Taylor
Zinc Plated Gas Lift Hardware, Flat Bracket, Pair - 1880 - 32-1880F1
Ball studs can be easily swapped out on any of our mounts by simply unscrewing the existing ball stud and replacing it with the other size.
Zinc Plated Gas Lift Hardware, Angled Mounting Bracket W/Ball Stud - 1884 - 32-1884F1
Ball studs can be easily swapped out on any of our mounts by simply unscrewing the existing ball stud and replacing it with the other size.
Zinc Plated Gas Lift Hardware, Angled Bracket, Pair - 1881 - 32-1881F1
Ball studs can be easily swapped out on any of our mounts by simply unscrewing the existing ball stud and replacing it with the other size.
Zinc Plated Gas Lift Hardware, 10Mm Ball Stud Long Thread - 1893 - 32-1893F1
Ball studs can be easily swapped out on any of our mounts by simply unscrewing the existing ball stud and replacing it with the other size.
White, Small Double Molded Vinyl Dock Edging. 10' Coil - 46086 - 32-46086F1
Double molded vinyl dock edging is molded twice then molecularly bonded for extra durability and protection. A tough inner core is surrounded with our soft white vinyl for extra cushion against tough docks. Each piece installs easily to the edges of dock piers or floats with screws or nails.
White, Medium Double Molded Vinyl Dock Edging. 10' Straight - 46062 - 32-46062F1
Double molded vinyl dock edging is molded twice then molecularly bonded for extra durability and protection. A tough inner core is surrounded with our soft white vinyl for extra cushion against tough docks. Each piece installs easily to the edges of dock piers or floats with screws or nails.
White, Medium Double Molded Vinyl Dock Edging. 10' Coil - 46096 - 32-46096F1
Double molded vinyl dock edging is molded twice then molecularly bonded for extra durability and protection. A tough inner core is surrounded with our soft white vinyl for extra cushion against tough docks. Each piece installs easily to the edges of dock piers or floats with screws or nails.
Triangle Dock Box 54Wx33Dx27H - 83561 - 32-83561F1
These fiberglass dock boxes are built tough. With a UV gelcoat finish and the stainless steel lockable latch and hardware, these are sure to hold up in the harshest marine environments. They incorporate gas shock lifts, which come standard on all models. These shocks help to keep your lid open on rocking docks and in higher wind areas. Smooth surface interior finish.
Top Seatlg. Dk Bx 72Wx29Dx29H - 83555 - 32-83555F1
These fiberglass dock boxes are built tough. With a UV gelcoat finish and the stainless steel lockable latch and hardware, these are sure to hold up in the harshest marine environments. They incorporate gas shock lifts, which come standard on all models. These shocks help to keep your lid open on rocking docks and in higher wind areas. Smooth surface interior finish.
Top Seat Sml Dk Bx 46Wx26Dx27H - 83556 - 32-83556F1
These fiberglass dock boxes are built tough. With a UV gelcoat finish and the stainless steel lockable latch and hardware, these are sure to hold up in the harshest marine environments. They incorporate gas shock lifts, which come standard on all models. These shocks help to keep your lid open on rocking docks and in higher wind areas. Smooth surface interior finish.
Tayor Perimeter Removable Post Bumper - White - Rpb4.45 - 32-Rpb445F1
Protects your boat at unfamiliar or unprotected docks. Polyester 53 length webbing and a heavy-duty delrin buckle system makes installation quick, easy and secure. Great for temporary docking or portable docks.
Tayor Perimeter Removable Post Bumper - White - Rpb4.30 - 32-Rpb430F1
Protects your boat at unfamiliar or unprotected docks. Polyester 53 length webbing and a heavy-duty delrin buckle system makes installation quick, easy and secure. Great for temporary docking or portable docks.
Tayor Perimeter Removable Post Bumper - White - Rpb3.30 - 32-Rpb330F1
Protects your boat at unfamiliar or unprotected docks. Polyester 53 length webbing and a heavy-duty delrin buckle system makes installation quick, easy and secure. Great for temporary docking or portable docks.
Taylormade Platinum Series Pontoon Furniture, Medium Bench Seat, Beige - 433061 - 537-433061F1
Designed to seamlessly integrate with all lines of pontoon seating available in the marine market.Relax and unwind on the bench seating that sets the industry standard. Our rotationally-molded bench seating frames and bases allow for the most seating support and storage capacity within the marine and pontoon furniture industryRotationally-molded, marine grade polyethylene frame, designed to resist warping with thicker polyethylene walls, added support and uniqueMultiple foam densities provide support and comfort. Furniture depths and heights are sized for comfort onboardPremium marine grade vinylMildew, UV resistant laminated vinylBonded, polyester, color fast, UV-resistant threadsMildew resistant polyurethane foamLarge dry storage area under hinged seats, livewell ready compartments, channels built into the bases assist with drainageAluminum seat hingesStainless steel staples & mounting fastenersPontoon bench seating is not freestanding and must have railing support for proper installation.
Taylorchromed Zamak Side Mount Deck Hinge (Sold As Pair) - 1205 - 32-1205F1
Mounts vertically. Hardware not included.
Taylor White Twin-Flap Vinyl Deck Channel 1/4" W X 5/8" H X 110" L - 826500 - 32-826500F1
Punched to accommodate hidden fasteners or external angles. Comes in coils.
Taylor Vinyl Covered Pwc Fender - 346 - 32-346F1
All vinyl covered fenders contain high-density closed cell polyethylene foam, covered in a tough UV resistant and tear proof vinyl/polyester tri-laminate blend covering. Corrosion-proof grommets make attachment easy for any application. Hinges in center for better protection againts docks designed for bigger boatsHooks under rub rail with a molded hook integrated on back of fenderThe Blocks anchors fender strap perfectly
Taylor Vinyl Coated Foam Life Ring, 24" White W/White Rope, 6/Case - 361 - 32-361F1
Inspected and tested in accordance with U. S. Coast Guard regulations. Rings contain unicellular polyurethane foam for buoyancy. Molded-in becket design means there are no straps to wear, mildew, or deteriorate. Vinyl coated foam.
Taylor Vinyl Coated Foam Life Ring, 24" Orange W/White Rope, 6/Case - 364 - 32-364F1
Inspected and tested in accordance with U. S. Coast Guard regulations. Rings contain unicellular polyurethane foam for buoyancy. Molded-in becket design means there are no straps to wear, mildew, or deteriorate. Vinyl coated foam.
Taylor Vinyl Coated Foam Life Ring, 20" White W/White Rope, 6/Case - 360 - 32-360F1
Inspected and tested in accordance with U. S. Coast Guard regulations. Rings contain unicellular polyurethane foam for buoyancy. Molded-in becket design means there are no straps to wear, mildew, or deteriorate. Vinyl coated foam.
Taylor Vinyl Coated Foam Life Ring, 20" White W/White Rope, 1/Case - 365 - 32-365F1
Inspected and tested in accordance with U. S. Coast Guard regulations. Rings contain unicellular polyurethane foam for buoyancy. Molded-in becket design means there are no straps to wear, mildew, or deteriorate. Vinyl coated foam.
Taylor Vinyl Coated Foam Life Ring, 20" Orange W/White Rope, 6/Case - 363 - 32-363F1
Inspected and tested in accordance with U. S. Coast Guard regulations. Rings contain unicellular polyurethane foam for buoyancy. Molded-in becket design means there are no straps to wear, mildew, or deteriorate. Vinyl coated foam.
Taylor Tuff End Buoy - 61155 - 32-61155F1
Tuff End fender ends are made from injection molded vinyl tested to 2000 psi tensile strength.Features: large line holes that will accept standard shackles. The curved design hole prevents chafing.
Taylor Tuff End Buoy - 61152 - 32-61152F1
Tuff End fender ends are made from injection molded vinyl tested to 2000 psi tensile strength.Features: large line holes that will accept standard shackles. The curved design hole prevents chafing.
Taylor Tuff End Buoy - 61149 - 32-61149F1
Tuff End fender ends are made from injection molded vinyl tested to 2000 psi tensile strength.Features: large line holes that will accept standard shackles. The curved design hole prevents chafing.
Taylor Tuff End Buoy - 61146 - 32-61146F1
Tuff End fender ends are made from injection molded vinyl tested to 2000 psi tensile strength.Features: large line holes that will accept standard shackles. The curved design hole prevents chafing.
Taylor Tuff End Buoy - 61143 - 32-61143F1
Tuff End fender ends are made from injection molded vinyl tested to 2000 psi tensile strength.Features: large line holes that will accept standard shackles. The curved design hole prevents chafing.
Taylor Tuff End Buoy - 61140 - 32-61140F1
Tuff End fender ends are made from injection molded vinyl tested to 2000 psi tensile strength.Features: large line holes that will accept standard shackles. The curved design hole prevents chafing.
Taylor Tuff End Buoy - 1155 - 32-1155F1
Tuff End fender ends are made from injection molded vinyl tested to 2000 psi tensile strength. Featureslarge line holes that will accept standard shackles. The curved design hole prevents chafing.
Taylor Tuff End Buoy - 1152 - 32-1152F1
Tuff End fender ends are made from injection molded vinyl tested to 2000 psi tensile strength. Featureslarge line holes that will accept standard shackles. The curved design hole prevents chafing.
Taylor Tuff End Buoy - 1149 - 32-1149F1
Tuff End fender ends are made from injection molded vinyl tested to 2000 psi tensile strength. Featureslarge line holes that will accept standard shackles. The curved design hole prevents chafing.
Taylor Tuff End Buoy - 1146 - 32-1146F1
Tuff End fender ends are made from injection molded vinyl tested to 2000 psi tensile strength. Featureslarge line holes that will accept standard shackles. The curved design hole prevents chafing.
Taylor Tuff End Buoy - 1143 - 32-1143F1
Tuff End fender ends are made from injection molded vinyl tested to 2000 psi tensile strength. Featureslarge line holes that will accept standard shackles. The curved design hole prevents chafing.
Taylor Tuff End Buoy - 1140 - 32-1140F1
Tuff End fender ends are made from injection molded vinyl tested to 2000 psi tensile strength. Featureslarge line holes that will accept standard shackles. The curved design hole prevents chafing.
Taylor Trolling Motor Prop Cover, 3 Blade, 10" Dia. - 357 - 32-357F1
Extend the life of your boat cover by protecting it from wear and tear caused by sharp edges on your trolling motor prop. Made from heavy duty marine-grade vinyl. Protect your cover from prop blade wear.
Taylor Trolling Motor Prop Cover, 3 Blade, 10" Dia. - 355 - 32-355F1
Extend the life of your boat cover by protecting it from wear and tear caused by sharp edges on your trolling motor prop. Made from heavy duty marine-grade vinyl. Protect your cover from prop blade wear.
Taylor Trolling Motor Prop Cover, 2 Blade, 12" - 257 - 32-257F1
Extend the life of your boat cover by protecting it from wear and tear caused by sharp edges on your trolling motor prop. Made from heavy duty marine-grade vinyl. Protect your cover from prop blade wear.
Taylor Trolling Motor Prop Cover, 2 Blade, 12" - 255 - 32-255F1
Extend the life of your boat cover by protecting it from wear and tear caused by sharp edges on your trolling motor prop. Made from heavy duty marine-grade vinyl. Protect your cover from prop blade wear.
Taylor Triple Chrome Plated Flag Pole Socket - 962 - 32-962F1
Taylor Triple Chrome Plated Flag Pole Socket 1" Slanted.
Taylor Triangular Sail Shade, 16'5",Perfect For Your Yacht - 12021 - 32-12021F1
Perfect for your yacht, backyard, pool, patio, picnic area, anywhere shade is needed!Long-lasting knitted polyethylene fabric allows rain to pass through so no pooling water can occurBreathable Shade allows refreshing breezes to flow through while reducing temperatures underneath by up to 30%Stylish and versatile protection from up to 90% of harmful UV raysHeavy duty stainless steel D-ringsMounting hardware sold separately
Taylor Triangular Sail Shade, 12' - 12022 - 32-12022F1
Perfect for your yacht, backyard, pool, patio, picnic area, anywhere shade is needed! Long-lasting knitted polyethylene fabric allows rain to pass through so no pooling water can occurBreathable Shade allows refreshing breezes to flow through while reducing temperatures underneath by up to 30%Stylish and versatile protection from up to 90% of harmful UV raysHeavy duty stainless steel D-ringsMounting hardware sold separately
Taylor Transom Fender 10" X 22" White - 56090 - 32-56090F1
Shaped to fit the stern of a sailboat or the edge of most swim platforms up to 4" thick. An integral 3/4" diameter tube allows a securing line to pass from end to end while a countered shape helps grip the fendering location. Inflation valve to adjust the level of firmness to satisfy all applications.
Taylor Trailerite Pro Series Bass Boat Cover, Silver - 88204Hl - 32-88204Hlf1
Pro Series Covers feature Silver reflective, heavy-duty 600-denier marine-grade 100% polyester fabric. This fabric is the right choice for protecting your boat during highway trailering, on a leisurely jaunt to the lake or sitting in your back yard. 1" webbing sewn into the hem with 2 stern ratchets to ensure the most secure fit available. Stern ratchets are encased in a protective hook n' loop sleeve for additional protection. Two removable quick-release 2" wide belly straps help eliminate stress and prevents abrasion to your boat's finish. Accommodates a traditional port mounted trolling motor. Reinforced to protect cover from wear. 2" Wide strip of reflective tape on stern for additional visibility. Semi Custom Fit will accommodate port, starboard, or dual console steering. 5-Year Limited Warranty.
Taylor Trailerite Pro Series Bass Boat Cover, Silver - 88200Hl - 32-88200Hlf1
Pro Series Covers feature Silver reflective, heavy-duty 600-denier marine-grade 100% polyester fabric. This fabric is the right choice for protecting your boat during highway trailering, on a leisurely jaunt to the lake or sitting in your back yard. 1" webbing sewn into the hem with 2 stern ratchets to ensure the most secure fit available. Stern ratchets are encased in a protective hook n' loop sleeve for additional protection. Two removable quick-release 2" wide belly straps help eliminate stress and prevents abrasion to your boat's finish. Accommodates a traditional port mounted trolling motor. Reinforced to protect cover from wear. 2" Wide strip of reflective tape on stern for additional visibility. Semi Custom Fit will accommodate port, starboard, or dual console steering. 5-Year Limited Warranty.
Taylor Trailerite Pro Series Bass Boat Cover, Silver - 32-88203Hl - 32-88203Hlf1
Pro Series Covers feature Silver reflective, heavy-duty 600-denier marine-grade 100% polyester fabric. This fabric is the right choice for protecting your boat during highway trailering, on a leisurely jaunt to the lake or sitting in your back yard. 1" webbing sewn into the hem with 2 stern ratchets to ensure the most secure fit available. Stern ratchets are encased in a protective hook n' loop sleeve for additional protection. Two removable quick-release 2" wide belly straps help eliminate stress and prevents abrasion to your boat's finish. Accommodates a traditional port mounted trolling motor. Reinforced to protect cover from wear. 2" Wide strip of reflective tape on stern for additional visibility. Semi Custom Fit will accommodate port, starboard, or dual console steering. 5-Year Limited Warranty.
Taylor Traditional Sur-Moor Mooring Buoy - White With Blue Reflective Striping - 22174 - 32-22174F1
Puncture proof and almost indestructible buoys features hot-dipped galvanized steel mounting hardware. Blue reflective stripe for nighttime visibility. Sandblasted finish. 3-Year flotation warranty on all Taylor hard skin buoys.
Taylor Traditional Sur-Moor Mooring Buoy - White With Blue Reflective Striping - 22172 - 32-22172F1
Puncture proof and almost indestructible buoys features hot-dipped galvanized steel mounting hardware. Blue reflective stripe for nighttime visibility. Sandblasted finish. 3-Year flotation warranty on all Taylor hard skin buoys.
Taylor Traditional Sur-Moor Mooring Buoy - White With Blue Reflective Striping - 22171 - 32-22171F1
Puncture proof and almost indestructible buoys features hot-dipped galvanized steel mounting hardware. Blue reflective stripe for nighttime visibility. Sandblasted finish. 3-Year flotation warranty on all Taylor hard skin buoys.
Taylor Traditional Sur-Moor Mooring Buoy - White With Blue Reflective Striping - 22170 - 32-22170F1
Puncture proof and almost indestructible buoys features hot-dipped galvanized steel mounting hardware. Blue reflective stripe for nighttime visibility. Sandblasted finish. 3-Year flotation warranty on all Taylor hard skin buoys.
Taylor Traditional Stainless Steel Fender Lock For Rope Up To 1/4" (One Lock And Peg) - 1010 - 32-1010F1
Low profile stainless steel peg and bases make hanging fenders fast and easy. The peg fits in old style fender lock brackets. Set includes peg, bracket and screws. Rope size up to 1/4".
Taylor Tidy-Ups Vinyl Line Holder White - 1101 - 32-1101F1
Rail mount UV resistant vinyl strap securely holds rope, cords, etc.
Taylor Tidy-Ups Vinyl Line Holder White - 1019 - 32-1019F1
Rail mount UV resistant vinyl strap securely holds rope, cords, etc.
Taylor Tidy-Ups Vinyl Fender Adjuster - 1018 - 32-1018F1
Vinyl fender adjusters simply snap over lifelines or railings and are ready to use.
Taylor Tidy-Ups Vinyl Fender Adjuster - 1016 - 32-1016F1
Vinyl fender adjusters simply snap over lifelines or railings and are ready to use.
Taylor Tidy-Ups Vinyl Fender Adjuster - 1015 - 32-1015F1
Vinyl fender adjusters simply snap over lifelines or railings and are ready to use.
Taylor Tidy-Ups Fender Adjuster Kit - 1133 - 32-1133F1
Tidy-Ups™ Kits include (1) Tidy-Ups™ Fender Adjuster and (6) feet of 3/8" solid braid polypropylene rope. Made from high quality marine grade components, they are quick and easy to use. Simply snap adjuster over your lifeline, railing, or stanchion and set fender height in an instant. It will not fade or kink, and is mildew and rot resistant. A pre-spliced and professionally finished end allows your fender to be tightly secured without hard-to-untie knots.
Taylor Tidy-Ups Fender Adjuster Kit - 1131 - 32-1131F1
Tidy-Ups™ Kits include (1) Tidy-Ups™ Fender Adjuster and (6) feet of 3/8" solid braid polypropylene rope. Made from high quality marine grade components, they are quick and easy to use. Simply snap adjuster over your lifeline, railing, or stanchion and set fender height in an instant. It will not fade or kink, and is mildew and rot resistant. A pre-spliced and professionally finished end allows your fender to be tightly secured without hard-to-untie knots.
Taylor Terry Cloth Back To Back Lounge Seat Cover 18" H X 20" W X 40" D - 11997 - 32-11997F1
These soft, terry cloth lounge seat covers are designed to protect your seats from damaging UV, wind, mildew, and water to keep them from cracking and fading. They are completely washable and have an elastic hem for a secure fit.
Taylor Terry Cloth Back To Back Lounge Seat Cover 18" H X 20" W X 40" D - 11994 - 32-11994F1
These soft, terry cloth lounge seat covers are designed to protect your seats from damaging UV, wind, mildew, and water to keep them from cracking and fading. They are completely washable and have an elastic hem for a secure fit.
Taylor Teak Flag Pole - 60756 - 32-60756F1
Teak flag pole offers traditional beauty because of its intricate grain patterns and color variations. The high oil content of the wood keeps it from deteriorating or warping in the harsh marine environment of sun, wind, and water. Teak's natural oils and Silica make it impervious to insects and wood rot. No deteriorating or warping.
Taylor Teak Flag Pole - 60754 - 32-60754F1
Teak flag pole offers traditional beauty because of its intricate grain patterns and color variations. The high oil content of the wood keeps it from deteriorating or warping in the harsh marine environment of sun, wind, and water. Teak's natural oils and Silica make it impervious to insects and wood rot. No deteriorating or warping.
Taylor Teak Flag Pole - 60752 - 32-60752F1
Teak flag pole offers traditional beauty because of its intricate grain patterns and color variations. The high oil content of the wood keeps it from deteriorating or warping in the harsh marine environment of sun, wind, and water. Teak's natural oils and Silica make it impervious to insects and wood rot. No deteriorating or warping.
Taylor Teak Flag Pole - 60750 - 32-60750F1
Teak flag pole offers traditional beauty because of its intricate grain patterns and color variations. The high oil content of the wood keeps it from deteriorating or warping in the harsh marine environment of sun, wind, and water. Teak's natural oils and Silica make it impervious to insects and wood rot. No deteriorating or warping.
Taylor Teak Flag Pole - 60749 - 32-60749F1
Teak flag pole offers traditional beauty because of its intricate grain patterns and color variations. The high oil content of the wood keeps it from deteriorating or warping in the harsh marine environment of sun, wind, and water. Teak's natural oils and Silica make it impervious to insects and wood rot. No deteriorating or warping.
Taylor T3C Mooring Collar - 33028 - 32-33028F1
Protects your buoy from anchor chain wear, prolonging the life of the buoy. Designed to work in combination with standard shackles. Sized to slip into the top of 2 tube. Hot-dip galvanized steel.
Taylor T3C Mooring Collar - 33025 - 32-33025F1
Protects your buoy from anchor chain wear, prolonging the life of the buoy. Designed to work in combination with standard shackles. Sized to slip into the top of 2 tube. Hot-dip galvanized steel.
Taylor T3C Mooring Collar - 33020 - 32-33020F1
Protects your buoy from anchor chain wear, prolonging the life of the buoy. Designed to work in combination with standard shackles. Sized to slip into the top of 2 tube. Hot-dip galvanized steel.
Taylor Surface Mount 3-Pack Extension - 46309 - 32-46309F1
Quickly add more lights to your surface mounted wired light set. This pack of three additional lights easily connects to your existing lights. You can add up to two extension packs, running a total of nine lights off one solar panel.
Taylor Sur-Moor T3C Mooring Buoy - White With Blue Reflective Striping - 46375 - 32-46375F1
Hard skin mooring buoys have a seamless and tough, one-piece polyethylene shell. Hard skin shells feature ultraviolet light absorbers for long-term life under the sun. Filled with EPS foam to positively displace water. Tube-through-the-center design. Three-Year Flotation warranty. Textured finish to enhance paint adhesion. Hardware not included. Mooring chain should be 1/2" smaller in width than the tube I.D.Chain length is normally 1.5 x water depthThe chain weight should not be greater than 1/2 the buoyancy rating of the buoy
Taylor Sur-Moor T3C Mooring Buoy - White With Blue Reflective Striping - 46374 - 32-46374F1
Hard skin mooring buoys have a seamless and tough, one-piece polyethylene shell. Hard skin shells feature ultraviolet light absorbers for long-term life under the sun. Filled with EPS foam to positively displace water. Tube-through-the-center design. Three-Year Flotation warranty. Textured finish to enhance paint adhesion. Hardware not included. Mooring chain should be 1/2" smaller in width than the tube I.D.Chain length is normally 1.5 x water depthThe chain weight should not be greater than 1/2 the buoyancy rating of the buoy
Taylor Sur-Moor T3C Mooring Buoy - White With Blue Reflective Striping - 46372 - 32-46372F1
Hard skin mooring buoys have a seamless and tough, one-piece polyethylene shell. Hard skin shells feature ultraviolet light absorbers for long-term life under the sun. Filled with EPS foam to positively displace water. Tube-through-the-center design. Three-Year Flotation warranty. Textured finish to enhance paint adhesion. Hardware not included. Mooring chain should be 1/2" smaller in width than the tube I.D.Chain length is normally 1.5 x water depthThe chain weight should not be greater than 1/2 the buoyancy rating of the buoy
Taylor Sur-Moor T3C Mooring Buoy - White With Blue Reflective Striping - 46371 - 32-46371F1
Hard skin mooring buoys have a seamless and tough, one-piece polyethylene shell. Hard skin shells feature ultraviolet light absorbers for long-term life under the sun. Filled with EPS foam to positively displace water. Tube-through-the-center design. Three-Year Flotation warranty. Textured finish to enhance paint adhesion. Hardware not included. Mooring chain should be 1/2" smaller in width than the tube I.D.Chain length is normally 1.5 x water depthThe chain weight should not be greater than 1/2 the buoyancy rating of the buoy
Taylor Sur-Moor T3C Mooring Buoy - White With Blue Reflective Striping - 46370 - 32-46370F1
Hard skin mooring buoys have a seamless and tough, one-piece polyethylene shell. Hard skin shells feature ultraviolet light absorbers for long-term life under the sun. Filled with EPS foam to positively displace water. Tube-through-the-center design. Three-Year Flotation warranty. Textured finish to enhance paint adhesion. Hardware not included. Mooring chain should be 1/2" smaller in width than the tube I.D.Chain length is normally 1.5 x water depthThe chain weight should not be greater than 1/2 the buoyancy rating of the buoy
Taylor Sur-Moor Shackle Buoy - White With Blue Reflective Striping - 46818 - 32-46818F1
The rope nest design has a built in cup shape at the top of the buoy that allows the anchor shackle to nest below the buoy surface. This recessed area helps shield the shackle from contacting the boat hull while making a convenient nesting place for the pennant line when the boat departs from the mooring. The hard-skin polyethylene shell is UV protected to resist the weathering effects of sunlight and is foam filled to positively displace water. Sandblasted finish. Tube Through-The-Center design with blue reflective striping. Shackle and hardware not included. T3C mooring collar recommended.
Taylor Sur-Mark Ii Marker Buoy 61" (Label Sold Separately) - 46103 - 32-46103F1
Made out of white polyethylene with closed cell foam inside. 37" shows above the water line. Accepts all Sur-Mark™ warning labels, not included.
Taylor Sur-Mark Buoy Label 13" X 24" Fits Sur-Mark Or Sur-Mark Ii (Sold In Pairs) - 46185 - 32-46185F1
Fade resistant and highly visible. Two labels required per buoy. Self adhesive.
Taylor Sur-Mark Buoy Label 13" X 24" Fits Sur-Mark Or Sur-Mark Ii (Sold In Pairs) - 46181 - 32-46181F1
Fade resistant and highly visible. Two labels required per buoy. Self adhesive.
Taylor Sur-Mark Buoy Label 13" X 24" Fits Sur-Mark Or Sur-Mark Ii (Sold In Pairs) - 46180 - 32-46180F1
Fade resistant and highly visible. Two labels required per buoy. Self adhesive.
Taylor Sully Stick Winter Stick - 22120 - 32-22120F1
Sully Stick™ winter stick - A long tapered buoy used in place of a standard round mooring buoy during the winter months. The Sully Stick has a molded in eyelet at the top for easy retrieval. The base eyelet is reinforced with a galvanized metal bushing to attach a rope and connect to the anchor chain. The shape of the Sully stick helps it escape ice entrapment better than a round buoy and can extend the useful life of a mooring buoy by protecting it from the damaging effects of freezing temperatures.
Taylor Stepsafe Single Tread Dock Step 22" L X 18" W X 11.5" H - White With Black Non-Slip Pad - 47100 - 32-47100F1
Molded in durable UV resistant polyethylene with non-slip pad on top of each step. 1-1/2" wide flange provides adequate mounting surface for docks. Hand rails are available for two and three step models, sold separately.
Taylor Stepsafe Non-Slip Pad 3-1/2" X 14-1/2" - Black - 11990 - 32-11990F1
Step with comfort and safety, wet or dry. Use on swim platforms, stair rungs, transoms or anywhere you step and could slip. Padded.
Taylor Standard Mooring Whips With Fixed 60° Angle Base (Sold In Pairs) For Boats Up To 29'-33' - Mw.160 - 32-Mw160F1
Mooring whips are a safe way to protect your boat against costly dockside and seawall damage. The Mooring Whip system pulls your boat a safe, convenient distance away from the dock thereby protecting it from the damaging forces of waves, wind, tides and wakes. Mooring Whips are made of high quality, solid fiberglass poles, aluminum- magnesium base units, tips, and mooring whip lines. Each set comes complete with all of the hardware necessary for installation.Standard mooring whips are equipped with fixed angle bases with a 60° angle, 13?16" diameter fiberglass poles and are most commonly used for ski boats, runabouts, center consoles, and bass boats in moderate wake areas. Sold in pairs.
Taylor Standard Mooring Whips With Fixed 60° Angle Base (Sold In Pairs) For Boats Up To 24'-28' - Mw.140 - 32-Mw140F1
Mooring whips are a safe way to protect your boat against costly dockside and seawall damage. The Mooring Whip system pulls your boat a safe, convenient distance away from the dock thereby protecting it from the damaging forces of waves, wind, tides and wakes. Mooring Whips are made of high quality, solid fiberglass poles, aluminum- magnesium base units, tips, and mooring whip lines. Each set comes complete with all of the hardware necessary for installation.Standard mooring whips are equipped with fixed angle bases with a 60° angle, 13?16" diameter fiberglass poles and are most commonly used for ski boats, runabouts, center consoles, and bass boats in moderate wake areas. Sold in pairs.
Taylor Standard Mooring Whips With Fixed 60° Angle Base (Sold In Pairs) For Boats Up To 20' - Mw.080 - 32-Mw080F1
Mooring whips are a safe way to protect your boat against costly dockside and seawall damage. The Mooring Whip system pulls your boat a safe, convenient distance away from the dock thereby protecting it from the damaging forces of waves, wind, tides and wakes. Mooring Whips are made of high quality, solid fiberglass poles, aluminum- magnesium base units, tips, and mooring whip lines. Each set comes complete with all of the hardware necessary for installation.Standard mooring whips are equipped with fixed angle bases with a 60° angle, 13?16" diameter fiberglass poles and are most commonly used for ski boats, runabouts, center consoles, and bass boats in moderate wake areas. Sold in pairs.
Taylor Standard Mooring Whips With Fixed 60° Angle Base (Sold In Pairs) For Boats Up To 18'-23' - Mw.120 - 32-Mw120F1
Mooring whips are a safe way to protect your boat against costly dockside and seawall damage. The Mooring Whip system pulls your boat a safe, convenient distance away from the dock thereby protecting it from the damaging forces of waves, wind, tides and wakes. Mooring Whips are made of high quality, solid fiberglass poles, aluminum- magnesium base units, tips, and mooring whip lines. Each set comes complete with all of the hardware necessary for installation.Standard mooring whips are equipped with fixed angle bases with a 60° angle, 13?16" diameter fiberglass poles and are most commonly used for ski boats, runabouts, center consoles, and bass boats in moderate wake areas. Sold in pairs.
Taylor Stainless Steel Top-Lok For Heavy 1" Round Trim (4 Per Pack) - 1348 - 32-1348F1
Has stud portion affixed. For heavy 1" round trim. Snaps on windshield frame.
Taylor Stainless Steel Top-Lok For Heavy 1" Round Trim (4 Per Pack) - 1344 - 32-1344F1
Has stud portion affixed. For heavy 1" round trim. Snaps on windshield frame.
Taylor Stainless Steel Top Mount Flag Pole Socket For 1-1/4" Poles, 10 Degree Angle - 966 - 32-966F1
Made from 316 polished stainless steel.
Taylor Stainless Steel Rail Mount Pulpit Staff 15" Long With Nylon Rail Clamp For 7/8" To 1-1/4" Rails - 971 - 32-971F1
Stainless steel. Complete with split rings and nylon rail clamp. Designed for round rails only.
Taylor Stainless Steel Rail Mount Flag Socket Fits 3/4" To 7/8" Poles And Mounts To 7/8" To 1-1/4" Rails - 968 - 32-968F1
Mounts to 7/8" to 1-1/4" round rails only. T304 Stainless Steel. Adjusts to any angle.
Taylor Stainless Steel Rail Mount Flag Pole Socket For 1" Diameter Flag Poles - 974 - 32-974F1
Stainless steel mounts will look great and provide years of service. Both models are perpendicular to the rail and are made for 1" diameter flag poles. Round rails only.
Taylor Stainless Steel Rail Mount Flag Pole Socket For 1" Diameter Flag Poles - 973 - 32-973F1
Stainless steel mounts will look great and provide years of service. Both models are perpendicular to the rail and are made for 1" diameter flag poles. Round rails only.
Taylor Stainless Steel Fender Rack - 3011 - 32-3011F1
A convenient place to stow fenders. Mounts on any rail and stanchion system. Movable J hooks mount on 1" - 1-1/8" rails and stanchion system, tightens to blend with any angle. Cross-reinforced for extra strength. Holds any style fender.Holds "Big B" and "Hull Gard" fenders effectively. Folds flat for easy storage.
Taylor Stainless Steel Fender Rack - 2011 - 32-2011F1
A convenient place to stow fenders. Mounts on any rail and stanchion system. Movable J hooks mount on 1" - 1-1/8" rails and stanchion system, tightens to blend with any angle. Cross-reinforced for extra strength. Holds any style fender.Holds "Big B" and "Hull Gard" fenders effectively. Folds flat for easy storage.
Taylor Stainless Steel Fender Rack - 2009 - 32-2009F1
A convenient place to stow fenders. Mounts on any rail and stanchion system. Movable J hooks mount on 1" - 1-1/8" rails and stanchion system, tightens to blend with any angle. Cross-reinforced for extra strength. Holds any style fender.Holds "Big B" and "Hull Gard" fenders effectively. Folds flat for easy storage.
Taylor Stainless Steel Fender Lock For Rope Up To 1/2" - 1001 - 32-1001F1
Taylor Made has designed a larger version of it's best selling 1010 fender adjuster. Stainless steel construction, adjustment peg, and fastening screws insure many years of dependable service in the harsh marine environment. The "one-way" locking peg provides secure and reliable mounting and allows the use of up to 1/2" diameter rope.
Taylor Stainless Steel Dog Snap (2 Per Pack) - 1340 - 32-1340F1
1" stainless steel snap.
Taylor Stainless Steel Clinching Rings (Pack Of 50) - 1045 - 32-1045F1
Taylor Stainless Steel Clinching Rings. Fits 3/8"-1/2" cord. (Pack of 50)
