Blue Sea Systems
Weatherdeck Toggle Switch Boot - 4138-Bss - 661-4138F1
Toggle boot replaces the dress nut for mounting on Weatherdeck Breaker Panel switches. It features nickel plated brass threads w/UV resistant black silicone rubber and has a waterproof rating of IP67 for immersion up to 30 minutes.
Weatherdeck Breaker Panel 12Vac 6 Pos Gray - 4376-Bss - 661-4376F1
Designed for flybridge and open cockpit applications. For 12 or 24 V systems. Constructed from corrosion resistant materials, the panel front withstands rain, sea spray, and hose spray wash down. Independent label backlighting circuit for remote switching and dimming. Compatible with all BSS digital dimmers. Rugged UV stabilized waterproof boots protect toggle switches and push button thermal circuit breakers.
Weatherdeck Breaker Panel 12Vac 4 Pos Gray - 4374-Bss - 661-4374F1
Designed for flybridge and open cockpit applications. For 12 or 24 V systems. Constructed from corrosion resistant materials, the panel front withstands rain, sea spray, and hose spray wash down. Independent label backlighting circuit for remote switching and dimming. Compatible with all BSS digital dimmers. Rugged UV stabilized waterproof boots protect toggle switches and push button thermal circuit breakers.
Weather Deck Fuse Panel 4 Pos Gray - 4304-Bss - 661-4304F1
Water resistant to IP67. Constructed from corrosion resistant materials. Concealed mounting screw holes. Integrated switch guards prevent accidental switching. UV tested faceplate. Rugged UV rated waterproof boots. Panel can be mounted in four different orientations. Illuminated circuit labels provide visibility in low light conditions. Bi-colored LED's. Panel cumulative rating of 45 amperes.
V-Series Single Bracket Black - 8268-Bss - 661-8268F1
Modular design permits assembly in groupes of varing sizes. Designed for 6 different panel thicknesses.
V-Series End Mount Plate Black - 8267-Bss - 661-8267F1
Modular design permits assembly in groupes of varing sizes. Designed for 6 different panel thicknesses.
V-Series Center Bracket Black - 8266-Bss - 661-8266F1
Modular design permits assembly in groupes of varing sizes. Designed for 6 different panel thicknesses.
Toggle Guard - 4100-Bss - 661-4100F1
Protects circuit breakers from being accidentally switched on or off. Fits all single-pole A and B series circuit breakers. Can be used on any brand of circuit breaker panel using standard A or B series circuit breakers. Includes mounting screws.
Terminal Feed Thru 5/16 Sm Red - 2202-Bss - 661-2202F1
Ideal for passing high current cables through hulls, decks and bulkheads where watertight or vapor proof integrity must be maintained. Feed-Through Terminals also eliminate chafing and provide strain relief for large cables. Larger terminals have a mounting face that can be gasketed or bedded to provide a watertight installation.
Terminal Feed Thru 5/16 Sm Black - 2201-Bss - 661-2201F1
Ideal for passing high current cables through hulls, decks and bulkheads where watertight or vapor proof integrity must be maintained. Feed-Through Terminals also eliminate chafing and provide strain relief for large cables. Larger terminals have a mounting face that can be gasketed or bedded to provide a watertight installation.
Terminal Feed Thru 3/8 Sm Red - 2204-Bss - 661-2204F1
Ideal for passing high current cables through hulls, decks and bulkheads where watertight or vapor proof integrity must be maintained. Feed-Through Terminals also eliminate chafing and provide strain relief for large cables. Larger terminals have a mounting face that can be gasketed or bedded to provide a watertight installation.
Terminal Feed Thru 3/8 Sm Black - 2203-Bss - 661-2203F1
Ideal for passing high current cables through hulls, decks and bulkheads where watertight or vapor proof integrity must be maintained. Feed-Through Terminals also eliminate chafing and provide strain relief for large cables. Larger terminals have a mounting face that can be gasketed or bedded to provide a watertight installation.
Terminal Block Ind 8 Cir 30 A - 2508-Bss - 661-2508F1
A closed back design completely insulates power from the mounting surface. Each screw pair is one isolated circuit. Optional jumpers allow creation of common circuits.
Terminal Block Ind 8 Cir 20 A - 2408-Bss - 661-2408F1
A closed back design completely insulates power from the mounting surface. Each screw pair is one isolated circuit. Optional jumpers allow creation of common circuits.
Terminal Block Ind 6 Cir 30 A - 2506-Bss - 661-2506F1
A closed back design completely insulates power from the mounting surface. Each screw pair is one isolated circuit. Optional jumpers allow creation of common circuits.
Terminal Block Ind 6 Cir 20 A - 2406-Bss - 661-2406F1
A closed back design completely insulates power from the mounting surface. Each screw pair is one isolated circuit. Optional jumpers allow creation of common circuits.
Terminal Block Ind 4 Cir 30A - 2504-Bss - 661-2504F1
A closed back design completely insulates power from the mounting surface. Each screw pair is one isolated circuit. Optional jumpers allow creation of common circuits.
Terminal Block Ind 2 Cir 30 A - 2502-Bss - 661-2502F1
A closed back design completely insulates power from the mounting surface. Each screw pair is one isolated circuit. Optional jumpers allow creation of common circuits.
Terminal Block Ind 12 Cir 30A - 2512-Bss - 661-2512F1
A closed back design completely insulates power from the mounting surface. Each screw pair is one isolated circuit. Optional jumpers allow creation of common circuits.
Terminal Block Ind 10 Cir 30 - 2510-Bss - 661-2510F1
A closed back design completely insulates power from the mounting surface. Each screw pair is one isolated circuit. Optional jumpers allow creation of common circuits.
Terminal Block Ind 10 Cir 20A - 2410-Bss - 661-2410F1
A closed back design completely insulates power from the mounting surface. Each screw pair is one isolated circuit. Optional jumpers allow creation of common circuits.
Terminal Block - 2404-Bss - 661-2404F1
A closed back design completely insulates power from the mounting surface. Each screw pair is one isolated circuit. Optional jumpers allow creation of common circuits.
Switch Toggle Spst Off-On - 8204-Bss - 661-8204F1
For applications such as starters, bilge pumps, horns, wipers and engine controls where switching, in addition to circuit protection is required. All panel switches mount in Blue-Sea A series breaker panels. Supplied with mounting adapter for standard 5/8" circuit breaker mounting hole. Nickel-plated brass and phenolic non-corrosive construction. White actuator. Rated 15A @ 32V DC or 125V AC, 10A @ 250V AC. 1/4" Tab terminals. On in parenthesis (On) indicates a momentary position.
Switch Toggle Spst Off-(On) - 8205-Bss - 661-8205F1
For applications such as starters, bilge pumps, horns, wipers and engine controls where switching, in addition to circuit protection is required. All panel switches mount in Blue-Sea A series breaker panels. Supplied with mounting adapter for standard 5/8" circuit breaker mounting hole. Nickel-plated brass and phenolic non-corrosive construction. White actuator. Rated 15A @ 32V DC or 125V AC, 10A @ 250V AC. 1/4" Tab terminals. On in parenthesis (On) indicates a momentary position.
Switch Toggle Spdt On-Off-On - 8206-Bss - 661-8206F1
For applications such as starters, bilge pumps, horns, wipers and engine controls where switching, in addition to circuit protection is required. All panel switches mount in Blue-Sea A series breaker panels. Supplied with mounting adapter for standard 5/8" circuit breaker mounting hole. Nickel-plated brass and phenolic non-corrosive construction. White actuator. Rated 15A @ 32V DC or 125V AC, 10A @ 250V AC. 1/4" Tab terminals. On in parenthesis (On) indicates a momentary position.
Switch Battery Heavy Duty On-Off - 3000-Bss - 661-3000F1
Up to 600A continuous rating for large diesel engines. One-piece tin-plated copper stud design never loosens over time. Terminal studs accept 1/2" or M12 ring terminals. Ignition protected and UL Listed. Selector features make-before-break contact design. AFD ( Alternator Field Disconnect models allow switching while running the engine without damaging the alternator. Cranking Rating 30 sec.: 1750A DCCranking Rating 1 min.: 1325AIntermittent Rating 5 min.: 900AContinuous Rating: 600A
St Blade Fuse Block W/Independent Circuits - 5035-Bss - 661-5035F1
Compact ATO®/ATC® fuse block consolidates branch circuits and eliminates the tangle of in-line fuses. Includes a clear insulating cover with label recesses. Uses Blue Sea small format labels and offers storage for one fuse, satisfies ABYC/USCG insulation requirements. Independent circuits allow some 24-hour and some switched circuits in the same block. Tin-plated copper buses and fuse clips. 32 Volts maximum.
Side Entry Cable Clamp W/White Cap - 1007-Bss - 661-1007F1
Provides a waterproof side entry for antenna cables without requiring removal of the factory installed connector. Simple one-piece design for easy side mount installationsLow profile, contoured edge reduces the risk of tangling linesA polished stainless steel dress cap conceals mounting hardware, matches other deck hardware and offers protection from UVIncludes all fastenersFor use above the waterline only
Side Entry Cable Clamp W/Ss Dress Cap - 1007100-Bss - 661-1007100F1
Provides a waterproof side entry for antenna cables without requiring removal of the factory installed connector. Stainless steel dress cap conceals mounting hardware and matches stainless steel deck fittings. Simple one-piece design for easy side mount installationsLow profile, contoured edge reduces the risk of tangling linesA polished stainless steel dress cap conceals mounting hardware, matches other deck hardware and offers protection from UVIncludes all fastenersFor use above the waterline only
Si Series Automatic Charging Relay - 7610-Bss - 661-7610F1
(Start Isolation)Automatically manages the charging of two battery banks and isolates batteries during starting to protect sensitive electronics. 120 Amp continuous rating supports high-output alternators. LED light indicates when batteries are combined with option for remote indicator. Cover side and bottom breakouts for power cable connections. One-piece tin-plated copper stud design never loosens over time. For use on 12 or 24 Volt DC Systems.
Rotating Battery Cable Caps - 4001-Bss - 661-4001F1
For batteries with integral marine wing nut posts. Top rotates 360 degrees to allow entry from any angle. Sold as a pair. Red/Black.
Push Button Switch - 8200-Bss - 661-8200F1
For applications such as starters, bilge pumps, horns, wipers and engine controls where switching, in addition to circuit protection is required. All panel switches mount in Blue-Sea A series breaker panels. Supplied with mounting adapter for standard 5/8" circuit breaker mounting hole. Nickel-plated brass and phenolic non-corrosive construction. White actuator. Rated 15A @ 32V DC or 125V AC, 10A @ 250V AC. 1/4" Tab terminals. On in parenthesis (On) indicates a momentary position.
Progressive Industries Class T Fuse Block With Insulating Cover, 400A - 5502100-Bss - 661-5502100F1
Allows the use of Class T fuses for fast acting circuit protection of inverters and other electronics. Four stud design provides ample access around connecting stud to install large cable lugs without obstruction from the fuseInsulating cover satisfies ABYC/USCG insulation requirementsCover breakouts allow wire access in any directionStud design ensures secure fuse mounting even with high heatStainless steel studs provide resistance to corrosion and high torqueOne-piece stainless flange nuts ensure safe and secure connectionsUL 94-V0 base resists high heat
Progressive Industries Class T Fuse Block With Insulating Cover, 200A - 5007100-Bss - 661-5007100F1
Allows the use of Class T fuses for fast acting circuit protection of inverters and other electronics. Four stud design provides ample access around connecting stud to install large cable lugs without obstruction from the fuseInsulating cover satisfies ABYC/USCG insulation requirementsCover breakouts allow wire access in any directionStud design ensures secure fuse mounting even with high heatStainless steel studs provide resistance to corrosion and high torqueOne-piece stainless flange nuts ensure safe and secure connectionsUL 94-V0 base resists high heat
Powerpost Dual 5/15 X 3/8 Stud - 2018-Bss - 661-2018F1
Connect high amperage cables securely. Includes insulator caps. 48 volts DC maximum.
Powerbar 600 Amp Bus - 2104-Bss - 661-2104F1
Features tin-plated copper bus with stainless steel hardware. The highest amperage busbar available. Ideal for main DC negative or positive bus on larger boats.
Power Post Plus 5/16" - 2102-Bss - 661-2102F1
Additional bus bar allows small wire connections at high amperage cable connectors. 48 volts DC maximum.8ea. #8 terminal screws. Includes insulator.
Power Post Plus 3/8" - 2103-Bss - 661-2103F1
Additional bus bar allows small wire connections at high amperage cable connectors. 48 volts DC maximum.8ea. #8 terminal screws. Includes insulator.
Power Post Plus - 2101-Bss - 661-2101F1
Additional bus bar allows small wire connections at high amperage cable connectors. 48 volts DC maximum.8ea. #8 terminal screws. Includes insulator.
Power Post 5/16" - 2002-Bss - 661-2002F1
Connect high amperage cables securely. Includes insulator caps. 48 volts DC maximum.
Power Post 3/8" - 2003-Bss - 661-2003F1
Connect high amperage cables securely. Includes insulator caps. 48 volts DC maximum. Posts have no amperage rating because amperage flows between terminals stacked on the post and is determined by the wire and terminals used.
Power Post 1/4" - 2011-Bss - 661-2011F1
Connect high amperage cables securely. Includes insulator caps. 48 volts DC maximum. Posts have no amperage rating because amperage flows between terminals stacked on the post and is determined by the wire and terminals used.
Power Post 1/4" - 2001-Bss - 661-2001F1
Connect high amperage cables securely. Includes insulator caps. 48 volts DC maximum.
Power Post #10 - 2010-Bss - 661-2010F1
Connect high amperage cables securely. Includes insulator caps. 48 volts DC maximum.
Panelback 5-1/4" X 7-1/2" X 3" - 4027-Bss - 661-4027F1
Provide electrical insulation for exposed panel backs and mechanical protection for panel backs protruding into lockers. Made of lightweight material for easy drilling for wire entrance and exit.
Panelback 5-1/4" X 3-3/4" X 3" - 4026-Bss - 661-4026F1
Provide electrical insulation for exposed panel backs and mechanical protection for panel backs protruding into lockers. Made of lightweight material for easy drilling for wire entrance and exit.
Minibus 5X8-32 Common Bus - 2304-Bss - 661-2304F1
Great for limited space applications in electronics cabinets and under dashboards. Features tin-plated copper bus and stainless steel hardware. Continuous amperage of 100 Amps and maximum volts of 48DC.
Minibus 4X10-24 Stud Common - 2305-Bss - 661-2305F1
Great for limited space applications in electronics cabinets and under dashboards. Features tin-plated copper bus and stainless steel hardware. Continuous amperage of 100 Amps and maximum volts of 48DC.
Mini Bus 5X8-32 Common W/Cover - 2314-Bss - 661-2314F1
Great for limited space applications in electronics cabinets and under dashboards. Features tin-plated copper bus and stainless steel hardware. Continuous amperage of 100 Amps and maximum volts of 48DC.
Mini Bus 4X10-24 Stud W/Cover - 2315-Bss - 661-2315F1
Great for limited space applications in electronics cabinets and under dashboards. Features tin-plated copper bus and stainless steel hardware. Continuous amperage of 100 Amps and maximum volts of 48DC.
Mini Add-A-Battery - 7649-Bss - 661-7649F1
The Add-A-Battery includes a Dual Circuit Plus™ Battery Switch and an automatic charging relay. These components simplify switching and automate charging, so that all you have to do is turn the battery switch ON and when you board and OFF when you leave. For outboard and inboard powered boats. Includes #6011 M-Series mini dual circuit plus battery switch and #7601 automatic charging relay.
M-Lvd Low Voltage Disconnect Battery Saver - 7635-Bss - 661-7635F1
Don't get stranded with a dead battery! Senses low battery voltage and automatically disconnects devices to save power for starting or to preserve battery life. The m-LVD senses low battery voltage and automatically disconnects non-essential devices to save power for starting or to preserve battery life. The m-LVD is ideal for any single battery boat or vehicle that wants to avoid getting stranded with a dead battery. Status light in both m-LVD and remote control switch provides visual warning of low voltage state prior to disconnect. Alarm output available for audible warning of low voltage state prior to disconnect (optional alarm required). Handles 12V battery systems and up to 65 amps of current.Remote Control Switch Functions: Disconnect Voltage Adjustment - Sets desired disconnect voltageOverride - Temporarily delays circuit disconnect for 10 minutesOFF - Temporarily disconnects circuits until voltage rises
M-Acr Automatic Charging Relay - 7601-Bss - 661-7601F1
Automatically combines two battery banks during charging and isolates batteries during discharge or starting to protect sensitive electronics. LED light indicates ACR states. Surface, rear, or front panel mounting options and a snap-on cover insulates terminal connections to prevent short circuits.
Led Red 11/64" 12Vac - 8171-Bss - 661-8171F1
Easily installed in any Blue Sea Panel. Simple push-in installation mounts in any thickness material. Useful as general indicator and alarm lights. 11/64" mounting hole size.
Led Red 11/61" 120 Vac - 8066-Bss - 661-8066F1
Easily installed in any Blue Sea Panel. Simple push-in installation mounts in any thickness material. Useful as general indicator and alarm lights. 11/64" mounting hole size.
Led Green 11/64" 120 Vac - 8034-Bss - 661-8034F1
Easily installed in any Blue Sea Panel. Simple push-in installation mounts in any thickness material. Useful as general indicator and alarm lights. 11/64" mounting hole size.
Led Green 11/34" 12Vac - 8172-Bss - 661-8172F1
Easily installed in any Blue Sea Panel. Simple push-in installation mounts in any thickness material. Useful as general indicator and alarm lights. 11/64" mounting hole size.
Led Amber 11/64" 12Vac - 8033-Bss - 661-8033F1
Easily installed in any Blue Sea Panel. Simple push-in installation mounts in any thickness material. Useful as general indicator and alarm lights. 11/64" mounting hole size.
