Bal Products Div Nco
Bal 10800160 Exact-Slide Slide Out Electric Controller Gen 5.5 - 10800160 - 129-10800160 Superseded By: 129-10800194F1
Fits BAL's EXACT-SLIDE slide-out mechanism
Bal 20036 Crank Handle - 20036 - 129-20036F1
Standard 3/4" fixed drive socketRust inhibitive zinc coatingBlack rubber hand grips
Bal 20300030 Power C-Jack Coupler: D To Square - 20300030 - 129-20300030F1
Connects threaded rod to carriage bolt
Bal 231000 Electric Motor With Gearbox For Bal Powered C-Jack - 231000 - 129-231000F1
Bal 24210 Power Pak Add-On Motor Kit, 12V, Pair For Two Jacks - 24210 - 129-24210F1
All BAL Scissors Jacks and C-Jacks can be powered with an optional 12-volt motor kit. Quickly lower & raise your jacks with the push of a button. Light weight, high rpm and easily installed, Sealed motor has easy access to manual override. Using the motor to lift a vehicle may damage the motor. Kit Includes two sets of brackets for Scissors or 'C' Jacks, two white rocker switches with circuit breakers per box, mounting hardware included, Jacks or wire not included.
Bal 250761 Accu-Slide Replacement Gearbox - 25076-1 - 129-250761F1
Replaces R25076. Includes bracket.
Bal Accu-Slide Cable Repair Kit - 22305 - 129-22305F1
Universal cable repair kit with Hardware for Norco/BAL Accu-Slide slide out assemblies.
Bal Accu-Slide Replacement Motor - 22307 - 129-22307F1
Replacement 12v Motor for Accu-Slide.
Bal Grommet 9/32"X 5/8" 5/32 Grv. Fits Accu-Slide And Exact Slide - 854195 - 129-854195F1
Bal Light Trailer Stabilizing Jack W/20" Extension, (No Handle) Ea. - 23007 - 129-23007F1
For use on tent trailers, lightweight travel trailers and fifth wheels with up to 16" of frame-to-ground clearance. Ideal replacement for Atwood, Fulton and other non-screw design corner standsBolt-on application, mounting hardware included700 lb. lifting capacity and 1,000 lb. load capacity per jackRust-inhibiting E-coating for long life Note: Jack does not include a crank handle or hardware.
Bal Light Trailer Stabilizing Jacks W/20" Extension, 2/Pk - 23026 - 129-23026F1
For use on tent trailers, lightweight travel trailers and fifth wheels with up to 16" of frame-to-ground clearance. Ideal replacement for Atwood, Fulton and other non-screw design corner standsBolt-on application, mounting hardware included700 lb. lifting capacity and 1,000 lb. load capacity per jackRust-inhibiting E-coating for long lifeSets of 2 include crank handle and hardware
Bal Products 20031 Deluxe Base Pads For "T" Type & Telescopic Rv Trailer Stabilizing Jacks - 4 Pack - 20031 - 129-20031F1
Used on Deluxe "T" Type & Telescopic Stabilizing Jacks 7-1/4" diameter pad provides a firm footing on loose groundEasy to install, all hardware suppliedRubber sleeve prevents rattle during travel
Bal Products 20032 Deluxe Hex Head Replacement Crank Handle For Rv Trailer Jacks - 20032 - 129-20032F1
Chrome speed wrench crank handle Forged socket head for long lifeSpin handle grips for ease of operation
Bal Products 21100000 39" - 61" Tripod Fastjack For Rv Trailers - 21100000 - 129-21100000F1
Light weight, sturdy design (23 lbs.) Slips onto trailer's pin and uses gravity to assist in setupFull adjustability on each leg using ratchet systemNew Hybrid design - Aluminum/SteelMade in USA
Bal Products 225007 Motor Sprocket Up 68Zy Ht - 225007 - 129-225007F1
Motor assembly is used on the ACCU-Slide Systems.
Bal Products 225008 Motor Sprocket Up 68Zy Ht, High Torque - 225008 - 129-225008F1
Motor assembly is used on the ACCU-Slide Systems.
Bal Products 23025 Stabilizing Jack With 17" Extension For Light Rv Trailers - Pair - 23025 - 129-23025F1
For use on tent trailers, lightweight travel trailers and fifth wheels with up to 16" of frame-to-ground clearance. Ideal replacement for Atwood, Fulton and other non-screw design corner standsBolt-on application, mounting hardware included700 lb. lifting capacity and 1,000 lb. load capacity per jackRust-inhibiting E-coating for long lifeSets of 2 include crank handle and hardware
Bal Products 23035 Base Pads For Light Rv Trailer Stabilizing Jacks - 4 Pack - 23035 - 129-23035F1
Base Pads for Stabilizing Jacks
Bal Products 23216 Lock-Arm Sta-Bal-Izing Bar For Rv Trailers - Pair - 23216 - 129-23216F1
A perfect addition to your trailer's existing leveling or stabilizing jacks. The Lock-Arm extends to the trailer frame and mounts with two self-tapping screws (included). After the one time installation, the Lock-Arm will move up and down with the operation of the trailer's jack and will self store on the trailer. Once the jack is in the down position with the Lock-Arm extended, use your 3/4" crank handle to tighten the set bolt. This will secure the Lock-Arm and provide extra front to back stability. One pair of Lock-Arm Bars with mounting hardware per box. Will work with various styles and brands of jacks. Limited lifetime warranty.
Bal Products 23219 Manual "C" Jack, 5,000 Lb Capacity With 19" Extension For Rv Trailers - Pair With Handle - 23219 - 129-23219F1
Boxed set includes: two jacks with crank handle and hardware. C Jacks combine the strength of a leveling jack and the steadiness of a stabilizing jack. Designed for use with travel trailers and fifth wheel trailers. Designed to mount to the trailer frame where the cross member meets the main frame member. Highly engineered, low-profile design yields a light weight, high strength, low cost productHigh strength allows for stabilizing increased loads and fine levelingRapid extension provides quick activation of both up and down movementsIntegrated foot makes for secure, increased ground contact to prevent slipping or sinkingAdvanced, corrosion-resistant finish assures years of dependable
Bal Products 23225 4,000 Lb Capacity Manual "C" Jack With 25" Extension For Rv Trailers - Pair - 23225 - 129-23225F1
Boxed set includes: two jacks with crank handle and hardware. C Jacks combine the strength of a leveling jack and the steadiness of a stabilizing jack. For use with travel trailers and fifth wheel trailers. Designed to mount to the trailer frame where the cross member meets the main frame member. Highly engineered, low-profile design yields a light weight, high strength, low cost productHigh strength allows for stabilizing increased loads and fine levelingRapid extension provides quick activation of both up and down movementsIntegrated foot makes for secure, increased ground contact to prevent slipping or sinkingAdvanced, corrosion-resistant finish assures years of dependable
Bal Products 24003D Black 30" 5,000 Lb Capacity Scissor Jack For Rv Trailers - Pair - 24003D - 129-24003Df1
All steel construction. Each jack includes a 5" x 8" steel base plate and frame mounting plate. The crank turns easily due to a thrust ball bearing located at the junction of the drive screw and primary trunion. The entire jack is zinc plated and the handle is chromed. One model will fit most RVs regardless of the ground to frame clearance because it can extend from 4-3/4" to 30". Set of 2 jacks with 1 crank.For stabilizing and leveling purpose only. Never use for lifting, changing tires or supporting weight of any vehicles.
Bal Products 24028 Lopro Sj24 24" 5,000 Lb Capacity Scissor Jack With Handle For Rv Trailers - Pair - 24028 - 129-24028F1
BAL's next generation of scissor jacks offer lower profile storage & lighter weight construction without sacrificing capacity or function. Using our same 'Made in the USA' quality components & production capabilities, we have been able to offer a premium product for a more economical price. Each jack utilizes our Double Lead Acme Thread for faster extension & retraction. Our in house E-Coating process offers superior rust protection versus the import brand's powder coating. Each box contains two 24" 5,000 lb jacks, one handle, and mounting hardware.For stabilizing and leveling purpose only. Never use for lifting, changing tires or supporting weight of any vehicles.
Bal Products 24830 24" 2,000 Lb Telescopic Stabilizers For Rv Trailers - 24830 - 129-24830F1
Provides extra structural strength, provides fine leveling for optimum operation of trailer appliances. Adjustable cross member for frame widths 64" to 74" w/crank handle. Screw extension: 8".
Bal Products 25030 King Pin Bipod Stabilizer Jack For Rv Trailers - 25030 - 129-25030F1
Support Leg Length: 54" to 69 Jack Leg Length: 52-1/2" to 77-1/2"Minimum Height: 40", 72" Foot SpacingMaximum Height: 67", 30" Foot SpacingExtension Legs have five adjustments spaced 3" apart
Bal Products 25033 King Pin Tripod Stablizing Jack For Rv Trailers - 25033 - 129-25033F1
The King Pin Stabilizing Jack is designed to stabilize the front of a fifth wheel by absorbing the weight exerted by the king pin. Easy to operate; sets up in secondsDrive screw handle folds up when not in useLarge diameter base pads with heavy-duty chain and hooks
Bal Products 25035 King Pin 41" - 68" Tripod Stablizing Jack For Rv Trailers - 25035 - 129-25035F1
The King Pin Stabilizing Jack is designed to stabilize the front of a fifth wheel by absorbing the weight exerted by the king pin. Easy to operate; sets up in secondsDrive screw handle folds up when not in useLarge diameter base pads with heavy-duty chain and hooksIncludes three extension legs
Bal Products 25037 Gooseneck Tripod Stablizing Jack For Rv Trailers - 25037 - 129-25037F1
The King Pin Stabilizing Jack is designed to stabilize the front of a fifth wheel by absorbing the weight exerted by the king pin. Same as the model 25033 but includes an adapter that secures the jack to the gooseneckWorks on 2-5/16" gooseneck ball only
Bal Products 25066 King Pin Tripod Fastjack Stabilizer For Rv Trailers - 25066 - 129-25066F1
The TriPod FASTJACK is the lightest kin pin stabilizer on the market offering full adjustability on each of the three legs. The TriPod FASTJACK slips on to the trailer's pin to help support the FASTJACK and uses gravity to assist in setup. No need to worry about uneven ground while setting up as each leg independently adjusts to the ground using the integrated ratchet system. Apply tension as needed and enjoy maximum stabilization. No assembly requiredReady to use straight out of the boxCollapses to compact size to help with storageLarge base pads for firm footingLightweight - 16 lbsRust inhibitive finishLockable to trailer pin with included pad lockLimited One-Year Warranty
Bal Products 28005 Deluxe Tire Locking Chock For Rv Trailers - 28005 - 129-28005F1
Use Between Tandem Tires, Off the Ground. Locks wheels by applying opposing force to tires. Aids in trailer stabilizing, stops tire shift. Extends for 2-1/2" to 10". Lightweight and easy to store. Plated ratchet wrench with comfort bumper included. Rust inhibitive coating. Lockable with optional 129-28015.
Bal Products 28010 X-Chock Tire Locking Chock For Rv Trailers - 28010 - 129-28010F1
The X-Chock starts off where the Deluxe Tire Locking Chock leaves off but it's new, slimmer design will fit into more axle applications. Provides added stabilization and prevents tire shifts by applying opposing force to tandem tire applicationsAs opposed to other chocks, the X-Chock works with the tires' natural movement instead of against themFits even the tightest of applications retracting down to 1-3/8" and extends to 10"Rust inhibitive coatingPlated ratchet wrench with comfort bumper includedLightweight, easy to storeLockable for added security with optional 28015 Pad Lock
Bal Products 28012 X-Chock Tire Locking Chock For Rv Trailers - Pair - 28012 - 129-28012F1
The X-Chock starts off where the Deluxe Tire Locking Chock leaves off but it's new, slimmer design will fit into more axle applications. Provides added stabilization and prevents tire shifts by applying opposing force to tandem tire applicationsAs opposed to other chocks, the X-Chock works with the tires' natural movement instead of against themFits even the tightest of applications retracting down to 1-3/8" and extends to 10"Rust inhibitive coatingPlated ratchet wrench with comfort bumper includedLightweight, easy to storeLockable for added security with optional 28015 Pad Lock
Bal Products 28014 X-Tended X-Chock Tire Locking Chock With 17" Extension For Rv Trailers - 28014 - 129-28014F1
The same great features of the original X-Chock in a wider application. Extends up to 17" to accommodate wide track axle spacing commonly found on Bullet, LaCrosse, PrimeTime, Passport, North Trail, etc. Lockable with optional 129-28015.
Bal Products 28015 X-Chock Padlock For Rv Trailer Tire Locking Chocks & X-Tended Fit X-Chock - 28015 - 129-28015F1
Fits: 280052801028012 (2 required)2801428024 (2 required)
Bal Products 28024 X-Tended X-Chock Tire Locking Chock With 17" Extension For Rv Trailers, Set Of 2 Chocks - 28024 - 129-28024F1
The same great features of the original X-Chock in a wider application. Extends up to 17" to accommodate wide track axle spacing commonly found on Bullet, LaCrosse, PrimeTime, Passport, North Trail, etc. Lockable with optional 129-28015.
Bal Products 28050 Tire Leveler For Light Rv Trailers - 28050 - 129-28050F1
For use with tent trailers and lightweight single axle trailers. Levels your trailer from side to side in minutes!Ergonomic ratchet provided for raising and loweringFits most trailers with 13", 14", or 15" tiresHeavy duty steel tubular construction and corrosion resistant finish for long life
Bal Products 29005 Top Wind Swivel Mount 800 Lb Capacity Tongue Jack For Rv Trailers - 29005 - 129-29005F1
Corrosion Protection - Jack tubes are coated with a rust inhibitive process called E-coat. The coating can also serve as primer for custom paint finishes. Precision Metal Gears - Jacks incorporate precision molded, heat treated, copper alloyed metal gears and nutsHigh Performance BearingsProtective Lubricant - The internal screw is coated with a specially formulated lubricantTop wind model has a high strength handle800 lb capacityCaster includedNo Snap RingFactory replacement for older Coleman and Fleetwood Folding TrailersDIMENSIONS:A) 12-1/2" to 25" extendedB) 11"C) 6-1/2"D) 4-3/4"E) 6-1/2"Tube Diameters- Inner: 1-3/4" Outer 2"
Bal Products 29025B Side Wind A-Frame 2,000 Lb Capacity Tongue Jack For Rv Trailers - 29025B - 129-29025Bf1
Corrosion Protection - Jack tubes are coated with a rust inhibitive process called E-coat. The coating exceeds the A.S.T.M. standard 2000 hour salt spray test. The coating can also serve as primer for custom paint finishes. Precision Metal Gears - All BAL jacks incorporate precision molded, heat treated, copper alloyed metal gears and nutsHigh Performance BearingsProtective Lubricant - The internal screw is coated from top to bottom with a specially formulated lubricant that provides increased protection against wear and corrosionHigh Strengh TubingAccessible gear housing making it easier to lubricate and repairDIMENSIONS: A) 8" to 22" extendedB) 13-1/2"C) 6"D) 6-1/2"Tube Diameters - Inner: 2" Outer: 2-1/4"
Bal Products 29033Bl Top Wind A-Frame Screw 5,000 Lb Capacity Tongue Jack For Rv Trailers - 29033B - 129-29033Bf1
All screw jacks are equipped with nylon, ball or roller bearings on a hardened steel track. This provides the consumer easier cranking, reduces wear and increases the longevity of the jack. The internal screw is coated from top to bottom with a specially formulated lubricant that provides increased protection against wear and corrosion. Manufactured from high-strength, low alloy tubingE-coat protection5000 lb CapacityInner Ram 2", Outer Ram 2-1/4"Dimensions:A) 8" to 22" extendedB) 12"C) 7-1/2"D) 4-3/4" Tube Diameters- Inner: 2" Outer: 2-1/4"
Bal Products 29036B Swivel 1,000 Lb Capacity Caster Wheel For Rv Trailer Jacks - 29036B - 129-29036Bf1
Pinned-on style for a more secure attachment 1,000 Lb. capacity6" Dia. Caster wheel2" Wide wheel
Bal Products 29041B Swivel 2,000 Lb Capacity Caster Wheel For Rv Trailer Jacks - 29041B - 129-29041Bf1
Pinned-on style for a more secure attachment 1,000 Lb. capacity6" Dia. Caster wheel2" Wide wheel
Bal Products 29055B Extended Foot Pad For Rv Trailer Tongue Jacks - 29055B - 129-29055Bf1
Jack foot for 2000# tongue jack. Adds 8-1/2" height.
Bal Products 29056B Short Foot Pad With Locking Pin For Rv Trailer 2" Jack Tubes - 29056B - 129-29056Bf1
Fits 2" jack tubes and includes a locking pin to secure the foot pad to the jack leg during travel. Jack foot for 2000# tounge jacks.
Bal Products 854769 Drive Shaft Between Motor And Gearbox, .125" X 1.875" - 854769 - 129-854769F1
The driveshaft is the square bit between the motor and the gearbox. The motor and driveshaft can be removed to override the gearbox directly with the flexible override tool.
Bal Products 854769 Drive Shaft Between Motor And Gearbox, .190" X 1.770" - 854761 - 129-854761F1
The driveshaft is the square bit between the motor and the gearbox. The motor and driveshaft can be removed to override the gearbox directly with the flexible override tool.
Bal Products Black 24" Scissor Jack For Rv Trailers - 1Ea. - 24001 - 129-24001F1
All steel construction. Each jack includes a 5" x 8" steel base plate and frame mounting plate. The crank turns easily due to a thrust ball bearing located at the junction of the drive screw and primary trunion. The entire jack is zinc plated and the handle is chromed. One model will fit most RVs regardless of the ground to frame clearance because it can extend from 4-3/4" to 24-3/16". Sold individually.For stabilizing and leveling purpose only. Never use for lifting, changing tires or supporting weight of any vehicles.
Bal Products Black 24" Scissor Jack For Rv Trailers - Pair - 24002C - 129-24002Cf1
All steel construction. Each jack includes a 5" x 8" steel base plate and frame mounting plate. The crank turns easily due to a thrust ball bearing located at the junction of the drive screw and primary trunion. The entire jack is zinc plated and the handle is chromed. One model will fit most RVs regardless of the ground to frame clearance because it can extend from 4-3/4" to 24-3/16". Set of 2 jacks with 1 crank.For stabilizing and leveling purpose only. Never use for lifting, changing tires or supporting weight of any vehicles.
Bal Products Black 24" Scissor Jack For Rv Trailers - Pair - 24002D - 129-24002Df1
All steel construction. Each jack includes a 5" x 8" steel base plate and frame mounting plate. The crank turns easily due to a thrust ball bearing located at the junction of the drive screw and primary trunion. The entire jack is zinc plated and the handle is chromed. One model will fit most RVs regardless of the ground to frame clearance because it can extend from 4-3/4" to 24-3/16". Set of 2 jacks with 1 crank.For stabilizing and leveling purpose only. Never use for lifting, changing tires or supporting weight of any vehicles.
Bal Retract-A-Spare - 28240 - 129-28240F1
Store your spare tire under your trailer and off the rear bumper, it's universal, telescoping design allows for mounting on almost all travel trailers, 5th wheels, and motorized RVs. Even the super narrow frames of the trendy tear drops & ultra-light campers now have a home for their spare tire. Telescopic design fits frame widths of 52" to 72"Mounts under frame rails for installation versatilityMultiple cable spools spread cable out eliminating coil memorizationE-Coated for superior rust-inhibitive finishMade in the USA with a Two-Year Limited WarrantyDrilling through frame rail & carrier channel requiredMounting hardware included
Bal Tire Locking Chock - 28000A - 129-28000Af1
Use between trailer tandem wheels, prevents trailer from rolling and provides fore and aft stabilization. Made of structural steel and zinc plated. Extends from 15-1/4" to 23-1/8".
