule 25Sa 12V 500 Gph 1.9 Amp Automatic Bilge Pump - 25Sa - 29-25Saf1
Ignition protected. Double insulated long stack motor. Double strainer non-clogging protection. Compact, efficient and maintenance free. Totally submersible. Runs 100° cooler. No burn-out when dry. Moisture tight PTFE seals. Silent running. Vibrationless. Anti-airlock feature. Housing of heat resistant acetal resin. Heavy 5/16" stainless steel shaft. Nylon/fiberglass impeller for strength.
Rule 25Sa6Wc 12V Pwc Automatic Bilge Pump, 500 Gph - 25Sa-6Wc - 29-25Sa6Wcf1
This compact pump fits in tight spaces to remove water from the engine compartment. Easy installation. Equipped with a gasoline resistant strainer base and 6' wire lead. Cycles every 2-1/2 minutes to check for waterNo float switch neededCheck valve w/air vent to prevent airlockGasoline-resistant strainer baseIgnition protected
Rule 27Da 1,100 Gph 12V 3.7 Amp Submersible Bilge Pump - 27Da - 29-27Daf1
Our bilge pumps provide ultimate pumping performance, which helps keep your bilge clear of nuisance water, building on the genuine Rule design. Rigorous engineering and testing helped generate the DA series of bilge pumps. Our pumps are tested to the highest standard, achieving rated performance at 12V vs. 13.6V, resulting in higher flow with better efficiency for the toughest applications. Higher Flow optimized impeller to provide greater flow at the same amperageBuilt-in Thermal Cut-Off (TCO) provides added protection for pump and vesselBack Flow Prevention reduces the amount of water left over in the bilge, reducing odor and helping keep your bilge cleanerHidden Air Vents in the Body helps prevent air locking in challenging plumbing installations and helps with the check valveThreaded Discharge easier installation, easier maintenance
Rule 27Sa 12V 1,100 Gph 3.3 Amp Automatic Bilge Pump - 27Sa - 29-27Saf1
Ignition protected. Double insulated long stack motor. Double strainer non-clogging protection. Compact, efficient and maintenance free. Totally submersible. Runs 100° cooler. No burn-out when dry. Moisture tight PTFE seals. Silent running. Vibrationless. Anti-airlock feature. Housing of heat resistant acetal resin. Heavy 5/16" stainless steel shaft. Nylon/fiberglass impeller for strength.
Rule 3" Inline Bilge Blower 12V - 140 - 29-140F1
Provides ventilation for bilges, engine compartments, galleys and heads. Designed for efficient, high output operation. Easily installed on any flat surfaces. Sealed motor shaft for moisture protection.
Rule 3700 Gph High Capacity Bilge Pump, 12V - 14A - 29-14Af1
Designed for the toughest applications. Designed to produce the highest capacity available for a pump its size.
Rule 3700 Gph High Capacity Bilge Pump, 24V - 16A - 29-16Af1
Designed for the toughest applications. Designed to produce the highest capacity available for a pump its size.
Rule 4" Inline Bilge Blower 12V - 240 - 29-240F1
Provides ventilation for bilges, engine compartments, galleys and heads. Designed for efficient, high output operation. Easily installed on any flat surfaces. Sealed motor shaft for moisture protection.
Rule 4000 Gph High Capacity Bilge Pump, 12V - 56D - 29-56Df1
Designed for the toughest applications. Designed to produce the highest capacity available for a pump its size.
Rule 4000 Gph High Capacity Bilge Pump, 24V - 56D-24 - 29-56D24F1
Designed for the toughest applications. Designed to produce the highest capacity available for a pump its size.
Rule 401C Tournament Series Livewell Pump 12V - 401C - 29-401C Superseded By: 29-601Cf1
Push button motor cartridge removal makes it quick and easy to replace a motor or change your output. Base rotates 360° to fit any application. Dual port option allows connection of washdown pump with just the single thru hull fitting. Includes both straight and 90° hose barb fittings. Anti-airlock protection.
Rule 401Stc Tournament Series Livewell Pump 12V - 401Stc - 29-401Stc Superseded By: 29-601Stcf1
Push button motor cartridge removal makes it quick and easy to replace a motor or change your output. Base rotates 360° to fit any application. Dual port option allows connection of washdown pump with just the single thru hull fitting. Includes both straight and 90° hose barb fittings. Anti-airlock protection.
Rule 403C Tournament Series Livewell Pump 12V - 403C - 29-403C Superseded By: 29-603Cf1
Push button motor cartridge removal makes it quick and easy to replace a motor or change your output. Base rotates 360° to fit any application. Dual port option allows connection of washdown pump with just the single thru hull fitting. Includes both straight and 90° hose barb fittings. Anti-airlock protection.
Rule 403Fc Tournament Series Livewell Pump 12V - 403Fc - 29-403Fcf1
Push button motor cartridge removal makes it quick and easy to replace a motor or change your output. Base rotates 360° to fit any application. Dual port option allows connection of washdown pump with just the single thru hull fitting. Includes both straight and 90° hose barb fittings. Anti-airlock protection.
Rule 405Fc Tournament Series Livewell Pump 12V - 405Fc - 29-405Fcf1
Push button motor cartridge removal makes it quick and easy to replace a motor or change your output. Base rotates 360° to fit any application. Dual port option allows connection of washdown pump with just the single thru hull fitting. Includes both straight and 90° hose barb fittings. Anti-airlock protection.
Rule 49Pwc Pwc Bilge Pump On/Off Switch - 49Pwc - 29-49Pwcf1
PWC pump On/Off switch for on demand use of Rule PWC pumps. Water resistant. Fits 29-25D6WC.
Rule 601Fc Straight Seacock 500 Gph 12V - 601Fc - 29-601Fcf1
Designed to deliver superior performance and unsurpassed quality - making it the perfect choice for keeping bait and catch alive. To meet the needs of today's faster watercraft, this livewell pump can withstand the pressures of high-speed water intake scoops. High efficiency pump design for optimal bait health. Simple one hand 'twist & click' motor cartridge removal/replacement. Inlets for straight thru-hull, angled thru-hull and seacock installations. Secondary inlet port for washdown pump connection. Advanced anti-airlock protection.
Rule 601Stc Straight Thru-Hull 500 Gph 12V - 601Stc - 29-601Stcf1
Designed to deliver superior performance and unsurpassed quality - making it the perfect choice for keeping bait and catch alive. To meet the needs of today's faster watercraft, this livewell pump can withstand the pressures of high-speed water intake scoops. High efficiency pump design for optimal bait health. Simple one hand 'twist & click' motor cartridge removal/replacement. Inlets for straight thru-hull, angled thru-hull and seacock installations. Secondary inlet port for washdown pump connection. Advanced anti-airlock protection.
Rule 603Fc Straight Seacock 800 Gph 12V - 603Fc - 29-603Fcf1
Designed to deliver superior performance and unsurpassed quality - making it the perfect choice for keeping bait and catch alive. To meet the needs of today's faster watercraft, this livewell pump can withstand the pressures of high-speed water intake scoops. High efficiency pump design for optimal bait health. Simple one hand 'twist & click' motor cartridge removal/replacement. Inlets for straight thru-hull, angled thru-hull and seacock installations. Secondary inlet port for washdown pump connection. Advanced anti-airlock protection.
Rule 603Stc Straight Thru-Hull 800 Gph 12V - 603Stc - 29-603Stcf1
Designed to deliver superior performance and unsurpassed quality - making it the perfect choice for keeping bait and catch alive. To meet the needs of today's faster watercraft, this livewell pump can withstand the pressures of high-speed water intake scoops. High efficiency pump design for optimal bait health. Simple one hand 'twist & click' motor cartridge removal/replacement. Inlets for straight thru-hull, angled thru-hull and seacock installations. Secondary inlet port for washdown pump connection. Advanced anti-airlock protection.
Rule 605Fc Straight Seacock 1100 Gph 12V - 605Fc - 29-605Fcf1
Designed to deliver superior performance and unsurpassed quality - making it the perfect choice for keeping bait and catch alive. To meet the needs of today's faster watercraft, this livewell pump can withstand the pressures of high-speed water intake scoops. High efficiency pump design for optimal bait health. Simple one hand 'twist & click' motor cartridge removal/replacement. Inlets for straight thru-hull, angled thru-hull and seacock installations. Secondary inlet port for washdown pump connection. Advanced anti-airlock protection.
Rule 605Stc Straight Thru-Hull 1100 Gph 12V - 605Stc - 29-605Stcf1
Designed to deliver superior performance and unsurpassed quality - making it the perfect choice for keeping bait and catch alive. To meet the needs of today's faster watercraft, this livewell pump can withstand the pressures of high-speed water intake scoops. High efficiency pump design for optimal bait health. Simple one hand 'twist & click' motor cartridge removal/replacement. Inlets for straight thru-hull, angled thru-hull and seacock installations. Secondary inlet port for washdown pump connection. Advanced anti-airlock protection.
Rule 65Dr Replacement Cart For 500 Gph Pump/Livewell Pump - 65Dr - 29-65Drf1
Rule 66Dr Replacement Cart For 800 Gph Pump/Livewell Pump - 66Dr - 29-66Drf1
Rule 67Dr Replacement Cart For 1100 Gph Pump/Livewell Pump - 67Dr - 29-67Drf1
Rule 90 Degree Thru Hull Fitting - 61 - 29-61F1
High impact molded plastic. Will not rust, corrode or discolor.
Rule Adaptor 1-1/2" Hose To 1-1/8" Hose - 67 - 29-67F1
Molded from heavy-duty, high impact plastic. Rust and corrosion proof.
Rule Garden Hose Adaptor 1-1/8" Hose To 3/4" Garden Hose - 68 - 29-68F1
Molded from heavy-duty, high impact plastic. Rust and corrosion proof.
Rule Gold Series 3700 Gph High Capacity Bilge Pump, 12V - 13A - 29-13Af1
Designed for the toughest applications. Designed to produce the highest capacity available for a pump its size. Gold series pumps feature a 5-year warranty.
Rule Livewell Debris Strainer - 73 - 29-73F1
Stainless steel mesh basket that threads on to the intake tube of the aerator.
Rule Mate™ 2000Gph Fully Auto Bilge Pump, 24V - Rm2000A-24 - 29-Rm2000A24F1
The eco-friendly Rule Mate pumps feature a solid state water sensing technology to eliminate a separate float switch. The sensor's unique "field effect" technology is eco-friendly because straight motor oil in the bilge will not turn on the pump. Includes both straight and 90 degree hose fittings, a snap-on strainer for easy cleaning and an anti-fouling impeller. 3-Year limited warranty.
Rule Replacement Base Only For Round Rule 2800-3700 Gph Bilge Pumps - 279 - 29-279F1
Original replacement strainer base for your Rule bilge pumps.
Rule Replacement Base Only For Round Rule 360 / 500 Gph Submersible Bilge Pumps - 1231R - 29-1231Rf1
Original replacement strainer base for your Rule bilge pumps.
Rule Replacement Base Only For Round Rule 360 To 1100 Gph Bilge Pumps - 275 - 29-275F1
Original replacement strainer base for your Rule bilge pumps.
Rule Replacement Base Only For Round Rule 800 / 1100 Gph Submersible Bilge Pumps - 1232R - 29-1232Rf1
Original replacement strainer base for your Rule bilge pumps.
Rule Replacement Base Only For Rule Model 02 Or 10 Bilge Pumps - 278 - 29-278F1
Original replacement strainer base for your Rule bilge pumps.
Rule Replacement Base Only For Rule-Mate 1500-2000 Gph Bilge Pumps - 286 - 29-286F1
Original replacement strainer base for your Rule bilge pumps.
Rule Replacement Base Only For Square Rule Bilge Pumps - 277 - 29-277F1
Original replacement strainer base for your Rule bilge pumps.
Rule Rm1100B Rule-Mate™ Automatic Bilge Pump, 1100 Gph, 12V - Rm1100B - 29-Rm1100Bf1
The eco-friendly Rule Mate pumps feature a solid state water sensing technology to eliminate a separate float switch. The sensor's unique "field effect" technology is eco-friendly because straight motor oil in the bilge will not turn on the pump. Includes a straight hose fitting, a snap-on strainer for easy cleaning and an anti-fouling impeller. 3-Year limited warranty.
Rule Rm1100B24 Rule-Mate Automatic Bilge Pump, 1100 Gph, 24V - Rm1100B-24 - 29-Rm1100B24F1
The eco-friendly Rule Mate pumps feature a solid state water sensing technology to eliminate a separate float switch. The sensor's unique "field effect" technology is eco-friendly because straight motor oil in the bilge will not turn on the pump. Includes a straight hose fitting, a snap-on strainer for easy cleaning and an anti-fouling impeller. 3-year limited warranty.
Rule Rm1500A Rule-Mate Automatic Bilge Pump - Rm1500A - 29-Rm1500Af1
The eco-friendly Rule Mate pumps feature a solid state water sensing technology to eliminate a separate float switch. The sensor's unique "field effect" technology is eco-friendly because straight motor oil in the bilge will not turn on the pump. Includes a straight hose fitting, a snap-on strainer for easy cleaning and an anti-fouling impeller. 3-Year limited warranty.
Rule Rm2000A Rule-Mate Automatic Bilge Pump - Rm2000A - 29-Rm2000Af1
The eco-friendly Rule Mate pumps feature a solid state water sensing technology to eliminate a separate float switch. The sensor's unique "field effect" technology is eco-friendly because straight motor oil in the bilge will not turn on the pump. Includes a straight hose fitting, a snap-on strainer for easy cleaning and an anti-fouling impeller. 3-Year limited warranty.
Rule Rm500B Rule-Mate™ Automatic Bilge Pump, 500 Gph, 12V - Rm500B - 29-Rm500Bf1
The eco-friendly Rule Mate pumps feature a solid state water sensing technology to eliminate a separate float switch. The sensor's unique "field effect" technology is eco-friendly because straight motor oil in the bilge will not turn on the pump. Includes a straight hose fitting, a snap-on strainer for easy cleaning and an anti-fouling impeller. 3-Year limited warranty.
Rule Rm500B24 Rule-Mate™ Automatic Bilge Pump, 500 Gph, 24V - Rm500B-24 - 29-Rm500B24F1
The eco-friendly Rule Mate pumps feature a solid state water sensing technology to eliminate a separate float switch. The sensor's unique "field effect" technology is eco-friendly because straight motor oil in the bilge will not turn on the pump. Includes a straight hose fitting, a snap-on strainer for easy cleaning and an anti-fouling impeller. 3-Year limited warranty.
Rule Rm800B Rule-Mate™ Automatic Bilge Pump, 800 Gph, 12V - Rm800B - 29-Rm800Bf1
The eco-friendly Rule Mate pumps feature a solid state water sensing technology to eliminate a separate float switch. The sensor's unique "field effect" technology is eco-friendly because straight motor oil in the bilge will not turn on the pump. Includes a straight hose fitting, a snap-on strainer for easy cleaning and an anti-fouling impeller. 3-Year limited warranty.
Rule Rm800B24 Rule-Mate™ Automatic Bilge Pump, 800 Gph, 24V - Rm800B-24 - 29-Rm800B24F1
The eco-friendly Rule Mate pumps feature a solid state water sensing technology to eliminate a separate float switch. The sensor's unique "field effect" technology is eco-friendly because straight motor oil in the bilge will not turn on the pump. Includes a straight hose fitting, a snap-on strainer for easy cleaning and an anti-fouling impeller. 3-Year limited warranty.
Rule Stepped Adaptor 1-1/8" Hose To 3/4" Or 5/8" Garden Hose - 69 - 29-69F1
Molded from heavy-duty, high impact plastic. Rust and corrosion proof.
Rule Submersible Bilge Pump, 1100 Gph, 24V - 27Da-24 - 29-27Da24F1
Our bilge pumps provide ultimate pumping performance, which helps keep your bilge clear of nuisance water, building on the genuine Rule design. Rigorous engineering and testing helped generate the DA series of bilge pumps. Our pumps are tested to the highest standard, achieving rated performance at 12V vs. 13.6V, resulting in higher flow with better efficiency for the toughest applications. Higher Flow optimized impeller to provide greater flow at the same amperageBuilt-in Thermal Cut-Off (TCO) provides added protection for pump and vesselBack Flow Prevention reduces the amount of water left over in the bilge, reducing odor and helping keep your bilge cleanerHidden Air Vents in the Body helps prevent air locking in challenging plumbing installations and helps with the check valveThreaded Discharge easier installation, easier maintenance
Rule Submersible Bilge Pump, 360 Gph, 12V - 24Da - 29-24Daf1
Our bilge pumps provide ultimate pumping performance, which helps keep your bilge clear of nuisance water, building on the genuine Rule design. Rigorous engineering and testing helped generate the DA series of bilge pumps. Our pumps are tested to the highest standard, achieving rated performance at 12V vs. 13.6V, resulting in higher flow with better efficiency for the toughest applications. Higher Flow optimized impeller to provide greater flow at the same amperageBuilt-in Thermal Cut-Off (TCO) provides added protection for pump and vesselBack Flow Prevention reduces the amount of water left over in the bilge, reducing odor and helping keep your bilge cleanerHidden Air Vents in the Body helps prevent air locking in challenging plumbing installations and helps with the check valveThreaded Discharge easier installation, easier maintenance
Rule Variable Flow Control Valve - 75 - 29-75F1
VARIABLE FLOW CONTROL VALVEAllows increases and decreases of flow from the pump with no damage at all to the pump. Range includes from fully open to totally off.
S/S Adj Clamp On Rod Holder - F16-2623Pol-1 - 236-F162623Pol1F1
Adjustable stainless steel clamp on rod holder fits virtually any pipe or tube. Internal locking positions turn every 18° to adjust the angle of attack! Note: pipe sizes reference schedule 40 IPS pipe and are not intended to represent outside diameters. 3 Year warranty.
S/S Thru-Hull 1-1/8" W/Hose End - 70Thh112 - 379-70Thh112F1
316 Stainless steel.
S/S Thru-Hull 1.50" W/Hose End - 70Thh150 - 379-70Thh150F1
316 Stainless steel.
S3 Digital Bilge Switch 12V - 1059752 - 23-48017F1
The S3 uses a proprietary electronic sensing technology and is engineered to operate in any bilge water mixture without failure and reduce continuous cycling. Fully sealed electronics are protected from water or chemical damage. It can be mounted on the floor of the bilge or directly to a stringer. Compatible with all competitive products with no moving parts. 5-Year warranty. 2.73" H x 3.16" W x 1.68" D.
Samlexsolar Msk-Xlr 2-Pin Xlr Adapter - Msk-Xlr - 705-Mskxlrf1
For use with battery cable suppplied with MSK series portable solar charging kits.
Samson 872007706030 Amsteel® Blue Series, Grey, 7/64" X 600' - 872 007 706 030 - 83-872007706030F1
AmSteel® Blue is a torque-free, 12-strand single braid that yields the maximum in strength-to-weight ratio and, size-for-size, is the same strength as steel - yet it floats. AmSteel® Blue is an excellent wire rope replacement with extremely low stretch, and superior flex fatigue and wear resistance.
Samson 872007806030 Amsteel® Blue Series, Blue, 7/64" X 600' - 872 007 806 030 - 83-872007806030F1
AmSteel® Blue is a torque-free, 12-strand single braid that yields the maximum in strength-to-weight ratio and, size-for-size, is the same strength as steel - yet it floats. AmSteel® Blue is an excellent wire rope replacement with extremely low stretch, and superior flex fatigue and wear resistance.
Samson 872008706030 Amsteel® Blue Series, Grey, 1/8" X 600' - 872 008 706 030 - 83-872008706030F1
AmSteel® Blue is a torque-free, 12-strand single braid that yields the maximum in strength-to-weight ratio and, size-for-size, is the same strength as steel - yet it floats. AmSteel® Blue is an excellent wire rope replacement with extremely low stretch, and superior flex fatigue and wear resistance.
Samson 872008806030 Amsteel® Blue Series, Blue, 1/8" X 600' - 872 008 806 030 - 83-872008806030F1
AmSteel® Blue is a torque-free, 12-strand single braid that yields the maximum in strength-to-weight ratio and, size-for-size, is the same strength as steel - yet it floats. AmSteel® Blue is an excellent wire rope replacement with extremely low stretch, and superior flex fatigue and wear resistance.
Samson 872010706030 Amsteel® Blue Series, Grey, 5/32" X 600' - 872 010 706 030 - 83-872010706030F1
AmSteel® Blue is a torque-free, 12-strand single braid that yields the maximum in strength-to-weight ratio and, size-for-size, is the same strength as steel - yet it floats. AmSteel® Blue is an excellent wire rope replacement with extremely low stretch, and superior flex fatigue and wear resistance.
Samson 872012706030 Amsteel® Blue Series, Grey, 3/16" X 600' - 872 012 706 030 - 83-872012706030F1
AmSteel® Blue is a torque-free, 12-strand single braid that yields the maximum in strength-to-weight ratio and, size-for-size, is the same strength as steel - yet it floats. AmSteel® Blue is an excellent wire rope replacement with extremely low stretch, and superior flex fatigue and wear resistance.
Samson 872016206030 Amsteel® Blue Series, Black, 1/4" X 600' - 872016206030 - 83-872016206030F1
AmSteel® Blue is a torque-free, 12-strand single braid that yields the maximum in strength-to-weight ratio and, size-for-size, is the same strength as steel - yet it floats. AmSteel® Blue is an excellent wire rope replacement with extremely low stretch, and superior flex fatigue and wear resistance.
Samson 872016706030 Amsteel® Blue Series, Grey, 1/4" X 600' - 872 016 706 030 - 83-872016706030F1
AmSteel® Blue is a torque-free, 12-strand single braid that yields the maximum in strength-to-weight ratio and, size-for-size, is the same strength as steel - yet it floats. AmSteel® Blue is an excellent wire rope replacement with extremely low stretch, and superior flex fatigue and wear resistance.
Samson 872020206030 Amsteel® Blue Series, Black, 5/16" X 600' - 872020206030 - 83-872020206030F1
AmSteel® Blue is a torque-free, 12-strand single braid that yields the maximum in strength-to-weight ratio and, size-for-size, is the same strength as steel - yet it floats. AmSteel® Blue is an excellent wire rope replacement with extremely low stretch, and superior flex fatigue and wear resistance.
Samson 872024206030 Amsteel® Blue Series, Black, 3/8" X 600' - 872 024 206 030 - 83-872024206030F1
AmSteel® Blue is a torque-free, 12-strand single braid that yields the maximum in strength-to-weight ratio and, size-for-size, is the same strength as steel - yet it floats. AmSteel® Blue is an excellent wire rope replacement with extremely low stretch, and superior flex fatigue and wear resistance.
Samson 872032206030 Amsteel® Blue Series, Black, 1/2" X 600' - 872032206030 - 83-872032206030F1
AmSteel® Blue is a torque-free, 12-strand single braid that yields the maximum in strength-to-weight ratio and, size-for-size, is the same strength as steel - yet it floats. AmSteel® Blue is an excellent wire rope replacement with extremely low stretch, and superior flex fatigue and wear resistance.
Samson 872040206030 Amsteel® Blue Series, Black, 5/8" X 600' - 872040206030 - 83-872040206030F1
AmSteel® Blue is a torque-free, 12-strand single braid that yields the maximum in strength-to-weight ratio and, size-for-size, is the same strength as steel - yet it floats. AmSteel® Blue is an excellent wire rope replacement with extremely low stretch, and superior flex fatigue and wear resistance.
Saniflex Sanitation Hose - Sfh10 - 78-Sfh10F1
The most flexible marine grade hose on the market. Flexible radius for tight bending and easy installation, reinforced double steel wire helix with high strength synthetic textile yarn. 10 year warranty against odor permeation.
Saniflex Sanitation Hose, 1-1/2", 50 Ft - Sfh50 - 78-Sfh50F1
The most flexible marine grade hose on the market. Flexible radius for tight bending and easy installation, reinforced double steel wire helix with high strength synthetic textile yarn. 10 year warranty against odor permeation.
Sanitation Hose 1 1/2In X 65Ft - 16-105-1120S-1 - 88-10511201F1
Sanitation Hose 1-1/2" X 50' - 1011126 - 606-1011126F1
For all head and holding tank connections. Extra thick tube and cover especially compounded for maximum resistance to odor permeation and winterizing with antifreeze. Helical wire between 2 ply reinforcement provides excellent flexibility and bend radius. NOT FOR POTABLE WATER. 5 Year Warranty.
Scandvik 10002P Adapter 3/8" Female Bsp To 1/2" Male - 10002P - 390-10002Pf1
Brass Hose Adapter 3/8" BSP - 1/2" NPT
Scandvik 10003 Chrome Plated Brass Compact Bulkhead Connection For Shower Hose, 3/8" Bsp-M Hose Connection - 10003P - 390-10003Pf1
Chrome/brass bulkhead elbow may be required to route the plumbing behind the bulkhead for a clean installation when using a shower rail. 3/8" hose connection fits Scandvik hoses.
Scandvik 10015P Adapter 3/8" Female Bsp To 1/2" Male - 10015P - 390-10015Pf1
Brass Hose Adapter 3/8" BSP - 1/2" NPT
Scandvik 10055 Recessed Transom Shower White With 6' Nylon Hose, Horizontal Mount Only - 10055P - 390-10055Pf1
Plastic handle with chrome brass head, on/off push button and 6' nylon hose. 2-1/4" Mounting hole. Thread type: 3/8" female BSP. White. Adapter to convert to 1/2" NPS-M included for 6' hose kits.
Scandvik 10187 Stainless Steel Washdown Spigot - 10187P - 390-10187Pf1
Washdown spigot. Standard garden hose thread provides easy hose hookup for quick washdowns. Water connection: 1/2" Male straight thread. 1" mounting hole. 2-1/4" Flange dia.
Scandvik 10191 White Standard Elbow Sprayer With 6' White Nylon Hose - 10191P - 390-10191Pf1
These reliable composite showers have an on/off trigger or flip up for continuous water flow. 1-1/16" Mounting hole. 3/8" BSB thread. Kits include 6' color matched hose and counter top holder and 3/8-1/2 NPT male adaptor.
Scandvik 10216 Rectangular Stainless Steel Mirror Finish Sink - 10216 - 390-10216F1
18/10 Stainless steel mirror finish rectangular sinks. Take full advantage of the space in your galley, create your own multibowl sink with two or more rectangular sinks. Mirror Finish basins are not recommended for exterior use due to the reflective nature of the polished stainless steel. 2-1/16" Drain opening, 1/2" flange, Profile A.
Scandvik 10218 Rectangular Stainless Steel Mirror Finish Sink - 10218 - 390-10218F1
18/10 Stainless steel mirror finish rectangular sinks. Take full advantage of the space in your galley, create your own multibowl sink with two or more rectangular sinks. Mirror Finish basins are not recommended for exterior use due to the reflective nature of the polished stainless steel. 2-1/16" Drain opening, 1/2" flange, Profile A.
Scandvik 10271 5' Chrome Flex Hose For Elbow Sprayer Handle - 10271 - 390-10271F1
Chrome Flex Hose for elbow Sprayer Handles. Scandvik elbow sprayer handles have an angled connection for the hose. End fittings: 3/8 BSP-F x 15/1 Metric-M. Material: Chrome plated brass sprial.
Scandvik 10278P Elbow Sprayer Handle, White - 10278P - 390-10278Pf1
White elbow Standard GRP trigger sprayer handle. Thread Type: 15/1 metric female.
Scandvik 10280 Stainless Steel Oval Basin - 10280 - 390-10280F1
This sink uses a standard 2" household drain available at any local plumbing outlet. Edge profile A.
Scandvik 10290 6' White Nylon Hose For Straight Sprayer Handles - 10290 - 390-10290F1
White Nylon Hose for straight Sprayer Handles. Scandvik straight sprayer handles have an inline connection for the hose. End Fittings: 3/8" BSP-F x 1/2" NPS-F. Material: White Nylon.
Scandvik 10298 Recessed Transom Shower White With 13' Nylon Hose, Horizontal Mount Only - 10298 - 390-10298F1
Plastic handle with chrome brass head, on/off push button and 13' nylon hose. 2-1/4" Mounting hole. Thread type: 3/8" female BSP. White.
Scandvik 10304 3/4" Hose Barb Adapter Fits 1-1/4" Threaded Drain With 3/4" Hose Barb Outlet - 10304P - 390-10304Pf1
All drains include stoppers.
Scandvik 10306 Sink Drain With Stopper Fits 2-1/16" Drain Hole With A 1" Hose Barb Outlet - 10306P - 390-10306Pf1
Fits 2-1/16" drain hole openings.Sink drain with a 1" hose barb connection. Includes stopper and chain. Our most popular easy to install drain. Requires 1-1/4" clearance below sink.
Scandvik 10307 Cockpit Or Shower Drain Fits 2-1/16" Drain Hole, 1" Hose Barb Outlet - 10307P - 390-10307Pf1
Drain basket compresses from below when tightening screen from above. Included screw (6mm) allows up to 1/2" floor thickness. Stainless grate diameter is 2-3/4".
Scandvik 10308 Sink Drain With Basket And Stopper Fits 2-1/16" Drain Hole With A 1" Hose Barb Outlet - 10308P - 390-10308Pf1
Fits 2-1/16" drain hole openings.Sink drain with 1? hose barb connection. Includes stopper and chain with removable strainer. Requires 1-7/8" clearance below sink.
Scandvik 10479 Single Lever Shower Mixer Valve With Compact Trim Ring (Includes (3) 1/2" Hose Barb Fittings) - 10479 - 390-10479F1
Chrome plated brass mixer with compact trim ring. Ceramic valves for a drip free faucet. 1-3/4" Mounting hole. 1/2" NPT female straight connection with 1/2" hose barb fittings included. 3/8" hose connection fits Scandvik hoses. If you are using a shower rail, a chrome/brass bulkhead elbow may be required to route the plumbing behind the bulkhead for a clean installation.
Scandvik 10650 Chrome Plated Brass Bulkhead Swivel Shower Handle Holder Fits All Showers With Elbow Shower Handles - 10650P - 390-10650Pf1
Chrome plated brass bulkhead swivel holder for all shower handles with an elbow hose attachment. Great for hands free showering.
Scandvik 10750 Recessed Transom Shower For Vertical Installation With 6' White Nylon Hose - 10750P - 390-10750Pf1
Plastic handle with chrome brass head, on/off push button and 6' nylon hose. 2-1/4" Mounting hole. Thread type: 3/8" female BSP. White. Adapter to convert to 1/2" NPS-M included for 6' hose kits.
Scandvik 10777P Elbow Sprayer Handle With On/Off Valve - 10777P - 390-10777Pf1
Elbow combo spray handle with on/off valve and adjustable 2-way adjustable spray pattern from faucet flow or shower spray. Helps with water conservation. Has a 15/1 metric female thread type.
Scandvik 10871 Single Lever Galley Faucet With Pull-Out Sprayer, 5' Chrome-Flex Hose - 10871 - 390-10871F1
Combines one handed operation and ceramic valves to guarantee a drip free faucet. Features a pull out sprayer with a 5' chrome flex hose and a push button spray pattern adjustment located on sprayer handle. Chrome plated brass. 3/8" male thread BSP and 1/2" male NPT. Requires a 1-1/2" mounting hole.
Scandvik 11004 Delrin Hose Adapter 3/8" Male Bsp To 1/2" Male Nps - 10961P - 390-10961Pf1
Delrin Hose Adapter 3/8" male BSP to 1/2" male NPS
Scandvik 12106 Recessed Push-Button Transom Shower (Includes White Handle, Cup, Cap And 6' White Hose - 12106P - 390-12106Pf1
6' nylon hose with sprayer handle. Hinged cup/cap combination leaves a flush surface when not in use. Requires a 2-3/4" mounting hole. 3/8" BSP water connection.
Scandvik 12107 Recessed Euro Sprayer Transom Shower White Handle, Cup And Cap With 6' White Nylon Hose - 12107P - 390-12107Pf1
6' nylon hose with sprayer handle. Hinged cup/cap combination leaves a flush surface when not in use. Requires a 2-3/4" mounting hole. 3/8" BSP water connection.
Scandvik 12124 Stainless Steel Recessed Shower Cap With Composite Cup Push-Button Sprayer Black With 6' Black Nylon Hose - 12124P - 390-12124Pf1
316 Stainless steel cover with composite cup and 6' nylon hose. 3/16" BSP female water connection. 2-3/4" Mounting hole.
Scandvik 12125 Stainless Steel Recessed Shower Cap With Composite Cup Mounts Euro Style Plastic Sprayer, Chrome Handle, Black Cup With 6' Black Nylon Hose - 12125P - 390-12125Pf1
316 Stainless steel cover with composite cup and 6' nylon hose. 3/16" BSP female water connection. 2-3/4" Mounting hole.
Scandvik 12134 316 Stainless Steel Recessed Transom Shower Mixer - 12134 - 390-12134F1
Scandvik 14000 Euro Elbow Abs Trigger Sprayer Handle Only, White - 14000 - 390-14000F1
Euro elbow sprayer handle. Thread type is 15/1 female metric.
Scandvik 14001 Euro Elbow Abs Trigger Sprayer Handle Only, Black - 14001 - 390-14001F1
Euro elbow sprayer handle. Thread type is 15/1 female metric.
Scandvik 14002 Euro Elbow Abs Trigger Sprayer Handle Only, Chrome - 14002 - 390-14002F1
Euro elbow sprayer handle. Thread type is 15/1 female metric.
Scandvik 14126 Vertical Shower Box, White Sprayer With 6' White Nylon Hose - 14126 - 390-14126F1
Chrome brass mixer with white plastic shower handle and 6' nylon hose. Acrylic capped ABS housing. Female 1/2" NPS.
Scandvik 24401 Aba Hose Clamp Counter Top Display Rack - 24401 - 390-24401F1
Holds 240 assorted ABA 316 Original and 304 Mini stainless steel hose clamps. Display Rack Only.
Scandvik 50010 Breeze Mini 316 Ss Hose Clamp #4 - 50010 - 390-50010F1
A lightweight, streamlined hose clamp generally used in small diameter applications such as air and fuel lines. 5/16" band with engineered perforations, three-piece construction, SAE standard J1508 type M, 1/4" hex screw, 5/16" band and one-piece housing all in 316 stainless steel. Made in the USA.
Scandvik 50011 Breeze Mini 316 Ss Hose Clamp #6 - 50011 - 390-50011F1
A lightweight, streamlined hose clamp generally used in small diameter applications such as air and fuel lines. 5/16" band with engineered perforations, three-piece construction, SAE standard J1508 type M, 1/4" hex screw, 5/16" band and one-piece housing all in 316 stainless steel. Made in the USA.
Scandvik 50012 Breeze Mini 316 Ss Hose Clamp #8 - 50012 - 390-50012F1
A lightweight, streamlined hose clamp generally used in small diameter applications such as air and fuel lines. 5/16" band with engineered perforations, three-piece construction, SAE standard J1508 type M, 1/4" hex screw, 5/16" band and one-piece housing all in 316 stainless steel. Made in the USA.
Scandvik 50013 Breeze Mini 316 Ss Hose Clamp #10 - 50013 - 390-50013F1
A lightweight, streamlined hose clamp generally used in small diameter applications such as air and fuel lines. 5/16" band with engineered perforations, three-piece construction, SAE standard J1508 type M, 1/4" hex screw, 5/16" band and one-piece housing all in 316 stainless steel. Made in the USA.
Scandvik 50014 Breeze Mini 316 Ss Hose Clamp #16 - 50014 - 390-50014F1
A lightweight, streamlined hose clamp generally used in small diameter applications such as air and fuel lines. 5/16" band with engineered perforations, three-piece construction, SAE standard J1508 type M, 1/4" hex screw, 5/16" band and one-piece housing all in 316 stainless steel. Made in the USA.
Scandvik 50015 Breeze Mini 316 Ss Hose Clamp #20 - 50015 - 390-50015F1
A lightweight, streamlined hose clamp generally used in small diameter applications such as air and fuel lines. 5/16" band with engineered perforations, three-piece construction, SAE standard J1508 type M, 1/4" hex screw, 5/16" band and one-piece housing all in 316 stainless steel. Made in the USA.
Scandvik 50016 Breeze Mini 316 Ss Hose Clamp #24 - 50016 - 390-50016F1
A lightweight, streamlined hose clamp generally used in small diameter applications such as air and fuel lines. 5/16" band with engineered perforations, three-piece construction, SAE standard J1508 type M, 1/4" hex screw, 5/16" band and one-piece housing all in 316 stainless steel. Made in the USA.
Scandvik 50017 Breeze Mini 316 Ss Hose Clamp #28 - 50017 - 390-50017F1
A lightweight, streamlined hose clamp generally used in small diameter applications such as air and fuel lines. 5/16" band with engineered perforations, three-piece construction, SAE standard J1508 type M, 1/4" hex screw, 5/16" band and one-piece housing all in 316 stainless steel. Made in the USA.
Scandvik 50200 Breeze Constant-Torque® Hose Clamp, #10, 10/Box - 50200 - 390-50200 Superseded By: 390-51200F1
A worm drive hose clamp that automatically increases or decreases diameter due to changes in temperature. Extended inner liner, constant-tension performance, SAE standard J1508 type SLF & SLHD, 410 stainless steel hex screw, 300-series stainless steel band and stainless steel Belleville washers.
Scandvik 50207 Breeze Constant-Torque® Hose Clamp, #412, 10/Box - 50207 - 390-50207 Superseded By: 390-51207F1
A worm drive hose clamp that automatically increases or decreases diameter due to changes in temperature. Extended inner liner, constant-tension performance, SAE standard J1508 type SLF & SLHD, 410 stainless steel hex screw, 300-series stainless steel band and stainless steel Belleville washers.
Scandvik 50211 Breeze Constant-Torque® Hose Clamp, #612, 10/Box - 50211 - 390-50211 Superseded By: 390-51211F1
A worm drive hose clamp that automatically increases or decreases diameter due to changes in temperature. Extended inner liner, constant-tension performance, SAE standard J1508 type SLF & SLHD, 410 stainless steel hex screw, 300-series stainless steel band and stainless steel Belleville washers.
Scandvik 51200 Breeze Constant-Torque® Hose Clamp, Sae:10 Min:9/16", Max:1-1/16", Band: 9/16" - 51200 - 390-51200F1
Scandvik 51201 Breeze Constant-Torque® Hose Clamp, Sae:16 Min:13/16", Max:1-1/2", Band: 9/16" - 51201 - 390-51201F1
Scandvik 51202 Breeze Constant-Torque® Hose Clamp, Sae:24 Min:1-1/16", Max:2", Band: 9/16" - 51202 - 390-51202F1
Scandvik 51203 Breeze Constant-Torque® Hose Clamp, Sae:212 Min:1-1/4", Max:2-1/8", Band:5/8" - 51203 - 390-51203F1
Scandvik 51204 Breeze Constant-Torque® Hose Clamp ,Sae:262 Min:1-3/4", Max:2-5/8", Band:5/8" - 51204 - 390-51204F1
Scandvik 51205 Breeze Constant-Torque® Hose Clamp, Sae: 312 Min:2-1/4", Max:3-1/8", Band: 5/8" - 51205 - 390-51205F1
Scandvik 51206 Breeze Constant-Torque® Hose Clamp, Sae:362, Min: 2-3/4", Max:3-5/8", Band:5/8" - 51206 - 390-51206F1
Scandvik 51207 Breeze Constant-Torque® Hose Clamp, Sae:412, Min:3-1/4", Max:4-1/8", Band:5/8" - 51207 - 390-51207F1
Scandvik 51208 Breeze Constant-Torque® Hose Clamp, Sae:462 Min:3-3/4", Max:4-5/8", Band:5/8" - 51208 - 390-51208F1
Scandvik 51209 Breeze Constant-Torque® Hose Clamp, Sae:512 Min: 4-1/4", Max:5-1/8", Band:5/8" - 51209 - 390-51209F1
Scandvik 51210 Breeze Constant-Torque® Hose Clamp, Sae:562 Min:4-3/4", Max:5-5/8", Band:5/8" - 51210 - 390-51210F1
Scandvik 51211Breeze Constant-Torque® Hose Clamp, Sae:612 Min:5-1/4", Max:6-1/8", Band: 5/8" - 51211 - 390-51211F1
Scandvik 51212 Breeze Constant-Torque® Hose Clamp, Sae:662 Min:5-3/4", Max:6-5/8", Band:5/8" - 51212 - 390-51212F1
Scandvik 51213 Breeze Constant-Torque® Hose Clamp,Sae:712 Min:6-1/4", Max:7-1/8", Band:5/8" - 51213 - 390-51213F1
Scandvik 51214 Breeze Constant-Torque® Hose Clamp ,Sae:762 Min:6-3/4", Max:7-5/8", Band:5/8" - 51214 - 390-51214F1
Scandvik 51215 Breeze Constant-Torque® Hose Clamp, Sae: 812, Min:7-1/4", Max:8-1/8", Band:5/8" - 51215 - 390-51215F1
Scandvik 51216 Breeze Constant-Torque® Hose Clamp, Sae:862, Min:7-3/4", Max:8-5/8", Band:5/8" - 51216 - 390-51216F1
Scandvik 51217 Breeze Constant-Torque® Hose Clamp, Sae:912 , Min:8-1/4", Max:9-1/8", Band:5/8" - 51217 - 390-51217F1
Scandvik 51219 Breeze Constant-Torque® Hose Clamp, Sae:1112, Min:10-1/4", Max:11-1/8", Band:5/8" - 51219 - 390-51219F1
Scandvik 74122 Nordic Pull-Out Galley Mixer, Brushed Stainless Steel - 74122 - 390-74122F1
Made of durable, low maintenance passivated 304 stainless steel wiht a brushed finish. This lightweight faucet is perfect for installation for galley or bar. Does not swivel. Flexible supply lines with 1/2" NPS-F fittings. Mounting Hole: 1-1/4". Pull out sprayer connected with a 5' hose. Pull out sprayer connected with a 5' hose.
Scandvik 74130 Nordic Single Lever Galley Mixer, Brushed Stainless Steel - 74130 - 390-74130F1
Nordic single lever galley mixer with swivel spout. Passivated 304 stainless steel, with brushed finish. Flexible supply lines with 1/2" NPS-F fittings. Mounting Hole: 1-1/2".
Scandvik 74140 Nordic Stainless Steel Shower Mixer - 74140 - 390-74140F1
Nordic Stainless Steel Shower Mixer design with a front trim ring and adjustable mounting nut for easily securing to any bulkhead. Water Connection: 1/2" NPS-F 304 Stainless Steel, Brushed Finish 1-7/8" Mounting Hole
Scandvik 74180 Nordic Stainless Steel Shower Rail, 1/2" Nps-F - 74180 - 390-74180F1
Adjustable handle holder allows easy showering for all heights. Match with our stainless steel brushed bulkhead elbow #74165 to professionally route the plumbing behind the bulkhead. Water Connection: 1/2" NPS-F Material: 304 Stainless Steel, Brushed FinishShower Handle: 7-3/4" Long Stainless SteelHose: 6' Stainless Steel30-5/8" H. 1" dia. tube.
Scandvik Aba 304 Stainless Steel Mini Clamps, Size 10 - 13510 - 390-13510F1
Constructed from all 304 stainless steel, the Mini Clamp can really hold its own. With very capable older brothers, the Mini Clamp lives up to all expectations. The lug for the screw and nut must be stable enough to resist deformation whenever the nut is tightened. This is why they are made of cold rolled strip stainless steel to Swedish Standard SS 1265. The band and screw are 304 stainless steel to withstand a more corrosive marine environment. To prevent the band tongue underneath from being deformed and causing leakage, it is designed with a formed section. The nut is retained in the lug, even when the screw has been removed. Another practical detail is the hexagonal screw head, which may be tightened using the ABA flexible driver. This was the starting point in designing the ABA Mini Clamp. As a result, the Mini features several well-known ABA characteristics including the rounded edges that ensure the clamp grips the hose firmly but gently. Hex head screw 7mm (9/32") across flats. Band Width: 9mm (3/8").
Scandvik Aba 304 Stainless Steel Mini Clamps, Size 11 - 13511 - 390-13511F1
Constructed from all 304 stainless steel, the Mini Clamp can really hold its own. With very capable older brothers, the Mini Clamp lives up to all expectations. The lug for the screw and nut must be stable enough to resist deformation whenever the nut is tightened. This is why they are made of cold rolled strip stainless steel to Swedish Standard SS 1265. The band and screw are 304 stainless steel to withstand a more corrosive marine environment. To prevent the band tongue underneath from being deformed and causing leakage, it is designed with a formed section. The nut is retained in the lug, even when the screw has been removed. Another practical detail is the hexagonal screw head, which may be tightened using the ABA flexible driver. This was the starting point in designing the ABA Mini Clamp. As a result, the Mini features several well-known ABA characteristics including the rounded edges that ensure the clamp grips the hose firmly but gently. Hex head screw 7mm (9/32") across flats. Band Width: 9mm (3/8").
Scandvik Aba 304 Stainless Steel Mini Clamps, Size 12 - 13512 - 390-13512F1
Constructed from all 304 stainless steel, the Mini Clamp can really hold its own. With very capable older brothers, the Mini Clamp lives up to all expectations. The lug for the screw and nut must be stable enough to resist deformation whenever the nut is tightened. This is why they are made of cold rolled strip stainless steel to Swedish Standard SS 1265. The band and screw are 304 stainless steel to withstand a more corrosive marine environment. To prevent the band tongue underneath from being deformed and causing leakage, it is designed with a formed section. The nut is retained in the lug, even when the screw has been removed. Another practical detail is the hexagonal screw head, which may be tightened using the ABA flexible driver. This was the starting point in designing the ABA Mini Clamp. As a result, the Mini features several well-known ABA characteristics including the rounded edges that ensure the clamp grips the hose firmly but gently. Hex head screw 7mm (9/32") across flats. Band Width: 9mm (3/8").
Scandvik Aba 304 Stainless Steel Mini Clamps, Size 13 - 13513 - 390-13513F1
Constructed from all 304 stainless steel, the Mini Clamp can really hold its own. With very capable older brothers, the Mini Clamp lives up to all expectations. The lug for the screw and nut must be stable enough to resist deformation whenever the nut is tightened. This is why they are made of cold rolled strip stainless steel to Swedish Standard SS 1265. The band and screw are 304 stainless steel to withstand a more corrosive marine environment. To prevent the band tongue underneath from being deformed and causing leakage, it is designed with a formed section. The nut is retained in the lug, even when the screw has been removed. Another practical detail is the hexagonal screw head, which may be tightened using the ABA flexible driver. This was the starting point in designing the ABA Mini Clamp. As a result, the Mini features several well-known ABA characteristics including the rounded edges that ensure the clamp grips the hose firmly but gently. Hex head screw 7mm (9/32") across flats. Band Width: 9mm (3/8").
Scandvik Aba 304 Stainless Steel Mini Clamps, Size 14 - 13514 - 390-13514F1
Constructed from all 304 stainless steel, the Mini Clamp can really hold its own. With very capable older brothers, the Mini Clamp lives up to all expectations. The lug for the screw and nut must be stable enough to resist deformation whenever the nut is tightened. This is why they are made of cold rolled strip stainless steel to Swedish Standard SS 1265. The band and screw are 304 stainless steel to withstand a more corrosive marine environment. To prevent the band tongue underneath from being deformed and causing leakage, it is designed with a formed section. The nut is retained in the lug, even when the screw has been removed. Another practical detail is the hexagonal screw head, which may be tightened using the ABA flexible driver. This was the starting point in designing the ABA Mini Clamp. As a result, the Mini features several well-known ABA characteristics including the rounded edges that ensure the clamp grips the hose firmly but gently. Hex head screw 7mm (9/32") across flats. Band Width: 9mm (3/8").
Scandvik Aba 304 Stainless Steel Mini Clamps, Size 15 - 13515 - 390-13515F1
Constructed from all 304 stainless steel, the Mini Clamp can really hold its own. With very capable older brothers, the Mini Clamp lives up to all expectations. The lug for the screw and nut must be stable enough to resist deformation whenever the nut is tightened. This is why they are made of cold rolled strip stainless steel to Swedish Standard SS 1265. The band and screw are 304 stainless steel to withstand a more corrosive marine environment. To prevent the band tongue underneath from being deformed and causing leakage, it is designed with a formed section. The nut is retained in the lug, even when the screw has been removed. Another practical detail is the hexagonal screw head, which may be tightened using the ABA flexible driver. This was the starting point in designing the ABA Mini Clamp. As a result, the Mini features several well-known ABA characteristics including the rounded edges that ensure the clamp grips the hose firmly but gently. Hex head screw 7mm (9/32") across flats. Band Width: 9mm (3/8").
Scandvik Aba 304 Stainless Steel Mini Clamps, Size 16 - 13516 - 390-13516F1
Constructed from all 304 stainless steel, the Mini Clamp can really hold its own. With very capable older brothers, the Mini Clamp lives up to all expectations. The lug for the screw and nut must be stable enough to resist deformation whenever the nut is tightened. This is why they are made of cold rolled strip stainless steel to Swedish Standard SS 1265. The band and screw are 304 stainless steel to withstand a more corrosive marine environment. To prevent the band tongue underneath from being deformed and causing leakage, it is designed with a formed section. The nut is retained in the lug, even when the screw has been removed. Another practical detail is the hexagonal screw head, which may be tightened using the ABA flexible driver. This was the starting point in designing the ABA Mini Clamp. As a result, the Mini features several well-known ABA characteristics including the rounded edges that ensure the clamp grips the hose firmly but gently. Hex head screw 7mm (9/32") across flats. Band Width: 9mm (3/8").
Scandvik Aba 304 Stainless Steel Mini Clamps, Size 17 - 13517 - 390-13517F1
Constructed from all 304 stainless steel, the Mini Clamp can really hold its own. With very capable older brothers, the Mini Clamp lives up to all expectations. The lug for the screw and nut must be stable enough to resist deformation whenever the nut is tightened. This is why they are made of cold rolled strip stainless steel to Swedish Standard SS 1265. The band and screw are 304 stainless steel to withstand a more corrosive marine environment. To prevent the band tongue underneath from being deformed and causing leakage, it is designed with a formed section. The nut is retained in the lug, even when the screw has been removed. Another practical detail is the hexagonal screw head, which may be tightened using the ABA flexible driver. This was the starting point in designing the ABA Mini Clamp. As a result, the Mini features several well-known ABA characteristics including the rounded edges that ensure the clamp grips the hose firmly but gently. Hex head screw 7mm (9/32") across flats. Band Width: 9mm (3/8").
Scandvik Aba 304 Stainless Steel Mini Clamps, Size 8 - 13508 - 390-13508F1
Constructed from all 304 stainless steel, the Mini Clamp can really hold its own. With very capable older brothers, the Mini Clamp lives up to all expectations. The lug for the screw and nut must be stable enough to resist deformation whenever the nut is tightened. This is why they are made of cold rolled strip stainless steel to Swedish Standard SS 1265. The band and screw are 304 stainless steel to withstand a more corrosive marine environment. To prevent the band tongue underneath from being deformed and causing leakage, it is designed with a formed section. The nut is retained in the lug, even when the screw has been removed. Another practical detail is the hexagonal screw head, which may be tightened using the ABA flexible driver. This was the starting point in designing the ABA Mini Clamp. As a result, the Mini features several well-known ABA characteristics including the rounded edges that ensure the clamp grips the hose firmly but gently. Hex head screw 7mm (9/32") across flats. Band Width: 9mm (3/8").
Scandvik Aba 304 Stainless Steel Mini Clamps, Size 9 - 13509 - 390-13509F1
Constructed from all 304 stainless steel, the Mini Clamp can really hold its own. With very capable older brothers, the Mini Clamp lives up to all expectations. The lug for the screw and nut must be stable enough to resist deformation whenever the nut is tightened. This is why they are made of cold rolled strip stainless steel to Swedish Standard SS 1265. The band and screw are 304 stainless steel to withstand a more corrosive marine environment. To prevent the band tongue underneath from being deformed and causing leakage, it is designed with a formed section. The nut is retained in the lug, even when the screw has been removed. Another practical detail is the hexagonal screw head, which may be tightened using the ABA flexible driver. This was the starting point in designing the ABA Mini Clamp. As a result, the Mini features several well-known ABA characteristics including the rounded edges that ensure the clamp grips the hose firmly but gently. Hex head screw 7mm (9/32") across flats. Band Width: 9mm (3/8").
Scandvik Aba Flexible Hose Clamp Nut Driver, 10" - 60002 - 390-60002F1
This flexible nut driver, always found in the standard kits of ABA stainless steel hose clamp nuts, is so popular that Scandvik now offers it separately. Its sturdy, flexible shaft allows a 90-degree angle. Using the ABA flexible nutdriver you can even reach around corners without slipping. It is even prefitted with a 9/32" (7mm) hex driver so no further need to hunt for the right size socket. Fits ABA original series and mini clampsFeatures 9/32" (7mm) hex drive attachment
Scandvik Aba Flexible Hose Clamp Nut Driver, 24" - 60003 - 390-60003F1
This flexible nut driver, always found in the standard kits of ABA stainless steel hose clamp nuts, is so popular that Scandvik now offers it separately. Its sturdy, flexible shaft allows a 90-degree angle. Using the ABA flexible nutdriver you can even reach around corners without slipping. It is even prefitted with a 9/32" (7mm) hex driver so no further need to hunt for the right size socket. Fits ABA original series and mini clampsFeatures 9/32" (7mm) hex drive attachment
Scandvik Clamp Tail Sleeves, 1/2", 100/Pk - 31612P - 390-31612Pf1
Dress up your engine room and protect yourself from cuts and scratches caused by hose clamp tails. Clamp tail sleeves slide onto the bare end of the tail.
Scandvik Clamp Tail Sleeves, 1/2", 25/Pk - 31611P - 390-31611Pf1
Dress up your engine room and protect yourself from cuts and scratches caused by hose clamp tails. Clamp tail sleeves slide onto the bare end of the tail.
Scandvik Clamp Tail Sleeves, 5/16", 100/Pk - 31602P - 390-31602Pf1
Dress up your engine room and protect yourself from cuts and scratches caused by hose clamp tails. Clamp tail sleeves slide onto the bare end of the tail.
Scandvik Clamp Tail Sleeves, 5/16", 25/Pk - 31601P - 390-31601Pf1
Dress up your engine room and protect yourself from cuts and scratches caused by hose clamp tails. Clamp tail sleeves slide onto the bare end of the tail.
Scandvik Euro Shower Kit, White Sprayer With White Hose And Triangle Knobs - 14117 - 390-14117F1
Shower kit with mixing bridge, "Euro" style shower handle, and nylon hose. Chrome brass body with chromed plastic knobs. Shower white plastic handle. 6' white nylon hose. 3/8" male BSP thread and 1/2" NPT adapter.
Scandvik Euro Sprayer With 6' Nylon Hose - 14031 - 390-14031F1
All units can be locked in the on position for continuous flow or just push the trigger for manual control. Plastic sprayer handle, 3/8" female BSP thread. Kits include 6' color matched hose.
Scandvik Euro Sprayer With 6' Nylon Hose - 14032 - 390-14032F1
All units can be locked in the on position for continuous flow or just push the trigger for manual control. Plastic sprayer handle, 3/8" female BSP thread. Kits include 6' color matched hose.
Scandvik G4 Bi-Pin Socket Adapter, Ba15 To G4 - 41120P - 390-41120Pf1
Make your LED light bulb replacement a smooth transition with this adapter.Replacing your halogen and incandescent bulbs just became easier with more options, better choices & smarter solutions.The G4 Socket inside the BA15 Adapter rotates up to 120° to provide the proper LED bulb orientation inside the light fixture. MR-16 Base also fits into G4 socket adapters.
Scandvik G4 Bi-Pin Socket Adapter, Ba15S To G4 - 41121P - 390-41121Pf1
Make your LED light bulb replacement a smooth transition with this adapter.Replacing your halogen and incandescent bulbs just became easier with more options, better choices & smarter solutions.The G4 Socket inside the BA15 Adapter rotates up to 120° to provide the proper LED bulb orientation inside the light fixture. MR-16 Base also fits into G4 socket adapters.
Scandvik G4 Bi-Pin Socket Adapter, E27 To G4 - 41122P - 390-41122Pf1
Make your LED light bulb replacement a smooth transition with this adapter.Replacing your halogen and incandescent bulbs just became easier with more options, better choices & smarter solutions.The G4 Socket inside the BA15 Adapter rotates up to 120° to provide the proper LED bulb orientation inside the light fixture. MR-16 Base also fits into G4 socket adapters.
Scandvik Heavy Duty 316 Stainless Steel Gbs Clamp - 67000 - 390-67000F1
Heavy Duty low profile bolt clamps. Particularly suited for sealing exhaust, pressure or suction lines with plastic or steel inserts and high shore hardness values. They feature an extremely high band tensile force. Easy assembly with standard manual, pneumatic or electric tools 6mm hexagonal socket screw with integrated spacerReinforced loops withstand significantly higher torquesRobust band with rounded edgesMechanically locked closure- no welding points, no contact corrosion
Scandvik Heavy Duty 316 Stainless Steel Gbs Clamp - 67002 - 390-67002F1
Heavy Duty low profile bolt clamps. Particularly suited for sealing exhaust, pressure or suction lines with plastic or steel inserts and high shore hardness values. They feature an extremely high band tensile force. Easy assembly with standard manual, pneumatic or electric tools 6mm hexagonal socket screw with integrated spacerReinforced loops withstand significantly higher torquesRobust band with rounded edgesMechanically locked closure- no welding points, no contact corrosion
Scandvik Heavy Duty 316 Stainless Steel Gbs Clamp - 67003 - 390-67003F1
Heavy Duty low profile bolt clamps. Particularly suited for sealing exhaust, pressure or suction lines with plastic or steel inserts and high shore hardness values. They feature an extremely high band tensile force. Easy assembly with standard manual, pneumatic or electric tools 6mm hexagonal socket screw with integrated spacerReinforced loops withstand significantly higher torquesRobust band with rounded edgesMechanically locked closure- no welding points, no contact corrosion
Scandvik Heavy Duty 316 Stainless Steel Gbs Clamp - 67004 - 390-67004F1
Heavy Duty low profile bolt clamps. Particularly suited for sealing exhaust, pressure or suction lines with plastic or steel inserts and high shore hardness values. They feature an extremely high band tensile force. Easy assembly with standard manual, pneumatic or electric tools 6mm hexagonal socket screw with integrated spacerReinforced loops withstand significantly higher torquesRobust band with rounded edgesMechanically locked closure- no welding points, no contact corrosion
Scandvik Heavy Duty 316 Stainless Steel Gbs Clamp - 67005 - 390-67005F1
Heavy Duty low profile bolt clamps. Particularly suited for sealing exhaust, pressure or suction lines with plastic or steel inserts and high shore hardness values. They feature an extremely high band tensile force. Easy assembly with standard manual, pneumatic or electric tools 6mm hexagonal socket screw with integrated spacerReinforced loops withstand significantly higher torquesRobust band with rounded edgesMechanically locked closure- no welding points, no contact corrosion
Scandvik Heavy Duty 316 Stainless Steel Gbs Clamp - 67006 - 390-67006F1
Heavy Duty low profile bolt clamps. Particularly suited for sealing exhaust, pressure or suction lines with plastic or steel inserts and high shore hardness values. They feature an extremely high band tensile force. Easy assembly with standard manual, pneumatic or electric tools 6mm hexagonal socket screw with integrated spacerReinforced loops withstand significantly higher torquesRobust band with rounded edgesMechanically locked closure- no welding points, no contact corrosion
Scandvik Heavy Duty 316 Stainless Steel Gbs Clamp - 67007 - 390-67007F1
Heavy Duty low profile bolt clamps. Particularly suited for sealing exhaust, pressure or suction lines with plastic or steel inserts and high shore hardness values. They feature an extremely high band tensile force. Easy assembly with standard manual, pneumatic or electric tools 6mm hexagonal socket screw with integrated spacerReinforced loops withstand significantly higher torquesRobust band with rounded edgesMechanically locked closure- no welding points, no contact corrosion
Scandvik Heavy Duty 316 Stainless Steel Gbs Clamp - 67008 - 390-67008F1
Heavy Duty low profile bolt clamps. Particularly suited for sealing exhaust, pressure or suction lines with plastic or steel inserts and high shore hardness values. They feature an extremely high band tensile force. Easy assembly with standard manual, pneumatic or electric tools 6mm hexagonal socket screw with integrated spacerReinforced loops withstand significantly higher torquesRobust band with rounded edgesMechanically locked closure- no welding points, no contact corrosion
Scandvik Heavy Duty 316 Stainless Steel Gbs Clamp - 67009 - 390-67009F1
Heavy Duty low profile bolt clamps. Particularly suited for sealing exhaust, pressure or suction lines with plastic or steel inserts and high shore hardness values. They feature an extremely high band tensile force. Easy assembly with standard manual, pneumatic or electric tools 6mm hexagonal socket screw with integrated spacerReinforced loops withstand significantly higher torquesRobust band with rounded edgesMechanically locked closure- no welding points, no contact corrosion
Scandvik Heavy Duty 316 Stainless Steel Gbs Clamp - 67010 - 390-67010F1
Heavy Duty low profile bolt clamps. Particularly suited for sealing exhaust, pressure or suction lines with plastic or steel inserts and high shore hardness values. They feature an extremely high band tensile force. Easy assembly with standard manual, pneumatic or electric tools 6mm hexagonal socket screw with integrated spacerReinforced loops withstand significantly higher torquesRobust band with rounded edgesMechanically locked closure- no welding points, no contact corrosion
Scandvik Heavy Duty 316 Stainless Steel Gbs Clamp - 67011 - 390-67011F1
Heavy Duty low profile bolt clamps. Particularly suited for sealing exhaust, pressure or suction lines with plastic or steel inserts and high shore hardness values. They feature an extremely high band tensile force. Easy assembly with standard manual, pneumatic or electric tools 6mm hexagonal socket screw with integrated spacerReinforced loops withstand significantly higher torquesRobust band with rounded edgesMechanically locked closure- no welding points, no contact corrosion
Scandvik Heavy Duty 316 Stainless Steel Gbs Clamp - 67012 - 390-67012F1
Heavy Duty low profile bolt clamps. Particularly suited for sealing exhaust, pressure or suction lines with plastic or steel inserts and high shore hardness values. They feature an extremely high band tensile force. Easy assembly with standard manual, pneumatic or electric tools 6mm hexagonal socket screw with integrated spacerReinforced loops withstand significantly higher torquesRobust band with rounded edgesMechanically locked closure- no welding points, no contact corrosion
Scandvik Heavy Duty 316 Stainless Steel Gbs Clamp - 67013 - 390-67013F1
Heavy Duty low profile bolt clamps. Particularly suited for sealing exhaust, pressure or suction lines with plastic or steel inserts and high shore hardness values. They feature an extremely high band tensile force. Easy assembly with standard manual, pneumatic or electric tools 6mm hexagonal socket screw with integrated spacerReinforced loops withstand significantly higher torquesRobust band with rounded edgesMechanically locked closure- no welding points, no contact corrosion
Scandvik Heavy Duty 316 Stainless Steel Gbs Clamp - 67014 - 390-67014F1
Heavy Duty low profile bolt clamps. Particularly suited for sealing exhaust, pressure or suction lines with plastic or steel inserts and high shore hardness values. They feature an extremely high band tensile force. Easy assembly with standard manual, pneumatic or electric tools 6mm hexagonal socket screw with integrated spacerReinforced loops withstand significantly higher torquesRobust band with rounded edgesMechanically locked closure- no welding points, no contact corrosion
Scandvik Heavy Duty 316 Stainless Steel Gbs Clamp - 67015 - 390-67015F1
Heavy Duty low profile bolt clamps. Particularly suited for sealing exhaust, pressure or suction lines with plastic or steel inserts and high shore hardness values. They feature an extremely high band tensile force. Easy assembly with standard manual, pneumatic or electric tools 6mm hexagonal socket screw with integrated spacerReinforced loops withstand significantly higher torquesRobust band with rounded edgesMechanically locked closure- no welding points, no contact corrosion
Scandvik Heavy Duty 316 Stainless Steel Gbs Clamp - 67016 - 390-67016F1
Heavy Duty low profile bolt clamps. Particularly suited for sealing exhaust, pressure or suction lines with plastic or steel inserts and high shore hardness values. They feature an extremely high band tensile force. Easy assembly with standard manual, pneumatic or electric tools 6mm hexagonal socket screw with integrated spacerReinforced loops withstand significantly higher torquesRobust band with rounded edgesMechanically locked closure- no welding points, no contact corrosion
Scandvik Heavy Duty 316 Stainless Steel Gbs Clamp - 67017 - 390-67017F1
Heavy Duty low profile bolt clamps. Particularly suited for sealing exhaust, pressure or suction lines with plastic or steel inserts and high shore hardness values. They feature an extremely high band tensile force. Easy assembly with standard manual, pneumatic or electric tools 6mm hexagonal socket screw with integrated spacerReinforced loops withstand significantly higher torquesRobust band with rounded edgesMechanically locked closure- no welding points, no contact corrosion
Scandvik Heavy Duty 316 Stainless Steel Gbs Clamp - 67018 - 390-67018F1
Heavy Duty low profile bolt clamps. Particularly suited for sealing exhaust, pressure or suction lines with plastic or steel inserts and high shore hardness values. They feature an extremely high band tensile force. Easy assembly with standard manual, pneumatic or electric tools 6mm hexagonal socket screw with integrated spacerReinforced loops withstand significantly higher torquesRobust band with rounded edgesMechanically locked closure- no welding points, no contact corrosion
Scandvik Heavy Duty 316 Stainless Steel Gbs Clamp - 67019 - 390-67019F1
Heavy Duty low profile bolt clamps. Particularly suited for sealing exhaust, pressure or suction lines with plastic or steel inserts and high shore hardness values. They feature an extremely high band tensile force. Easy assembly with standard manual, pneumatic or electric tools 6mm hexagonal socket screw with integrated spacerReinforced loops withstand significantly higher torquesRobust band with rounded edgesMechanically locked closure- no welding points, no contact corrosion
Scandvik Heavy Duty 316 Stainless Steel Gbs Clamp - 67020 - 390-67020F1
Heavy Duty low profile bolt clamps. Particularly suited for sealing exhaust, pressure or suction lines with plastic or steel inserts and high shore hardness values. They feature an extremely high band tensile force. Easy assembly with standard manual, pneumatic or electric tools 6mm hexagonal socket screw with integrated spacerReinforced loops withstand significantly higher torquesRobust band with rounded edgesMechanically locked closure- no welding points, no contact corrosion
Scandvik Heavy Duty 316 Stainless Steel Gbs Clamp - 67022 - 390-67022F1
Heavy Duty low profile bolt clamps. Particularly suited for sealing exhaust, pressure or suction lines with plastic or steel inserts and high shore hardness values. They feature an extremely high band tensile force. Easy assembly with standard manual, pneumatic or electric tools 6mm hexagonal socket screw with integrated spacerReinforced loops withstand significantly higher torquesRobust band with rounded edgesMechanically locked closure- no welding points, no contact corrosion
Scandvik Heavy Duty 316 Stainless Steel Gbs Clamp - 67023 - 390-67023F1
Heavy Duty low profile bolt clamps. Particularly suited for sealing exhaust, pressure or suction lines with plastic or steel inserts and high shore hardness values. They feature an extremely high band tensile force. Easy assembly with standard manual, pneumatic or electric tools 6mm hexagonal socket screw with integrated spacerReinforced loops withstand significantly higher torquesRobust band with rounded edgesMechanically locked closure- no welding points, no contact corrosion
Scandvik Heavy Duty 316 Stainless Steel Gbs Clamp - 67024 - 390-67024F1
Heavy Duty low profile bolt clamps. Particularly suited for sealing exhaust, pressure or suction lines with plastic or steel inserts and high shore hardness values. They feature an extremely high band tensile force. Easy assembly with standard manual, pneumatic or electric tools 6mm hexagonal socket screw with integrated spacerReinforced loops withstand significantly higher torquesRobust band with rounded edgesMechanically locked closure- no welding points, no contact corrosion
Scandvik Heavy Duty 316 Stainless Steel Gbs Clamp - 67025 - 390-67025F1
Heavy Duty low profile bolt clamps. Particularly suited for sealing exhaust, pressure or suction lines with plastic or steel inserts and high shore hardness values. They feature an extremely high band tensile force. Easy assembly with standard manual, pneumatic or electric tools 6mm hexagonal socket screw with integrated spacerReinforced loops withstand significantly higher torquesRobust band with rounded edgesMechanically locked closure- no welding points, no contact corrosion
Scandvik Heavy Duty 316 Stainless Steel Gbs Clamp - 67026 - 390-67026F1
Heavy Duty low profile bolt clamps. Particularly suited for sealing exhaust, pressure or suction lines with plastic or steel inserts and high shore hardness values. They feature an extremely high band tensile force. Easy assembly with standard manual, pneumatic or electric tools 6mm hexagonal socket screw with integrated spacerReinforced loops withstand significantly higher torquesRobust band with rounded edgesMechanically locked closure- no welding points, no contact corrosion
Scandvik Heavy Duty 316 Stainless Steel Gbs Clamp - 67027 - 390-67027F1
Heavy Duty low profile bolt clamps. Particularly suited for sealing exhaust, pressure or suction lines with plastic or steel inserts and high shore hardness values. They feature an extremely high band tensile force. Easy assembly with standard manual, pneumatic or electric tools 6mm hexagonal socket screw with integrated spacerReinforced loops withstand significantly higher torquesRobust band with rounded edgesMechanically locked closure- no welding points, no contact corrosion
Scandvik Heavy Duty 316 Stainless Steel Gbs Clamp - 67028 - 390-67028F1
Heavy Duty low profile bolt clamps. Particularly suited for sealing exhaust, pressure or suction lines with plastic or steel inserts and high shore hardness values. They feature an extremely high band tensile force. Easy assembly with standard manual, pneumatic or electric tools 6mm hexagonal socket screw with integrated spacerReinforced loops withstand significantly higher torquesRobust band with rounded edgesMechanically locked closure- no welding points, no contact corrosion
Scandvik Heavy Duty 316 Stainless Steel Gbs Clamp - 67029 - 390-67029F1
Heavy Duty low profile bolt clamps. Particularly suited for sealing exhaust, pressure or suction lines with plastic or steel inserts and high shore hardness values. They feature an extremely high band tensile force. Easy assembly with standard manual, pneumatic or electric tools 6mm hexagonal socket screw with integrated spacerReinforced loops withstand significantly higher torquesRobust band with rounded edgesMechanically locked closure- no welding points, no contact corrosion
Scandvik Heavy Duty 316 Stainless Steel Gbs Clamp - 67030 - 390-67030F1
Heavy Duty low profile bolt clamps. Particularly suited for sealing exhaust, pressure or suction lines with plastic or steel inserts and high shore hardness values. They feature an extremely high band tensile force. Easy assembly with standard manual, pneumatic or electric tools 6mm hexagonal socket screw with integrated spacerReinforced loops withstand significantly higher torquesRobust band with rounded edgesMechanically locked closure- no welding points, no contact corrosion
Scandvik Heavy Duty 316 Stainless Steel Gbs Clamp - 67031 - 390-67031F1
Heavy Duty low profile bolt clamps. Particularly suited for sealing exhaust, pressure or suction lines with plastic or steel inserts and high shore hardness values. They feature an extremely high band tensile force. Easy assembly with standard manual, pneumatic or electric tools 6mm hexagonal socket screw with integrated spacerReinforced loops withstand significantly higher torquesRobust band with rounded edgesMechanically locked closure- no welding points, no contact corrosion
Scandvik Heavy Duty 316 Stainless Steel Gbs Clamp - 67032 - 390-67032F1
Heavy Duty low profile bolt clamps. Particularly suited for sealing exhaust, pressure or suction lines with plastic or steel inserts and high shore hardness values. They feature an extremely high band tensile force. Easy assembly with standard manual, pneumatic or electric tools 6mm hexagonal socket screw with integrated spacerReinforced loops withstand significantly higher torquesRobust band with rounded edgesMechanically locked closure- no welding points, no contact corrosion
Scandvik Heavy Duty 316 Stainless Steel Gbs Clamp - 67033 - 390-67033F1
Heavy Duty low profile bolt clamps. Particularly suited for sealing exhaust, pressure or suction lines with plastic or steel inserts and high shore hardness values. They feature an extremely high band tensile force. Easy assembly with standard manual, pneumatic or electric tools 6mm hexagonal socket screw with integrated spacerReinforced loops withstand significantly higher torquesRobust band with rounded edgesMechanically locked closure- no welding points, no contact corrosion
Scandvik Heavy Duty 316 Stainless Steel Gbs Clamp - 67034 - 390-67034F1
Heavy Duty low profile bolt clamps. Particularly suited for sealing exhaust, pressure or suction lines with plastic or steel inserts and high shore hardness values. They feature an extremely high band tensile force. Easy assembly with standard manual, pneumatic or electric tools 6mm hexagonal socket screw with integrated spacerReinforced loops withstand significantly higher torquesRobust band with rounded edgesMechanically locked closure- no welding points, no contact corrosion
Scandvik Heavy Duty 316 Stainless Steel Gbs Clamp - 67035 - 390-67035F1
Heavy Duty low profile bolt clamps. Particularly suited for sealing exhaust, pressure or suction lines with plastic or steel inserts and high shore hardness values. They feature an extremely high band tensile force. Easy assembly with standard manual, pneumatic or electric tools 6mm hexagonal socket screw with integrated spacerReinforced loops withstand significantly higher torquesRobust band with rounded edgesMechanically locked closure- no welding points, no contact corrosion
Scandvik Heavy Duty 316 Stainless Steel Gbs Clamp - 67036 - 390-67036F1
Heavy Duty low profile bolt clamps. Particularly suited for sealing exhaust, pressure or suction lines with plastic or steel inserts and high shore hardness values. They feature an extremely high band tensile force. Easy assembly with standard manual, pneumatic or electric tools 6mm hexagonal socket screw with integrated spacerReinforced loops withstand significantly higher torquesRobust band with rounded edgesMechanically locked closure- no welding points, no contact corrosion
Scandvik Heavy Duty 316 Stainless Steel Gbs Clamp - 67037 - 390-67037F1
Heavy Duty low profile bolt clamps. Particularly suited for sealing exhaust, pressure or suction lines with plastic or steel inserts and high shore hardness values. They feature an extremely high band tensile force. Easy assembly with standard manual, pneumatic or electric tools 6mm hexagonal socket screw with integrated spacerReinforced loops withstand significantly higher torquesRobust band with rounded edgesMechanically locked closure- no welding points, no contact corrosion
Scandvik Nordic Stainless Steel Basin Mixer - 74103 - 390-74103F1
Made of durable, low maintenance Passivated 304 Stainless Steel. This light weight faucet is perfect for installation on flybridge or aft cockpit locations. Does not swivel. Water connection: flexible supply lines with 1/2" NPS-F fittings. Material: passivated 304 stainless steel, brushed finish. Mounting hole: 1-1/4".
Scandvik Nordic Stainless Steel Basin Mixer - 74121 - 390-74121F1
Made of durable, low maintenance Passivated 304 Stainless Steel. This light weight faucet is perfect for installation for galley or bar. Does not swivel. Water connection: flexible supply lines with 1/2" NPS-F fittings. Material: passivated 304 stainless steel, brushed finish. Mounting hole: 1-1/4".
Scandvik Nordic Stainless Steel Cold Water J-Tap - 74107 - 390-74107F1
Made of durable, low maintenance Passivated 304 Stainless Steel. This light weight cold water tap is perfect for installation on flybridge or aft cockpit locations. Water Connection 1/2" NPS Male fitting. Material passivated 304 stainless steel, brush finish. Mounting hole 7/8".
Scandvik Nordic Stainless Steel Cold Water Tap - 74106 - 390-74106F1
Made of durable, low maintenance Passivated 304 Stainless Steel. This light weight cold water tap is perfect for installation on flybridge or aft cockpit locations. Water Connection 1/2" NPS Male fitting. Material passivated 304 stainless steel, brush finish. Mounting hole 7/8".
Scandvik Stainless Steel Sink, Top Mount - 10201 - 390-10201F1
Round. Mirror finished 304 stainless steel. Drain opening: 2-3/16"Edge profile A -above counter. (All flanges can be installed below counter). Mirror Finish basins are not recommended for exterior use due to the reflective nature of the polished stainless steel.
Scandvik Standard Straight Sprayer With 6' Nylon Hose - 10054P - 390-10054Pf1
These reliable composite showers have an on/off trigger or flip up for continuous water flow. 1-1/16" Mounting hole. 3/8" BSB thread. Kits include 6' color matched hose and counter top holder and 3/8-1/2 NPT male adaptor.
Scandvik Standard Straight Sprayer With 6' Nylon Hose - 10196P - 390-10196Pf1
These reliable composite showers have an on/off trigger or flip up for continuous water flow. 1-1/16" Mounting hole. 3/8" BSB thread. Kits include 6' color matched hose and counter top holder and 3/8-1/2 NPT male adaptor.
Scanstrut 1" Stainless Steel Rail Mount - Ra-01 - 922-Ra01F1
Rail mount for a single GPS / VHF antenna. Can be fitted to rails of 1" in diameter and comes with a watertight seal for additional protection against exposure to the sea. Allows for internal cable routing to ensure a neat installation.
Scanstrut Mast Mount Adapter Kit - 50100 - 922-50100F1
For masts with an integral track at the front which makes it difficult to fit a Scanstrut mast mount. Fits all Scanstrut Mast Mounts. Compatible with Z-Spars, Selden, Isomat, Eurospars Masts. Marine grade 6082 aluminum, polyester powder coated for a durable, gloss white finish.
Scanstrut Rls508401 Rokk Mini Mount - Tablet Clamp Kit, Fixed Surface Mount - Rls-508-401 - 922-Rls508401F1
The ROKK mini universal mounting kit is the toughest mounting system for your device. The hi-performance ROKK mini modular system allows you to attach your electronics to boats, cars, off-road vehicles, aircraft and more. Move your electronics conveniently between different types of base mounts in different locations in one easy click. Want to unlock multiple mounting options in different locations or simply mount a different electronic device? Just add another top or base to your modular kit to extend the possibilities of your ROKK mini starter kit.Kit Includes: Universal ClampAdjustable BodyMount
Scanstrut Rls508402 Rokk Mini Mount - Tablet Clamp Kit, Rail Mount - Rls-508-402 - 922-Rls508402F1
The ROKK mini universal mounting kit is the toughest mounting system for your device. The hi-performance ROKK mini modular system allows you to attach your electronics to boats, cars, off-road vehicles, aircraft and more. Move your electronics conveniently between different types of base mounts in different locations in one easy click. Want to unlock multiple mounting options in different locations or simply mount a different electronic device? Just add another top or base to your modular kit to extend the possibilities of your ROKK mini starter kit.Kit Includes: Universal ClampAdjustable BodyMount
Scanstrut Rls508404 Rokk Mini Mount - Tablet Clamp Kit, Self Adhesive Surface Mount - Rls-508-404 - 922-Rls508404F1
The ROKK mini universal mounting kit is the toughest mounting system for your device. The hi-performance ROKK mini modular system allows you to attach your electronics to boats, cars, off-road vehicles, aircraft and more. Move your electronics conveniently between different types of base mounts in different locations in one easy click. Want to unlock multiple mounting options in different locations or simply mount a different electronic device? Just add another top or base to your modular kit to extend the possibilities of your ROKK mini starter kit.Kit Includes: Universal ClampAdjustable BodyMount
Scanstrut Rls508405 Rokk Mini Mount - Tablet Clamp Kit, Suction Cup Mount - Rls-508-405 - 922-Rls508405F1
The ROKK mini universal mounting kit is the toughest mounting system for your device. The hi-performance ROKK mini modular system allows you to attach your electronics to boats, cars, off-road vehicles, aircraft and more. Move your electronics conveniently between different types of base mounts in different locations in one easy click. Want to unlock multiple mounting options in different locations or simply mount a different electronic device? Just add another top or base to your modular kit to extend the possibilities of your ROKK mini starter kit.Kit Includes: Universal ClampAdjustable BodyMount
Scanstrut Rls509401 Rokk Mini Mount - Cell Phone Clamp Kit, Fixed Surface Mount - Rls-509-401 - 922-Rls509401F1
The ROKK mini universal mounting kit is the toughest mounting system for your device. The hi-performance ROKK mini modular system allows you to attach your electronics to boats, cars, off-road vehicles, aircraft and more. Move your electronics conveniently between different types of base mounts in different locations in one easy click. Want to unlock multiple mounting options in different locations or simply mount a different electronic device? Just add another top or base to your modular kit to extend the possibilities of your ROKK mini starter kit.Kit Includes: Universal ClampAdjustable BodyMount
Scanstrut Rls509402 Rokk Mini Mount - Cell Phone Clamp Kit, Rail Mount - - 922-Rls509402F1
The ROKK mini universal mounting kit is the toughest mounting system for your device. The hi-performance ROKK mini modular system allows you to attach your electronics to boats, cars, off-road vehicles, aircraft and more. Move your electronics conveniently between different types of base mounts in different locations in one easy click. Want to unlock multiple mounting options in different locations or simply mount a different electronic device? Just add another top or base to your modular kit to extend the possibilities of your ROKK mini starter kit.Kit Includes: Universal ClampAdjustable BodyMount
Scanstrut Rls509404 Rokk Mini Mount - Cell Phone Clamp Kit, Self Adhesive Surface Mount - - 922-Rls509404F1
The ROKK mini universal mounting kit is the toughest mounting system for your device. The hi-performance ROKK mini modular system allows you to attach your electronics to boats, cars, off-road vehicles, aircraft and more. Move your electronics conveniently between different types of base mounts in different locations in one easy click. Want to unlock multiple mounting options in different locations or simply mount a different electronic device? Just add another top or base to your modular kit to extend the possibilities of your ROKK mini starter kit.Kit Includes: Universal ClampAdjustable BodyMount
Scanstrut Rls509405 Rokk Mini Mount - Cell Phone Clamp Kit, Suction Cup Mount - Rls-509-405 - 922-Rls509405F1
The ROKK mini universal mounting kit is the toughest mounting system for your device. The hi-performance ROKK mini modular system allows you to attach your electronics to boats, cars, off-road vehicles, aircraft and more. Move your electronics conveniently between different types of base mounts in different locations in one easy click. Want to unlock multiple mounting options in different locations or simply mount a different electronic device? Just add another top or base to your modular kit to extend the possibilities of your ROKK mini starter kit.Kit Includes: Universal ClampAdjustable BodyMount
Scanstrut Rokk Mini Phone Clamp - Rl-509 - 922-Rl509F1
ROKK Mini is a compact and multi-adjustable mounting system for smart phones, tablets, small fish finders, digital and action cameras and more! Small in size but big on features, ROKK Mini is simply the toughest, most reliable mount for your tech on board. No compromise. VERSATILE - A choice of base mounts to install your devices how you want, where you want MORE THAN A MOUNT - Designed, not just made. With features that you'll feel and hear more than you'll see QUICK FIT / QUICK RELEASE - Install your devices instantly on board. With one reassuring click your tech is both secured and released SOLID INSTALL - A metal-on-metal locking system multiplies your clamping efforts to achieve 100% locking force. Your electronics will never move, until you want them to.All ROKK Mini top plates are also compatible with ROKK Midi system.A complete system consists of a Clamp or Top Plate, a Body, and a mount. All 3 components are ordered separately.
Scanstrut Rokk Mini Tablet Clamp - Rl-508 - 922-Rl508F1
ROKK Mini is a compact and multi-adjustable mounting system for smart phones, tablets, small fish finders, digital and action cameras and more! Small in size but big on features, ROKK Mini is simply the toughest, most reliable mount for your tech on board. No compromise. VERSATILE - A choice of base mounts to install your devices how you want, where you want MORE THAN A MOUNT - Designed, not just made. With features that you'll feel and hear more than you'll see QUICK FIT / QUICK RELEASE - Install your devices instantly on board. With one reassuring click your tech is both secured and released SOLID INSTALL - A metal-on-metal locking system multiplies your clamping efforts to achieve 100% locking force. Your electronics will never move, until you want them to.All ROKK Mini top plates are also compatible with ROKK Midi system.A complete system consists of a Clamp or Top Plate, a Body, and a mount. All 3 components are ordered separately.
Schmitt 5 Spoke Destroyer Wheel With Poly Grip - 1731421P2-R - 120-1731421P2F1
5 Spoke, 22° dish Finger grip rimFoamed polyurethane grip with look & texture of leatherPolished stainless steelBlack center capFits 3/4" tapered shaft
Schmitt 5 Spoke Finger Grip Stainless Destroyer Wheel W/Knob, 13-1/2" - 1731321Fgk-R - 120-1731321Fgkf1
5 Spoke Finger grip rim with control knobPolished stainless steelFits 3/4" tapered shaft22° dish
Schmitt 6 Spoke Stainless Destroyer Wheel, 15-1/2" - 1521621 - 120-1521621F1
6 Spoke Polished stainless steelBlack center capFits 3/4" tapered shaft22° dish
Schmitt Burano Steering Wheel - Pu105111-04R - 120-10511104F1
Black Polyurethane, stainless steel spokes, chrome accents, hydrographic spoke inserts, chrome center cap, 3/4" tapered hub.
Schmitt Center Nut, 1/2" For Manual Steering - 712Nut - 120-712Nutf1
1/2" Center Nut For Manual Steering
Schmitt Center Nut, 12Mm For Uflex Steering - 702Nut - 120-702Nutf1
12mm Center Nut For Uflex Steering
Schmitt Fantasy Steering Wheel, 13.8" Black/Silver - Pu013104-R - 120-Pu013101F1
Fits 3/4" tapered shaft Includes black plastic cap
Schmitt Torcello Lite Steering Wheel, 13" Black/Silver - Pu063104-01R - 120-Pu06310401F1
Polyurethane, aluminum spoke Fits 3/4" tapered shaftIncludes cap
Schmitt Torcello Lite Steering Wheel, 14" Black/Chrome - Pu041144-12R - 120-04114112F1
Polyurethane, aluminum spoke Fits 3/4" tapered shaftIncludes cap
Schmitt Vision Elite Stainless Steering Wheel, 13-1/2" - 7161321Fgk-R - 120-7161321Fgk3F1
3 Spoke Finger grip rimControl knob with bearingsCast 316 stainless steelFits 3/4" tapered shaft
Scotty 0158 Ball With Track Adapter, 1" - 158 - 736-0158F1
Adapt your Scotty low profile track to the Scotty ball mounting system. For use with all Scotty ball mounts and low profile tracks.
Scotty 0168 Ball With Track Adapter, 1.5" - 168 - 736-0168F1
Adapt your Scotty low profile track to the Scotty ball mounting system. For use with all Scotty ball mounts and low profile tracks.
Scotty 0438 Gear-Head Track Adapter, 12/Case - 438 - 736-0438F1
Quickly slides into place and locks down your post mounted Scotty Rod Holders and Accessories Quickly change positions with a simple twist.Use your favorite, fully adjustable Scotty Rod Holder and adjust it to any vertical or horizontal position without having to drill permanent mounting holesDesigned to fit all kayak track systems
Scotty 0439 Track Adapter For Inflatable Pad - 439 - 736-0439F1
Mount your favorite track accessories to your inflatable watercraft's pre-installed 341 mounts. Simply fasten the track to your 341 mount with the supplied 1/4 x 20 x 1/2" stainless steel bolts. Slide and lock our 438 gear head adaptor or ball mount onto the track. Attach your post and ball mount accessories to the adapter.
Scotty 1025 Side Gunnel Adapter Bracket - 1025 - 736-1025F1
Side Gunnel Adapter Bracket
Scotty 1027 Rail Mt Adapter For 1050-1105 - 1027 - 736-1027F1
Rail Mt Adapter for 1050-1105
Scotty 1038 Cable Coupler, 12/Case - 1038 - 736-1038Sf1
Attaches the snaphook to the downrigger cable quickly and easily without the use of metal crimps. Removable rudder to eliminate weight spin.
Scotty 1071Dp Laketroller Manual Downrigger Clamp Mount (2" Opening) - 1071Dp - 736-1071Dpf1
Rugged low cost downriggers built for the smaller boat. Stainless steel and nylon construction materials assure that your downrigger stays in good condition for years. Includes drag brake, Scotty release(1181), 100' of braided stainless steel wire, necessary mounts & instructions. Backed by Scotty's lifetime warranty.
Scotty 242Bk Rod Holder Rail Adapter, Black - 0242-Bk - 736-242Bkf1
Fits 7/8" & 1" diameter round rail, and 1" square rail For all Scotty post mount rod holdersWorks in conjunction with No. 241 Side / Deck Mount (not included)Includes stainless steel fastenersWhen using the 242 with a 1" square rail, substitute 1/4 - 20 x 2" round head SS machine screws (not included)
Scotty 266S Float Tube Adapter - 266 - 736-266Sf1
Mounting straps and brackets for use with No. 241 Side/Deck Mount or 241L Locking Side/Deck Mount Adjustable wrap-around straps are quick and easy to release from your float tube or pontoon boatIncludes 2 brackets, 2 mounting straps and hardware (Combination Side/Deck Mounts not included)
Scotty 267 Fly Rod Holder W/Float Tube Adapter & 241 Mount - 267 - 736-267F1
Innovative compact design, allows hands free trolling with a fly rod. Fully adjustable and includes a safety strap. Includes #241 combination deck or side mounting bracket. Tube mount version includes adjustable wrap around straps with quick release clips to use with your float tube or pontoon boat.
Scotty 339S Powerlock Rod Holder W/#449 Clamp Mount, Black - 0339-Bk - 736-0339Bkf1
Fully adjustable, positive locking, open style rod holder. Made from fiber-reinforced engineering nylon. Powerlock offers strength and reliability
Scotty 449 Portable Clamp Mount, 12/Case - 449 - 736-449F1
Fully portable mounting option for all Scotty Rod Holders and post mounted accessories Includes #241 Combination Side/Deck MountMade from tough, reinforced engineering grade nylonA great portable mount solution for small boatsIncludes all necessary fasteners
Scotty 544S Hand Bilge Pump, 13-1/2", 10/Case - 544 - 736-544Sf1
Stainless rod for strength and durability Large handles for easier operationEasily disassembled for cleaning
Scotty 545S Hand Bilge Pump, 21", 10/Case - 545 - 736-545Sf1
Stainless rod for strength and durabilityLarge handles for easier operationEasily disassembled for cleaning
Scotty 548S Hand Bilge Pump, 34", 10/Case - 548 - 736-548Sf1
Stainless rod for strength and durabilityLarge handles for easier operationEasily disassembled for cleaning
Scotty Ball Mount System W/Gear Head Adapter, Post & Combination Side/Deck Mount - 152 - 736-152F1
The new Scotty Ball Mounting System with Gear-Head Adapter, Post and Side/ Deck Mount provides a mounting receptacle for a variety of Scotty post mount accessories The Gear-Head's effortless drop and lock system allows the user to secure and re-position post mount accessories with just a twistThe Scotty No. 152 comes with Scotty's famous No. 241 Combination Side/ Deck MountThe ball joint design of the Scotty No. 152 enables a smooth, full range of motionThe corrosion proof construction of this system provides a long service life in both fresh and salt water applicationsBase Mount Dimensions: 4" x 2" x 2"
Scotty Coaming/Gunnel Clamp Mount - 433 - 736-433F1
Position your rod holder or Scotty accessory virtually anywhere on your kayak coaming, canoe or tin boat gunnel. Made with super-tough reinforced nylon, the 433 revolutionizes the way you can fish from your sit-in kayak, canoe or boat. The attached Gear-Head mount allows you to quickly change rod holder positions with a simple twist. Easily fasten the 433, drop and lock your favorite Scotty rod holder or accessory and start fishing! A non-permanent solution for mounting fishing gear to your watercraft and getting you out there!
Scupper Valve - 520500-1 - 354-5205001F1
Injection molded nylon. Carded.
Scupper Valve Assembly - 0365Dp - 9-0365Dpf1
Molded white plastic with soft black flapper valve. Without thru-hull and mounting hardware. For surface mount applications. Flange is 2-7/8" diameter.
Sea Dog Hollow Braid Poly-Pro Anchor Line With Steel Snap - 304206050Yw-1 - 354-304206050Yw1F1
Hollow Braid Anchor Line with Snap 100% premium multi-filament polypropylene floating ropePlated steel snapPackaged in a clamshell pack
Sea Dog Hollow Braid Poly-Pro Anchor Line With Steel Snap - 304206100Yw-1 - 354-304206100Yw1F1
Hollow Braid Anchor Line with Snap 100% premium multi-filament polypropylene floating ropePlated steel snapEasy to dispense spool
Sea Dog Hollow Braid Poly-Pro Anchor Line With Steel Snap - 304210075Yw-1 - 354-304210075Yw1F1
Hollow Braid Anchor Line with Snap 100% premium multi-filament polypropylene floating ropePlated steel snapEasy to dispense spool
Sea Dog Hollow Braid Poly-Pro Anchor Line With Steel Snap - 304210100Yw-1 - 354-304210100Yw1F1
Hollow Braid Anchor Line with Snap 100% premium multi-filament polypropylene floating ropePlated steel snapEasy to dispense spool
Sea Flange Valve 2 - 78-120-01 - 37-7812001F1
Full-flow, 85-5-5-5 bronze ball valves are designed to replace the old style sea cocks. Stainless steel handle and stem nut, chrome plated bronze ball, glass reinforced TFE seats and seals and body drain plug. U.L. listed. Made in U.S.A. NOT TO BE USED IN POTABLE WATER SYSTEMS.
Sea Pump To Oil Cooler Hose - 88795 - 710-32-88795F1
Sea Pump W/O Air Fittings Ss<46-8M0137215 - 8M0139994 - 710-46-8M0139994F1
Sea Strainer 3-3/8" X 1-1/4" - Dok - 70-Dokf1
Sea Strainer Zinc.
Sea Water Strainer, 1-1/2" - 18029 - 762-18029F1
Designed to deliver full flow of liquid at ultra low pressure differential while providing effective filtration. Stainless steel screen provides a large ratio of screen area to port size. Clear bowl enables quick examination for cleaning without removing the strainer from the line. Lightweight mount offers simple in line mounting and eliminates the need for supporting brackets. Convenient ports feature stainless steel ferrule reinforcements. Non-corrosive construction.
Sea Water Strainer, 1-1/4" - 18016 - 762-18016F1
Designed to deliver full flow of liquid at ultra low pressure differential while providing effective filtration. Stainless steel screen provides a large ratio of screen area to port size. Clear bowl enables quick examination for cleaning without removing the strainer from the line. Lightweight mount offers simple in line mounting and eliminates the need for supporting brackets. Convenient ports feature stainless steel ferrule reinforcements. Non-corrosive construction.
Sea Water Strainer, 1" - 18005 - 762-18005F1
Designed to deliver full flow of liquid at ultra low pressure differential while providing effective filtration. Stainless steel screen provides a large ratio of screen area to port size. Clear bowl enables quick examination for cleaning without removing the strainer from the line. Lightweight mount offers simple in line mounting and eliminates the need for supporting brackets. Convenient ports feature stainless steel ferrule reinforcements. Non-corrosive construction.
Sea Water Strainer, 3/4" - 18001 - 762-18001F1
Designed to deliver full flow of liquid at ultra low pressure differential while providing effective filtration. Stainless steel screen provides a large ratio of screen area to port size. Clear bowl enables quick examination for cleaning without removing the strainer from the line. Lightweight mount offers simple in line mounting and eliminates the need for supporting brackets. Convenient ports feature stainless steel ferrule reinforcements. Non-corrosive construction.
Sea-Dog 041708 Heavy Duty Stainless Steel Open Base Cleat, 8" - 41708 - 354-041708F1
These heavy-duty 316 stainless large open base cleats are designed to handle multiple dock lines and distribute heavy loads with ease. They provide easy line tie-off and corrosion resistance in a traditional style cleat. Four thru-bolts required for installation (not included).
Sea-Dog 041710 Heavy Duty Stainless Steel Open Base Cleat, 10" - 41710 - 354-041710F1
These heavy-duty 316 stainless large open base cleats are designed to handle multiple dock lines and distribute heavy loads with ease. They provide easy line tie-off and corrosion resistance in a traditional style cleat. Four thru-bolts required for installation (not included).
Sea-Dog 041712 Heavy Duty Stainless Steel Open Base Cleat, 12" - 41712 - 354-041712F1
These heavy-duty 316 stainless large open base cleats are designed to handle multiple dock lines and distribute heavy loads with ease. They provide easy line tie-off and corrosion resistance in a traditional style cleat. Four thru-bolts required for installation (not included).
Sea-Dog 041715 Heavy Duty Stainless Steel Open Base Cleat, 15" - 41715 - 354-041715F1
These heavy-duty 316 stainless large open base cleats are designed to handle multiple dock lines and distribute heavy loads with ease. They provide easy line tie-off and corrosion resistance in a traditional style cleat. Four thru-bolts required for installation (not included).
Sea-Dog 041856 Arch Stud Mount Stainless Steel Cleat, 6" - 41856 - 354-041856F1
The investment cast 316 stainless steel, stud mounted, arch cleat is classically styled and corrosion resistant. Installation is easy, just drill 2 holes for the studs. fasteners are hidden. Includes backing plate and locking nuts for installation. Optional decorative rub plate available.
Sea-Dog 041860 Arch Stud Mount Stainless Steel Cleat, 10" - 41860 - 354-041860F1
The investment cast 316 stainless steel, stud mounted, arch cleat is classically styled and corrosion resistant. Installation is easy, just drill 2 holes for the studs. fasteners are hidden. Includes backing plate and locking nuts for installation. Optional decorative rub plate available.
Sea-Dog 041886 Arch Stud Mount Stainless Steel Rub Plate, 6" - 41886 - 354-041886F1
Sea-Dog 041886 Arch Stud Mount Stainless Steel Rub Plate, 6",Optional decorative rub plate for Arch Stud Mount Cleat.,,4555636,Hardware,Cleats, 354-041888,Sea-Dog 041888 Arch Stud Mount Stainless Steel Rub Plate, 8" Optional decorative rub plate for Arch Stud Mount Cleat.
Sea-Dog 041890 Arch Stud Mount Stainless Steel Rub Plate, 10" - 41890 - 354-041890F1
Optional decorative rub plate for Arch Stud Mount Cleat. Die cast chrome plated zinc cleats are an economical choice for freshwater applications. Designed to keep lines snugly secured. Easy surface mount installation with four FH fasteners (not included).
Sea-Dog 0801351 Stern Eye - Stainless Steel, 3/8" - 080135-1 - 354-0801351F1
Corrosion resistant machined 304 stainless steel w/adjustable finish nuts for superior performance over crimp ring style stern eyes. For use as a tie-down point on your boat's stern. Robust backing plate for added rigidity in water ski tow applications.
Sea-Dog 0801551 Stern Eye - Stainless Steel, 1/2" - 080155-1 - 354-0801551F1
Corrosion resistant machined 304 stainless steel w/adjustable finish nuts for superior performance over crimp ring style stern eyes. For use as a tie-down point on your boat's stern. Robust backing plate for added rigidity in water ski tow applications.
Sea-Dog 0802531 U-Bolt - Stainless Steel, 3/16" - 080253-1 - 354-0802531F1
U-bolts are constructed of corrosion resistant machined 304 stainless steel and feature metric threads. The outer mounting plate is held in place by crimped ears forged into the U-Bolt. Comes complete with metric nuts.
Sea-Dog 080263 U-Bolt - Stainless Steel, 6 Mm - 080263-1 - 354-0802631F1
U-bolts are constructed of corrosion resistant machined 304 stainless steel and feature metric threads. The outer mounting plate is held in place by crimped ears forged into the U-Bolt. Comes complete with metric nuts.
Sea-Dog 080265 U-Bolt - Stainless Steel, 6 Mm - 080265-1 - 354-0802651F1
U-bolts are constructed of corrosion resistant machined 304 stainless steel and feature metric threads. The outer mounting plate is held in place by crimped ears forged into the U-Bolt. Comes complete with metric nuts.
Sea-Dog 080283 U-Bolt - Stainless Steel, 8 Mm - 080283-1 - 354-0802831F1
U-bolts are constructed of corrosion resistant machined 304 stainless steel and feature metric threads. The outer mounting plate is held in place by crimped ears forged into the U-Bolt. Comes complete with metric nuts.
Sea-Dog 080285 U-Bolt - Stainless Steel, 8 Mm - 080285-1 - 354-0802851F1
U-bolts are constructed of corrosion resistant machined 304 stainless steel and feature metric threads. The outer mounting plate is held in place by crimped ears forged into the U-Bolt. Comes complete with metric nuts.
Sea-Dog 08028881 U-Bolt - Stainless Steel, 8 Mm - 080288-1 - 354-0802881F1
U-bolts are constructed of corrosion resistant machined 304 stainless steel and feature metric threads. The outer mounting plate is held in place by crimped ears forged into the U-Bolt. Comes complete with metric nuts.
Sea-Dog 140178 Twisted Stainless Steel D-Shackle, 5/16" - 140178 - 354-140178F1
Stamped 304 Stainless Steel.
Sea-Dog 146590 Swivel Eye Bolt Snap - Stainless Steel - 146590 - 354-146590F1
Swivel eye bolt snaps are designed for use with rope, chain, wire or cable. Constructed of corrosion resistant investment cast 316 stainless steel they can be used for tie-downs, lifting wires or in other rigging applications. 360° swivel strap eye eliminates tangling. Spring-loaded bolts provide secure closure with the advantage of an easy-open thumb lever.
Sea-Dog 1465901 Swivel Eye Bolt Snap - Stainless Steel - 146590-1 - 354-1465901F1
Swivel eye bolt snaps are designed for use with rope, chain, wire or cable. Constructed of corrosion resistant investment cast 316 stainless steel they can be used for tie-downs, lifting wires or in other rigging applications. 360° swivel strap eye eliminates tangling. Spring-loaded bolts provide secure closure with the advantage of an easy-open thumb lever.
Sea-Dog 146736 Eye Grab Hook, Stainless Steel, 3" - 146736 - 354-146736F1
Investment cast 316 stainless steel.
Sea-Dog 146738 Eye Grab Hook, Stainless Steel, 3-1/2" - 146738 - 354-146738F1
Investment cast 316 stainless steel.
Sea-Dog 146740 Eye Grab Hook, Stainless Steel, 4" - 146740 - 354-146740F1
Investment cast 316 stainless steel.
Sea-Dog 1470541 Bow Shackle-Stainless Steel A: 1/8", B:5/16", C:1/2", D:13/16" - 147054-1 - 354-1470541F1
With their rounded shape bow shackles are designed to handle many different types of load from any direction. Constructed of investment cast 316 stainless these shackles feature a screw pin closure. Ideal for many rigging applications. We do not load rate cast shackles.
Sea-Dog 147126 Captive Pin Stainless Steel D-Shackle, 1/4" - 147126-1 - 354-1471261F1
Designed for rigging applications with bi-directional loads the D style shackle has straight sides with a U-shape rounded bottom. The U-shaped end can handle heavy loads, loads on the straight sides, however, may cause bending. Constructed of forged 316 stainless these shackles feature a captive pin closure. When open the pin completely clears the opening of the shackle and is recessed into a secured flush position. The pin remains captive and will not fall out, no risk of loss due to vibration. With other shackles, the pin is not flush until you partially unscrew it. Ideal for rigging applications where single-handed operation is required.
Sea-Dog 1471861 Wide D-Shackle/Mooring Buoy Stainless Steel Shackle - 147186-1 - 354-1471861F1
Constructed of forged 316 stainless the wide D-style shackle has straight sides with a U-shape rounded bottom. Designed for rigging applications with bi-directional loads. The U-shaped end can handle heavy loads, loads on the straight sides, however, may cause bending. The wide D-Shackles provide extra width for maximum mounting area. Ideal for use on mooring buoys.
Sea-Dog 1471881 Wide D-Shackle/Mooring Buoy Stainless Steel Shackle - 147188-1 - 354-1471881F1
Constructed of forged 316 stainless the wide D-style shackle has straight sides with a U-shape rounded bottom. Designed for rigging applications with bi-directional loads. The U-shaped end can handle heavy loads, loads on the straight sides, however, may cause bending. The wide D-Shackles provide extra width for maximum mounting area. Ideal for use on mooring buoys.
Sea-Dog 153610 Pear Style Stainless Steel Quick Link, 4-13/16" - 153610 - 354-153610F1
Reusable and removable, quick links feature two-sided thread links designed for fast, easy connections between 2 lengths of chain or for attaching accessories to chain. The pear shape design places more of the load on the stronger, non-gate side increasing the breaking strength. Hex shaped bolt for easy opening. Constructed of formed 316 stainless steel for strength, durability and corrosion resistance. Ideal for chain repair, hammocks and gates.
Sea-Dog 1560601 Galvanized Steel Snap, 2-3/8" - 156060-1 - 354-1560601F1
Mild steel electrogalvanized.
Sea-Dog 1560801 Galvanized Steel Snap, 3-3/16" - 156080-1 - 354-1560801F1
Mild steel electrogalvanized.
Sea-Dog 1561001 Galvanized Steel Snap, 3-15/16" - 156100-1 - 354-1561001F1
Mild steel electrogalvanized.
Sea-Dog 156160 Galvanized Steel Snap, 6-1/4" - 156160 - 354-156160F1
Mild steel electrogalvanized.
Sea-Dog 182210 Stainless Steel Eye & Jaw Swivel, 3/8" - 182210 - 354-182210F1
Swivels link together two parts that have separate rotational directions reducing knotting or twisting and relieving stress. Constructed of corrosion resistant investment cast 316 stainless steel these eye to jaw swivels are ideal for anchor to chain connections. The swivel action also facilitates anchor set by allowing the anchor to rotate freely and dig in to set more quickly. We do not load rate cast swivels
Sea-Dog 191207 Stainless Steel Ring, 1/8" X 3/4" - 191207 - 354-191207F1
Formed 304 Stainless Steel.
Sea-Dog 191307 Stainless Steel Ring, 3/16" X 3/4" - 191307 - 354-191307F1
Formed 304 Stainless Steel.
Sea-Dog 191310 Stainless Steel Ring, 3/16" X 1" - 191310 - 354-191310F1
Formed 304 Stainless Steel.
Sea-Dog 191312 Stainless Steel Ring, 3/16" X 1-3/16" - 191312 - 354-191312F1
Formed 304 Stainless Steel.
Sea-Dog 191410 Stainless Steel Ring, 1/4" X 1" - 191410 - 354-191410F1
Formed 304 Stainless Steel.
Sea-Dog 191412 Stainless Steel Ring, 1/4" X 1-1/4" - 191412 - 354-191412F1
Formed 304 Stainless Steel.
Sea-Dog 191415 Stainless Steel Ring, 1/4" X 1-1/2" - 191415 - 354-191415F1
Formed 304 Stainless Steel.
Sea-Dog 191512 Stainless Steel Ring, 5/16" X 1/1/4" - 191512 - 354-191512F1
Formed 304 Stainless Steel.
Sea-Dog 191515 Stainless Steel Ring, 5/16" X 1-1/2" - 191515 - 354-191515F1
Formed 304 Stainless Steel.
Sea-Dog 191517 Stainless Steel Ring, 5/16" X 1-3/4" - 191517 - 354-191517F1
Formed 304 Stainless Steel.
Sea-Dog 191520 Stainless Steel Ring, 5/16" X 2" - 191520 - 354-191520F1
Formed 304 Stainless Steel.
Sea-Dog 191522 Stainless Steel Ring, 5/16" X 2-1/4" - 191522 - 354-191522F1
Formed 304 Stainless Steel.
Sea-Dog 191625 Stainless Steel Ring, 3/8" X 2-1/2" - 191625 - 354-191625F1
Formed 304 Stainless Steel.
Sea-Dog 191632 Stainless Steel Ring, 3/8" X 3-1/4" - 191632 - 354-191632F1
Formed 304 Stainless Steel.
Sea-Dog 191830 Stainless Steel D Ring - 191830 - 354-191830F1
D-Rings are used primarily as a lashing point for light loading or tie-down applications. Used in conjunction with a metal pad eye they are ideal for attaching ropes, chains, or straps. Constructed of formed 304 stainless steel for corrosion resistance and durability.
Sea-Dog 191831 Stainless Steel D Ring - 191831 - 354-191831F1
D-Rings are used primarily as a lashing point for light loading or tie-down applications. Used in conjunction with a metal pad eye they are ideal for attaching ropes, chains, or straps. Constructed of formed 304 stainless steel for corrosion resistance and durability.
Sea-Dog 191840 Stainless Steel D Ring - 191840 - 354-191840F1
D-Rings are used primarily as a lashing point for light loading or tie-down applications. Used in conjunction with a metal pad eye they are ideal for attaching ropes, chains, or straps. Constructed of formed 304 stainless steel for corrosion resistance and durability.
Sea-Dog 192027 Stainless Steel Ring, 3/16" X 1-1/16" - 192027 - 354-192027F1
Die Cast Manganese Bronze.
Sea-Dog 192029 Stainless Steel Ring, 3/16" X 1-1/8" - 192029 - 354-192029F1
Die Cast Manganese Bronze.
Sea-Dog 198105 S-Hook - Plated Steel, 3/16" X 2-3/16" - 198105-1 - 354-1981051F1
Formed 304 Stainless Steel.
Sea-Dog 2211001 Anti-Rattle Fastener, Stainless Steel, A: 3", B: 3/4" C:1/4", D: 1-1/2", #10 Fh - 221100-1 - 354-2211001F1
Anti-Rattle Latch features an open-mount, center-tensioning cam latch for a tight, no-rattle seal. Surface mounts easily with four #10 FH fasteners (not included). Latch also features a locking hole that will accept a padlock with up to a 1/4" diameter shank.
Sea-Dog 2211201 Stainless Steel Safety Hasp, 2-11/16" - 221120-1 - 354-2211201F1
Constructed of 304 stainless steel for superior corrosion resistance and durability. These hasps are ideal for use on doors, cabinets, dock boxes, and lockers. Designed with a slotted plate that fits over a fixed post they are used in conjunction with a padlock to prevent removal when locked. Installs with eight #6 FH fasteners (not included). For added security, all mounting screws are concealed when hasp is closed.
Sea-Dog 2211241 Stainless Steel Safety Hasp, 3-11/16" - 221124-1 - 354-2211241F1
Constructed of 304 stainless steel for superior corrosion resistance and durability. These hasps are ideal for use on doors, cabinets, dock boxes, and lockers. Designed with a slotted plate that fits over a fixed post they are used in conjunction with a padlock to prevent removal when locked. Installs with eight #6 FH fasteners (not included). For added security, all mounting screws are concealed when hasp is closed.
Sea-Dog 221126 Stainless Steel Safety Hasp, 4-1/2" - 221126-1 - 354-2211261F1
Constructed of 304 stainless steel for superior corrosion resistance and durability. These hasps are ideal for use on doors, cabinets, dock boxes, and lockers. Designed with a slotted plate that fits over a fixed post they are used in conjunction with a padlock to prevent removal when locked. Installs with eight #6 FH fasteners (not included). For added security, all mounting screws are concealed when hasp is closed.
Sea-Dog 2223301 Elbow Catch, Chrome/Brass 1 Pr. - 222330-1 - 354-2223301F1
This spring-loaded extruded brass elbow catch is ideal for the inactive side of a pair of cabinet doors. For use on wood or metal doors where no frame is present between doors. Surface mounted catches are quick and simple to install and allow for door to lock shut when pushed. Requires releasing the hook to open the door making them very secure. Traditionally used in conjunction with a touch or magnetic latch on the primary door. Latch installs with two #6 FH fasteners. Slotted hole in catch allows for adjustable installation. Installation hardware not included.
Sea-Dog 2223351 Elbow Catch, Brass 1 Pr. - 222335-1 - 354-2223351F1
This spring-loaded extruded brass elbow catch is ideal for the inactive side of a pair of cabinet doors. For use on wood or metal doors where no frame is present between doors. Surface mounted catches are quick and simple to install and allow for door to lock shut when pushed. Requires releasing the hook to open the door making them very secure. Traditionally used in conjunction with a touch or magnetic latch on the primary door. Latch installs with two #6 FH fasteners. Slotted hole in catch allows for adjustable installation. Installation hardware not included.
Sea-Dog 230323 3-Spoke Stainless Steering Wheel With Integral Knob, 13-1/2" - 230323 - 354-230323F1
Constructed of corrosion resistant formed 304 stainless steel these steering wheels feature 3-spokes, a 25° dish angle and an integral knob. Wheel fits standard 3/4" tapered shafts.
Sea-Dog 2705001 Lifeline Fitting, Stanchion Eye Insert, 1" - 270500-1 - 354-2705001F1
These Lifeline Fittings are constructed of corrosion resistant investment cast 316 stainless steel.
Sea-Dog 270505 Lifeline Fitting, Stanchion Eye, 1" - 270505 - 354-270505F1
These Lifeline Fittings are constructed of corrosion resistant investment cast 316 stainless steel.
Sea-Dog 2705111 Lifeline Fitting, Stanchion Cap Insert, 1" - 270511-1 - 354-2705111F1
These Lifeline Fittings are constructed of corrosion resistant investment cast 316 stainless steel.
Sea-Dog 270521 Lifeline Fitting, Clevis Slide, 1" - 270521-1 - 354-2705211F1
These Lifeline Fittings are constructed of corrosion resistant investment cast 316 stainless steel.
Sea-Dog 2705301 Lifeline Fitting, Stanchion Sleeve W/Eye, 7/8" - 270530-1 - 354-2705301F1
These Lifeline Fittings are constructed of corrosion resistant investment cast 316 stainless steel.
Sea-Dog 270540 Lifeline Fitting, 4° Rect. Base, 1" - 270540-1 - 354-2705401F1
These Lifeline Fittings are constructed of corrosion resistant investment cast 316 stainless steel.
Sea-Dog 2851611 60° End Rail Fitting, Stainless, 1" Tubing - 285161-1 - 354-2851611F1
These hand rail fittings are constructed of investment cast 316 stainless steel for corrosion resistance and durability. Designed for use with 1" OD stainless tubing with a wall thickness of .049". Includes set screws where appropriate.
Sea-Dog 3215991 Gas Lift Rod End Fitting - 321599-1 - 354-3215991F1
Unique multi-lobe seal. Heavy gauge steel body, hard chromium plated shafts, bronze bushings and polymer end fittings. Self-cleaning orifice.
Sea-Dog 321805 Stainless Steel Hinged Chain Deck Pipe - 321805 - 354-321805F1
Investment cast 316 stainless chain deck pipe. Use #10 fastener.
Sea-Dog 329905 Ug175U Uhf Coax Adapter - 329905-1 - 354-3299051F1
Nickel plated brass fittings for coaxial cable installation applications.
Sea-Dog 329906 Ug176U Uhf Coax Adapter - 329906-1 - 354-3299061F1
Nickel plated brass fittings for coaxial cable installation applications.
Sea-Dog 331296 Collector Box, 3" Hose, Left Mount - 331296 - 354-331296F1
Constructed of impact resistant vacuum formed ABS for use with a louvered vent to facilitate air intake and exhaust.
Sea-Dog 3373161 Flush Hose Vent, 3" Hose, A: 2-13/16", B: 2-3/4", C:3-11/16", D:5/16" ,Hose/ Hole Size : Up To 3", White - 337316-1 - 354-3373161F1
Flush Thru Vents are designed for cabin or bilge ventilation. Constructed of UV resistant injection molded ABS. For use with 3" exhaust hose. Installs with four #8 FH fasteners (not included). Avoid contact with acetone or strong solvents.
Sea-Dog 3373161 Flush Hose Vent, A: 2-13/16" , B:2-3/4", C:3-11/16", D:5/16", Hose/ Hole Size: Up To 3", Black - 337326-1 - 354-3373261F1
Flush Thru Vents are designed for cabin or bilge ventilation. Constructed of UV resistant injection molded ABS. For use with 3" exhaust hose. Installs with four #8 FH fasteners (not included). Avoid contact with acetone or strong solvents.
Sea-Dog 337416 Flush Hose Vent, 4" Hose, A:3-9/16" , B:3-3/4", C:4-15/16", D:5/16", Hose/ Hole Size:Up To 4", White - 337416-1 - 354-3374161F1
Flush Thru Vents are designed for cabin or bilge ventilation. Constructed of UV resistant injection molded ABS. For use with 4" exhaust hose. Installs with four #8 FH fasteners (not included). Avoid contact with acetone or strong solvents.
Sea-Dog 337426 Flush Hose Vent, Hose, A:3-9/16" , B:3-3/4", C:4-15/16", D:5/16", Hose/ Hole Size:Up To 4", Black - 337426-1 - 354-3374261F1
Flush Thru Vents are designed for cabin or bilge ventilation. Constructed of UV resistant injection molded ABS. For use with 4" exhaust hose. Installs with four #8 FH fasteners (not included). Avoid contact with acetone or strong solvents.
Sea-Dog 3375901 Flush Thru Vent, 3" Hose, Stainless - 337590-1 - 354-3375901F1
Flush Thru Vent designed for cabin or bilge ventilation. For use with 3" exhaust hose. Constructed of corrosion resistant investment cast 316 stainless steel. Installs with four #8 FH fasteners (not included).
Sea-Dog 351110 Flip Top Hose Gas Fill, 1-1/2" Hose - 351110 - 354-351110F1
Investment Cast 316 Stainless Steel.
Sea-Dog 3513221 Hose Deck Fill , A: 1-1/2" Hose, B:3", C:3" #10 Fh,Water - 351322-1 - 354-3513221F1
Constructed of corrosion resistant cast 316 stainless steel. Slotted cap requires a key to open and close. All fills and replacement caps (except waste) include attachment chain. Installs with three #10 FH fasteners (not included). USCG regulations require bonding wire to prevent sparking. 1-1/2" hose versions feature 1-1/4" - 11-1/2 NPSM straight cap threads.
Sea-Dog 3513401 Gas Deck Fill With Guard, 1-1/2" Hose - 351340-1 - 354-3513401F1
Gas hose deck fill with integral raised splash guard is constructed of corrosion resistant cast 316 stainless steel. Cap features easy-to-use tabs for key-less operation - no deck plate key required. Cap threads are 1-1/4" - 12 NPSM straight.
Sea-Dog 3573931 Hose Klip™ - Water Hose Lock For Deck Fills - 357393-1 - 354-3573931F1
Hose Klip™ Water Hose Lock stops hose from coming out of deck fill during filling. Compression fitting locks into place for hands free operation. Fits most 1-1/2" deck fills. Patent Pending.
Sea-Dog 3573935 Hose Klip™ - Water Hose Lock For Deck Fills, Pop Display 20/Pk - 357393-5 - 354-3573935F1
Hose Klip™ Water Hose Lock stops hose from coming out of deck fill during filling. Compression fitting locks into place for hands free operation. Fits most 1-1/2" deck fills. Patent Pending.
Sea-Dog 4261011 Instrument Hole Adapter For 1-1/8" Sockets & Meters - 426101-1 - 354-4261011F1
This Instrument Hole Adapter is designed to install standard 1-1/8" gauges and meters into 2" instrument dash panel holes. The socket adapter installs by placing the face plate in front of the dashboard then inserting the socket/meter in the hole with the washer behind. The assembly is held in place by the socket/meter nut for a clean, finished look. Constructed of UV resistant injection molded nylon.
Sea-Dog 4261031 Instrument Hole Adapter For Sockets & Meters, Black - 426103-1 - 354-4261031F1
This Instrument Hole Adapter allows you to replace an unused 4" gauge with two new 1-1/8" style gauges. Installs by placing the face plate in front of the dashboard then inserting the socket/meter in the hole with the washer behind. The assembly is held in place by the socket/meter nut for a clean finished look. Constructed of UV resistant injection molded nylon.
Sea-Dog 4261041 Instrument Hole Adapter For Sockets & Meters, White - 426104-1 - 354-4261041F1
This Instrument Hole Adapter allows you to replace an unused 4" gauge with two new 1-1/8" style gauges. Installs by placing the face plate in front of the dashboard then inserting the socket/meter in the hole with the washer behind. The assembly is held in place by the socket/meter nut for a clean finished look. Constructed of UV resistant injection molded nylon.
Sea-Dog 435210 Bilge Blower, 3" - 435210 - 354-435210F1
Bilge Blower removes air from bilge, engine compartment, heads, and galley. Constructed of injection molded ABS. Installs with four 1/4" bolts (not included).
Sea-Dog 503236 Manual Bilge Pump - 503236-1 - 354-5032361F1
Constructed of durable UV resistant injection molded nylon these manual bilge pumps feature removable hoses, storage clips and removable foot valve for easy cleaning. 6 Strokes per gallon.
Sea-Dog 512210 Washdown Faucet, Chrome/Brass - 512210-1 - 354-5122101F1
Brass Chrome Plated. Ideal for exterior fresh water washdown. Allows for control of water flow on exterior surface. 1/2" FIPT x 3/4" MGHT. 3-5/8" Protrusion.
Sea-Dog 512220 Washdown Faucet - 512220-1 - 354-5122201F1
Brass Chrome Plated. Ideal for exterior fresh water washdown. Allows for control of water flow on exterior surface. 1/2" FIPT x 3/4" MGHT. 3-1/16" Protrusion.
Sea-Dog 517315 Sink Drain W/90° Fitting - 517315 - 354-517315F1
Injection Molded Delrin.90° 1-1/4" Sink Drain. Includes: 517310 Straight 1-1/4" and gasket, 517310 Straight 1-1/4" screws into the threaded 90° elbow.
Sea-Dog 520520 Scupper Valve, Black - 520520-1 - 354-5205201F1
Injection Molded Nylon/Neoprene.
Sea-Dog 5205251 Scupper Valve, White - 520525-1 - 354-5205251F1
Injection Molded Nylon/Neoprene.
Sea-Dog 5633101 Powder Coated Steel Multi-Purpose Cutter - 563310-1 - 354-5633101F1
This Multipurpose Cutter is great for rope, wire, and plastic tubing. Includes two spare utility blades stored in the handle.
Sea-Dog 6714951 Heavy Duty Coat Hook, Stainless Steel - 671495-1 - 354-6714951F1
Heavy Duty Coat Hook creates a great securing point for storing gear. Constructed of corrosion resistant investment cast 316 stainless steel. Installs with three #8 FH fasteners (not included). Fasteners are covered by a stainless plate for a clean look.
Sea-Dog 7538741 7-Way To 4-Flat Trailer Adapter - 753874-1 - 354-7538741F1
Injection Molded PVC.
Sea-Dog Boat Hook To Lock Button Accessory Adapter - 491060-1 - 354-4910601F1
Allows the Sea-Dog boat hook and boat pole with universal/Acme threads to be used with Shurhold™ and other accessories that have a lock button attachment system. Fiberglass filled injection molded nylon.
Sea-Dog Line 2270301 Elbow Catch, Black, A:,1-1/8" B:1-5/16", #6 Fh - 227030-1 - 354-2270301F1
Ideal for holding inactive doors shut. Constructed of UV resistant injection molded nylon. Surface mounts with four #6 FH fasteners (not included).
Sea-Flange Valve 1 - 78-118-01 - 37-7811801F1
Full-flow, 85-5-5-5 bronze ball valves are designed to replace the old style sea cocks. Stainless steel handle and stem nut, chrome plated bronze ball, glass reinforced TFE seats and seals and body drain plug. U.L. listed. Made in U.S.A. NOT TO BE USED IN POTABLE WATER SYSTEMS.
Sea-Flange Valve 1-1/2 - 78-116-01F - 37-7811601Ff1
Full-flow, 85-5-5-5 bronze ball valves are designed to replace the old style sea cocks. Stainless steel handle and stem nut, chrome plated bronze ball, glass reinforced TFE seats and seals and body drain plug. U.L. listed. Made in U.S.A. NOT TO BE USED IN POTABLE WATER SYSTEMS.
Sea-Flange Valve 1-1/4 - 78-119-01 - 37-7811901F1
Full-flow, 85-5-5-5 bronze ball valves are designed to replace the old style sea cocks. Stainless steel handle and stem nut, chrome plated bronze ball, glass reinforced TFE seats and seals and body drain plug. U.L. listed. Made in U.S.A. NOT TO BE USED IN POTABLE WATER SYSTEMS.
Sea-Flange Valve 3/4 - 78-115-01F - 37-7811501Ff1
Full-flow, 85-5-5-5 bronze ball valves are designed to replace the old style sea cocks. Stainless steel handle and stem nut, chrome plated bronze ball, glass reinforced TFE seats and seals and body drain plug. U.L. listed. Made in U.S.A. NOT TO BE USED IN POTABLE WATER SYSTEMS.
