Shields Hose
Straight Maile Sanitation Hose Fitting - N800-1180 - 88-8001180F1
Fiberglass reinforced nylon fittings designed to fit series 101, 105 and series 144 and 148 hoses without heating or special tools. For use in sanitation systems, deck drain systems and water tank fill. Chemical and fuel resistant.
Straight Maile Sanitation Hose Fitting - N800-0340 - 88-8000340F1
Fiberglass reinforced nylon fittings designed to fit series 101, 105 and series 144 and 148 hoses without heating or special tools. For use in sanitation systems, deck drain systems and water tank fill. Chemical and fuel resistant.
Sierra Marine 45° Epdm Rubber Hump Hose, 4" - 16-245-4000-1 - 88-24540001F1
100% High temperature EPDM rubber. Maximum operating temperature 250°F (121°C).
Sierra Marine 45° Epdm Rubber Hump Hose, 3" - 16-245-3000-1 - 88-24530001F1
100% High temperature EPDM rubber. Maximum operating temperature 250°F (121°C).
Sierra Marine 45° Epdm Rubber Hump Hose, 3-1/2" - 16-245-3120-1 - 88-24531201F1
100% High temperature EPDM rubber. Maximum operating temperature 250°F (121°C).
Shields Marine Water Heater Series 1300 50' Hose - 16-130-0586 - 88-1300586F1
Use for engine heater, heat exchanger, and A/C circulation applications. Also good for sink, icebox, shower and livewell drain lines and heavy duty toilet intake hose. EPDM tube and cover, fabric reinforced. Resistant to: mild chemicals, heat, cold, ozone, saltwater. Temperature range: -40°F to +190°F.
Shields Marine Water Heater Series 1300 50' Hose - 16-130-0346 - 88-1300346F1
Use for engine heater, heat exchanger, and A/C circulation applications. Also good for sink, icebox, shower and livewell drain lines and heavy duty toilet intake hose. EPDM tube and cover, fabric reinforced. Resistant to: mild chemicals, heat, cold, ozone, saltwater. Temperature range: -40°F to +190°F.
Shields Marine Water Heater Series 1300 50' Hose - 16-130-0126 - 88-1300126F1
Use for engine heater, heat exchanger, and A/C circulation applications. Also good for sink, icebox, shower and livewell drain lines and heavy duty toilet intake hose. EPDM tube and cover, fabric reinforced. Resistant to: mild chemicals, heat, cold, ozone, saltwater. Temperature range: -40°F to +190°F.
Shields Marine Vac Extra Heavy Duty Industrial Grade Hose - 16-146-2000S - 88-1462000F1
Shields Vac Extra Heavy Duty/Commercial Grade Hose has a smooth cover and clear FDA formula PVC with a white vinyl helix. It is rated for full vacuum and is resistant to mild chemicals and saltwater. This hose is primarily used for bilge pump intake and discharge, potable water tank fill, drains (sinks, shower, and scupper), livewell intake and drain, and sanitation (intake, vent and pump out). This hose is utilized for below the waterline connections.Do not use ethylene glycol based antifreeze in hose. Do not use in pressurized water systems.
Shields Marine Vac Extra Heavy Duty Industrial Grade Hose - 16-146-1126 - 88-1461126F1
Shields Vac Extra Heavy Duty/Commercial Grade Hose has a smooth cover and clear FDA formula PVC with a white vinyl helix. It is rated for full vacuum and is resistant to mild chemicals and saltwater. This hose is primarily used for bilge pump intake and discharge, potable water tank fill, drains (sinks, shower, and scupper), livewell intake and drain, and sanitation (intake, vent and pump out). This hose is utilized for below the waterline connections.Do not use ethylene glycol based antifreeze in hose. Do not use in pressurized water systems.
Shields Marine Vac Extra Heavy Duty Industrial Grade Hose - 16-146-1120S - 88-1461120F1
Shields Vac Extra Heavy Duty/Commercial Grade Hose has a smooth cover and clear FDA formula PVC with a white vinyl helix. It is rated for full vacuum and is resistant to mild chemicals and saltwater. This hose is primarily used for bilge pump intake and discharge, potable water tank fill, drains (sinks, shower, and scupper), livewell intake and drain, and sanitation (intake, vent and pump out). This hose is utilized for below the waterline connections.Do not use ethylene glycol based antifreeze in hose. Do not use in pressurized water systems.
Shields Marine Vac Extra Heavy Duty Industrial Grade Hose - 16-146-0346 - 88-1460346F1
Shields Vac Extra Heavy Duty/Commercial Grade Hose has a smooth cover and clear FDA formula PVC with a white vinyl helix. It is rated for full vacuum and is resistant to mild chemicals and saltwater. This hose is primarily used for bilge pump intake and discharge, potable water tank fill, drains (sinks, shower, and scupper), livewell intake and drain, and sanitation (intake, vent and pump out). This hose is utilized for below the waterline connections.Do not use ethylene glycol based antifreeze in hose. Do not use in pressurized water systems.
Shields Marine Type A2 Series 355 Fuel Fill Hose - 1.5" Id & 1-57/64" Od - 16-355-1125 - 88-3551125F1
Type A2. Premium quality fire retardant marine fuel hose designed to handle alcohol enhanced gasoline. Compounded for low permeation. Reinforced with wire helix imbedded between plies of HD synthetic cord. Abrasion resistant. Meets SAE J1527 Type A2 and ISO 7840 Type A2 NMMA and CE type accepted.
Shields Marine Type A2 Series 355 Fuel Fill Hose - 1.5" Id & 1-57/64" Od - 16-355-1124 - 88-3551124F1
Type A2. Premium quality fire retardant marine fuel hose designed to handle alcohol enhanced gasoline. Compounded for low permeation. Reinforced with wire helix imbedded between plies of HD synthetic cord. Abrasion resistant. Meets SAE J1527 Type A2 and ISO 7840 Type A2 NMMA and CE type accepted.
Shields Marine Type A2 Series 355 Fuel Fill Hose - 1.5" Id & 1-57/64" Od - 16-355-1123 - 88-3551123F1
Type A2. Premium quality fire retardant marine fuel hose designed to handle alcohol enhanced gasoline. Compounded for low permeation. Reinforced with wire helix imbedded between plies of HD synthetic cord. Abrasion resistant. Meets SAE J1527 Type A2 and ISO 7840 Type A2 NMMA and CE type accepted.
Shields Marine Type A2 Series 355 Fuel Fill Hose - 1.5" Id & 1-57/64" Od - 16-355-1120S - 88-3551120F1
Type A2. Premium quality fire retardant marine fuel hose designed to handle alcohol enhanced gasoline. Compounded for low permeation. Reinforced with wire helix imbedded between plies of HD synthetic cord. Abrasion resistant. Meets SAE J1527 Type A2 and ISO 7840 Type A2 NMMA and CE type accepted.
Shields Marine Type A2 Series 350 Fuel Fill Hose - 16-350-2004 - 88-3502004F1
Type A2. Premium quality fire retardant marine fuel hose designed to handle alcohol enhanced gasoline. Compounded for low permeation. Reinforced with wire helix imbedded between plies of HD synthetic cord. Abrasion resistant. Meets SAE J1527 Type A2 and ISO 7840 Type A2 NMMA and CE type accepted.
Shields Marine Type A2 Series 350 Fuel Fill Hose - 16-350-2003 - 88-3502003F1
Type A2. Premium quality fire retardant marine fuel hose designed to handle alcohol enhanced gasoline. Compounded for low permeation. Reinforced with wire helix imbedded between plies of HD synthetic cord. Abrasion resistant. Meets SAE J1527 Type A2 and ISO 7840 Type A2 NMMA and CE type accepted.
Shields Marine Type A2 Series 350 Fuel Fill Hose - 16-350-1783 - 88-3501783F1
Type A2. Premium quality fire retardant marine fuel hose designed to handle alcohol enhanced gasoline. Compounded for low permeation. Reinforced with wire helix imbedded between plies of HD synthetic cord. Abrasion resistant. Meets SAE J1527 Type A2 and ISO 7840 Type A2 NMMA and CE type accepted.
Shields Marine Type A2 Fire Acol Series 369 Fuel Vent Hose - 5/8" Id & 31/32" Od - 50# Working Pressure - 16-369-0586 - 88-3690586F1
Meets USCG SAE J1527 Type A2. Shields fire-acol fuel vent hose resists gasoline/alcohol blended fuel and is fire resistant. It has a weather/UV resistant NBR/PVC cover. This hose is primarily used for fuel vent lines (gasoline up to 85% ethanol blended fuel, diesel fuel). For pleasure boats.ISO 7840 Type A2NMMA/CE type acceptedTemperature range: -20°F to 160°F
Shields Marine Type A2 Fire Acol Series 369 Fuel Vent Hose - 5/8" Id & 31/32" Od - 50# Working Pressure - 16-369-0585 - 88-3690585F1
Meets USCG SAE J1527 Type A2. Shields fire-acol fuel vent hose resists gasoline/alcohol blended fuel and is fire resistant. It has a weather/UV resistant NBR/PVC cover. This hose is primarily used for fuel vent lines (gasoline up to 85% ethanol blended fuel, diesel fuel). For pleasure boats.ISO 7840 Type A2NMMA/CE type acceptedTemperature range: -20°F to 160°F
Shields Marine Type A2 Fire Acol Series 369 Fuel Vent Hose - 5/8" Id & 31/32" Od - 50# Working Pressure - 16-369-0583 - 88-3690583F1
Meets USCG SAE J1527 Type A2. Shields fire-acol fuel vent hose resists gasoline/alcohol blended fuel and is fire resistant. It has a weather/UV resistant NBR/PVC cover. This hose is primarily used for fuel vent lines (gasoline up to 85% ethanol blended fuel, diesel fuel). For pleasure boats.ISO 7840 Type A2NMMA/CE type acceptedTemperature range: -20°F to 160°F
Shields Marine Type A1-15 Low Permeation Series 368 Fuel Hose - 100# Working Pressure - 16-368-0566 - 88-3680566F1
SAE J1527 Type A1-15 - ISO 7840. Low permeation fuel hose has a plastic barrier veneer with NBR outer layer tube to limit permeation. Polyester reinforced and complies with EPA and CARB low permeation requirements. Weather/UV resistant NBR/PVC cover. Fuel feed - gasoline up to 85% ethanol blended fuels / diesel / bio-diesel all blendsMeets USCG Type A1-15 requirements for pleasure boatsISO 7840 Type A1NMMA/CE type acceptedTemperature range: -20°F to 212°F
Shields Marine Type A1-15 Low Permeation Series 368 Fuel Hose - 100# Working Pressure - 16-368-0565 - 88-3680565F1
SAE J1527 Type A1-15 - ISO 7840. Low permeation fuel hose has a plastic barrier veneer with NBR outer layer tube to limit permeation. Polyester reinforced and complies with EPA and CARB low permeation requirements. Weather/UV resistant NBR/PVC cover. Fuel feed - gasoline up to 85% ethanol blended fuels / diesel / bio-diesel all blendsMeets USCG Type A1-15 requirements for pleasure boatsISO 7840 Type A1NMMA/CE type acceptedTemperature range: -20°F to 212°F
Shields Marine Type A1-15 Low Permeation Series 368 Fuel Hose - 100# Working Pressure - 16-368-0563 - 88-3680563F1
SAE J1527 Type A1-15Low Permeation Marine Fuel Hose has a plastic barrier veneer with an NBR outer layer tube to prevent permeation. This polyester reinforced hose complies with EPA and CARB very low permeation requirements and is weather/ UV resistant. This hose is primarily used for fuel feed (gasoline up to 85% ethanol blended fuels, diesel, all bio-diesel blends). It meets USCG Type A1 - 15 requirements for pleasure boats. Temperature ranges from -20°F to 212°F. 2 year emission performance warranty.
Shields Marine Type A1-15 Low Permeation Series 368 Fuel Hose - 100# Working Pressure - 16-368-0386 - 88-3680386F1
SAE J1527 Type A1-15 - ISO 7840. Low permeation fuel hose has a plastic barrier veneer with NBR outer layer tube to limit permeation. Polyester reinforced and complies with EPA and CARB low permeation requirements. Weather/UV resistant NBR/PVC cover. Fuel feed - gasoline up to 85% ethanol blended fuels / diesel / bio-diesel all blendsMeets USCG Type A1-15 requirements for pleasure boatsISO 7840 Type A1NMMA/CE type acceptedTemperature range: -20°F to 212°F
Shields Marine Type A1-15 Low Permeation Series 368 Fuel Hose - 100# Working Pressure - 16-368-0385 - 88-3680385F1
SAE J1527 Type A1-15 - ISO 7840. Low permeation fuel hose has a plastic barrier veneer with NBR outer layer tube to limit permeation. Polyester reinforced and complies with EPA and CARB low permeation requirements. Weather/UV resistant NBR/PVC cover. Fuel feed - gasoline up to 85% ethanol blended fuels / diesel / bio-diesel all blendsMeets USCG Type A1-15 requirements for pleasure boatsISO 7840 Type A1NMMA/CE type acceptedTemperature range: -20°F to 212°F
Shields Marine Type A1-15 Low Permeation Series 368 Fuel Hose - 100# Working Pressure - 16-368-0383 - 88-3680383F1
SAE J1527 Type A1-15 - ISO 7840. Low permeation fuel hose has a plastic barrier veneer with NBR outer layer tube to limit permeation. Polyester reinforced and complies with EPA and CARB low permeation requirements. Weather/UV resistant NBR/PVC cover. Fuel feed - gasoline up to 85% ethanol blended fuels / diesel / bio-diesel all blendsMeets USCG Type A1-15 requirements for pleasure boatsISO 7840 Type A1NMMA/CE type acceptedTemperature range: -20°F to 212°F
Shields Marine Type A1-15 Low Permeation Series 368 Fuel Hose - 100# Working Pressure - 16-368-0380S - 88-3680380F1
SAE J1527 Type A1-15 - ISO 7840. Low permeation fuel hose has a plastic barrier veneer with NBR outer layer tube to limit permeation. Polyester reinforced and complies with EPA and CARB low permeation requirements. Weather/UV resistant NBR/PVC cover. Fuel feed - gasoline up to 85% ethanol blended fuels / diesel / bio-diesel all blendsMeets USCG Type A1-15 requirements for pleasure boatsISO 7840 Type A1NMMA/CE type acceptedTemperature range: -20°F to 212°F
Shields Marine Type A1-15 Low Permeation Series 368 Fuel Hose - 100# Working Pressure - 16-368-0146 - 88-3680146F1
SAE J1527 Type A1-15 - ISO 7840. Low permeation fuel hose has a plastic barrier veneer with NBR outer layer tube to limit permeation. Polyester reinforced and complies with EPA and CARB low permeation requirements. Weather/UV resistant NBR/PVC cover. Fuel feed - gasoline up to 85% ethanol blended fuels / diesel / bio-diesel all blendsMeets USCG Type A1-15 requirements for pleasure boatsISO 7840 Type A1NMMA/CE type acceptedTemperature range: -20°F to 212°F
Shields Marine Type A1-15 Low Permeation Series 368 Fuel Hose - 100# Working Pressure - 16-368-0145 - 88-3680145F1
SAE J1527 Type A1-15 - ISO 7840. Low permeation fuel hose has a plastic barrier veneer with NBR outer layer tube to limit permeation. Polyester reinforced and complies with EPA and CARB low permeation requirements. Weather/UV resistant NBR/PVC cover. Fuel feed - gasoline up to 85% ethanol blended fuels / diesel / bio-diesel all blendsMeets USCG Type A1-15 requirements for pleasure boatsISO 7840 Type A1NMMA/CE type acceptedTemperature range: -20°F to 212°F
Shields Marine Type A1-15 Low Permeation Series 368 Fuel Hose - 100# Working Pressure - 16-368-0126 - 88-3680126F1
SAE J1527 Type A1-15 - ISO 7840. Low permeation fuel hose has a plastic barrier veneer with NBR outer layer tube to limit permeation. Polyester reinforced and complies with EPA and CARB low permeation requirements. Weather/UV resistant NBR/PVC cover. Fuel feed - gasoline up to 85% ethanol blended fuels / diesel / bio-diesel all blendsMeets USCG Type A1-15 requirements for pleasure boatsISO 7840 Type A1NMMA/CE type acceptedTemperature range: -20°F to 212°F
Shields Marine Type A1-15 Low Permeation Series 368 Fuel Hose - 100# Working Pressure - 16-368-0125 - 88-3680125F1
SAE J1527 Type A1-15 - ISO 7840. Low permeation fuel hose has a plastic barrier veneer with NBR outer layer tube to limit permeation. Polyester reinforced and complies with EPA and CARB low permeation requirements. Weather/UV resistant NBR/PVC cover. Fuel feed - gasoline up to 85% ethanol blended fuels / diesel / bio-diesel all blendsMeets USCG Type A1-15 requirements for pleasure boatsISO 7840 Type A1NMMA/CE type acceptedTemperature range: -20°F to 212°F
Shields Marine Straight Epdm Rubber Hump Hose, 4" - 16-220-4000-1 - 88-22040001F1
100% High temperature EPDM rubber. Maximum operating temperature 250° F (121° C).
Shields Marine Straight Epdm Rubber Hump Hose, 3" - 16-220-3000-1 - 88-22030001F1
100% High temperature EPDM rubber. Maximum operating temperature 250°F (121°C).
Shields Marine Straight Epdm Rubber Hump Hose, 3-1/2" - 16-220-3120-1 - 88-22031201F1
100% High temperature EPDM rubber. Maximum operating temperature 250°F (121°C).
Shields Marine Split Wire Conduit Flexible Flame Retardant Black 50' Hose - 16-128-1146B - 88-1281146Bf1
Flame retardant. Provides chafing and quality appearance in marine wiring systems. Complies with ABYC standard 8.15.19. Meets UL94 V2 standard. High abrasion resistance. Temperature rated to 275° F. Black with Blue stripe.
Shields Marine Split Wire Conduit Flexible Flame Retardant Black 50' Hose - 16-128-1126B - 88-1281126Bf1
Flame retardant. Provides chafing and quality appearance in marine wiring systems. Complies with ABYC standard 8.15.19. Meets UL94 V2 standard. High abrasion resistance. Temperature rated to 275° F. Black with Blue stripe.
Shields Marine Split Wire Conduit Flexible Flame Retardant Black 50' Hose - 16-128-1006B-1 - 88-1281006B1F1
Flame retardant. Provides chafing and quality appearance in marine wiring systems. Complies with ABYC standard 8.15.19. Meets UL94 V2 standard. High abrasion resistance. Temperature rated to 275° F. Black with Blue stripe.
Shields Marine Split Wire Conduit Flexible Flame Retardant Black 50' Hose - 16-128-0586B-1 - 88-1280586B1F1
Flame retardant. Provides chafing and quality appearance in marine wiring systems. Complies with ABYC standard 8.15.19. Meets UL94 V2 standard. High abrasion resistance. Temperature rated to 275° F. Black with Blue stripe.
Shields Marine Split Wire Conduit Flexible Flame Retardant Black 50' Hose - 16-128-0386B-1 - 88-1280386B1F1
Flame retardant. Provides chafing and quality appearance in marine wiring systems. Complies with ABYC standard 8.15.19. Meets UL94 V2 standard. High abrasion resistance. Temperature rated to 275° F. Black with Blue stripe.
Shields Marine Split Wire Conduit Flexible Flame Retardant Black 50' Hose - 16-128-0346B-1 - 88-1280346B1F1
Flame retardant. Provides chafing and quality appearance in marine wiring systems. Complies with ABYC standard 8.15.19. Meets UL94 V2 standard. High abrasion resistance. Temperature rated to 275° F. Black with Blue stripe.
Shields Marine Split Wire Conduit Flexible Flame Retardant Black 50' Hose - 16-128-0146B-1 - 88-1280146B1F1
Flame retardant. Provides chafing and quality appearance in marine wiring systems. Complies with ABYC standard 8.15.19. Meets UL94 V2 standard. High abrasion resistance. Temperature rated to 275° F. Black with Blue stripe.
Shields Marine Split Wire Conduit Flexible Flame Retardant Black 50' Hose - 16-128-0126B-1 - 88-1280126B1F1
Flame retardant. Provides chafing and quality appearance in marine wiring systems. Complies with ABYC standard 8.15.19. Meets UL94 V2 standard. High abrasion resistance. Temperature rated to 275° F. Black with Blue stripe.
Shields Marine Silverado 2000 Type B2 Outboard Fuel & Vent Series 315 Hose | 5/8" Id & 29/32" Od - 16-315-0586 - 88-3150586 Superseded By: 88-3690586F1
Premium quality fuel hose designed for outboard feed and vent lines for pleasure craft. Outside engine compartment use only. Features UV resistant, all rubber construction, low temperature flexibility (-5° F to 180° F) superior weather resistance, and resistance to gasoline/alcohol blends. Complies with SAE J1527 Type B2 specifications. EPA regulations do not allow use of this product in new detachable fuel line assemblies.
Shields Marine Shieldsflex Water Exhaust Series 250 Hose With Wire, 3" X 6-1/4' - 16-250-3001 - 88-2503001F1
Use for engine intake and wet exhaust connections where bends or long lengths are required. Also good for bilge pump intake/discharge, scupper lines, toilet intake/discharge, and holding tank vent and pump out. Black synthetic rubber tube and cover, reinforced with wire helix imbedded between plies of HD synthetic cord. Resistant to: exhaust fumes, ozone, mild chemicals, antifreeze, salt water, abrasion and odor permeation. Temperature range: -20° F to 200° F continuous, +250° F intermittent. Meets SAE J2006 Type R2.
Shields Marine Shieldsflex Water Exhaust Series 250 Hose With Wire, 3" X 4' - 16-250-3000-48 - 88-250300048F1
Use for engine intake and wet exhaust connections where bends or long lengths are required. Also good for bilge pump intake/discharge, scupper lines, toilet intake/discharge, and holding tank vent and pump out. Black synthetic rubber tube and cover, reinforced with wire helix imbedded between plies of HD synthetic cord. Resistant to: exhaust fumes, ozone, mild chemicals, antifreeze, salt water, abrasion and odor permeation. Temperature range: -20° F to 200° F continuous, +250° F intermittent. Meets SAE J2006 Type R2.
Shields Marine Shieldsflex Water Exhaust Series 250 Hose With Wire, 3" X 2' - 16-250-3000-24 - 88-250300024F1
Use for engine intake and wet exhaust connections where bends or long lengths are required. Also good for bilge pump intake/discharge, scupper lines, toilet intake/discharge, and holding tank vent and pump out. Black synthetic rubber tube and cover, reinforced with wire helix imbedded between plies of HD synthetic cord. Resistant to: exhaust fumes, ozone, mild chemicals, antifreeze, salt water, abrasion and odor permeation. Temperature range: -20° F to 200° F continuous, +250° F intermittent. Meets SAE J2006 Type R2.
Shields Marine Shieldsflex Water Exhaust Series 250 Hose With Wire, 3" X 12-1/2' - 16-250-3004 - 88-2503004F1
Use for engine intake and wet exhaust connections where bends or long lengths are required. Also good for bilge pump intake/discharge, scupper lines, toilet intake/discharge, and holding tank vent and pump out. Black synthetic rubber tube and cover, reinforced with wire helix imbedded between plies of HD synthetic cord. Resistant to: exhaust fumes, ozone, mild chemicals, antifreeze, salt water, abrasion and odor permeation. Temperature range: -20° F to 200° F continuous, +250° F intermittent. Meets SAE J2006 Type R2.
Shields Marine Shieldsflex Water Exhaust Series 250 Hose With Wire, 3" X 10' - 16-250-3003 - 88-2503003F1
Use for engine intake and wet exhaust connections where bends or long lengths are required. Also good for bilge pump intake/discharge, scupper lines, toilet intake/discharge, and holding tank vent and pump out. Black synthetic rubber tube and cover, reinforced with wire helix imbedded between plies of HD synthetic cord. Resistant to: exhaust fumes, ozone, mild chemicals, antifreeze, salt water, abrasion and odor permeation. Temperature range: -20° F to 200° F continuous, +250° F intermittent. Meets SAE J2006 Type R2.
Shields Marine Shieldsflex 2 Water Exhaust Series 250 Hose With Wire, 4" X 6-1/4' - 16-250-4001 - 88-2504001F1
Use for engine intake and wet exhaust connections where bends or long lengths are required. Also good for bilge pump intake/discharge, scupper lines, toilet intake/discharge, and holding tank vent and pump out. Black synthetic rubber tube and cover, reinforced with wire helix imbedded between plies of HD synthetic cord. Resistant to: exhaust fumes, ozone, mild chemicals, antifreeze, salt water, abrasion and odor permeation. Temperature range: -20° F to 200° F continuous, +250° F intermittent. Meets SAE J2006 Type R2.
Shields Marine Shieldsflex 2 Water Exhaust Series 250 Hose With Wire, 4" X 4' - 16-250-4000-48 - 88-250400048F1
Use for engine intake and wet exhaust connections where bends or long lengths are required. Also good for bilge pump intake/discharge, scupper lines, toilet intake/discharge, and holding tank vent and pump out. Black synthetic rubber tube and cover, reinforced with wire helix imbedded between plies of HD synthetic cord. Resistant to: exhaust fumes, ozone, mild chemicals, antifreeze, salt water, abrasion and odor permeation. Temperature range: -20° F to 200° F continuous, +250° F intermittent. Meets SAE J2006 Type R2.
Shields Marine Shieldsflex 2 Water Exhaust Series 250 Hose With Wire, 4" X 2' - 16-250-4000-24 - 88-250400024F1
Use for engine intake and wet exhaust connections where bends or long lengths are required. Also good for bilge pump intake/discharge, scupper lines, toilet intake/discharge, and holding tank vent and pump out. Black synthetic rubber tube and cover, reinforced with wire helix imbedded between plies of HD synthetic cord. Resistant to: exhaust fumes, ozone, mild chemicals, antifreeze, salt water, abrasion and odor permeation. Temperature range: -20° F to 200° F continuous, +250° F intermittent. Meets SAE J2006 Type R2.
Shields Marine Shieldsflex 2 Water Exhaust Series 250 Hose With Wire, 4" X 12-1/2' - 16-250-4004 - 88-2504004F1
Use for engine intake and wet exhaust connections where bends or long lengths are required. Also good for bilge pump intake/discharge, scupper lines, toilet intake/discharge, and holding tank vent and pump out. Black synthetic rubber tube and cover, reinforced with wire helix imbedded between plies of HD synthetic cord. Resistant to: exhaust fumes, ozone, mild chemicals, antifreeze, salt water, abrasion and odor permeation. Temperature range: -20° F to 200° F continuous, +250° F intermittent. Meets SAE J2006 Type R2.
Shields Marine Shieldsflex 2 Water Exhaust Series 250 Hose With Wire, 4" X 10' - 16-250-4003 - 88-2504003F1
Use for engine intake and wet exhaust connections where bends or long lengths are required. Also good for bilge pump intake/discharge, scupper lines, toilet intake/discharge, and holding tank vent and pump out. Black synthetic rubber tube and cover, reinforced with wire helix imbedded between plies of HD synthetic cord. Resistant to: exhaust fumes, ozone, mild chemicals, antifreeze, salt water, abrasion and odor permeation. Temperature range: -20° F to 200° F continuous, +250° F intermittent. Meets SAE J2006 Type R2.
Shields Marine Shieldsflex 2 Water Exhaust Series 250 Hose With Wire - 16-250-5000-48 - 88-250500048F1
Use for engine intake and wet exhaust connections where bends or long lengths are required. Also good for bilge pump intake/discharge, scupper lines, toilet intake/discharge, and holding tank vent and pump out. Black synthetic rubber tube and cover, reinforced with wire helix imbedded between plies of HD synthetic cord. Resistant to: exhaust fumes, ozone, mild chemicals, antifreeze, salt water, abrasion and odor permeation. Temperature range: -20° F to 200° F continuous, +250° F intermittent. Meets SAE J2006 Type R2.
Shields Marine Shieldsflex 2 Water Exhaust Series 250 Hose With Wire - 16-250-5000-24 - 88-250500024F1
Use for engine intake and wet exhaust connections where bends or long lengths are required. Also good for bilge pump intake/discharge, scupper lines, toilet intake/discharge, and holding tank vent and pump out. Black synthetic rubber tube and cover, reinforced with wire helix imbedded between plies of HD synthetic cord. Resistant to: exhaust fumes, ozone, mild chemicals, antifreeze, salt water, abrasion and odor permeation. Temperature range: -20° F to 200° F continuous, +250° F intermittent. Meets SAE J2006 Type R2.
Shields Marine Shieldsflex 2 Water Exhaust Series 250 Hose With Wire - 16-250-3120-48 - 88-250312048F1
Use for engine intake and wet exhaust connections where bends or long lengths are required. Also good for bilge pump intake/discharge, scupper lines, toilet intake/discharge, and holding tank vent and pump out. Black synthetic rubber tube and cover, reinforced with wire helix imbedded between plies of HD synthetic cord. Resistant to: exhaust fumes, ozone, mild chemicals, antifreeze, salt water, abrasion and odor permeation. Temperature range: -20° F to 200° F continuous, +250° F intermittent. Meets SAE J2006 Type R2.
Shields Marine Shieldsflex 2 Water Exhaust Series 250 Hose With Wire - 16-250-3120-24 - 88-250312024F1
Use for engine intake and wet exhaust connections where bends or long lengths are required. Also good for bilge pump intake/discharge, scupper lines, toilet intake/discharge, and holding tank vent and pump out. Black synthetic rubber tube and cover, reinforced with wire helix imbedded between plies of HD synthetic cord. Resistant to: exhaust fumes, ozone, mild chemicals, antifreeze, salt water, abrasion and odor permeation. Temperature range: -20° F to 200° F continuous, +250° F intermittent. Meets SAE J2006 Type R2.
Shields Marine Shieldsflex 2 Water Exhaust Series 250 Hose With Wire - 16-250-2784 - 88-2502784F1
Use for engine intake and wet exhaust connections where bends or long lengths are required. Also good for bilge pump intake/discharge, scupper lines, toilet intake/discharge, and holding tank vent and pump out. Black synthetic rubber tube and cover, reinforced with wire helix imbedded between plies of HD synthetic cord. Resistant to: exhaust fumes, ozone, mild chemicals, antifreeze, salt water, abrasion and odor permeation. Temperature range: -20° F to 200° F continuous, +250° F intermittent. Meets SAE J2006 Type R2.
Shields Marine Shieldsflex 2 Water Exhaust Series 250 Hose With Wire - 16-250-2384 - 88-2502384F1
Use for engine intake and wet exhaust connections where bends or long lengths are required. Also good for bilge pump intake/discharge, scupper lines, toilet intake/discharge, and holding tank vent and pump out. Black synthetic rubber tube and cover, reinforced with wire helix imbedded between plies of HD synthetic cord. Resistant to: exhaust fumes, ozone, mild chemicals, antifreeze, salt water, abrasion and odor permeation. Temperature range: -20° F to 200° F continuous, +250° F intermittent. Meets SAE J2006 Type R2.
Shields Marine Shieldsflex 2 Water Exhaust Series 250 Hose With Wire - 16-250-2344 - 88-2502344F1
Use for engine intake and wet exhaust connections where bends or long lengths are required. Also good for bilge pump intake/discharge, scupper lines, toilet intake/discharge, and holding tank vent and pump out. Black synthetic rubber tube and cover, reinforced with wire helix imbedded between plies of HD synthetic cord. Resistant to: exhaust fumes, ozone, mild chemicals, antifreeze, salt water, abrasion and odor permeation. Temperature range: -20° F to 200° F continuous, +250° F intermittent. Meets SAE J2006 Type R2.
Shields Marine Shieldsflex 2 Water Exhaust Series 250 Hose With Wire - 16-250-2144 - 88-2502144F1
Use for engine intake and wet exhaust connections where bends or long lengths are required. Also good for bilge pump intake/discharge, scupper lines, toilet intake/discharge, and holding tank vent and pump out. Black synthetic rubber tube and cover, reinforced with wire helix imbedded between plies of HD synthetic cord. Resistant to: exhaust fumes, ozone, mild chemicals, antifreeze, salt water, abrasion and odor permeation. Temperature range: -20° F to 200° F continuous, +250° F intermittent. Meets SAE J2006 Type R2.
Shields Marine Shieldsflex 2 Water Exhaust Series 250 Hose With Wire - 16-250-2124 - 88-2502124F1
Use for engine intake and wet exhaust connections where bends or long lengths are required. Also good for bilge pump intake/discharge, scupper lines, toilet intake/discharge, and holding tank vent and pump out. Black synthetic rubber tube and cover, reinforced with wire helix imbedded between plies of HD synthetic cord. Resistant to: exhaust fumes, ozone, mild chemicals, antifreeze, salt water, abrasion and odor permeation. Temperature range: -20° F to 200° F continuous, +250° F intermittent. Meets SAE J2006 Type R2.
Shields Marine Shieldsflex 2 Water Exhaust Series 250 Hose With Wire - 16-250-2120-48 - 88-250212048F1
Use for engine intake and wet exhaust connections where bends or long lengths are required. Also good for bilge pump intake/discharge, scupper lines, toilet intake/discharge, and holding tank vent and pump out. Black synthetic rubber tube and cover, reinforced with wire helix imbedded between plies of HD synthetic cord. Resistant to: exhaust fumes, ozone, mild chemicals, antifreeze, salt water, abrasion and odor permeation. Temperature range: -20° F to 200° F continuous, +250° F intermittent. Meets SAE J2006 Type R2.
Shields Marine Shieldsflex 2 Water Exhaust Series 250 Hose With Wire - 16-250-2120-24 - 88-250212024F1
Use for engine intake and wet exhaust connections where bends or long lengths are required. Also good for bilge pump intake/discharge, scupper lines, toilet intake/discharge, and holding tank vent and pump out. Black synthetic rubber tube and cover, reinforced with wire helix imbedded between plies of HD synthetic cord. Resistant to: exhaust fumes, ozone, mild chemicals, antifreeze, salt water, abrasion and odor permeation. Temperature range: -20° F to 200° F continuous, +250° F intermittent. Meets SAE J2006 Type R2.
Shields Marine Shieldsflex 2 Water Exhaust Series 250 Hose With Wire - 16-250-2004 - 88-2502004F1
Use for engine intake and wet exhaust connections where bends or long lengths are required. Also good for bilge pump intake/discharge, scupper lines, toilet intake/discharge, and holding tank vent and pump out. Black synthetic rubber tube and cover, reinforced with wire helix imbedded between plies of HD synthetic cord. Resistant to: exhaust fumes, ozone, mild chemicals, antifreeze, salt water, abrasion and odor permeation. Temperature range: -20° F to 200° F continuous, +250° F intermittent. Meets SAE J2006 Type R2.
Shields Marine Shieldsflex 2 Water Exhaust Series 250 Hose With Wire - 16-250-2000S - 88-2502000F1
Use for engine intake and wet exhaust connections where bends or long lengths are required. Also good for bilge pump intake/discharge, scupper lines, toilet intake/discharge, and holding tank vent and pump out. Black synthetic rubber tube and cover, reinforced with wire helix imbedded between plies of HD synthetic cord. Resistant to: exhaust fumes, ozone, mild chemicals, antifreeze, salt water, abrasion and odor permeation. Temperature range: -20° F to 200° F continuous, +250° F intermittent. Meets SAE J2006 Type R2.
Shields Marine Shieldsflex 2 Water Exhaust Series 250 Hose With Wire - 16-250-1784 - 88-2501784F1
Use for engine intake and wet exhaust connections where bends or long lengths are required. Also good for bilge pump intake/discharge, scupper lines, toilet intake/discharge, and holding tank vent and pump out. Black synthetic rubber tube and cover, reinforced with wire helix imbedded between plies of HD synthetic cord. Resistant to: exhaust fumes, ozone, mild chemicals, antifreeze, salt water, abrasion and odor permeation. Temperature range: -20° F to 200° F continuous, +250° F intermittent. Meets SAE J2006 Type R2.
Shields Marine Shieldsflex 2 Water Exhaust Series 250 Hose With Wire - 16-250-1584 - 88-2501584F1
Use for engine intake and wet exhaust connections where bends or long lengths are required. Also good for bilge pump intake/discharge, scupper lines, toilet intake/discharge, and holding tank vent and pump out. Black synthetic rubber tube and cover, reinforced with wire helix imbedded between plies of HD synthetic cord. Resistant to: exhaust fumes, ozone, mild chemicals, antifreeze, salt water, abrasion and odor permeation. Temperature range: -20° F to 200° F continuous, +250° F intermittent. Meets SAE J2006 Type R2.
Shields Marine Shieldsflex 2 Water Exhaust Series 250 Hose With Wire - 16-250-1384 - 88-2501384F1
Use for engine intake and wet exhaust connections where bends or long lengths are required. Also good for bilge pump intake/discharge, scupper lines, toilet intake/discharge, and holding tank vent and pump out. Black synthetic rubber tube and cover, reinforced with wire helix imbedded between plies of HD synthetic cord. Resistant to: exhaust fumes, ozone, mild chemicals, antifreeze, salt water, abrasion and odor permeation. Temperature range: -20° F to 200° F continuous, +250° F intermittent. Meets SAE J2006 Type R2.
Shields Marine Shieldsflex 2 Water Exhaust Series 250 Hose With Wire - 16-250-1344 - 88-2501344F1
Use for engine intake and wet exhaust connections where bends or long lengths are required. Also good for bilge pump intake/discharge, scupper lines, toilet intake/discharge, and holding tank vent and pump out. Black synthetic rubber tube and cover, reinforced with wire helix imbedded between plies of HD synthetic cord. Resistant to: exhaust fumes, ozone, mild chemicals, antifreeze, salt water, abrasion and odor permeation. Temperature range: -20° F to 200° F continuous, +250° F intermittent. Meets SAE J2006 Type R2.
Shields Marine Shieldsflex 2 Water Exhaust Series 250 Hose With Wire - 16-250-1184 - 88-2501184F1
Use for engine intake and wet exhaust connections where bends or long lengths are required. Also good for bilge pump intake/discharge, scupper lines, toilet intake/discharge, and holding tank vent and pump out. Black synthetic rubber tube and cover, reinforced with wire helix imbedded between plies of HD synthetic cord. Resistant to: exhaust fumes, ozone, mild chemicals, antifreeze, salt water, abrasion and odor permeation. Temperature range: -20° F to 200° F continuous, +250° F intermittent. Meets SAE J2006 Type R2.
Shields Marine Shieldsflex 2 Water Exhaust Series 250 Hose With Wire - 16-250-1144 - 88-2501144F1
Use for engine intake and wet exhaust connections where bends or long lengths are required. Also good for bilge pump intake/discharge, scupper lines, toilet intake/discharge, and holding tank vent and pump out. Black synthetic rubber tube and cover, reinforced with wire helix imbedded between plies of HD synthetic cord. Resistant to: exhaust fumes, ozone, mild chemicals, antifreeze, salt water, abrasion and odor permeation. Temperature range: -20° F to 200° F continuous, +250° F intermittent. Meets SAE J2006 Type R2.
Shields Marine Shieldsflex 2 Water Exhaust Series 250 Hose With Wire - 16-250-1140S - 88-2501140F1
Use for engine intake and wet exhaust connections where bends or long lengths are required. Also good for bilge pump intake/discharge, scupper lines, toilet intake/discharge, and holding tank vent and pump out. Black synthetic rubber tube and cover, reinforced with wire helix imbedded between plies of HD synthetic cord. Resistant to: exhaust fumes, ozone, mild chemicals, antifreeze, salt water, abrasion and odor permeation. Temperature range: -20° F to 200° F continuous, +250° F intermittent. Meets SAE J2006 Type R2.
Shields Marine Shieldsflex 2 Water Exhaust Series 250 Hose With Wire - 16-250-1124 - 88-2501124F1
Use for engine intake and wet exhaust connections where bends or long lengths are required. Also good for bilge pump intake/discharge, scupper lines, toilet intake/discharge, and holding tank vent and pump out. Black synthetic rubber tube and cover, reinforced with wire helix imbedded between plies of HD synthetic cord. Resistant to: exhaust fumes, ozone, mild chemicals, antifreeze, salt water, abrasion and odor permeation. Temperature range: -20° F to 200° F continuous, +250° F intermittent. Meets SAE J2006 Type R2.
Shields Marine Shieldsflex 2 Water Exhaust Series 250 Hose With Wire - 16-250-1120S - 88-2501120F1
Use for engine intake and wet exhaust connections where bends or long lengths are required. Also good for bilge pump intake/discharge, scupper lines, toilet intake/discharge, and holding tank vent and pump out. Black synthetic rubber tube and cover, reinforced with wire helix imbedded between plies of HD synthetic cord. Resistant to: exhaust fumes, ozone, mild chemicals, antifreeze, salt water, abrasion and odor permeation. Temperature range: -20° F to 200° F continuous, +250° F intermittent. Meets SAE J2006 Type R2.
Shields Marine Shieldsflex 2 Water Exhaust Series 250 Hose With Wire - 16-250-1004 - 88-2501004F1
Use for engine intake and wet exhaust connections where bends or long lengths are required. Also good for bilge pump intake/discharge, scupper lines, toilet intake/discharge, and holding tank vent and pump out. Black synthetic rubber tube and cover, reinforced with wire helix imbedded between plies of HD synthetic cord. Resistant to: exhaust fumes, ozone, mild chemicals, antifreeze, salt water, abrasion and odor permeation. Temperature range: -20° F to 200° F continuous, +250° F intermittent. Meets SAE J2006 Type R2.
Shields Marine Shieldsflex 2 Water Exhaust Series 250 Hose With Wire - 16-250-1000S - 88-2501000F1
Use for engine intake and wet exhaust connections where bends or long lengths are required. Also good for bilge pump intake/discharge, scupper lines, toilet intake/discharge, and holding tank vent and pump out. Black synthetic rubber tube and cover, reinforced with wire helix imbedded between plies of HD synthetic cord. Resistant to: exhaust fumes, ozone, mild chemicals, antifreeze, salt water, abrasion and odor permeation. Temperature range: -20° F to 200° F continuous, +250° F intermittent. Meets SAE J2006 Type R2.
Shields Marine Shieldsflex 2 Water Exhaust Series 250 Hose With Wire - 16-250-0784 - 88-2500784F1
Use for engine intake and wet exhaust connections where bends or long lengths are required. Also good for bilge pump intake/discharge, scupper lines, toilet intake/discharge, and holding tank vent and pump out. Black synthetic rubber tube and cover, reinforced with wire helix imbedded between plies of HD synthetic cord. Resistant to: exhaust fumes, ozone, mild chemicals, antifreeze, salt water, abrasion and odor permeation. Temperature range: -20° F to 200° F continuous, +250° F intermittent. Meets SAE J2006 Type R2.
Shields Marine Shieldsflex 2 Water Exhaust Series 250 Hose With Wire - 16-250-0584 - 88-2500584F1
Use for engine intake and wet exhaust connections where bends or long lengths are required. Also good for bilge pump intake/discharge, scupper lines, toilet intake/discharge, and holding tank vent and pump out. Black synthetic rubber tube and cover, reinforced with wire helix imbedded between plies of HD synthetic cord. Resistant to: exhaust fumes, ozone, mild chemicals, antifreeze, salt water, abrasion and odor permeation. Temperature range: -20° F to 200° F continuous, +250° F intermittent. Meets SAE J2006 Type R2.
Shields Marine Shieldsflex 2 Water Exhaust Series 250 Hose With Wire - 16-250-0580S - 88-2500580F1
Use for engine intake and wet exhaust connections where bends or long lengths are required. Also good for bilge pump intake/discharge, scupper lines, toilet intake/discharge, and holding tank vent and pump out. Black synthetic rubber tube and cover, reinforced with wire helix imbedded between plies of HD synthetic cord. Resistant to: exhaust fumes, ozone, mild chemicals, antifreeze, salt water, abrasion and odor permeation. Temperature range: -20° F to 200° F continuous, +250° F intermittent. Meets SAE J2006 Type R2.
Shields Marine Shieldsflex 2 Water Exhaust Series 250 Hose With Wire - 16-250-0344 - 88-2500344F1
Use for engine intake and wet exhaust connections where bends or long lengths are required. Also good for bilge pump intake/discharge, scupper lines, toilet intake/discharge, and holding tank vent and pump out. Black synthetic rubber tube and cover, reinforced with wire helix imbedded between plies of HD synthetic cord. Resistant to: exhaust fumes, ozone, mild chemicals, antifreeze, salt water, abrasion and odor permeation. Temperature range: -20° F to 200° F continuous, +250° F intermittent. Meets SAE J2006 Type R2.
Shields Marine Shieldsflex 2 Water Exhaust Series 250 Hose With Wire - 16-250-0340S - 88-2500340F1
Use for engine intake and wet exhaust connections where bends or long lengths are required. Also good for bilge pump intake/discharge, scupper lines, toilet intake/discharge, and holding tank vent and pump out. Black synthetic rubber tube and cover, reinforced with wire helix imbedded between plies of HD synthetic cord. Resistant to: exhaust fumes, ozone, mild chemicals, antifreeze, salt water, abrasion and odor permeation. Temperature range: -20° F to 200° F continuous, +250° F intermittent. Meets SAE J2006 Type R2.
Shields Marine Shieldsflex 2 Water Exhaust Series 250 Hose With Wire - 16-250-0124 - 88-2500124F1
Use for engine intake and wet exhaust connections where bends or long lengths are required. Also good for bilge pump intake/discharge, scupper lines, toilet intake/discharge, and holding tank vent and pump out. Black synthetic rubber tube and cover, reinforced with wire helix imbedded between plies of HD synthetic cord. Resistant to: exhaust fumes, ozone, mild chemicals, antifreeze, salt water, abrasion and odor permeation. Temperature range: -20° F to 200° F continuous, +250° F intermittent. Meets SAE J2006 Type R2.
Shields Marine Series 400 & 402 Vinylvent Ducting Hose - White - 16-400-4003-1 - 88-40040031F1
Vinylvent Ducting Hose is PVC supported by anodized wire helix. It is resistant to UV and the ozone. This hose is primarily used for venting of bilge fumes.
Shields Marine Series 400 & 402 Vinylvent Ducting Hose - White - 16-400-4000Ws - 88-4004000F1
Vinylvent Ducting Hose is PVC supported by anodized wire helix. It is resistant to UV and the ozone. This hose is primarily used for venting of bilge fumes.
Shields Marine Series 400 & 402 Vinylvent Ducting Hose - White - 16-400-3003-1 - 88-40030031F1
Vinylvent Ducting Hose is PVC supported by anodized wire helix. It is resistant to UV and the ozone. This hose is primarily used for venting of bilge fumes.
Shields Marine Series 400 & 402 Vinylvent Ducting Hose - White - 16-400-3000Ws - 88-4003000F1
Vinylvent Ducting Hose is PVC supported by anodized wire helix. It is resistant to UV and the ozone. This hose is primarily used for venting of bilge fumes.
Shields Marine Series 400 & 402 Vinylvent Ducting Hose - Black - 16-402-4003-1 - 88-40240031F1
Vinylvent Ducting Hose is PVC supported by anodized wire helix. It is resistant to UV and the ozone. This hose is primarily used for venting of bilge fumes.
Shields Marine Series 400 & 402 Vinylvent Ducting Hose - Black - 16-402-4000S - 88-4024000F1
Vinylvent Ducting Hose is PVC supported by anodized wire helix. It is resistant to UV and the ozone. This hose is primarily used for venting of bilge fumes.
Shields Marine Series 400 & 402 Vinylvent Ducting Hose - Black - 16-402-3003-1 - 88-40230031F1
Vinylvent Ducting Hose is PVC supported by anodized wire helix. It is resistant to UV and the ozone. This hose is primarily used for venting of bilge fumes.
Shields Marine Series 400 & 402 Vinylvent Ducting Hose - Black - 16-402-3000S - 88-4023000F1
Vinylvent Ducting Hose is PVC supported by anodized wire helix. It is resistant to UV and the ozone. This hose is primarily used for venting of bilge fumes.
Shields Marine Pvc Sanitation Series 144 Flexible Hose - 5" Bend - 1-1/2" Id - 16-144-1126 - 88-1441126F1
Ideal for toilet to holding tank and holding tank pump out applications. Superior resistance to odor permeation. Smooth off white PVC with vinyl helix. Contains anti fungus agent to control odor. Resistant to: mild chemicals, salt water, permeation. Do not use glycol based antifreeze in hose. Do not use for potable water. 5 Year limited warranty.
Shields Marine Premium Rubber Sanitation Series 101 Kink Resistant Flexible Hose - 1-1/2" Id - 16-101-1124 - 88-1011124F1
Designed specifically for the most critical toilet and holding tank connections. Gives excellent flexibility, bend radius and maximum resistance to odor permeation and toilet chemicals. 2 ply.
Shields Marine Premium Rubber Sanitation Series 101 Kink Resistant Flexible Hose - 1-1/2" Id - 16-101-1120S - 88-1011120F1
Designed specifically for the most critical toilet and holding tank connections. Gives excellent flexibility, bend radius and maximum resistance to odor permeation and toilet chemicals. 2 ply.
Shields Marine Poly X Sanitation Polyurethane Flexible Hose - 16-105-1124 - 88-1051124F1
The ultimate sanitation hose. Lifetime warranty against odor permeation. Combines the flexibility of a rubber hose with the ultimate permeation resistance of polyurethane. Poly X can easily be slipped over most fittings and the polyurethane cover is very abrasion resistant. Glossy cover for easy clean up.
Shields Marine Poly X Sanitation Polyurethane Flexible Hose - 16-105-1004 - 88-1051004F1
The ultimate sanitation hose. Lifetime warranty against odor permeation. Combines the flexibility of a rubber hose with the ultimate permeation resistance of polyurethane. Poly X can easily be slipped over most fittings and the polyurethane cover is very abrasion resistant. Glossy cover for easy clean up.
Shields Marine Multiflex Series 141 Flexible Hose - White - 1-1/2" Id - 16-141-1123W - 88-1411123Wf1
Ideal for bilge pump discharge hose, this hose also works for potable water tank fill and drain hose for sinks, showers, scuppers, and livewells. Clear FDA formula PVC w/vinyl helix. Flexible and abrasion resistant. Resistant to mild chemicals and salt water. Do not use glycol based antifreeze in hose. Do not attach to thru-hull fittings below the water line. For 1-1/2" couplings, use 147-1120 right hand thread cuffs.
